Activity

From 2017-09-30 to 2017-10-29

2017-10-29

11:58 PM Bug report #17351: Link failure on OS without thread local storage: I can't recall if that was the only change required, but I'd start with that and see if it compiles OK and the transf... Nyall Dawson
06:20 PM Bug report #17351: Link failure on OS without thread local storage: I have a bit of a hard time diffing the commits in 2.18 and master for that feature - you mean just replacing thread_... landry Landry Breuil
08:39 AM Bug report #17351: Link failure on OS without thread local storage: You may have luck by ifdefing in QThreadStorage for bsd. This is what's used in the 2.18 backport - see commit:af3370... Nyall Dawson
10:49 PM Bug report #17348: Right clicking layer in canvas causes zoom out to 1,000,000: OK
my computer isn't doing it now, it was doing it yesterday when I was able to capture the video clip
so some weir... Patrick Dunford
10:59 AM Bug report #17348: Right clicking layer in canvas causes zoom out to 1,000,000: Patrick Dunford wrote:
> I have tested this further and believe it is a real issue in the Linux edition of Qgis. whe... Giovanni Manghi
10:57 AM Bug report #17348: Right clicking layer in canvas causes zoom out to 1,000,000: I have tested this further and believe it is a real issue in the Linux edition of Qgis. when right clicking a layer t... Patrick Dunford
08:27 PM Bug report #17352 (Closed): QGIS Crashing on adding services in browser: Giovanni Manghi
06:20 PM Bug report #17352: QGIS Crashing on adding services in browser: It's probably same problem as in #17279-6 Tomasz Nycz
06:16 PM Bug report #17352 (Closed): QGIS Crashing on adding services in browser: QGIS 2.99 is crashing on any attempt to add new WMS or PostGIS service in Browser (probably any of them). Service is ... Tomasz Nycz
06:28 PM Bug report #17353 (Closed): DB Manager TypeError on PostGIS loading: When trying to add layer from DB Manager for any PostGIS table, traceback is thrown. On yesterday build it was crashi... Tomasz Nycz

2017-10-28

12:46 AM Bug report #17351 (Closed): Link failure on OS without thread local storage: OpenBSD doesnt have support (yet) for thread local storage, so since https://github.com/qgis/QGIS/pull/4561 the linki... landry Landry Breuil
06:05 PM Bug report #17344 (Closed): Opening the "table" tab in DB Manager cannot be canceled: Giovanni Manghi
06:04 PM Bug report #17348 (Closed): Right clicking layer in canvas causes zoom out to 1,000,000: I don't think we ca handle also idiosyncrasies of each OS :) Giovanni Manghi
06:04 PM Bug report #17348 (Closed): Right clicking layer in canvas causes zoom out to 1,000,000: I don't think we ca handle also idiosyncrasies of each OS :) Giovanni Manghi
10:57 AM Bug report #17348: Right clicking layer in canvas causes zoom out to 1,000,000: I see that the first option on a right click menu for a layer is "Zoom to layer".
This issue is possibly related t... Patrick Dunford
10:28 AM Bug report #17348 (Feedback): Right clicking layer in canvas causes zoom out to 1,000,000: In my project I am right clicking on the names of the layers in the layer list to view or change layer properties. Wh... Patrick Dunford
05:55 PM Bug report #17345 (Feedback): Graduated classification is missing lowest data value in its classes: Is this a regression? Giovanni Manghi
05:55 PM Bug report #17345 (Feedback): Graduated classification is missing lowest data value in its classes: Is this a regression? Giovanni Manghi
04:29 PM Bug report #17350 (Closed): In distance matrix a point is its own neighbour: If target point layer is the same as input point layer QGIS treats an input point as its own neighbour, but a neighbo... Pawel Stankiewicz
01:09 PM Feature request #12159 (Closed): Add Settings button to Shortest Path widget: The road graph plugin is no more, and was replaced with qgis algorithms. This bug is no longer valid. Nyall Dawson
01:09 PM Feature request #12159 (Closed): Add Settings button to Shortest Path widget: The road graph plugin is no more, and was replaced with qgis algorithms. This bug is no longer valid. Nyall Dawson
01:07 PM Feature request #12158 (Closed): Rename "Road Graph" to "Shortest Path": Fixed in 3.0 Nyall Dawson
01:07 PM Feature request #12158 (Closed): Rename "Road Graph" to "Shortest Path": Fixed in 3.0 Nyall Dawson
11:24 AM Feature request #14914 (Closed): Add a warning to Plugin manager: Superseded by #17349 Borys Jurgiel
11:23 AM Feature request #17349 (Closed): Sort out the trusted/untrusted plugins/authors stuff: Let's gather existing discussions.
*Richard said:*
_Instead of this black-white labeling I now have the idea th... Borys Jurgiel
09:58 AM Bug report #17347 (Closed): MetaSearch: Add WMS/WMTS data button broken: In MetaSearch the Add Data button is broken.
To reproduce:
- add Default servers
- select Netherlands: Nationa... Richard Duivenvoorde
08:35 AM Bug report #17346 (Closed): Composer doesn't render rasters: In #17129 I referred to an issue where rasters did not render in the composer preview unless the "Follow map theme" s... Patrick Dunford

