Activity
From 2019-03-19 to 2019-04-17
2019-04-17
-
11:59 PM Bug report #21872 (Closed): QGIS 3.7 did not start because an error message
- Applied in changeset commit:qgis|3d7c711db087a9ea515f0fba8e8b0abf4eb50761.
-
- Applied in changeset commit:qgis|3d7c711db087a9ea515f0fba8e8b0abf4eb50761.
-
- Duplicate of #21774 - apparently reintroduced by commit:e57d1e06f0 and/or commit:507e327c0c
-
11:49 AM Bug report #21872 (Closed): QGIS 3.7 did not start because an error message
- QGIS does not start properly and gives following error message:...
-
11:03 PM Feature request #15652: Add option for OGR data sources to be opened in read only mode
- This would also fix #17980 :)
-
- Dragging layers too high in layers panel will reload(?) them, potentially losing data
1. Have at least two layers ... -
- Oops, missed that @Concave hull (k-nearest neighbor)@ supports it too. I can only update the title, sorry about the w...
-
- @Concave hull (alpha shapes)@ and @Concave hull (k-nearest neighbor)@ should allow creating separate hulls for each v...
-
- @Concave hull (alpha shapes)@ should support any geometry just like @Concave hull (k-nearest neighbor)@, @Convex hull...
-
- Looks like this should have been re-opened back then. BUT I just tried reproducing and had no issues in 3.6 with neit...
-
- Those tools are a bit messy in what they support and what not, I am sure a homogenisation would be good.
You can u... -
07:26 PM Bug report #21876: Crashes when loading qml style for point layer
*Stack Trace*...-
- When loading a qml style file for a point layer, QGIS crashes :
This qml file was exported from a point layer which ... -
07:24 PM Bug report #19282: Data-defined legend is broken if "map units" are used
- I can confirm that this is still an issue in current master
!legend_broken.PNG! -
- I can confirm that this is still an issue in current master
!legend_broken.PNG! -
- I can confirm that this is still an issue in current master
!legend_broken.PNG! -
- I can confirm that this is still an issue in current master
!legend_broken.PNG! -
06:10 PM Feature request #21875 (Open): add support for "triangles" PostGIS geometry type
- I have a table of TRIANGLE's in PostGIS. QGIS shows it as Polygon layer, and when I click using Idenify tool on trian...
-
05:02 PM Bug report #21839: QgsDataSourceUri parameter checkPrimaryKeyUnicity is ignored for postgres prov...
- And in I confirm that whatever the "select at id" value you set, QGIS will still throw a `select count(distinct(..` q...
-
- >This did not make a difference when loading new PG layers
Giovanni Manghi wrote:
> Interesting... if this will not... -
04:28 PM Bug report #21874 (Feedback): Zoom to selection not always working
- "Zoom to selection" is not always working.
Sometimes, the map doesn't move at all and the selection is still out of ... -
04:26 PM Bug report #21873 (Open): Remove Added Vertex with Add Circular String
- Tool Add Circular String doesn't delete last vertex with "Del" or "Backspace" Key.
-
04:04 PM Bug report #21870 (Closed): ITEMFONTCOLOR ignored in GetLegendGraphic WMS
- Applied in changeset commit:qgis|7032db27fae9569efa73b4525963908241e67088.
-
- Applied in changeset commit:qgis|7032db27fae9569efa73b4525963908241e67088.
-
- PR https://github.com/qgis/QGIS/pull/9805
-
- PR https://github.com/qgis/QGIS/pull/9805
-
- PR https://github.com/qgis/QGIS/pull/9805
-
- ...
-
- Applied in changeset commit:qgis|7032db27fae9569efa73b4525963908241e67088.
-
- Applied in changeset commit:qgis|7032db27fae9569efa73b4525963908241e67088.
-
- PR https://github.com/qgis/QGIS/pull/9805
-
- PR https://github.com/qgis/QGIS/pull/9805
-
- It's not implemented in QGIS 3
-
01:10 PM Bug report #21863: issues with embedded layers
- Denis, I use the new layers support in embedded group as a feature, please do not remove.
-
09:40 AM Bug report #21869 (Open): "Advanced digitizing" panel doesn’t update itself to the active point o...
- If "Advanced digitizing" is turned on after inserting a vertex it doesnt work until inserting a new vertex.
And if a... -
08:59 AM Bug report #21868 (Open): default value + "apply default value on update" does not work when usin...
- 1) add a polygon layer
2) a column proper to receive values for the polygons areas, use the field calculator to comp... -
- if you have a locale that uses commas as decimal separator then manually editing values in the vertex editor does not...
-
08:50 AM Bug report #21866 (Closed): Crash after launching Field Calculator or Select Features with Expres...
- Whenever I press "Field Calculator" icon or "Select Features with Expression", no matter main taskbar or inside a tab...
-
- Applied in changeset commit:qgis|e8a7d0e979057e055efd6bf023bf076c2721a3cd.
-
- Applied in changeset commit:qgis|e8a7d0e979057e055efd6bf023bf076c2721a3cd.
-
- ogrinfo reports that it cannot read/open the shapefile, so it is normal it won't open in QGIS. The vector has issues ...
-
- ogrinfo reports that it cannot read/open the shapefile, so it is normal it won't open in QGIS. The vector has issues ...
-
02:31 AM Bug report #21865 (Closed): Can't add 538 redistricting shapefile as vector layer
- I'm trying to add shapefiles from the Atlas of Redistricting on FiveThirtyEight as vector layers to QGIS for a class ...
-
06:34 AM Bug report #21860 (Closed): Night Mapping Theme - Text Readability
- Applied in changeset commit:qgis|5ea0091583413e6e6d2a328fb1c40819222c7138.
-
- Applied in changeset commit:qgis|5ea0091583413e6e6d2a328fb1c40819222c7138.
2019-04-16
-
- Pietro Rossin wrote:
> Qgis 3.4.6 doesn't load a postgis view without an id and a geometry field (attributes only). ... -
- Pietro Rossin wrote:
> Qgis 3.4.6 doesn't load a postgis view without an id and a geometry field (attributes only). ... -
- Pietro Rossin wrote:
> Qgis 3.4.6 doesn't load a postgis view without an id and a geometry field (attributes only). ... -
- Pietro Rossin wrote:
> Qgis 3.4.6 doesn't load a postgis view without an id and a geometry field (attributes only). ... -
- Pietro Rossin wrote:
> Qgis 3.4.6 doesn't load a postgis view without an id and a geometry field (attributes only). ... -
10:24 AM Bug report #21858 (Feedback): QGIS crashes with PostgreSQL views
- Qgis 3.4.6 doesn't load a postgis view without an id and a geometry field (attributes only). DbManager says that the ...
-
- Tomás Carvalho wrote:
> OK I understand, but the maximum size is limited here.
> So, I put all files on this we tra... -
08:36 PM Bug report #21855: Bad Allocation - Report Composer
- OK I understand, but the maximum size is limited here.
So, I put all files on this we transfer link: https://we.tl/t... -
- Tomás Carvalho wrote:
> Apologize for that.
> Now I send data, project and metadata
sorry for bugging, the proje... -
- Apologize for that.
Now I send data, project and metadata -
- Apologize for that.
Now I send data, project and metadata -
- Apologize for that.
Now I send data, project and metadata -
- Apologize for that.
Now I send data, project and metadata -
- Apologize for that.
Now I send data, project and metadata -
- Tomás Carvalho wrote:
> Of course
> I am using 18 unique pages for this report that will be multiplied to 116 munic... -
- Tomás Carvalho wrote:
> Of course
> I am using 18 unique pages for this report that will be multiplied to 116 munic... -
- Of course
I am using 18 unique pages for this report that will be multiplied to 116 municipalities (2,088 pages).
I... -
- Of course
I am using 18 unique pages for this report that will be multiplied to 116 municipalities (2,088 pages).
I... -
- Of course
I am using 18 unique pages for this report that will be multiplied to 116 municipalities (2,088 pages).
I... -
- Please try with a new/clean qgis profile (no 3rd party plugins installed).
-
- Please try with a new/clean qgis profile (no 3rd party plugins installed).
-
- Please try with a new/clean qgis profile (no 3rd party plugins installed).
-
- Please try with a new/clean qgis profile (no 3rd party plugins installed).
-
10:08 PM Bug report #21864 (Feedback): Crash after quitting QGIS
- h2. User Feedback
Crash after quitting QGIS.
h2. Report Details
*Crash ID*: b11db3d431a36dd8fdf085fe4349919d... -
09:20 PM Bug report #21862 (Closed): "calculating fields" stuck in task manager
- This is already fixed
-
- This is already fixed
-
- seen/replicated also here, but not using the Processing tool (was using the field calculator from the main qgis vecto...
-
04:02 PM Bug report #21862 (Closed): "calculating fields" stuck in task manager
- I made a really simple test just getting the wkt of a geom with the field calculator, worked fine However I then got ...
-
- Marc Struelens wrote:
> Could you explain me more in detail? It's not about just removing the plug-ins I assume?
> ... -
05:08 PM Bug report #21846: Crash while closing QGIS
- Could you explain me more in detail? It's not about just removing the plug-ins I assume?
Do you have a link with exp... -
- Marc Struelens wrote:
> It just happened again...
> When closing a project, it crashes sometimes but not always.
>... -
- It just happened again...
When closing a project, it crashes sometimes but not always.
I can't try a new/clean qgis... -
05:18 PM Bug report #21863: issues with embedded layers
- Thanks Denis for reporting my issue here :)
Could you please tag it as a regression, since it was working fine in ... -
04:52 PM Bug report #21863 (Open): issues with embedded layers
- * visibility state is not saved (when embedding or when saving project) (see https://lists.osgeo.org/pipermail/qgis-d...
-
03:52 PM Bug report #21861 (Open): OGR Warning cannot open OUTPUT.file
- Hi,
I am using the Graphical Modeler in on MacOS High Sierra (version info below).
My models cannot seem to be ... -
- PR https://github.com/qgis/QGIS/pull/9790
-
- PR https://github.com/qgis/QGIS/pull/9790
-
This is wrong and will produce an invalid layer (there is not "GPX" provider, use "ogr" instead):...-
This is wrong and will produce an invalid layer (there is not "GPX" provider, use "ogr" instead):...-
This is wrong and will produce an invalid layer (there is not "GPX" provider, use "ogr" instead):...-
This is wrong and will produce an invalid layer (there is not "GPX" provider, use "ogr" instead):...-
This is wrong and will produce an invalid layer (there is not "GPX" provider, use "ogr" instead):...-
This is wrong and will produce an invalid layer (there is not "GPX" provider, use "ogr" instead):...-
- Found it in another part of QGIS
-
-
- I meant QGIS!
-
- Andreas Olsson wrote:
> Giovanni Manghi wrote:
> > isn't that a 3rd party plugin?
>
> No, it’s actually a part o... -
- Giovanni Manghi wrote:
> isn't that a 3rd party plugin?
No, it’s actually a part of QGIS. -
01:21 PM Bug report #21860 (Closed): Night Mapping Theme - Text Readability
- E.g. in the Protocol Window, protocol message timestamps and hyperlinks are almost unreadable with dark background.
-
01:14 PM Bug report #21859 (Closed): "File/folder Input" in processing won't separate input files into dis...
- When creating the model in processing with file input, desire behavior in batch mode is to select multiple files wher...
-
- Not reproducable in QGIS 3.6.1.
-
-
-
07:11 AM Bug report #21854: Add Grass raster layer with pyqgis 3 crash qgis
- Ok found here line 417 : https://trac.osgeo.org/qgis/browser/trunk/qgis/src/plugins/grass/qgsgrassplugin.cpp
Better ... -
- Giovanni Manghi wrote:
> are you trying to add a "grass raster layer" as if it was a normal file based raster datase... -
07:05 AM Bug report #21844: I get error message Invalid Layer When I add raster layer from DB_Manager in Q...
- Giovanni Manghi wrote:
> > I don't know why work for you perfect, I'd wish work for me like you but It didn't, but f...
2019-04-15
-
- Can you replicate the problem consistently? Is data dependent?
-
- Can you replicate the problem consistently? Is data dependent?
-
09:11 AM Bug report #21851 (Feedback): qgis crashed in add field text
- h2. User Feedback
I made the field text and the qgis crashed
h2. Report Details
*Crash ID*: dad62438aee5e342... -
- so isn't this a plugin issue? (I assume you are referring to a 3rd party qgis plugin, not a core one).
-
- h2. User Feedback
I was using a plugin to download some inspire data. As I aborted the process of the pluging qgis... -
- Also confirmed on Linux.
-
- Also confirmed on Linux.
-
10:52 PM Bug report #21857 (Open): QGIS crashes during map re-rendering after CRS switch
- h2. User Feedback
I'm using clean installment of QGIS (version 3.6.1) and base QGIS project from Natural Earth pac... -
> I don't know why work for you perfect, I'd wish work for me like you but It didn't, but for only work DB_Manager ...-
- Giovanni Manghi wrote:
> > Thank you much, I found out, When I select rater in DB_Manager and then right click on th... -
> Thank you much, I found out, When I select rater in DB_Manager and then right click on that and select add to Can...-
- Giovanni Manghi wrote:
> Navid Taheri wrote:
> > Giovanni Manghi wrote:
> > > I cannot confirm, downloaded a raste... -
- It's completely out of my league... just a hunch here... are you trying to add a "grass raster layer" as if it was a ...
-
- It's completely out of my league... just a hunch here... are you trying to add a "grass raster layer" as if it was a ...
-
- It's completely out of my league... just a hunch here... are you trying to add a "grass raster layer" as if it was a ...
-
- Step to reproduce :
- Open an empty project,
- Open python console,
- Add Raster layer with :
iface.addRasterL... -
- can you share the project and data?
-
- can you share the project and data?
-
- can you share the project and data?
-
- can you share the project and data?
-
- I'm trying to export a Report document in PDF and some times it works well.
But some times it causes 'Bad Allocation... -
- isn't that a 3rd party plugin?
-
- I love QCAD but I miss the ability to snap by length and perpendicular.
Who do I have to pay to make it happen? -
10:04 PM Bug report #21856 (Closed): QGIS crashed while using QgsVectorFileWriter
- QGIS consistently crashes when I run the following script in the Python console....
-
- Applied in changeset commit:qgis|0acc0565e43c354758386c81dc642749dab3984f.
-
- Applied in changeset commit:qgis|0acc0565e43c354758386c81dc642749dab3984f.
-
- PR https://github.com/qgis/QGIS/pull/9787
-
- PR https://github.com/qgis/QGIS/pull/9787
-
04:11 PM Bug report #21852 (Open): In Value Relation widget the new function current_value in filter expre...
- I'm not sure it's a bug, because the problem is a bit complex.
I am in a case where I have to initialize a field, ... -
09:48 AM Bug report #6889 (Closed): Loading PostGIS rasters do not work
- Confirmed, it works on QGIS 3.4.
Thanks. -
- Confirmed, it works on QGIS 3.4.
Thanks. -
- subject says it all
-
- the command is not created the right way, it must be something along this lines:
ogr2ogr -f PostgreSQL PG:"dbname=...
2019-04-14
-
- Navid Taheri wrote:
> Giovanni Manghi wrote:
> > I cannot confirm, downloaded a raster from the same source, loaded... -
- Giovanni Manghi wrote:
> I cannot confirm, downloaded a raster from the same source, loaded it in postgresql (used 9... -
- I cannot confirm, downloaded a raster from the same source, loaded it in postgresql (used 9 and 10) with raster2pgsql...
-
- They only show in DB Manager.
Apparently this is a long standing issue (tried on 2.14, 2.18 and 3.4/6). -
- I was able to add postgis rasters from DB manager without any issue in 3.6.1/Ubuntu and Windows. Please try and leave...
-
- Confirmed here on 3.6.1, very annoying indeed.
-
- Confirmed here on 3.6.1, very annoying indeed.
-
- Confirmed here on 3.6.1, very annoying indeed.
-
09:07 PM Bug report #21835: Plugin update progress dialog steals focus
- Unfortunately personally I have no time resources to improve this behaviour in the nearest future, but I'll keep it i...
-
- That's it! Thanks for describing it better than me. :)
-
- Does it happens always? is what a one time thing? can you try with a new/clean qgis profile (no 3rd party plugins ins...
-
- Does it happens always? is what a one time thing? can you try with a new/clean qgis profile (no 3rd party plugins ins...
-
- Does it happens always? is what a one time thing? can you try with a new/clean qgis profile (no 3rd party plugins ins...
-
- h2. User Feedback
I was closing the application after saving different layers in a geopackage (through toolbox pro...
2019-04-13
-
01:07 AM Bug report #21845 (Closed): Max scale is being reset to 1:100000 - Rule Based Symbology
- Max scale values above 1:100000 are being saved, but after edit the field is reset to 1:100000
-
02:56 PM Feature request #12890 (Closed): Add symbol for filtered layer in Layer list
- Just discovered that there is now a filter symbol in the layer list for filtered layers.
