Activity
From 2013-09-21 to 2013-10-20
2013-10-20
-
11:44 PM Bug report #6430 (Feedback): QGIS doesn't conform to WMS 1.3.0 resolution spec
-
10:12 PM Feature request #8725: Speed improvement in the render of geometries for qgis
- I have implemented the simplification of geometries in the vector-providers. The general behavior simplifies the geom...
-
- I have implemented the simplification of geometries in the vector-providers. The general behavior simplifies the geom...
-
06:38 PM Bug report #8920 (Closed): DB Manager Fails to Load Raster | QGIS 2.0.1
- Hello, I'm receiving the following error below when trying to load a raster stored in PostGIS, via the QGIS db manage...
-
02:43 PM Bug report #8919 (Closed): R scripts: not possible to export .csv
- I created this script that should export a .csv table. However I get the general error "Oooops! The following output ...
-
01:48 PM Bug report #8908: spatialite database updated only from opening qgis project
- I guess to better understand the question and why it do this is preferrable to link the discussion on spatialite ML a...
-
09:03 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
- Hello Cédric,
sorry to report that your solution does not work for me...
In a standalone install (not OSgeo4W), th... -
04:06 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
- I was hesitating to backport this to the 2.0 fixes but if there is demand, I can do so. The task itself is easy.
-
- Fixed the spatialite problems in commit:249526b
No other value than 0 is allowed for integer and real columns.
I'm p...
2013-10-19
-
11:25 AM Feature request #8912: Better support for georeferenced pdf
- Yannick Portier wrote:
> Thanks for the info.
> It seems I'm out of luck though, because I use QGIS (the latest updat... -
10:26 AM Feature request #8912: Better support for georeferenced pdf
- Thanks for the info.
It seems I'm out of luck though, because I use QGIS (the latest update from OSGeo4W) on Win32 an... -
- If you have a copy of QGIS compiled against GDAL 1.10 (and you should, if you use Linux, OsX or QGIS 64bit for Win) t...
-
- If you have a copy of QGIS compiled against GDAL 1.10 (and you should, if you use Linux, OsX or QGIS 64bit for Win) t...
-
11:24 AM Bug report #8710: cmake mises missing Qsci
- Hello, I had the same problem by opening the console from qgis 2.x under OpenSuSE 12.1
The error message was:
K... -
- aperi2007 - wrote:
> We usually put as url on an "add wms new lyaer" an url where there is hardcoded a parameter
>
>... -
We usually put as url on an "add wms new lyaer" an url where there is hardcoded a parameter
..&map_resolution=91
W...-
- Laurent SAEZ wrote:
> Hi,
> I'm a little disappointed that this bug is not taken into account in the new version 2 of... -
04:07 AM Bug report #6430: QGIS doesn't conform to WMS 1.3.0 resolution spec
- I'll talk to my department.
Regards -
- Laurent SAEZ wrote:
> Hi,
> I'm a little disappointed that this bug is not taken into account in the new version 2 of... -
- Hi,
I'm a little disappointed that this bug is not taken into account in the new version 2 of QGIS. The severity of t... -
05:50 AM Feature request #8733: Better formatting for scales
- Now localized representation for scales used. Reopen if necessary.
-
- Fixed in changeset commit:"82e645167116c29489cd72ee53cfebc54949ee5a".
-
- Fixed in changeset commit:"bdc02a2369c807d8b79c6c7afb0f0210011528a0".
-
- I cannot confirm it here. Can you post sample data (sql dump) and exact steps on how replicate?
-
- I cannot confirm it here. Can you post sample data (sql dump) and exact steps on how replicate?
2013-10-18
-
11:51 PM Bug report #8916 (Closed): GDAL Tools: no feedback on extract projection
- No feedback is given upon completion ("World file written")
-
10:23 PM Bug report #8915 (Rejected): Newline character of Python output is forced to LF only
- Execution of following Python code:
@
f = open(filename, "w")
f.write("FOOBAR\
")
f.close()
@
is expected to output t... -
07:42 PM Bug report #8914 (Closed): Merge features does not work
- Hello everyone,
Environment:
* Qgis 2.0
* Postgis 2.0
* PostgreSQL 9.1
* Ubuntu 13.04
Scenario:
I have a LineStri... -
- ability to view the algorithm (source code) that tools are running in the same way that Whitebox is implementing
refe... -
- ability to import / load maps in pdf format such as USGS maps
-
- Environment:
* ubuntu 13.01;
* qgis 2.0;
* installed from ppa;
* PostGIS 2.0;
* PostgreSQL 9.1;
Scenario:
I added ... -
- Hello guys and gals.
First of all, here's my setup:
* Ubuntu 13.01
* QGis installed from ubuntugis-unstable ppa;
* ... -
04:08 PM Feature request #8909: Add "R dependencies" to R scripts Help files
- This is a good idea. This help section is needed not only for R, but for Python scripts too.
-
- Many R scripts call external R packages that users need to pre-install to run the scripts. I would like to suggest th...
-
01:54 PM Bug report #8908: spatialite database updated only from opening qgis project
- Attached sample database. The database will be updated as soon as the view4 is added as a layer to a qgis project.
I ... -
- If I load a spatialite spatial view into QGIS (2.x) with no data in it, then the spatialite database gets updated onl...
-
01:20 PM Bug report #8907 (Closed): unicode not preserved when saving layer attributes as CSV
- I'm sorry for this. It turns out that this is a problem with Excel. Excel doesn't properly handle UTF-8-encoded CSV f...
-
- I'm using the Natural Earth 1:10m admin 1 states, provinces data (http://www.naturalearthdata.com/http//www.naturalea...
-
09:28 AM Feature request #8898: "Save vector layer as" - limit export
- > Thoughts?
Nice idea. But do you you mean clip clip, or do you mean intersects? I think altering the data (clip) is... -
- I have no idea what Qt Designer is or how to use it, or having just searched, even where to get it from. I'm happy to...
-
- Is this still happening? Were you able to determine the cause?
-
- Fixed in changeset commit:"344a5b6e55b363f4f4ee7d4978c7cf44b6f9c8be".
-
- Right, sorry for the noise.
-
- Right, sorry for the noise.
-
- In fact on master does not seems to happen anymore. See attached image.
-
- Do you have an example? The password should not appear in the tooltip.
-
- implemented in commit:03a60d3
-
- implemented in commit:03a60d3
-
02:07 AM Feature request #8791: Support PostgreSQL materialized views
- ++ :
It is a *very* important feature for qgis for all computation heavy queries.
Cheers,
Rémi-C -
02:39 AM Bug report #8886: allow paletted rasters to have class labels
- QGIS 1.8: raster with color table is rendered as QgsRasterLayer::PalettedColor by QgsColorRampShader which keeps colo...
-
02:32 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
- Hi,
I have the same problem, which only happens with 64bit version.
I could solve it doing this :
# edit C:\\OSGeo4W...
2013-10-17
-
> Thoughts?
that would be a very nice improvement indeed.-
04:24 PM Feature request #8898: "Save vector layer as" - limit export
- Having it in one dialog would be nice. Something that I tend to do a lot is also clip all the layers in the map to a...
-
- Hmmm, didn't see that (thanks!). Odd that it's a different dialog. Once it's open you have no way of knowing which di...
-
- the second one is available since... long ao.
-
- the second one is available since... long ao.
-
- For the "Save vector layer as" function two extra options:
1) Export only what is on the screen.
2) Export only wha... -
- as before, please provide sample data and specific steps on how replicate.
-
01:21 AM Bug report #8904 (Closed): clipping not working
- I'm trying to clip various layers with a polygon, all in 4326 and none of the available clipping tools are working - ...
-
- can you share a sample project (and data)?
-
- For the past week or so Master (ubuntugis-nightly), when opening an existing v2.0 project that worked perfectly befor...
-
- Showing DB credentials on the tooltip on mouse over the legend seems an useless
security flaw (e.g. these can acciden... -
09:47 PM Feature request #8901 (Open): Improvement on Composer Legend Behavior
- Hi all,
I might be missing something, but wouldn’t it be great if legends in QGIS’s composer can be resized freely (... -
05:15 PM Bug report #8863: Blank 'input' pulldowns in GRASS v.clean layers in OSX
- Loaded yes; visible no.
-
- Andrew Lover wrote:
> That's in the GRASS plugin.
do you have grass layers loaded and visible in your project? -
- That's in the GRASS plugin.
-
01:19 PM Feature request #8845: PDF output types & placement.
- I know that there is a printer output that can be used for a PDF printer instead of using the PDF save, but on mine I...
-
- The problem is, that a timeout simply calls @QNetworkReply::abort()@. There is no possibility to set the reason for t...
-
11:43 AM Bug report #8847 (Closed): Some Settings -> Customisation entries blank
- Should be fixed with commit commit:ddd4dae
Please reopen issue if needed -
- Should be fixed with commit commit:ddd4dae
Please reopen issue if needed -
11:36 AM Feature request #6894: GRASS r.mapcalc cumbersome to use, issues on Windows
- Hi Giovanni,
I hope someone can find a solution, because this module is important and the limitation of r.mapcalculat... -
11:06 AM Bug report #8899: Help text for "Save vector layer as"
- I am going to test the functionality on the weekend and add reasonable default values ..
Regarding the GUI .. well t... -
- And I'm not in the position to create windows builds in a suitable time.
On the other hand, having a look at qgsvecto... -
- Hi Mattias, sorry but I'm not in a position to install branches. I need compiled stand alone installs (win x64). I'll...
-
- I added a lot of new options to this dialog at the HF in Brighton. Hopefully this can be included for the next releas...
-
- I'm not complaining, I'm reporting a bug.
And given I have no clue what "Symbology Export" does (which is why I was ... -
- Don't complain, just write nice text and submit it.
-
- The help text for "Save vector layer as" doesn't include anything for the "Symbology export" aspect. It does include ...
-
- The "Skip attribute creation" and "Add saved file to map" checkboxes are both in the same "panel" as the "OGR Creatio...
-
08:50 AM Bug report #8880: Mysql Query builder
- Hi,
I am sorry but I do not know MySQL nor QGIS well and I want to ask why "there must be a column names not in quot... -
- Sorry Alexander, I disagree strongly.
Yes, mathematically the result (3.33333.) is obviously correct. However, becaus... -
- This is obviously correct. You divide integer to real and result surprisingly will be... real. Use toint() function i...
-
- This is more of a issue with the attribute table and attribute dialog itself. The expression engine is just doing wh...
-
- - Open field calculator
- Expression 10/ toreal( 3)
- Set to create a new field type (integer), width 10.
Result... -
- Jonathan Moules wrote:
> Giovanni Manghi wrote:
> > standolone installer 32bit: both grass and saga are not found by
... -
- Jonathan Moules wrote:
> Giovanni Manghi wrote:
> > standolone installer 32bit: both grass and saga are not found by
... -
- Giovanni Manghi wrote:
> standolone installer 32bit: both grass and saga are not found by
> processing
I can confir... -
07:34 AM Bug report #8896 (Closed): xlsx drag and drop fails to open datasource
- Hi, here on windows 7, using qgis 2.0.1-2 64 bits - gdal 1.10, drap and drop a xlsx file can't open datasource.
Open... -
07:30 AM Bug report #8891 (Closed): Crashing with WFS new in QGIS 2.0
- Thanks Giovanni,
I tried it on Master and got the same issue, but then tried it on another Win7 PC running 2.0.1 and... -
- does not happen on qgis master on Linux. Would you my test qgis master with the osgeo4w installer? thanks.
-
- QGIS crashed when identifying or selecting certain features through a WFS connection. This was not an issue in 1.8.
... -
- this issue was already fixed in master. It does happen when you have OTFR enabled, regardless if you are really repro...
-
- this issue was already fixed in master. It does happen when you have OTFR enabled, regardless if you are really repro...
-
- I have a shapefile with two polygons - EPSG:27700 (British national grid).
- Enable editing
- Open field calculator
... -
- Hi,
I have been testing widely xls reading with gdal 1.9 in QGIS.
Where ogrinfo reads data correctly, QGIS can't lo... -
- Hi,
when opening an existing project using expressions or sql queries in Rule based classes or labels or feature sub... -
07:03 AM Bug report #8892 (Closed): Please register QgsProject.createEmbeddedLayer() into SIP for python
- As requested. Useful for python plugins with dedicated projects.
-
- I have two layers in my project:
1) An oracle layer with 32 features.
2) A shapefile with 53345 features.
If I have... -
- Confirmed on windows 7.
I also think this should be a blocker since it is a regression from QGIS 2.0. -
- Labelling fails for spatialite spatial views in QGIS-Master 2.1.
Steps to reproduce (also see attached screendump):
... -
- I made a pull request that fixes it, the module changed almost completely since SAGA 2.0.8 (or at least have changed ...
-
- Fixed also the problem with invalid GML in commit:d5f167f. The error is shown in results dialog and user can switch f...
-
04:24 AM Bug report #8878: OSM plugin fails to download all data within given extent
- Martin, there are ways that are confined within the bounding box (see the yellow tertiary highway, some small stair w...
-
- I don't think that users should be forced to download always full features and relations because they can be quite bi...
-
03:03 AM Bug report #8878: OSM plugin fails to download all data within given extent
- QGIS currently uses this kind of query for download:...
-
- I don't think this is possible at the moment. These buttons are deactivated, because all changes on these forms are a...
-
03:28 AM Bug report #8885 (Closed): Buttons (Ok, Cancel) disappear in "Apri Modulo" from Attribute Table
- In QGIS 2 it is changed the visualisation of form opened from Attribute Table: instead of open the form in a separate...
-
03:37 AM Bug report #8866 (Closed): qgis composer elements' frame thickness reverts to 0.00 when (re)loadi...
- Fixed in changeset commit:"491231e600915110d12216781d2f38018c82847d".
-
- when use a SVG symbol, and choose a data-definition field for the dimension.
QGIS sclae the symbol, ma don't follow ... -
03:30 AM Bug report #8886 (Closed): allow paletted rasters to have class labels
- Since version 2 qgis does not seem to support paletted rasters (e.g. tiff's with colortable) with a label for each ra...
