Activity
From 2015-01-27 to 2015-02-25
2015-02-25
-
10:57 PM Bug report #12271 (Closed): The output page size when printing to device does not match Composer ...
- This seems to be a similar issue to that reported in #11112
I haven't checked if this occurs in later versions than Q... -
09:51 PM Bug report #12257: Cannot create virtual field with delimited text layer
- Note: The issue comes from the logic used to identify when the calculator should create a virtual field. In this cas...
-
09:05 PM Feature request #12270 (Closed): List Unique Values based on selection
- Having the ability to return a list of unique values based on a feature selection. Currently ftools does not provide...
-
06:10 PM Bug report #12262 (Closed): New measuring dialog: "unknown" units when using localized qgis
- Fixed in changeset commit:"919b8b6183e3d0ec6df160f040cfaeb5d2964b87".
-
02:21 AM Bug report #12262 (Open): New measuring dialog: "unknown" units when using localized qgis
-
- It is an issue with translations, does not happen with QGIS in EN.
-
- fixed in commit:f213254 and commit:97ace3c
-
- fixed in commit:f213254 and commit:97ace3c
-
07:40 AM Bug report #12246: QGIS update error
- I'm raising the priority because QGIS Master is currently the only option for avoiding #12233
-
- I'm getting a different error message:...
-
11:53 AM Feature request #12232: support wfs 2 connections from metasearch
- FYI I raised this in WFS 2.0 Client issues at #12269
-
- Hi Paul: AFAIK the WFS2 client needs to advertise a signal that MetaSearch can connect to thus opening the WFS2 dialo...
-
11:07 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...
- Attached a sample testproject. It was created by QGIS <2.6. and last saved in QGIS 2.9
The wms url for the WMS-conec... -
- Fixed in changeset commit:"f4b3ad033aebcb4788d517a082e8bfbef83341f1".
-
07:58 AM Bug report #11465: pyqtconfig deprecated => sip: Unable to find file "QtCore/QtCoremod.sip"
- Donovan Cameron wrote:
> Is this a duplicate of the bug I posted at #10596 ?
Seems so, still this one contains a wor... -
- Fixed in changeset commit:"f4b3ad033aebcb4788d517a082e8bfbef83341f1".
-
09:57 AM Bug report #12242 (Closed): Zoom out
- Fixed in changeset commit:"d55de83bc4966665a5bec6325ad0f27d7f4a1ab8".
-
04:00 AM Bug report #12242 (Reopened): Zoom out
- I've filed #12265 for the test side of this.
The fix should be backported to the 2.8 branch. Having a test there woul... -
- Fixed in changeset commit:"935f46080b978533c3c9967e7d3b243be19fad27".
-
07:59 AM Bug report #12245 (Closed): iface.mapCanvas().refreshMap() segfaults QGIS
- refreshMap() is private because it is not meant to be used from outside... It deliberately crashes on an assertion co...
-
- refreshMap() is private because it is not meant to be used from outside... It deliberately crashes on an assertion co...
-
07:22 AM Bug report #12267: Data-defined SVG symbol path doesn't work in legend and symbol settings
- Sorry for bad title, should be of course "Data-defined SVG symbol path doesn't work in legend and symbol settings"
-
- I've tried to use data-defined SVG paths in symbol settings using both virtual field and expression. It works properl...
-
06:53 AM Bug report #12268 (Closed): Oracle : attributes right padded with white characters.
- Aloha,
I loaded geospatial view from Oracle (11g) in QGis 2.4.
When I query on attributes, string like attributes a... -
05:23 AM Bug report #12254: MSSQL 2008 SRID not recognized
- Yes - I can confirm that this problem exists in QGIS 2.8.0 Wien. This problem exists if the data is also read from MS...
-
05:19 AM Bug report #12266 (Closed): Spatialite connection not correctly freed
- The spatialite connection pool mechanism seems too conservative.
It fails with the following scenario :
* load a ve... -
- The class behavior is not fully tested. A single test for a very specific case is available a the time of writing in
... -
- Fixed in changeset commit:"ee68332ed76a0255f017d8070654154cfa20c1ec".
-
-
02:41 AM Bug report #7643: Empty console Output on R, under SEXTANTE
- Hello,
thanks a lot. I installed QGIS 2.8 via OSgeo4W and now it works. I get the "R console output". So far I can s... -
02:47 AM Bug report #12264 (Closed): Heatmap generated TIF with bad CRS
- Heatmap generated with plugin placed in the center of used coordinate reference system, instead of actual location. I...
-
02:12 AM Feature request #12263 (Closed): Open symbol properties by clicking on symbol in layer tree
- With QGIS 2.8 nested rules look great in layer tree.
I wonder if it is possible to bring up symbol definition window... -
- duplicate of #12233
2015-02-24
-
12:47 AM Bug report #12262: New measuring dialog: "unknown" units when using localized qgis
- See attached file.
-
- cannot confirm here, also with layers in 3003.
-
- I load an EPSG:3003 layer, the I activate the measurement tool. The measurement unit is shown as <unknown>, whereas i...
-
12:43 AM Bug report #12260 (Closed): Print Composer: Text field is not updated when chaning font
-
- Already fixed. Will be in 2.8.1
-
- I see and confirm. Is a regression.
-
- I see and confirm. Is a regression.
-
- I see and confirm. Is a regression.
-
- I see and confirm. Is a regression.
-
12:31 AM Bug report #12260: Print Composer: Text field is not updated when chaning font
- Giovanni Manghi wrote:
> Does it works as expected if the project/layout is made directly as a qgis 2.8 project?
No,... -
- Does it works as expected if the project/layout is made directly as a qgis 2.8 project?
-
- Does it works as expected if the project/layout is made directly as a qgis 2.8 project?
-
- Does it works as expected if the project/layout is made directly as a qgis 2.8 project?
-
- In an existing project (saved with 2.6.1), font of a text field in a print composer could not be changed.
-
- Confirmed. PR https://github.com/qgis/QGIS/pull/1927 fixes it, needs an automated testcase to ensure no more future r...
-
- Even over other applications. When clicking on Help, the help window stays in the background.
-
- The window for the creation of new memory layers appears wrong: it can be resized to zero width and reduced to only w...
-
- It would be useful to let the user adding fields also to temporary memory layers, in analogy to others. In this case,...
-
- See also https://github.com/qgis/QGIS/pull/1925
-
- Better disable it by deafult, and let the user reenable it if add the Python logic.
-
- When trying to add a field to a delimited text layer the Field Calculator UI does not enable the Output field type, w...
-
- There may be some good suggestion here, like the one to allow join tables not loaded as "layers", but there are a cou...
-
- There may be some good suggestion here, like the one to allow join tables not loaded as "layers", but there are a cou...
-
- There may be some good suggestion here, like the one to allow join tables not loaded as "layers", but there are a cou...
-
06:23 AM Feature request #12251 (Feedback): ArcGIS Joins (spreadsheets, tables, etc.)
- I would like to request to have a method of performing joins similar to ArcGIS. The attached image shows the ArcGIS J...
-
02:27 PM Bug report #12253: WMTS When Zoomed Out Crashes QGIS
- Right I'd describe it as a regression
-
- Calvin Metcalf wrote:
> Note that this is not the case in version 2.0.1 as the default behavior would be to zoom to t... -
- Calvin Metcalf wrote:
> Note that this is not the case in version 2.0.1 as the default behavior would be to zoom to t... -
- after some more testing, qgis does not respect the WGS84BoundingBox or TileMatrixLimits limit of a layer and will gl...
-
- Note that this is not the case in version 2.0.1 as the default behavior would be to zoom to the minimum zoom
edit: 2... -
- If you add a wmts layer that has a minimum zoom level (aka max scale aka the most zoomed out you can be) and you add ...
-
- This was certainly working in previous qgis releases, like 2.0.1
-
- This was certainly working in previous qgis releases, like 2.0.1
-
01:23 PM Bug report #12057 (Reopened): Computed area is wrong when reprojection is active
- Sorry, I don't have a master version to test against and using 2.8.0 on linux, but when OTF is turned on, the derived...
-
- Sorry, I don't have a master version to test against and using 2.8.0 on linux, but when OTF is turned on, the derived...
-
- Cannot confirm. I'm on Ubuntu 14.04, with the Ubuntugis repo, and both QGIS 2.8 and SAGA installed from it. It all wo...
-
- I installed version 2.8.0 from http://qgis.org/debian on Sunday, 22 February 2015. I opened up the SEXTANTE Processin...
-
- Franziska Beau wrote:
> Hello,
>
> I'm having the open described problems with R-processing in QGIS. And I didn't fi... -
- This bug should be fixed in QGIS 2.8. Can you please check?
-
- Hello,
I'm having the open described problems with R-processing in QGIS. And I didn't find any solution in the Inter... -
- How about the latest qgis release (2.8)?
-
- How about the latest qgis release (2.8)?
-
- How about the latest qgis release (2.8)?
-
- How about the latest qgis release (2.8)?
-
- When connecting with QGIS 2.6 to MS SQL Server 2008, the SRID is not recognised and the projection has to be manually...
-
- Spencer Gardner wrote:
> It might help to give some more specific guidance on your needs. As far as I know, QGIS has ... -
- Spencer Gardner wrote:
> It might help to give some more specific guidance on your needs. As far as I know, QGIS has ... -
- Spencer Gardner wrote:
> It might help to give some more specific guidance on your needs. As far as I know, QGIS has ... -
11:20 AM Feature request #12249: Editor Toolbar similar to ArcGIS
- It might help to give some more specific guidance on your needs. As far as I know, QGIS has all of the functionality ...
-
- I would like to see an Editor Toolbar similar to what ArcGIS 10.x has. Please see the Web page below for more informa...
-
- was ok on 2.6.1
-
- was ok on 2.6.1
-
- was ok on 2.6.1
-
- Correct - WFS. Sorry for the typo.
WFS worked well for me in previous releases but I hadn't tried this particular WF... -
- Is the ticket about wfs, not wms, right?
I confirm the crash with this particular service, but not others.
Did it w... -
- Is the ticket about wfs, not wms, right?
I confirm the crash with this particular service, but not others.
Did it w... -
- Is the ticket about wfs, not wms, right?
I confirm the crash with this particular service, but not others.
Did it w... -
- Is the ticket about wfs, not wms, right?
I confirm the crash with this particular service, but not others.
Did it w... -
- When I remove a WFS layer from the table of contents the application crashes. I'm using Windows 7. This occurs on the...
-
-
11:42 AM Feature request #12255: wms vendor parameters
- That did the trick. It's not obvious to check that box. Maybe another version beyond 2.6.1 could have a better desc...
-
- Did you check "Ignore GetMap/GetTile URI reported in capabilities"? Otherwise QGIS used the URIs from GetCapabilitie...
-
- Currently when adding a WMS layer to a map no vendor parameters are passed along to the WMS server, however they are ...
-
- Fixed in changeset commit:"cf1c30d7c7402310d7c6e40ffa163b29721001a0".
-
05:22 AM Bug report #12248 (Closed): QgsAttributeDialog.attributeForm() missing python binding
- The QgsAttributeDialog python binding is missing method attributeForm()
-
08:19 AM Bug report #12246: QGIS update error
- Confirmed on ubuntu-utopic as well. 2.9.0+git20150224+4629205+21utopic
-
06:01 AM Bug report #12246: QGIS update error
- I can confirm that, using debian nightlies
1:2.9.0+git20150224+4629205+20trusty -
02:21 AM Bug report #12246 (Closed): QGIS update error
- Try to update testing QGIS based on dependencies from ubuntugis and get the following error:...
-
- In an answer to a question posted (http://gis.stackexchange.com/questions/75320/is-it-possible-to-create-and-run-cust...
-
05:06 AM Feature request #12232: support wfs 2 connections from metasearch
- Hi Tom, thanks for looking at this, the record I gave as an example may actually support WFS 1
please check it with t... -
03:34 AM Bug report #11836: "Drag and drop designer" crashes QGIS when a text edit, multiline field is rep...
- The problem persists on 2.8.0 version
-
02:58 AM Feature request #12247 (Open): pause, and rerun button for GPS tracking and deported tracks
- Hi,
it could be useful to have possibility to stop Gps tracks and restart the same track later. The possibility to de... -
01:00 AM Bug report #12245 (Closed): iface.mapCanvas().refreshMap() segfaults QGIS
- Needed to refresh my mapcanvas for a plugin, and refresh() did not do the job, so I found refreshMap()...
That just ...
2015-02-23
-
- duplicate of #12241
-
- duplicate of #12241
-
12:25 AM Bug report #12244 (Closed): WMTS does not load Tiles/Map (QGIS 2.8 Ubuntu)
- Update to 2.8 (Ubuntu 14.04) - WMTS Service http://www.basemap.at/ does not load map-tiles anymore. GetCapabilities U...