Many thanks for incorporati... -
- I got it. If you run "upgrade all upgradable plugins", for each of them a new modal modal window will be opened and c...
-
- Jürgen Fischer wrote:
> Navid Taheri wrote:
> > > Did you try starting with a fresh qgis profile (@qgis --profile f... -
- Navid Taheri wrote:
> > Did you try starting with a fresh qgis profile (@qgis --profile foo@)?
> I began qgis wi... -
- Jürgen Fischer wrote:
> Navid Taheri wrote:
> > I didn't any changes to file permission.
>
> I wasn't implying t... -
- I downloaded two rasters from site: srtm.csi.cgiar.org/srtmdata/ after that I did import them to my PostgreSQL databa...
2019-04-12
-
-
11:03 PM Bug report #21842 (Closed): Crashed while trying to close
- h2. User Feedback
Trying to close the program
h2. Report Details
*Crash ID*: 62f1fcd2045780cb9f127836e6b579b... -
- The setup:
- A QGIS project with a Print Layout.
- "Save paths" in the project's settings is set to "relative"
... -
10:30 PM Bug report #21837: QGIS 3+ Print Layout very-very slow zooming and manipulations with elements
- Giovanni Manghi wrote:
> so if this is isolated to an old computer means we can close this ticket?
>
So we can cl... -
- Evgeniy Z wrote:
> Giovanni Manghi wrote:
> > I can't replicate this here, would you mind attaching a sample projec... -
- Notice that rendering is quickly both in the main window and in the layout.
-
- Giovanni Manghi wrote:
> I can't replicate this here, would you mind attaching a sample project+data?
Sorry, I mi... -
- Giovanni Manghi wrote:
> I can't replicate this here, would you mind attaching a sample project+data?
Sorry, I mi... -
- Giovanni Manghi wrote:
> I can't replicate this here, would you mind attaching a sample project+data?
Sorry, I mi... -
- Mila C wrote:
> Giovanni Manghi wrote:
> > Have you followed the instructions here? https://gitlab.orfeo-toolbox.or... -
- Mila C wrote:
> Giovanni Manghi wrote:
> > Have you followed the instructions here? https://gitlab.orfeo-toolbox.or... -
05:59 PM Bug report #21803: error while trying to instal the OTB, can anybody help me to fix this ?
- Giovanni Manghi wrote:
> Have you followed the instructions here? https://gitlab.orfeo-toolbox.org/orfeotoolbox/qgis... -
- Solved:...
-
- Solved:...
-
- Unfortunately, it still does not work; from apache2 error log:...
-
04:44 PM Bug report #20091: WCS request for a GeoServer ImageMosaic reports invalid layer provider
- I have a bit of an update. Tried providing the same data in EPSG:3857 through Geoserver and it rendered properly with...
-
-
03:19 PM Bug report #21807: WFS update and delete transaction doesn't work (sometimes)
- It worked in 2.18, but AFAIK not in any of the 3.x versions
The error is elusive... You can make maybe 30 edits wo... -
- Navid Taheri wrote:
> I didn't any changes to file permission.
I wasn't implying that you did it willingly. sudo... -
- Jürgen Fischer wrote:
> Navid Taheri wrote:
> > Johannes Kroeger wrote:
> > > Have you tried turning your computer... -
- Navid Taheri wrote:
> Johannes Kroeger wrote:
> > Have you tried turning your computer off and on again? Have you t... -
- Johannes Kroeger wrote:
> Have you tried turning your computer off and on again? Have you tried reinstalling QGIS?
... -
03:03 PM Bug report #21819: gdal2tiles very slow compared to QGIS 2.18
- Giovanni Manghi wrote:
> Karsten Tebling wrote:
> > Giovanni Manghi wrote:
> > > Interesting:
> > >
> > > same... -
- Karsten Tebling wrote:
> Giovanni Manghi wrote:
> > Interesting:
> >
> > same exact command generated in both v... -
- Giovanni Manghi wrote:
> Interesting:
>
> same exact command generated in both versions?
>
> can you see any ... -
- Please try with a new/clean qgis profile, no 3rd party plugins installed-
-
- Please try with a new/clean qgis profile, no 3rd party plugins installed-
-
- Please try with a new/clean qgis profile, no 3rd party plugins installed-
-
- h2. User Feedback
Hello, QGIS crashes from time to time when I try to exit it via the Windows Exit Button.
I di... -
-
02:02 PM Bug report #21840 (Closed): Geopackage - wrong string length
- When I try to export string data from csv to geopackage "String" columns are converted to String(255) also if they co...
-
12:27 PM Bug report #21829 (Closed): Vertices remain highlighted on one feature after finish using Vertex ...
- I am closing this one, because none of the issues I am seeing in 3.4.6 on our Citrix server are reproducible in my lo...
2019-04-11
-
- Interesting... if this will not get traction I suggest you to raise the matter in the developers mailing list. Thanks!
-
11:24 PM Bug report #21839 (Closed): QgsDataSourceUri parameter checkPrimaryKeyUnicity is ignored for post...
- Initial loading time of large PostgreSQL views (> 10 million records) seems to have increased considerably compared t...
-
- I can't confirm with data of my own (but the same identical constraint), I'm using 3.6.1 on Ubuntu.
-
- I can't confirm with data of my own (but the same identical constraint), I'm using 3.6.1 on Ubuntu.
-
10:51 AM Bug report #21834: Split feature adds auto incremental number, no way to stop that
Here is a picture if the attribute table properties:
!http://files.offroad-bulgaria.com/sabin/map/images/qGIS_b...-
- Just to add that Add feature does not have such behavior, and is working correctly.
-
- I have a PostGIS layer with a field (named tr_link_id) with constrained:
CONSTRAINT tr_link_id_null_or_bigger_than_z... -
-
- Sebastian Brocks wrote:
> See the attached picture: "Pasted" contains the features I want to copy into "nullpunkt". ... -
09:15 AM Bug report #21809: when pasting features to postgresql layer, attributes that are a primary key d...
- See the attached picture: "Pasted" contains the features I want to copy into "nullpunkt". What you see in nullpunkt i...
-
- Yes they do
-
- Evgeniy Z wrote:
> Hello.
>
> First of all, QGIS 2 has no such problem! All fine.
>
> For QGis 3+ versions on ... -
- Hello.
First of all, QGIS 2 has no such problem! All fine.
For QGis 3+ versions on the same computers:
If ther... -
- QGIS (so also OGR I think) see it as
Geometry
Polygon (Polygon)
so it is expected it does not accept mult... -
11:52 AM Bug report #21820: after merging selected features, which appears successful; edits will not save...
- Sample uploaded - thanks
I have noted that it is TAB format that won't commit - this was the format of my source dat... -
-
- You may be right there. However, I think it will confuse a lot of people. I will see whether we can arrange a fix wit...
-
> I think this is a regression, because the feature vertex highlight lock was not available in 2.18
the digitizi...-
- I realised my steps need another amendment. Step 1 should say:
"1. Use the Vertex Editor tool to right-click and loc... -
10:03 PM Feature request #21838 (Open): Number of symbols per symbol category in Categorized Renderer View
- I'd like to see the number of symbols appear for each symbol catgory in the Symbology tab of the Layer properties.
-
- Confirmed here also on Linux, pretty severe regression.
-
- Confirmed here also on Linux, pretty severe regression.
-
- Confirmed here also on Linux, pretty severe regression.
-
- Confirmed here also on Linux, pretty severe regression.
-
- When the data CRS is different from project CRS the Topological Editing mode is not working. It is selecting only the...
-
-
10:13 AM Bug report #21822: Cannot load multivariable netcdf files
- I solved partially the problem.
I changed the name of dimensions from x to X, from y to Y, and from Years to Time a... -
- Gavin Fleming wrote:
> I haven't tried the Lutra installer yet.
if you can please try it. -
12:00 PM Bug report #21563: buggy profile results in two instances starting
- I haven't tried the Lutra installer yet.
I am talking about QGIS profile, not the OS profile. -
-
01:19 PM Bug report #21832: can't set virtual fields length
- Your right! It's only diferent from the previous versions! I think I see the previous out wiht NULL and I didn't go a...
-
- Chris Pierpoint wrote:
> Crashes on exit after working on project file created in v3.2. Does not appear to corrupt ... -
01:55 PM Bug report #21831: QGIS crashes on exit
- Crashes on exit after working on project file created in v3.2. Does not appear to corrupt data.
-
03:17 PM Bug report #21836: Copy/Paste fails in Postgis layer null value in column "gid" violates not-nul...
- "gid" column is here the primary key
QGIS 3.4.6 doesn't fix the issue
QGIS 3.6 fix it, can you bring the patch ... -
- When copy/past features from Shapefile layer to Postgis layer, an error occure "null value in column "gid" violates n...
-
- I don't understand: that's what modal dialogs do.
What is the expected behavior? -
- Have your Desktop Environment/Window Manager set up to not give focus to new windows
Run QGIS
Open the plugin m... -
11:27 AM Bug report #21824: value map widget saves description in stead of value to attribute table
- I think the *.dbf-file of a shapefile can be seen as its underlying database even though it's only one table. As for ...
-
- Robin Rotsaert wrote:
> Just checked. In the database the values are saved correct!
>
> So I guess I totally mis... -
- Robin Rotsaert wrote:
> Just checked. In the database the values are saved correct!
>
> So I guess I totally mis... -
- Just checked. In the database the values are saved correct!
So I guess I totally misunderstood the concept of thi... -
- Did you check what is actually saved into the database?
Because in the attribute table you won't see the actual va... -
- I checked again in a blank project and still have the same problem. See attached screenshot. I created a multi-polygo...
2019-04-10
-
- Brett Carlock wrote:
> Giovanni Manghi wrote:
> > my hunch is that it was never implemented, so this would be a fea... -
- Giovanni Manghi wrote:
> my hunch is that it was never implemented, so this would be a feature request. But I can be... -
> Yes, that would be correct. However, I've only just discovered/tried to use this as of yesterday under 3.6.1, so ...-
- Giovanni Manghi wrote:
> so it actually never worked as expected (maybe because it was never implemented in the firs... -
> Unless the context menu entries for copy/paste of Style Symbols are just place-holders, in which case I guess thi...-
- Giovanni Manghi wrote:
> is this is a bug or a feature request?
Bug, as filed.
Unless the context menu entries ... -
- is this is a bug or a feature request?
-
- Giovanni Manghi wrote:
> just tried with the postgresql datatype boolean, still works.
> But I can confirm that wit... -
- Giovanni Manghi wrote:
> just tried with the postgresql datatype boolean, still works.
> But I can confirm that wit... -
- Brett Carlock wrote:
> Giovanni Manghi wrote:
> > I can't confirm here.
> > I tested using a postGIS vector, with ... -
- Brett Carlock wrote:
> Giovanni Manghi wrote:
> > I can't confirm here.
> > I tested using a postGIS vector, with ... -
- Giovanni Manghi wrote:
> I can't confirm here.
> I tested using a postGIS vector, with a column of type varchar cal... -
- I can't confirm here.
I tested using a postGIS vector, with a column of type varchar called "affected" and some feat... -
- It does not seem to be a block anyway... or is it? Does it prevent you to fill a virtual text field with the result o...
-
- It does not seem to be a block anyway... or is it? Does it prevent you to fill a virtual text field with the result o...
-
- It does not seem to be a block anyway... or is it? Does it prevent you to fill a virtual text field with the result o...
-
- It does not seem to be a block anyway... or is it? Does it prevent you to fill a virtual text field with the result o...
-
- I'd like to report a bug when someone tries to create a virtual database field. Actually only works for whole number ...
-
- please try with a new/clean qgis profile.
-
- please try with a new/clean qgis profile.
-
- please try with a new/clean qgis profile.
-
- please try with a new/clean qgis profile.
-
- please try with a new/clean qgis profile.
-
07:30 PM Bug report #21831 (Feedback): QGIS crashes on exit
- Everytime that I click on exit button, the QGIS crashes. It does not show me the option "do you want to save, discard...
-
- I'd like to see the possibility to have the extent of spatial bookmarks be visible. This could help in the overview m...
-
07:14 PM Bug report #21783: Error reading netCDF with multiple bands
- Giovanni Manghi wrote:
> giu mas wrote:
> > Mmm... I disagree since it does not work on my OSGeolive VM (I can shar... -
- giu mas wrote:
> Mmm... I disagree since it does not work on my OSGeolive VM (I can share the VM with you).
I can... -
- Mmm... I disagree since it does not work on my OSGeolive VM (I can share the VM with you).
Furthermore, there are ... -
- Yeah I can see it on Windows... but on Linux definitely works here.
-
> I have a temporary scratch layer with a few point features with two attributes, one integer of length 10, and one...-
- Here's the sql for the table:
CREATE TABLE public.nullpunkt(
nummer integer NOT NULL,
bezeichnung varchar(1) N... -
- Can you please detail the precise steps to replicate (also the sql used to create the table and the PK with the a att...
-
-
06:47 PM Bug report #21815: Editing a GeoPackage feature with spaces in the field names can crash QGIS
- Yes, I went to Settings -> New Profile to create a new profile. I get the same crash under Windows and Mac OS with th...
-
- Matt Yoder wrote:
> I can reproduce the crash with a clean profile on both Windows and Mac OS. However, I noticed in... -
- I can reproduce the crash with a clean profile on both Windows and Mac OS. However, I noticed in my testing that not ...
-
- No crash here on 3.6.1 on linux.
Please also try a new/clean (qgis) profile, no 3rd party plugins installed. -
- No crash here on 3.6.1 on linux.
Please also try a new/clean (qgis) profile, no 3rd party plugins installed. -
- No crash here on 3.6.1 on linux.
Please also try a new/clean (qgis) profile, no 3rd party plugins installed. -
06:29 PM Bug report #21797: parameter type error in SAGA Gaussian Filter
- Unfortunately doing a Pull Request" is way above my knowledge level. I would greatly appreciate some competent perso...
-
- Garth Fletcher wrote:
> Proof of concept: editing /Applications/QGIS_3_6_1-1.app/Contents/Resources/python/plugins/p... -
- Garth Fletcher wrote:
> Proof of concept: editing /Applications/QGIS_3_6_1-1.app/Contents/Resources/python/plugins/p... -
- Garth Fletcher wrote:
> Proof of concept: editing /Applications/QGIS_3_6_1-1.app/Contents/Resources/python/plugins/p... -
- Interesting:
same exact command generated in both versions?
can you see any difference in running the command ... -
- Interesting:
same exact command generated in both versions?
can you see any difference in running the command ... -
- I tried to generate tiles for zoom levels 10-11 for a roughly 2GB compressed DOP, with QGIS 3.6.1 it took about 581 m...
-
- I believe that this is more general, so #21814 could be closed.
-
> I can't speak to any other database engine than geopackage, as that is all I use at current.
>
> However, it i...-
> I can't speak to any other database engine than geopackage, as that is all I use at current.
>
> However, it i...-
- Have you followed the instructions here? https://gitlab.orfeo-toolbox.org/orfeotoolbox/qgis-otb-plugin
-
- Have you followed the instructions here? https://gitlab.orfeo-toolbox.org/orfeotoolbox/qgis-otb-plugin
-
- Nikola Kranjčić wrote:
> I am trying some of the machine learning modules, for example, Artificial Neural Network. I... -
- Is a regression compared to... 2.18?
-
- Step 3 perhaps should say: "3. The Vertex Editor panel disappears, but the big red dots remain and will not disappear."
-
- The issue goes like this:
1. Use the Vertex Editor tool to highlight the vertices of one feature, so they are the ... -
- Duplicate of #20327 ?
-
- Duplicate of #20327 ?
-
> This is not an actual question but more of a rhetorical one at the end.
ok-
05:31 PM Bug report #21804: Qgshandlebadlayers Browse button not working
- Giovanni Manghi wrote:
> Isn't this a better fit for a question in the qgis developers mailing list?
Doubtfully, ... -
- Isn't this a better fit for a question in the qgis developers mailing list?
-
- Isn't this a better fit for a question in the qgis developers mailing list?
-
-
05:27 PM Bug report #21786: Processing toolbox "fix geometries" does not handle array fields
- Giovanni Manghi wrote:
> Is this a problem of the specific tool in the subject, or a general one of any tool in the ... -
-
- Hi, subject and description must be in English. Thanks for understanding.
Please try working with a new/clean (qgi... -
- Hi, subject and description must be in English. Thanks for understanding.
Please try working with a new/clean (qgi... -
- Hi, subject and description must be in English. Thanks for understanding.
Please try working with a new/clean (qgi... -
- Anita Graser wrote:
> Looks ok in 3.6 at least
thanks Anita, I put this ticket in feedback as a reminder for me t... -
- This should be raised in the developer mailing list (is not a bug in qgis code anyway).
-
- This should be raised in the developer mailing list (is not a bug in qgis code anyway).