-
03:28 AM Feature request #8884 (Closed): Symbol too small in legend when map units are used
- When a symbol is defined with map units, it is sometimes shown in the legend at a very small scale, preventing to see...
-
- Hi,
Using the qgis 2.1 dev (32bit).
And try-ing to use the
data defined properties 32bit to choose the SVG file.
See... -
03:02 AM Bug report #8881 (Closed): QGIS server fails to display capabilities when there are 2 layers of t...
- When the project contains several layers based on the same postgis table (possibly with different sql filters), the G...
-
02:57 AM Bug report #8876 (Closed): Error disinstalling VTerrain lugin
- Fixed in changeset commit:"b114dceb1aea15f51b7526d2d1ebfca0f3073c36".
-
- Fixed in changeset commit:"aeef5a809499e2a564be401b50f1a5a640c2a30e".
-
- Im going to change the priority of this bug because in complex models it is sometimes necessary to disable parts of t...
-
- It should be fixed, there was really one byte more in memcpy.
Please test. -
- Fixed in changeset commit:"2b8197f19ae12a9779b27436ae250ba09447b62c".
2013-10-16
-
01:56 AM Bug report #8880 (Closed): Mysql Query builder
- On clicking on fields in Query builder in where clause a column name appears included in double quotes,
but values -... -
- I will have a look at it.
-
06:56 PM Bug report #8877 (Closed): Kriging from SAGA (Processing) fails to run
- Hi,
I am unable to run Kringing functions from SAGA (Processing toolbox) apparently due to wrong/old options being u... -
- I will reopen this feature request because r.mapcalculator is limited to 6 inputs maps, to it would be anyway better ...
-
- Hi,
#6372 is now fixed and support r.mapcalc functions.
Thanks! -
- I have no better ideas. Larry, please push your patch directly to master.
-
- The empty entries you are referring to are menu separator actions, which are generally added with QMenu::addSeparator...
-
- The empty entries you are referring to are menu separator actions, which are generally added with QMenu::addSeparator...
-
- See attached screenshot, selection handles visible on the legend element.
-
- This should be fixed with commit commit:753977d
Please verify. -
- This should be fixed with commit commit:753977d
Please verify. -
- This should be fixed with commit commit:753977d
Please verify. -
- If I right click on an error message, you'll see as attached a little black box appears.
If I mouse around the box t... -
- Forgot to expand on the qgis-import_vs_actual-osm.png; the imported lines are displayed using red squares along path,...
-
- Steps to reproduce:
1. Load the shapefile attached to this issue (ICJ-DMZ.zip)
2. Download OSM data for the map ext... -
- That was fast Martin, thanks.
-
- Fixed in commit:7dc20ef50719c94ccd24d4b862dd278931acb19d (master) and commit:c8c802fba6ec3e903285ae6c8fd5af4e02415f0f...
-
- Fixed in commit:7dc20ef50719c94ccd24d4b862dd278931acb19d (master) and commit:c8c802fba6ec3e903285ae6c8fd5af4e02415f0f...
-
- The drop-down menu has one action, 'Close all,' which closes all message bar notification in the message bar 'stack.'...
-
- Giovanni Manghi wrote:
> yes, this must be done then, because at this moment if the server does not support feature/g... -
- It should be fixed in commit:de8a5d6.
When WMS is reprojected, the identify tool does not know context (extent,size)... -
- When try to disinstall the plugin VTerrain.
I have a python error:
Si è verificato un errore durante l'esecuzione d... -
- The problem is that sometimes it may make sense to put MaxFeature count to some relatively high value on the server s...
-
- Hi
jratike80 - wrote:
> The MaxFeatures=1 request is perhaps fired for reading a sample of data for verifying the sch... -
- Hi,
The MaxFeatures=1 request is perhaps fired for reading a sample of data for verifying the schema but I do not kn... -
- Looking through them using the search ("WFS bounding" and "wfs box"), the closest I can find is #8656
But that is ab... -
- there is already a ticket about this issue, please check and eventually close this as duplicate.
-
- I am using QGIS to connect via WFS to a table with about 7million features. The maxFeatures the server allows to be r...
-
- Joel Copeland wrote:
> I'm using Windows7. I discovered this same issue using Lisboa, so I just upgraded to Dufour. ... -
08:06 AM Bug report #8785: Style file not saved in Win 8
- I'm using Windows7. I discovered this same issue using Lisboa, so I just upgraded to Dufour. Still can't seem to sav...
-
- You're actually right, it does not work in 1.8 either. I had in mind an old map of me, I must have been using the sam...
-
- This is an old issue, but I don't think it was working in qgis 1.8. If I'm not wrong I think that it is not even a qg...
-
- This is an old issue, but I don't think it was working in qgis 1.8. If I'm not wrong I think that it is not even a qg...
-
- Now it is working properly Giovanni, both in modeler and outside modeler.
Thank you very much!
Let's see if Victor c... -
- Pedro Venâncio wrote:
> > SAGA 2.0.8 qgis master with my patch
> > clip with polygons does not works -> I know where ... -
- > SAGA 2.0.8 qgis master with my patch
> clip with polygons does not works -> I know where I made a mistake, working ... -
- Pedro Venâncio wrote:
> > this option is mandatory in saga 2.10 and is not available in saga 2.0.8
> >
> > what vers... -
- Pedro Venâncio wrote:
> > this option is mandatory in saga 2.10 and is not available in saga 2.0.8
> >
> > what vers... -
- > this option is mandatory in saga 2.10 and is not available in saga 2.0.8
>
> what versoin of SAGA are you using? t... -
- Pedro Venâncio wrote:
> > weird, it works fine here with both saga 2.0.8 and 2.10
> >
> > can you attach here sample... -
- > weird, it works fine here with both saga 2.0.8 and 2.10
>
> can you attach here sample data?
Yes Giovanni,
Try t... -
- Pedro Venâncio wrote:
> >
> > this error is different and will be fixed by
> >
> > https://github.com/qgis/QGIS/pull... -
02:57 AM Bug report #8853: Parameter "-GRIDS" is not passed in SAGA "Grid Calculator", but just in the mod...
- hey guys
before you get crazy with this, I suspect this has to do with parameters that are multiple inputs in the mo... -
- >
> this error is different and will be fixed by
>
> https://github.com/qgis/QGIS/pull/949
Hi Giovanni,
I've been ... -
- It's also wrong for WCS.
But seems to be right for WFS. -
- The "layer source" for a WMS layer when you go to layer properties says something like:
crs=EPSG:27700&featureCount=... -
- Similar issue for WCS it seems too.
-
- Few issues with the "metadata" tab on layer properties for a WMS and WFS.
For WMS I have a large GetCapabilities fil... -
- Minor thing:
"No feature split done: If there are selected features, the split tool only applies to the selected one... -
- You are right that the tool works when there is a ring (or part).
However this bug report is dealing with the fail c... -
- the tool works when clicking on a node of a ring (or a part, in case of the delete part tool).
Why is not possible t... -
- If I try and delete a ring (advanced digitising), but there is no ring where I click, I get a warning pop up:
"Snap t... -
- If I try and create a ring in a multipart polygon (advanced digitising), it fails with the error "The inserted Ring i...
-
- duplicate of #7361
-
- duplicate of #7361
-
- duplicate of #7361
-
- The User Agent that QGIS sends with requests seems to be "Mozilla/5.0"
Could something specific to QGIS be added to i... -
- Giovanni Manghi wrote:
> Jonathan Moules wrote:
> > The server is a GeoServer 2.3.5 install
> > This happens with QGI... -
- Jonathan Moules wrote:
> The server is a GeoServer 2.3.5 install
> This happens with QGIS 2.0
can't you really provi... -
- The server is a GeoServer 2.3.5 install
This happens with QGIS 2.0 -
- Confirmed on master, and is a regression.
-
- Confirmed on master, and is a regression.
-
- Confirmed on master, and is a regression.
-
- I'm not sure if this is a feature request or bugfix.
I have a raster layer loaded. I then disable "render". The pr... -
- Steps to reproduce:
1. Create a new project
2. Create a new composer sheet
3. Add a legend item
4. Activate the [x] F...
2013-10-15
-
- Steps to reproduce:
1. Import topology from test_points.osm into QGIS (via Vector -> OpenStreetMap -> Import Toplogy ... -
- It selects only from the first item of the subselection.
-
- GRASS plugin or processing/sextante?
-
- Hello,
It's possible this has already been logged, but the topic is too general to find.
In the GRASS tools there ... -
- Sorry I forgot to attache the other file, my aplogies...
-
- Good morning,
(win 7 / QGIS 2.0.1 64b)
The attached image shows a raster (coloured using a spectral colmap, ver... -
- Per screenshot, the Close" and drop-down menu overlap on the "invalid data source" error. Thus whenever I click the d...
-
- Hi there,
it's back I'm afraid...
1. Install QGIS 2.0.1 / 64b (win 7)
2. load a WGS84 layer (in my case, a postGIS ... -
- Pedro Venâncio wrote:
> But it seems that affects other modules. Try, for instance, the Clip grid with polygon.
this... -
- Pedro Venâncio wrote:
> But it seems that affects other modules. Try, for instance, the Clip grid with polygon.
in t... -
- But it seems that affects other modules. Try, for instance, the Clip grid with polygon.
-
- the issue is that just in the modeler, the
_libgrid_calculus "Grid Calculator"_
module is not given the
_-GRIDS... -
- ok on master it doesn't work, I will try have a look at it.
-
- Hi Giovanni,
Yes, saga 2.0.8 compatibility is active.
Now I've tested on Linux and gives the same error:... -
- it works fine here under Linux.
Are you sure that the "saga 2.0.8 compatibility" checkbox is active? -
- I'm with some errors using SAGA (2.0.8) modules in Modeler. I attached a sample model and a test raster.
If I run th... -
- duplicate of #8767
-
- duplicate of #8767
-
03:28 PM Bug report #8858 (Closed): Zebra frame is not printed correctly
- Hi,
I tried zebra frame in the composer today and it looks fine on the screen
but when I import into PDF or print I... -
11:29 AM Bug report #8857: sip: Unable to find file "QtCore/QtCoremod.sip"
- wiping out build dir and re-running cmake doesn't help either. Fails at 50% of build this time.
SIP version is 4.14.5... -
- Wiping out CMakeCache.txt and re-running cmake doesn't help. It still failes at 98% of the build :(
-
- I got the error in the Subject while building the 2.0 branch.
NOTE: sip wasn't installed at the time of the first cma... -
- cmake didn't complain about me NOT having sip, but I got a failure at "make" time.
I had to wait up to 50% of build ... -
- Yes Filipe.
-
- Filipe Dias wrote:
> Still true?
yes -
- Still true?
-
- It would be good to be able to group symbols in a legend; e.g., for OSM points, putting all the amenities in one grou...
-
- The Add vector menu correctly navigates the local network (Windows), whereas the Browser cannot explore inside the co...
-
- Remi Cura wrote:
> hey I think you are mistaken :
I just asked -
- hey I think you are mistaking :
The other issue is another one, very limitating, that is that DB manager locks (post... -
- similar/duplicate of #8150 ?
-
- When using QGIS 2.0 with a postgres 9.3 server :
adding some layer with the DB Manager via the sql windows (the qgis ... -
- The title of this ticket should be changed.
-
- leave this open, I plan to add the missing tools, if possible.
In general I'm not in favor of having just the option... -
- Perhaps it would be better to open individual tickets, stating which (if any) changes should be made to each individu...
-
- Is this still valid?
-
- Has this been changed?
-
- I'm checking, I may have discovered the issue in the processing code.
-
- Is this still true?
-
- This would very handy, especially when there many boxes to move around.
-
- Sorry, I misread the text.
-
- I do not see tags available.
-
-
- This is would be very useful I think.
-
- Or maybe provide link to the online documentation on the GDAL website?
-
- Is this still happening?
-
- It is lightning fast in QGIS 2.0.1.
I noticed it when opening a 20k attributes table. -
- The OSGeo4W installer has this as an option too under "Use IE5 Settings".
-
- somehow seems fixed, at least on master.
-
- somehow seems fixed, at least on master.
-
- Good point on "ALL_SDO_GEOM_METADATA".
-
- Sounds good, knowing the exact extents of the layer is not really often so important. Actually the extents which are ...
-
- I have an Oracle table with 7.3million features in it that is spatially indexed. When I add the layer to QGIS, even t...
-
- I can't see this anymore, at least on master, so probably some commit has fixed it.
-
- I can't see this anymore, at least on master, so probably some commit has fixed it.
-
- The text for "n%" complete when scanning Oracle database tables is behind the progress bar. So when the bar is > 50% ...
-
- Per attached, some of the things in the Settings -> Customisation menu items have no text entries saying what they ar...
-
- Yes, back then it had a lot of bugs. But now it's working ok.
-
02:50 AM Bug report #8846: Running a R Script through Sextante not working
- Thanks. This is what I suspected but I wonder if anyone had the same problem when version 1.8 was still the latest ve...
-
- I forgot to say that R Packages are currently installed in the folder specified in the "lib" variable. I am wondering...
-
- You need to upgrade to QGIS 2.0 to be able to use R/Processing. The version you are using is outdated.
-
- I am trying to run one of the example R scripts that comes with the default installation of QGIS 1.8. I have set-up t...
-
- seems fixed by
#e04b426f00f86a154ff74ed6bda5727086596b0f -
- seems fixed by
#e04b426f00f86a154ff74ed6bda5727086596b0f -
- it is working fine, at least here on qgis master and Linux.
2013-10-14
-
- I just tried with the latest code and I still get this error. The only difference is that it QGIS freezes instead of ...
-
- I just tried with the latest code and I still get this error. The only difference is that it QGIS freezes instead of ...
-
- PDF output compatibility might include a dropdown for EG. Acrobat 4 (PDF 1.3) - Acrobat 8/9 (PDF 1.7)and have PDF/X o...
-
- Would be nice to retain text as text rather than converting to paths and embedding the fonts if possible within PDF's...
-
- I am having difficulty with placing PDF files out of QGIS into Adobe InDesign. There could be an issue also with the ...
