Activity
From 2014-06-29 to 2014-07-28
2014-07-28
-
11:48 PM Bug report #10961: Edited Shapefile is written after closing QGIS
- Giovanni Manghi wrote:
> don't know if it answer partially to your question, but when you edit an existing shapefile ... -
08:47 AM Bug report #10961 (Feedback): Edited Shapefile is written after closing QGIS
- don't know if it answer partially to your question, but when you edit an existing shapefile usually the prj,qpj,cpg f...
-
- QGIS seems to write something into the shapefile after closing QGIS or creating a new project.
Steps to reproduce:
... -
10:54 PM Bug report #8824: Exported image from OpenLayer plugin looks shifted no matter of format but look...
- Micha Silver wrote:
> Micha Silver wrote:
> > Thanks, not working for me :-(
-
- Micha Silver wrote:
> Thanks, not working for me :-(
-
- Thanks, not working for me :-(
-
- Micha Silver wrote:
> I'm seeing this behavior again now, with QGIS 2.4 and the Openlayers Plugin 1.3.3
>
> I load a... -
- I'm seeing this behavior again now, with QGIS 2.4 and the Openlayers Plugin 1.3.3
I load a vector layer, then any of... -
06:51 PM Bug report #8911: Table is not updated after field calculator when configured with a "field relat...
- Related or same issue,
Update an existing attribute via the calulator and the displayed table does not change but on... -
06:33 PM Bug report #10887: Qgis return empty QgsComposition from standalone application
- Fabio - can you test explicitly setting your composer map's extent? ie composerMap.setNewExtent(mapRectangle)
-
- Works OK for me... can you test with:
mapSettings = iface.mapCanvas().mapSettings()
c= QgsComposition(mapSettings)
... -
04:59 PM Bug report #10778: Crashes on zoom in-out
- I've compiled the release_2_4 branch from source, and this is resolved for me.
When is this likely to make it into... -
- Works OK for me too.. can you attach a screencast showing the process you use to trigger this?
-
01:05 PM Bug report #10966 (Closed): with OTFR on $area is always computed in square meters even if the CR...
- This is the only way I know how to explain it. If you have a shapefile/Spatialite layer and you turn on "enable on th...
-
12:07 PM Bug report #10955: Error in Windows 64 bit installer
- Sorry I cannot help with a copy of the 2.4 log but when the 2.4 installer failed I saw the same problems "'"d:\\Progr...
-
12:00 PM Bug report #10955: Error in Windows 64 bit installer
- Steven Bottomley wrote:
> I have not tried the 2.2 installer. However, version 2.0.1-3 Dufour (QGIS-OSGeo4W-2.0.1-3-S... -
- I have not tried the 2.2 installer. However, version 2.0.1-3 Dufour (QGIS-OSGeo4W-2.0.1-3-Setup-x86_64.exe) also did ...
-
- Include the @postinstall.log@.
-
- it was ok with the qgis 2.2 installer?
-
11:53 AM Bug report #9967 (Closed): Crash when selecting a Select Single Feature in attribute table
- Closed due to lack of feedback.
If this is still an issue, please reopen. -
- Seems to be an isolated issue, not related to QGIS.
Please open an issue for gnome if this error still occurs. -
10:32 AM Bug report #10957: Digitising & snaps
- I cannot share this data due to law restrictions. I'll try to create some screencast. Now I'm collecting data outdoor...
-
- a few screenshot do not help understand well how to replicate this issue. What would be needed is a sample project an...
-
- Even when input are integer rasters...
-
- It's not yet implemented.
But it would be a nice feature. -
-
- Closed due to lack of feedback.
If this is still an issue, please provide the necessary information and reopen. -
- This is not very clear to me. Any line in the "lines switched" layer do correspond to a line in the "lines not switch...
-
- Closed due to lack of feedback.
If you are able to provide the feedback required to solve this issue, please reopen it. -
- Antonio Locandro wrote:
> Having the same issue, it is a QGIS issue as I used the spatialite icon to add the layer. I... -
- This is a distribution issue.
Please open a ticket on your distribution bugtracker. -
- Closed due to lack of feedback.
If you are able to provide the feedback required to solve this issue, please reopen it. -
-
- Matthias Kuhn wrote:
> Have you updated recently? I fixed a similar issue a couple of days ago.
I have tested with t... -
- Have you updated recently? I fixed a similar issue a couple of days ago.
-
- Does not happen just with postgis, I tested and it affects at least also shapefiles.
-
- Does not happen just with postgis, I tested and it affects at least also shapefiles.
-
- Does not happen just with postgis, I tested and it affects at least also shapefiles.
-
- Does not happen just with postgis, I tested and it affects at least also shapefiles.
-
- Does not happen just with postgis, I tested and it affects at least also shapefiles.
-
- Does not happen just with postgis, I tested and it affects at least also shapefiles.
-
- Thank you very much for reporting this bug.
It is not possible to solve this bug with the amount of information curre... -
-
- Fixed
-
- Fixed
-
- steps:
+ create a project and add a raster layer
+ duplicate the layer
+ in the duplicate layer change manually (for... -
- In the Processing toolbox there is tool "convert format" that should allow convert from/to different data types.
I t... -
06:42 AM Feature request #10962 (Closed): In Load styles from database, make columns sortable
- Fixed in changeset commit:"bdd67836a29c6ad6c401f9a4eb27b0b3d0eda519".
-
- Better: the first table mRelatedTable is sortable, the second is not (QGIS/src/ui/qgsloadstylefromdbdialog.ui)
-
- When loading styles from DB, the name and descriptions are shown in a table, but the content is not sortable as it wo...
2014-07-27
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
12:01 PM Bug report #10958: digitized feature gets stored twice
- Giovanni Manghi wrote:
> in QGIS master or 2.4?
Master. -
- in QGIS master or 2.4?
-
- A digitized feature gets stored twice in a postgresql database.
Ubuntu 12.04
PostgreSQL 9.1
Postgis 2.1 -
- It seems that in Virtual Fields the result of expression with geometry functions like $area or $ perimiter is not sho...
-
- in QGIS master doing a graduated symbology using a virtual field, qgis crashes.
2014-07-26
-
08:53 PM Feature request #8845: PDF output types & placement.
- Some details on PDF/X-3 format. [[http://www.prepressure.com/pdf/basics/pdfx-3]]
I also found this project that look... -
- The information from my error has been posted to the developer.
-
-
-
- I've started work on big project with digitising in QGIS, and found some bugs when snapping:
1. When I try to move po... -
- Executing the following python code and then clicking the map canvas works on QGIS 2.2.
On QGIS 2.4 it needs to be a... -
- Installer QGIS-OSGeo4W-2.4.0-1-Setup-x86_64 results in a problem on Windows 8.1 resulting in an error loading Grass. ...
2014-07-25
-
01:23 AM Feature request #10883: DB Manager: add a timer to the SQL window
- Poor choice of words: freezes as in becomes unresponsive.
I observed this with a query that takes ~5 minutes in pgad... -
04:07 PM Feature request #10883: DB Manager: add a timer to the SQL window
- > Sometimes DB Manager crashes when running heavy queries
_crashes_ or _freezes_? -
06:42 PM Feature request #10947: Use Filter() instead of STIntersects() for better performance in MSSQL
- Thanks for the tests. I will implement 4) if it's the fastest.
-
04:15 PM Feature request #10947: Use Filter() instead of STIntersects() for better performance in MSSQL
- I've done some performance tests with interesting results ;-)
I used "SELECT <id> FROM <table> WHERE ..." with four ... -
- While the query result data are fetched through python connectors, when loading a query layer the query is passed to ...
-
- Your pull request was merged in commit:d522059524. Thanks Ivan.
-
- Your pull request was merged in commit:d522059524. Thanks Ivan.
-
10:22 AM Feature request #10781: Print composer extents add option to auto sync to map canvas extent
- Maybe keeping both options would be nice, keep up the good work! Thanks for the plugin
-
10:19 AM Feature request #10781: Print composer extents add option to auto sync to map canvas extent
- I hope to get it working so that you don't have to click the toolbar button but I need to learn how to work with sign...
-
-
06:50 AM Feature request #7565: relative path in form setting
- It works in 2.4. Can I close it ?
-
-
- In 2.4 the issue is resolved. Can I close it ?
-
- In 2.4 the issue is resolved. Can I close it ?
-
04:49 AM Bug report #10950 (Closed): no lower case attributes when importing from file GDB
- Using QGIS v2.4 and up to date extension packages i spotted a bug.
When importing tables via DB-manager from a esri ... -
04:24 AM Feature request #10929: Add a shortcut icon for the plugin manager on the plugin toolbar
- Harrissou Santanna wrote:
> But without considering my current needs, why "Install and Manage plugins" action should ... -
03:11 AM Feature request #10929: Add a shortcut icon for the plugin manager on the plugin toolbar
- Alexander Bruy wrote:
> Also you can assign keyboard shortcut for plugin manager via Settings → Configure Shortcuts
... -
- right, I missed that tool!
-
- right, I missed that tool!
-
- This is because Processing handle rasters and vectors differently, raster and vector are different inputs. You can us...
-
02:37 AM Bug report #10783: [Processing] ParameterString return "None" as unicode
- This code is in my own algo in python, that's why I can test python code in the modeler.
https://github.com/3liz/Qgi...
2014-07-24
-
- Tried with 32 bit and worked, I was hoping more of a check box that each time the map canvas moved the print composer...
-
- Having the same issue, it is a QGIS issue as I used the spatialite icon to add the layer. I created the view outside ...
-
- I have thought that this was the case too however I can't seem to get better performance on SQL Server 2008. Could b...
-
- I've noticed that "STIntersects()" is used to query the currently visible elements - I think you should consider usin...
-
- I've opened two new tickets #11076 and #10948
-
- >> I've also noticed that "STIntersects()" is used to query the currently visible elements - I think you should consi...
-
- I'm just trying to use QGIS as another GIS platform for our product suite (in addition to ArcGIS, AutoCAD Map, GeoMed...
-
- I would like to use a SELECT statement as data source. This seems to be possible with postgres, but it's not possible...
-
03:37 PM Bug report #10938: master crashing - provider dependency broken
- After an update it does this:
@
Warning: QGraphicsScene::addItem: item has already been added to this scene
Warning:... -
- Confirming:
HP-ProBook-6570b:~$ qgis
Warning: QGraphicsScene::addItem: item has already been added to this scene
qg... -
- fixed in commit:693c2e72
-
- fixed in commit:693c2e72
-
- Matthias Kuhn wrote:
> Can this topic be closed since MT rendering is implemented?
I see your point, because of MTR ... -
- Matthias Kuhn wrote:
> Can this topic be closed since MT rendering is implemented?
I see your point, because of MTR ... -
- Can this topic be closed since MT rendering is implemented?
-
06:55 AM Bug report #10945 (Closed): python API QgsComposerLegend regression 2.2 -> 2.4
- The following code works in QGIS 2.2 :
mapRenderer= self.iface.mapCanvas().mapRenderer()
c= QgsComposition(mapRender... -
06:36 AM Bug report #10944 (Closed): Spatialite layer - unable to change encoding - incorrect names displa...
- When I load Spatialite layer in QGIS the names are not displayed correctly. Used OSM data converted to Spatialite usi...
-
- Fixed in changeset commit:"f87bddf834557d91e42307d9deb9faf85e662c75".
-
- Just realized that this is really old.
I think we would have more noise in here if this was still an issue. If it is... -
- works fine here in qgis master (on Ubuntu 14.04) and the provided project.
-
-
04:14 AM Bug report #10941 (Closed): user defined forms
- can't load a user defined form (.ui)
-
- No crash here.
If it's still reproducable, please reopen. -
- No crash here.
If it's still reproducable, please reopen. -
-
- this is an error of the
_layerCombinations_
3rd party plugin. Please report the issue to the author of the plugin. -
- this is an error of the
_layerCombinations_
3rd party plugin. Please report the issue to the author of the plugin. -
02:55 AM Bug report #10932: qgis not parsing pg_service.conf properly
- how do you account for it working in qgis browser but not in qgis desktop using the same osgeo4w install on the same ...