-
- This should be raised in the developer mailing list (is not a bug in qgis code anyway).
-
- Please attach sample data.
-
- Please attach sample data.
-
- after digitising new polygons into an existing dataset i want to merge two to make a multipart polygon. This appears ...
-
- Also possibly duplicate of #21783
-
- Also possibly duplicate of #21783
-
- Also possibly duplicate of #21783
-
- Please attach sample data, thanks!
-
- An update:
when from my python script were I generate the netcdf I select a single variable from my mutivariable dat... -
- I upgraded QGis and I cannot load some netcdf anymore. All the file multivariable that I have cannot be read.
The n... -
-
12:55 PM Bug report #15471: Hide all column in attribute table: colmun can't be displayed back
- This is still an issue in 3.4.4. If you hide all the columns you can't right click a column header to bring up the "O...
-
- You sure? in the context of the *QGIS PROJECT* where the widget is set it always shows the description. You must chec...
-
- You sure? in the context of the *QGIS PROJECT* where the widget is set it always shows the description. You must chec...
-
- This was subject of an old bug report (#8818) , but I think it should be reopened. I'm working on Qgis 3.6.0 on Winds...
-
- I also think that this would be very useful.
-
- I also think that this would be very useful.
-
03:26 PM Feature request #21826 (Open): GML_ATTRIBUTES_TO_OGR_FIELDS=YES by default when loading GML
- We work in Europe for the Joint Research Centre (European Commission) as technical coordinator of the EU INSPIRE Dire...
-
-
03:44 PM Bug report #21827 (Closed): QGIS Crashed on exit
- Crash ID: f4475de87e6a815390b3363a83d3fb7ae10fc9c9
Stack Trace
proj_lpz_dist :
proj_lpz_dist :
proj_lpz_d... -
- Please try with:
a recent version of qgis 3.4 or 3.6
a new/clean qgis profile -
- Please try with:
a recent version of qgis 3.4 or 3.6
a new/clean qgis profile -
- Please try with:
a recent version of qgis 3.4 or 3.6
a new/clean qgis profile -
- I'm not sure what the "junction and and dot-object tools" are, can you detail?
also try with a new/clean qgis prof... -
- I'm not sure what the "junction and and dot-object tools" are, can you detail?
also try with a new/clean qgis prof... -
- I'm not sure what the "junction and and dot-object tools" are, can you detail?
also try with a new/clean qgis prof... -
- I'm not sure what the "junction and and dot-object tools" are, can you detail?
also try with a new/clean qgis prof... -
- I'm not sure what the "junction and and dot-object tools" are, can you detail?
also try with a new/clean qgis prof... -
- I'm not sure what the "junction and and dot-object tools" are, can you detail?
also try with a new/clean qgis prof... -
- I'm not sure what the "junction and and dot-object tools" are, can you detail?
also try with a new/clean qgis prof... -
03:49 PM Bug report #21828 (Open): Crash on switching back and forth between junction and and dot-object tool
- QGis crashed and printed this report, when I was switching back and forth between junction and and dot-object tool.
... -
- when setting up drive down cascades with the value relation widget things get quite complicated when one wants to set...
-
-
- Have you tried turning your computer off and on again? Have you tried reinstalling QGIS?
-
- How fix this problem?...
-
- I'm also in favor for this idea. This would make for smarter, more dynamic forms.
-
- I'm also looking forward to this option.
-
- Applied in changeset commit:qgis|e174577a6adacb920bb668da9d24281b308cd17c.
-
- Applied in changeset commit:qgis|e174577a6adacb920bb668da9d24281b308cd17c.
-
01:11 PM Bug report #21823 (Closed): Problem with token-secured WFS service from ArcGIS Server
- When I try to add a token-secured WFS service from ArcGIS Server I get this error message:
Layer ist ungültig: De... -
- when using the value relation widget in the form of a layer within a geopackage and when saving these settings as def...
-
10:22 AM Bug report #21818 (Open): Shortcut does not work when dock attribute table
- When attribute table is on the same windows as the main map (using dock attribute table), the shortcut ctrl+J is not ...
-
- It would be nice to zoom on a feature when double clicking on the row number on the left of the attribute table. I kn...
-
2019-04-09
-
11:43 PM Bug report #21816 (Closed): Security issues in QT5
- Hi
not sure if this affects QGIS or not but I figured you need to be aware of this issue if you are not already.
... -
09:33 PM Bug report #21613: WMTS GetTile and/or WMS GetMap request flips x and y coordinates
- Hi, I've installed and tested 2.18.28 - it doesn't work. Trying to get @IP/qgisserver?SERVICE=WMTS&REQUEST=GetCapabil...
-
08:43 PM Bug report #20739: Qgis3 imports DATE type colum in oracle Database as QDate, losing hh:mm:ss
- Hi, I have the same problem.
This is a big issue because is not possible save editing, because this cause QGIS cras... -
- 2.4.0 on Windows
!osgeo4w64_qgis_about.png! -
- 2.4.0 on Windows
!osgeo4w64_qgis_about.png! -
- 2.2.3 on Ubuntu
!osgeolive12_qgis_about.png!
-
> Unfortunately, I got the same error (attached).
what is the GDAL version used (you see it in the QGIS "about")?-
- My Ubuntu 18.04 steps:
- Download the latest OSGeoLive (12) VM.
- Update the software repositories with https://q... -
- My Ubuntu 18.04 steps:
- Download the latest OSGeoLive (12) VM.
- Update the software repositories with https://q... -
- giu mas wrote:
> I have attempted the same process (d&d the 3 band raster) on different Windows machines.
I trie... -
- giu mas wrote:
> I have attempted the same process (d&d the 3 band raster) on different Windows machines.
I trie... -
- I have attempted the same process (d&d the 3 band raster) on different Windows machines.
The result is always the... -
- I have attempted the same process (d&d the 3 band raster) on different Windows machines.
The result is always the... -
- Can confirm here with the supplied data.
-
- Steps to reproduce:
# Add the attached GeoPackage layer to the map.
# Toggle editing.
# Use the Vertex Tool to m... -
- Giovanni Manghi wrote:
> This is not limited to GPKGs: for instance load a PostGIS table, then add a column from a d... -
- This is not limited to GPKGs: for instance load a PostGIS table, then add a column from a different backend other tha...
-
- STR:
Have a layer stored in a geopackage with N number of fields (5, for example).
Overwrite this same layer in t... -
- Why tagged as a regression? Did it worked as expected in any qgis release < 3.4.6?
-
- Why tagged as a regression? Did it worked as expected in any qgis release < 3.4.6?
-
- I've encountered a strange and serious problem with the QGIS WFS driver
Setup :
* QGIS 3.4.6 (Latest LTR and earl... -
- Harrissou Santanna wrote:
> @Giovanni, is this related to/same as #19099?
possibly but not completely sure. -
- Sorry, this must really be filed in English.
-
03:23 PM Feature request #21810 (Feedback): Feldrechner
- Im Feldrechner kann unter dem Punkt Ausgabefeldtyp Dezimalzahl (real) die Ausgabefeldlänge und die Genauigkeit nicht ...
-
- Is a 3rd party plugin, you must report the problem to the plugins Authors.
-
- Is a 3rd party plugin, you must report the problem to the plugins Authors.
-
04:02 PM Bug report #21811 (Closed): CrayFish plugin crash Qgis 3.4.6 Madeira
- h2. User Feedback
Load CrayFish plugin 3.0.0 and qgis crashed allways
h2. Report Details
*Crash ID*: db47721... -
04:25 PM Bug report #21813 (Open): Typo in Exporting Atlas Progress Window
- In QGIS 3.6.0, when we export an Atlas, the progress window which appears reads as *Expoering Maps* instead of the co...
-
- STR:
Copy symbol of one category
Select another category on the same layer, in the same Layer Symbology tab, withou... -
- Related #21313
-
- I think this would best be a comment on #13203
-
- I'm trying to paste a few features into a postgresql layer that has two attributes that together form the table's pri...
-
- Looks ok in 3.6 at least
-
09:41 AM Bug report #21227 (Closed): Geopackage layer rename in DB Manager does not update f_table_name va...
- Applied in changeset commit:qgis|9eca4059b8d09aab9eac5995f899a9bd07cd0083.
-
- My mean was QGIS CAN NOT Load normally
-
- Today I opened my QGIS 3.4 but when I closed I couldn't open again!
QGIS did try load component but
suddenly with... -
- Alexis Roy-L wrote:
> This is not a bug this is normal. My feature in review will solve this, if used properly.
>
... -
- Alexis Roy-L wrote:
> This is not quite a bug since the number of feature counted will not change since the original...
2019-04-08
-
11:12 PM Bug report #21806 (Feedback): qgis crashes after panning the map canvas
- h2. User Feedback
Wait refresh after pan. Presenti una manciata di vettori e un raster ecw (da CTR F.V.G.)
h2. ... -
10:50 PM Bug report #21502: "data defined size legend" do not uses the "size from/to" parameter and always...
- @Giovanni, is this related to/same as #19099?
-
- STR:
Have a layer with features representing a boolean-representable state, here: AFFECTED (impact assessment).
A... -
- Hi there,
I don't get why but the browse button always stays greyed out even when I change my layer selection.
... -
- Proof of concept: editing /Applications/QGIS_3_6_1-1.app/Contents/Resources/python/plugins/processing/algs/saga/descr...
-
- SAGA Gaussian Filter parameter window only accepts type Integer for "Standard Deviation" field, but should accept typ...
-
- This is not a bug this is normal. My feature in review will solve this, if used properly.
The feature count is the... -
- If I take a layer that has 458 features intially, symbolized using Categorized renderer by CompleteStreetName (so eac...
-
- This is not quite a bug since the number of feature counted will not change since the original feature has technicall...
-
- STR:
Have layer in geopackage with Number of Features X (1253, for example).
Replace layer in geopackage with ano... -
- Hi all, I got the below error while trying to instal the OTB, can anybody help me to fix this ? Please explain in a n...
-
- STR:
Have layer in geopackage with Number of Features X (1253, for example), with a given geometric extent.
Repla... -
07:24 PM Bug report #21779: Export to DXF does not handle multisurface geometries
- Since my previous posting, I have tried local datasets (geopackage) in addition to ArcGIS FeatureServer layers. I hav...
-
- Giovanni Manghi wrote:
> can you post any url we can use for tests?
An example layer is:
https://gis.fultoncount... -
- When a project contains hundreds of layers, the Layer Order Panel becomes awkward to navigate. Moving a layer can in...
-
- When a project contains many layers, e.g., 300+, and the Layer Order panel is being used to drag a layer to a differe...
-
- It'd be great to have the ability to change/enable/disable the various behaviors/features of Text Layers after they'v...
-
- 1) Ability to load/save copy/paste Query items from other layers, projects, and the filesystem. This can be HUGE, esp...
-
- I'd like to see joins/relates made a bit more robust and easy to work on by borrowing some UI/UX concepts from other ...
-
04:21 PM Bug report #21793 (Open): DXF-Export
- If i export any point-layer to DXF, the point are 3 to 5 times bigger in the DXF-Viewer then in QGIS. I tried to chan...
-
04:02 PM Bug report #21792 (Feedback): Crash when creating mapset
- h2. User Feedback
EN: When I create a new mapset, qgis returns this error window.
PT: Quando vou criar um novo ma... -
03:49 PM Feature request #21791 (Open): Allow indenting of sub-items in a legend
- There are various spacing controls for legends in the Print Composer, but none of them seem to let you indent the sub...
-
- Nathan Perry wrote:
> I see—so, perhaps a drop-down alternative to "Zoom to Layer" or a contextual click from the le... -
01:37 PM Bug report #21746: SAGA OpenCV Image Analysis
- I am trying some of the machine learning modules, for example, Artificial Neural Network. I am attaching one satellit...
-
- Nikola Kranjčić wrote:
> When trying to perform image classication there is always an error regarding use of right l... -
-
12:30 PM Bug report #21790 (Closed): QGIS 3.4.4 crashes on Save when more than one copy running
- h2. User Feedback
Saving project whilst another copy of QGIS is open with another project. Seems that having more ... -
12:31 PM Bug report #21741: "Check geometries" tool does not fixes errors (overlaps)
- Giovanni Manghi wrote:
> I cannot replicate the crash here on 3.6.1. I can replicate that the tool does not fixes th... -
12:13 PM Bug report #21789 (Feedback): Can't define a RASTER_LAYER input parameter type when defining a ne...
- as from https://github.com/qgis/QGIS-Documentation/blob/c1c228eb8a3ab4c5f72ef10f323070f64dd23056/source/docs/user_man...
-
11:40 AM Bug report #21788: Copy/Paste fails from one layer to another when layer has NOT NULL constraints...
- Expected behaviour would be:
- the attribute form would open
- In the form the user would see which values would ... -
- In a QGIS project with the following properties:
- Automatically create transaction groups where possible is enabled... -
- it works as expected here: when you d&d the 3 band raster on the canvas a dialog shows asking what band you want to l...
-
- Can you attach the problematic layer? thanks.
-
- Is this a problem of the specific tool in the subject, or a general one of any tool in the Processing toolbox?
-
- So I just did "fix geometries" on my PostGiS layer that has array fields, when I deleted the shapes from it and copie...
-
- The icon is to delete selected features, not nodes. To delete selected nodes use the "del" key.
-
- The icon is to delete selected features, not nodes. To delete selected nodes use the "del" key.
-
- The icon is to delete selected features, not nodes. To delete selected nodes use the "del" key.
-
- Alvin Laurio wrote:
> Giovanni Manghi wrote:
> > Giovanni Manghi wrote:
> > > > @Giovanni, Thank you for desire to... -
07:26 AM Bug report #21661: Luzon 1911 /UTM Zone 50,51 and 52N and PRS92 / UTM Zone 50,51and 52N projecti...
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > > @Giovanni, Thank you for desire to help in making these CRS i... -
> For an unknown reason, these red dots disappeared when I start my PC this morning...
>
> If someone get this p...-
> For an unknown reason, these red dots disappeared when I start my PC this morning...
>
> If someone get this p...-
09:49 AM Bug report #21743: Vertices symbols stay displayed after editing a polyline, and stay displayed e...
- Romain P wrote:
> Giovanni Manghi wrote:
> > A visual glitch that I have seen it happen from time to time, just res... -
-
- I just tested the same project in 2.18, and the Add Legend tool worked fine rendering the legend with all the layers ...
-
-
10:01 AM Bug report #16317 (Reopened): Adding the same short_name option on multiple layers is possible
- Still possible in 3.4 and master
-
- If the URL is already in a <a /> element, the replace of the clickable URL should not happen (e.g. in HTML GetFeature...
-
- It should open a browser and display the URL.
-
- It would be good if QGIS as a WMS client would automatically generate clickable URLs for text/varchar fields that con...
-
- Cannot reproduce anymore
-
07:47 AM Bug report #21422 (Closed): Snapping on Linestring Z intersections does not work anymore
- Applied in changeset commit:qgis|155e0eb5078cf0f113ac1dc69e7b40a063ff38ac.
-
- Applied in changeset commit:qgis|155e0eb5078cf0f113ac1dc69e7b40a063ff38ac.
2019-04-07
-
- Giovanni Manghi wrote:
> > As I said: "It shows up even when all layers show no errors when checked with the tools i... -
- When you have a feature selected in the vertex tool and you click and drag the mouse cursor to select some of the ver...
-
10:58 PM Bug report #21784 (Closed): @snapping_results gives no 'result' when adding feature to point layer
- Tried to use the code snippet explained in the qgis user guide as default value:
@with_variable( 'first_snapped_poin... -
- When trying to perform image classication there is always an error regarding use of right library (openCV functions)....
-
- I am creating some netCDF files with more than 1 band using GDAL (2.4.1).
The created files (an example file in at... -
- Giovanni Manghi wrote:
> ptrace: Operation not permitted.
See "creating a backtrace":https://qgis.org/en/site/get... -
- Confirmed also on Linux:
QGIS died on signal 11Could not attach to process. If your uid matches the uid of the ta... -
- Confirmed also on Linux:
QGIS died on signal 11Could not attach to process. If your uid matches the uid of the ta... -
- Giovanni Manghi wrote:
> No problem whatsoever here (see attached image), you probably need to look for a local issu... -
- No problem whatsoever here (see attached image), you probably need to look for a local issue. Try with a new/clean qg...
-
- Giovanni Manghi wrote:
> > please download from below link:
> >
> > http://s8.picofile.com/file/8356672842/zigmam... -
- Giovanni Manghi wrote:
> A visual glitch that I have seen it happen from time to time, just restart QGIS...
Thing... -
01:02 PM Bug report #21713: unvisible mouse cursor on specific backgrounds
- Giovanni Manghi wrote:
> Jan Lippmann wrote:
> > A financing of the bugfix is possible. Please contact me.