-
- Update: Should be set to the QGIS application for the category type rather than the browser.
-
03:06 PM Bug report #8826: Cannot build python_module_qgis_gui (2.0.1) with SIP 4.15.2
- Fwiw, I can replicate this error while trying to build this package for Chakra, using the same package versions as Di...
-
11:20 AM Feature request #8842 (Closed): Pull request submitted to add GEOS single sided buffer operation ...
- https://github.com/qgis/QGIS/pull/935
-
10:55 AM Bug report #8836 (Closed): Default styles from postgis layers not loading
- In trunk builds, postgis layers are not loading default styles stored in the "Datasource database". I can manually lo...
-
10:13 AM Bug report #8834 (Closed): Style for layer spatialite
- When I try to modify the style for a spatialite layer of polygons the map is not correctly shown if I choose Categori...
-
- If you want to use a different python/sip/pyqt4 than what is in your ubuntu by default, you need to build QGIS yourse...
-
- If you want to use a different python/sip/pyqt4 than what is in your ubuntu by default, you need to build QGIS yourse...
-
03:34 AM Bug report #8832 (Closed): ERROR: Couldn't load SIP module. Python support will be disabled. (re...
- Hi there, this might be related to ticket #8826, as it looks similar.
QGIS has updated to QGIS version 2.0.1 on my U...
2013-10-13
-
11:53 PM Feature request #8830 (Open): Ability to resize regular polygons
- Yes I know there are nice plugins out there that can draw circles and polygons, what I need is to be able to enlarge ...
-
- Fixed in changeset commit:"e04b426f00f86a154ff74ed6bda5727086596b0f".
-
12:41 PM Bug report #8340: Very slow Spatialite DB creation on qgis 2.0/master
- For reference, this is also confirmed in OGR. See http://trac.osgeo.org/gdal/ticket/5270 for the fix that has been ap...
-
- I don't know the code,
but as reported from the last documentation from spatialite 4.1.1:
http://www.gaia-gis.it/gai... -
- I guess the problem is due to a commit/transactional problem.
Infact I guess the actual code is simply call many ins... -
- I think I found it. I could repeat the slow "InitSpatialMetadata" with Spatialite-gui and learned that the right way ...
-
- Hi,
Metadata table "spatialite_history" gathers log data from all statements. For me with Windows Vista 32-bit and ... -
- This seems fixed at least on qgis master, please reopen if nececssary.
-
- This is a complex but important issue that should be addressed in the next version. Returning a "could not load layer...
2013-10-12
-
01:50 AM Bug report #8775 (Reopened): PyQGIS QgsPoint has a __hash__ function, even though it is mutable
-
- Thanks for the quick reaction!
I think the changeset doesn't actually fix the issue though: QgsPoint is a mutable ty... -
- Fixed in changeset commit:"44b7767134e442b95b6d99a1cbe612d2aeb856c7".
-
- Hi Raymond and jratike80,
thanks for you comments.
For me in good whatever direction we think is more appropriate.... -
- Hi,
What is "union" for rest of the world is "dissolve" for ESRI. This speed comparison deals loosely with that
http... -
- I would disagree that this is plugin problem. The issue is wider -
essentially, it states that Map Composer fails to... -
- The OpenLayers plugin does not support printing in the map composer. Saving the canvas with "save as image" and addin...
-
- The OpenLayers plugin does not support printing in the map composer. Saving the canvas with "save as image" and addin...
-
11:04 AM Bug report #8828 (Closed): Composer Grid Intervals
- I create a lot of maps in lat/lon and display the lat/lon tics and annotations on my maps. Using QGS v2.0.1 I like t...
-
- I have seen it in a training course but I'm not able to replicate it anymore.
-
- I have seen it in a training course but I'm not able to replicate it anymore.
-
- Jürgen Fischer wrote:
> Hm, we should decide what to file here. For me it's out of scope as it's not a QGIS problem,... -
- Hm, we should decide what to file here. For me it's out of scope as it's not a QGIS problem, but a GDAL packaging pr...
-
- Hm, we should decide what to file here. For me it's out of scope as it's not a QGIS problem, but a GDAL packaging pr...
-
- Hm, we should decide what to file here. For me it's out of scope as it's not a QGIS problem, but a GDAL packaging pr...
-
07:24 AM Bug report #8773: Adding WMS layer crashes QGIS
- Hi!
I'm not sure if this is related, but I have problems with WMS layers on 2.0.1 (34139bc) and 2.1 Master (f4e0c83)... -
- Hi!
I'm not sure if this is related, but I have problems with WMS layers on 2.0.1 (34139bc) and 2.1 Master (f4e0c83)... -
- Hi!
I'm not sure if this is related, but I have problems with WMS layers on 2.0.1 (34139bc) and 2.1 Master (f4e0c83)... -
- Hi!
I'm not sure if this is related, but I have problems with WMS layers on 2.0.1 (34139bc) and 2.1 Master (f4e0c83)... -
- Fixed in changeset commit:"adc850ee6fac7c6d966548313737355831f2a581".
-
- The term geometry does not refer to a QGIS geometry, but to a widget property geometry. Open your .ui file in a text ...
-
04:00 AM Bug report #8760: Custom Form from .ui File crashes QGIS on Ubuntu
- Same problem.
Very simple shape files and a very simple ui-file created in Qt4 Designer crashes QGIS without any war...
2013-10-11
-
- Duplicate #8824
-
- Duplicate #8824
-
- Yes it is duplicate. We were writing it at the same time..
I updated my example file because it turns out I did not ... -
12:49 PM Bug report #8825: OpenLayers plugin print bug
- I think it is a duplicate of #8824 that I filed just before.
-
- While using OpenStreet layers with print composer and projection different from
Pseudo Merkator (EPSG 3857 ) layers a... -
- I would prefer to have a NULL checkbox next to the field instead of having the NULL text.
-
- I switched the project to a different projection(4326) than the diagram layer(21781) but diagrams still show without ...
-
01:33 AM Bug report #8827 (Closed): Corner coordinates in map composer drawn in wrong place
- When drawing a world map (extent: -180,-90,180,90) in the composer with coordinates drawn along the borders every 10 ...
-
- Hi Daniel and Giovanni,
Good to see you are working on this and taking the analyses results so seriously!
As you r... -
05:59 PM Bug report #8826: Cannot build python_module_qgis_gui (2.0.1) with SIP 4.15.2
- While this issue remains open, can I temporarily disable PyQGIS completely, so my RPM build succeeds? Thanks!
-
- I'm trying to build QGIS 2.0.1 for Mageia Linux (Cauldron). The build breaks with the following output:...
-
- Patrick Dunford wrote:
> At what point will the current master build incorporate this fix.
> Thankyou.
The patch was... -
- At what point will the current master build incorporate this fix.
Thankyou. -
- Fixed in changeset commit:"1690fc4beb0c89059f94ee15de616e8b6f835684".
-
- Just added the same issue at the same time..
It used to be only possible to use OpenLayers with Pseudo Mercator proje... -
- Most notably Save As from the main menu of the main window works just fine!
-
- I don't know if that matters but all polygons use NAD83 UTM 15N (ESPG:26915) and so was the project document. The set...
-
- I use Bing map as a background. Everything looks right while in application and in Map Composer. However saving it re...
-
- I confirm this behavior with 2.1.0-23 on Windows XP 32bit SP3. I had to roll back to 2.1.0-21 . It does start ok.
-
- Hi,
Just yesterday downloaded overnight qgis-dev build via os4geo installer.
qgis-dev can't start. I got the messag... -
- Fixed in changeset commit:"f4e0c83c6e3f839e368d3bf2a0fdf3ac546134f7".
-
- Fernando Carboni wrote:
> segue a configuração do sistema
what the steps to replicate the issue?
quais são as opera... -
07:39 AM Bug report #8821: bug print, create pdf and pictures
- segue a configuração do sistema
-
- segue a configuração do sistema
-
- Olá,
you must be a little more detailed when reporting bugs.
What platform do you use? what qgis version (release, ... -
- Olá,
you must be a little more detailed when reporting bugs.
What platform do you use? what qgis version (release, ... -
- Olá,
you must be a little more detailed when reporting bugs.
What platform do you use? what qgis version (release, ... -
-
- OGR does not delete features in shapefiles immediately. Instead, it marks and skips features when they are being dele...
-
06:40 AM Bug report #8656: WMS GetFeatureInfo Filter: No results
- +*WMS GetFeatureInfo, using Identify-tool*+
*Request URL*: ... -
- You are right Giovanni.
Maybe in my previous tests it didn't appear, because I was using an integer as value and a st...
2013-10-10
-
- probably the issue has the same origin as #8818
-
- probably the issue has the same origin as #8818
-
05:06 PM Bug report #8820 (Closed): "Value map" edit widget appears to have the value of the first value i...
- When I view the attributes of a feature that has a field with a "Value map" edit widget and that field is NULL, the f...
-
- duplicate of #8764
-
- When I select the "File name" edit widget, the initial directory goes to the osgeo4w\\bin directory.
It would be n... -
- Giovanni Manghi wrote:
> seems then an issue in the osgeo4w 64 bit packages. Please file your notes here:
See also "... -
- Giovanni Manghi wrote:
> seems then an issue in the osgeo4w 64 bit packages. Please file your notes here:
>
> http:/... -
08:47 PM Bug report #8629 (Closed): QGIS Dufour 2.0.1 32 or 64 crash at startup on Windows 7 64
- After updating the msvcrt package to 1.0.1-3, I don't get the error message anymore. Thanks!
-
01:38 PM Bug report #8811: gdal_array python modules are missing from the Win64 QGIS 2.0.1-2 standalone in...
- Hi
Yeah thanks we got it working with the OSGEO4W installer. It will be great to have those libs shipped with the st... -
- Already fixed in QGIS-OSGeo4W-2.0.1-2-Setup-x86.exe
-
- Already fixed in QGIS-OSGeo4W-2.0.1-2-Setup-x86.exe
-
02:59 AM Bug report #8816 (Closed): Windows standalone installer contains references to Quantum GIS
- The Windows standalone installer (QGIS-OSGeo4W-2.0.1-Setup-x86.exe) still contains references to Quantum GIS. There a...
-
09:19 AM Bug report #8584: WFS 1.0.0 Client requests with FILTER fails against Geoserver
- A QGIS 2.0 WFS 1.0.0 request also fails against other WFS-Server like deegree 3.
(because of the missing ogc namespac... -
- More reading here:
http://msdn.microsoft.com/en-us/library/ms235460%28v=VS.100%29.aspx -
- Libraries in OSGeo4W are built with VS 2008, so if you compile QGIS with a different compiler (with different C/C++ r...
-
- Libraries in OSGeo4W are built with VS 2008, so if you compile QGIS with a different compiler (with different C/C++ r...
-
- Matthias Kuhn wrote:
> Works here.
> As soon as I switch back to LineEdit, the value gets shown again, wherever the d... -
- Works here.
As soon as I switch back to LineEdit, the value gets shown again, wherever the description has been shown... -
- The widget should allow the user to choose by what is defined in the "description" column, but then write what is def...
-
- I don't know of any fix. I was just surprised because it seemed to work for me today. Or maybe I'm doing it wrong?
-
- on 2.1.0+git20131010+f49ea36~precise-ubuntugis1 does not work, is the fix newer than this revision?
-
- Does this also happen in master? I just tested it there and this does not happen for me.
-
- The "value map" widget always write the "description" field instead of the "value" one as expected.
Is a regression... -
- This feature is now available in qgis master.
-
- This feature is now available in qgis master.
-
> We have to show the error and give chance to switch format.
agree-
>Are you sure that the server including data was not touched?
100% sure
> Other polygons, like those red and g...-
- Fixed in changeset commit:"5e14fea1b856e4178f545c9a81ce7090240bc06c".
-
- yeah I confirm it, I don't what I have done wrong the first time i tested. Isn't this a regression?
-
- yeah I confirm it, I don't what I have done wrong the first time i tested. Isn't this a regression?
-
- yeah I confirm it, I don't what I have done wrong the first time i tested. Isn't this a regression?
-
- Fixed in changeset commit:"b2ad0a9bb914c67309b0e4c486b3493086b04a73".
2013-10-09
-
01:56 AM Bug report #8815 (Rejected): QGIS Visual Studio 2012 build - runtime fail
- I have followed the Windows "installation instructions":http://www.qgis.org/api/INSTALL.html on a _clean machine_. Th...
-
11:31 PM Bug report #8757: Vector cannot be styled by joined attributes
- I confirm it does not work, also for rule-based symbologoy.
features not drawn but can be identified! -
- I followed the steps and everything worked as expected for me. OS X 10.8.5, current trunk build, qt 4.8.5, gdal 1.10....
-
- confirmed on Linux on qgis master
giovanni@sibirica ~ $ qgis
Warning: loading of qt translation failed [/usr/share/q... -
- confirmed on Linux on qgis master
giovanni@sibirica ~ $ qgis
Warning: loading of qt translation failed [/usr/share/q... -
- confirmed on Linux on qgis master
giovanni@sibirica ~ $ qgis
Warning: loading of qt translation failed [/usr/share/q... -
- confirmed on Linux on qgis master
giovanni@sibirica ~ $ qgis
Warning: loading of qt translation failed [/usr/share/q... -
- confirmed on Linux on qgis master
giovanni@sibirica ~ $ qgis
Warning: loading of qt translation failed [/usr/share/q... -
- Version data
QGIS version 2.1.0-Master QGIS code revision 773e0d4
Compiled against Qt 4.8.5 Running against Qt 4.8.5
... -
- I have observed a history of these crashes since 1.8 and they persist in spite of the development process since this ...
-
- This issues have been fixed in the osgeo4w installers, Now is needed to wait that new standalone installers to be cre...
-
- This issues have been fixed in the osgeo4w installers, Now is needed to wait that new standalone installers to be cre...
-
06:29 AM Bug report #8717: GRASS launch error (qgis 32bit standalone installer)
- I have the same problem on Windows 7 32-bit Czech with today downloaded QGIS-OSGeo4W-2.0.1-2-Setup-x86.exe installer....