2017-10-27

12:51 AM Bug report #13565: modifying a svg already cached doesn't invalidate the cache, renders as versio...: Håvard Tveite wrote:
> I am developing a Python plugin that is generating SVG symbols for a layer, and since I am re... Jérémy Billant
06:41 PM Feature request #14914: Add a warning to Plugin manager: See https://github.com/qgis/QGIS/pull/5484 Borys Jurgiel
04:18 PM Bug report #17292: Data Source Manager: WFS loads layer two time if you use the Add button, and t...: related UX discussion https://github.com/qgis/qgis3_UIX_discussion/issues/49 Luigi Pirelli
03:57 PM Bug report #17345: Graduated classification is missing lowest data value in its classes: Can reproduce in 2.18 and master. Anita Graser
03:57 PM Bug report #17345: Graduated classification is missing lowest data value in its classes: Can reproduce in 2.18 and master. Anita Graser
03:50 PM Bug report #17345 (Closed): Graduated classification is missing lowest data value in its classes: Load the attached GeoJSON file.
Select a Graduated style for the Alle_2012 field. Any mode is fine.
The low value t... Johannes Kroeger
02:19 PM Bug report #17344: Opening the "table" tab in DB Manager cannot be canceled: duplicate of #15104 Anita Graser
02:16 PM Bug report #17344: Opening the "table" tab in DB Manager cannot be canceled: Thanks Giovanni! What kind of feedback do you need from me? Anita Graser
02:00 PM Bug report #17344 (Feedback): Opening the "table" tab in DB Manager cannot be canceled: A while ago I filed a ticket about this (can't find it now): the table (and layer) tabs in DB manager should really b... Giovanni Manghi
01:47 PM Bug report #17344 (Closed): Opening the "table" tab in DB Manager cannot be canceled: In DB Manager, clicking the "table" tab prompts the UI to freeze until the table is loaded. This can take a very long... Anita Graser
02:11 PM Bug report #17308 (Closed): Plugins menu shows incorrect correct: Michel Stuyts
02:09 PM Bug report #17284: QGIS3: setting in snapping toolbar not highlighted: Tobias Wendorff wrote:
> If you select an entry in the new snapping toolbar (fe."active layer"), the selection is no... Harrissou Santanna
12:59 PM Bug report #17120 (Closed): Missing namespace declaration when searching by bounding box: Given this is 2.8.6 I would say your best bet here is to either upgrade QGIS or update your underlying OWSLib install... Tom Kralidis
12:59 PM Bug report #17120 (Closed): Missing namespace declaration when searching by bounding box: Given this is 2.8.6 I would say your best bet here is to either upgrade QGIS or update your underlying OWSLib install... Tom Kralidis
12:30 PM Bug report #17120: Missing namespace declaration when searching by bounding box: I've been able to reproduce this using QGIS 2.8.13, simply by opening the Search tab, clicking on Map extent and then... Andrew Wils
12:40 PM Bug report #17343 (Closed): Project Snapping Settings dialog doesn't save the dialog size: Open the Project Snapping Settings dialog.
Resize the dialog (not only the tablewidget but also the main dialog).
C... Harrissou Santanna
11:21 AM Bug report #17342 (Closed): Processing: Import into PostGIS fails with mystery error message if s...: To reproduce, try to import a dataset into a schema that hasn't been created yet.
The displayed error is "functio... Anita Graser
10:33 AM Bug report #17339 (Open): When using rule based labels the caption cannot be centred on a polygon...: Giovanni Manghi
10:26 AM Bug report #17339: When using rule based labels the caption cannot be centred on a polygon feature: No the same problem on the canvas Patrick Dunford
09:21 AM Bug report #17339 (Feedback): When using rule based labels the caption cannot be centred on a pol...: Are the labels centered in the canvas? Giovanni Manghi
07:28 AM Bug report #17339 (Feedback): When using rule based labels the caption cannot be centred on a pol...: I have a few layers with polygons that use a caption with a single letter. When the layer has just a single label for... Patrick Dunford
09:44 AM Bug report #16829: Print composer - export altas as pdf crashes QGIS: I've not been able to create a project I can attach which does this. It may be connected to using atlas expressions i... Amy Taylor
09:42 AM Bug report #17341 (Feedback): Attribute table refresh button - de-selects the selection when usin...: Try a more recent version, like 2.18.13 and see if still happens. Giovanni Manghi
09:37 AM Bug report #17341 (Closed): Attribute table refresh button - de-selects the selection when using ...: When using layers loaded from PostGIS hitting the table refresh button in the attribute table view de-selects the cur... Amy Taylor
07:39 AM Bug report #17340 (Closed): STL 3D models are always rotated by 180: When using stl models, they are always pointing downwards (z axis).
Attached is an example stl file. Saber Razmjooei
06:08 AM Feature request #16394 (Closed): Pin projects to recent projects opening window: Applied in changeset commit:qgis|edecd49b002599e065d1ec3aef528bb4f95efce6. Mathieu Pellerin - nIRV
06:08 AM Feature request #16394 (Closed): Pin projects to recent projects opening window: Applied in changeset commit:qgis|edecd49b002599e065d1ec3aef528bb4f95efce6. Mathieu Pellerin - nIRV