-
- how do you account for it working in qgis browser but not in qgis desktop using the same osgeo4w install on the same ...
-
- how do you account for it working in qgis browser but not in qgis desktop using the same osgeo4w install on the same ...
-
- qgis isn't parsing .pg_service.conf, but libpq does. So this might be a packing problem in osgeo4w
-
- qgis isn't parsing .pg_service.conf, but libpq does. So this might be a packing problem in osgeo4w
-
- qgis isn't parsing .pg_service.conf, but libpq does. So this might be a packing problem in osgeo4w
-
-
-
- Can you please check if this really fixes the issue.
-
- Fixed in changeset commit:"ae19eefb36cd1fd0ed2fb556b4a5eb503ce0f38e".
-
- Fixed in changeset commit:"e6d3c0be5409f25bfade2f1b957a85753e6f4938".
2014-07-23
-
-
- The real issue is #10939
-
- QgsFeatureRequest allows advanced features filtering via setFilterExpression() method. But seems this does not work, ...
-
- QgsExpression is not able to parse the scientific double format which it produces itself in @.expression()@...
-
- Both debian-nightly and ubuntugis-nightly have this issue after last night's build:
gavin@afrispatial:~$ qgis
Warnin... -
- I can still copy and I get the same crash....
-
01:21 AM Bug report #10931: no zebra frame in print composer
- Sorry Nyall, I though that the single file was enough..
I attach the project file with the same shapefile. Anyway, ye... -
- Did you attach the right file? There's no project file in that archive. Also, can you confirm whether this is a new p...
-
- yep..
in attach a single shape used (but nothing changed with other layers) and a screenshot that shows that the fram... -
- yep..
in attach a single shape used (but nothing changed with other layers) and a screenshot that shows that the fram... -
- It's working ok for me - can you please post steps to reproduce this, or a sample project?
-
- In qgis master (2.5) I cannot draw the zebra frame of a map.
If I activate it, nothing appears in the map canvas. I n... -
01:20 AM Bug report #10937: Some items have coordinates switched when loading PostGIS layer
- I managed to create 2 shapefiles, that demonstrate difference between correct and "switched" geometries. Please unzip...
-
- I am having problem with strange coordinates switching when loading PostGIS layers in QGIS. First, I thought, that pr...
-
- I tried re importing as 2193 but still had an some issues - redraw as well showed the layer as boxes only, but I the...
-
07:34 AM Bug report #10935 (Closed): Error Metasearch client QGIS v2.4 (Arch Linux)
- No se pudo cargar el complemento MetaSearch debido a un error al llamar a su método classFactory()
Traceback (most r... -
- I think the workaround should be accepted as solution and stated in the API documentation according to [1]
The only ... -
- I have set up .pg_service.conf for several users on a network. It is working fine on Linux clients and some Windows c...
-
04:56 AM Bug report #10913: n:n relations
- By "go through", I meant that QGIS would be able to reach the maintenance table directly through the join table. In o...
-
- > As soon as there is a join table, QGIS would adapt relations to go through this table.
What does "go through" mean... -
04:19 AM Bug report #10923 (Closed): Chugiak crashes on OpenSuse 13.1
- Didn't check that before. Update was a great help. Thx.
-
- Didn't check that before. Update was a great help. Thx.
-
04:09 AM Feature request #10316: Add a toggle to turn layer filtering on of
- Yes this should be very useful! The workaround I use is opening the same layer without any filter, and I use the laye...
-
- Use Plugin Reloader plugin for this. Also you can assign keyboard shortcut for plugin manager via Settings → Configur...
-
- Fixed in commit:622e2d1
-
02:50 AM Bug report #10819: markers drawn on wrong side of edge of rings with when draw marker line and li...
- The same applies with "Outline: simple line"'s offset.
Thanks !
2014-07-22
-
- Can you attach a sample project and the .ui you are using please.
-
- You need to also change the editor layout....
-
- I'm developing a plugin and as I'm newbie in programmation, I *frequently need* to deactivate/reactivate my plugin in...
-
- When I close an existing project and open a new one I get an error that appears to be connected to the layer combinat...
-
- This is a packaging issue - as mentioned in the docs that method requires pyqt >= 4.8.4 . currently the 32 bit window...
-
- I mean the Windows 32 bit version.
-
- I have a plugin [0] which uses composerMapItems constructor but the plugin is giving me problems on 32bit versions. ...
-
- Works fine for me.
Can you attach a sample project please. -
-
- Fixed in changeset commit:"9f073834a1e005727ee9cb74628203228586803b".
-
- Fixed in changeset commit:"55c6f8f1b34178a5c222236b757bf02568288994".
-
10:46 AM Bug report #10924: Layers can't be reordered in Chugiak
- Sorry for the mistake.
I tried on my Mint after upgrading to QGIS 1.4, and it worked. I rebooted on Debian, and now i... -
- Of course it is possible :)
I'm closing this ticket because I'm assuming it can be a local issue or that you are doi... -
- Of course it is possible :)
I'm closing this ticket because I'm assuming it can be a local issue or that you are doi... -
- Hello world !
Since QGIS 2.4, moving layers in layers window/panel (to group them or change render) by a simple drag ... -
- The plugin is finished but it is experimental and it only works on 64 bit version
http://plugins.qgis.org/plugins/sy... -
07:37 AM Bug report #10882: Required option to set the default value(NULL) on date fields in QGIS 2.4
- Yes, it's automatically taking the value as NULL if we haven't updated any values on those date fields
-
- are you sure are you using the latest version of the plugin?
-
- James Harvey wrote:
> Here is a test file that I made up from start that I get the same error. I have added the NZ ar... -
- James Harvey wrote:
> Here is a test file that I made up from start that I get the same error. I have added the NZ ar... -
06:17 AM Feature request #10925 (Open): Default DTM style in color ramps of the pseudocolor band
- Have by Default a DTM Style in default color ramps in pseudocolor band.
Please consider use in pseudocolor band a co... -
2014-07-21
-
01:26 AM Bug report #10235: Bottommost layers in a legend group cannot be re-added
- I repeated the test case on QGIS 2.4.0 (and QGIS 2.5.0) and there everything works fine. So, in my opinion this issue...
-
- Confirmed, it is just a master issue as does not happens on 2.4
-
- Confirmed, it is just a master issue as does not happens on 2.4
-
- Confirmed, it is just a master issue as does not happens on 2.4
-
- Confirmed, it is just a master issue as does not happens on 2.4
-
01:56 PM Bug report #10922 (Closed): Editing object attribute data via identify tool duplicates the feature
- For some strange reason changing attribute data via attribute form duplicates whole feature.
Steps to reproduce:
* C... -
- Hi,
I want to use Chugiak on a Desktop with OpenSuse 13.1. When I tried to add any OpenLayers Plugin it caused 13 War... -
12:24 AM Bug report #10862: QGIS 2.4 adds 2 objects in one click while using Python Init functions and own...
- hm - this should definitely go into a 2.4 bugfix release.
I very much hope that there will be a 2.4 bugfix release. -
10:17 PM Bug report #10862: QGIS 2.4 adds 2 objects in one click while using Python Init functions and own...
- It happens in QGIS 2.4 installed on Windows 32 and 64 bit (OSGeo4W on 7x64 and standalone installer on server 2008x86...
-
-
10:02 AM Bug report #10862: QGIS 2.4 adds 2 objects in one click while using Python Init functions and own...
- It worked in the 2.3.0-24 weekly build, at least.
I maybe should say that I am on x64. -
- Seb Radzimski wrote:
> OK now I know it is not only my problem. Is there any chance to fix it in 2.4 or maybe 2.6 QGI... -
- OK now I know it is not only my problem. Is there any chance to fix it in 2.4 or maybe 2.6 QGIS? For now I can try to...
-
11:32 PM Bug report #2113: curved labels: only a few are drawn
- Hi,
we like to understand if this problem is resolvable or not.
The solution proposed:
>As discussed on the mailin... -
- Here is a test file that I made up from start that I get the same error. I have added the NZ area coastline, a 200 mi...
-
- please attach a sample project with data.
-
- remove the .qix file (the spatial index) and it will be ok. Probably it got corrupted somehow.
-
- remove the .qix file (the spatial index) and it will be ok. Probably it got corrupted somehow.
-
09:37 AM Bug report #10921 (Closed): Polygons disapear when zooming in
- Hello,
I just installed 2.4.0 and I'm having an issue with a polygon shapefile that worked perfectly in 2.2.0.
In f... -
- I changed the title and description of the ticket, to be more clear.
For the second issue you should file a separate... -
- I changed the title and description of the ticket, to be more clear.
For the second issue you should file a separate... -
- I changed the title and description of the ticket, to be more clear.
For the second issue you should file a separate... -
- so it seems it is a small, annyoing regression.
-
- so it seems it is a small, annyoing regression.
-
- so it seems it is a small, annyoing regression.
-
- I think we should go for a general support of nn relations.
This would be started from the joining table.
As soon as ... -
- Basically what you want is to hide the FK back to the parent form (id: 3) and the label id_pipe if I understand corre...
-
> This made me think, so before running the clip operation (in the Processing toolbox) I made a select by location w...-
- Sample data is here
https://drive.google.com/folderview?id=0B8WLtz606XDdOTNkN0xhenVCX0k&usp=sharing
The error is c... -
- Sample data is here
https://drive.google.com/folderview?id=0B8WLtz606XDdOTNkN0xhenVCX0k&usp=sharing
The error is c... -
- Sample data is here
https://drive.google.com/folderview?id=0B8WLtz606XDdOTNkN0xhenVCX0k&usp=sharing
The error is c... -
- Sample data is here
https://drive.google.com/folderview?id=0B8WLtz606XDdOTNkN0xhenVCX0k&usp=sharing
The error is c... -
- Sample data is here
https://drive.google.com/folderview?id=0B8WLtz606XDdOTNkN0xhenVCX0k&usp=sharing
The error is c... -
05:13 AM Bug report #10909 (Closed): SVG images rendered as raster images
- Fixed in changeset commit:"7d30a7413b4d7ca678ad8e262bef365d78813248".
-
-
- Yes. In version 2.2 it worked as expected.
-
2014-07-20
-
08:17 PM Feature request #8006: Adjust print composer table columns with long text (or add "wrap on text" ...
- I'll add a +1 to this. I have site descriptions that I want to print on the second page of the map (back of the shee...
-
- I'm attempting to clip a shapefile of contours by a small study area. This will be a bit long - sorry: On Ubuntu-unst...
-
- Fixed in changeset commit:"ac005b96e2bed48555106128859bff9f2334fbb1".
2014-07-19
-
- I have the exact same problem for PostGIS layers, on Windows and on Linux.
And the problem is only because of the "Py... -
01:38 AM Bug report #10889: Silent installation hangs (under windows)
- I tried it on several pc with different O.S. (xp and vista) and different settings, but with the same result.
i have... -
- I recently upgraded my QGIS Desktop development version to 2.5 Master. c05e5e2
I noticed that one of my layers is wa... -
- After longer time upgraded QGIS to discover that attribute edit form does not autofocus the first field any more. Thi...
-
07:27 AM Bug report #4087: Split Features tool: lines are split also at every self-intersection
- I'm a new QGIS user and thought I was nuts until I found this bug report. I open a single GPX track in QGIS, convert ...
-
06:38 AM Feature request #10914 (Open): Comments in QGIS Query Builder
- When trying different queries in the Query Builder it would be a nice feature to comment them to see (quickly) the di...
-
- Can you please test with current master and verify that this fix works ok? If so I will backport it to 2.4.
-
- Fixed in changeset commit:"4e2afeb96182dafa8249131f023f0ea0e312883b".
-
- Fixed in changeset commit:"5a6f68bed4e786d2d80e0aca9024728e1f4bdbfc".