-
- Nicolas Boisteault wrote:
> Any reasons why WMTS is supported and not WMS? Thx
Just because I implemented WMTS and w... -
08:37 AM Feature request #8809: WMS/WMTS with dimension parameters should be handled
- Any reasons why WMTS is supported and not WMS? Thx
-
- WMTS dimensions are already supported.
-
- WMS/WMTS with 'dimension' parameters as described here in Annex C : http://portal.opengeospatial.org/files/?artifact_...
-
- Giovanni Manghi wrote:
> Of the CRSs that the server make available this happens just with EPSG 3763, maybe is a proj... -
- Giovanni Manghi wrote:
> > it is using "Pontos de Agua_layer" as XML tag which is not valid. So if you want to suppor... -
- Giovanni Manghi wrote:
> no, it does not. See attached images. The images refer to a identify click in that green fe... -
- Tim Sutton wrote:
> For more information, see also the downstream ticket from InaSAFE: https://github.com/AIFDR/inasa... -
- For more information, see also the downstream ticket from InaSAFE: https://github.com/AIFDR/inasafe/issues/674
-
- We are having problems running some python code that worked well in previous binary versions of QGIS. Example code be...
-
- It should be possible to add 'dimension' metadata in QGIS.
Dimension is defined here in Annex C : http://portal.open... -
- Sorry, I should have checked the screen capture images.
I think that you are right and that should not happen. Perha... -
04:42 AM Bug report #8796: Cannot use forward slash in WMS name - deletes further info in field/form
- I hear what you're saying with regards to the layer name published by the WMS service itself, but surely a descriptiv...
-
- I hear what you're saying with regards to the layer name published by the WMS service itself, but surely a descriptiv...
-
- Fixed in master
-
- Fixed in master
-
- A data-defined size of '200' and a property (i.e. via dialogue) size '200' in a polygon centroid fill results in two ...
-
- Subject says it all.
2013-10-08
-
12:37 AM Bug report #8801 (Closed): QGIS fails to start when not in domain
- When not in home network domain - qgis fails to to start with 0xc00000be error ("Kan de toepassing niet correct start...
-
- seems then an issue in the osgeo4w 64 bit packages. Please file your notes here:
http://trac.osgeo.org/osgeo4w/repor... -
- seems then an issue in the osgeo4w 64 bit packages. Please file your notes here:
http://trac.osgeo.org/osgeo4w/repor... -
07:27 AM Bug report #8782: can't open compressed geotiff - missing codec
- I just downloaded the latest release build of gdal from gisinternals.com (labeled release-1600-x64-gdal-1-10-1-mapser...
-
- deflate works on 32 bit GDAL, but apparently not on 64 bit. I tested a deflate file against the 64bit gdal packaged w...
-
11:27 PM Bug report #8800 (Closed): mssql default attribute values not supported by attribute table
- It seems that default attribute values (SQL Server table default values) are missing in the QGIS 2.0 attribute table?...
-
- I started QGIS 2.0 64bit with the above fix, and then still the error message (R6034) was displayed.
-
- I have a project that I move between Mac and PC, but I have two different drive names. Sometimes when I move the proj...
-
- When I order rows using the column filter in the attribute table on a list to make it alphabetical, and then do a sel...
-
- after all this seems a OTB issue
http://webcache.googleusercontent.com/search?q=cache:CzsQntsm9kUJ:bugs.orfeo-toolbo... -
08:19 AM Bug report #8797 (Closed): Can not build qgis-2.0.1 without full spatialite support
- I cant build QGIS:...
-
- Don't try to use forward slash in WMS layer name because it is not allowed there. That's because layer name is of XML...
-
- If you use a forward slash in the name when adding a WMS or WFS service, the forward slash and everything after it in...
-
- Carlos Eduardo Hernandez wrote:
> Yes. Results are the same when trying to save to the desktop. Results are the same ... -
03:14 AM Bug report #8795 (Closed): Potential WFS filtering issue
- I've taken this as an example: http://demo.3liz.com/wfst/wfs-filter.html
I'm using QGis Server 2, also tried upgradi...
2013-10-07
-
12:48 AM Bug report #8785: Style file not saved in Win 8
- Yes. Results are the same when trying to save to the desktop. Results are the same when running QGIS in administrator...
-
- do you have write permissions in the output folder?
-
11:52 PM Feature request #8794 (Open): Automatically clean NULL text from attribute edit form line edit
- Currently when using identify tool to open vector object attribute editing dialog, all empty text fields are shown as...
-
- Hi,
Paletted and deflate compressed files works for me with QGIS 2.0.1 which comes with GDAL 1.9.2 on 32-bit Windows... -
- I have now tested LZW and PACKBITS. Both are successfully opened by qgis 2.0.1
The file I have been testing against i... -
- Could you please provide the input .osm file in order to reproduce the crash?
-
08:54 AM Bug report #8793 (Closed): Crash while Exporting OpenStreetMap Topology to SpatiaLite
- Downloaded osm.pbf file, converted to osm, extracted a region with osmosis and wanted to open the layers.
Successfull... -
- Hi,
I actually just got MDB access working today for "homebrew's GDAL":https://github.com/mxcl/homebrew/blob/master/... -
- Hi,
I actually just got MDB access working today for "homebrew's GDAL":https://github.com/mxcl/homebrew/blob/master/... -
- What was the reason that nothing can be done? Seems strange that we could with the old version but not the new one.
-
- I'm sorry... proprietary formats are always a pain in the aRs.
-
- I'm sorry... proprietary formats are always a pain in the aRs.
-
03:46 PM Bug report #8752: Unable to open ESRI personal geodatabase in 2.0
- Okay, I chatted for a bit with William at KyngChaos, and confirmed the Mac OSX version will not open ESRI Personal Ge...
-
- Changes goto branch:
https://github.com/ahuarte47/QGIS/tree/Issue_8725 -
- done.
branch:
https://github.com/ahuarte47/QGIS/tree/Issue_8769 -
- done.
branch:
https://github.com/ahuarte47/QGIS/tree/Issue_8769 -
- Changes go to branch:
https://github.com/ahuarte47/QGIS/tree/Issue_8776 -
- Changes goto branch:
https://github.com/ahuarte47/QGIS/tree/Issue_8733 -
- see also #8724-17
(identify of reprojected wms layer is wrong). -
> it is using "Pontos de Agua_layer" as XML tag which is not valid. So if you want to support non valid XML (do you?...-
- Radim Blazek wrote:
> Giovanni Manghi wrote:
> > I have just tested master (commit 4072e39227da578f6bd8f359a5197e6e... -
- Radim Blazek wrote:
> Giovanni Manghi wrote:
> > I have just tested master (commit 4072e39227da578f6bd8f359a5197e6e... -
- I have seen this too today in the pc of a trainee. Others didn't had this issue.
-
03:42 AM Bug report #8788 (Closed): Absence of color ramp and other symbologies - windows 7 and 8
- It seems that the symbologies (color, color ramp, line...) does not install correctly with the standalone installer o...
-
- Hi Alexander,
this issue happens on master (not 2.0.1) also for other plugins that do install as processing add-ons ... -
- This is not an QGIS issue (at least in part related to Semi-Automatic plugin), please post it in plugin bugtracker ht...
-
- This is not an QGIS issue (at least in part related to Semi-Automatic plugin), please post it in plugin bugtracker ht...
-
04:06 AM Bug report #8789 (Rejected): QGIS failing to load semi automatic classification plugin and otb an...
- I have just changed my reposotiries to ubuntu-gis and also compliled the latest gdal from source but when I open QGIS...
-
- PostgreSQL now supports materialized views since version 9.3: (http://www.postgresql.org/docs/9.3/static/sql-createma...
-
03:45 AM Bug report #8636: spatialite provider error when primary key is made from multiple integer columns
- I have the same issue but on all integer fields.
I create a simple table with an integer autoincremented field as pr... -
- Plugin manager didn't remember last visited tab. It always switched to "All" tab, even if last active tab was differe...
2013-10-06
-
- Giovanni Manghi wrote:
> I have just tested master (commit 4072e39227da578f6bd8f359a5197e6ea70ef874) and does not se... -
> Fixed in master, not in 1.8. The bug is reported for both 2.x and 1.8.
I have just tested master (commit 4072e...-
> Fixed in master, not in 1.8. The bug is reported for both 2.x and 1.8.
maybe the wrong identify when reprojecting...-
- Giovanni Manghi wrote:
> so for you doesn't work with the data I have attached here?
No.
-
- Radim Blazek wrote:
> Thanks for testing.
>
> For me it does not work. Table is OK, identify OK, feature counts for... -
- When I try to save a layer style into a .qml file, no file is created.
I follow these steps:
1. Right click on the ... -
- Hi, I can resolve this feature, can you assign this task to me?
thanks -
- Done
gitub:
https://github.com/ahuarte47/QGIS/commit/ac32672515a5ffb84630aaa0b000d68d098754a9 -
- Done
gitub:
https://github.com/ahuarte47/QGIS/commit/ac32672515a5ffb84630aaa0b000d68d098754a9 -
- Hi, I can resolve this feature, can you assign this task to me?
thanks -
- In QGIS 2.0 it is possible to define the window size of custom forms in the designer, and QGIS will respect that.
Bu... -
- Done.
I'm new using gitub and I'm learning this tool, Sorry!
Thanks! -
- Alvaro Huarte wrote:
> done for test.
>
> github:
> https://github.com/ahuarte47/QGIS/commit/28691ff96e0ef2a97a8f1d0... -
- Done.
I'm new using gitub and I'm learning this tool, Sorry!
Thanks! -
- Hi Alvaro, can you please make a Pull Request in the qgis repo? This way other will be able to see it and review and ...
-
- This would be an interesting improvement.
In my opinion, it could be solved by placing a "default layer" option (whe... -
- It would be very interesting to be able to create different paths in Modeler, which would be followed by the decision...
-
- Platform:Win 7 Professional SP1, 64 bit
Version: 2.0.1 64 bit
QGIS version 2.0.1-Dufour QGIS code revision d94c044
Co... -
-
- what version of qgis? what platform?
-
- Adding a compressed geotiff layer produces an error message ...
-
> > Different projection should not make any difference, if not reprojected in QGIS.
>
> it is making in this case....-
- This would be an excellent addition. I've been working with R/Sextante scripts and this would be extremely useful. Th...
-
- Victor Olaya wrote:
> It is not a problem in packaging, but actually a bug introduced in master with one of the lates... -
- It is not a problem in packaging, but actually a bug introduced in master with one of the latest changes I made. I ha...
-
- I'll close this because the issue is not in processing itself but in qgis packaging and it was already reported in an...
-
- I'll close this because the issue is not in processing itself but in qgis packaging and it was already reported in an...
-
- Giovanni Manghi wrote:
> I confirm that identify WMS layer seems broken in 2.0.1/master
>
> Add this layer (postos ... -
- I confirm that identify WMS layer seems broken in 2.0.1/master
Add this layer (postos de vigia)
crs=EPSG:3763&featu... -
- I confirm that identify WMS layer seems broken in 2.0.1/master
Add this layer (postos de vigia)
crs=EPSG:3763&featu... -
- For reference:
http://www.mail-archive.com/[email protected]/msg15114.html -
- Not sure if this was the actual fix, but...
When trying to add the QGIS-grass-plugin I ran into problems. Removing a... -
- When opening shapefiles, information in cpg-file is ignored.
QGIS defaults to the last used encoding selection from ...
2013-10-05
-
- Hi,
I think it would be interesting to have a drop-down list as one of the input parameters in Modeler. Right now we... -
- I think it is important to indicate in the "output" description field that the user must provide the path to the fold...
-
- still true on qgis 2.0.1
-
- still true on qgis 2.0.1
-
11:12 AM Bug report #8776 (Closed): project background color does not take effect until you pan
- project background color change (set in project properties) does not take effect until you pan
seems to be the same ... -
09:18 AM Bug report #8770: BatchProcessingDialog object has no attribute
- I tested using the osgeow 64 bit installer and installing 2.0.1 and I can confirm it does indeed work. A problem must...
-
- Found a pattern!
Data is cut at whole degree intervals...
Only data that are less than the degree part of the coord... -
- The @QgsPoint@ class in PyQGIS has a (automatically generated?) @__hash__@ function, which returns a hash value that ...
-
- Alvaro Huarte wrote:
> I'm making progress, I think I get promising results. Attach a table of results for three test... -
- I'm making progress, I think I get promising results. Attach a table of results for three tested layers.
-
- I'm making progress, I think I get promising results. Attach a table of results for three tested layers.
-
- Radim Blazek wrote:
> Giovanni Manghi wrote:
> > Of the CRSs that the server make available this happens just with EP... -
- Giovanni Manghi wrote:
> Of the CRSs that the server make available this happens just with EPSG 3763, maybe is a proj... -
- Of the CRSs that the server make available this happens just with EPSG 3763, maybe is a projection support issue?
I ... -
- I cannot reproduce (master/Debian 7) but I have suspicion where it could come from:...
-
- Giovanni Manghi wrote:
> so this #5896 is fixed?
Fixed in master, not in 1.8. The bug is reported for both 2.x and 1... -
- Radim Blazek wrote:
> Giovanni Manghi wrote:
> > the correct BB is the one in the attached image, if in the reproject... -
- I know there are other problems with labels (#8068) and labels background (#8413) but I don't know if it's related.
...
2013-10-04
-
- We have had the same problem. This only appeared on Ubuntu 12.04 so far.
Here it was related to having "geometry" an... -
- We have had the same problem. This only appeared on Ubuntu 12.04 so far.
Here it was related to having "geometry" an... -
- Thanks for testing.
For me it does not work. Table is OK, identify OK, feature counts for classes in legend are OK ... -
- Hi, I cannot confirm here, try the attached shapefiles: join "join2" to "join1" and use the "code06" column to do the...