-
08:46 PM Bug report #12243 (Closed): QgsNetworkAccessManager time out error
- When using QgsNetworkAccessManager.createRequest() to initiate a download I find that despite completing successfully...
-
- Fixed in changeset commit:"251aca6dca10171be67cac245e8b37553304f042".
-
- Confirmed, works ok on 2.6.1, does not on 2.8 and master.
-
- Confirmed, works ok on 2.6.1, does not on 2.8 and master.
-
- Confirmed, works ok on 2.6.1, does not on 2.8 and master.
-
- Confirmed, works ok on 2.6.1, does not on 2.8 and master.
-
- Confirmed, works ok on 2.6.1, does not on 2.8 and master.
-
01:16 PM Bug report #12241 (Closed): WMTS and 2.8
- In 2.6 and 2.7 (master) I could add this tile service using the WMS/WMTS icon: http://services.arcgisonline.com/arcgi...
-
> So, do you think we should hide this option in Raster Tile Index interface?
yes, because anyway as it is impleme...-
- Anita Graser wrote:
> As far as I know, the priority influences the label priority. This means that layers with highe... -
- duplicate of #11809
-
-
- not sure I understand, the second issue is a regression/change of behavior from a previous qgis release?
-
- Confirmed, was ok on 2.6.1.
-
- Confirmed, was ok on 2.6.1.
-
- Confirmed, was ok on 2.6.1.
-
- Confirmed, was ok on 2.6.1.
-
- Confirmed, was ok on 2.6.1.
-
02:45 PM Bug report #12242 (Closed): Zoom out
- The zoom out feature zooms in when clicking and dragging over a feature. A single click zooms out as expected.
-
- Fixed in changeset commit:"06e2186d0f28422da4c3dfc8176248ab4a459d78".
-
- I can confim it on both Linux and Windows, the raster calc does nothing after pressing "ok".
-
- I can confim it on both Linux and Windows, the raster calc does nothing after pressing "ok".
-
11:21 AM Bug report #3789: Please update license file
- discussed a lot of times - new parts are GP3+ but I guess there are still parts with GPL2 - and without allowance of ...
-
10:01 AM Feature request #12240 (Open): Advanced Digitizing - finishing up tool
- The new advanced digitizing panel (CAD tools) is great. To make it even better I'd like a function to finish an objec...
-
- Hi Paul: how can I reproduce this?
- open QGIS 2.8.0
- open MetaSearch
- in search tab, select CSW "Nationaal Georeg... -
08:13 AM Bug report #12230: Problem with spatial index detection on oracle spatial views
- hello jürgen,
thank you for the quick fixing. it works. :-)
2015-02-22
-
12:49 AM Bug report #12133: Attempting to preview PostGIS external rasters crashes QGIS
- I confirm out-db PostGIS raster are not supported yet in GDAL. After the fix in GDAL trunk (http://trac.osgeo.org/gda...
-
12:44 AM Bug report #12238 (Closed): raster calculator broken in QGIS 2.8/master
- I've just installed QGIS 2.8 and noticed that the raster calculator writes any files on Ubuntu 12.04. The formula you...
-
- duplicate of #12233
-
- I think it was fixed right away so there was never a ticket made for it. Don't worry this can be the reference for an...
-
09:07 PM Bug report #12237 (Closed): Cannot change font in print composer
- Great! Thanks for the quick response.
I looked back through the bug reports before I submitted this, but obviously no... -
- Yeah this is a known issue with this release. It has already been patched and hopefully new packages will be out soon.
-
- After adding a legend, text field, or scalebar in print composer, I am unable to change the font family, size, style,...
-
03:46 PM Bug report #12203: Cannot double-click to rename groups
- Mistakenly named, meant two consecutive clicks. Layers are easily renamed with this.
-
12:42 PM Bug report #12236: Snapping options
- Platform: Windows 7
-
- Hello,
two problems with snapping options in QGIS 2.8:
1. mode Advanced is enabled by default. But Advanced mode is ... -
09:08 AM Bug report #12146: Join tables are not shown in form defined by Drag and drop designer
- Well, I have checked it again on QGIS 2.8 and 2.9.0 master and I still get the same bug. I don't know if there is som...
2015-02-21
-
- Duplicate of #9546
-
- Duplicate of #9546
-
- Loading the WMS layer from a 2.6.1 project or directly in master works fine for me. The legend @GetLegendGraphics@ ...
-
- Loading WMS Layer (contains sub-Layers, see atttached jpg --->Nr. 5) p.e. from
http://www.gis-schweich.de/service_sc... -
04:17 PM Feature request #12157: Add "Select by Location" button to Attributes toolbar
- Might make sense to have a "Selection" toolbar. Seems odd to have these tools in a toolbar called "Attributes".
-
- I think this is due to #11809
-
- I can confirm this issue with the square symbol. Maybe try the diamond shape as a workaround.
-
- Fixed in changeset commit:"fe21378416184ceeb0d48802c01e26939f3d5167".
-
- Anita Graser wrote:
> Maybe this recent change caused it commit:69c58e9eece
which reverts commit:6ba79ca :( -
- Maybe this recent change caused it commit:69c58e9eece
-
- Affects both the font picker for legends as well as for label items. (Colors which can be selected separately do work...
-
- Double-clicking on a layer opens its properties. Which legend items can be renamed on double-click?
-
- Double-clicking on a layer opens its properties. Which legend items can be renamed on double-click?
-
- As far as I know, the priority influences the label priority. This means that layers with higher priority will be pre...
-
- With current master, only PyQgsPalLabelingServer fails for me. Do I have to enable anything for it to pass ?
-
- This was probably fixed by commit:cafeaa689696bc4811955f6b14811116dcaea0d2
-
- This was probably fixed by commit:cafeaa689696bc4811955f6b14811116dcaea0d2
-
- should this be closed or is there any real plan to switch to GPL3+ ?
-
04:45 AM Bug report #11428: Remove the option "Write absolute path" from gdal tileindex tool
- Now I see that this isn't a QGIS problem, because it also happens at the command line.
If I put the command line in ... -
02:40 AM Feature request #8495 (Closed): lat-long graticule on projected map
- This was implemented in 2.6
2015-02-20
-
- Fixed in changeset commit:"582d009f434260bb0efd9c0914c7f854f856a647".
-
- hello,
qgis don't detect the spatial index for spatial query in Oracle. I do not know if there is a fault in qgis or ... -
-
10:27 AM Bug report #11891: crash dump on exit - win32
- This seem to be gone with release of 2.8.0 and GDAL update. I just installed OsGeo4W and after
I re-installed Garmin ... -
- This seem to be gone with release of 2.8.0 and GDAL update. I just installed OsGeo4W and after
I re-installed Garmin ... -
11:51 AM Feature request #12232 (Closed): support wfs 2 connections from metasearch
- Would it be possible that metasearh detects if the wfs 2 plugin has been installed, and if so use that to add wfs 2 s...
2015-02-19
-
- Fixed in changeset commit:"c69f1533274fd395ddb7b446cfbef53dcb16249a".
-
- Fixed in changeset commit:"c3d9f10cbe10dafb928d5e6416af832c94c9fc37".
-
- Fixed in changeset commit:"5eba57558d065b1f43a736d563e72277bad06b24".
-
- Fixed in changeset commit:"c9682e550b7d34e28c75fa04d843d33902234ad3".
-
- I'm not 100% sure but judging it's not supported from:
- GDAL ticket: http://trac.osgeo.org/gdal/ticket/3234
- GDAL ... -
- Yes, I mean imported through the -R option.
Are you sure GDAL does not support them? -
- Do you mean that external raster == stored out of DB?
Could you please check the backtrace - the crash may be inside... -
-
- In 2.x API in QgsVectorJoinInfo class there are no "joinField" and "targetField" members anymore. Use "joinFieldName"...
-
- In 2.x API in QgsVectorJoinInfo class there are no "joinField" and "targetField" members anymore. Use "joinFieldName"...
-
- BTW @thread apply all bt@ in @gdb@ produces backtraces for all threads.
-
- Martin Dobias wrote:
> What about the worker threads - what were they waiting for?
Good question :)... -
- What about the worker threads - what were they waiting for?
-
- I was testing a project I have and qgis (master) froze.
strace shows it hanging in: @futex(0x45b791c, FUTEX_WAIT_PRIV... -
-
03:58 AM Bug report #12229 (Closed): python/plugins/processing/algs/qgis/ConcaveHull.py - throws error in ...
- Dear maintainer
Plugin: QGis geoalgorithms - Vector geometry tools - ConcaveHull
Issue: GUI works completly fine, us... -
- This may have been fixed with commit:b48e7fd3 - could you please test again?
-
03:00 AM Bug report #12221: Transparency of layer change the size of the legend symboles
- Ok ! Nice ! I forget to check in the 2.6 version...
-
- Oh I see - your bug report was for version 2.4. This is fixed now in master (most likely already fixed in 2.6 with le...
-
- Oh I see - your bug report was for version 2.4. This is fixed now in master (most likely already fixed in 2.6 with le...
-
- I cannot replicate - or maybe I just do something else than you do. Could you please post steps to reproduce and the ...
-
02:07 AM Bug report #12227 (Closed): QGis Server - WFS - GeoJSON and escaping backslash
- I had a shapefile I made available as a WFS-service with QGis Server.
OpenLayers 3 kept giving me an error. Turns ou...
2015-02-18
-
- Fixed in changeset commit:"ad86ffe18a85431fa16a6357457c0a081aa6a99b".
-
07:52 PM Bug report #12226 (Closed): Tool description vanishes when exchange the default theme
- When I trying to exchange any theme in QGIS Master on Ubuntu 14.04 (Windows, Cleanlooks, Plastique...) all tooltips i...
-
- The 2.7 dxf is empty (no entities), but loads w/o errors in AutoCAD.
-
- The 2.7 dxf is empty (no entities), but loads w/o errors in AutoCAD.
-
- The DXF export from QGIS Master 2.7 is not readable. With QGIS 2.6 is the result of the same record properly.
Below i... -
04:05 PM Bug report #12225 (Closed): symbology size scale field problem in spatialite layer
- When trying to set the size scale for scale a point layer based on a count field in a spatialite layer the count fiel...
-
- should be fixed in commit:39d3765
-
- should be fixed in commit:39d3765
-
- I have checked it on QGIS 2.7.0-100 master (OSGeo4W) or on Ubuntu 12.04 and I have the same problem.
For two layers (... -
- I have checked it on QGIS 2.7.0-100 master (OSGeo4W) or on Ubuntu 12.04 and I have the same problem.
For two layers (... -
- I have checked it on QGIS 2.7.0-100 master (OSGeo4W) or on Ubuntu 12.04 and I have the same problem.
For two layers (... -
- I have checked it on QGIS 2.7.0-100 master (OSGeo4W) or on Ubuntu 12.04 and I have the same problem.
For two layers (... -
- I have checked it on QGIS 2.7.0-100 master (OSGeo4W) or on Ubuntu 12.04 and I have the same problem.
For two layers (... -
07:30 AM Bug report #12224 (Closed): Customization Menu - Reset button doesnt reset
- After disabling certain menu's or features in the customization Menu, clicking the reset button does not bring the li...
-
- New Description:
When in Processing the user chooses to save the output not in a temporary file, then is presented w... -
- Hello,
When applying a transparency to an entire layer in the layer properties, the symboles of the svg legends are ... -
02:07 AM Bug report #12220 (Closed): Document better the "priority" functionality for labels
- Under Labelling -> Placement, there's a "priority" bar which ranges from "low" to "high". I'm just guessing here, but...
-
- Labelling, placement.
When using "Offset from point", changing the "quadrant" (anchor) makes only a negligible differ...
2015-02-17
-
- Fixed in changeset commit:"d8083b96ef3eb8761684036e794b97981124c51f".
-
- Fixed in changeset commit:"f301cb8001d028d412352dd3808fc5a4e3914862".
-
- Fixed in changeset commit:"1c3472ab2b3e1e116c4ee0fbfebaf1165b4dcfbf".
-
10:10 AM Bug report #12105: QGIS-master: undeclared identifier 'lastUsedFilter'
- As described above, I have problems in building qgis master on FreeBSD since git hash 1e936df. Reintroducing a one li...
-
- Martin Dobias wrote:
> Giovanni, could you please attach the project to see if I can replicate the problem?
Hi Marti... -
- Martin Dobias wrote:
> Giovanni, could you please attach the project to see if I can replicate the problem?
Hi Marti... -
-
- Giovanni, could you please attach the project to see if I can replicate the problem?
-
- ...
-
06:42 AM Bug report #12217: Labels with data-defined rotation and offset from point are misplaced
- Oh one more thing. It uses placements with *Offset from point* taken from the attribute table. When using *Around poi...