>
> i... -
-
03:53 AM Bug report #21781: QGis 3.6.0 crash when start on Linux OpenSuse Tumbleweed
- Jürgen Fischer wrote:
> christian faure wrote:
> > Jürgen Fischer wrote:
> > > … Might be a packaging issue - can ... -
10:34 AM Bug report #20536: Redrawing raster layer after file changed in QGIS?
- This is still an issue in 3.6.1. Makes georeferencing of raster images a PITA if you have to add a new layer and chan...
-
- Applied in changeset commit:qgis|2826ba34f9c2a65a419e908d981a7c90447417bc.
-
- Applied in changeset commit:qgis|2826ba34f9c2a65a419e908d981a7c90447417bc.
-
- Applied in changeset commit:qgis|59dd85103ddbfc640662c9ed220235d94cb7c7c2.
-
- Applied in changeset commit:qgis|59dd85103ddbfc640662c9ed220235d94cb7c7c2.
2019-04-06
-
11:27 PM Bug report #21775: qgis crash when filtering a layer with an attachment field
- In the attached archive, project, gpkg-file,
and a small video clip.
Thanks -
- Sergii Brazhynenko wrote:
> to repeat the crash:
> 1) Have a layer of any geometry with such characteristics for at... -
- to repeat the crash:
1) Have a layer of any geometry with such characteristics for at least one field:
- widg... -
- what are the exact steps to replicate?
-
- duplicate/related to #19118 ?
-
- duplicate/related to #19118 ?
-
- duplicate/related to #19118 ?
-
- duplicate/related to #19118 ?
-
> please download from below link:
>
> http://s8.picofile.com/file/8356672842/zigmamap.7z.html
>
> pass:Z!gM@...-
- Giovanni Manghi wrote:
> > I uploaded whole my pg_dump folder in zip file, please check it, if you see it is not eno... -
> I uploaded whole my pg_dump folder in zip file, please check it, if you see it is not enough or correct pleae let...-
- Giovanni Manghi wrote:
> You sure you imported the data in PostGIS with the correct CRS?
>
> Can you attach a pos... -
- Giovanni Manghi wrote:
> You sure you imported the data in PostGIS with the correct CRS?
>
> Can you attach a pos... -
- Giovanni Manghi wrote:
> You sure you imported the data in PostGIS with the correct CRS?
>
> Can you attach a pos... -
- You sure you imported the data in PostGIS with the correct CRS?
Can you attach a postgresql dump of your data? -
- You sure you imported the data in PostGIS with the correct CRS?
Can you attach a postgresql dump of your data? -
04:48 PM Feature request #21767: Zoom to feature(s)
- I see—so, perhaps a drop-down alternative to "Zoom to Layer" or a contextual click from the legend item. Essentially,...
-
- Nathan Perry wrote:
> That feature already exists—select any feature(s) and choose Zoom to Selection (see screen sho... -
- christian faure wrote:
> Jürgen Fischer wrote:
> > … Might be a packaging issue - can you file it there?
…
> For ... -
- Jürgen Fischer wrote:
> Looks like it crashes in PROJ called from GDAL called from QGIS. PROJ and GDAL were appare... -
- Looks like it crashes in PROJ called from GDAL called from QGIS. PROJ and GDAL were apparently rebuilt in the last ...
-
- Looks like it crashes in PROJ called from GDAL called from QGIS. PROJ and GDAL were apparently rebuilt in the last ...
-
- QGis 3.6.0 installed from repo https://download.opensuse.org/repositories/Application:/Geo
is crashing after display... -
- Nikola Kranjčić wrote:
> During SAGA Image analysis all of modules based on OpenCV don't work with the same output -... -
- Jan Lippmann wrote:
> A financing of the bugfix is possible. Please contact me.
if is you that is available to su... -
- A financing of the bugfix is possible. Please contact me.
-
- can you post any url we can use for tests?
-
- can you post any url we can use for tests?
-
- can you post any url we can use for tests?
-
- can you post any url we can use for tests?
-
- can you post any url we can use for tests?
-
- Tony Walters wrote:
> Any other suggestions on how I can assist debugging this?
linking (even privately if cont... -
- I cannot replicate on 3.6.1 on Linux (using ã, ç, etc.).
-
- I cannot replicate on 3.6.1 on Linux (using ã, ç, etc.).
-
11:56 AM Bug report #21782: QGIS macOS plug-ins error install
- Giovanni Manghi wrote:
> You must install them by your own (as on Linux): https://www.kyngchaos.com/software/python/... -
- You must install them by your own (as on Linux): https://www.kyngchaos.com/software/python/
-
- You must install them by your own (as on Linux): https://www.kyngchaos.com/software/python/
-
- You must install them by your own (as on Linux): https://www.kyngchaos.com/software/python/
-
- Can't install multiple types of plug-in due to missing libraries (i.e. numpy, scipy, and matplotlib)
These libraries... -
- I cannot replicate the crash here on 3.6.1. I can replicate that the tool does not fixes the overlaps (I think they a...
-
- I cannot replicate the crash here on 3.6.1. I can replicate that the tool does not fixes the overlaps (I think they a...
-
- I cannot replicate the crash here on 3.6.1. I can replicate that the tool does not fixes the overlaps (I think they a...
-
- A visual glitch that I have seen it happen from time to time, just restart QGIS...
-
- A visual glitch that I have seen it happen from time to time, just restart QGIS...
-
- A visual glitch that I have seen it happen from time to time, just restart QGIS...
-
- Just tried here on a random polygon shapefile and geom_to_wkt($geometry) worked as expected (aggregation two polygons...
-
- Steve Lowman wrote:
> Hi. Sorry, I can't do that. Our project has far too many layers, and many of them are subject ... -
-
- Hello Aanu Busari
Your report contains too few details....
With which steps occur this issue/crash?
Can you t... -
-
2019-04-05
-
10:45 PM Bug report #21780 (Closed): QGIS Crashed!
- Crash ID: 60c0093ac9d5b8f56929417062eebec43d94ece2
Stack Trace
QWidget::actions :
QMenu::clear :
QgisApp:... -
- Up until earlier this week, I could use the [Project][Export DXF] command to export a .dxf file containing data from ...
-
08:36 PM Feature request #21778: Activate as predefined, the "preview" tab in the properties of the vector...
- QGIS 3.4.6 / 3.6.1, Windows 10 64 bit
-
- When I activate the properties of the vector layers, in the resource navigator panel, 3 tabs appear:
Metadata, previ... -
- You need to install pyqtgraph - see "plugin page":https://plugins.qgis.org/plugins/timeseriesviewerplugin/
-
- You need to install pyqtgraph - see "plugin page":https://plugins.qgis.org/plugins/timeseriesviewerplugin/
-
- You need to install pyqtgraph - see "plugin page":https://plugins.qgis.org/plugins/timeseriesviewerplugin/
-
- You need to install pyqtgraph - see "plugin page":https://plugins.qgis.org/plugins/timeseriesviewerplugin/
-
06:45 PM Bug report #21777 (Closed): EO Time Series Viewer plugin fails to install
- Below is the text from the plugin error popup during installation of the 'EO Time Series Viewer' in the plugin manage...
-
- That feature already exists—select any feature(s) and choose Zoom to Selection (see screen shot).
-
04:37 PM Bug report #21776 (Open): rendering cycles forever when viewing raster at certain scales
- The project where this behaviour occurs is very large - many GB. I created a small project with one of the LiDAR rast...
-
- Can you share share a test project and data to reproduce this issue?
-
- When viewing high resolution LiDAR rasters, the canvas renders continuously and the LiDAR segments flash on and off ...
-
- I also just tested using Cesar's project and layers. The legend loading and other performance timings were okay with ...
-
- Hi. Sorry, I can't do that. Our project has far too many layers, and many of them are subject to copyrights.
-
- *qgis crash when filtering a layer with an attachment field*
Crash ID: f40bf397c5155333687146b59354eebf255adf... -
-
- Applied in changeset commit:qgis|9a689aff555a5b5ae0a28e4dee452ab1ce95de25.
-
- Applied in changeset commit:qgis|9a689aff555a5b5ae0a28e4dee452ab1ce95de25.
2019-04-04
-
- Applied in changeset commit:qgis|eabf56bfb3cbaf859adebe059f62bffc112fe481.
-
- Applied in changeset commit:qgis|eabf56bfb3cbaf859adebe059f62bffc112fe481.
-
11:19 PM Bug report #21774 (Closed): qgis master codeversion 037a8283fa start with python error
- !qgis3.7_codeversion037a8283fa_start_python_error.jpg!
-
10:05 PM Bug report #21748: Categorized style do not works with NULL value
- Giovanni Manghi wrote:
> This was tagged a regression because worked well in some version < 3.4?
2.18 -
- This was tagged a regression because worked well in some version < 3.4?
-
- This was tagged a regression because worked well in some version < 3.4?
-
- There is also a problem in count (not rendering) with "style with rules" when you try to do a double classification u...
-
- Sorry it defaulted to him for some reason I didn't notice, well I am not entirely sure it's the plugin, that shouldn'...
-
- Zachary King wrote:
> So far not that I have seen, but I just updated today and this was the first task I tried, oth... -
- Zachary King wrote:
> So far not that I have seen, but I just updated today and this was the first task I tried, oth... -
- Zachary King wrote:
> So far not that I have seen, but I just updated today and this was the first task I tried, oth... -
- So far not that I have seen, but I just updated today and this was the first task I tried, other maps such as Google ...
-
- Zachary King wrote:
> Crash ID: b6cb926aa0ff26b4079f6c611a06463f37627bb4
does it crash if you don't use that map ... -
- Zachary King wrote:
> Crash ID: b6cb926aa0ff26b4079f6c611a06463f37627bb4
does it crash if you don't use that map ... -
- Zachary King wrote:
> Crash ID: b6cb926aa0ff26b4079f6c611a06463f37627bb4
does it crash if you don't use that map ... -
- Zachary King wrote:
> Crash ID: b6cb926aa0ff26b4079f6c611a06463f37627bb4
does it crash if you don't use that map ... -
- Crash ID: b6cb926aa0ff26b4079f6c611a06463f37627bb4
Stack Trace
QObject::thread :
QgsNetworkAccessManager::... -
- Zachary King wrote:
> The issue is that when Open Sea Maps - Seamarks doesn't load in QGIS 3.6.1 the program crashes... -
- The issue is that when Open Sea Maps - Seamarks doesn't load in QGIS 3.6.1 the program crashes, I have written the Gi...
-
- I'm afraid it's not related to the plugin manager at all.
I guess you load the OpenSeaMap using a plugin (probably... -
- I'm afraid it's not related to the plugin manager at all.
I guess you load the OpenSeaMap using a plugin (probably... -
- Hi I was trying to open the web map Open Sea Maps seamarks and every time I try it cause qgis 3.6.1 to crash :/
-
08:55 PM Feature request #21773 (Open): Deselect Table After Add
- When adding PostgreSQL data in Data Source Manager after pressing the add button QGIS should deselect previously sele...
-
- Steve Lowman wrote:
> I tested using the current versions (not master) of 3.6.1 and 3.4.6. I tried installing the ni... -
- I tested using the current versions (not master) of 3.6.1 and 3.4.6. I tried installing the nightly master of 3.4.6, ...
-
- I add my ESRI shapefile layers via "Add PostGIS Layers" but when they add completely I tried zoom in and zoom out
on... -
- Applied in changeset commit:qgis|f1dbcc3c53c8bc612bb29c60f75b6f403f3f65cc.
-
- Applied in changeset commit:qgis|f1dbcc3c53c8bc612bb29c60f75b6f403f3f65cc.
-
04:09 PM Bug report #21751: r.quantile doesn't work when called from qgis
- I confirm this issue.
The parameter *html* in
https://github.com/qgis/QGIS/blob/580e7eb6ba4e7a88a6d470f2907350... -
- I can report that in our Citrix QGIS 3.4.6 application, this is now fixed, but there is still a lesser bug where the ...
-
-
-
- a too aggressive AV(?).
-
- a too aggressive AV(?).
-
- a too aggressive AV(?).
-
- Please try o a new/clean qgis profile.
Please also add the *exact* steps to follow to replicate and possibly attac... -
- Please try o a new/clean qgis profile.
Please also add the *exact* steps to follow to replicate and possibly attac... -
- Please try o a new/clean qgis profile.
Please also add the *exact* steps to follow to replicate and possibly attac... -
08:46 AM Bug report #21770 (Feedback): "Python support will be disabled" if using non-ascii characters
- When starting qgis 3.6.1 on windows 10 after booting, I am met with
Couldn't load qgis.user.
Python support will ... -
- Applied in changeset commit:qgis|037a8283fa4b88fc2559ce1b54782bc52ad7abfc.
-
- Applied in changeset commit:qgis|037a8283fa4b88fc2559ce1b54782bc52ad7abfc.
-
05:17 AM Bug report #21769 (Closed): Crash when Searching within Layer Properties
- QGIS is crashing upon submitting a search within Layer Properties. Using version 3.6 Noosa. See attached images...
-
03:39 AM Bug report #21768: WFS GetFeature fails on TypeNames parameter
- I can confirm this is an issue with 3.6.1-Noosa also
-
When using the WFS 2.0.0 Compliant "typeNames" with GetFeatures qgis3 fails to retrieve the WFS data. However TypeN...
2019-04-03
-
- I'd love to be able to zoom to the extent of a feature within a layer.
For instance, zoom to the extent of the roa... -
- Setting/using Map themes is pretty sweet, but I'd like to be able to expose them via variables to things like the Map...
-
- I'd like to see Page Navigation controls for the Map Composer when there are multiple pages.
Something inspired by... -
- Currently, we can keep track of and display number of pages (yay!).
However, we can't currently assign/alias a pag... -
- I'd like to see a metadata field for Area of Interest, Location, Subject, or something similar. This could be easily ...
-
- It is not possible to set arbitrary dimensions for the attribute table object directly.
However, this can almost b... -
- I'd like to see this panel have both automated entries (user-initiated saves) as well as the current manual notes tha...
-
- *Project saved variables*
Project saved by... (username)
* do not include autosaves
Project saved on... (datetime)... -
08:25 PM Feature request #21759 (Open): Changing rendering behavior on zoom to prevent flashes
- On macOS with qgis 3.4.6 LTR. Unknown if this is on other systems
Zooming should disable rendering until the updat... -
- As above, when an item is rotated -90deg or 270deg it no longer is a canditate for snapping.
Any non-zero value fo... -
- I'd like to be able to rotate text independent of the Label object (bounding box).
-
- The Label margin properties work by not only moving the text, but also clipping/obstructing the text potentially.
... -
- It'd be really helpful if we could group map composer elements, possibly locking the entire group. An Alias for the g...
-
- It'd be really helpful to have the Measure tool in the Map Composer so that we can verify size, area, alignment, etc ...
-
- I have a layout that needs to be ANSI D, and it is defined as such for the page properties.
I am trying to set eve... -
05:47 PM Bug report #21752 (Closed): qgis-ltr-bin.exe is eliminated by antivirus
- Recently, my Kaspersky antivirus software has been deleting the QGIS long term release executable due to a trojan thr...
-
05:46 PM Bug report #21751 (Closed): r.quantile doesn't work when called from qgis
- The grass arguments constructed by qgis have an error, so quantiles are not calculated. This applies to all versions...
-
-
- Please try with a new/clean qgis profile.
-
- Please try with a new/clean qgis profile.
-
- Please try with a new/clean qgis profile.
-
- Please try with a new/clean qgis profile.
-
- Please try with a new/clean qgis profile.
-
04:41 PM Bug report #21750 (Closed): crash on exit
- Qgis NOOSA is very slow and crash systematically on exit.
Crash ID: 62f1fcd2045780cb9f127836e6b579b8665f3e63
... -
- it would be nice to be able to create
convex hull by class (with a field)
as for concave hull (k-nearest neighbor) -
- It works correctly for "varchar" fields not for "numeric" fields
-
- Using categorized style the NULL value are not correctly classified as else.
Using rule they are correctly classi... -
03:04 PM Bug report #21747 (Feedback): QGIS crashed
- Crash ID: 7620c452094cd746a8d82c37da2f9e0b2e16ad92
Stack Trace
QGraphicsItem::pos :
QgsMapToolRotateFeature::c... -
- During SAGA Image analysis all of modules based on OpenCV don't work with the same output - Error select a library. I...
-
12:41 PM Bug report #21745 (Closed): PostgreSQL identity column not recognized properly
- Having the following table definition:...
-
-
11:37 AM Bug report #17299 (Reopened): Histogram for graduated style in layer properties disappears when t...
- As commented earlier, the issue persists in 3.4 (even if there has been a slight improvement).
The minimum height of... -
- I've tried another time and this time qgis gives mi the error (that I leave attached).
-
- Hi all!
I've some problems with the native plugin CHECK GEOMETRIES.
1 set the options for the geometry checking (I ... -
- I can reproduce this in 3.6.