-
- Giovanni Manghi wrote:
> the correct BB is the one in the attached image, if in the reprojected layer you are seeing ... -
-
- done
gitub:
https://github.com/ahuarte47/QGIS/commit/194f9beabef5b0b23d3bd2365deab1fa5c399571
-
- done
gitub:
https://github.com/ahuarte47/QGIS/commit/194f9beabef5b0b23d3bd2365deab1fa5c399571
-
- done
gitub:
https://github.com/ahuarte47/QGIS/commit/194f9beabef5b0b23d3bd2365deab1fa5c399571
-
- Hi Paolo, I can resolve this feature, can you assign this task to me?
thanks -
- ps
no crash on 1.8 -
- A few days ago it was pointed that adding WMS layers to QGIS was crashing it and I wasn't able to confirm it at that ...
-
- > the tools that changed in saga 2.10 need to be "splitted" in processing. Have a look in the tools descriptions file...
-
- Pedro Venâncio wrote:
> Hi,
>
> After applying this patch for SAGA 2.1 mode, at this time there is no tool that allo... -
- Hi,
After applying this patch for SAGA 2.1 mode, at this time there is no tool that allows to do these operations on... -
- Deactivating a module in Modeler only takes effect while the Modeler is open. From the moment you close Modeler, desa...
-
- There are still issues with the standalone installers and the processing framework, but seems ok on the osgeo4w insta...
-
- Just installed and tested the latest Windows 64bit dev release installed with osgeo4w-setup-x86_64.
For the first ti... -
- The geospatial pdf format in gdal allows dynamic pdf's to be generated that allow layers to be turned on or off in th...
-
- Hi Giovanni, I am testing my changes, if it successly in some days I will try a pull request.
Thank you very much!
-
- Hi Alvaro, do you have a branch that can be tested? Cheers!
-
- I just made a complete uninstall, tried to removed all qgis related files and folders, re-booted and tried a fresh QG...
-
- If I try to use graduated classes for styling, selecting the standard deviation option in the drop-down selector caus...
-
- Works well in trunk now, thanks!
Marco Hugentobler wrote:
> Fixed in c71d87769e0a1a5f7d66c830b62931edff6a1c70
-
- I've filed an upstream bug as the workaround suggested by the error message (adding in-between point) doesn't help:
h... -
- Casting the geography to a geometry would fix this:
WHERE "location"::geometry && ...
Jef: was this that you had in ... -
- In Settings -> Options -> Locale, on the drop-down for "override system locale", three languages don't have little fl...
-
- In Settings -> Options -> Locale, on the drop-down for "override system locale" US English is listed twice. Once with...
-
- Andre Pacheco wrote:
> Thanks for the feedback, but the problem isn't the fact of small values, it's the fact of show... -
-
-
- This is a general issue and not only one about the composer. There are still many places in QGIS where the browsing s...
-
- This is a general issue and not only one about the composer. There are still many places in QGIS where the browsing s...
-
- This is a general issue and not only one about the composer. There are still many places in QGIS where the browsing s...
-
- confirmed also on Linux.
-
- confirmed also on Linux.
-
- confirmed also on Linux.
-
- Still an issue so is reopened for now.
-
02:41 AM Bug report #8759 (Closed): ECW support missing in 32bit QGIS on Windows
- see http://www.faunalia.it/node/438
2013-10-03
-
01:52 AM Bug report #8767 (Closed): Zebra grid outer line missing
- Good Morning QGIS Community,
The print composer in QGIS 2.0.1 has added a lot of new feature which I think are great... -
01:44 AM Bug report #7547 (Closed): CRS settings ignored for new shape file
- Fixed in 2.0
-
- Fixed in 2.0
-
- Good morning to the QGIS community,
First off, thank you for QGIS 2.0.1, its a great piece of software and the GUI i... -
11:42 PM Bug report #8765: Postgis raster shows random data with out-db image data
- Forgot to add details of the used version.
QGIS version 2.0.1-Dufour
QGIS code revision d94c044
Compiled against Qt... -
- Out-db rasters from postgis database are shown as random data and sometimes crashes QGIS.
The problem might come fro... -
11:15 PM Bug report #8651 (Closed): legends are broken in qgis master, print layouts
- Fixed in c71d87769e0a1a5f7d66c830b62931edff6a1c70
-
- I ran 'git bisect' and tracked it down to:
commit:0edf0d2764f20d2ca6ab4f6ee86d82e63a7259fc is the first bad commit
... -
04:59 AM Bug report #8651: legends are broken in qgis master, print layouts
- This issue raised with pictures "here":http://gis.stackexchange.com/questions/73095/qgis-print-composer-layer-symbolo...
-
04:52 PM Bug report #8764 (Closed): Default file path and return to last used directory
- I'd like to be able to set the default file path in Composer AND make it go back to the last known location when sele...
-
04:41 PM Bug report #8754 (Closed): Wrong request URL while adding WMS layer
- Problem was solved by ignoring information returned by GetCapabilities request.
-
- jratike80 - wrote:
> My bet is that your server is advertising that GetMap URL in its GetCapabilities. Check the "Ig... -
- My bet is that your server is advertising that GetMap URL in its GetCapabilities. Check the "Ignore GetMap URI report...
-
- Jurgen committed a fix for the "NOT NULL" condition (thank you!):
#4ea85fe50a0e2390917347b7218de13e6c57ed26
Aren: d... -
- Fixed in changeset commit:"c797895ca7ceb558b7811b88f764c89e6fd278b6".
-
04:23 AM Bug report #8738: Field Calculator with problems
- Thanks for the feedback, but the problem isn't the fact of small values, it's the fact of showing wrong values. In my...
-
- > using your sample data, projections and grids the result in sextante/processing is a vector that has attributes but...
-
03:39 AM Bug report #8760 (Closed): Custom Form from .ui File crashes QGIS on Ubuntu
- After .ui file for a form is load, it crashed when the tools Identify Results is used.
Environment:
OS: Ubuntu 12... -
02:56 AM Bug report #8659: raster image with rotated worldfiles
- hello,
I am very sorry, I have used this vlx under Autocad
http://www.cadstudio.cz/georefimg
to generate worldfiles
... -
- hello,
I am very sorry, I have used this vlx under Autocad
http://www.cadstudio.cz/georefimg
to generate worldfiles
... -
- hello,
I am very sorry, I have used this vlx under Autocad
http://www.cadstudio.cz/georefimg
to generate worldfiles
... -
- OSGeo4W 32bit (and in turn the standalone installer) doesn't support ECW yet.
-
02:25 AM Bug report #8759 (Closed): ECW support missing in 32bit QGIS on Windows
- Hello,
I installed version 2.0 on my pc with windows xp 32 bit. At the opening, no problem but when I try to open a ... -
- Hi Nathan,
Only equal interval classification method is working in revision 968c321,
the other gives empty results....
2013-10-02
-
- Vector layers cannot be styled (categorized, graduated, ...) based on attributes from
joined table. All features are ... -
- The colour expressions documentation indicate that they return a hex e.g. from the ramp_colour help:...
-
- The support for such formats comes within gdal/ogr. Did you check here
http://www.kyngchaos.com/software/frameworks#... -
- The support for such formats comes within gdal/ogr. Did you check here
http://www.kyngchaos.com/software/frameworks#... -
- I upgraded to the new release and found I can longer open ESRI personal (not file) geodatabases when I choose to Add ...
-
- duplicates #8752
-
- duplicates #8752
-
- I upgraded to the new release and found I can longer open ESRI personal (not file) geodatabases when I choose to Add ...
-
- I've added new WMS connection to our WMS server http://wms.map.vl.ru/service.
!screenshot1.png!
After connection we... -
- Andre Pacheco wrote:
> Hey, there goes an .shp archive. Plz check if it's what you asked. There's already a column wi... -
- Andre Pacheco wrote:
> Hey, there goes an .shp archive. Plz check if it's what you asked. There's already a column wi... -
- Hey, there goes an .shp archive. Plz check if it's what you asked. There's already a column with $area and another on...
-
- Nope! Tried deleting the index file and rebuilding it, no luck!
Most files do not have a .gix file anyway but I've tr... -
- For eliminating one possibility I would delete and recreate the .qix index. However, I do not really believe it will ...
-
- When data is missing it is only in the top and/or right part of the map window. Never bottom or left!
-
- Tested with several shapefiles. In small scale it seams to work fine, but as I zoom in the data disappears partially ...
-
- I found that the symbol will also disappear from a legend if you edit the legend item name for an existing project. C...
-
07:01 AM Feature request #8749 (Closed): simple summarized help about how to contribute to the QGIS docume...
- Re : simple summarized help about how to contribute to the QGIS documentation ?
There is no section « About this do... -
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > > I attach a sample shapefile. It's a selection of the portuguese... -
- Giovanni Manghi wrote:
> > I attach a sample shapefile. It's a selection of the portuguese caop, on EPSG:3763.
> >
>... -
> I attach a sample shapefile. It's a selection of the portuguese caop, on EPSG:3763.
>
using your sample data, p...-
- Pedro Venâncio wrote:
> Hi Giovanni,
>
>
> On linux is the same.
>
> I can't check if this is a regression, becaus... -
- Hi Giovanni,
On linux is the same.
I can't check if this is a regression, because on 1.8 I get another error when ... -
- Hi,
I had not realized, but this has nothing to do with modeler. The problem is with Clip and a specific shapefile (... -
- Johannes Kroeger wrote:
> Oh I see, thanks! That is not clear or intuitive at all. Maybe label that panel "Apply to a... -
02:33 AM Bug report #8745: Size always 1.00, Rotation always 0° in Symbol Selector
- Oh I see, thanks! That is not clear or intuitive at all. Maybe label that panel "Apply to affected markers" or someth...
2013-10-01
-
- Hi Pedro,
is this a regression? What about on linux (it may use a different proj version)? Can you send me (if you ca... -
- Hi Pedro,
is this a regression? What about on linux (it may use a different proj version)? Can you send me (if you ca... -
- Hi Pedro,
is this a regression? What about on linux (it may use a different proj version)? Can you send me (if you ca... -
- Hi Pedro,
is this a regression? What about on linux (it may use a different proj version)? Can you send me (if you ca... -
- Reproject layer works ok with QGIS default CRS, but doesn't do any reprojection with custom CRS.
I'm with QGIS 2.0.1... -
- you see the right values if you select "simple marker". The values in marker allows you to resize/rotate/etc a symbol...
-
- you see the right values if you select "simple marker". The values in marker allows you to resize/rotate/etc a symbol...
-
- QGIS version 2.1.0-Master
QGIS code revision 968c321
on Linux
Whenever I change the size of a point feature (have no... -
-
- looks like a duplicate of #8660
-
12:15 AM Bug report #8747 (Closed): jpeg displays corrupted
- My jpeg files which display OK in v1.8.0 (running on Windows XP 32bit) are displayed corrupted on v2.0.1 (running on ...
-
- Fixed in changeset commit:"24d110606c9fa58e57feed337dd2ded0af4eaa8f".
-
- Fixed in changeset commit:"24d110606c9fa58e57feed337dd2ded0af4eaa8f".
-
- Johannes Kroeger wrote:
> I meant to file the following but this seems to be the same issue (even though it lacks des... -
- I meant to file the following but this seems to be the same issue (even though it lacks description...).
Can you try ... -
-
- Not sure why this auto-closed itself. Can someone with permission reopen this please?
-
- Fixed in changeset commit:"aaa2fcf4724462e45f93eb97f17fbc2cb8664291".
-
- Olá, I speak Portuguese.
What I asked is a sample of your data to allow us make tests, not a screenshot. Cheers! -
01:05 PM Bug report #8738: Field Calculator with problems
- The first mentioned problem sounds like the issue i posted as Bug #8592
-
- Hi, here's the screen. My dufour is in portuguese, but take a look where it's written "previa de saida".
When I click... -
- the second issue (R6034) have been already reported in another ticket.
About the fist one please post a sample vector. -
- the second issue (R6034) have been already reported in another ticket.
About the fist one please post a sample vector. -
- the second issue (R6034) have been already reported in another ticket.
About the fist one please post a sample vector. -
- I have a PC with Windows 8 installed and there's a problem with Qgis Dufour. When I ask it to calculate the area or p...
-
- Where did you get that rotated world file? For me it looks bad.
I tried to understand how rotated world files are cre... -
- This is the original ArcInfo way and taking the 1st and 3rd letter from the short DOS 8.3 style filename came later w...
-
09:23 AM Feature request #8739 (Open): World file created from Project->Save as image has wrong extension ...
- It looks like when you "save as image", the extension for the world file that gets created is just the extension of t...
-
- If there's an alternative way of doing this, it could help answer this question:
http://gis.stackexchange.com/questi... -
- It would be useful to be able to insert a "Number" type parameter in "Formula" of Field Calculator. E.g:
I want to... -
- *New Description:*
The problem is with Clip and a specific shapefile (http://goo.gl/pdlURR). It gives this error wh... -
-
- Fixed in changeset commit:"fd85aeea954642b1a13acab1d5e624008875ef4a".
-
- QgsRasterTerrainAnalysisPlugin gives to QgsRelief layer URI as inputFile, QgsRelief simply opens it as GDAL file and ...
-
07:19 AM Bug report #4211 (Closed): Enhancement: make "actions" tab more consistent and less confusing
- Fixed in changeset commit:"35f5da70cdb7c26ec1e082fb8a6fbb5b6a44c45d".
-
- Fixed in changeset commit:"fdd98947d763af5023cbd70fb43750f7611ba8f0".
-
- Fixed in changeset commit:"262392093356f7600089bf44d19984b56ec85bab".
-
- Fixed in changeset commit:"d7811a1120e8893ec795b80ac4bd19208f0c4066".
-
- This affects various modules, e.g. Terrain analyses. This is bad also because they cannot deal with WCS layers, and u...
-
07:18 AM Feature request #4355 (Closed): Performing deletion on layer with feature counts turned on should...
- Fixed in changeset commit:"157541ed2b025760e489dd47f7f8212fc60e3a8a".
-
07:18 AM Bug report #5252 (Closed): MSSQL Estimated table parameter is not used
- Fixed in changeset commit:"51011559c4d7cdb5a11e50cae23a20b688df2b77".
-
- Fixed in changeset commit:"051749a495b4ea00bab378d88e0ce049f30d4abc".
-
- Fixed in changeset commit:"c56491b11124f9ceefa9b6b3d501374755aac84c".