2014-07-18
-
12:32 PM Bug report #10844: Modeller, python error when removing an algorithm
- Yeah i try install to standard folder, also i try simple and advance install.
I think that "traceback.." error has s... -
- !https://issues.qgis.org/attachments/7661/Screenshot.png!
-
- Here is a demo project with a spatialite db.
-
- Here is a demo project with a spatialite db.
-
- n:n relations can somehow be handled in QGIS, but the UI (forms) is not very usable in its current form.
See attached... -
- It seems there is a problem with nested joins.
By nested joins, I mean layer A is joined to B which itself is joined ... -
- Martin - I'm guessing this is a MTR regression? I don't think anything changed in composer which could cause this.
-
- Martin - I'm guessing this is a MTR regression? I don't think anything changed in composer which could cause this.
-
- tagging this as a regression, not sure if it is known issue or if it has already been fixed in master.
-
04:26 AM Bug report #10911 (Closed): Attribute table in print composer
- When an attribute table with many rows and max. rows set to i.e. 20 is moved around, the value in "maximal rows" jump...
-
- When an attribute table is added to the print composer and atlas printing is on, it would be very helpful to have a b...
2014-07-17
-
10:22 PM Bug report #10909 (Closed): SVG images rendered as raster images
- When saving a map as pdf, svg markers (Layer properties > Style > SVG Markers) are rendered as raster images. The onl...
-
08:56 AM Feature request #10884: OSM data loaded with "Add Vector layer" can be incomplete
- Giovanni Manghi wrote:
> is this related with this
>
> #8878
>
> and this
>
> #8037 ?
>
No, those are pitfalls ... -
- is tis related with this
#8878
and this
#8037
? -
- is tis related with this
#8878
and this
#8037
? -
- is tis related with this
#8878
and this
#8037
? -
- is tis related with this
#8878
and this
#8037
? -
- is tis related with this
#8878
and this
#8037
? -
- is tis related with this
#8878
and this
#8037
? -
- With your test case, you are confusing the importer: amenity=school can be an area (or a point), but barrier=fence is...
-
- Giovanni Manghi wrote:
> Paolo Cavallini wrote:
> > Better backport it to 2.4 branch?
>
> #18a1c8a6360faf69a9b1bb962... -
- Paolo Cavallini wrote:
> Better backport it to 2.4 branch?
#18a1c8a6360faf69a9b1bb9620b75baa7f1319cd#commitcomment-7... -
- Giovanni Manghi wrote:
> Paolo Cavallini wrote:
> > Better backport it then?
>
> #43635e7cbd8df55745d336b5fef1b3cf27... -
- Paolo Cavallini wrote:
> Better backport it then?
#43635e7cbd8df55745d336b5fef1b3cf27c53258#commitcomment-7044544 -
- In the layer properties on Ubuntu (from UbuntuGIS Repositories), 90% of the SVG layer properties are white. There are...
-
08:11 AM Bug report #10907 (Closed): Mac OSX: unable to save on a network samba volume
- This issue is similar to what reported in #9358
When trying to save on a network volume hosted in a WinXP machine, t... -
07:59 AM Bug report #10905: QGIS crashes in Windows when opening a project that does work on Linux
- Note that I tested Gavin's project and it seems something in composer is causing it to crash. Traceback below:...
-
- Note that I tested Gavin's project and it seems something in composer is causing it to crash. Traceback below:...
-
- does you client use qgis master? if not, what happens if he opens the project with qgis master (that can eventually i...
-
- does you client use qgis master? if not, what happens if he opens the project with qgis master (that can eventually i...
-
-
06:18 AM Bug report #10895: Fields won't Save
- My coworker actually figured it out, but thank you for trying to help us out! I appreciate it!
-
- please attach sample data and exact steps on how replicate the issue.
-
- please attach sample data and exact steps on how replicate the issue.
-
06:18 AM Bug report #10904: postgresql table shows only 500 features when adding from "add vector layer" a...
- Giovanni Manghi wrote:
> > Yes, i try, but it is not a postgis dataset, so loading with "Add PostGIS layer" doesn't w... -
- Giovanni Manghi wrote:
> > Yes, i try, but it is not a postgis dataset, so loading with "Add PostGIS layer" doesn't w... -
> Yes, i try, but it is not a postgis dataset, so loading with "Add PostGIS layer" doesn't work...
if is not PostG...-
> Yes, i try, but it is not a postgis dataset, so loading with "Add PostGIS layer" doesn't work...
if is not PostG...-
> Yes, i try, but it is not a postgis dataset, so loading with "Add PostGIS layer" doesn't work...
if is not PostG...-
- first of all, my postgres version is 8.4 not 8.3.
I think, it is not a problem with the german "umlaute", because th... -
- first of all, my postgres version is 8.4 not 8.3.
I think, it is not a problem with the german "umlaute", because th... -
- first of all, my postgres version is 8.4 not 8.3.
I think, it is not a problem with the german "umlaute", because th... -
- Did it worked as expected in previous qgis versions?
-
- Did it worked as expected in previous qgis versions?
-
- Did it worked as expected in previous qgis versions?
-
- Did it worked as expected in previous qgis versions?
-
- duplicate of #10882
-
- duplicate of #10882
-
- Marcin Bochinski wrote:
> I'm sorry but I can't attach files. These are the company's files. But first error "Traceba... -
> There is a bug when running the scripts, it is the same one that happens with any of the scripts.
>
> _Algorithm ...-
-
- Duplicate of #10752?
-
05:40 AM Bug report #10894: Wrong Taudem parameter
- I just reinstalled QGIS, including removing my .qgis. Version is 2.4.0. I am using Windows 8.1 on a 64-bit machine....
-
- Duplicated in #10901?
It's a regression. -
- isn't this a regression since 2.2?
-
- from the window "layer order" layer properties is not accessible. You should use the "layers" window. Anyway... this ...
-
- from the window "layer order" layer properties is not accessible. You should use the "layers" window. Anyway... this ...
-
- of course this should be a local issue. Maybe something related to your local policies/permissions... Have you tested...
-
- the sql file does not contain any data, and does not seems to be possible to use it to restore the table in any other...
-
- the sql file does not contain any data, and does not seems to be possible to use it to restore the table in any other...
-
- Nyall Dawson wrote:
> It's an unfortunate API break in 2.4.
should this be tagged as blocker (as a regression)? -
- what we need is a project (with data) and precise steps on how replicate. Meanwhile you may want to try disable/unist...
-
- what we need is a project (with data) and precise steps on how replicate. Meanwhile you may want to try disable/unist...
-
- Antonio Locandro wrote:
> True, that is a workaround but then if layers are in different project CRS than project and... -
- The option is there (export symbology) but does not seems to apply to all formats, at least does not apply to shapefi...
-
- The option is there (export symbology) but does not seems to apply to all formats, at least does not apply to shapefi...
-
- The option is there (export symbology) but does not seems to apply to all formats, at least does not apply to shapefi...
-
- The option is there (export symbology) but does not seems to apply to all formats, at least does not apply to shapefi...
-
- The option is there (export symbology) but does not seems to apply to all formats, at least does not apply to shapefi...
-
- please try again on qgis master, the problem about CSV files has been solved and it may have solved also the one repo...
-
2014-07-16
-
01:36 AM Bug report #10904: postgresql table shows only 500 features when adding from "add vector layer" a...
- I can't reproduce this problem. i've tested with 400000 multipolygons (load via "Add Vectorlayer"). may be the proble...
-
- Jan Lippmann wrote:
> Have you tried via "Add PostGIS layer" to load the dataset?
Yes, i try, but it is not a postgi... -
- Jan Lippmann wrote:
> Have you tried via "Add PostGIS layer" to load the dataset?
Yes, i try, but it is not a postgi... -
- Jan Lippmann wrote:
> Have you tried via "Add PostGIS layer" to load the dataset?
Yes, i try, but it is not a postgi... -
- Have you tried via "Add PostGIS layer" to load the dataset?
-
- I tried to connect to a postgres database with over 130.000 datasets and only 500 where displayed in the canvas. This...
-
- I have been developing a project in QGIS Master (2.5) on Ubuntu with lots of edit widgets and drag and drop forms. Wh...
-
- Better backport it to 2.4 branch?
-
- Fixed in changeset commit:"18a1c8a6360faf69a9b1bb9620b75baa7f1319cd".
-
05:50 PM Bug report #8646: Python QgsRendererV2Widget not displaying on Windows 64 build
- Still seems to be an issue in version 2.4 on Windows 64bit
-
04:53 PM Bug report #10767: Simplified rendering causing boxes to appear instead
- Hi, the PR ( https://github.com/qgis/QGIS/pull/1509 ) fixes this bug.
Best Regards -
02:48 PM Feature request #10266: transportation network management
- Vincent chourmo wrote:
> I've started a github repo with some processing script for transit and traffic analysis.
>
... -
- Better backport it then?
-
-
- Please test if the fix really helped - I cannot replicate the issue locally...
-
- Fixed in changeset commit:"43635e7cbd8df55745d336b5fef1b3cf27c53258".
-
- When I tried to select all features in large PostGIS layer (definition in attachment), I experienced crash of Postgre...
-
- A quick fix is to rename the ogr_SOSI.dll file to something else so that ogr doesn't pick it up. The error is in tha...
-
06:16 AM Bug report #10746: Buzzer sound when the map is refreshing
- I have the exact same problem; buzz sounds when QGIS (2.4) refreshes the map. Sitting on a Dell Precision T5400 on Wi...
2014-07-15
-
01:28 AM Bug report #10901 (Closed): Map values in field definition disappeared in QML version 2.4
- If I define a "map values" (ie, a domain) on a field, associating a csv file in the panel "Fields" of "Properties"...
-
- Good morning,
trying to filter the entries of a "Value relation" with the extent of the current map canvas, I get ... -
01:18 AM Bug report #10887: Qgis return empty QgsComposition from standalone application
- Also this produces an empty result
myMapRenderer = QgsMapSettings()
myMapRenderer.setLayers(layerset)
com... -
- It's an unfortunate API break in 2.4. You need to pass a QgsMapSettings object to the constructor of QgsComposition. ...
-
- It's an unfortunate API break in 2.4. You need to pass a QgsMapSettings object to the constructor of QgsComposition. ...
-
- There seems to be no way now to make a field visible but not editable. The 'Immutable' widget has disappeared and unc...
-
- Works fine here. Please give more info about issue: which OS, QGIS and Processing versions are you use? Try to clear ...
-
- Works fine here. Please give more info about issue: which OS, QGIS and Processing versions are you use? Try to clear ...
-
- The number of processes parameter passed to mpiexec when running a taudem process is passed as a decimal, e.g. "2.0",...
-
- All or most widgets should have an 'allow NULL value' option but only some do.
At the moment if you use the date/ti... -
- Is this about agricultural fields? So you have a polygon layer and you digitize new features and they behave strang...
-
- After I draw a field into the Farm Fields layer of QGIS, I try to save changes to toggle editing, and the field disap...
-
- The plugin is installed under the Web menu.
Tickets against the plugin should be opened on the relative bugtracker, n... -
- The plugin is installed under the Web menu.
Tickets against the plugin should be opened on the relative bugtracker, n... -
07:09 PM Bug report #10897 (Rejected): Openlayer plugin not appearing when reinstalled in 2.4.
- I understand that the Openlayer plugin is auto loaded with 2.4.
Unfortunately I accidentally removed this plugin in o... -
02:19 PM Bug report #10896 (Closed): Layer properties doesn't work
- When I open a shape file i can't manage the layer properties. If I right-click on the shape file in the window "layer...
-
-
10:23 AM Bug report #10892: Missing explanation in "Could not draw" error message
- Error was produced in 2.2 while attempting to add google satellite imagery from openlayers to a map that already cont...
-
- Please include steps to reproduce. The string only appears in master and 2.4 in obsolete translations. It's active ...
-
08:40 AM Bug report #10892 (Closed): Missing explanation in "Could not draw" error message
- There really should be some explanation about what's going wrong:
"Could not draw Google Streets because" <and then ... -
- Autofilling the table name with the shapefile name should be improved, as now the default includes the whole path and...