1. Have no panel on the right.
1. Add Layer Styling Panel, then Processing. Proces... -
- Choosing an SVG which is not in the standard QGIS path the style (QML but also PostGIS) is saved with the absolute pa...
-
- As usual on Qgis 2.18, I moved polyline nodes to reshape it. When I clicked on the crayon to finish and save modifica...
-
-
09:46 AM Bug report #21733: QGIS 3.4.6 startup crash on Ubuntu 18.04 LTS
- Resolved...Please close call. Many Thanks
-
10:49 AM Bug report #21742 (Open): Bbox of layer groups in WMS with empty layers
- Following #5520, when a group contains a layer that is empty, the bbox of the empty layer is either the one declared ...
-
02:36 AM Bug report #4863: Should hidden layers be editable/selectable?
- Being able to edit hidden layers is very useful when working with remote sensing data. Specifically, being able to s...
2019-04-02
-
01:11 AM Bug report #21740 (Feedback): Aggregate processing tool - Group by expression ($geometry) doesn't...
- As the title states, when attempting to aggregate by geometry the results are inconclusive.
I tested the following... -
- Currently, we can import a spreadsheet (spatial or non-spatial) with ease. Good stuff.
However, the import is quit... -
- Giovanni Manghi wrote:
> have you tried the v.clean tools in the processing toolbox, also by enabling the parameter ... -
- Applied in changeset commit:qgis|2ef99da242feb4013a8abe4ebb543b0f1b3b11f2.
-
- Applied in changeset commit:qgis|2ef99da242feb4013a8abe4ebb543b0f1b3b11f2.
-
- When hovering on a gpkg layer with a filter of the following, QGIS will hard-crash every time when attempting to draw...
-
- Fixed in master.
Backport is pending for lack of time. -
- Fixed in master.
Backport is pending for lack of time. -
- I moved some layers from my desktop to my data folder, and when I opened QGIS it predictably asked me to repair the l...
-
- Andreas Neumann wrote:
> I am happy to upgrade our server one day (not immediately) - but I guess that I am not the ... -
- Applied in changeset commit:qgis|95bd7480d0f0b65359e23bee5454e066fb712cab.
-
- Applied in changeset commit:qgis|95bd7480d0f0b65359e23bee5454e066fb712cab.
-
03:41 PM Bug report #21730: QGIS crashes on "Open project"
- Jürgen Fischer wrote:
> Jürgen Fischer wrote:
> > Please check for tickets with a similar backtrace (eg. #18260). ... -
- Jürgen Fischer wrote:
> Please check for tickets with a similar backtrace (eg. #18260). Try starting QGIS with @--h... -
- Please check for tickets with a similar backtrace (eg. #18260). Try starting QGIS with @--hide-browser@ - I might ha...
-
> No luck with that. Have also uninstalled and removed all program files, redownloaded launcher and reinstalled
...-
- Giovanni Manghi wrote:
> > Sorry, I am not sure what you mean by that.
>
> delete the folder
>
> C:\Users\you... -
> Sorry, I am not sure what you mean by that.
delete the folder
C:\Users\yourusename\AppData\Roaming\QGIS
...-
- Giovanni Manghi wrote:
> Alistair Branagh wrote:
> > Giovanni Manghi wrote:
> > > Can you attach/link the project ... -
- Alistair Branagh wrote:
> Giovanni Manghi wrote:
> > Can you attach/link the project (with the data of course)?
> ... -
- Giovanni Manghi wrote:
> Can you attach/link the project (with the data of course)?
It's not project specific, as... -
- Can you attach/link the project (with the data of course)?
-
- Can you attach/link the project (with the data of course)?
-
- Can you attach/link the project (with the data of course)?
-
- Can you attach/link the project (with the data of course)?
-
- When I try to open a project the application crashes. It happens every time. I have been trying to move up to v3 from...
-
- hong chen wrote:
> Giovanni Manghi wrote:
> > unsure from the description where the issue is or what is.
>
> if ... -
02:47 PM Bug report #21736: the options window close on enter key
- Giovanni Manghi wrote:
> unsure from the description where the issue is or what is.
if i type keyword in the opti... -
- unsure from the description where the issue is or what is.
-
- while open the option window, type any string in search textbox then click enter, the options windows will going to c...
-
- When doing a GetFeatureInfo request on the service
https://services.geo.zg.ch/ows/Gebaeudebrueter
and choosing ... -
- look the attechment picture, the objects select color and map backgroud color setting does not effact the mapcontrol.
-
- Giovanni Manghi wrote:
> No more problems, with the provided dataset, here now on 3.6.1 on linux.
spoke too soon:... -
- No more problems, with the provided dataset, here now on 3.6.1 on linux.
-
09:22 AM Bug report #21619: Check geometries crashing QGIS 3.6
- Fresh installation (3.6.1) but no way out (ok in 3.2). Check geometry plugin (with quite big dataset) makes QGis cras...
-
- Sekedoua Kouadio wrote:
> Qgis is open but something still rning/charging...
can you please be a little more spec... -
- Sekedoua Kouadio wrote:
> Qgis is open but something still rning/charging...
can you please be a little more spec... -
- Sekedoua Kouadio wrote:
> Qgis is open but something still rning/charging...
can you please be a little more spec... -
08:23 AM Bug report #21728 (Feedback): QGIS crashed
- Qgis is open but something still rning/charging...
Crash ID: b11db3d431a36dd8fdf085fe4349919d50f378d8
Stack T... -
- Mie Winstrup wrote:
> Giovanni Manghi wrote:
> > The same thing happens when using ogr2ogr, i.e.
> >
> > ogr2ogr... -
01:28 PM Bug report #21729: Reprojection not working on Mapinfo tabfiles
- Giovanni Manghi wrote:
> The same thing happens when using ogr2ogr, i.e.
>
> ogr2ogr -f "MapInfo File" output1.ta... -
- The same thing happens when using ogr2ogr, i.e.
ogr2ogr -f "MapInfo File" output1.tab Pointdata.tab -s_srs EPSG:30... -
- The same thing happens when using ogr2ogr, i.e.
ogr2ogr -f "MapInfo File" output1.tab Pointdata.tab -s_srs EPSG:30... -
- The same thing happens when using ogr2ogr, i.e.
ogr2ogr -f "MapInfo File" output1.tab Pointdata.tab -s_srs EPSG:30... -
- I have a mapinfo-tab file in coordinate system EPSG:3044. I want to reproject it to EPSG:25832, and keep it as a mapi...
-
- René-Luc ReLuc wrote:
> In the example provided by Paolo, the working layers are in HTTP the others are in HTTPS.
>... -
- Hi Alessandro,
Just tested.
Yes - introducing the ELSE rule with a non-zero size value fixes the issue.
Than... -
- Ok, after some more thoughts and an enlightning talk with Nyall, I decided that this is not a bug.
The behavior of... -
- Ok, after some more thoughts and an enlightning talk with Nyall, I decided that this is not a bug.
The behavior of... -
- I'm not really sure about how to fix this, and even if that's a bug: the issue is triggered by the symbol renderer wh...
-
- I'm not really sure about how to fix this, and even if that's a bug: the issue is triggered by the symbol renderer wh...
-
- I confirm this is still a bug in QGIS 3.4.6.
-
- Could you try deleting (make eventually a backup first) your configurations/profiles first?
/home/yourusername/.lo... -
- Could you try deleting (make eventually a backup first) your configurations/profiles first?
/home/yourusername/.lo... -
- Could you try deleting (make eventually a backup first) your configurations/profiles first?
/home/yourusername/.lo... -
- Could you try deleting (make eventually a backup first) your configurations/profiles first?
/home/yourusername/.lo... -
- When opening QGIS 3.4.6 on Ubuntu 18.04 LTS it flashes a black panel followed by a crash. This happens whether the re...
-
- Does the same happens also with PostGIS?
-
11:00 AM Bug report #21732 (Feedback): Items from table do not load properly
- I have a table with geography (SRID 4326) line items. While the majority of them show properly some of them do not sh...
-
- feature request rather than bug?
-
10:55 AM Bug report #21731 (Feedback): Fixed minimum width of Identify Results Dialog
- Mostly I work with the Identify Results Dialog docked in the main window at the right side.
In some QGIS sessions th... -
- Dario Bevilacqua wrote:
> pretty ridiculous
?
have you seen #20541-1 ?
also if there is some bug/regressi... -
12:25 PM Bug report #20541: "Topology Checker" and multipart (shapefiles)
- I have the same problem. I need to check the singlepart and the multipart features and since qgis 3.x it is no more p...
-
- Sorry, I commented in the wrong ticket, please ignore my previous comment.
-
11:31 AM Bug report #21703: Crash on QgsSymbolLayer call
- Version is 3.6.1 ant not 3.7! Sorry!
-
- definitely a separate bug, please file a ticket.
2019-04-01
-
01:48 AM Bug report #21710: QGIS 3.4.4 Madeira installed on Ubuntu 18.04 using Flatpak fails to perform ...
- Hi, I'm Aleix and I'm maintaining QGIS Flatpak packaging so far.
Thanks for reporting, if you ever want to get more ... -
- Cory Albrecht wrote:
> Bump.
And again.
2019-04-01T18:02:21 WARNING Erroneous query: UPDATE "Balance of... -
11:12 PM Bug report #21727 (Open): Feature attribute selection design bug
- In QGIS3 (both LTR and LR) while selecting data in feature attribute [not in edit mode], menu text is becoming white....
-
- Currently, the upgraded Style Copy/Paste is a HUGE improvement over the older tool, allowing for some/all pasting of ...
-
- Applied in changeset commit:qgis|b28227fa7f946e0c0ccba1b588a8ac47fef0c85f.
-
- Applied in changeset commit:qgis|b28227fa7f946e0c0ccba1b588a8ac47fef0c85f.
-
- Applied in changeset commit:qgis|b28227fa7f946e0c0ccba1b588a8ac47fef0c85f.
-
- Applied in changeset commit:qgis|b28227fa7f946e0c0ccba1b588a8ac47fef0c85f.
-
10:12 PM Bug report #18442: Trouble with geopackage fields length settings
- Trying to reproduce this issue with decimal fields, in fact it's just related to my locale setting. On my system the ...
-
- Yes, that's certainly the same bug.
If the other one is still an issue please file a new bug against 3.x. -
04:25 PM Bug report #18442: Trouble with geopackage fields length settings
- at least the "string-part" should be solved with #21714
-
- Is @nul@ disabled? Looks similar to a "WinGRASS errors":https://grasswiki.osgeo.org/wiki/WinGRASS_errors#The_startup_...
-
02:28 PM Bug report #21720 (Feedback): Processing: python error on startup
- The following error occurs on start up. Any advice would be appreciated....
-
-
07:24 PM Bug report #21724 (Closed): Version stated wrong
- In the about screen for the current version of QGIS 3.6.1 the screen reads:
We are working on 3.7-Master. It will g... -
- Applied in changeset commit:qgis|8ec02625c334f64acc6606539873c8facefbdd56.
-
- Applied in changeset commit:qgis|8ec02625c334f64acc6606539873c8facefbdd56.
-
05:00 PM Bug report #21722 (Closed): Debian conflicting packages
- After building QGIS from git and generating Debian packages, when trying to install all of them (with dpkg -i *.deb) ...
-
- Please:
update to the latest 3.4 release, 3.4.0 is old
try with a new (qgis) profile with *no* 3rd party plugin... -
- Please:
update to the latest 3.4 release, 3.4.0 is old
try with a new (qgis) profile with *no* 3rd party plugin... -
- Please:
update to the latest 3.4 release, 3.4.0 is old
try with a new (qgis) profile with *no* 3rd party plugin... -
- Please:
update to the latest 3.4 release, 3.4.0 is old
try with a new (qgis) profile with *no* 3rd party plugin... -
- h2. User Feedback
When I was saving my new style
h2. Report Details
*Crash ID*: 219a0e03a14b33c1a5edbaf44028... -
- Digging into this now, the issues is triggered by a DD expression on the symbol size based on map scale, which is of ...
-
- h2. User Feedback
I have a print layout with items.
I selected some items, copied and pasted them into a new layo... -
05:34 PM Feature request #21692: XYZ Tiles base map not working on QGIS Server with GetMap wms request
- In the example provided by Paolo, the working layers are in HTTP the others are in HTTPS.
To fix it, you have to u... -
- I confirm the issue, see attached project.
-
-
- PR https://github.com/qgis/QGIS/pull/9671
-
- PR https://github.com/qgis/QGIS/pull/9671
-
- PR https://github.com/qgis/QGIS/pull/9671
-
- PR https://github.com/qgis/QGIS/pull/9671
-
- hm - strange.
What do you suggest?
I am happy to upgrade our server one day (not immediately) - but I guess tha... -
- Andreas Neumann wrote:
> Thanks for having a look at the issue. In my case (PostgreSQL 10, Postgis 2.4) the vacuum a... -
- Hi Jürgen,
Thanks for having a look at the issue. In my case (PostgreSQL 10, Postgis 2.4) the vacuum analyze did n... -
- Andreas Neumann wrote:
> Maybe this line should be:
>
> if ( !mIsQuery && mUseEstimatedMetadata && mSqlWhereC... -
- Maybe this line should be:
if ( !mIsQuery && mUseEstimatedMetadata && mSqlWhereClause.isEmpty() )
-
10:35 AM Bug report #21718: Inconsistent layer extent between ST_Extent and ST_Estimated_Extent
- the culprit might be here https://github.com/qgis/QGIS/blob/master/src/providers/postgres/qgspostgresprovider.cpp#L3240
-
- Issue is that QGIS uses the ST_Estimated_Extent() from Postgis as layer extent, which may differ from real extent giv...
-
- More info:
SELECT 1 AS pk, st_estimated_extent('ameisen_1700','ameisenschutz','geom') AS geom
run in Postgis
... -
- This issue might not be a server issue.
We are experiencing strange things on the Desktop with this data as well (... -
- Forgot to add the URL of the WMS:
https://services.geo.zg.ch/ows/TestClip -
- We have a strange situation of a WMS service where there is only one layer in the project.
If the layer is loaded ... -
-
03:49 PM Bug report #21721 (Open): Disconnect between raster symbology in Layers Panel and Layer Properties
- When using pyqgis to style raster layers, the layer properties symbology tab does not get updated with the informatio...
-
03:27 PM Bug report #20536: Redrawing raster layer after file changed in QGIS?
- Hinders the work of my plugin that downloads raster data based on current extent and redraws it, now has to create ne...
-
- nicolas zzzz wrote:
> Thanks for the hints.
Don't mix packages from debian and pypi. PyQt5 in debian/ubuntu used... -
02:48 PM Bug report #21312: recipe for target 'python/core/sip_corepart0.cpp' failed
- Thanks for the hints.
Hmm, I thought the python package named @PyQt5-sip@ from https://pypi.org/project/PyQt5-... -
-
- nicolas zzzz wrote:
> Actually, sip 4.19.7 which is shipped from Ubuntu 18.04 main repositories doesn't have a "-n" ... -
-
11:45 AM Bug report #21698: QGIS crash when deleting layers
- Ok,I deinstalled QGIS3, cleaned registry and deleted profiles folder. I got fresh osgeo4w-setup-x86_64.exe and reinst...
-
09:36 AM Feature request #21719 (Open): trace/streamline visualisation
- Add trace/streamline visualisation of vector quantities (arrows)
https://prideout.net/blog/streamlines/
http://ww... -
- Applied in changeset commit:qgis|013bdf9405ae428e8ea5ce38f272f0cdfaaa2ee8.
-
- Applied in changeset commit:qgis|013bdf9405ae428e8ea5ce38f272f0cdfaaa2ee8.
-
06:01 AM Bug report #21717: QGIS is assuming first column from Oracle DB is the primary key
- Test scenario would be create table/view with non unique IDs in first column, set last column with unique IDs as prim...
-
- When trying to load a table into Oracle with primary key GID (1st column) with non unique IDs, an error shows "Primar...
2019-03-31
-
- Thanks Andrea for having reported upstream.
-
- Fixed in gdal
-
> As I said: "It shows up even when all layers show no errors when checked with the tools in the processing toolbox...-
- Giovanni Manghi wrote:
> what if you first clean your input with the "fix geometries" tool in the Processing toolbox... -
- what if you first clean your input with the "fix geometries" tool in the Processing toolbox?
-
- When you try to create a feature by tracing other features in other layers, the tracing tool will often stop working ...
-
- On Mac OS X 10.12.6 I encounter no delays on File Save or File Open dialogs with QGIS version 3.6.0-Noosa.
-
- PR https://github.com/qgis/QGIS/pull/9661
-
- PR https://github.com/qgis/QGIS/pull/9661
-
- PR https://github.com/qgis/QGIS/pull/9661
-
- Fields created for string values are set to length=255 even if they contain much longer texts:
To reproduce:
# ... -
- Any chance to fix this issue in the life of 3.4 LTR? The issue is still present in 3.4.6 and 3.6.1.