-
- I also get the same error with the 64-bit build. Strangely, I can see "msvcr90.dll" twice in the mini-dump from the P...
-
03:08 AM Bug report #8629: QGIS Dufour 2.0.1 32 or 64 crash at startup on Windows 7 64
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > I spent the day testing any available qgis 2.0/master installer fo... -
- Fixed in changeset commit:"86a20e9a68fb61a13cdb439b9e4c10e9167eea50".
-
- Fixed in changeset commit:"c53c85813f4723b75d4e9326d2565fb51eaa8355".
-
- Fixed in changeset commit:"f01206565847655d1caee64d342d999988c66491".
-
- Fixed in changeset commit:"ef838c799f2a7e01b2057adc04c29d4bb484c2b7".
-
- Fixed in changeset commit:"54140310b4878c69395895ada0b70636123b47e3".
- 07:12 AM Feature request #7012 (Closed): Editable unique value should use QCombobox with completer
- Fixed in changeset commit:"df0d690cd08e835cd49e7c6e9ef168cc157e38b8".
-
- Fixed in changeset commit:"fa4819a3536a1f338754fcce1c8ccbb5c90f4970".
-
- Fixed in changeset commit:"96bd7e7f2e1b70e2515e628d3c5583d7d73eeb50".
-
- Radim Blazek wrote:
> BTW, if I select the green area (see wms-identify-clc06-pt.png, project wms_identify_201_reproj... -
- BTW, if I select the green area (see wms-identify-clc06-pt.png, project wms_identify_201_reprojected.qgs) the feature...
-
- It should be fixed in commit:96bd7e7 in master.
-
06:50 AM Bug report #8734: Bug on dfx2shp plugin
- If i just add the dfx file as a layer and then save it as shp it doesn't crash...
-
- what about "save as..."? it works or crashes?
here on Linux qgis does not crash using the dxf2shp plugin. -
- Qgis version: 2.0.1 Dufour
OS: Windows 7 Home, 32bits
-
- what qgis version? what platform? please attach sample data.
-
- what qgis version? what platform? please attach sample data.
-
- what qgis version? what platform? please attach sample data.
-
- When I try to use this plugin qgis crashes
The details (in portuguese) are the following:
Assinatura do problema:
... -
05:48 AM Bug report #8735 (Closed): Automatic red alignment lines stay visible
- When using 'snap to alignment', red alignment lines appear that help to align the objects. Normally they are only vis...
-
04:47 AM Bug report #8635: Activating Plugin "Add Delimited Text" causes QGIS 2.0.1 crash
- Sorry I'm late to the party Jürgen -
QGIS 2.0.1-2 64 bit works fine. I do get an error-dialog which contains a blurb... -
- The list of available scales, at the bottom, is difficult to read: better format numbers as "1'000'000" instead of "1...
-
- Fixed in changeset commit:"569d12dba21e1310816a416ff2112067803d8e27".
-
- Fixed in changeset commit:"cdf7d444690f4fc5dca4ed7959c98f0ac461ee73".
-
- Currently, the text box has several serious limitations:
* the box does not autoresize when changing font size
* lo... -
- Fixed in changeset commit:"6308416ad6a67c948749b0e0cacb3d794e5d82aa".
-
- Fixed in changeset commit:"2712098f56d685c1ba6033802d1314b8e333f6d2".
-
- I have "Only look in the layer registry" option activated, but when rendering the dialog to pick a layer to open I se...
-
- I've a similar case and found out that dropping the "WHERE <geomcol> IS NOT NULL" portion from the query retriving es...
-
- Giovanni Manghi wrote:
> this ticket is really about the wrong identify result issue. At some point I was just saying... -
- Radim Blazek wrote:
> The bug in master (will be 2.1), i.e. crash if format is feature and OTFR is no was fixed by co... -
- The bug in master (will be 2.1), i.e. crash if format is feature and OTFR is no was fixed by commit commit:96bd7e7, s...
-
-
- duplice of #8637
-
02:22 AM Bug report #8729 (Closed): Microsoft visual C++ Runtime Library Error
- this error occurs when launching Qgis 2.0.1 64bit version , you can see the error in the attached picture. but Qgis i...
2013-09-30
-
- I forgot that with the projects attached in #5896-10
is easy to see also that the identify of reprojected wms laye... -
-
11:28 PM Bug report #8659: raster image with rotated worldfiles
- There is something wrong with this raster dataset:
gdalwarp -r cubic -s_srs EPSG:32632 -t_srs EPSG:32632 ped208_cr.... -
-
- QGIS tries by default to only show non-colliding diagrams.
To have all diagrams showing regardless of collisions go t... -
07:48 PM Bug report #7327: dxf export drops elevation data
- I haven't used the feature lately so I can't confirm if it has been fixed, though I suspect it hasn't. Any elevation...
-
05:36 PM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
- The problem is still here with today's update (if anyone's interested):
qgis:
*** 2.1.0+git20130930+52ac084~unstabl... -
-
11:09 AM Bug report #8660: QGIS 2.0 64bit handles JPG rasters incorrectly
- Works now fine in QSGeo4W64 QGIS-dev Codeversion 52ac084.
-
- Default folder for composer templates is in the program folder under apps, composer_templates.
You can`t change this ... -
08:01 AM Bug report #8727 (Closed): GetProjectSettings returns field name instead of alias for display field
- this would not be a problem but GetFeatureInfo returns the display field, thus QWC cannot display any hover informati...
-
- Andreas Pointner wrote:
> Its only at my plugin.
>
> In the plugin i make a new composer and i use the code from the... -
- Andreas Pointner wrote:
> Its only at my plugin.
>
> In the plugin i make a new composer and i use the code from the... -
04:55 AM Bug report #8726: Attribute table in Map Composer has no content
- Its only at my plugin.
In the plugin i make a new composer and i use the code from the cookbook. (http://www.qgis.org)
-
- So this happens just when using your plugin or happens also when you use directly the qgis print composer?
-
- So this happens just when using your plugin or happens also when you use directly the qgis print composer?
-
- I make a QGIS Plugin and I try to use the map composer to print a .pdf Map.
In this Map I like to display the attrib... -
06:20 AM Bug report #8707: Doens't load most of the layers.
- Unfortunately I've a lot of raster files with data that I can't share. I'm trying to create a new project loading pro...
-
- ok, I will divide this issue in four single childs tasks.
Thank you!
-
- I forgot to mention that it would be best to make one pull request for each improvement. So in case one of them is no...
-
- Ok, thank you very much
-
- Hi Alvaro,
Thank you for looking into this issues and contributing.
The best thing to do is to open a pull request ...
2013-09-29
-
- I don't think it's a QGis Web Client problem. Browsing the wms-url without using the web client doesn't return result...
-
- Carl Defevere wrote:
> The query is generated by pressing the 'Search'-button in the QGIS Web Client.
>
> It used to... -
- The query is generated by pressing the 'Search'-button in the QGIS Web Client.
It used to work in the 1.8 version.
... -
- The render of geometries for vector layers in qgis can be optimized.
There are some tricks that sure make fast the r... -
- I can't confirm the instant crash. But I confirm the crash when identifying the *reprojected* WMS layer and clicking ...
-
- The main WMS address is:
http://www502.regione.toscana.it/wmsraster/com.rt.wms.RTmap/wms?map=wmsambamm -
- QGIS 2.0.1/master crashes when identifying reprojected WMS layer, see #5896-10
This issues do not affect qgis 1.8,... -
- QGIS 2.0.1/master crashes when identifying reprojected WMS layer, see #5896-10
This issues do not affect qgis 1.8,... -
- QGIS 2.0.1/master crashes when identifying reprojected WMS layer, see #5896-10
This issues do not affect qgis 1.8,... -
- QGIS 2.0.1/master crashes when identifying reprojected WMS layer, see #5896-10
This issues do not affect qgis 1.8,... -
- 1. load
url=http://www502.regione.toscana.it/wmsraster/com.rt.wms.RTmap/wms?map%3Dwmsambamm/rt_ambamm.idcomuni.rt.po... -
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > The identify of WMS layers does not seems to work at all in 2.0.1... -
- Giovanni Manghi wrote:
> The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr... -
- Giovanni Manghi wrote:
> The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr... -
- Giovanni Manghi wrote:
> The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr... -
- Giovanni Manghi wrote:
> The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr... -
- Giovanni Manghi wrote:
> The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr... -
- The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr off.
Attached examples,... -
- The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr off.
Attached examples,... -
- The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr off.
Attached examples,... -
- The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr off.
Attached examples,... -
- The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr off.
Attached examples,... -
- The identify of WMS layers does not seems to work at all in 2.0.1 and master, even with otfr off.
Attached examples,... -
- Please check again in OSGeo4W
-
- With the addition of support for schemas in the "import into postgis" tool of sextante/processing the SPIT tool (unma...
-
- The default style for face_seed layer (maybe all label layers?) in topology viewer subplugin of db_manager seems to b...
-
- bug appears to be fixed in 2.1.0 Master (though the new north-oriented CRS definitions Tim added don't appear yet)
-
- I have a Model in which I intersect 1 vector with 17 other vectors. Everytime I run it I have to indicate the 17 vect...
-
- Bernd Vogelgesang wrote:
> I have to report that this issue also occurs with 2.01 stable, so not only master is affec... -
- As a probable consequence, there is no GRASS plugin in the qgis 32 bit standalone installer.
-
- As a probable consequence, there is no GRASS plugin in the qgis 32 bit standalone installer.
-
- Still an issue with 2.x
QGIS versija 2.1.0-Master QGIS code revision b2396f6
Compiled against Qt 4.8.5 Running agains... -
- The problem is the double-click, which causes the crash. I've reported this a while ago but unfortunately it hasn't b...
-
- The problem is the double-click, which causes the crash. I've reported this a while ago but unfortunately it hasn't b...
-
- The problem is the double-click, which causes the crash. I've reported this a while ago but unfortunately it hasn't b...
-
03:41 AM Bug report #8716: QGIS crash setting out parameter in Processing graphical modeler
- :)
opening with double-clilk generate crash
opening with edit doesn create crash
why? I can't investigate in this mo... -
- > 5) reopen r.aspect and set output => then crash
When you did this, did you double-click on "r.aspect" ou did you p... -
- Already for some time QGIS is offering a nice feature - to specify layer source if current source is wrong while open...
-
2013-09-28
-
- Tested on Windows (osgeo4w, qgis 32bit), not confirmed. I will do also on Ubuntu.
-
- Tested on Windows (osgeo4w, qgis 32bit), not confirmed. I will do also on Ubuntu.
-
- QGIS version 2.0.1-Dufour
QGIS code revision d57fe58
code from branch release-2_0
reproducible doing these steps in ... -
- I have to report that this issue also occurs with 2.01 stable, so not only master is affected.
Today within a course... -
- Paolo Cavallini wrote:
> Need support redirects to the DE page:
> http://www.qgis.org/de/site/forusers/commercial_sup... -
- Hi Mikhail,
If you work with master branch builds, please test "commit 121d76e2a":#121d76e2
It works for me on Mac.... -
09:56 AM Bug report #8714: Virus in QGIS 2.0.1 & 2.1.0 windows installer.
- Trojan/Obfuscated.bgpu
-
- http://www.jiangmin.com/
sqlite3.dll from official site works for me.
I have no time to care about these things.
Che... -
- It may be a false alarm and therefore issues like this could perhaps be discussed first on the users mailing list. Up...
-
-
- Most likely a false positive. What is the software used and what is the warning.
-
- Virus in QGIS 2.0.1 & 2.1.0 windows installer.
The file "sqlite3.dll" reported to virus.
I download newest sqlite3.d... -
- QGIS windows installer. 2.1.0 & 2.0.1
Grass could launch with "libintl-8.dll" in none English environment. -
-
- Where does the query come from? It is not a valid GetFeatureInfo query because it is missing BBOX, X and Y parameters...
-
02:46 AM Feature request #8706: Diagram placement: make "Show all" the default, and easier to change
- Thank You very much. I've found "show all" option for charts after two hours or so spent with google ;-) So, it's not...
2013-09-27
-
- There is certainly something wrong, but is gdal(warp) that does not get the job done, in this case qgis is just a GUI...
-
- There is certainly something wrong, but is gdal(warp) that does not get the job done, in this case qgis is just a GUI...
-
- There is certainly something wrong, but is gdal(warp) that does not get the job done, in this case qgis is just a GUI...
-
-
03:49 PM Bug report #7460: CMake detecting wrong path for GDAL library on 64-bit RHEL 6
- Dave Johansen wrote:
> Giovanni Manghi wrote:
> > Still true with qgis 2.0.1 code?
>
> No. I just tested qgis 2.0.1 ... -
- Giovanni Manghi wrote:
> Still true with qgis 2.0.1 code?
No. I just tested qgis 2.0.1 on 32-bit and 64-bit RHEL 6.4... -
- Paolo Cavallini wrote:
> Confirmed here, on several machines, both Windows and Ubuntu. Unclear why it is slower on so... -
- Confirmed here, on several machines, both Windows and Ubuntu. Unclear why it is slower on some machines than others. ...
-
- Confirmed here, on several machines, both Windows and Ubuntu. Unclear why it is slower on some machines than others. ...
-
- Confirmed here, on several machines, both Windows and Ubuntu. Unclear why it is slower on some machines than others. ...
-
- Processing is a default plugin, right? If it is so, during compilation time is necessary to check for it's dependenci...
-
- Hi,
Like Jürgen mentions, you currently only need to ensure the Python module is installed (though the C++ lib _may_... -
- There's nothing to compile - just the python console depends on @QSci@.
-
- Today's (and already for some time) master spits an error on startup about missing Qsci, but cmake doesn't complain a...
-
- Debian, self packaged with debian/rules. Do not know whether this could be the source of the problem (which should be...
-
- What platform? They are there for me.
-
- What's new and Licence are empty
-
- Gold sponsor should be bigger than silver, bigger than bronze.
The medals are wrong, maybe better replace with simple... -
- Need support redirects to the DE page:
http://www.qgis.org/de/site/forusers/commercial_support.html
The rest looks ... -
- Redirects in place - please check if there are still broken links.