-
- I'm trying to place some labels using an attribute field showing the rotation in degrees and the actuall rotation wor...
-
- Fixed in changeset commit:"70a0a6e3afa3c789866491b5e9ce71a22a874af8".
-
- Mathieu Pellerin - nIRV wrote:
> That said, this does raise a problem that needs addressing by processing. If I choos... -
- Fixed in changeset commit:"f64730e8d196e40bfecd8bea67ae64b69fba0cb3".
-
03:22 AM Bug report #12206: processing: apply a difference geoalgorithm using two memory layers not workin...
- Ie, right now, processing assumes that a source uri is unique to a layer name, which is wrong. The code should handle...
-
- Jef, right, that might be it (why it never affected me before is pure mystery). I'll double check with a QGIS 2.6 bui...
-
- Is it a regression? Your memory layers probably have the same data source uri (@polygon?crs=EPSG:SOMECRS@), that's ...
-
- Fixed in changeset commit:"255cbd2c2a5d4836b02765ace9050856649216b1".
-
04:29 AM Bug report #12125: Very poor performance with complex projects (saving, adding/removing layers)
- QGIS Master 'ca86be7' (15/2/2015) still shows this behaviour.
If it can help: the composers are not specially comple... -
- Fixed in changeset commit:"ffd7f8a85d12dfcbcbadfb6c3658ad7afa521b8d".
-
- Couldn't reproduce a crash on start, but this Python code will lead to the same crash:...
-
03:08 AM Bug report #12212: Multiparts to singleparts fails with one-vertex lines
- Geom does not allow such shapes; the vector -> check geometry validity tool does indeed report such single-vertex "li...
-
- Fixed in changeset commit:"8eab61d9a0a81db191f6309239564355396af69a".
-
01:18 AM Bug report #12209: Problem Snapping to segments in PostGIS
- I have tested with the master version and the error is the same.
2015-02-16
-
- Fixed in upstream (both GDAL trunk and 1.11 branch)
-
- Fixed in upstream (both GDAL trunk and 1.11 branch)
-
10:50 PM Bug report #12216 (Closed): No write permission when saving a raster layer
- With the 'save as' function, an exception is raised when you try to save a vector layer if you don't have the write p...
-
- Some icons of Vector and Raster menus disappeared, namely:...
-
- Thanks Jurgen, it's fixed now.
-
- Fixed in changeset commit:"ceceebdf9ba5c118de63c218bec6a35ef178c515".
-
03:10 AM Bug report #12210 (Closed): QGIS Server: value relations with multiple values are not properly re...
- In case of a value relation widget there is the option to select multiple values. QGIS then stores them in a text col...
-
08:51 AM Bug report #12214: Clipped Feature Symbology
- For futher detail - the attach imaged has a green region, which is the info-tool selection. All yellow points are the...
-
- With an equidistant point array represented by square 'icons' that are all rotated to a specific degree - there is si...
-
-
07:44 AM Bug report #11983: pasting features into spatialite layer does not copy attibute values
- Oops, I had checked in QGIS 2.6.1!
I also checked it in 2.7 (commit:ca86be7) and can confirm the bug is not there any... -
- Saber Razmjooei wrote:
> It was from the same table.
> The problem seems to have been resolved in commit:e2a51df.
is... -
- It was from the same table.
The problem seems to have been resolved in commit:e2a51df.
-
- It is possible to construct lines containing just one vertex, by removing all vertices from a line except one.
Howev... -
04:18 AM Feature request #12211 (Open): Add support for margins for grid frames
- When creating a frame for a grid, it will be useful if the margin can be set.
The desired effect can be viewed in the... -
03:53 AM Bug report #11293: Auto update Shows All Layers
- Martin Dobias wrote:
> The second issue (with layer titles being visible with filtering enabled even if the layer is ... -
- Does this also apply to master?
-
- Working with snapping in 2.6.1. release, we have found a problem with a Postgres/PostGIS layer, when we try to snap a...
2015-02-15
-
- I can't reproduce the problem anymore.
Closing it now. -
- Fixed in changeset commit:"d9a1654501b6b1a0375e4f5a1ac85140d9b62490".
-
09:41 AM Bug report #12145 (Closed): Master does not compile with Qt5 libraries
- Yes, you will need to build against a QWT library compiled and linked against Qt5.
I think QWT 5 does not build agai... -
- Duplicate to #12207
-
- In the style settings it's possible to right-click and select "copy" and "paste".
This function doesn't seem to do a... -
- In the style settings it's possible to right-click and select "copy" and "paste".
This function doesn't seem to do a... -
- closing for the lack of feedback
-
- closing for the lack of feedback
-
- closing for the lack of feedback
-
- closing for the lack of feedback
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
- That the primary key columns are skipped and replaced with the defaults is a feature - otherwise there might be confl...
-
- Fixed in changeset commit:"e2e23f0c8efaf755b0a131cc4a69b4caa3a29c2d".
-
- implemented in commit:b2cfe0b330
-
- implemented in commit:b2cfe0b330
-
- implemented in commit:b2cfe0b330
-
- implemented in commit:b2cfe0b330
2015-02-14
-
- I believe that's a pretty recent regression. When using two memory layers to apply a difference geoalgorithm through ...
-
- related to #3865
-
- related to #10036
-
- related to #10036
-
- Markus Neteler - wrote:
> AFAIK you can define the name like through a variable:
>
> GISRC:
> name of .grassrc6 ... -
04:02 PM Bug report #5644: GRASS integration should use private, not user's .grassrc6 file
- AFAIK you can define the name like through a variable:
GISRC:
name of .grassrc6 file. Defines the system wide va... -
- Markus Neteler - wrote:
> Another report: "OSGeo Live !#1398":http://trac.osgeo.org/osgeo/ticket/1398 : QGIS's proces... -
- Another report: "OSGeo Live !#1398":http://trac.osgeo.org/osgeo/ticket/1398 : QGIS's processing (sextante) toolbox hi...
-
- Fixed in changeset commit:"86d08b6c39bad37e4c9b468f55c4c60981b60fa2".
-
- FYI: The GRASS GIS package itself offers a "demolocation" in LatLong which might be used here.
-
- FWIW: In GRASS GIS 7, i.fusion.brovey has been retired and replaced by the more powerful i.pansharpen (http://grass.o...
-
- FWIW: In GRASS GIS 7, r.los has been retired and replaced by the very fast r.viewshed. The flags and parameters are r...
-
- Unfortunately not reproducable. Please find a reproducable example and reopen.
-
- Unfortunately not reproducable. Please find a reproducable example and reopen.
-
- it this still an issue?
-
- I think that is a plugin bug. I filed this issue "processing_pttransform !#16":https://github.com/qgispt/processing_...
-
- I think that is a plugin bug. I filed this issue "processing_pttransform !#16":https://github.com/qgispt/processing_...
-
- Hi Jurgen,
I've confirmed that the conflict is with the plugin [0] [1], which is written in portuguese.
[0] https:... -
- which translation are you using?
-
- ...
2015-02-13
-
11:14 PM Bug report #11459: Editing Composer legend while filtered does not work
- Same issue in 2.6.1
When I edit a filtered version of the legend, is act as if it is unfiltered
Having a list with 4... -
- If you export a layer that is transparent or semi-transparent into SVG, it is turned into an image (ArcMap has the sa...
-
- For most items, if you double-click on their name, you can rename them. Groups do not allow this for some reason.
-
- When exporting out to SVG, each layer has a different bounding box. This makes it difficult to correctly align layers...
-
- Nathan Woodrow wrote:
> Nope I was wrong. The default settings are being set for me here.
Hi Nathan,
That is true on... -
- duplicated by #10684
-
- duplicated by #10684
-
- Are the attribute names identical? QGIS maps the source attributes by name to the destination layer and skips attrib...
-
- The bug still exists in master (commit:065d190).
Windows 7 64-bit
OSGeo4W installation -
- Already implemented in master
-
- Already implemented in master
-
- FYI - 2.8 allows you to control which annotations (lat/long) are shown on each of the map's sides, so that helps avoi...
-
- My apologies, this was supposed to be a feature request and not a bug report.
-
- Often when creating maps with grids, one wants the extent of the
map to align with graticules (or as close as possib... -
- fixed in commit:e96b204b
-
- fixed in commit:e96b204b
-
- fixed in commit:4a44956
-
- fixed in commit:4a44956
-
- fixed in commit:4a44956
-
- I think I fail to see the problem here...
There is nothing like indexes being owned by layer nodes. Indexes just mir... -
04:49 AM Feature request #12200 (Closed): Move layers within ToC using PyQGIS
- Based on a post on GIS StackExchange (http://gis.stackexchange.com/questions/134284/how-to-move-layers-in-qgis), it s...
-
- fixed in commit:32945058
-
- fixed in commit:32945058
-
- If it's fixed - we should close it.
-
- If it's fixed - we should close it.
-
04:27 AM Bug report #11837: FILTER parameter not working
- Hmm,
seems to be fixed, Filter is working as expected. Shall we close this ticket now? -
-
- For the configuration @QSettings@ is used. You can use the enviroment variable @QGIS_OPTION_PATH@ to set where your ...
-
- Fixed in changeset commit:"1e9774fdcf3fca2f9d1fa9165f874e7f450c34ff".
-
- Fixed in changeset commit:"1e9774fdcf3fca2f9d1fa9165f874e7f450c34ff".
-
- A style for the legend that looks as the attached scale bar. It is
the standard style for Southern African topographi... -
- Would like the following Grid Frame Style to be added to the style options,
it is the style that is used widely in So... -
02:49 AM Bug report #12197 (Closed): cannot delete old visibility preset
- I have some old presets I can't delete in a project.
When I select one, it is not ticked as current, hence I cannot d... -
- In order to create a map that covers the full extent of the page one has to to manually draw a box (during which snap...
2015-02-12
-
- A useful option would be to draw coordinates in DMS format with double digits.
So instead of printing "24°6" it would... -
- Martin Dobias wrote:
> Then it looks like a bug in GDAL library - I have reported it here: http://trac.osgeo.org/gdal... -
- Then it looks like a bug in GDAL library - I have reported it here: "GDAL !#5839":http://trac.osgeo.org/gdal/ticket/5...
-
08:59 AM Bug report #12075: Misreading value from a .grd file created with MapInfo (Vertical Mapper)
- Hello,
I don't know if you have seen the previous video, but i put another here:
*https://www.youtube.com/watch?v=Z... -
- Hello,
I don't know if you have seen the previous video, but i put another here:
*https://www.youtube.com/watch?v=Z... -
- Hello,
I don't know if you have seen the previous video, but i put another here:
*https://www.youtube.com/watch?v=Z... -
12:20 AM Bug report #11627: uncheck "case sensitive" in legend filter
- Hi, any news with this small feature request?
-
- Martin Dobias wrote:
> Hi Giovanni
>
> I have created a project with 10 empty composers - in debug version each comp... -
- Martin Dobias wrote:
> Hi Giovanni
>
> I have created a project with 10 empty composers - in debug version each comp... -
- Seb Radzimski wrote:
> Thanks Giovanni! I found this problem on Windows 7 and 8 but I will check that on Ubuntu as we... -
- Thanks Giovanni! I found this problem on Windows 7 and 8 but I will check that on Ubuntu as well. Please have a look ...
-
- Thanks Giovanni! I found this problem on Windows 7 and 8 but I will check that on Ubuntu as well. Please have a look ...
-
-
-
- Is this still the case?
-
11:51 PM Bug report #11889: Setting "use project CRS" in "settings -> options -> CRS > CRS for new layers"...
- Question on developer list raised (http://lists.osgeo.org/pipermail/qgis-developer/2015-January/036560.html), it seem...
-
- Nope I was wrong. The default settings are being set for me here.
-
- I can't confirm the having to change from Current Layer to Advanced. Just pressing OK is enough for me, but I can con...
-
- In QGIS Master, to enable snapping when opening a new QGIS project and load layers, you must:
1) Open the Snapping O... -
- fixed in commit:32945058
-
- fixed in commit:32945058
-
- Fixed in changeset commit:"3294505861afae594c4d19b9a876c10067c71944".
-
- Fixed in changeset commit:"065d190d8548a3eb4696b3c9ee4cc2db14cc8cac".
-
- appears to be fixed in master. The value updates in the table, detects that there are changes and saves, i.e. as expe...
-
- Fixed in changeset commit:"f540cd16a2118a16dae5f5a8642255b9d922679b".
-
- In DB Manager -> SQL Window, if you write a SQL query, run and then change some parameter, making the selection with ...
-
08:42 AM Bug report #11837: FILTER parameter not working
- Does this issue is linked to #12090?