-
- This issue is still present in 3.4.6 and 3.6.1
@Matthias Kuhn: Can you confirm? Thanks. -
- no more reproduceable with 3.4.6 and 3.6.1
-
-
- The mouse cursor of some tools (for instance: node, move, line offset, delete part, delete ring, rotate, simplify) is...
2019-03-30
-
- Jürgen Fischer wrote:
> apparently python3-gdal is missing from that flatpak. Not sure, but I think this should go ... -
- apparently python3-gdal is missing from that flatpak. Not sure, but I think this should go to https://github.com/fla...
-
- apparently python3-gdal is missing from that flatpak. Not sure, but I think this should go to https://github.com/fla...
-
- I think (not 100% sure) flatpack is not an officially supported installer, so you may need to solve some dependencies...
-
05:51 AM Bug report #21710 (Closed): QGIS 3.4.4 Madeira installed on Ubuntu 18.04 using Flatpak fails to...
- Error log
----------
2019-03-30T10:16:33 INFO gdal_polygonize.py /home/arjun/indiagisdata/telangana/telangan... -
- You can use the existing "attribute" function, eg
attribute($currentfeature, @fieldparametername) -
- Hans-Peter Klossek wrote:
> Hello folks,
>
> I have a feature request:
>
> It would be nice to implement a ... -
- Please try with a new/clean qgis profile, no 3rd party plugins.
-
- Please try with a new/clean qgis profile, no 3rd party plugins.
-
- Please try with a new/clean qgis profile, no 3rd party plugins.
-
08:44 PM Bug report #21712 (Feedback): QGIS Mac crashes when quitting
- When quitting QGIS Mac, the application will crash.
Process: QGIS [15170]
Path: /A... -
- Giedrius Vaivilavičius wrote:
> I upgraded to Debian buster. There is no problem with QGIS 3.7.0. Are you planning t... -
08:30 PM Bug report #21582: Postgres connection - login credentials / authentication
- I upgraded to Debian buster. There is no problem with QGIS 3.7.0. Are you planning the fix backported to 3.4 ltr?
-
- Giedrius Vaivilavičius wrote:
> Jürgen Fischer wrote:
>
> > Which distribution are you using?
>
> Debian 9 (st... -
- Jürgen Fischer wrote:
> Which distribution are you using?
Debian 9 (stretch)
-
- In QGIS Mac, the Quit menu is disabled.
But the shortcut ⌘Q does work.
Plus it is not localised for non English ver... -
- Check in the system preferences if you unactivated QGIS to control the computer.
When I uncheck QGIS, the freezes di... -
12:07 PM Bug report #21495: Deleting shapefiles from the browser panel does not delete all the files
- Andrea Giudiceandrea wrote:
> It seems to me that this is true for .cpg files only.
Just now this was super fast ... -
- Alessandro Pasotti wrote:
> I'm afraid this goes upstream to OGR/GDAL: we are using OGR calls to delete the OGR laye...
2019-03-29
-
- Giedrius Vaivilavičius wrote:
> So but for me the repository (https://qgis.org/debian-nightly) gives only 3.5.0.
... -
- So but for me the repository (https://qgis.org/debian-nightly) gives only 3.5.0.
-
- Giedrius Vaivilavičius wrote:
> with 3.5.0-Master the problem does not occur
master is currently 3.7.0 -
- with 3.5.0-Master the problem does not occur
-
- Giedrius Vaivilavičius wrote:
> problem persist on latest version of QGIS (3.4.6 and 3.6.1)
The fix is not backpo... -
- problem persist on latest version of QGIS (3.4.6 and 3.6.1)
-
11:00 PM Bug report #21415: Couldn't load plugin 'processing'
- I got this error message, too (QGIS 3.6, Ubuntu 18.04). The error was evoked by a installed GDAL-version (2.3.2), whi...
-
- Confirmed on Linux too.
-
- Confirmed on Linux too.
-
- Confirmed on Linux too.
-
- Confirmed on Linux too.
-
- There is a python error when I try to see layer preview in DB Manager. (see attached gif)
*Python error is below ▼... -
- have you tried the v.clean tools in the processing toolbox, also by enabling the parameter for snapping? GRASS makes ...
-
- I'd love to see the Fix Geometries tool be made a bit more robust to help repair topological issues, such as psuedo-n...
-
-
- find requested data in attached ZIP.
To replicate just open gqz, open toolbox and import script/model, in case it'... -
- Could you please attach the script/model and sample data to allow us replicate? thanks!
-
- Could you please attach the script/model and sample data to allow us replicate? thanks!
-
- Background:
(1) Script selects point objects, which then shall be exported to new layer for further use in v.net.
... -
06:49 PM Feature request #21707 (Closed): Have Processing-File Tools-Download File work for FTP sites.
- I closed this after realizing it is a duplicate. Sorry.
-
- Trying to use the Download file processing algorithm for files on ftp sites causes an error:
"Download failed: No su... -
- It is by design that processing now spits outputs in gpkg rather than other formats. This tool has the particularity ...
-
- It is by design that processing now spits outputs in gpkg rather than other formats. This tool has the particularity ...
-
05:35 PM Bug report #21706 (Rejected): Split Vector Layer only saving geopackage
- In qgis ltr 3.4.5 and 3.4.6 on windows the split vector layer algorithm is only saving results as geopackages. I hav...
-
- I cannot reproduce with test data on master/Linux Ubuntu 18.10
-
03:59 PM Bug report #21704 (Open): algorithm "Eliminate selected polygons" works only with the result form...
- I try to merge a few selected polygons with their neighbors using the tool "Eliminate selected polygons" (with mode "...
-
- h2. User Feedback
It crashes when I try this:
layer = iface.activeLayer()
renderer = layer.renderer()
symbol = ... -
- Nyall Dawson wrote:
> There's already the "package layers" algorithm in the processing toolbox, which allows for man... -
- Upgraded to 3.6.1 - now this is working perfectly
-
- I am generating an atlas. For the various sheets, I need to have a textbox in different places - either the left or r...
-
- I can confirm the problem is related to the html label
I opened my new project and saved as .qgs text file
Then I l... -
- I was able to isolate the problem
I created item by item a new layout in a new project
As I added map frames to the... -
-
- Nyall Dawson wrote:
> There's already the "package layers" algorithm in the processing toolbox, which allows for man... -
- Giovanni Manghi wrote:
> > 4hr25m of CPU time on this import and it still is hung
>
> this is with the "package l... -
> 4hr25m of CPU time on this import and it still is hung
this is with the "package layers" tool?-
- Giovanni Manghi wrote:
> > That sounds amazing!
> >
> > I'm not sure the behavior above is directly related thoug... -
- There's already the "package layers" algorithm in the processing toolbox, which allows for many layers to be added to...
-
01:30 PM Bug report #21701 (Closed): Hypsometric Curves GDAL algorithm gives an error.
- ...
-
01:03 PM Bug report #21227 (Open): Geopackage layer rename in DB Manager does not update f_table_name valu...
-
01:01 PM Bug report #21700 (Open): Encoding for User name authentication when using http(s) protocol for v...
- Many https services use email address as a user name. This cannot be used directly in QGIS as the "@" character not p...
-
- Ok, understood. I disabled all plugins except processing, which I need to run my scripts. I restarted my computer, st...
-
- Ok, understood. I disabled all plugins except processing, which I need to run my scripts. I restarted my computer, st...
-
- Ok, understood. I disabled all plugins except processing, which I need to run my scripts. I restarted my computer, st...
-
- Ok, understood. I disabled all plugins except processing, which I need to run my scripts. I restarted my computer, st...
-
- Ok, understood. I disabled all plugins except processing, which I need to run my scripts. I restarted my computer, st...
-
- Ok, understood. I disabled all plugins except processing, which I need to run my scripts. I restarted my computer, st...
-
- Ok, understood. I disabled all plugins except processing, which I need to run my scripts. I restarted my computer, st...
-
- Please also note that sometimes is not enough to just disable 3rd party plugins: there have been cases were faulty 3r...
-
- We ask to **temporarily** run QGIS with python plugins disabled because we need to know if the bug is in QGIS core or...
-
- Hm. Have restarted QGIS (before your response, plugins enables like in 1st attachment) and could delete layers w/o cr...
-
- Hm. Have restarted QGIS (before your response, plugins enables like in 1st attachment) and could delete layers w/o cr...
-
Are you sure you didn't do anything else?
QgsVectorLayerUndoCommandRenameAttribute sais something different.
...-
- h2. User Feedback
Started QGIS from Start menu. Opened recent project. Deleted layers (type shp and gpkg). Did not... -
- Actually, sip 4.19.7 which is shipped from Ubuntu 18.04 main repositories doesn't have a "-n" flag: as stated here ht...
-
- Jonas Pedersen wrote:
> Hi,
>
> I don't know the procedure, but are there any other steps I need to take to get t... -
10:26 AM Bug report #21575: QGIS doesn't work properly with WFS 2.0.0 combined with OGC HTTP URI srsName s...
- Hi,
I don't know the procedure, but are there any other steps I need to take to get the PR associated with this is... -
- I joined a table layer to some geodata. Now some features got new attribute values while others got NULL values.
I... -
- I agree. Disabling thousand separator globally would already solve our main problem. We ware not obliged to serve the...
-
- Here is one QGIS server (3.6) WMS service:
https://services.geo.zg.ch/ows/Gewaessernetz?SERVICE=WMS&REQUEST=GetCap... -
- In QGIS Server 2 the QGIS server exposed LAYER groups as well as the top level as 'queryable="1"'.
In QGIS Server ... -
07:46 AM Bug report #20848: Issue exporting raster layer to Geopackage
- Frank Sokolic wrote:
> I can confirm this issues also exists in QGIS 3.4.5 on Windows.
>
> It can be replicated a... -
- PR: https://github.com/qgis/QGIS/pull/9649
-
- PR: https://github.com/qgis/QGIS/pull/9649
-
- PR: https://github.com/qgis/QGIS/pull/9649
2019-03-28
-
- Confirmed also on 3.6/Linux.
-
- Confirmed also on 3.6/Linux.
-
- Confirmed also on 3.6/Linux.
-
- Confirmed also on 3.6/Linux.
-
09:58 PM Bug report #21693: QGIS 3.4.6 crashed when I tried classifying a layer
- Giovanni Manghi wrote:
> Raphael Dumas wrote:
> > Giovanni Manghi wrote:
> > > is this data dependent? is 100% rep... -
- Giovanni Manghi wrote:
> Raphael Dumas wrote:
> > Giovanni Manghi wrote:
> > > is this data dependent? is 100% rep... -
- Raphael Dumas wrote:
> Giovanni Manghi wrote:
> > is this data dependent? is 100% replicable?
>
> Two stack trac... -
- Giovanni Manghi wrote:
> is this data dependent? is 100% replicable?
Two stack traces below.
h2. User Feedback... -
- is this data dependent? is 100% replicable?
-
- is this data dependent? is 100% replicable?
-
- h2. User Feedback
I clicked "Classify" trying to style a line layer with 8 features by "categorized" with a unique... -
10:30 PM Bug report #21674: QGIS crashes soon after opening raster heavy project with some vector layers w...
- I forgot to mention that the problems were with an old project made with 2.18. Tried it with a clean profile, chrashe...
-
- I love that one is easily able to load/copy/reference data from other QGIS projects by using the browser. Pretty neat...
-
> That sounds amazing!
>
> I'm not sure the behavior above is directly related though. It should be able to hand...-
- Giovanni Manghi wrote:
> > There should be the means to batch import data into a geopackage, especially if one is tr... -
> There should be the means to batch import data into a geopackage, especially if one is trying to migrate away fro...-
- The time it takes to import a number of layers into a geopackage seems to increase exponentially. For instance, there...
-
- Related to #21694 :
I'd like to see the process of batch importing be easy for geopackages. A GUI dialog to load mul... -
- Also on Linux.
-
- Also on Linux.
-
06:24 PM Bug report #21691 (Closed): Styles stored in QML files with same name as layer no longer auto loaded
- In QGIS 3.2 if I save a vector layer (GeoPackage) as My_Layer.gpkg and I save the styles in a QML file with the same ...
-
07:09 PM Feature request #21692 (Open): XYZ Tiles base map not working on QGIS Server with GetMap wms request
- I have a project in QGIS desktop with some XYZ Tiles base maps. Everything works fine on desktop version, that is all...
-
- There currently isn't even a way to disable the thousand separators in server at all, is there? @locale/showGroupSepa...
-
- For some numeric fields thousand separator are desirable (e.g. for large numbers), but for other numeric fields, they...
-
- Same behaviour with 3.6.1
-
- Hello
I am tgryiong to print a layout with 2 locked layers maps (different layers) and some HTML labels
I was tryin... -
-
05:34 PM Bug report #19564: PostgreSQL sequences not always used when adding feature
- Unfortunately no, changing the widget type from Range to Text does not resolve the issue.
The only work around I w... -
-
- Does it change anything if you change the widget type from TEXT to RANGE or vice-versa?
-
09:33 AM Bug report #19564 (Reopened): PostgreSQL sequences not always used when adding feature
- Thanks David for your feedback. We used trigger to increment sequence as a workaround.
-
- Please look for similar reports before filing new ones.
-
- Please look for similar reports before filing new ones.
-
04:37 PM Bug report #21689 (Closed): QGIS Crash on Exit
- h2. User Feedback
Exiting after loading a CSV then converting to SHP
h2. Report Details
*Crash ID*: a3eb9e00... -
- Zonal Statistics tries to write the statistics to the file/layer chosen in "Vector layer containing zones".
I have... -
- Giovanni Manghi wrote:
> > @Giovanni, Thank you for desire to help in making these CRS in QGIS permanent/embedded.
... -
> @Giovanni, Thank you for desire to help in making these CRS in QGIS permanent/embedded.
they are already in QG...-
- Ben Hur Pintor wrote:
> Alvin Laurio wrote:
> > The EPSG:102453, 102454, 102455, 102456,102457 and 102458 does not ... -
> What is an upstream issue? I'm new in this forum.
> How we can ensure that a final adjustment will be made?
...-
02:26 AM Bug report #21626: crash on open
- @Hennning: thanks for your workaround - it enabled me to open a (2.14) project;
it subsequently crashed whilst try... -
- https://build.opensuse.org/package/show/Application%3AGeo/saga-gis shows that SAGA build failed; hence it is not avai...
-
01:17 AM Bug report #21626: crash on open
- Jeremy Spurway wrote:
> Hi,
>
> I've recently re-built my laptop with a new install of opensuse 15.0; I retained ... -
- Please try with a new/clean profile and no 3rd party plugins installed.
-
- Please try with a new/clean profile and no 3rd party plugins installed.
-
10:22 AM Bug report #21684 (Feedback): QGIS Crashed on exit
- Crash ID: 131aa1cfd3b2d4b43cc7288ec22d10a27aafca25
Stack Trace
QgsTransformEffect::readProperties :
QgsLay... -
- seems to work fine now
-
- seems to work fine now
-
- seems to work fine now
-
- Is implemented in recent QGIS versions.
-
- Is implemented in recent QGIS versions.
-
- Seems to work in 3.4 and 3.6
-
- Seems to work in 3.4 and 3.6
-
- In QGIS Server 3.6 (most likel also in mater, but not tested), GetLegendGraphics response images do not correctly dis...
-
- Please try also with a new/clean profile and no 3rd party plugins installed.
-
- Please try also with a new/clean profile and no 3rd party plugins installed.
-
- Please try also with a new/clean profile and no 3rd party plugins installed.
-
- h2. User Feedback
Just editet some points in a spatiallitelayer
h2. Report Details
*Crash ID*: 9ef4dc1f72c87... -
- I am getting the same issue with QGIS 3.6 (and 3.4) even with a clean profile. It's ok in QGIS 3.2
2019-03-27
-
08:49 PM Bug report #21626: crash on open
- I found a workaround but that is not a solution surviving the next update.
What is an upstream issue? I'm new in thi... -
- Closing as upstream issue?
-
- It' not QT - it's libproj.
Found a workaround:
https://bugzilla.opensuse.org/show_bug.cgi?id=1130269
In short:... -
- My environment is openSuse 15.0 and QGIS 3.6.0 too and I have the same problem.
QGIS starts up to the message QGIS ... -
-
04:16 PM Bug report #21682 (Closed): Crash
- Crash ID: 62f1fcd2045780cb9f127836e6b579b8665f3e63
Stack Trace
proj_lpz_dist :
proj_lpz_dist :
QgsCoordinat... -
04:17 PM Bug report #21683 (Open): Subscript and Superscript Single Labels expression bug
- Hello,
I am trying to label my polygons using Single Label option.
I have set labeling to be in relation to the... -
- Tony Walters wrote:
> Hi Giovanni,
>
> I almost feel embarrassed like I'm reporting errors that are unique to my ... -
- Hi Giovanni,
I almost feel embarrassed like I'm reporting errors that are unique to my install.