-
-
05:38 AM Bug report #10752: Value Map not working when loading a qml
- There is a similar explanation to this bug on this link:
http://gis.stackexchange.com/questions/104403/how-to-save-a...
2014-07-14
-
12:53 AM Bug report #10890 (Closed): Unable to add non-cached WFS layer through Python API
- Adding a WFS layer (with iface.addVectorLayer) works without any problems when adding a cached WFS to the map canvas....
-
- After many minutes qgis silent installation hangs. I saw some process that never end.
* cmd.exe
* cmd.exe
* nircmd.ex... -
01:38 PM Feature request #10773: Processing: more meaningful error messages
- Please, notice that there are errors that are due to some wrong user interaction (like the one you mention with the G...
-
- Correction: DB Manager is apparently equally slow
-
- *Qgis 2.4 version return empty QgsComposition from standalone application*
QgsComposition empty from QgsMapRender... -
- also the reverse should be done: currently when applying a colour ramp to a raster, this gets stretched from min-max,...
-
02:28 AM Feature request #10886 (Open): relative color tables for raster data
- Hi,
I would nice, to be able to create relative color tables for raster data in QGIS and save them for other layers....
2014-07-13
-
- Giovanni Manghi wrote:
> > In the project file I'm attaching, the project is made of only one point vector "cities", ... -
> In the project file I'm attaching, the project is made of only one point vector "cities", which displays without p...-
-
- paolo prosperi wrote:
> Please reopen this bug as issues still occur as previously reported (see also by my original ... -
07:32 AM Bug report #7426 (Reopened): delete layer doesn't really delete it
- Please reopen this bug as issues still occur as previously reported (see also by my original bug report #7086).
I cha... -
- Please reopen this bug as issues still occur as previously reported (see also by my original bug report #7086).
I cha... -
- Fixed in changeset commit:"8650597b7f96e522a4a3a5c115a248a26fb9af97".
-
04:40 AM Bug report #10700: Scale dependent visibility of diagrams does not work
- I have this issue too, using the tutorial data and doing the follow along tutorial.
When Scale dependent visibility c...
2014-07-12
-
- Fixed in changeset commit:"4e62dde8586435a7b201ffc59cf9eecd68911536".
-
07:19 PM Feature request #6954: In Print Composer / Map item / Grid tab add option "Tick" to Grid Type
- The tick style would be very useful when used alongside the newly committed multiple grids feature.
-
- Yes, please :)
Few suggestions:
- the tick should be offered in two flavors: inner tick and outer tick
- the tick le... -
- Fixed in changeset commit:"ae84a0740399ea7b0e6baab8d2dce86f8b0a8ead".
-
- Duplicate of #6954
-
- Duplicate of #6954
-
06:16 AM Bug report #10885 (Closed): QGIS crashes when digitising, while avoiding intersections
- QGIS crashes when adding new polygons while 'avoid intersections' is switched on. Sorry, I am pretty new to this, so ...
-
- Attached is a sample of a real island with landuse polygon downloaded from the OSM API, or rather from http://gis.sta...
-
- It would be useful to add a timer to the SQL window, such as the one that exists in pgadmin. Sometimes DB Manager cra...
2014-07-11
-
- fixed in 877f07ab5dda4141c9cf420805ba431aae1d023d
-
- fixed in commit:e58a648
-
- Please have a look to dbmanager too.
-
- I am not an expert on that. But if you reccomend that change, it looks like an easy thing. I will look at SPIT to see...
-
- I have been waiting for this feature too.
-
- In QGIS 2.4 there is no option to set the default values(NULL) on date fields in QGIS 2.4 if we have not updated any ...
-
- Right now, the grids list feels disproportionately large when compared to the rest of the controls in that panel. As ...
-
- I'm flagging this as a blocker as it's a fundamental issue to this (cool!) new feature. Basically, the coordinate pos...
-
- *Steps to reproduce:*
# Open an already created project
# Create a new composer
# Add a map item, and in the grid se... -
11:55 AM Bug report #9604: Attribute table: the icons for "Unselect all" and "Delete selected features" ar...
- Here is yellow version "delete selected polygon"
!polygon-selected-delete.png!
http://trac.osgeo.org/osgeo/changeset/... -
- @Anita: With the current icons, the small inlet is really too small to fit a recycle-bin. I tried around a little bit...
-
- @Jan: The idea of the Arcgis icons is not bad but it would require changes to all the other select icons we are curre...
-
- Jan Lippmann wrote:
> @anita,
>
> what do you think about the color (RGB:0 255 255) for selectionbuttons?
> influenc... -
- I would prefer a recycling bin over a red x. Especially on mobile devices the recycling bin seems to be the design pa...
-
- @anita,
what do you think about the color (RGB:0 255 255) for selectionbuttons?
influences are not desirable from ar... -
- I agree with Nathan about the unselect icon. I also think the "delete" symbol in the delete icon should be much more ...
-
- Unselect is fine but in think it needs the cursor in there to link it to select. Still not a fan of the delete though
-
- @Robert +1 from me. It's good to have two very different icons for these two actions. Also, since it's kept in yello...
-
- True, that is a workaround but then if layers are in different project CRS than project and I want to reproject that ...
-
- I think that the options in
settings -> options -> CRS -> CRS for new layers
do pretty much what you ask -> if a la... -
06:58 AM Bug report #10878 (Closed): "Symbology export" does not work when saving as shapefile(?)
- *New description:*
in vector "save as..." dialog there in option "symbology export" that is active but does not seem... -
- If you have a repeating attribute on other tabs in the drag and drop attribute form, the attribute will not update on...
-
05:17 AM Bug report #10876 (Closed): Broken non-latin text attributes when doing Shapefile import in GRASS...
- When doing Shapefile import in GRASS (module v.in.ogr), all non-latin (cyrillic) text attributes appear to be broken....
-
04:38 AM Bug report #10866: Drop down menus in "Save vector file as" function appear to have incorrect sel...
- Ah ok, thank you. I didn't realize 2.2 was no longer supported. We haven't upgraded to version 2.4 yet, I just downlo...
-
- Charles Brooks wrote:
> Greetings Giovanni, I am unfamiliar with the bug tracking process. Did I submit this bug inco... -
- Greetings Giovanni, I am unfamiliar with the bug tracking process. Did I submit this bug incorrectly?
-
- I'm sorry but I can't attach files. These are the company's files. But first error "Traceback..." i have without any ...
-
- Marcin Bochinski wrote:
> yeah, I know. I tried this. Also I tried on a few computers. There is the same problem.
th... -
- yeah, I know. I tried this. Also I tried on a few computers. There is the same problem.
-
- maybe you have on old Processing version masking the new one, where this issue is fixed (works here).
Delete the fol... -
- Can you describe better the issue and the difference with older QGIS versions?
-
- Can you describe better the issue and the difference with older QGIS versions?
-
02:39 AM Bug report #10875 (Closed): Detecting and deleting interior rings
- Hello,
I'm actually using QGis 2.4 on Ubuntu 14.04. On another engine I'm still using the Version 1.8 and 2.0 of QGi... -
- I cannot confirm here, it works as expected on both Linux and Windows.
Can you add sample data?
2014-07-10
-
- The noise issue is known see #10746
About the other issue, can you attach sample data? Is this a regression since 2.2? -
- The noise issue is known see #10746
About the other issue, can you attach sample data? Is this a regression since 2.2? -
12:35 AM Bug report #10872 (Closed): Slow performance when panning and opening attritute table -Non Acsii
- Hi
Using 2.4 64 bit on Win 7.
We use Latin1
When I open an attribute table or pan there are a noise and performance... -
- When selecting in polygon it is usually yellow, or a color that one can choose in the options. It would be neat, if o...
-
-
- Just verified, the menus in questions are indeed different in version 2.4 and allow the expected behavior.
-
- When exporting layer data using the "save file as" function, the GEOMETRY drop down does not contain "AS_WKT" but con...
-
01:12 AM Bug report #10746: Buzzer sound when the map is refreshing
- I do not get the noise on Windows 8 and QGIS does not crash with SOSI files on Windows 8 - it is just a problem on Wi...
-
- hello,
another idea would be, if one is oriented to arcgis. i've added a screenshot with some selectiontools.
i thi... -
- Looks good to me.
-
- Proposal is here:
http://trac.osgeo.org/osgeo/changeset/11569
Main issue with those two icons was that they are too ... -
- Proposal is here:
http://trac.osgeo.org/osgeo/changeset/11569
Main issue with those two icons was that they are too ... -
- The option "adding to current selection" does not work.
Also "create new selection" does not work if there is alread... -
- Currently raster tables are not visible in the browser. They are in DB Manager.
-
11:11 PM Bug report #10865: Regression: FeatureForm inactive for new feature when opened from Python
- Jürgen Fischer wrote:
> Fixed in changeset commit:"11f197ee5bd3792f333cd9c5b8b8de19e0e07fab".
Hi Jürgen,
fix works, ... -
- Matthias Kuhn wrote:
> Not sure what's wrong and I'm lacking the time right now to look into it.
>
> For the moment,... -
- Fixed in changeset commit:"11f197ee5bd3792f333cd9c5b8b8de19e0e07fab".
-
- Not sure what's wrong and I'm lacking the time right now to look into it.
For the moment, please use the following m... -
- The featureForm opened via iface.openFeatureForm(layer, feature) is inactive for new features, Regression from 2.2
To... -
09:55 PM Bug report #10849 (Closed): Not importing directory '/usr/lib/python2.7/site-packages/mpl_toolkits'
- Yup, looks like it's an upstream issue (fixed in matplotlib master for now). Closed for invalid =)
-
- I was able to fix by copying the needed file from:
https://github.com/matplotlib/matplotlib/blob/v1.3.x/lib/mpl_tool... -
- Apparently the SRID is missing when attempting to batch import:
Algorithm Import into PostGIS starting...
Algorithm ... -
- The tool is far slower than the old SPIT plugin, to the point that it cannot be an effective replacement for large da...
-
- it would be good to put sensible defaults for schema name (either public or a dropdown) and table name (same as shp n...
-
- There are situations where you have several files to add to canvas but QGIS doesn't detect CRS for any reason. Often ...
-
09:55 AM Feature request #2724: Look for (like firefox)
- Oh yes. This would really complete QGIS as a competitor to MapInfo.
-
08:29 AM Bug report #10720 (Closed): QGIS server: embedded groups do not render in GetMap requests if leav...
- Fixed in changeset commit:"40d91457f6f069886c5ba1c28db1efb2ff4ccac7".
-
-
02:19 AM Bug report #10860: MMQGIS: joined attributes lose their column names in sort tool
- Sorry, this bug report is not valid as such. Actually mmqgis completely ignores any joined attributes. This could be ...
-
- Although QuickFinder does the job some tools should be added to core at some point especially heavily used ones. I al...
-
05:15 AM Bug report #10861 (Closed): Debian build failure
- I hoped it would be something simple. Did not see this new build dependency.
-
- Don't say that too loud please - our "nightly builds":http://dash.orfeo-toolbox.org/index.php?project=QGIS&date=2014-...
-
- Building from Master has failed very early in the process in the last few days:...
-
04:50 AM Bug report #10747: Cannot copy/paste points features
- I don't mean to start a wave of "me, too!" here, but I'd still like to mention that this issue also occurs when the s...
-
- I agree that some improvements could be made to snapping. I also think that it should have a icon in the editing tool...
-
- If confirmed fixed on other machines, yes
-
- I think that the auto-trace feature should be refined a little more and added to the standard editing toolbar of QGIS...
-
- Nyall Dawson wrote:
> Are they the only elements in your layouts? ( map, scalebar, legend, logos ?). No other items a... -
- Are they the only elements in your layouts? ( map, scalebar, legend, logos ?). No other items at all, like arrows or ...
-
- Hi.
I have a problem in QGIS 2.4 and Python Init functions working with UI form. In previus versions of QGIS everythi...