Does the commit 27bf440eace80c4f56c0f191706dfe1b046bcc96, Server: fix loading of... -
- Does this issue is linked to #12090?
Does the commit 27bf440eace80c4f56c0f191706dfe1b046bcc96, Server: fix loading of... -
- Does this issue is linked to #12090?
Does the commit 27bf440eace80c4f56c0f191706dfe1b046bcc96, Server: fix loading of... -
- I was thinking along the same lines - to me preserving data integrity seems more important than having possibly tempo...
-
- Martin Dobias wrote:
> This must be the same problem with not doing REPACK after editing (#11007 and #10560), resulti... -
- Fixed in changeset commit:"3803979b2b95a83bc8f9bc2a449bfe80de8bb6ac".
-
- oops sorry Jurgen I fixed it in the meanwhile...
-
- Reproduce:
1. Enable split part map tool on a line layer
2. Enable snapping on the layer
3. Click on a vertex.
Crash... -
- Martin Dobias wrote:
> Thanks a lot Giovanni - I just took A_multipart + B for intersection from your data - and unfo... -
- Thanks a lot Giovanni - I just took A_multipart + B for intersection from your data - and unfortunately the intersect...
-
06:48 AM Feature request #12191 (Open): right to left option in legend
- I use RTL language.
Please add option for RTL legend in the print composer -
- The only issue I can confirm right now is that whenever layers are added/removed, the composers' maps will be re-cach...
-
04:50 AM Bug report #12125: Very poor performance with complex projects (saving, adding/removing layers)
- Hmm, the issue still exists with the latest master for me.
-
- Benoit de Cabissole wrote:
> Also did some testing. Kept all plugins active, loaded a copy of one project having many... -
06:12 AM Bug report #12116 (Closed): Print Composer: Physical print different sizes depending on "Print as...
-
- James Novak wrote:
> I haven't done much testing, but it may have been due to using an old (version 2.2) project file... -
03:55 AM Bug report #12185: cannot copy postgis layers between two schemas in the same db using qgis browser
- Hi,
The message is from the Browser. With the postgis database and both schemas open, I drag one layer to a differen... -
- what tool does return that message? DB Manager? The browser?
what is the "database administrator plugin"? -
- the attached file works ok on qgis master, in case of multiple inputs we should document the limitation when the sepa...
-
- the attached file works ok on qgis master, in case of multiple inputs we should document the limitation when the sepa...
-
> I tried gvSIG Desktop, but its WFS client doesn't seem to support services, which require username and password, s...
2015-02-11
-
- Martin Dobias wrote:
> Hi Giovanni
>
> even if first run singlepart -> multipart (instead of dissolve operation), I... -
- Hi Giovanni
even if first run singlepart -> multipart (instead of dissolve operation), I still get correct results.... -
- Evangelos Rozos wrote:
> Martin Dobias wrote:
> > Hmm seems to work fine for me. Could you also attach the results yo... -
06:06 AM Bug report #11986: Intersection returns the wrong result
- Martin Dobias wrote:
> Hmm seems to work fine for me. Could you also attach the results you get (B, BD) ?
>
> Which ... -
- Martin Dobias wrote:
> Hmm seems to work fine for me. Could you also attach the results you get (B, BD) ?
>
> Which ... -
- Hmm seems to work fine for me. Could you also attach the results you get (B, BD) ?
Which tools is actually the one c... -
- Hi,
Just tested again in english now and realised it's rather a problem of bad translation. In french, the translator... -
- Just tested with QGIS master and it says "x legend entries removed" as expected. I haven't seen the question being di...
-
- Select layers in TOC and click on any button that removes a layer from the project.
You get a message box "Remove x l... -
- Hi Giovanni
I have created a project with 10 empty composers - in debug version each composer add ~0.2s to the load ... -
- Thank you Jürgen,
tested today and works like a charm now. -
11:12 PM Bug report #12183 (Closed): Processing refactor fields: python error after trying to add a new field
- Fixed in changeset commit:"ed94aff17d2ddd65c98c5a67f2196da4fa45bbf6".
-
07:23 AM Bug report #12183: Processing refactor fields: python error after trying to add a new field
- After edit on field type, if none selected, set model data to QtCore.QVariant.Invalid which is correctly handled in m...
-
- Click "add a new field", set its "precision", "length" and "type"
Select this field and click "delete selected field... -
- Fixed in changeset commit:"3c938275ebbb5cde21c3a19f3bc804721c63f1ff".
-
- QgsExpressionWidget editor is not closed automatically like combo and line edit on run clicked.
Workaround by emmitin... -
- Consider the attached shapefile:
- Run refactor fields
- Add a new field and name it ("Sum" for example)
- Open th... -
- Also did some testing. Kept all plugins active, loaded a copy of one project having many composers, deleted all compo...
-
- Fixed in changeset commit:"b26556e55190fc45b5ca700827230682a661742e".
-
- Martin Dobias wrote:
> I cannot reproduce. Does it happen just sometimes?
>
> Will it happen if you disable simplifi... -
- Martin Dobias wrote:
> I cannot reproduce. Does it happen just sometimes?
>
> Will it happen if you disable simplifi... -
- I cannot reproduce. Does it happen just sometimes?
Will it happen if you disable simplification?
Will it happen if ... -
09:06 PM Bug report #12189 (Closed): Natural Earth projection is not accepted as custom CRS definition
- Natural Earth is a projection in proj.4:
http://trac.osgeo.org/proj/wiki/proj%3Dnatearth
The proj.4 string is... -
- Doh!
-
- Should the title be "label-only layers" not "label-only layers"?
-
- I agree this would be a handy thing to have. I have updated the ticket information. Nyall and I have talked about i...
-
- I agree this would be a handy thing to have. I have updated the ticket information. Nyall and I have talked about i...
-
- I agree this would be a handy thing to have. I have updated the ticket information. Nyall and I have talked about i...
- 08:38 PM Bug report #11993 (Closed): Node editing SQL server table causes crash
- Fixed in changeset commit:"b48e7fd3676f60f0822d4c2285cb677b27fbed1b".
-
02:05 AM Bug report #11993: Node editing SQL server table causes crash
- Hi Martin
Sorry I didn't get back to you yesterday, I was away from the office all afternoon. I've just created a ne... -
- Well spotted - thanks! Fixed in commit:53f534
-
01:08 AM Bug report #12154: Select by location does not work for feature completly within the selection fe...
- Thanks, it's now working perfectly but there is a typo on the word "intersect" in the fTools "Select by location" dia...
-
- Fixed in changeset commit:"059fd2c461b78bf9e5fe8c64e15fa7a957d1b592".
-
- Updates to the schema of shape files (by adding or deleting columns) is not propogated to all the other versions of t...
-
02:39 PM Feature request #12187: GeoPackage: Vector layer save as... support
- Sorry:
Title should be "GeoPackage: Vectorlayer save as... support".
And it's a feature request, not a bug. -
- OGR supports reading and writing of GeoPackage vector format.
QGIS supports GeoPackage reading/importing (besides Dra... -
- Fixed in changeset commit:"5397d6b41d2ba8221d356fcb71fed06dc907ca48".
-
- I'm getting a "relation already exists" error when trying to copy the table to a different schema in the same databas...
-
07:16 AM Bug report #9395: WFS layers time out, even though the timeout is not reached
- Giovanni Manghi wrote:
> Jacob Madsen wrote:
> > As far as I know, we encountered this issue back as early as version... -
- FieldsMapper use standard processing function "output.getVectorWriter" to create output storage, and give it selected...
-
- I haven't done much testing, but it may have been due to using an old (version 2.2) project file in 2.6. Creating a n...
-
03:47 AM Feature request #12184 (Closed): catch "Raise Warning" and "Raise Notice" messages from PostGIS
- QGIS can't catch "Raise Warning" and "Raise Notice" messages from PostGIS(while editing PostGIS-Layers) from a Postgr...
-
- Thanks, using Ctrl + drag up I can unselect lines. I was relatively sure it used to work like this, but I may be thin...
-
- I don't think it ever worked like that. If you hold Ctrl when dragging over cells it will unselect.
-
- I don't think it ever worked like that. If you hold Ctrl when dragging over cells it will unselect.
-
- Steps to reproduce:
- Select one line of the attributes table
- Drag the selection a few lines down
- Try dragging... -
- The map rotation in the print composer should be more intuitive. Currently, one can only set the rotation numerically...
-
- The map rotation should be more intuitive. Currently, one can only set the rotation with numerically in the status ba...
-
- This has been fixed in commit:84936e59 (processing) and commit:dc156c (ftools)
-
- This has been fixed in commit:84936e59 (processing) and commit:dc156c (ftools)
2015-02-10
-
- see also "commit discussion":#1eec3b9ecf647e10749091495061d2b6a41b67eb
-
- Fixed in changeset commit:"bbc7cba53f0052a03686d383419a8e6793063bdc".
-
- See #12174.
If $rownum does not return a meaningful value, it should not be included in the expression dialog for lab... -
- $rownum is only valid in the context of field calculator - in all other occurrences it will be zero. You can use $id ...
-
- $rownum is only valid in the context of field calculator - in all other occurrences it will be zero. You can use $id ...
-
- Using the variable $rownum returns a value of 0 for all rows when used for labeling purposes.
Steps to replicate:
Se... - 07:06 PM Bug report #12167 (Closed): Expression-selected labels doesn't deal with NULL
- Fixed in changeset commit:"a15aa74bb7e4b457b67624882413b72b2e862cd6".
-
- This seems to be related to the way the data defined values are handled....
-
- Attached a zip file with a test shp file and project
-
- I don't see that here. Can you attach a project with sample data please to test with.
-
- yes, exactly like that
-
- Fixed in changeset commit:"f046d3fca27d7681be08cb287aa0eff2eb70fcf1".
-
- Reopen if you find more. No point leaving a ticket open with no details.
-
- Because there may be other ways to cause the label engine to fail this way, so #12167 is (likely) just one method of ...
-
- The custom dash pattern UI is completely unclear and produces very odd results.
The problems:
1. Unclear what un... -
12:52 PM Feature request #12175 (Open): Using 'multi layered' TTF symbols
- Hello,
I try to work with the TTF font Cadastra downloadable from
http://www.cadastre.ch/internet/cadastre/fr/home/... -
- These are two separate parts of the same bug and both are needed. This bug allows easy access to the settings, the 12...
-
- Sorry, that was a suggested implementation to the problem of needing to have a symbology defined for labels to show.
-
- Fixed in changeset commit:"4938fe79e8a3fa5d7c03a40ba624c49712ad74bd".
-
- Fixed in changeset commit:"2073c03931c6ee6dedd6d1b87365686ab49386f4".
-
-
- If you find that ticket please link it here. It would be useful to do cleanups before 2.8 gets out.
-
- Ok - got it. It is probably a bug if it isn't working. But then I don't see a use-case why one wants to completely ro...
-
- I mean for markers you apply to lines. For example arrows at the first or last point of lines.
There seem to be an ad... -
- Do you mean for "marker lines"?
I don't know. I have not tried. I usually use the "auto" rotation of markers at a ma... -
- It looks like data-defined rotation does not work for symbols attached to _linear_ features. Can you confirm that ?
S... -
- Ready for test: https://github.com/qgis/QGIS/pull/1895
-
06:28 AM Bug report #12008 (Closed): wordwrap does not insert custom delimiter anymore
- Ok, apologies for not understanding the doc OK. I wasn't aware of such invisible space characters, we should explain...
-
- Regis, I'm the one who implemented the expression engine's wordwrap() function.
The only function variables I imple... -
- Regis, apologies if my comments felt harsh - they were meant to be in completely neutral tone.
I am only trying to u... -
- I don't recall it being in Expression+ but I will check now.
-
- ???? I don't get the point here. You are free to put it back from blocker to lower priority if you judge it's not a r...
-
- Is there anything to fix? The wordwrap() function never worked the way as you indicated as "before" - it always worke...
-
- Did someone fixed it?
-
- Hmmm no idea... all I know is that wordwrap function was contributed by Mathieu (nirvn).
Can we close this issue? -
- Ouch, was it in ExpressionPlus plugin before being committed? I remember Nathan having published expressions that way...
-
- Hi Regis
I have just checked - there is no wordwrap() function in 2.2. It was added in 2.4 and since then it works t... -
- Hi Martin,
before :... -
- I just found out there's a "check-no-x" Makefile rule. Why not making that the default for "check" ?
Or what's the re... -
- I don't think there's any reason for "make check" to map windows on the running desktop, so why not always running xv...
-
- Thanks Dave for more details. Could you try to simplify your test case even more: have a MS SQL layer with just one p...
-
- The crash happens when doing the edits. Activate the node edit tool, click the line to make the nodes active, then cl...
-
-
- When does it crash? When committing the changed features - or when doing the edits? In case of the latter, the proble...