-
- Due to the restructuring of the website, most links in the About menu are now broken , including:
* those in QGIS sp... -
- fixed in commit:4e2d1482361ca2441c76667e89cb2393563687f5 and commit:6faa102d5578f69bf3262571663eae60ddeedaab
-
- fixed in commit:4e2d1482361ca2441c76667e89cb2393563687f5 and commit:6faa102d5578f69bf3262571663eae60ddeedaab
-
- Can you share a problematic project?
-
- Can you share a problematic project?
-
- Can you share a problematic project?
-
- I'm trying to open my old 1.8 project but QGIS 2.0.1 doesn't load most of the layers. "Handle bad layers" window app...
-
- We miss North arrows - please add some. Very important especially for print layouts.
-
- I'm trying to import OSM data with the new importer, but I get a problem: the bounding box has to be specified in 432...
-
- Current method is far too cumbersome, and I do not see a reason why the steps could not be automated.
-
- Current method is far too cumbersome, and I do not see a reason why the steps could not be automated.
-
- Current method is far too cumbersome, and I do not see a reason why the steps could not be automated.
-
- See #8706
-
- While the default of not showing overlapping elements makes sense for labels, it is less reasonable for diagrams, whe...
-
- Steps to reproduce:
# Create composer
# Adjust paper size in Composition tab, e.g., 4"x6"
# Save(?)
# Duplicate comp... -
- rejected.
See : https://github.com/qgis/QGIS-Website/issues/102 -
- Beginning from version 1.10 GDAL has an OSM driver which converts OpenStreetMap data into traditional GIS layers and ...
-
- works as expected on qgis 2.0
-
- works as expected on qgis 2.0
-
- it works fine on qgis 2.0, please reopen if necessary.
-
- it works fine on qgis 2.0, please reopen if necessary.
-
- Jigdo Stunk wrote:
> That is a lame excuse for leaving a bug languishing for years. How many more YEARS do we have t... -
02:15 AM Bug report #3975: PDF exports on OSX always convert text to outlines
- While I do certainly do not agree with the tone of the previous commenter, I must admit I am also rather disappointed...
-
- Benoît Couillet wrote:
> I tried and it didn't work.
>
> I had never used ogr2ogr before so I'm not sure I did it we... -
- Benoît Couillet wrote:
> I tried and it didn't work.
>
> I had never used ogr2ogr before so I'm not sure I did it we... -
02:05 AM Bug report #8687: shape layers saved as .tab don't work in Mapinfo when there are decimals fields
- I tried and it didn't work.
I had never used ogr2ogr before so I'm not sure I did it well (you can check on jointed ...
2013-09-26
-
> when set a new file name it (qgis) start to create a new spatialite , and this tkae many second.
> On my pc about ...-
- I cannot replicate on both Windows and Linux (also the server was tested on Windows and Linux). Please provide more d...
-
- In Qgis 2.01 pie charts do not appear for every data point. It depends on map scale and scaling method, when charts a...
-
- it looks the same to me. How rasters are handled changed a lot in qgis 2.0, you will have to look into raster propert...
-
- it looks the same to me. How rasters are handled changed a lot in qgis 2.0, you will have to look into raster propert...
-
- it looks the same to me. How rasters are handled changed a lot in qgis 2.0, you will have to look into raster propert...
-
- New description:
JPG rasters QGIS 2.0 (and master) 64bit for WIndows are rendered incorrectly. -
- New description:
JPG rasters QGIS 2.0 (and master) 64bit for WIndows are rendered incorrectly. -
- New description:
JPG rasters QGIS 2.0 (and master) 64bit for WIndows are rendered incorrectly. -
- Why is Target changed to 2.2.0 ? I pushed the fix _also_ to the 2.0 branch
-
12:35 PM Bug report #3975: PDF exports on OSX always convert text to outlines
- That is a lame excuse for leaving a bug languishing for years. How many more YEARS do we have to wait to fix what ha...
-
- Jigdo Stunk wrote:
> I found issue 3975 listed in the changeset at https://issues.qgis.org/wiki/quantum-gis/New_Labe... -
- I found issue 3975 listed in the changeset at https://issues.qgis.org/wiki/quantum-gis/New_Labeling_changes_and_road...
-
- Hello Jigdo,
This issue is not fixed. The release notes are incorrect if it is indicated that the issue was fixed. P... -
- Hello Jigdo,
This issue is not fixed. The release notes are incorrect if it is indicated that the issue was fixed. P... -
> The release notes said it was fixed, but the problem still exists.
weird. if this ticket was now closed then I su...-
- This is most certainly NOT FIXED. It wasn't fixed in 1.9 development, and it is not fixed in 2.1 development, and it...
-
- With today's update, the QGIS official repository for Debian switched to 2.1.0-Master:
qgis:
*** 2.1.0+git20130925+... -
- 'Most used' is relative to one's workflow. The layout of that section was set according to the order of the app using...
-
-
- #c222c67
-
- QtGui.QMessageBox.information(None, "Clicked coords", "layer: [% $layerid %]\
coords: ([% $clickx %],[% $clickx %])")... -
- Please try do the conversion from the command line with ogr2ogr and see of the result is ok
ogr2ogr -f "MapInfo Fil... -
- Please try do the conversion from the command line with ogr2ogr and see of the result is ok
ogr2ogr -f "MapInfo Fil... -
- Hi,
Sometimes, shape layers saved as .tab in Qgis don't work with MapInfo and make it closing immediately.
I teste... -
- Yes, it is still around... the first selection/click fails to select a CRS, the following work. Very boring in real l...
-
- Yes, it is still around... the first selection/click fails to select a CRS, the following work. Very boring in real l...
-
- Yes, it is still around... the first selection/click fails to select a CRS, the following work. Very boring in real l...
-
- Yes, it is still around... the first selection/click fails to select a CRS, the following work. Very boring in real l...
-
- This still happens in 2.0.1
-
- When double clicking on a table/file/layer to add it from its respective dialog, one of several possible things happe...
-
- On Windows next to the "X" (close) icon there is a "?" icon on many panels. I.e. the Settings → options one.
... -
- (Possibly related to #8423 - but looks like it's not so a new issue)
Windows 7 - QGIS 2.0.1
* Open the processing pa... -
- When saving a path, better save duration and length of trip as attributes
-
- When saving to a temporary layer, nothing is saved, apparently.
-
- I agree with Jonathan. The names should be the same on Processing and Raster. Even more so if the devs decide to get ...
-
- Of the wrong ones listed on the GDAL menu, the only one of them I can see on the raster menu (simplified interface) i...
-
- I'm disagree (or partly agree). Most tools use same names as tools from "Raster" menu.
-
- The GDAL tools (Advanced interface) mostly don't have descriptive names. Almost every other tool from other sources d...
-
- Alexander Bruy wrote:
> Please, post tickets in Processing bugtracker, not in QGIS one. It is hard to track tickets i... -
- Jonathan Moules wrote:
> Relatedly - "GDAL" -> "Analysis" -> fillnodata has no icon at all. The others seems fine.
P... -
- Jonathan Moules wrote:
> This issue happens in the "Simple interface" for me.
This is your fault then :-), you have t... -
- Relatedly - "GDAL" -> "Analysis" -> fillnodata has no icon at all. The others seems fine.
-
- Just looked into it further - it's not a problem in the "Advanced interface" (not seen that before) - I guess that's ...
-
- Reopening it. Actually I had noticed that sometime ago, but I didn't fill an issue report
Alex, maybe a problem or r... -
- Works fine in master.
-
- Works fine in master.
-
- In the Processing toolbox (2.0.1), there is a "Geoalgorithms" which has a cog symbol.
There's also model - model symb... -
- I went to Settings->Options.
Selected the "CRS" tab and clicked the "help" button. The help that comes up says:
... -
- Possibly the same issue, but in 2.0.1, *every* time I make the processing toolbox less wide, the window fails to upda...
-
- The Web and Plugins toolbars are still empty in the 2.0.1 release too.
-
- The Help menu has a "What's this" icon (arrow plus questionmark). I tried it but it seems almost nothing has an entry...
-
- In the right-click menu that brings up the toolbars, there's one for "toolbox" (old sextante?). It has a cog icon
Tw... -
- Not sure if this qualifies as a bug or feature request.
My Oracle is listing several hundred tables (500?), the prob... -
- Pascal Boulerie wrote:
> Thanks. I could not have figured it out by myself, because there is no « About this website ... -
- Jürgen Fischer wrote :
> For issues with the website
> the github tracker is used: https://github.com/qgis/QGIS-Webs... -
-
- For issues with the website the github tracker is used: https://github.com/qgis/QGIS-Website/issues
-
- Re : searching for help and documentation in the QGIS site - search tool bug (any lowercase and uppercase distinction...
-
-
- +1. I really like label design. And we also should find a less redondant UI for rotation / proportion advanced optio...
-
- I think the data defined properties should follow the same UI pattern as the data defined labels. The workflow that ...
-
-
- For issues with the website the github tracker is used: https://github.com/qgis/QGIS-Website/issues
-
- Re : [feature request] Automatic redirections from language code subdirectories URLs ?
There are no automatic index... -
- Re : searching in the help and documentation - highlighting a word in a search result on the website QGIS.org ?
The... -
- does the .qgis2 folder have the necessary permissions?
here does not happens (I'm on Ubuntu).
You may want to inves... -
- See attached (Mostra tutte.. and the following lines are cut.
-
- It will be good to be able to use expressions also for diagrams, as they are for labels etc.
-
- In the data entry widgets, the Date type misses a default, so no data are entered unless the user insert a format. Be...
2013-09-25
-
- Markus, I'm not developing it, no. But I'm maintaining it (unfortunately needed as QGIS API changes more often than I...
-
01:24 AM Feature request #3483: Unified topological editing
- Sandro Santilli wrote:
> FYI: I've started a project on github for postgis topology editing. At least will serve for ... -
01:11 AM Feature request #8672: Add an option to modify datasource string on a query layer properties window
- I omitted yesterday to explain that I use DBManager to create those custom query table.
So this feature could as well... -
- *+Context+*
To create statistical map I often use read only postgis query that involve server side computations and ... -
- The option should be selected also when clicking on the name of the Property, not only on the checkbox.
The first col... -
-
- The most used box (add SVG path) is at the bottom. Better move it at top.
-
- In some dialogs (e.g. for labels) the button Add expression is shown with a (rather counterintuitive) epsilon, in oth...
-
12:48 PM Bug report #8620 (Closed): Quantum GIS 1.8 removed after updates in Debian Wheezy
- QGIS 2.0.1 was successfully installed in Debian Wheezy i386 after updates via qgis.org repositories.
Thanks a lot f... -
- QGIS 2.0.1 was successfully installed in Debian Wheezy i386 after updates via qgis.org repositories.
Thanks a lot f... -
12:04 PM Bug report #6438: grass641 is not available
- still have those errors on a new build ubuntu precise pangolin system and using the installation steps in the qgis do...
-
10:54 AM Feature request #8671: Please make Open Street Map import easier
- Ok, I managed to complete the three steps and the chosen layer does appear on the canvas. This process is much less s...
-
- Please note you don't "import topology from the osm file into a spatialite file" in one step. First you import the to...
-
- There are numerous things that don't seem to work with the new Open Street Map importing feature in 2.0.The CRS of th...
-
- Same for WGS72
-
- In Project properties>General, the list of entries for ellipsoid has a duplicate entry: WGS 84 and WGS84, apparently ...
-
- My mistake - this is already in there and no TNS_ADMIN is needed. It's not "SID" that is used, it's SERVICE_NAME. Apo...
-
- Did you set the @TNS_ADMIN@ environment variable to the directory where your @tnsnames.ora@ is?
-
- Currently (2.0.1) to connect to Oracle you need to know the Host details (IP and port). This is redundant because it ...
-
- Using Oracle 10g here (though with the 11 client).
The TNSnames entry looks like this:
co_gistest.world =
(DESCRI... -
- Jonathan Moules wrote:
> Back on topic - the bug is that using SID (with a host and port) doesn't work even though it... -
- I actually have that as a feature request in #8666
---
Back on topic - the bug is that using SID (with a host and p... -
- Jonathan Moules wrote:
> My Oracle isn't on localhost.
>
> Leaving the Host or Host-and-Port blank while filling in ... -
- My Oracle isn't on localhost.
Leaving the Host or Host-and-Port blank while filling in the SID results in an ORA-121... -
- Do you specify only the SID and no host? SIDs are not required to be unique across hosts - so I suppose specifying ...
-
- The oracle connection help says:
"Database" - SID or SERVICE_NAME of the Oracle instance.
However, if I enter a val... -
05:58 AM Bug report #8667 (Closed): GDAL WMS raster display issues in 2.0.1
- The GDAL WMS for this XML link (http://aerial.openstreetmap.org.za/aerial-osm-org-za-tiles.xml) worked perfectly in 1...
-
- Hi.
I found this really bad boring bug.
If a put my svg symbol in a sub-sub-folder of an external path
(please noti...
2013-09-24
-
- Bo Victor Thomsen wrote:
> I would suggest a cleanup of both the 32-bit and 64-bit standalone installation packages a... -
- As a followup on Jukka's observations, I've tried to do the same on my _64_ bit windows installation of QGIS 2.0.1. W...
-
- jratike80 - wrote:
> As a result of this packaging problem I could not start at all brand new QGIS 2.0.1 by running t... -
- jratike80 - wrote:
> As a result of this packaging problem I could not start at all brand new QGIS 2.0.1 by running t... -
- As a result of this packaging problem I could not start at all brand new QGIS 2.0.1 by running the Windows installer ...
-
12:55 AM Bug report #8649: bad metadata in the debian repository
- resolution: invalid?
please note that you've changed the repo with the correct files now, which has fixed the proble... -
-
- it works now, thanks!
-
- recheck please
-
- Steps to reproduce:
1. Create a new project
2. Add two vector layers (number is irrelevant)
3. Create a new composer ... -
- duplicate of #8651
-
- duplicate of #8651
-
- Straight forward: legend element broken.