Here is a typic... -
01:54 PM Feature request #21681 (Open): Data defined grid properties in composer
- It would be incredibly useful to be able if grid and graticule in QGIS Print Composer can controlled from a variable ...
-
- Hi Jurgen,
I believe it was also fixed in commit:8e70c08b18f6897da2b54a48f5aa025c27171475, but the .bat files were... -
- Applied in changeset commit:qgis|8e70c08b18f6897da2b54a48f5aa025c27171475.
-
- Applied in changeset commit:qgis|8e70c08b18f6897da2b54a48f5aa025c27171475.
-
- Gerhard Spieles wrote:
> could be. it depends for me, wether rel 14 is later than f114ad89 or not.
What is "rel 14"? -
-
07:41 AM Feature request #21601: Rotate vector polygon feature by specified vertex
- Harrissou Santanna wrote:
> > 1.Using this "ctrl rotate" feature made my QGIS crash a few times (QGIS 3.4.5, Debian ...
2019-03-26
-
- could be. it depends for me, wether rel 14 is later than f114ad89 or not. But i dont know this, because qgis will not...
-
- Duplicate of #21672 ?
-
- After update 3.7 to rel 14 from OSGEO4W64 , QGIS will not start. A popup appears. pdf is attached.
-
- Alvin Laurio wrote:
> The EPSG:102453, 102454, 102455, 102456,102457 and 102458 does not fall on the correct positio... -
> The EPSG codes (102453, 102454, 102455, 102456,102457 and 102458) embedded in QGIS 3.6 CRS of the world cannot be...-
- Giovanni Manghi wrote:
> CRSs codes in the range of the hundreds of thousands are not EPSG (as far as I know and as ... -
-
- This should be posted also/or in the osgeo4w bug tracker.
-
02:37 PM Bug report #21678 (Closed): QGIS 3.4.6 cannot find GRASS 7.6.1 on Windows
- As the title says: QGIS 3.4.6 cannot find GRASS 7.6.1 on Windows OSGeo4W.
The symptom is the same as in issue #213... -
-
05:13 PM Bug report #21677: Issue loading Oracle layers
- 2.18 it was good
At the beginning of the 3.4 it was good -
-
-
> Before I have no problem.
means in an older qgis release? -
- QGIS can add oracle layer.
In first time layer has visible, in second time (zoom - for example) the layer is invisi... -
- https://www.gdal.org/ogrmerge.html
this allows to merge into 1 layer many vectors OR to add several vectors/layers... -
- Please try with a new/clean profile.
-
- Please try with a new/clean profile.
-
-
- I tried on both Windows and Linxu on 3.6 and can't replicate (but maybe depends on what column is used to interpolate...
-
-
- Vladimír Hans wrote:
> I tried to load shp with vbr-3.prj in QGIS 3.6.1 and layer wasn't shifting. It's great. But Q... -
- Regardless of the data? or is data-dependent?
-
- For some reason this was removed
https://github.com/qgis/QGIS/blob/release-2_18/python/plugins/processing/algs/gra... -
- For some reason this was removed
https://github.com/qgis/QGIS/blob/release-2_18/python/plugins/processing/algs/gra... -
-
11:33 AM Bug report #21670: DB Manager - load sql query as layer with primary key
- another note : it seems to be specific to spatialite db. I tried with a postgis db and behaviour is normal...
-
- Should this be tagged as a regression?
-
- Jeremy Carnahan wrote:
> I guess we have to go back to an old version as well.
https://nyalldawson.net/2016/08/ho... -
> Please correct this annoying issue
https://nyalldawson.net/2016/08/how-to-effectively-get-things-changed-in-qgis/-
- If this is not an issue report but rather a question this should be posted in the proper channels, the users/devolper...
-
11:58 AM Bug report #21676 (Closed): QgsProcessingAlgorithm / add Layer to project
- Hi,
I am trying to add a layer to project in a QgsProcessingAlgorithm.
I tried the folowing code :
vlayer1 =... -
02:12 PM Bug report #18155: ImportError: QtWebEngineWidgets must be imported before a QCoreApplication ins...
- Giovanni Manghi wrote:
> Please check if this issue is still valid on QGIS 3.4.5 or 3.6.
Am I supposed to be able t... -
- Jeremy Spurway wrote:
> Now that 3.4.5 is no longer available on opensuse repositories, this bug should be re-named ... -
- Jeremy Spurway wrote:
> Now that 3.4.5 is no longer available on opensuse repositories, this bug should be re-named ... -
- Now that 3.4.5 is no longer available on opensuse repositories, this bug should be re-named to 'QGIS 3.6.0 crash on o...
-
- I think it was fixed in master a few days after the release: https://github.com/qgis/QGIS/pull/9247
-
- I think it was fixed in master a few days after the release: https://github.com/qgis/QGIS/pull/9247
-
08:59 AM Bug report #21675 (Closed): DBManager - load as new layer doesn't work
- Hi,
in QGIS version 3.6.0-Noosa QGIS code revision 58734527ab on W10 and Mint when I try to load a new layer from a ... -
- ok, I tried now with a release build of Qt 5.12.1 and the crash is still there.
I'm not yet 100% sure it's an upst... -
- ok, I tried now with a release build of Qt 5.12.1 and the crash is still there.
I'm not yet 100% sure it's an upst... -
08:24 AM Bug report #21668: composer legend feature count not correct when datasource is in a network folder
- In English :
My data is in a gpkg file on a server in my community, and when I copy the gpkg locally, the count of e...
2019-03-25
-
- Crash ID: 36e5fff2c48e71d647c0581f2dd04e87de5752ed
Stack Trace
QTextOption::wrapMode :
QTextOption::wrapMo... -
09:14 PM Bug report #18373: Annotation Scaling
- This really limits what you can do with customizing maps. I guess we have to go back to an old version as well.
-
06:30 PM Bug report #18373: Annotation Scaling
- We can't switch to v.3 from 2.8 due to this issue.
A lot of drawings have print layouts with annotations so is impos... -
- Here are some more screenshots of the behaviour. I have some of the editor form popup upon a new feature being creat...
-
- Here are some more screenshots of the behaviour. I have some of the editor form popup upon a new feature being creat...
-
- Here are some more screenshots of the behaviour. I have some of the editor form popup upon a new feature being creat...
-
- Here are some more screenshots of the behaviour. I have some of the editor form popup upon a new feature being creat...
-
- Last Friday I encountered a new error that I've never seen before. When editing a new PostGIS table in QGIS 3.6.0 I'...
-
- fixed in commit:5f7d4f5f0
-
- fixed in commit:5f7d4f5f0
-
- I updated osgeo4w installation and ended up with filenames such as qgis_ltr-dev-bin-ggrass76, qgis_ltr-dev-ggrass76 f...
-
- check for similar reports upfront please.
-
- check for similar reports upfront please.
-
03:41 PM Bug report #21671 (Closed): Crash when closing qGis-Desktop-Application
- The crash occurs randomly, in lets say 25% of Application Closures. Not sure, if project saves correctly.
Crash ID... -
- I tried to debug with Qt 5.11.2 and the crash goes deep into Qt libraries.
I cannot reproduce the issue with a deb... -
- I tried to debug with Qt 5.11.2 and the crash goes deep into Qt libraries.
I cannot reproduce the issue with a deb... -
- Went back to a laptop with 3.4 Madeira and IDW interpolation works correctly. Also ran 3.6 on the laptop and failed ...
-
- > 1.Using this "ctrl rotate" feature made my QGIS crash a few times (QGIS 3.4.5, Debian Stretch).
I think I also g... -
- Harrissou Santanna wrote:
> > It seems that currently the only option is to rotate the feature around its centroid.
... -
- Hi,
I use Win7 and Qgis 3.4 (or 3.6, the same bug appends)
I use DB manager for loading a layer in qgis.
If I do... -
02:12 PM Bug report #21573: QGIS Crashes when saving a project
- Have solved the problem by using ShellEXVeiwer and disabling none Microsoft shells which has fixed the problem
-
- I have followed those steps and created a new profile and do not have any 3rd party plugins installed, am experiencin...
-
- Sean Attridge wrote:
> I have downloaded both 3.6 and 3.4 with clean profiles but I continue to experience the same ... -
- Sean Attridge wrote:
> I have downloaded both 3.6 and 3.4 with clean profiles but I continue to experience the same ... -
- I have downloaded both 3.6 and 3.4 with clean profiles but I continue to experience the same problem when I try to sa...
-
- I have downloaded both 3.6 and 3.4 with clean profiles but I continue to experience the same problem when I try to sa...
-
- Upgrade to 3.4.6 - this was already fixed.
-
- Upgrade to 3.4.6 - this was already fixed.
-
09:37 AM Bug report #21669 (Closed): QGis crashes when connecting any data traveller to computer
- QGis crashes when connecting any data traveller to computer.
QGis is working, if I connect any USB drive or SD card... -
10:28 AM Bug report #21477: Shift layer from ArcGIS, SRS 5514
- I tried to load shp with vbr-3.prj in QGIS 3.6.1 and layer wasn't shifting. It's great. But QGIS didn't recognize cor...
-
- In english :
On export, counting entities in the legend displays [n / a] instead of the count for a categorized laye... -
-
05:44 AM Bug report #21667 (Closed): Crash in 3.4.6
- h2. User Feedback
Exiting program?
h2. Report Details
*Crash ID*: ad9906033e5836e656174a94ee1573e1316016c8
... -
- This is caused by a faulty plugin - try a clean profile with no plugins installed.
-
05:30 AM Bug report #21666 (Feedback): crash unload plugins on exit
- h2. User Feedback
h2. Report Details
*Crash ID*: 2158b01f96452b8cf079fabd6f476862ce1a56f9
*Stack Trace... -
- Applied in changeset commit:qgis|0cb0e387c2e784aae6b989b8faeb840a1e759841.
-
- Applied in changeset commit:qgis|0cb0e387c2e784aae6b989b8faeb840a1e759841.
2019-03-24
-
- Paths to data sources of virtual layers always use full paths when stored in projects (and full paths are expected wh...
-
- @ Giovanni: the package doesn't have anyone attributed as 'packager'
-
09:14 PM Bug report #21664 (Feedback): 3D view crashes QGIS
- h2. User Feedback
Crashes when I try to open 3D map view
h2. Report Details
*Crash ID*: 7349d704daa2c612627... -
08:44 PM Bug report #21363: Bug with scale bar in 3.4.4
- I'm adding on. The Print Composer for QGIS 3.6 does not accurately reflect the CRS units in the Scale Bar when addin...
-
- h2. User Feedback
I tried to load a 3D map view
h2. Report Details
*Crash ID*: 9bf34d4a608073e8e5d14b8e04b6f... -
- I had once added the tool to make the skeletons... I hope no one removed it, I'll have a look.
-
- I had once added the tool to make the skeletons... I hope no one removed it, I'll have a look.
-
05:15 PM Bug report #21662 (Closed): qgis grass v.voronoi processing tool incorrectly only allows point la...
- v.voronoi in grass also includes v.voronoi.skeleton to create skeleton center lines of areas/polygons. The dialog in ...
-
- CRSs codes in the range of the hundreds of thousands are not EPSG (as far as I know and as I can see, you can't find ...
-
- CRSs codes in the range of the hundreds of thousands are not EPSG (as far as I know and as I can see, you can't find ...
-
- The EPSG:102453, 102454, 102455, 102456,102457 and 102458 does not fall on the correct position and the values of X a...
-
-
2019-03-23
-
- And now 3.4.5 QGIS LTR is no longer available from https://download.opensuse.org/repositories/Application:/Geo/, so I...
-
- By clicking "cancel" many times eventually it will abort.
Clean install of 3.6 on new Intel 8700 6 core system.
Mul... -
- QGIS does not remove the default port number from HTTP/HTTPS requests "Host" header (in particular for WMS/WMTS/WFS/W...
-
-
- Upgraded to new system with a clean install of 3.6. This symptom has disappeared at the moment so we can close this ...
-
- In QGIS 3, *the WFS connection manager dialog window lacks options to override the* (GetFeature, DescribeFeatureType,...
-
- `Update: I have upgraded to a new Intel 8700 PC with 32GB ram and Geforce graphics. The sluggishness is not apparent...
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
-
02:48 AM Bug report #21247: Crash on export in any format to Arch E 600 dpi when using a lyer with inverte...
- After a bit of testing, I think it has to do with inverted polygons with a shapeburst fill (which I'm using as a mask...
-
- Giovanni Manghi wrote:
> Tried a number of times with a random project and didn't get any crash. Possibly is project... -
- confirmed on Linux too.
-
- confirmed on Linux too.
-
- confirmed on Linux too.
-
- confirmed on Linux too.
-
- I did some tests: the crash is always presented, the button is pressed to reset the scale factor. With any type of da...
-
- Hello, I will do more tests in the next days, to be able to define better what you ask me. And see if it just happens...
2019-03-22
-
- are the crashes project/data dependent? or it happens regardless the project/data?
-
- are the crashes project/data dependent? or it happens regardless the project/data?
-
- are the crashes project/data dependent? or it happens regardless the project/data?
-
- I noticed the following: it goes in crash, at the moment I click the button to reset the scale factor. If I write a v...
-
- I work with several map views at the same time. When I try to modify the scale factor, or any of the options of the a...
-
- I am experiencing the exact same behaviour as described by the original poster. Today for the first time I ran into ...
-
- I am experiencing the exact same behaviour as described by the original poster. Today for the first time I ran into ...
-
- Please try with a new/clean profile (no 3rd party plugins installed).
-
- Please try with a new/clean profile (no 3rd party plugins installed).
-
04:21 PM Bug report #21655 (Feedback): Software Crash
- I add the GeoReference Map in the project, then I create the new polygon shape layer and got the following error and ...
-
- for questions use the users/developers mailing lists, the qgis irc channel or gis.stackexchange. Thanks!
-
- for questions use the users/developers mailing lists, the qgis irc channel or gis.stackexchange. Thanks!
-
06:06 PM Bug report #21656 (Closed): How to insert result fonction in raster created
- Hello,
I am doing a script, but I have a problem with the insertion of the result that my calculation function pro... -
04:31 PM Bug report #21650: calculator not returning correct area
- Ah, I see. Thanks!
-
- Jonas Pedersen wrote:
> I have now supplied a PR that solves the problem and works with OGC HTTP URI srsName annotat... -
- I have now supplied a PR that solves the problem and works with OGC HTTP URI srsName annotation. But my travis build ...
-
12:39 PM Bug report #21635: Qgis Server prnting Problem on coordinate system EPSG:31254
- I use EQWC from
https://github.com/uprel/gisapp
which is a clone of QGIS-Web-Client 1
I can only offer teamviewe... -
- Johannes Metzler wrote:
> Unfortunately our qgis server is running in intranet only,
can't you set-up a test endp... -
- Unfortunately our qgis server is running in intranet only,
I used the same file just saved to another name and chang... -
-
- garret w wrote:
> I have tested on Ubuntu 18, QGIS 2.18.28, and tracing works as expected.
ok but I have tried on... -
- Snapping and avoid intersection do work also in between different layers.
-
- Snapping and avoid intersection do work also in between different layers.
-
- I work with two layers: ponds and catchment basins.
My catchment basins are already created and avoid overlap is on... -
- Please try on new/clean (QGIS) profile, no 3rd party plugins installed. If possible also change the subject to someth...
-
- Please try on new/clean (QGIS) profile, no 3rd party plugins installed. If possible also change the subject to someth...
-
10:42 AM Bug report #21653 (Feedback): unexpected error in nodetool
- Create New Shapefile - I started to create new point layer. I activated "Vertex Tool" Current Layer option. I started...
-
- Please change subject and description to English, thanks!
-
11:27 AM Bug report #21654 (Feedback): Crash after geometry check
- h2. User Feedback
after execution of geometry checker in 3.4.5 and 3.6
h2. Report Details
*Crash ID*: 563115... -
10:34 AM Bug report #20872: QGIS 3.5 not loading or saving multi-dimensional arrays properly from PostGIS ...
- Proposed PR : https://github.com/qgis/QGIS/pull/9610
Be aware that there is still a problem to deal with integer a... -
- I see, there is an additionnal issue when we use the plain text display (the list widget is working by the way).
I... -
- Fixed in master already
-
- Fixed in master already
-
03:06 AM Bug report #21651 (Closed): Adding TIN Interpolation to new Processing Modeler causes error
- When I drag TIN Interpolation into a new Processing Modeler window; I get the following error every time:
An error...
2019-03-21
-
- They are two totally different calculations - the PostGIS one is the equivalent of QGIS'
area($geometry)*0.000... -
- They are two totally different calculations - the PostGIS one is the equivalent of QGIS'
area($geometry)*0.000... -
- while using field calculator to calculate acres from ft (state plane 3435 (ft) > acres). I am not getting expected re...
-
- I have tested on Ubuntu 18, QGIS 2.18.28, and tracing works as expected.