-
03:56 AM Bug report #12134 (Closed): Announcements of photos in the background
- That's right. It was a problem with my data. Some tfw's have lacked. Sorry, that I've not noted it before and thanks ...
-
- That's right. It was a problem with my data. Some tfw's have lacked. Sorry, that I've not noted it before and thanks ...
-
03:09 AM Feature request #4256: Diagram overlays: labels also for pie charts
- I would like to second that request, as I think it would be nice to have the ability to display values labels on pies...
-
- I would like to second this request, as I find it very important to be able to tune label and diagram display indepen...
-
- No... I am sorry. You can't close the bug.
I created a video with a query of a pixel with MapInfo 6.5/Vertical Mappe... -
02:26 AM Bug report #12090 (Closed): QGIS Server: getFeature expression does not work
- Fixed in commit:27bf440eace80c4f56c0f191706dfe1b046bcc96
-
- Actually, it seems it may be related. As an experiment, I loaded one of my troublesome projects with plugins disabled...
-
- Giovanni Manghi wrote:
> Maxim Broos wrote:
> > I can confirm this as well, adding a print composer adds loading time... -
- Steps to reproduce:
- Run Refactor fields using the attached shapefile
- Go to field "Nt", change its type to "doub... -
- This must be the same problem with not doing REPACK after editing (#11007 and #10560), resulting in a shapfile in sem...
-
- I confirm it too - it's the same problem like in #11007 and #11989 with shapefiles that have not been repacked
-
- I confirm it too - it's the same problem like in #11007 and #11989 with shapefiles that have not been repacked
-
- In QGIS master when adding a print layout the project loading time increases a lot.
Even creating new empty layputs,...
2015-02-09
-
- Angelika Schloesser wrote:
> Not shown image:
>
> Corner Coordinates:
> Upper Left ( 72000.000, 82000.000) ( 6... -
- Not shown image:
Corner Coordinates:
Upper Left ( 72000.000, 82000.000) ( 6d 3'21.03"E, 49d40'17.22"N)
Lower L... -
- Angelika Schloesser wrote:
> I have run the "info" tool and compared the results from one image, that was once shown,... -
- I have run the "info" tool and compared the results from one image, that was once shown, and once not. Information wa...
-
- Angelika Schloesser wrote:
> Every orthophto has a size about 45 MB. The selected coordinate reference system is corr... -
- You can find two screenshots of my project attached. It includes about 30 orthophotos, which should be all shown in t...
-
- You can find two screenshots of my project attached. It includes about 30 orthophotos, which should be all shown in t...
-
- Maxim Broos wrote:
> I can confirm this as well, adding a print composer adds loading time. But adding ten print comp... -
- I can confirm this as well, adding a print composer adds loading time. But adding ten print composers doesn't add ten...
-
- Giovanni Manghi wrote:
> Martin Dobias wrote:
> > Could you please ensure that the problem is not caused by one of th... -
- Martin Dobias wrote:
> Could you please ensure that the problem is not caused by one of the plugins? Either start QGI... -
- Could you please ensure that the problem is not caused by one of the plugins? Either start QGIS with --noplugins argu...
-
- Corey Burger wrote:
> You are correct, however you have to create an empty symbology and then set it is any version o... -
- You are correct, however you have to create an empty symbology and then set it is any version of blank. Ideally, I wo...
-
- how this is different from #12160 ?
-
- The Shortest Path tool will fail if not yet setup. However, it doesn't tell you where to find the settings or offer t...
-
- I am not sure what is your actual problem. Could you please post a sample expression with wordwrap() that exhibits th...
-
- Corey Burger wrote:
> I have open #12167 for the NULL issue
why filing two tickets for the same issue? -
- Corey Burger wrote:
> I have open #12167 for the NULL issue
why filing two tickets for the same issue? -
- I have open #12167 for the NULL issue
-
- I think I have figured out the issue: if the table has rows with NULL in them, it will fail. I will open a separate bug.
-
- No, write an expression like this $FIELDNAME = 'value' either writing out manually or using the auto-select tool. Des...
-
- I'm not sure I follow. Do you mean if you have an expression like @'hello world'@ you expect it to fail because it's ...
-
- The "Show Label" option with an expression will apparently fail silently, leaving the user with labels that are appea...
-
-
- !testy.png!
Like that? -
- Yes, exactly that. Sorry, should have pointed that out. It appears to happen with both string and whole number fields.
-
- and the expression is @"fieldname" = 'value'@ correct?
-
- If you are attempting to limit labels based on a field that contains NULL values, any attempt to select on that field...
-
- Fixed in changeset commit:"68f94647fddf3b972bbc96db5a53c81fa654662f".
-
- Currently, there is a limitation that a table can only be joined once. I wanted to join the same table multiple times...
-
11:10 PM Bug report #12168 (Closed): Menu item text of processing not translated
- Menu item text of processing in the main menu are not translated.
Context name for the menu translation has been cha... -
- Since QGIS 2.4 there is support for using band offset and scale as reported by GDAL. Indeed the band 4 has offset and...
-
- FYI at Lutra Consulting we have recently started a crowdfunding campaign to bring an improved tracing tool to QGIS co...
-
- The ability to trace another object is a pretty key and basic geoprocessing function, thus Autotrace (or something si...
-
-
- Yep! Thanks. The more I played with it the more I was thinking that is the way it was supposed to be - not how I was ...
-
- The snapping modes are really meant to be used as alternatives to each other and the tolerance is not supposed to be ...
-
- This may be "the way it works" - but I thought I would chime in... Gotta a question on the new snapping options. If I...
-
- Fixed in changeset commit:"b35a596af47d1f0108eedf014c5c56e34e111b55".
-
- Fixed in changeset commit:"dc156c8d79a34ee119975160cc3e480c97a0bf37".
-
- And now it won't reproduce after successfully doing it several times. Closing as unreproducible.
-
- I don't see that here. Also please add more details to tickets so they can be searched easier.
-
- When you group items, it flips the order of them. It shouldn't.
-
09:40 PM Feature request #12164 (Open): Batch Processing Interface and Layer Groups
- I just thought I'd submit a feature request as an improvement to the batch processing interface that I would certainl...
-
- The ESRI File GeoDATABASES are accessed through "Directory", which took me quite a bit of finding the first time I tr...
-
- If the Shortest Path tool is setup, it will fail. However, that fail messages is basically useless, as it doesn't tel...
-
- For some reason, Shortest Path is called "Road Graph" in the Vector menu. This makes finding the settings for the Sho...
-
- The Attributes toolbar has select and select by expression, but select by location is buried under Vector>Research To...
-
02:36 PM Bug report #7774: Style in DB - add custom form doesn't work
- Just to have an update for master (2.7):
using the "save style in database" dialog the form is correctly saved into ... -
- mescal72 - wrote:
> Could it be considered overvelmed by Processing "OGR - import Postigis vector" tools ?
yes, espe... -
- Could it be considered overvelmed by Processing "OGR - import Postigis vector" tools ?
-
- the original issue not affects the master. I also try the problem reported by Giedrius Vaivilavičius and all seem to ...
-
- Does this also affect master? I can't seem to reproduce it.
-
12:46 PM Bug report #6413: Support SLD with multiple FeatureTypeStyles
- I added support for this in Github pull request 1894: https://github.com/qgis/QGIS/pull/1894
I'm open to comments an... -
- Jürgen Fischer wrote:
> Tried with airports.shp from the sample data - with a value map on "use". Seems to work fine... -
- Tried with airports.shp from the sample data - with a value map on "use". Seems to work fine for me.
Sorting by "cat... -
- Surely it is a regression from version 2.0, but I'm not sure if the 2.2 is the first version affected.
-
- mescal72 - wrote:
> As I said it's not a real issue but just an odd behaviour that can be boring or can create confus... -
- here the attachment, sorry....
-
- Jacob Madsen wrote:
> As far as I know, we encountered this issue back as early as version 2.0, and it's been present... -
- As far as I know, we encountered this issue back as early as version 2.0, and it's been present since.
We have not t... -
- It is probably because I loaded the whole group as WMS layer into QGIS. If you load only 'Langsamverkehrszonen', it w...
-
03:27 AM Bug report #12155 (Closed): Dutch Translation not correct for 'Deze laag heeft een dialoogvenster...
- Dutch Translation not correct for 'Deze laag heeft een dialoogvenster Eigenschappen' moet waarschijnlijk 'geen' zijn
-
- Perhaps it is because of issues when one would insert, update, delete a field which has been joined to the layer?
If... -
- Fixed in changeset commit:"ee50520a52e6ce543c5c95743d28fed50b636eae".
-
- Richard Duivenvoorde wrote:
> I will try on another machine, but here with me still crashing: see trace below
>
> No... -
- Richard Duivenvoorde wrote:
> I will try on another machine, but here with me still crashing: see trace below
>
> No...
2015-02-08
-
> With the attached test.sqlite:
I think you missed the attachment. Cheers!-
- it seems to work on master, see attached image. Can you test and report back? thanks.
-
- it seems to work on master, see attached image. Can you test and report back? thanks.
-
- as far I can see on my qgis master it doesn't work in Processing either.
Anyway is a regression as is was working on... -
- as far I can see on my qgis master it doesn't work in Processing either.
Anyway is a regression as is was working on... -
- as far I can see on my qgis master it doesn't work in Processing either.
Anyway is a regression as is was working on... -
- When trying to select features in layer A that intersect features in layer B, the tool "Select by Location" (from men...
-
- Bogdan Hlevca wrote:
> At least you should pop up an error message instead of silently creating an empty layer. By a... -
-
- Same problem here with only shapefiles as vectors and geotiffs as rasters. No database connections. More than 80 laye...
-
- Fixed in changeset commit:"0593ef6a2635876f31453a6133fe5ebaa0838f3b".
-
- QgsSnapper.snapPoint python binding changed from QPoint to QgsPoint.
This introduces the following error:
TypeError... -
10:57 AM Bug report #12145 (Reopened): Master does not compile with Qt5 libraries
- Got master/latest from git. Still not compiling for me. Perhaps I need a QWT library based on QT5? Would QWT6 do bet...
-
- Fixed in changeset commit:"2e9cc1a4fff94811d87f7958e3defe64ca0462d5".
-
- Related commit (fix for manually-placed labels): https://github.com/strk/QGIS/commit/297c30da805115c9b7a4592f295c6da4...
-
- Rotated symbols that have a data-defined rotation field or are rotated with "Symbology -> advanced -> rotation field"...
-
- Duplicate of #6085
-
- Duplicate of #6085
-
- Adding screenshots that shows the issue; check the rulers to take note of the content shift.
-
- Adding screenshots that shows the issue; check the rulers to take note of the content shift.
-
- Adding screenshots that shows the issue; check the rulers to take note of the content shift.
-
- Since QGIS 2.6, the content of a map item will incrementally shifts downwards as the zoom level increases when starti...
2015-02-07
-
- *new description:*
qgis (the underlying libraries) is less forgiving then other programs when it comes to do geospat... -
03:16 PM Bug report #12149 (Closed): "Map will be printed here"
- Every time I open an existent project, the print composer window "forgets" the frame I've stablished for the map. The...
-
- At least you should pop up an error message instead of silently creating an empty layer. By any programming rules thi...
-
- QGIS (the underlying libraries) is known to be less forgiving than arcgis when input layers have geometry issues.
In... -
- QGIS (the underlying libraries) is known to be less forgiving than arcgis when input layers have geometry issues.
In... -
- QGIS (the underlying libraries) is known to be less forgiving than arcgis when input layers have geometry issues.
In... -
- Hi Marco,
Very strange - it does not work on my QGIS server. I will try on a different machine - or we could have a ... -
- As I said it's not a real issue but just an odd behaviour that can be boring or can create confusion.
With the attach... -
- Hi, could you make an example? I just tested here on qgis master and I can't see any issue (but maybe I have not unde...
-
- Fixed in changeset commit:"a40eca4a343eacff8c610e7f945e675a0edf0ec6".
-
- Fixed in changeset commit:"7d6b7ccc507f6ef6362bf643a219d81b560e6549".
-
06:20 AM Feature request #12147 (Open): Scale bar subdivisions at right side without labels
- There are scale bar subdivisions without labels only left from zero, and it would be nice to have them at the right s...
-
- Hi there!
I found a problem in QGIS 2.6.1 while working with joined layers and showing them in forms definded in 'dra... -
- Angelika Schloesser wrote:
> Ok, next try ;-) : I open a new project in which 19 photos should be in the background. ... -
- it seems it works only if the source of the image is a local file, it doesn't work if the source of the image is a ht...
-
- it seems it works only if the source of the image is a local file, it doesn't work if the source of the image is a ht...
-
- it seems it works only if the source of the image is a local file, it doesn't work if the source of the image is a ht...