2014-07-09
-
- When using mmqgis to sort a layer by a given column, the tool creates a new shapefile. In this new shapefile any attr...
-
- The use case is that in a Python Init Script (layer properties, fields tab) I want to address a specific widget and c...
-
- Nyall Dawson wrote:
> One thing that would help track this down would be if you could try removing different item typ... -
- One thing that would help track this down would be if you could try removing different item types from the compositio...
-
- For each layout I deleted, QGIS got faster. So I think it's about the number of layouts and not the content.
My layou... -
- Per Gammerath wrote:
> I have 8 layouts, A4, A3, A2, A1, all with landscape and portrait orientation. I don't see ho... -
- I just finished a new plugin which will syncronize the map with composer. When it is approved I will update this issue.
-
- I still get segfaults with max_cores=2, when I have multiple CSV layers, one of which contains point geometry. It wo...
-
- Etienne Tourigny wrote:
> You mention openlayers plugin, if you remove the openlayers plugin and use max# or cores do... -
- Etienne Tourigny wrote:
> You mention openlayers plugin, if you remove the openlayers plugin and use max# or cores do... -
11:32 AM Bug report #10778: Crashes on zoom in-out
- You mention openlayers plugin, if you remove the openlayers plugin and use max# or cores does the crash happen? The ...
-
- Matthew Bush wrote:
> Mostly. It may still be related to the file size of the project, as the CSV layers I was worki... -
- Alessandro Ciali wrote:
> Have you tried to reduce the number of max core to use in multithreaded rendering (renderin... -
- Matthias Kuhn wrote:
> Cannot reproduce here (CSV provider, first two columns as X/Y)
you have to move the wheel mo... -
- Yes it seems QuickFinder does what I need. But it's very confusing and there's no help. You may close this issue, but...
-
-
07:20 AM Feature request #10853: Quick Search panel
- Hi,
Quickfind plugin does what you need. Can you confirm and close the bug if this is sufficient?
-
- At the moment we use the OSM-search plugin to navigate our maps. However, this plugin only works if you are online. W...
-
- closing?
-
- Seems to be working now (PostGIS 2.1.3)
-
- Lars Scharfenberg wrote:
> Yes, you're right, sorry if I didn't make it clear enough (English isn't my mother languag... -
- Léo Serre wrote:
> When digitizing you just have to press the backspace key on your keyboard when you're creating you... -
- Léo Serre wrote:
> When digitizing you just have to press the backspace key on your keyboard when you're creating you... -
- Looks like qscintilla just needed to be recompiled against pyqt4 after I downgraded.
Closing as invalid =) -
06:56 AM Bug report #10858 (Closed): Datasource file name in .qlr file should be relative to .qlr file
- When reading a .qlr file the file name in the datasource is currently interpreted relative to the directory QGIS was ...
-
05:13 AM Bug report #10855 (Closed): "Expand all" and "Collapse all" disappeared from context menu in the ...
- I do not know if it is a bug or a decision made, but these functions are really needed back for projects with numerou...
-
05:03 AM Bug report #10854 (Closed): No tools when using "Simplified interface" in Processing toolbox
- Windows 64 bit - 2.4
Also reported on the mailing list as affecting:
"Same Bug on Ubuntu 12.04 using ubuntuGIS Reposi... -
- Seems OK now
-
- Confirmed on 2.4
2014-07-08
-
01:26 AM Feature request #10829: Composer: allow define grid spacing using Degrees, minutes and seconds.
- Yes, you're right, sorry if I didn't make it clear enough (English isn't my mother language). In ArcGIS you're able t...
-
12:36 AM Bug report #10778: Crashes on zoom in-out
- Have you tried to reduce the number of max core to use in multithreaded rendering (rendering tab on option window)? I...
-
- Giovanni Manghi wrote:
> so your case seems to fit #10744
Mostly. It may still be related to the file size of the pr... -
- Matthew Bush wrote:
> If I remove the CSV files, then there's nothing left except google maps from the openlayers plu... -
- If I remove the CSV files, then there's nothing left except google maps from the openlayers plugin.
I created a new ... -
- Matthew Bush wrote:
> I'm having a similar issue on Fedora 20 x64, running QGIS 2.4.0. The project I'm working with _... -
- See also http://lists.osgeo.org/pipermail/qgis-developer/2014-March/031794.html
-
12:33 AM Feature request #10851: Delete last point when digitizing
- When digitizing you just have to press the backspace key on your keyboard when you're creating your shape.
-
12:30 PM Feature request #10851 (Closed): Delete last point when digitizing
- When digitizing any line or polygon feature, one often clicks at the wrong place and wants to redo the last point bef...
-
- Self referencing relations (= same layer for referencing layer and referenced layer) are not working. QGIS eats 100% ...
-
- *I'm seeing a python warning in the Log Messages panel when starting QGIS for Linux, but it starts fine so not sure w...
-
09:08 AM Bug report #10747: Cannot copy/paste points features
- I'm also having the same issue as Brett Z and Pinuccio. The only work around I've found is to "Save as" the points yo...
-
08:42 AM Bug report #10747: Cannot copy/paste points features
- I have the same issue. You can reproduce it by creating 2 new POINT shapefiles, adding points to each, and saving. Th...
-
07:09 AM Bug report #10848 (Closed): GPS Tools: Creation and/or Edition of a GPS layer (gpx file)
- Hi,
When a GPX file is edited in QGIS (opened from GPS tools), its structure changes drastically and is not recogni... -
- It seems that the parsing works differently for query layers when compared with normal queries (an extra ; is added a...
-
06:47 AM Bug report #10818: qgis crash on delete of rectangle in composer
- From the description, that looks exactly like what's needed. I see it's not actually released and doesn't look like ...
-
- If I'm right about the fact that Layouts slow down the loading of projects, would it be reasonable to let QGIS skip t...
-
- Giovanni Manghi wrote:
> Per Gammerath wrote:
> > Hmmm, just added all the composer layouts, and now everything is sl... -
- Giovanni Manghi wrote:
> > In the proces of building the new project file, QGIS crashed more than 20 times, just from... -
- Per Gammerath wrote:
> Hmmm, just added all the composer layouts, and now everything is slow again. So maybe this is ... -
> In the proces of building the new project file, QGIS crashed more than 20 times, just from organizing layers and l...-
- Unfortunately it didn't work. In the qml structure saved by 2.4, the parts of the xml code where the value lists were...
-
- Oops, sorry. I found it.
-
- Giovanni Manghi wrote:
> as far as I can see is still there
Can you point it out for me? -
- as far as I can see is still there
-
- as far as I can see is still there
-
- What happened to Point Displacement? Has the feature been removed from the core?
-
- hello,
two ideas:
1.
It would be useful, if i can toggle between "select all" and "unselect all" layers in the... -
- fixed here
#d8eee4e56a42074549a0a941ac7d2835ef307ff1 -
- fixed here
#d8eee4e56a42074549a0a941ac7d2835ef307ff1 -
- please ask questions in the users or developers mailing lists (or on http://gis.stackexchange.com)
-
- please ask questions in the users or developers mailing lists (or on http://gis.stackexchange.com)
-
- -----------------------
*New description:*
in QGIS 2.4 edit the attach model and try remove the "list unique values... -
- duplicate of #10747
-
- duplicate of #10747
-
- see also #10778-7
2014-07-07
-
- Hmmm, just added all the composer layouts, and now everything is slow again. So maybe this is all about composer layo...
-
- I have been suspecting our project file of being messy and siltet, so I built a new project file and styled it to loo...
-
- I had to change the data source path in your project but after that I can confirm your observation:
* in qgis 2.2 qg... -
- I had to change the data source path in your project but after that I can confirm your observation:
* in qgis 2.2 qg... -
- I had to change the data source path in your project but after that I can confirm your observation:
* in qgis 2.2 qg... -
- https://drive.google.com/file/d/0B8lAQWa28EprMVJSdDhVazNJLVE/edit?usp=sharing
-
- Per Gammerath wrote:
> I can't upload the project. The file is 12MB.
dropbox (or similar)? -
- Yes, Multicore rendering is enabled. Rendering is very good once the project is loaded.
-
- I can't upload the project. The file is 12MB.
-
- Have you enabled multicore rendering?
Settings -> Options -> Rendering -
- Here is my project.
-
- it may be a bug, but anyway without attaching a project (and data) to replicate the issue it would be hard to trouble...
-
- it may be a bug, but anyway without attaching a project (and data) to replicate the issue it would be hard to trouble...
-
- In QGIS 2.4, i am unable to set the default value as NULL if i have not updated any value on date fields. Its automat...
-
- Fixed in changeset commit:"1691014069beba7b88e2627da9e07fd288d9991e".
-
08:29 PM Feature request #10840 (Closed): Remove the SQL Anywhere data provider/plugin
- The SQL Anywhere data provider has not been well tested with changes to the data provider API in recent versions. Th...
-
- duplicate of #9672
-
- duplicate of #9672
-
06:29 PM Bug report #10838 (Closed): Cannot run Python Console
- This bug was described at one of the local gis forum. I cannot reproduce it because I don't have Windows machine.
<p... -
10:33 PM Feature request #10806: Attribute table: add option to allow only "correct" name of the head tables
- For me it would have been great had intercepted the QGIS since a lot of time on it to recite a follow-up to find the ...
-
- I'm not sure I follow how this is a bug for us. If they don't allow spaces don't create a field with spaces. There i...
-
11:21 AM Feature request #10806: Attribute table: add option to allow only "correct" name of the head tables
- It is not a Geoserver only "issue". Spaces are not allowed in MapServer either for layer names :
http://mapserver.org... -
- Jirko Mattat wrote:
> It happens when QGIS desktop attribute table, the create a new vector layer.
> In my opinion, i... -
- It happens when QGIS desktop attribute table, the create a new vector layer.
In my opinion, it is useful to intercept... -
- Please specify exactly what you are doing, what's going wrong and what would be the expected result.
-
07:56 PM Bug report #10839 (Closed): paste point features not working
- I cannot copy and paste features into an existing point shape file. The error I get is 'OGR error creating feature -5...
-
- I'm having a similar issue on Fedora 20 x64, running QGIS 2.4.0. The project I'm working with _does_ have csv files w...
-
- Duplicate of #9427
-
- Duplicate of #9427
-
- Open a composer and add two or three maps.
Then, add a scale bar or a legend. These items have a property named Map ... -
11:12 AM Bug report #8857: sip: Unable to find file "QtCore/QtCoremod.sip"
- 2.0 branch builds for me too now. I do have "python-qt4-dev" installed indeed.
-
- sip was updated the other day and now it compiles fine - I'll post error messages in the future, thanks =)
-
- It would be really nice if the Print Composer supported multi core rendering like the map canvas does.
This would sp... -
- Looks like the processing plugin is broken in QGIS 2.4 when running QScintilla 2.8.3 on Linux.
There is an error on ... -
- I would say it is a regression.
-
- I would say it is a regression.
-
- In 2.2 I was able to select multiple layers in the table of contents using shift or ctrl, then click on a single chec...
-
- I really like how quickly features are rendering on screen when multiple cores are enabled for QGIS 2.4.
I noticed t... -
- the equivalent tool in ftools allows it.
-
- > Which means that the area calculation should be the same no matter what project CRS is set and also should be corre...
-
- Lars Scharfenberg wrote:
> I already know about the possibility to add labels in DMD format (forgot to mention this i... -
- Lars Scharfenberg wrote:
> I already know about the possibility to add labels in DMD format (forgot to mention this i... -
- I already know about the possibility to add labels in DMS format (forgot to mention this in the request), but the pro...
-
- An Option to add map labels to the map grid in the print composer in degree - minute - second format for geographical...
-
-
- Nyall Dawson wrote:
> Actually looks like there's a hard limit of 32767 for either the width or height. Neither dimen... -
- fixed here
#4df7b3464a8a1e1e40e199fad6994e98a2e7b825 -
- fixed here
#4df7b3464a8a1e1e40e199fad6994e98a2e7b825 -
- Antonio Locandro wrote:
> Had this issue right now, in 2.2 it happens if Print as Raster option is selected, it just ... -
- When you add that shapefile to QGIS the programs will add a new custom CRS, it says it clearly in the log
@Saved use... -
- ticket #10815 is about a different thing: expression in rule based symbology are written in a wrong way, at least whe...