-
- Pull request submitted: https://github.com/qgis/QGIS/pull/9598
-
-
09:35 PM Bug report #21649: Add features in WFS-T layer with snapping indexing issue
- No, is the same behavior as well.
-
- Did it worked as expected on qgis desktop 2.18?
-
Steps to reproduce:
Load a WFS layer with edition permissions.
Activate snapping for the layer and try to add a ...-
> I cannot find the Mac installer for QGIS 3.7-master, as suggested here
try this ones https://lutraconsulting....-
07:12 PM Bug report #21648 (Feedback): Cannot open netCDF file in QGIS 3.4.5
- Hello,
I am trying to open a netCDF file in QGIS 3.4.5 on a Mac (Mojave), but I receive the error message:
<pre... -
-
06:57 PM Bug report #11648: Problems with sizes and letter-spacing in HTML-frames
- Yes, I meant 3.7.0
-
- Antoine Lafranchis wrote:
> This issue is still valid... Can someone reopen it please?
> I attach a project created... -
- No, sorry: it was a different problem and I could not reproduce the issue described in this ticket.
The only way t... -
- I've been able to reproduce a similar bug on a different workflow.
I'm still struggling to reproduce it in a test bu... -
- I've been able to reproduce a similar bug on a different workflow.
I'm still struggling to reproduce it in a test bu... -
- You are right Alessandro, I got confused...
So it seems the WFS connection manager lacks an option to override the... -
- Wasn't this issue for WFS?
-
- Lilah R, you can override the "wrong" GetMap URI provided in the capabilities, using the option "Ignore GetMap/GetTil...
-
- Currently, the Log Messages panel can only be docked to the top or bottom of the Map Canvas. Oftentimes, I don't wish...
-
- It respects location, just not status (enabled/docked or not).
Apologies. -
- If you add the Python Console panel to your QGIS layout and dock it somewhere, it will not return to the same locatio...
-
- I think that it'd be beneficial to have the Results and Processing History panels combined as they are related to one...
-
- I'd like to see the option to make the Processing History window available as a Dockable Panel.
This would be very... -
- A nice UI/UX aspect of ESRI products is the fact that layers are aliased in selection drop-downs and other menus by t...
-
- I think it'd be great if the Show Feature Count was a bit more detail-rich.
For instance, on a layer that has 714 ... -
- Julien Cabieces wrote:
> Does it look like what you're seeing on your version of QGIS?
I did not use the new lis... -
- I think it'd be pretty intuitive/helpful for there to be the ability to Show Feature Count for Group objects. This wo...
-
- I'd like to see the option to specify a few default behaviors for the Layers list for all new layers generated and ad...
-
- Please:
change the subject to a more descriptive one
also add the details about how you got the crash and how w... -
- Please:
change the subject to a more descriptive one
also add the details about how you got the crash and how w... -
03:56 PM Bug report #21639 (Closed): Crash report
- Crash ID: 36812cd60eb184b37a6fdcaa2aca9fe84f5ee7d5
Stack Trace... -
- Johannes Metzler wrote:
> same issue, just badly expressed,
> it looks like the resulting area of the getprint requ... -
- same issue, just badly expressed,
it looks like the resulting area of the getprint request ends up in a different ar... -
> it looks like the calculated area is wrong for this projection
this is a different issue? are we talking getpr...-
> it looks like the calculated area is wrong for this projection
this is a different issue? are we talking getpr...-
> it looks like the calculated area is wrong for this projection
this is a different issue? are we talking getpr...-
- Yes, it worked on previous versions,
it looks like the calculated area is wrong for this projection
-
- Did it worked as expected on QGIS Server 2.18?
-
- Did it worked as expected on QGIS Server 2.18?
-
- Qgis server Printing results in empty map when the coordinat system of project and layers is EPSG:31254
problem does... -
- Bump.
-
- Confirmed here also on Linux.
-
- Confirmed here also on Linux.
-
01:10 PM Bug report #21636: QGIS crashes when editing a polygon layer
- o.k will work now with a clean profile.
Still working with my old profile I got another Crash, I`d like to share:
... -
- Can you try with a new/clean profile (no 3rd party plugins), thanks!
-
- Can you try with a new/clean profile (no 3rd party plugins), thanks!
-
- Can you try with a new/clean profile (no 3rd party plugins), thanks!
-
- h2. User Feedback
I was editing a MulitPolygon layer (*.gpkg). In the Digitizing Option of this layer I set "Geome... -
- Friedemann Scheibler wrote:
> You're right. It's working now with Grass 7.6.
does it on 3.4.5? -
12:17 PM Bug report #20646: i.segment (GRASS 7.4.2) only produces a Goodness Raster but no Segmented Raster
- You're right. It's working now with Grass 7.6.
-
11:25 AM Bug report #21638 (Open): The Grass7 processing toolbox option dialogue should include a way to s...
- As I understand it, the Python interface layer to Grass attempts to locate the Grass binary in the "GRASS folder" dir...
-
- Trying to run the r.sun grass7 function from the Processing toolbox gives the following output:
"ERROR: insol_time... -
- I have created a PR for the issue: https://github.com/qgis/QGIS/pull/9594
-
- > It seems that currently the only option is to rotate the feature around its centroid.
Not that true: you can use... -
- This is more of a missing feature than a bug and still valid for >3.4
-
- This is more of a missing feature than a bug and still valid for >3.4
-
- This is more of a missing feature than a bug and still valid for >3.4
-
- This is more of a missing feature than a bug and still valid for >3.4
-
- Open a Mesh layer properties tab
Enable the Symbology (or Style, depending on the version) tab
You have different t... -
- > File DataSourceManager.PNG added
The XMDF file represents datasets. That means data that sits on top of the mesh... -
- Applied in changeset commit:qgis|c66159bd2dfb9fb6225c6ca1431bcf46a176cd32.
-
- Applied in changeset commit:qgis|c66159bd2dfb9fb6225c6ca1431bcf46a176cd32.
-
- Applied in changeset commit:qgis|db75122089ffa03bae2716080f235c59d2bfd18c.
-
- Applied in changeset commit:qgis|db75122089ffa03bae2716080f235c59d2bfd18c.
-
-
- The expression needs to be
"1_field"
i.e. the field name MUST be double quoted. When running through the GUI ... -
- The expression needs to be
"1_field"
i.e. the field name MUST be double quoted. When running through the GUI ... -
02:57 AM Bug report #21633 (Open): Create Print Layout
- When I try to create a print layout, don't open the options, I just see a square.
2019-03-20
-
-
- On Windows 7 64 bit with QGIS 3.4.5-1 LTR (commit:89ee6f6e23) and QGIS 3.7.0-10 Master (commit:1205fbfa71),
the *"... -
- Arno Lepisk wrote:
> I do not know, 3.6 is the first version I have used for this
Can you just download and insta... -
- I do not know, 3.6 is the first version I have used for this
-
- Did it worked as expected on QGIS Server 2.*?
-
- Please try with a new/clean profile, no 3rd party plugins installed.
-
- Please try with a new/clean profile, no 3rd party plugins installed.
-
- h2. User Feedback
We are digitizing sidewalk features. This crash occurred while trying to delete point and line f... -
- Lucy Warman wrote:
> Hi,
>
> Xmdfs can be quite large. I'll find a small one. Where can I send it? It won't be sm... -
07:54 PM Bug report #21565: XMDF file type missing from Madiera 3.4.5
- Hi,
Xmdfs can be quite large. I'll find a small one. Where can I send it? It won't be small enough to upload via t... -
- Lucy Warman wrote:
> Hi Peter,
>
> We managed to try on version 3.6 and we have the same issue, there doesn't app... -
- Hi Peter,
We managed to try on version 3.6 and we have the same issue, there doesn't appear to be any sort of XMDF... -
- a packaging issue maybe? who prepared the ones for suse?
-
- N.B. debug packages 'delay' rather than 'stop' core dump
-
- Hi,
I've recently re-built my laptop with a new install of opensuse 15.0; I retained my /home/ directory, but mask... -
- Martín Fernando Ortiz wrote:
> I disabled the acceleration but still appear. I copy the report here
does it happe... -
02:57 PM Bug report #21621: QGIS Crashed Windows when close qis
- I disabled the acceleration but still appear. I copy the report here
h2. User Feedback
I disabled the acelerati... -
- Can you try to disable Acceleration under QGIS "options"?
-
- No crash here loading/closing your project, windows and qgis 3.4.5.
-
- No crash here loading/closing your project, windows and qgis 3.4.5.
-
- Yes, a PR is much better, see https://docs.qgis.org/2.18/en/docs/documentation_guidelines/first_contribution.html
-
- In have tried to edit the function QgsGmlStreamingParser::readEpsgFromAttribute (line 1207) in qgsgml.cpp. I have edi...
-
06:45 PM Bug report #21619: Check geometries crashing QGIS 3.6
- Giovanni Manghi wrote:
> Please attach sample data and the exact specific configurations you are using in the geomet... -
- Please attach sample data and the exact specific configurations you are using in the geometry checker.
-
- Please attach sample data and the exact specific configurations you are using in the geometry checker.
-
- Please attach sample data and the exact specific configurations you are using in the geometry checker.
-
- I see the same, if this worked as expected on 2.* we can tag this as a regression, cheers!
-
03:06 PM Bug report #21627 (Feedback): WMS infotool does not show doubles and/or numbers?
- Anybody can confirm:
Having a (geoserver) WMS showing points, then using the i-tool, the Identify-Tool panel does ... -
- Patrice V wrote:
> Hi,
> it's been 6 days I've made a post and nobody replies :(
> it's blocking me for porting a... -
- Hi,
it's been 6 days I've made a post and nobody replies :(
it's blocking me for porting a plugin to qgis 3
Wh... -
05:57 PM Feature request #21630 (Open): QGIS does not support the current version (version 2) of the SQL S...
- After editing the geometry of a feature from a SQL server Spatial connection in SoftWare supporting SQL Server Spatia...
-
05:43 PM Bug report #21629 (Closed): r.mapcalc.simple shows by default False for Raster layer A and True f...
- QGIS 3.4.5, 3.6.0...
r.mapcalc.simple shows by default (see pic):
* False for layer A
* True for layer B
* True... -
05:08 PM Feature request #21628 (Open): Expression values in Multi-Edit mode
- It would improve the multi-edit mode if values for each field could be set using an expression (as they can when edit...
-
05:06 PM Bug report #21528 (Closed): PostGIS 3D Lines Load as 2D
- Problem was with geometry columns in PostGIS, not the QGIS rendering. Was able to view 3D geometries in QGIS by tweak...
-
- Just discovered that this does not happen when I have a 3D line geometry in a PostGIS table, only when I create the 3...
-
- Philipp Lehner wrote:
> One of my customers reported the same issue with lines. Here everything works, also with pol... -
08:08 AM Bug report #21326: [GPS Panel Information] Don't allow to draw polygon with GPS with Add Polygon
- One of my customers reported the same issue with lines. Here everything works, also with polygons (tested with QGIS 3...
-
- works here on 3.4.5/windows.
Could you post the full log? Also try a new/clean profile.
-
- Alessandro Pasotti wrote:
> Yes: they are stored in the project XML, unless of course you store the project inside a... -
- Yes: they are stored in the project XML, unless of course you store the project inside a geopackage, in that case the...
-
- aren't such metadata written at a project level (and not really in the datasource)?
-
11:26 AM Bug report #17220: Metadata for a geopackage layer are not saved
- Hi,
Just installed QGIS 3.6
The issue is still valid: metadata cannot be written to a layer in a geopackage -
- Hi, this platform is dedicated to report bugs and feature requests, for help use the qgis users mailing list, or the ...
-
- Hi, this platform is dedicated to report bugs and feature requests, for help use the qgis users mailing list, or the ...
-
- In 3.6 I think I see even another wrong behavour: when I load the style you linked then on the map is applied correc...
-
-
-
-
- Andy Gio wrote:
> Thanks for your reply. You're right.
> Therefore I think that also when 'use estimated table para... -
10:45 AM Bug report #21556: Bbox processing error with MSSQL
- Thanks for your reply. You're right.
Therefore I think that also when 'use estimated table parameters' is checked,
... -
- this is problem in MDAL, see https://github.com/lutraconsulting/MDAL/issues/104
-
10:01 AM Bug report #21625 (Open): Scalebar display is wrong when working with different geographic coordi...
- Hello,
working with latlong coordinates, I've noticed that scalebar display of QGIS (3.6.0) is wrong when changing... -
- When using variables and expressions in a layout in order to position and size items (e.g. @layout_pagewidth and @lay...
-
- Here is some screenshots with current master
!scr_rqst.png!
!scr_table.png!
!scr_form.png!
Does it loo... -
- Here is some screenshots with current master
!scr_rqst.png!
!scr_table.png!
!scr_form.png!
Does it loo... -
- Here is some screenshots with current master
!scr_rqst.png!
!scr_table.png!
!scr_form.png!
Does it loo... -
07:44 AM Bug report #21623 (Open): Error while importing h5py in python console
Below is error message:
Traceback (most recent call last):
File "C:\PROGRA~1\QGIS3~1.6\apps\Python37\lib\code.p...-
- On Windows 7 64 bit with QGIS LTR 3.4.5-1 (89ee6f6e23) and QGIS master 3.7.0-10 (1205fbfa71), a ghost blinking window...
-
- In 3.4 branch, the bug firstly appeared on Windows in QGIS 3.4.4-2 (73c31df831), while it was not present in QGIS 3.4...
2019-03-19
-
- Applied in changeset commit:qgis|a963eaad54b40c3888a1bc263fd635db210b0dcb.
-
- Applied in changeset commit:qgis|a963eaad54b40c3888a1bc263fd635db210b0dcb.
-
- h2. User Feedback
QGIS Crashed when i closed the project. I had made updates and also put new profiles with no plu... -
08:25 PM Bug report #21620 (Closed): SAGA algorithms trying to execute the wrong command text?
- Have been having an issue since early QGIS 3 with all SAGA functions failing consistently. Best answer on StackOverfl...
-
- After running Check Geometries on QGIS 3.6, even by selecting a single vector layer or some of it's features, QGIS is...
-
- A test vector layer with 5 points, exported in some file formats.
For example, the geojson file contains:... -
- A test vector layer with 5 points, exported in some file formats.
For example, the geojson file contains:... -
- A test vector layer with 5 points, exported in some file formats.
For example, the geojson file contains:... -
- A test vector layer with 5 points, exported in some file formats.
For example, the geojson file contains:... -
- This issue is still valid... Can someone reopen it please?
I attach a project created with Qgis 3.0.7 (it has one la... -
- This issue is still valid... Can someone reopen it please?
I attach a project created with Qgis 3.0.7 (it has one la... -
- Applied in changeset commit:qgis|5bc2183d248b4160c9d29445d57eb040c763c828.
-
- Applied in changeset commit:qgis|5bc2183d248b4160c9d29445d57eb040c763c828.
-
-
03:28 PM Bug report #21617: Vector styling: Data Defined Override "Assistant" and expression editor do not...
- Sorry, make that https://github.com/qgis/QGIS/pull/9562
-
- > The fix is easy - I will do a pull request.
See [[https://github.com/qgis/QGIS/pull/9561]] -
- 0. Load a polygon layer and under layer styling click on the "Simple fill". Click the "data defined override" button...
-
- When I export a vector POLYLINE with the "Save vector Layer as..." at KML Format, the process work also the symbology...
-
02:36 PM Bug report #21616 (Open): CRS not written to file
- With QGIS 3.4.2 and 3.6.0, but not with 3.2.3:
When writing a vector layer to file, the CRS is not written, dependin... -
02:07 PM Bug report #21615 (Closed): refactorfields algorithm fails for field names that start with a digit
- If a vector layer has field names starting with digits (i.e. "1_field") the algorithm 'refactorfields' throws an exce...
-
12:57 PM Bug report #21614 (Closed): Composer of impression
- Hi!
When I want to add a new map I get the "Representing map" sign.
Thanks for the help! -
-
- Thanks!
-
- Thanks!
-
- This is implemented in 3.8 via the ability to force a DPI for the tiles
-
- This is implemented in 3.8 via the ability to force a DPI for the tiles
-
- The query you quoted is used "use estimated table parameters" option is enabled in the connection ui - otherwise the ...
-
- The query you quoted is used "use estimated table parameters" option is enabled in the connection ui - otherwise the ...
-
- Can anyone tell me something about this?
-
- Thanks for taking the time to respond. It is clear that it would be a lot of rework for little return to make this en...
2019-03-18
-
- Applied in changeset commit:qgis|d1910f59ddc14d1724c08191a1822237ace17c2c.
-
- Applied in changeset commit:qgis|d1910f59ddc14d1724c08191a1822237ace17c2c.
-
- Julien Cabieces wrote:
> Applied in changeset commit:qgis|0753b144b92763b18021f1d706a1cf184323b1aa.
When will thi...
Also available in: Atom