-
- Corey Burger wrote:
> Although a low priority, I think this is a valid use case, primarily as creating discrete label... -
- Corey Burger wrote:
> Although a low priority, I think this is a valid use case, primarily as creating discrete label... -
- raising the priority, but not sure that this will raise the attention of someone. Diagrams is one of those components...
-
- raising the priority, but not sure that this will raise the attention of someone. Diagrams is one of those components...
-
- raising the priority, but not sure that this will raise the attention of someone. Diagrams is one of those components...
-
- this seems more like a question rather than a issue report. Please check with the devs in the developers mailing list...
-
- this seems more like a question rather than a issue report. Please check with the devs in the developers mailing list...
-
- The obvious choice would be to port to qgis core the "numerical vertex edit" and the "numerical digitize" plugins, th...
-
- The obvious choice would be to port to qgis core the "numerical vertex edit" and the "numerical digitize" plugins, th...
-
- The obvious choice would be to port to qgis core the "numerical vertex edit" and the "numerical digitize" plugins, th...
-
- Other shortcuts also also not working like ctrl-j. In my case (master on linux) ctrl-s does nothing too (not even the...
-
- Other shortcuts also also not working like ctrl-j. In my case (master on linux) ctrl-s does nothing too (not even the...
-
- Other shortcuts also also not working like ctrl-j. In my case (master on linux) ctrl-s does nothing too (not even the...
2015-02-06
-
-
-
- Building CXX object src/core/CMakeFiles/qgis_core.dir/symbology-ng/qgssymbollayerv2registry.cpp.o
[ 13%] Building CXX... -
- I have seen this reported in the past. Because the shape files are slightly larger than allowed I paste here the link...
-
- The scale gets wrong if one adds a tiled baselayer (e.g. Google or OSM via OpenLayers plugin, or via GDAL XML). E.g. ...
-
- PR is ready for merge. Travis passes and Nyall deeply tested manually. Re-assigning to him for the final merge.
-
- PR is ready for merge. Travis passes and Nyall deeply tested manually. Re-assigning to him for the final merge.
-
- Rotated indicator is ready here: https://github.com/qgis/QGIS/pull/1889 -- Tests welcome
-
- Thank you for your help, unfortunately it didn't help in my case. But...
I installed QGIS 2.6.1, GRASS GIS 6, SAGA 2.... -
- last comment has been modified.
wrong: @url.toString()@
right: @unicode(url.toEncoded())@ -
03:37 AM Bug report #11589: Diagram labeling doesn't work when 'on the fly' CRS transformation is enabled
- Can't we flag this as a blocker ? (or at least high priority ?)
It makes the whole diagram feature unusable in a lot ... -
02:01 AM Bug report #12142 (Closed): Transifex QGIS-desktop wrong attribute table order description
- Hi,
in the Transifex QGIS-desktop project there is a mistake concerned attribute table order, in line 11874 it is wr... -
01:37 AM Bug report #12141 (Closed): Map Tips HTML: images added with <img src> are only shown if source i...
- 1.html img tag has failed
As shown in snap.jpg,
KML Description field of "Tag" feature is:
<img src="http://... -
01:01 AM Bug report #12119 (Closed): Processing and batch mode: fields filled with "0"
- Fixed in changeset commit:"f6d533a807a43cc59a2fb4bafb44ab18498d51db".
2015-02-05
-
12:12 AM Bug report #12140 (Closed): Opening a new project within python plugin causes blank screen
- Hi!
I am trying to close the current project and open a new project in my python plugin with help of following code:... -
- You need to convert unicode characters to ascii (URL encoding)....
-
-
01:50 AM Bug report #11274: File path encoding in "delimitedtext"-Provider
- It doesn't fail in the GUI... I think the URI-Constructor of the QgsVectorlayer isn't used there. Our plugin is also ...
-
- I've just tried to produce a minimal example, but unfortunately the issue doesn't seem to manifest itself with small ...
-
- I can confirm the issue but I can't replicate it every time. As said It seem to occurs after the first save and in an...
-
- Hi, we have faced such things here and found some issues that might be in cause:
* layers are queried for extent and... -
- this seems a pretty important issue, but that I cannot easily replicate unless you can share a full project and data....
- 11:23 PM Bug report #12069 (Closed): GUI for New Vector Layer is Abnormally Large
- Fixed in changeset commit:"59b758bb2718195dc0afff1a9a38245d45fda5b0".
-
- I will try on another machine, but here with me still crashing: see trace below
Note: I'm loading this in an empty p... -
- No crash here on Windows at least.
-
-
- when new objects are inserted into a spatialite layer, records are inserted reversed.
This is no a real bug but it c... -
12:05 PM Feature request #12138 (Open): Digitize/edit features using coordinates
- Although QGIS provides the ability to add points through WKT, CSV and even POSTGIS, this is doesn't help when you nee...
-
11:56 AM Bug report #10477: Shortcut CTRL+R to invert selection is not working
- In Attribute Table too, when "Ctrl+S" is used, it inverts selection instead of save changements (Windows 7, QGis 2.7-...
-
- caused by this commit commit:1eec3b9ecf647e10749091495061d2b6a41b67eb
-
- Although a low priority, I think this is a valid use case, primarily as creating discrete label-only classes is very ...
-
- you are probably doing it wrong, see for example this
https://www.youtube.com/watch?v=Qof4oDLxcmE
please reopen if ... -
- you are probably doing it wrong, see for example this
https://www.youtube.com/watch?v=Qof4oDLxcmE
please reopen if ... -
09:04 AM Feature request #12136 (Closed): Add option to only place a label if it fits inside of a polygon
- Hello,
It would be useful if there was an option to only place labels if they fit inside of the polygon. Currently ... -
- fixed with
https://github.com/qgis/QGIS/pull/1885
at least for the most important modules: translate, warp and rast... -
- fixed with
https://github.com/qgis/QGIS/pull/1885 -
- I tested it here, however it seems to work here (unless I overlooked something). E.g. doing a featureinfo at the gree...
-
- Ok, next try ;-) : I open a new project in which 19 photos should be in the background. If I load them as grid data, ...
-
- I'm sorry I don't follow what you mean. You try to explain it a different way.
-
- Storing large amounts of background photos (scenery, Orthofotos), they are partially not indicated, so that one canno...
-
03:49 AM Feature request #12128 (Rejected): modelus: "save as python script" in the context menu
- Duplicates #11620.
And yes, this option was removed during modeler overhaul, as it is buggy and does not really work -
- Duplicates #11620.
And yes, this option was removed during modeler overhaul, as it is buggy and does not really work -
- I think that has been removed on purpose, but not 100% sure. Let's see what Victor or Alexander will say.
-
- I think that has been removed on purpose, but not 100% sure. Let's see what Victor or Alexander will say.
-
- I think that has been removed on purpose, but not 100% sure. Let's see what Victor or Alexander will say.
-
- I think that has been removed on purpose, but not 100% sure. Let's see what Victor or Alexander will say.
-
- Loading it does not crash, but it does not show anything meaningful either.
-
- duplicate of #10976
-
- duplicate of #10976
-
02:26 AM Bug report #12132 (Closed): Attribute editing refresh problem
- Hi,
I have noticed a problem in successive versions of QGIS (and also on version 2.6):
When editing a value of an at... -
- Janos Meszaros wrote:
> Unfortunately, in my case a local user can't use GRASS and SAGA algorithms from processing to... -
- Jeff Tackett wrote:
> This issue is in 2.6.1 and the project we are upgrading from 2.0.1. We are not able to see the ... -
- Jeff Tackett wrote:
> This issue is in 2.6.1 and the project we are upgrading from 2.0.1. We are not able to see the ... -
- Jeff Tackett wrote:
> This issue is in 2.6.1 and the project we are upgrading from 2.0.1. We are not able to see the ... -
- Jeff Tackett wrote:
> This issue is in 2.6.1 and the project we are upgrading from 2.0.1. We are not able to see the ... -
- Jacob Madsen wrote:
> Hello
>
> I need to reopen this case. This issue still occurs frequently for specific users. I... -
- Julien Perrot wrote:
> OK, I manage to point the exact problem :
> The field "gid" I want to use is setted as "Hidden... -
- Julien Perrot wrote:
> OK, I manage to point the exact problem :
> The field "gid" I want to use is setted as "Hidden... -
- Julien Perrot wrote:
> OK, I manage to point the exact problem :
> The field "gid" I want to use is setted as "Hidden... -
- Julien Perrot wrote:
> OK, I manage to point the exact problem :
> The field "gid" I want to use is setted as "Hidden... -
- Julien Perrot wrote:
> OK, I manage to point the exact problem :
> The field "gid" I want to use is setted as "Hidden... -
- Julien Perrot wrote:
> OK, I manage to point the exact problem :
> The field "gid" I want to use is setted as "Hidden... -
- Still true on he latest master.
-
- Still true on he latest master.
-
- Still true on he latest master.
-
- Still true on he latest master.
-
- duplicate of #3843
-
- duplicate of #3843
2015-02-04
-
- Yes, you're right, it is advanced editing operation. With two partially overlapping poligon A and B I could perform a...
-
- I am trying to create a label-only layer to show labels on another layer. However, if there are no styles shown, then...
-
- As a recent Arc convert, I miss the ability to create multiple label classes. I recognize that you can fake this with...
- 03:52 PM Bug report #12100 (Closed): in QGIS master field calculator opens by default on the function editor
- Fixed in changeset commit:"9de6ae9f3f98374e3e6c8ea93c0ae805b890e4e6".
-
- I will fix this today. The red line is a 90 column guide line that most people stick too when using Python.
-
- I often find myself working off of a Composer map that I have previously created. I love that I can freeze layer visi...
-
- Martin's patch applied in a PR that'll be used for staging: https://github.com/qgis/QGIS/pull/1882
-
- The problem with Martin patch is that the rendered image becomes larger as rotation is added. It is not clipped and p...
-
11:52 AM Feature request #12128 (Rejected): modelus: "save as python script" in the context menu
- 'Save as Python script' is not available on the context menu in the Processing Toolbox.
-
- Unfortunately, in my case a local user can't use GRASS and SAGA algorithms from processing toolbox on Win7 64bit. I a...
-
07:16 AM Bug report #9671: SAGA and GRASS: "missing dependency" error when logged using "Windows network u...
- If I need to use toolbox I have to run QGIS as (local) different user (shift + right click). Of course this way I loo...
-
- Could you find any solution for this problem? Because looking on the description of the problem, it seems to me that ...
-
08:13 AM Bug report #12127 (Closed): Help text for Models does not save In Graphical Modeler
- When documenting models created in the graphical modeler. You can click the 'Edit model help' button and document you...
-
- Apparently still valid: the result of st_resample cannot be read.
CREATE TABLE dtm1k
AS SELECT rid, ST_Resample(ras... -
07:19 AM Bug report #12113: Actions launched from attributes table does not work if field has a "hidden" w...
- OK, I manage to point the exact problem :
The field "gid" I want to use is setted as "Hidden" in the fields propertie... -
- Often, I have projects with many print composers defined. These projects involve dynamic data that changes frequently...
-
- Forgot to add, I see the same behaviour on both 2.6.1 and master.
-
- I think these two issues are related:
- Opening a project with many (>100) layers takes a _very_ long time. One of m... -
06:18 AM Bug report #3400: On project load the Selection color is not properly set.
- This issue is in 2.6.1 and the project we are upgrading from 2.0.1. We are not able to see the selection of features ...
-
- Hello
I need to reopen this case. This issue still occurs frequently for specific users. I'm on QGIS 2.6 now, and th... -
- Settings this to "normal" priority. After discussing this with Martin we decided to revisit this in the next QGIS ver...
-
- Settings this to "normal" priority. After discussing this with Martin we decided to revisit this in the next QGIS ver...
-
- I have a point layer where the point symbols should be interactively rotateable.
There is a rotation tool in the "Ad... -
- My bad. I just did a clean re-install of the QGis-server package and it works perfectly.
-
- Jeffrey Bostoen wrote:
> Here's the shapefile. ( lyr_mob_strooiplan ).
> When viewing the WMS, I only see darker poly... -
- Special character could be an ä - any non english letter...
-
02:39 AM Feature request #12124 (Open): Set QGIS Proxy settings before installation
- Actually the proxy is configured in {home}/.config/QGIS/QGIS2.conf
This file is generated when the specific user sta... -
- If it's not possible to fix this before QGIS 2.8 is released I would suggest removing this option
-
02:07 AM Bug report #12112: "Save as" fails to export from PostGIS (or Spatialite) to CSV when the are two...
- Sorry, Giovanni, for the unnecessary extra work...