-
- This is what I see (please correct me if I'm wrong):
*categorized renderer*
* in the normal categorized renderer I ... -
- This is what I see (please correct me if I'm wrong):
*categorized renderer*
* in the normal categorized renderer I ... -
- This is what I see (please correct me if I'm wrong):
*categorized renderer*
* in the normal categorized renderer I ... -
- This is what I see (please correct me if I'm wrong):
*categorized renderer*
* in the normal categorized renderer I ... -
- This is what I see (please correct me if I'm wrong):
*categorized renderer*
* in the normal categorized renderer I ... -
- will do, but won't have time until late tonight, so, will check in a day from now. Thanks
-
- Tom Grundy wrote:
> ok - do you know of a good way to modularize / export the whole thing since it has references to ... -
- ok - do you know of a good way to modularize / export the whole thing since it has references to shapefiles at absolu...
-
- Tom Grundy wrote:
> sure - it's meant to not be visible except as a mask, so, it won't show up until it's outlined wh... -
- sure - it's meant to not be visible except as a mask, so, it won't show up until it's outlined when selected by cycli...
-
- Tom Grundy wrote:
> wall_map is the composer in question.
I can't see that "small solid white rectangle with no bord... -
- wall_map is the composer in question.
-
- Tom Grundy wrote:
> operator error, sorry about that, try this one.
there are many layouts in your project, what it ... -
- operator error, sorry about that, try this one.
-
- Tom Grundy wrote:
> sorry, I tried to attach the wrong file. It's attached now:
I can't see the qgis project file i... -
- Arthur Vignacq wrote:
> Still have this problem even worse with 2 wrong and fake scale in the composer ...
> I've att... -
06:19 AM Bug report #10322: Scalebar bug in print composer
- Still have this problem even worse with 2 wrong and fake scale in the composer ...
I've attached project and composer... -
- Still have this problem even worse with 2 wrong and fake scale in the composer ...
I've attached project and composer... -
- * confirmed on Windows and Linux
* on Linux it seems to happen only if qgis is configured to render raster with the ... -
- * confirmed on Windows and Linux
* on Linux it seems to happen only if qgis is configured to render raster with the ... -
- * confirmed on Windows and Linux
* on Linux it seems to happen only if qgis is configured to render raster with the ... -
- * confirmed on Windows and Linux
* on Linux it seems to happen only if qgis is configured to render raster with the ... -
- * confirmed on Windows and Linux
* on Linux it seems to happen only if qgis is configured to render raster with the ... -
05:01 AM Bug report #10832 (Closed): Bad Allocation when opening raster properties
- Afternoon,
When trying to change the properties of the raster file (attached) I only ever receive a 'Bad Allocation'... -
- I still get the noise today with updated gdal-sosi.
For me, when the noise occurs its a sure sign that QGIS will clo... -
- Fixed in changeset commit:"0954ec3e8672bad517701a9cc4c6f4c8907f7099".
- 04:13 AM Bug report #10824 (Closed): Merge Select and Select by Rectangle tool
- Fixed in changeset commit:"f4a51c43345846694b02058569d48df960e2a0d3".
-
- I'm sorry, but I can't understand the issue. Can you explain again? thanks!
-
- I'm sorry, but I can't understand the issue. Can you explain again? thanks!
-
- I'm sorry, but I can't understand the issue. Can you explain again? thanks!
2014-07-06
-
- I don't know whether to report this as a bug or feature request, but QGIS is horribly slow at loading projects. What ...
-
- Since 2.4, if you press 'S' you can see the rendering time on the bottom (usefull to compare multithreading). But you...
-
11:01 PM Bug report #8857: sip: Unable to find file "QtCore/QtCoremod.sip"
- Donovan Cameron wrote:
> I can't get QGIS 2.4 to compile and get this error too on Arch Linux x86_64.
>
> sip 4.16.1... -
- Actually looks like there's a hard limit of 32767 for either the width or height. Neither dimension can exceed this s...
-
- Actually looks like there's a hard limit of 32767 for either the width or height. Neither dimension can exceed this s...
-
- Actually looks like there's a hard limit of 32767 for either the width or height. Neither dimension can exceed this s...
-
- This was implemented some time ago - composer outputs can now include an optional world file containing georeferencin...
-
- This was implemented some time ago - composer outputs can now include an optional world file containing georeferencin...
-
- Is this a QGIS desktop attribute table, QGIS desktop field calculator, a QGIS server or a geoserver problem?
-
12:13 PM Bug report #10826 (Closed): QGIS Desktop 2.4.0 network access error with Comodo Internet Security...
- QGIS Desktop 2.4.0 unable to access network with Comodo Internet Security Firewall
BUT QGIS Browser 2.4.0 works fine ... -
10:58 AM Feature request #10825 (Open): wheel zoom using predefined scales
- I have background maps from tile-services. These only look nice at predifined zoom-levels, which I have set in the "o...
-
- Both tools do the same actions when single clicking so they will be merged into a single "Select Features" tool.
2014-07-05
-
12:57 AM Feature request #10822 (Reopened): Print composer - allow tiled raster image exports for large re...
- That is the thing, that i have a 64 bits version
-
- That is the thing, that i have a 64 bits version
-
- You'll need to use a 64 bit build of QGIS to export an image that large.
-
- You'll need to use a 64 bit build of QGIS to export an image that large.
-
- Please try a lower resolution papersize
I need to print 40000x35000 pixels images, i have 8 GB of RAM, and the image... -
- I'm pretty sure I found the problem: It's the *LecoS plugin*. And it seems that it's not enough to disable the plugin...
-
- sorry, I tried to attach the wrong file. It's attached now:
-
- here it is, thanks for taking a look. I'm curious if just the project file alone would be enough since that's where ...
-
- Unless you're doing something fancy like data defined symbology in the rectangles try sending it with the broken laye...
-
- Interesting question, it references a lot of layers that are external to the project directory, is there a quick way ...
-
- adding the project that causes the crash would help the troubleshooting.
-
- So far this is repeatable on two out of two tries. In composer (2.4.0) I have a map with many objects - maybe 30 rec...
-
-
- Nathan Woodrow wrote:
> I have track this down to a error in the ogr_SOSI plugin.
Please test gdal-sosi-1.10.1-2 in ... -
- Submitted on behalf of Therese Forsyth
Testing QGIS 2.4 with area calculations. File used attached.
> I had a veg ... -
- I have a map that is rotated 1.6 degrees in composer, and it has a lot of point layer markers (svg icons) on it that ...
-
11:27 AM Bug report #10819 (Closed): markers drawn on wrong side of edge of rings with when draw marker li...
- When using _marker line_ and _line offset_ the markers are drawn inside the ring (and not outside, as it should be). ...
-
- If you make a gradient, and you put to have multiple stops, and you just select one entry, you will not see the true ...
-
- yes you can, in the style manager.
-
- yes you can, in the style manager.
-
- Now we can only create a gradient, but not edit a existing gradient.
-
- If i choose refine by category, then the CASE ELSE is working, even with
CASE WHEN "pntcnt" >= 50.1000 AND "pntcnt"... -
- This is strange, doing a query like this works
CASE WHEN ( "pntcnt" <100.1 ) THEN "pntcnt" END
But searching for ... -
- This is strange, doing a query like this works
CASE WHEN ( "pntcnt" <100.1 ) THEN "pntcnt" END
But searching for ... -
- Yes it is implemented, i discovered it now
CASE WHEN "pntcnt" <50 THEN "pntcnt" END
Thanks for the quick reply -
- #10479
-
- #10479
-
- That isn't doing what you expected it to. What you are doing there is making a range based on the results from the ex...
-
- *new description:*
#10815-7
------------------
*old description:*
Expected result . To filter only the nu... -
- But this only work for <
if you try = or > is not working -
- I had the same poblem and i was able to do this using the CASE conditionals
CASE WHEN "pntcnt" <50 THEN "pntcnt" ... -
- For now we have to manually select all the setting , the RGB
If you have the Hex-values you have to manually select ...
2014-07-04
-
01:39 AM Bug report #10244 (Closed): "Join Attributes Tables" returns wrong results if input layers have a...
- Fixed in changeset commit:"228892cfa7eb8b8fe0398775e9302016092f303e".
-
- Delimited text layers seem to be listed in the layer list.
I sent a pull request to fix this issue and improve the Jo... -
- Hi dev, while importing my alg with a multiline string parameter, I have :...
-
- I have track this down to a error in the ogr_SOSI plugin.
!http://i.imgur.com/3qZq7Jg.png!
If you remove the plugin... -
- Please ask questions on the qgis developer mailing lists.
-
- Please ask questions on the qgis developer mailing lists.
-
08:29 PM Bug report #10812 (Closed): How to deploy an qgis application
- Dear Mr/Ms.
I have develop an QGIS application based on 2.0 version. I use postgresql 9.3 as my database.Now I m... -
05:49 PM Bug report #4013: Large Projects: add limitations to the manual
- Grr, something off with my Mac. Compiled on this Mac, OS X 10.8, with 10.7 SDK. Won't load > 84 shapefiles. Same p...
-
03:06 PM Bug report #4013: Large Projects: add limitations to the manual
- William, I tested with 150 separate shapefiles, via your double-clicked 2.4 release install, to make sure repetitivel...
-
- William Kyngesburye wrote:
> It partially works now. It works when I build a debug QGIS, but does not work when buil... -
- William Kyngesburye wrote:
> ... I noticed that non-debug messages are not getting to console any more. ... but is on... -
- sylvain pierre wrote:
> This property value is set by scanning *all_col_privs* oracle view which in my case is totaly... -
06:54 AM Bug report #10374: moving object function disabled with Oracle provider
- Another clue:
I think issue relies on QgsVectorDataProvider::ChangeGeometries property (I'm not a C++ expert;-))
This... -
- With french translation, properties are:
"Ajouter des entités, Supprimer des entités, Changer des valeurs attributair... -
- Does "Editing capabilities of this layer" in the meta data page of the layer's properties include "Change Geometries"...
-
- Open the attached shapefile, which was generated by QGIS and hence has valid prj and qpj files that QGIS should recog...
-
- please choose larger tolerace...
how do i choose a larger tolerance, i don`t have any options -
- probably because of the bad formatting that i was receiving
-
- it was because of the overpass api bad query request
https://github.com/drolbr/Overpass-API/issues/119#issuecomment-... -
- it was because of the query to overpass api, now is working https://github.com/drolbr/Overpass-API/issues/119#issueco...
-
02:12 AM Feature request #3136: Update NZ projections for grid transformation support
- by the way, the 7 term transform is the default probably because things go weird once you go beyond the edge of the g...
2014-07-03
-
- If you create a vector layer in new fixed data on the attribute table, the name of the attribute must be no spaces.
W... -
- https://www.dropbox.com/s/n4s6q9qtaajkl4h/leisure_overpass_geojson.rar
-
- anything that can be downloaded somewhere?
-
- not sure if bug or i just try to load a file that is just too big
-
-
- Antonio Locandro wrote:
> I had this issue today, I can't export a map to PDF just consisting of a CSV with about 300... -
- I had this issue today, I can't export a map to PDF just consisting of a CSV with about 3000 points (no labels)and an...
-
- Steps to reproduce (hopefully):
# Create project with two layers linked by relation in QGIS 2.2. Add relation to drag... -
- please raise the issue also on the developers mailing list, if not already. Thanks!
-
01:14 PM Bug report #10800 (Closed): Datum Transformation with target_crs_code different than 4326 gives h...
- I've been doing some tests and found that, using a different target_crs_code than 4326 (wgs84), Datum Transformation ...
-
- this does not seems replicable with common formats (shapes, postgis) and column types.