Steps to reproduce:
1. Create a new project
2. Add two vector layers (numbe... -
07:17 PM Bug report #8662 (Closed): Using the "New bookmark" it crashes QGIS 2.0
- When I click "New bookmarks" shows error:
!http://i.imgur.com/3KE8C4h.png!
When I click "OK" QGIS crashes.
Afte... -
05:01 PM Bug report #8639 (Closed): QGIS 2.0.1 windows build - matplotlib requires dateutil
- Yup .. that's fixed it. Brilliant. Thanks
-
- recheck please
-
- Martin Jung wrote:
> Okay, manually downgrading to 4.13.3-2 at least resolved the sip-api-8.1 error. But now a lot of... -
- Martin Jung wrote:
> Okay, manually downgrading to 4.13.3-2 at least resolved the sip-api-8.1 error. But now a lot of... -
03:15 PM Bug report #8650: QGIS 2.0.1 - python-qgis-common broken with Debian Wheezy sources
- Strange, maybe because iam using a newer version? I could try to downgrade to your version and see if this helps for ...
-
- Martin Jung wrote:
> The Debian sources now show qgis 2.0.1-2+wheezy as source at least for me.
> However the python-... -
- The Debian sources now show qgis 2.0.1-2+wheezy as source at least for me.
However the python-qgis bindings still can... -
- Guilherme Ferrari wrote:
> Hi. I am facing the same problem with Debian Wheezy i386. Checking the repositories it see... -
- applied in commit:2301c914 and commit:6f9795b0b
-
- applied in commit:2301c914 and commit:6f9795b0b
-
- fixed in commit:b3685ee1 and commit:cb31e14c
-
- recheck please
-
- added to the repository
-
- duplicate of #8629
-
- duplicate of #8629
-
- Jürgen Fischer wrote:
> try installer 2.0.1-2
already done. see #8629-9, but to be sure I have re-done the test, ... -
- try installer 2.0.1-2
-
- see also #8659
-
- see also #3794
-
- see also #3794
-
- see also #3794
-
- great work on qgis
but cannot insert raster image with rotated worldfiles
on WGS 84 - UTM Zone 32Nord EPSG 32632
wo... -
-
- duplicate of #8629
-
09:56 AM Bug report #8658 (Closed): Startup Windows 7 Runtime error
- Windows 7 64bit
Qgis 2.0.1
Show error then start normally
!Immagine_1.jpg! -
- Raster pictures (.jpg) in the georeferencing modul in QGIS 2.0 64bit and master are shown with coloured stripes. The...
-
- I see a problem using the
menu commando:
new -> new spatialite layer
when set a new file name it (qgis) start to cr... -
07:41 AM Bug report #8657 (Closed): Error in DB Manager SQL Window with
- While trying to open SQL Window with a Postgis Database, I get the error below.
I can see that there are some proble... -
- My WMS GetFeatureInfo Filter (QGis Server 2.0.1) returns no results while there should be.
(The Identify GetFeatureIn... -
- QGIS master now has the ability to select items hiding below other items by ctrl-clicking items. There's also menu it...
2013-09-23
-
- it works for me here, for example with the epsg codes I'm used to use. Can you post a url to a wms with layers availa...
-
- it works for me here, for example with the epsg codes I'm used to use. Can you post a url to a wms with layers availa...
-
- it works for me here, for example with the epsg codes I'm used to use. Can you post a url to a wms with layers availa...
-
- it works for me here, for example with the epsg codes I'm used to use. Can you post a url to a wms with layers availa...
-
11:00 PM Bug report #8655 (Closed): Add WMS doesn´t respect chosen Project CRS
- In 1.8 and 1.9 a had a workflow NewProject>Project properties> Name and CRS automatic
Then Open WMS
The Open WMS the... -
- Guilherme Ferrari wrote:
> Please, does anyone knows if packaging for Quantum GIS for Debian (i386 architecture) is d... -
- Please, does anyone knows if packaging for Quantum GIS for Debian (i386 architecture) is discontinued? Currently qgis...
-
- duplicate of #8637
-
- duplicate of #8637
-
06:30 PM Bug report #8653 (Closed): 2.0.1-Dufour Microsoft Visual C++ Runtime Error
- I have 64 bit W7, and a new install of QGIS 2.0.1, with an error on start, when or after "Restoring loaded plugins". ...
-
- raster layer -> properties -> transparency -> custom transparency options -> transparent pixel list is blank / not ca...
-
- Hi. I am facing the same problem with Debian Wheezy i386. Checking the repositories it seems that the following packa...
-
- Although not much different from content i just made the switch from the QGIS 1.9 dev. version to the 2.0 stable to h...
-
- Alexandre Neto wrote:
> I can still experience this problem while using identify in a polygon with over 20k vertex. T... -
- Can you try to verify this on another system?
The 32 bit windows version is still using an older Qt version which co... -
- I can still experience this problem while using identify in a polygon with over 20k vertex. This happens only at bigg...
-
- The http_proxy environment variable did the trick - not sure how you can handle that all within QGIS, but that defini...
-
- I can tell you that the plugin installer worked fine with my proxy settings, for what it's worth.
-
- The proxy settings only apply to networks requests QGIS does directly, not those done via OGR. I think OGR uses libc...
-
12:16 PM Bug report #5212: Proxy settings ignored for layers
- This ticket might relate #8600. Note the plugin installer is not working correctly with the proxy server in 2.0 now.
-
-
- Doesn't appear to work any better in 2.0 for me...It looks like it's behaving exactly like before - no attempt to con...
-
- This is now fixed in QGIS 2.0
-
- Here's another related ticket #5212
-
10:47 AM Bug report #8637: error (not blocking) when launching qgis 64 bit on Windows
- Hi I'm getting the same thing when I installed my 64bit- WIndows versions. I can start QGIS, however sometimes when I...
-
- subject says it all. They work in qgis 2.0.1
-
- The package repository comes with an outdated configuration file for debian wheezy.
It's therefore impossible to inst... -
- My Oracle connection doesn't work - for whatever reason whenever I try and "Connect" I get "ORA-12514 - TNS listener ...
2013-09-22
-
12:42 AM Bug report #8629: QGIS Dufour 2.0.1 32 or 64 crash at startup on Windows 7 64
- Oops, sorry. Thanks to Jürgen, I made a mistake !
Hope it will works for you Giovanni. Personally, I didn't install ... -
- You have to thank Jurgen :)
Glad it works for you, here I still get that message? maybe I'm missing something to be ... -
- Jürgen Fischer wrote:
> Try 2.0.1-2 from @osgeo4w-setup-(x86|x86_64).exe -t@ and/or "standalone":http://www.qgis.org/... -
> Try 2.0.1-2 from @osgeo4w-setup-(x86|x86_64).exe -t@ and/or "standalone":http://www.qgis.org/downloads/tests/
sam...-
- Giovanni Manghi wrote:
> I spent the day testing any available qgis 2.0/master installer for Windows.
>
> I used a c... -
12:05 AM Bug report #8647: Labeling with 'Capitalize first letter' does not work with all Caps
- You can reproduce this with the following GeoJSON:...
-
- I have tried this with a shapefile as well as a PostGIS layer. I have a layer with a field which has text in all Caps...
-
- I maintain the VectorFieldRenderer widget, which implements a python custom renderer. The QGIS 2.0 version is workin...
-
- Pull merged in both 2.0 branch (commit:e02b88b) and master (commit:770feee).
-
- Pull merged in both 2.0 branch (commit:e02b88b) and master (commit:770feee).
-
- Pull merged in both 2.0 branch (commit:e02b88b) and master (commit:770feee).
-
12:24 PM Bug report #8642: topoviewer: directed edge layer lost direction indicators
- Sandro Santilli wrote:
> Salvatore: I assigned to you, since you noticed first :>
... and I already had assigned to ... -
- Thanks Giovanni, updated Target version and Affected version.
-
- Thanks Giovanni, updated Target version and Affected version.
-
- Can't run models with utf-8 characters in description:
AlgorithmExecutionDialog.__init__(self, alg, self.scrollA... -
- closing as requested by submitter.
-
- closing as requested by submitter.
-
- closing for lack of feedback.
-
- closing for lack of feedback.
-
- Seem to be works as expected, at least on qgis 2.0, Please reopen if necessary.
-
- Seem to be works as expected, at least on qgis 2.0, Please reopen if necessary.
-
- Closing for lack of feedback, reopen if necessary.
-
- Closing for lack of feedback, reopen if necessary.
-
-
- this is fixed, at least in qgis 2.0.
-
- this is fixed, at least in qgis 2.0.
-
- I cannot confirm this, I use this tool a lot of times. Please reopen if necessary (if confirmed in qgis 2.0).
-
- I cannot confirm this, I use this tool a lot of times. Please reopen if necessary (if confirmed in qgis 2.0).
-
- closing for lack of feeback, without a better description it is not possible to make the necessary checks. Reopen if ...
-
- closing for lack of feeback, without a better description it is not possible to make the necessary checks. Reopen if ...
-
- works as expected here, at least on qgis 2.0
-
- works as expected here, at least on qgis 2.0
-
- not long ago I made a bunch of tests and resumed here
https://issues.qgis.org/wiki/quantum-gis/Gps_units_download_da... -
- not long ago I made a bunch of tests and resumed here
https://issues.qgis.org/wiki/quantum-gis/Gps_units_download_da... -
- Still true with qgis 2.0.1 code?
-
- Still true with qgis 2.0.1 code?
-
- The ticket filed upstream has been fixed, I guess this can be closed.
-
- The ticket filed upstream has been fixed, I guess this can be closed.
-
- Still true with the qgis 2.0 installers?
-
- still true with qgis 2.0?
-
- still true with qgis 2.0?
-
- if the issue was already fixed in master when the ticket was filed then I assume it should be ok also in qgis 2.0. In...
-
- if the issue was already fixed in master when the ticket was filed then I assume it should be ok also in qgis 2.0. In...
-
- old labeling is gone for good.
-
- old labeling is gone for good.
-
- seems ok now, at least on qgis 2.0
-
- seems ok now, at least on qgis 2.0
-
- Yes it is a regression since 1.8, see attached db which contains one table - features can be added in qgis 1.8 but n...
-
- seems fixed, at least in qgis 2.0
-
- seems fixed, at least in qgis 2.0
-
- closed for lack of feedback.
-
- closed for lack of feedback.
-
- This has been fixed in qgis 2.0
-
- This has been fixed in qgis 2.0
-
- Cannot confirm too, never seen this issue on Linux or Windows.
-
- Cannot confirm too, never seen this issue on Linux or Windows.
-
- seems fixed, at least in qgis 2.0.
-
- seems fixed, at least in qgis 2.0.
2013-09-21
-
- Now it throws and error
@Unable to communicate with QGIS Version server
Unknown network socket error: 203@ -
- Now it throws and error
@Unable to communicate with QGIS Version server
Unknown network socket error: 203@ -
- Now it throws and error
@Unable to communicate with QGIS Version server
Unknown network socket error: 203@ -
- EPSG code(s) 4073-4075 now shows in qgis 2.0
-
- EPSG code(s) 4073-4075 now shows in qgis 2.0
-
- In QGIS 2.0 it works as expected.
-
- In QGIS 2.0 it works as expected.
-
- seems fixed to me, at least on qgis 2.0.
-
- seems fixed to me, at least on qgis 2.0.
-
- Works ok here, at least on qgis 2.0. Reopen if necessary.
-
- Works ok here, at least on qgis 2.0. Reopen if necessary.
-
- This is definitely fixed, at least in 2.0 (but probably also in 1.8).
-
- This is definitely fixed, at least in 2.0 (but probably also in 1.8).
-
-
- I added the new target version.
-
- Styles template dir: qgis/python/plugins/db_manager/db_plugins/postgis/plugins/qgis_topoview/templates
-
- Line decoration support was intentionally removed from QGIS. Same thing can be done with a line marker:
http://i.imgu... -
- Four weeks from now, the next version of Ubuntu, 13.10, will be released. It would be good for QGIS's repository to h...
-
- - Ability to Save/Load profiles (especially useful when using RegEx delimiter)
- Ability to set conditions on Number ... -
- Sorry to insist on this, but is there anything I can do using the QGIS official repository for Debian?
Thanks. -
- if I try to import a shapefile into an old SL database (ex: http://www.gaia-gis.it/spatialite-2.3.1/test-2.3.zip ) I ...
-
- Hi Giovanni. I never installed the standalone 1.8, so don't know whether it was required or no. Brief research indi...
-
- This dependency was ok in qgis 1.8 on Windows?
-
- Hi
The standalone windows installer for QGIS includes the python matplotlib module required for (among other things... -
- adding sample SL db, one "good" and one not, both created with the same qgis installation (osgeo4w).
-
- adding sample SL db, one "good" and one not, both created with the same qgis installation (osgeo4w).
-
- This is so frustrating... now I removed qgis 2.0/standalone, cleaned the system and installed again qgis 2.0/osgeo4w ...
-
- This is so frustrating... now I removed qgis 2.0/standalone, cleaned the system and installed again qgis 2.0/osgeo4w ...
-
- so after all this seems a packaging issue.
-
- so after all this seems a packaging issue.
-
- update: on qgis 2.0 installed with osgeo4w is ok, the described issue appear just on qgis 2.0 installed with the stan...
-
- In QGIS 2 with DB manager the Spatialite layers are shown as they were geometry less tables and are added as such.
D... -
- I spent the day testing any available qgis 2.0/master installer for Windows.
I used a clean windows 7 machine and af... -
- is this a regression since 1.8? Does this happens on 2.0, master or both?
-
- it has already been noticed by the devs
http://lists.osgeo.org/pipermail/qgis-developer/2013-September/028474.html
... -
- it has already been noticed by the devs
http://lists.osgeo.org/pipermail/qgis-developer/2013-September/028474.html
... -
- The delimited text capability was moved to core in 2.0 - somehow the old plugin is still be packaged with OSGeo4w
-
- !QGIS_Error.png!
installed with the standalone installer or the osgeo4w one. -
- I have run a tests on every installer available for Windows. These are my findings
-------------------
I have run a ... -
- see also #8634
-
Also available in: Atom