-
> The issue occurs with PostGIS layers (shape works as mentioned above). The PostGIS table contains the following co...-
> The issue occurs with PostGIS layers (shape works as mentioned above). The PostGIS table contains the following co...-
- Hi Giovanni,
thanks for looking at this.
I am having this issue on two fresh and clean OSGeo4W installations on two ... -
02:00 AM Bug report #12122 (Closed): No text maximum size for mutilines "Text Edit" (QPlainText) form cont...
- Hello,
if you use a "Text Edit" Edit Widget on a field in QGis form, the text maximum length is limited to the maxim... -
- PostGIS/Spatialite queries are often written project specific. However, they might also be re-purposed in other proje...
2015-02-03
-
- This also affects all other tools that accept extent as input parameter. As result it is almost impossible to create ...
-
- Here's the shapefile. ( lyr_mob_strooiplan ).
When viewing the WMS, I only see darker polylines, without colors. Same... -
- the project file without the data does not help.
-
- For some reason - maybe it is by design? - the WMS seems to ignore the rules I've set for a particular shapefile ("ly...
-
- Is this a duplicate of the bug I posted at #10596 ?
-
- A contributed patch by Martin was proveded by Mathieu here: http://lists.osgeo.org/pipermail/qgis-developer/2015-Janu...
-
- I will close this ticket because it seems a problem with this particular file.
The record with attributes
30-12-189... -
- Alexander Bruy wrote:
> Please provide sample data
the data is here
http://goo.gl/pdlURR
anyway I suggest to close... -
-
- it seems to run ok on the latest master.
-
- Confirmed, there are no errors in master. Closing
-
- the tools seems to open and run normally on qgis master, cheers!
-
- in qgis master and in batch mode, all the fields that are about selecting an attribute from an input vector layer are...
-
- any tools that outputs to a folder instead of a file will give that error in batch mode. It used to work in older Pro...
-
03:41 AM Bug report #11951: Python error while using tools with output to a folder instead of a file
- I'll try to reproduce and fix this.
Although I'm not on the "assigned to" list, let me give this a try. -
- On a clean first install of QGIS, the "Advanced Digitizing Toolbar" is not shown although it is checked as so in the ...
-
- Stefan Blumentrath wrote:
> Just downloaded latest master (2.7.0-88 in OSGeo4W) and tried again, but i get the same e... -
- Just downloaded latest master (2.7.0-88 in OSGeo4W) and tried again, but i get the same error:
"Export to vector fil... -
- I cannot confirm on qgis master, where it seems to work as expected. Please give qgis master a try and/or attach a sa...
-
- Fixed in changeset commit:"3c2a92b9ee06222e5d6dbe2b89256e6fa9ba155c".
-
- fixed with
https://github.com/qgis/QGIS/pull/1879 -
- Uncaught error while executing algorithm
Traceback (most recent call last):
Traceback (most recent call last):
File... -
- I don't think that this refers to the geoprocessing operation, as it is already possible to choose the same input lay...
-
- I don't think that this refers to the geoprocessing operation, as it is already possible to choose the same input lay...
-
- I can't see any difference while testing on both linux and windows using qgis master and exporting to pdf. Could you ...
-
- I can't see any difference while testing on both linux and windows using qgis master and exporting to pdf. Could you ...
-
- I cannot confirm after having tested on QGIS master on both linux and windows. Please give it a try and report back.
-
- Jeffrey Bostoen wrote:
> Perhaps this might add more info:
> * https://wiki.state.ma.us/confluence/display/massgis/Ge... -
- I spoke with Paolo and he suggested to close this.
-
- I spoke with Paolo and he suggested to close this.
-
- Given the fast ogr based tools we will have in qgis 2.8 it could be useless to fix this.
-
-
> I don't know how this worked in previous versions.
this is the point, I already confirmed that joined attributes ...-
- This problem also affects Master in Windows (OSGeo4W).
-
- Randal Hale wrote:
> I'm thinking this may have also migrated into "Save as..." when right clicking on a layer. I don... -
- there is a new PR
https://github.com/qgis/QGIS/pull/1875
that has net yet been merged.
2015-02-02
-
-
- fixed with
https://github.com/qgis/QGIS/pull/1878 -
- fixed with
https://github.com/qgis/QGIS/pull/1878 -
- fixed with
https://github.com/qgis/QGIS/pull/1878 -
-
-
- I'm thinking this may have also migrated into "Save as..." when right clicking on a layer. I don't remember the GUI b...
-
- In Print Composer, Page Setup configured for 11" x 17" in Landscape, margins 0.2"
Checking "Print as Raster" gives a... -
- I updated Master on Linux to 2.7.0+git20150202+6e94688~precise-ubuntugis1 and when I try to run any GRASS Processing ...
-
- Fixed in changeset commit:"2c820bb925060f4546304d0ef57fd3e076fc4662".
-
- Currently, QGIS server does not properly display NULL values as "NULL" string. String data types appear as empty stri...
-
- fixed in commit:ca459ee4e
-
- At this moment it can not be tested in Linux because of #12011
-
- This error occurs whenever I try to run a query in DBManager SQL window, in master version 2.7.0-87 (OSGeo4W 64bit).
... -
- Perhaps this might add more info:
* https://wiki.state.ma.us/confluence/display/massgis/GeoServer+-+WFS+-+Filter+-+DW... -
- We are indeed talking about QGis Server.
The MySQL is on another server. If I set up the service using QGis Desktop ... -
04:23 AM Feature request #4450: Legend symbols (in print composer) are ignoring the "scale size field" opt...
- Related to #11491
-
- Hello everybody,
A little bug existing since some version of QGIS (since 2.2 at least) :
When a custom action creat... -
- QGIS does not export a layer containing a column named ID to CSV using "Save as" dialog.
See discussion here:
http:/... -
- Exporting attribute table from PostGIS layers to CSV does not work with a layer containing several thousand record an...
2015-02-01
-
- Simon - nothing to report, as far as I'm aware no one is currently tackling this issue.
-
- option added here
https://github.com/qgis/QGIS/pull/1874
as
-lco PRECISION=NO
from the ogr pg_sql driver. -
- option added here
https://github.com/qgis/QGIS/pull/1874
as
-lco PRECISION=NO
from the ogr pg_sql driver. -
06:43 AM Feature request #10313: List of available OGR drivers
- +1 from me for "Raster drivers" and "Vector drivers". Both worlds are still apart, except for the PDF driver which ha...
2015-01-31
-
-
-
-
-
- Giovanni Manghi wrote:
> I have a fix for it.
https://github.com/qgis/QGIS/pull/1872 -
- I have a fix for it.
-
- fixed with https://github.com/qgis/QGIS/pull/1872
-
- Can you provide a postgis or spatialite query that does what you want? It would help developers understand your reque...
-
- Add the possibility to perform a difference operation from two polygons that stay in the same layer, with a similar b...
-
- Already fixed in latest master.
-
- Already fixed in latest master.
-
- When I use custom forms a gray box cover the top left part of my form.
See the example attached image -
- By default you use the del key.
-
- By default you use the del key.
-
- Is it possible to add the undo action (using ctrl-z) in order to delete the last node digitized ?
Now when ctrl-z is ... -
- A solution can be to set the FID field uneditable by default into the edit widget option and prompt users with a warn...
-
- The problem is due to some layer with local italian character (accented chars)
-
- I've the same problem from many (but not all) qgis processing algorithm (eg: join attribute table, count point in pol...
-
- When opening "Import into PostGIS" from Processing I've this python error:
Traceback (most recent call last):
File... -
From 1e936df on Jan 26, 2015 and newer, I can't build QGIS master on FreeBSD:...-
- duplicate of #12011
-
- duplicate of #12011
-
- On qgis master 2.7 on linux mint when I try to open the sql editor DBManager return this error: ...
-
- It's work fine, it was my fault. Simply it not affects the legend in composer.
Sorry for the noise. -
- The new feature that allow to turn off and on the single symbols doesn't work when using the point displacement rende...
-
- Addressed in GDAL trunk
-
- Addressed in GDAL trunk
2015-01-30
-
12:48 AM Bug report #12092: Feature Count does not update properly on categorized features
- I updated again (c19eb60 and now fe27b63) and issue is still there on my Win64.
But I agree with Harrissou: issue occ... -
- Just updated my master version (c19eb60 on Win 32bits) and got the same results than Yannick (with his data and my ow...
-
- Yannick Portier wrote:
> 1. Load the dummy Data.csv attached using the "Add Delimited Text Layer" button (File format... -
- 1. Load the dummy Data.csv attached using the "Add Delimited Text Layer" button (File format "CSV", X field "Easting"...
-
- 1. Load the dummy Data.csv attached using the "Add Delimited Text Layer" button (File format "CSV", X field "Easting"...
-
- 1. Load the dummy Data.csv attached using the "Add Delimited Text Layer" button (File format "CSV", X field "Easting"...
-
11:25 PM Feature request #9362: Export PDF layers from QGIS map composers
- Can we get a status on this or 8771?
-
03:58 PM Feature request #12101 (Open): Try user-selected GDAL/OGR driver first when loading a layer
- QGIS always relies upon the GDAL/OGR driver selection when loading a file, e.g. "as is coded in the OGR provider":htt...
-
- aperi2007 - wrote:
> GDAL has a plan to unify the gdal and ogr.
> So this could be unuseful.
>
> http://lists.osgeo.... -
- Fixed in changeset commit:"843cf04920f6825bee451a4c5005e88711ce5b6d".
-
- Yes, QGis 2.6 gives right value for the same layer/feature.
But this issue can be closed, as next version of master h... -
- It should be fixed or removed then. I don't think a tool that everyone knows it is broken should be shipped in a new ...
-
- It is not a regression. Never worked, as far as I can see...
-
- It is not a regression. Never worked, as far as I can see...
-
- It is not a regression. Never worked, as far as I can see...
-
- From 1:74000 and up (more zoomed out) this behaviour appears. And for some reason it's only one of all symbols that g...
-
- Oskar Karlin wrote:
> It's a truetype font. Attached.
I may have understand the issue. What scale and how many map u... -
- It's a truetype font. Attached.
-
- Oskar Karlin wrote:
> The symbol is a font symbol.
what is the name of the font? is truetype? -
- Does not seems the best choice.
PS
what is about that vertical red line that shows in the function editor? -
- I confirm that is working now with the latest master, hence closed.
-
- Hi Saber,
this should be duplicate of #11983 (it was about spatialite but later confirmed for other formats), anyway ... -
- A draft implementation along the lines of what Martin suggested: https://github.com/vmora/QGIS/tree/custom_legend . W...
-
- Using QGIS as WFS client works for me for WFS layers with joined tables from QGIS server.
Anyway I confirm that the ... -
- Using QGIS as WFS client works for me for WFS layers with joined tables from QGIS server.
Anyway I confirm that the ... -
- Using QGIS as WFS client works for me for WFS layers with joined tables from QGIS server.
Anyway I confirm that the ... -
- Just to be sure, are we speaking about QGIS server here, right?
So the issue would be: if you do a join in a layer, ... -
- How this would work from the user/gui point of view?
-
- How this would work from the user/gui point of view?
-
- It seems ok to me in the latest QGIS master, please try and report back.
-
- see also #12085
-
- this is duplicate of #11787, add your notes there about more exporting options.
The issue about the size of the PDF... -
- this is duplicate of #11787, add your notes there about more exporting options.
The issue about the size of the PDF... -
- you are right, please raise this in the users/developers mailing lists, this can be fixed very easily.
-
- Seems more like a feature request.
-
- Seems more like a feature request.
-
- Seems more like a feature request.
-
- It partially affects also GDAL/OGR tools: for example if you specify in an explicit way (for example with the proper ...
-
- Filipe Dias wrote:
> The user certainly knows which variable is on which axis. But this becomes a problem if you have... -
- The user certainly knows which variable is on which axis. But this becomes a problem if you have send the plot to ano...
-
- IMO this should be a feature request not bug.
-
-
- I attached the sample dataset (used for the previous picture).
This morning, i have tried to open it with QGIS 2.6.1... -
- I attached the sample dataset (used for the previous picture).
This morning, i have tried to open it with QGIS 2.6.1... -
- fixed with
https://github.com/qgis/QGIS/pull/1871 -
- I agree, this would really a must for this tool.
-
- I agree, this would really a must for this tool.
-
02:15 AM Feature request #12099 (Open): Saving results of Topology Checker plugin into a separate file
- Hi to all,
it would be very useful to save the results of Topology Checker plugin into a separate shapefile with the ... -
01:50 AM Feature request #12098 (Closed): "On the fly reprojection" warning
- When adding a new scalebar in Composer, sometimes the units and scale are wrong because "On the fly reprojection" is ...
2015-01-29
-
- If i fool Illustrator and change the <svg> width from 296.926mm to 1122.24mm (mm -> px) and do the same with height, ...