Can you attach a sample datas... -
06:46 PM Bug report #10804 (Closed): Vector Layer categorised style problem
- Vector layer, layer properties, style, categorized
When you classify using a text field the value and label in the c... -
- Still true in latest master.
Seems this method does not work as expected for almost all renderers:
* QgsSingleSymbol... -
- Ah ok, then it's a duplicate of #10781
-
- I think you are not understanding my issue because I did not explain well enough. I would like a toolbar button simi...
-
- It's already possible - there's a refresh button on the composer toolbar which does this. If you'd like map changes a...
-
- It's already possible - there's a refresh button on the composer toolbar which does this. If you'd like map changes a...
-
- It would be nice to be able to update the map view in Composer with the click of a button on the toolbar or even have...
-
- As the options in Options -> Map Tools -> Measure tool are really just display only options they should be moved to t...
-
- Why i would find this interesting, because we don`t have a default style for OSM poi data.
We know how the data will... -
- Antonio - how large is your composition and what resolution are you exporting it in? Are you using the 64 bit windows...
-
- Had this issue right now, in 2.2 it happens if Print as Raster option is selected, it just creates the name of the fi...
-
- Hi André,
I leave here the insert sentences for tfm 1984 and 1988, with 4803 as source_crs_code. ... -
- The CRS mentioned are based on the geographical CRS EPSG:4803 Lisbon(Lisbon), using the prime meridian of Lisbon.
Th... -
- I tested after looking the notes in the old tickets about this issue, and it seems ok to me on 2.4
-
09:37 AM Bug report #10799 (Closed): Measure ellipsoid should be set when the project CRS is not a PCS
- When a project with a GCS (e.g. WGS84) has OTF off it's not possible to select the measure tool ellipsoid, and it is ...
-
- confirmed on Linux too.
-
- confirmed on Linux too.
-
- https://www.dropbox.com/s/b7sb0zvg1oqbo83/1%20ora%20shop%20overpass.zip
-
- baditaflorin - wrote:
> i get the same result,only one polygon
>
> If you want the same file that i am using, you ca... -
- i get the same result,only one polygon
If you want the same file that i am using, you can overpass and get the file ... -
07:26 AM Bug report #10026: Postinstallation fails
- Jürgen Fischer wrote:
> That's because even before that @OSGEO4W_ROOT@ is empty. Really odd. Is your environment ex... -
- jamaa jamaa wrote:
> even before that, the command @call "\\bin\\make-bat-for-py.bat"@ fails because it cannot find t... -
- Andreas Braun wrote:
> jamaa jamaa wrote:
> > here is my postinstall.log
>
> Thanks for posting. As in my case, the ... -
06:19 AM Bug report #10026: Postinstallation fails
- jamaa jamaa wrote:
> here is my postinstall.log
Thanks for posting. As in my case, the "textreplace" command is not ... -
- here is my postinstall.log
-
- I didn't save the project. I just started a new project and added all the Alaska shapes. Like I said, I'm sure it wil...
-
- Per Gammerath wrote:
> I just tried with the Alaska sample dataset, and I could easily make it crash too by zooming v... -
- I just tried with the Alaska sample dataset, and I could easily make it crash too by zooming violently. So I'm quite ...
-
06:52 AM Bug report #10756: Minidump on closing QGIS 2.4
- Same here. Win7 64 bit & QGIS 2.4
-
- I found this on two machines (both Win7 Pro 64) and note that Miroslav, above, also reports the same issue. Any ideas...
-
- Micha Silver wrote:
> I tried with all plugins disabled (I did *not* try to uninstall them), and the problem still re... -
- I tried with all plugins disabled (I did *not* try to uninstall them), and the problem still recurs. Open QGIS 2.4, 6...
-
- Fixed in changeset commit:"2f5d118d4d6cb4de7e355d5069323121681ae4b3".
-
- While downloading a model (Model within a model) I get an error[0].
I think there are two issue here:
* the model is ... -
- The modeller has a minor issue: when zooming in, when items get close to the window border, the lines connecting the ...
-
- I've added screencast which showing the problem.
-
- if i digitise a new multipolygonfeature in a MSSQL-Multipolygonlayer (with avoid intersections of new features) and *...
-
- In the new modeler, I can't add an algo with a ParameterFile :...
-
- i have a 600 mb osm file that i am trying to import the polygons, so i can get the polygon centroid.
form that file ... -
- thanks! that was fast!
-
- Fixed in changeset commit:"144f7eca8fc8c3098b3c07acb8264868d661cd60".
-
- The file where imported via Openstreetmap import topology, not sure if error at import or error at export to spatialite
-
- i confirm that is working, sorry
-
- While the print composer is a powerful tool, it is also a demanding process to get a final print. The user has no cha...
-
- hmm, I do not undertand how you use the modeler and python code at the same time... Could you add the model itself an...
2014-07-02
-
- Per Gammerath wrote:
> It does not include any CSV files. I'm not sure if I can attach the project/data as the size r... -
- It does not include any CSV files. I'm not sure if I can attach the project/data as the size reaches 92MB. QGIS only ...
-
- does the project includes CSV files added as points layers?
can you attach a sample project/data? -
- does the project includes CSV files added as points layers?
can you attach a sample project/data? -
- does the project includes CSV files added as points layers?
can you attach a sample project/data? -
- QGIS crashes when I zoom in and out in a fast motion. I have enabled multicore rendering.
-
- If I have understand well the automatic translation: this was a known issue that was supposedly solved but I'm not su...
-
- If I have understand well the automatic translation: this was a known issue that was supposedly solved but I'm not su...
-
- If I have understand well the automatic translation: this was a known issue that was supposedly solved but I'm not su...
-
- please file tickets in English.
-
02:18 PM Bug report #10784 (Closed): topology errors when digitizing
- new description (google translate):
When you are digitizing seamlessly abutting polygons produced QGIS 2.2 despite a... -
- if you are using 2.2 like in the other osm related ticket, please test 2.4 and see if it is confirmed.
-
- I have imported a 400 mb osm file that i have get from JOSM Overpass API, and i try to export the polygons, but it do...
-
- Hi,
that basic feature is missing and can be very usefull from times to times..
Régis -
- from the screenshot you are using qgis 2.2
on qgis 2.4 with the very same query there is no error, please update and... -
- from the screenshot you are using qgis 2.2
on qgis 2.4 with the very same query there is no error, please update and... -
- is a geojson file, i have attached it with the name meta.zip, i open just the lines, when i go to the query and i wan...
-
- I totally agree. Printing out a map is not an easy task for novice users when the print composer doesn't automaticall...
-
- Current behaviour one has to manually click set to map canvas extent, an option to sync both would be a nice addition...
-
-
- It seems that the overhaul of the modeler in master has 1 bug. If I try to run a small model with two clip operations...
-
- Please try removing/disabling all installed pluguins, restart QGIS and try again.
-
10:26 PM Bug report #10756: Minidump on closing QGIS 2.4
- Same here, affected both 2.4 and 2.5 Master. All it takes is open and close QGIS and it come up with crash. Both thro...
-
- When i import the osm files, there is a lot of hidden information that could also be included when we are saving to s...
-
05:28 PM Bug report #10746: Buzzer sound when the map is refreshing
- Here it is:
https://www.dropbox.com/s/fft2fq3r1eyv2z3/Sample_10746.zip
You can hear the buzz sound by opening the a... -
- Can we have some sample data?
-
- Was able to reproduce on 3 different machines :
If a layer (SHP, TAB) is within a folder with special character (for... -
- No other applications running crazy at the same time.
I had the reflect to log this issue because my project used to... -
- This my code :...
-
- can you provide an example of a model where you have that problem? I do not understand what the issue is exactly
Tha... -
- Hi,
In the modeler, ParameterString return a "None" value as unicode, not as NoneType.
I guess you want to return an ... -
- implemented in master.
-
- implemented in master.
-
- duplicate of #10758
-
- duplicate of #10758
-
09:32 AM Feature request #10782 (Closed): Drag-and-drop from one QGIS instance to another
- It would be nice to be able to drag and drop a group or layer(s) from one running QGIS project to another.
-
-
- It seems to be that this is partially enabled? You can toggle Coordinates/Extents so maybe just the precision needs t...
-
-
- Done! #10779 Request added
-
- Based on #10658
"Layer name could be the name in a postgis table for example, displayed as I would say should work m... -
- Confirmed,
Every time you add a geoJSON layer via add vector command to map canvas the default layer name is OGRGeoJ... -
- I will try it, the model I have is small so it should be easy to remake.
PS, I will try on the subjects but it gets ... -
- The modeller have been already overhauled in qgis master (after 2.4 was released), it may be worth to re-test there b...
-
- The modeller have been already overhauled in qgis master (after 2.4 was released), it may be worth to re-test there b...
-
06:43 AM Bug report #10762: 2.4 build failure with old gcc
- More are needed, apparently for all occurences of Ctors inheriting from QgsConnectionPoolGroup...
-
- Ah - I see in the QT-section of the protocol a message:
QAction::eventFilter: Ambiguous shortcut overload: F5
I fou... -
- it seems to work ok here on Linux/KDE.
-
- The "F5" keyboard shortcut does not reload the canvas.
Tested on Win7 64bit QGIS 2.4 -
- attach the postinstall.log please
-
- Also affects Version 2.4.0 on Windows 7 (QGIS-OSGeo4W-2.4.0-1-Setup-x86_64.exe)
-
- you have two kind of transparency in qgis 2.x: the layer transparency and the symbol transparency. If you use the fir...
-
- you have two kind of transparency in qgis 2.x: the layer transparency and the symbol transparency. If you use the fir...
-
03:07 AM Bug report #10597: [errpr] buffers 1.8 vs 2.2
- Now I see what really happend.
Buffer creating OK, this is rendering / view problem.
qgis 1.8 shows overlayed elemen... -
- please see #10769-1
the fact you can get that message does not means that the module is broke (in QGIS). You must ... -
- please see #10769-1
the fact you can get that message does not means that the module is broke (in QGIS). You must ... -
- please see #10769-1
the fact you can get that message does not means that the module is broke (in QGIS). You must ... -
- I guess that potentially any tool can throw a different error, catching all them and returning a specific error messa...
-
- I guess that potentially any tool can throw a different error, catching all them and returning a specific error messa...
-
- I guess that potentially any tool can throw a different error, catching all them and returning a specific error messa...
-
- I guess that potentially any tool can throw a different error, catching all them and returning a specific error messa...
-
- Is there a particular reason why you think that running as root would have changed something?
The main reason I can ... -
- I see that you are using master, does this happen also on 2.4?
-
- I see that you are using master, does this happen also on 2.4?
-
- I see that you are using master, does this happen also on 2.4?
-
- The module works fine, just tested on both Window and Linux. Try the attached dem for example.
The fact that you get... -
- The module works fine, just tested on both Window and Linux. Try the attached dem for example.
The fact that you get... -
- The module works fine, just tested on both Window and Linux. Try the attached dem for example.
The fact that you get... -
- Antonio Locandro wrote:
> is a shame
qgis development is user driven, if someone will really need this option I gu... -
02:00 AM Feature request #10764: Python API to handle layer groups without iface
- Thank you Martin.
I have just tried these classes and I think there are some points to fix if you confirm them:
- Qg...
2014-07-01
-
- You can use the option "suppress attribute form..." option in layer properties/fields to get the same behavior.
We di... -
11:25 PM Bug report #10775 (Closed): Empty attribute dialog shown for memory layers
- In the new QGIS 2.4 an empty attribute dialog is shown when adding a feature to a memory layer, which does not contai...
-
- The OL plugin is currently not available for 2.4.
-
- The OL plugin is currently not available for 2.4.
-
- The OL plugin is currently not available for 2.4.
-
- I try to install OL, but i don`t have it in the selection process.
How can i reset or something the list, or instal... -
- If you're working from a print composer you can set the DPI, and export in high resolution. This request is for a way...
-
- I would have to agree with Aren on this, I had a client complain how the image resolution was just sub optimal. I spe...