2017-10-26

09:25 PM Bug report #17338 (Closed): sip nested class linker error QgsVectorLayerUtils::QgsDuplicateFeatur...: qgis_core library is fine. This only happen when building python module after ... Hanif Rifai
07:15 PM Bug report #17324 (Closed): Geometries guided by advanced digitization tools snap inaccurately.: Giovanni Manghi
07:13 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: Can only assume that that's the case. Believe the defect is minor enough that it can be closed. Kyle Welsh
07:07 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: Kyle Welsh wrote:
> On clean install of 2.18.13 it's still present, but is _very_ minor (<1mm out of place).
> Mino... Giovanni Manghi
05:31 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: On clean install of 2.18.13 it's still present, but is _very_ minor (<1mm out of place).
Minor enough that the digit... Kyle Welsh
03:24 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: I cannot replicate with you project, configurations and data. Try a clean install (no 3rd party plugins, no legacy co... Giovanni Manghi
12:01 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: Have uploaded a zip of the project and line layers, with snapping settings set as they were when the defect was repro... Kyle Welsh
03:19 PM Bug report #17337 (Closed): 3D Viewer: cannot tilt camera holding down shift when docked: "tilt camera by pressing Shift and dragging the mouse with left mouse button pressed" does not work when the 3D view ... Anita Graser
02:51 PM Feature request #17336 (Open): Assume WGS84 when pasting GeoJSON: That is set to a UTM zone for me but it is not relevant to this. GeoJSON is standardised to WGS 84 nowadays. The sett... Johannes Kroeger
02:29 PM Feature request #17336 (Feedback): Assume WGS84 when pasting GeoJSON: Check you qgis general settings in the "CRS" tab: how is configured in the section "CRS for new layers"? Giovanni Manghi
02:27 PM Feature request #17336 (Open): Assume WGS84 when pasting GeoJSON: Following the GeoJSON RFC 7946's WGS 84 implication, OGR loads GeoJSON without specified CRS as WGS 84.
Please do th... Johannes Kroeger
02:25 PM Feature request #13722 (Closed): Right Click Remove from Recent Projects: Applied in changeset commit:qgis|d40447e7d0cae9aa2a3c6f76f8c4690948ec36ea. Mathieu Pellerin - nIRV
02:25 PM Feature request #13722 (Closed): Right Click Remove from Recent Projects: Applied in changeset commit:qgis|d40447e7d0cae9aa2a3c6f76f8c4690948ec36ea. Mathieu Pellerin - nIRV
02:24 PM Feature request #17335 (Open): Allow pasting of mixed-type GeoJSON: Since #9727 we can add GeoJSON from the clipboard via Edit -> Paste Features.
Sadly it does not fully support mixed-... Johannes Kroeger
01:46 PM Bug report #17314 (Feedback): export to dxf format - z dimension: Giovanni Manghi
01:44 PM Bug report #17314: export to dxf format - z dimension: Can you attach the DGN to verify that QGIS actually sees the 3D information it... Jürgen Fischer
12:54 PM Bug report #17319: v.net category value: OK, thank you.
While I was waiting for your answer, I continued my studies on the subject and concluded that the QGI... Sergio Antonio
11:21 AM Bug report #17279: Working with QgisBrowser widget makes my QGIS crash more often: Andreas, feel free to close this one and create a clean one with better backtraces.