-
- I first put this question over at Gis.stackexchange.com ( http://gis.stackexchange.com/questions/123666/ ) since I be...
-
- I have this map project where I use Map Unit as the unit for all my lines and markers etc (instead of millimeters bec...
-
- Oh and the map is using meters. Projection Sweref 99 TM.
-
- The symbol is a font symbol.
-
- Is the symbol used part of the qgis library? or is a custom one? If is the latter can you attach it? what are map uni...
-
- Is the symbol used part of the qgis library? or is a custom one? If is the latter can you attach it? what are map uni...
-
- Raster layer statistics is affected by the same error.
-
- Algorithm Raster layer histogram starting...
unpack requires a string argument of length 38436 See log for more detai... -
- Vector layer scatterplot doesn't display the names of the XY attributes
-
09:34 AM Feature request #11780: QGIS and UHD (4K) monitors
- Hi all, after a looong research over my problem I finally found my answer!!! This workaround works great, it solves t...
-
- Cannot confirm here on master and data of my own (csv). Please attach sample data and details about symbology and fil...
-
- Cannot confirm here on master and data of my own (csv). Please attach sample data and details about symbology and fil...
-
- Cannot confirm here on master and data of my own (csv). Please attach sample data and details about symbology and fil...
-
- Note:
this only happens when the filter is added from the TOC right click context menu. It works ok if the filter is ... -
- Fixed in changeset commit:"c19eb60d2fe797c475881cfa46666133e410fc70".
-
- Windows supports slashes just fine to my knowledge. Anything else will use backslash as an escape character and there...
-
- Please attach a sample project (with data) that is causing the crash.
Please also try starting QGIS with no plugins,... -
- Please attach a sample project (with data) that is causing the crash.
Please also try starting QGIS with no plugins,... -
- Please attach a sample project (with data) that is causing the crash.
Please also try starting QGIS with no plugins,... -
- Please attach a sample project (with data) that is causing the crash.
Please also try starting QGIS with no plugins,... -
-
- Cannot confirm here, please attach a sample data.
Does it returns the right result, with the very same data and proj... -
- Cannot confirm here, please attach a sample data.
Does it returns the right result, with the very same data and proj... -
- Cannot confirm here, please attach a sample data.
Does it returns the right result, with the very same data and proj... -
- Cannot confirm here, please attach a sample data.
Does it returns the right result, with the very same data and proj... -
- Agree, it would be a very nice feature.
-
- I has also been reported to me. After exporting to PDF the coordinates do show in the result.
-
- I has also been reported to me. After exporting to PDF the coordinates do show in the result.
-
- I has also been reported to me. After exporting to PDF the coordinates do show in the result.
-
- I has also been reported to me. After exporting to PDF the coordinates do show in the result.
-
- I has also been reported to me. After exporting to PDF the coordinates do show in the result.
-
- please raise questions in the users or developers mailing list, on gis.stackexchange or the QGIS irc channel. Also ti...
-
- please raise questions in the users or developers mailing list, on gis.stackexchange or the QGIS irc channel. Also ti...
-
- Oskar Karlin wrote:
> You're right! Thanks!
means that this can be closed? -
> I believe setting /Projections/layerDefaultCrs should be handled in the block of code before - from correct combo ...-
- Hi Giovanni,
I don't know if this ever worked. It is the first time I tried this expression in server context. This ... -
- Hi Andreas, is this a regression?
-
- Hi Andreas, is this a regression?
-
- Forgot to mention that this concerns the response of the GetFeature request.
-
- It seems like in current master the attribute(getFeature()) expression does not work in a maptip.
I used the followi... -
- Filipe Dias wrote:
> I agree, it's rather annoying to have to constantly navigate to the same folders. One could also... -
- Right, sorry. I misread the issue.
-
- Filipe Dias wrote:
> I agree, it's rather annoying to have to constantly navigate to the same folders. One could also... -
- I agree, it's rather annoying to have to constantly navigate to the same folders. One could also argue this is a bug.
-
- Could you please attach a sample dataset? thanks
-
- Could you please attach a sample dataset? thanks
-
- Corruption...
QGIS don't show the real value of a pixel for grid named: "Northwood Numeric Grid Format .grd/.tab (*.... -
- Corruption...
QGIS don't show the real value of a pixel for grid named: "Northwood Numeric Grid Format .grd/.tab (*.... -
> Removed Garmin Custom Map plugin and QGIS now exits without crash.
so it is a plugin issue.-
05:58 AM Bug report #11891: crash dump on exit - win32
- Same crash-dump issue on exit - QGIS 2.6.1, OSGeo4W 32bit, Windows XP - but appeared to start without updating anythi...
-
- Regis Haubourg wrote:
> Hi,
> here is a "tip":http://blog.codefluententities.com/2011/01/20/microsoft-access-databas... -
- Jürgen Fischer wrote:
> Regis Haubourg wrote:
> > Ouch, you get it!
> > But no way to solve that issue - Redmond's f... -
- Shall I close the ticket ? Any work remaining on OGR side?
-
- Hi,
here is a "tip":http://blog.codefluententities.com/2011/01/20/microsoft-access-database-engine-2010-redistributa... -
- It looks like in current QGIS master, QGIS server, does not correctly replace the numeric code of a value relation wi...
-
- This is tool is only available in QGIS Master and 3 different people have already stumbled upon this. It's therefore ...
2015-01-28
-
- Similar options in fTools, GdalTools ("Add result to canvas"), processing ("Open output file after running algorithm"...
-
- It would be good if the "save as" dialogue would remembered the users last choice concerning the "add saved file" opt...
-
- IMHO this is a blocker issue as it is impossible to print maps in which data are transformed using NTv2 files.
-
- IMHO this is a blocker issue as it is impossible to print maps in which data are transformed using NTv2 files.
-
- IMHO this is a blocker issue as it is impossible to print maps in which data are transformed using NTv2 files.
-
- IMHO this is a blocker issue as it is impossible to print maps in which data are transformed using NTv2 files.
-
- IMHO this is a blocker issue as it is impossible to print maps in which data are transformed using NTv2 files.
-
- Hi all, after a looong research over my problem I finally found my answer!!! This workaround works great, it solves t...
-
- Hi all, after a looong research over my problem I finally found my answer!!! This workaround works great, it solves t...
-
11:09 PM Bug report #12086: Style doesn’t update on split multipart when editing
- Yes, I have a few hundred features that I need to make sure are multipart for a good reason.. It's the way I keep tra...
-
- I suppose this bug is related to a plugin.
You should report the bug on the plugin tracker:
https://issues.qgis.org/p... -
- When editing a layer, if you turn a multipart into normal features then change an attribute, style doesn't update whe...
-
- dupplicates #12079
-
- Hi,
when setting a custom color for highlighting identified features, alpha channel / transparency is not applied.
... -
- this already exists.
go in options -> snapping and check "topological editing". -
- Imagine, you have 2 lines where the end of one is snapped to the start of the other line.
It will be great to have an... -
- Yes, please, one feature (or bug)==one ticket.
-
- Are you aware, that there's also a "Vectorlayer save as..." missing for GeoPackage format?
This would enhance chance... - 10:47 PM Bug report #12053 (Closed): Function Editor in Expression widget : Lack of information while hove...
- Fixed in changeset commit:"a20b8e03fdedd23cb2c49e324f93cad7537edf4c".
-
- Sometimes, when editing, I will create a rule-based styleset to hide some features. I do this because you can't edit ...
-
- When multiple windows are open, if you middle click in the main window, QGIS doesn't focus although it will willingly...
-
- Now looking at JPG compared to PDF it seems to me the size difference is because JPG file is saved in RGB colours whe...
-
- #11787 was mostly about getting out georeferenced PDF/TIF from composer which is not that easy in Composer where it m...
-
- I am not aware of any bug caused by that - that is why I flag it as feature request. The reason I am asking for this ...
-
- Does having them the way we do break anything? I have never had any issues.
-
- Any chance to have paths on Windows with backslash instead of slash as it properly should be? I mean show it in "Laye...
-
02:24 PM Feature request #11103: Support for retina displays (HiDPI)
- Joshua - when you made your first attempt at this, did you publish your changes anywhere? Is there a work in progress...
-
12:45 PM Bug report #12080: Copy and paste drops the attribute value
- ...and probably only on Windows (not replicable on Debian and the same layer)
-
- The bug also appears if you copy and paste a feature within the same layer.
-
- When copy and paste a feature from one layer to another layer (in my case Shapefile), the attribute values are set to...
-
- It will be good to have an option in the print composer for the extent to access spatial bookmarks.
For example, atla... -
10:28 AM Bug report #12082 (Closed): Coordinates won't appear (outside the map object frame) in Print Comp...
- In Print Composer, Draw Coordinates won't display coordinates unless selected to appear inside frame. This is on a Ma...
-
- Regis Haubourg wrote:
> Ouch, you get it!
> But no way to solve that issue - Redmond's fault : * It is not possible ... -
- Ouch, you get it!
But no way to solve that issue - Redmond's fault : * It is not possible to install 64 bit access d... -
- Hi,
when setting a custom color for highlighting identified features, alpha channel / transparency is not applied. ... -
05:51 AM Bug report #12077: qgis 2.6.1 crash when pan and zoom
- Attaching the file again
-
- Hey,
Also had it with Qgis 2.4- in zoom or pan the Qgis often crush and writes a minidump file (the last one is attac... -
- When I read .grd MapInfo file (created with Vertical Mapper) with QGIS 2.0, it displays four bands.
The 3 first show ... -
03:25 AM Bug report #12074 (Closed): imac e cinese
- salve ho installato Qgis 2.6 sia sul mio imac che sul mio portatile book pro ma sul fisso ho problematiche sia di ese...
-
01:42 AM Bug report #11759: Python error when running "Import Vector into PostGIS database (available conn...
- I agree with you about the database field, but I think an empty password field is nothing unusual if you configure Po...
-
- This tool makes really sense only if ALL connection informations are filled, otherwise you need to use the other vers...
-
- This tool makes really sense only if ALL connection informations are filled, otherwise you need to use the other vers...
-
- Confirmed, this happens if QGIS has added a custom CRS to its list, so that combobox shows the entire proj4 string, t...
-
- Confirmed, this happens if QGIS has added a custom CRS to its list, so that combobox shows the entire proj4 string, t...
-
- Confirmed, this happens if QGIS has added a custom CRS to its list, so that combobox shows the entire proj4 string, t...
2015-01-27
-
- Just to clarify - you are talking about the attribute editor right?
!http://imgur.com/dml5wQ4.png!
In that case, wh... -
04:03 PM Feature request #12070 (Open): Define map extent on canvas as a center point, not as rectangular ...
- The goal of putting a map on a canvas is to show the region of interest in a desired height and width of canvas space...
-
- Regis Haubourg wrote:
> With or without quotes, I still don't get it to work. I double checked that env var were corr... -
- Jürgen Fischer wrote:
> Regis Haubourg wrote:
> > That solution doesn't work here..
>
> Odd. I must have added the q... -
- Regis Haubourg wrote:
> That solution doesn't work here..
Odd. I must have added the quotes after I tried. Without ... -
- Jürgen Fischer wrote:
> I can open the mdb attached to #8752 using following in the {{qgis.bat}}:
>
> [...]
>
> App... -
- I can open the mdb attached to #8752 using following in the @qgis.bat@:...
-
- Both Windows 7 and UbuntuGIS versions of QGIS Master have an abnormaly Large Layer New Vector Layer GUI. Go to Layer ...
-
11:48 AM Bug report #12011: python error when opening the sql console in DB Manager
- I can confirm this issue in my Mint 17 installation. I get the same error message.
-
- Hi,
As the aim is to collect various scripts and models written by all of us with the "get scripts and models" tool i... -
- *New description:*
#12066-8
*Old description:*
I have all my symbols size set using Map units. It looks grea... -
- during an edit session, you loose the keyboard events when you move away from the canvas (for example by clicking in ...
-
- I think you found something interesting! The password field in the PostGIS connection properties was empty in my case...
-
- In my case the problem was the field "Database" was blank (in postgis connection properties). Once I filled it the to...
-
- I just tested this tool on Ubuntu 12.04 + postgresql 9.1.14 + postgis 2.1.3 (in the same computer, different partitio...
-
- 100% reproducable with current master:
- open a new (point) memory layer in QGIS in empty project
- start editing th... -
03:31 AM Bug report #12063 (Closed): Scalebar - label "map units per bar unit" now out of date
- The scale bar in the print composer can now be configured to use different units, only one of which is "map units".
...
2015-01-26
-
12:22 AM Bug report #12031: Print composer will only export maps if scale is set to 8171 - help!
- go here https://issues.qgis.org/projects/openlayers/issues
Also available in: Atom