-
- I have a model which uses the Fixed Distance Buffer, I have tried to edit the value to another one after saved and it...
-
- Can we have a more user friendly error message for many of the processing stuff? e.g. I get the following
Error exec... -
- I opened a project that had a missing PostGIS layer. The dialog to fix the broken layer came up and immediately, QGIS...
-
- The QgsLayerTree* classes are exactly what you are looking for. Please see the doxygen documentation of the classes (...
-
- The QgsLayerTree* classes are exactly what you are looking for. Please see the doxygen documentation of the classes (...
-
- My intent is to automate production of raster files to use QgisMapServer as a WMS Server.
In order to manage it, I us... -
- i don`t know how i can copy the rest of the message, because the log dissapear after i hit ok on the other error
-
- i don`t know how to save the log, i just have the printscreen
-
- tried again and now it worked
-
- this time i installed Qgis 2.4 in c:\\ especially for not having the know-ed problems.
"C:\\Program Files\\QGIS Chug... -
- baditaflorin - wrote:
> tested with other save location
>
> Oooops! The following output layers could not be open
> ... -
- tested with other save location
Oooops! The following output layers could not be open
Output raster layer: F:/OpenSt... -
- is this another case of QGIS installed in f:?
the module (as the others you reported) works fine if qgis is installe... -
- Oooops! The following output layers could not be open
Output raster layer: C:\\Users\\florin\\AppData\\Local\\Temp\\p... -
- Now I get it. Paths are independent.
Thanks for the explanation -
- confirmed also here on Linux with the lowest value for simplification.
-
- confirmed also here on Linux with the lowest value for simplification.
-
- confirmed also here on Linux with the lowest value for simplification.
-
- confirmed also here on Linux with the lowest value for simplification.
-
- confirmed also here on Linux with the lowest value for simplification.
-
06:23 AM Bug report #10767 (Closed): Simplified rendering causing boxes to appear instead
- When using simplified rendering on a layer, I frequently get what seems like a bounding box instead of the correct un...
-
-
- I suggest the same approach as Alvaro OTF simplification, which is actually quite fast.
The default could be crafted ... -
- The simplify approach is could be affordable for a print goal .
But could be too slowly for a web browsing map.
Almo... -
- As discussed on the mailing list long ago, probably the best approach would be to simplify (generalize) complex (mult...
-
- Jerome Alary wrote:
> Since I'm not the only one now, let's reopen it.
QGIS doesn't do any sound output - even the G... -
- Since I'm not the only one now, let's reopen it.
-
02:35 AM Bug report #10746: Buzzer sound when the map is refreshing
- Forgot : local files, with dropbox sync.
-
- Joern Caro wrote:
> Jerome Alary wrote:
> > Find out that the sound is only present when using layers from my Dropbox... - 04:38 AM Bug report #10589 (Closed): QgsMapToolTouch
- Fixed in changeset commit:"978eb2e3b8af57e44c621635c427270a725b2412".
-
04:08 AM Bug report #10765 (Closed): Actions on layer don't use field values
- if you call the action on the edit form
ping -c 5 [% "ip" %]
action is taken - the variable "ip" is not sent
Start... -
- >> - iface can't be used in a stand-alone python Script (see attached python script)
Of course that is why I said yo... -
- >> - iface can't be used in a stand-alone python Script (see attached python script)
Of course that is why I said yo... -
- Hello Nathan,
I think there are some points to deal with before closing:
- iface can't be used in a stand-alone pyth... -
- You have saved the project with relative paths.
If you want to open a project using Python inside QGIS you can use... -
- You have saved the project with relative paths.
If you want to open a project using Python inside QGIS you can use... -
- You have saved the project with relative paths.
If you want to open a project using Python inside QGIS you can use... -
- Steps to reproduce:
Create a new project with QGis Desktop 2.4
Save it into home directory as "myproject.qgs"
Add a ...
2014-06-30
-
- As reported in http://osgeo-org.1560.x6.nabble.com/Compiling-QGIS-2-4-with-GCC-4-4-debian-squeeze-td5146777.html, and...
-
01:16 AM Bug report #5602: Identify disabled in WMS for grouped layers
here an example of mapserver (6.4.1) mapfile not working for me:...-
12:40 AM Bug report #10758: drag and drop of layers or layers group between projects produces inconsistent...
- No, it wasn't. But I noticed that now is possibile to drag a layer or a group of layers from one project to another. ...
-
- was this working on a previous qgis release?
-
- was this working on a previous qgis release?
-
- With two qgis project opened, if I move a layer or a layer group from one project to another, picking it with the mou...
-
- As a temporary workaround, can you try to reproduce #10746 and try the two in combination?
If you can recreate "somet... -
- another "f:" installation issue? it works fine here with qgis installed in a "normal" drive.
-
- another "f:" installation issue? it works fine here with qgis installed in a "normal" drive.
-
- Oooops! The following output layers could not be open
Output vector map where points will be written: C:\\Users\\flor... -
- Matthias Kuhn wrote:
> Cannot reproduce here (CSV provider, first two columns as X/Y)
after adding the files you mus... -
- Cannot reproduce here (CSV provider, first two columns as X/Y)
-
- baditaflorin - wrote:
> The problems seems to be because i have it installed in F:
are non standard installation pat... -
- baditaflorin - wrote:
> The problems seems to be because i have it installed in F:
are non standard installation pat... -
- baditaflorin - wrote:
> The problems seems to be because i have it installed in F:
are non standard installation pat... -
- The problems seems to be because i have it installed in F:
-
> Let me know if that's not sufficient.
yes I can replicate the "red rectangle" with your data, but not with other ...-
01:45 PM Feature request #10743: wavelength support for hyperspectral images
- Off the top of my head, I can't think of any data source which has a geotiff with wavelength information embedded in ...
-
- Bryan - is this only for ENVI datasets? DO you have an exmaple of e.g. GTiff datasets that have wavelength informatio...
-
- Keeping the information about the wavelength in the band metadata would also be useful for other things like spectral...
-
- Hi,
in #10740.
I give a potential solution.
My solution is to enhance the code to support an optionally second change... -
- Partly duplicated in #10740
-
- Still far from optimal
-
10:46 AM Bug report #10761 (Closed): Preview modes not working
- The new colour preview modes (daltonism simulation) do not work under MacOSX - QGIS 2.4 and Night Build.
-
- I can confirm I am using the BBOX parameter in the uri:...
-
07:48 AM Bug report #10413: non-cached WFS won't load
- can you please add the python code you are using?
Because I think this is/should contain exact the same logic
- if ... -
- Although the original issue is resolved I am now experiencing the same problem when adding a WFS layer using the Pyth...
-
- Although the original issue is resolved I am now experiencing the same problem when adding a WFS layer using the Pyth...
-
08:18 AM Feature request #10759 (Open): Give warning when trying to save wrong type in attribute table
- QGIS should raise a warning when a wrong type is being saved into an attribute tables column.
When a string ('foo') ... -
07:01 AM Bug report #10757 (Closed): PostGIS table view loads but won't display
- PostGIS (v. 2.0.4 on Windows, under PostgreSQL v. 9.2.8-4) table Views with 4d geometry are loaded in QGIS 2.4 but ar...
-
- That was neither supposed to propose to change the filter on the user nor not to introduce the "Update Selected" butt...
-
- I'm not sure about that. I don't like the idea of changing the filter on the user, they may have it set the way they...
-
- I'm not sure about that. I don't like the idea of changing the filter on the user, they may have it set the way they...
-
- I'm not sure about that. I don't like the idea of changing the filter on the user, they may have it set the way they...
-
- I'm not sure about that. I don't like the idea of changing the filter on the user, they may have it set the way they...
-
- We should probably set the default attribute table filter to "selection (if present)" that will show selection or - i...
-
- This was already implemented in QGIS server a while ago.
-
- This was already implemented in QGIS server a while ago.
-
- Using Win7 64bit, and the OSGeo4W64 installer, at every shutdown of QGIS a minidump file is written. This happens reg...
-
- already done yesterday in commit:9f777177. You can also specify SRID -1 to work around this.
-
- already done yesterday in commit:9f777177. You can also specify SRID -1 to work around this.
-
02:12 AM Bug report #10754 (Closed): Oracle Provider: cannot open a layer without an SRID definition (NULL...
- Hello,
on QGis 2.4, I am not able to open a layer without an SRID definition in the Oracle metadata table (SRID is d... -
- Crashes here only in the following order:...
-
02:17 AM Bug report #10755: Python Console crashes when removing non-existent vector layer
- Added minidump
-
- When I try to run the following code (included in attachment crash.py) from Python Console, the QGis crashes by sayin...
-
- See also #2113 (probably a duplicate)
2014-06-29
-
- Does the following workaround to update the qml work for you?
* Open layer/qml in 2.2
* Save project
* Open project ... -
- I'm trying to load a style saved as a .qml but when I load it, the value map defined in the .qml is not loaded. I hav...
-
12:19 AM Feature request #9810 (Closed): [GDAL][NetCDF] Generate band name with NetCDF EXTRA_DIM
- Implemented and merged with the pull request https://github.com/qgis/QGIS/pull/1269
This feature is in Version 2.4 -
- Implemented and merged with the pull request https://github.com/qgis/QGIS/pull/1269
This feature is in Version 2.4 -
11:45 PM Bug report #10746: Buzzer sound when the map is refreshing
- Jerome Alary wrote:
> Find out that the sound is only present when using layers from my Dropbox.
> I was not able to ... -
- *Steps to reproduce:*
# Create a new project
# Open the attached provinces.shp dataset
# Open the topology checker pa... -
- I cannot replicate.
What rule/s dod you used? can you attach sample data? thanks! -
- I cannot replicate.
What rule/s dod you used? can you attach sample data? thanks! -
- Fixed in changeset commit:"0a2948af30d4004d8dd732b405da1cfcdaa160b6".
-
- The layer tree now implements this.
-
- The layer tree now implements this.
-
12:12 PM Bug report #9863: sometimes data in 900913 crs is not shown
- Nevermind if it was a PostGIS bug, its fixed. I did a vacuum analyze on the table and now it displays fine. Sorry f...
-
- Keep this closed for now. Might be a PostGIS issue (testing with PostGIS 2.1.2 on windows with QGIS 2.4 OSGEO4W)
I ... -
- Regina Obe wrote:
> Haven't had a chance to test this again. I have to refind the data I was working with. It didn't... -
- Regina Obe wrote:
> Haven't had a chance to test this again. I have to refind the data I was working with. It didn't... -
- for live tracking on Windows use GPSGATE as a way to put in communication QGIS and the GPS, is very simple and easy t...
-
- for live tracking on Windows use GPSGATE as a way to put in communication QGIS and the GPS, is very simple and easy t...
-
10:42 AM Feature request #10751 (Closed): GPS unit communication with QGIS and live tracking
- The reasoning given for the closure of issue "#10749" is that "...much less necessity of a tool to download waypoints...
-
-
- Barend Kobben wrote:
> Jürgen,
> Thanks for that clarification. Nice to hear there is progress. If I can help in any ... -
- duplicate of #7182
As there is no one maintaining this tool I guess that this is a candidate of removal from QGIS (a... -
- duplicate of #7182
As there is no one maintaining this tool I guess that this is a candidate of removal from QGIS (a... -
- The GPS tools option in vector crashes QGIS2.4 when trying to import waypoints from GPS unit (Garmin60sx). This is th...
-
- oops.
you has right.
I don't see the border width it was uder the line of sight in the standard windows.
Sorry for... -
- oops.
you has right.
I don't see the border width it was uder the line of sight in the standard windows.
Sorry for... -
- not confirmed here, the border width is by default 0.
-
- The
label -> draw background -> border color
is not rendering.
The fill work correctly .
Instead the border color ...
2014-06-28
-
01:05 AM Bug report #3975: PDF exports on OSX always convert text to outlines
- Jürgen,
Thanks for that clarification. Nice to hear there is progress. If I can help in any way (other then actual C ...
Also available in: Atom