I now have the feeling that th... Richard Duivenvoorde
11:09 AM Bug report #17279: Working with QgisBrowser widget makes my QGIS crash more often: Alessandro Pasotti wrote:
> From a quick look at the stack traces I bet that the unified dialog has anything to do w... Andreas Neumann
11:07 AM Bug report #17279: Working with QgisBrowser widget makes my QGIS crash more often: Seems like also ArcGIS server connections are affected.
See issue #17334 Andreas Neumann
09:12 AM Bug report #17279: Working with QgisBrowser widget makes my QGIS crash more often: From a quick look at the stack traces I bet that the unified dialog has anything to do with the crashes (that doesn't... Alessandro Pasotti
09:03 AM Bug report #17279: Working with QgisBrowser widget makes my QGIS crash more often: I get a reproducable crash after I add a new connection to:
* WMS
* WFS
* Postgis database
In addition I get ... Andreas Neumann
11:18 AM Bug report #17287 (Closed): OGR processing of scratch layers doesn't work: Applied in changeset commit:qgis|4a51c40821bc5adca738cab79b9b9c3672de8b7f. Alexander Bruy
11:18 AM Bug report #17287 (Closed): OGR processing of scratch layers doesn't work: Applied in changeset commit:qgis|4a51c40821bc5adca738cab79b9b9c3672de8b7f. Alexander Bruy
11:06 AM Bug report #17334: QGIS 2.99 - adding ArcGIS Map Server Layer crashed: I don't think this is related to ArcGIS map server.
Pretty much all service connections currently crash, when addi... Andreas Neumann
09:39 AM Bug report #17334 (Feedback): QGIS 2.99 - adding ArcGIS Map Server Layer crashed: Can you post an URL?
the same works fine on 2.18? Giovanni Manghi
08:14 AM Bug report #17334 (Closed): QGIS 2.99 - adding ArcGIS Map Server Layer crashed: h2. User Feedback
I want to add new ArcGIS Map Server Layer, and it crashed when saving new server connction.
h... Jadwiga Trojak
09:54 AM Feature request #17333 (Closed): Add ability to select geometry type when adding postgis unrestri...: That's already available. If you have a geometry column without geometry constraint you are offered a line without a... Jürgen Fischer
09:54 AM Feature request #17333 (Closed): Add ability to select geometry type when adding postgis unrestri...: That's already available. If you have a geometry column without geometry constraint you are offered a line without a... Jürgen Fischer
07:49 AM Bug report #17330: QGIS composer Multiline table cell formating from xslx data source: adding one or more space after . or : before carriage return fix this Arnaud Poncet-Montanges

2017-10-25

11:57 PM Feature request #17333 (Closed): Add ability to select geometry type when adding postgis unrestri...: For now you can't add a layer from postgis table with GEOMETRY(GEOMETRY) column type from "Add PostGIS Table" dialog.... Nikolay Lebedev
11:51 PM Bug report #17325: QGIS 2.99 with Network Analysis Error: Hi Nyall,
Shapefiles attached.
I renamed them for you to make sense of them.
I used the layer to point option, b... Joshua Geoghegan
10:28 AM Bug report #17325 (Feedback): QGIS 2.99 with Network Analysis Error: Can you please attach your data files? Nyall Dawson
10:28 AM Bug report #17325 (Feedback): QGIS 2.99 with Network Analysis Error: Can you please attach your data files? Nyall Dawson
10:28 AM Bug report #17325 (Feedback): QGIS 2.99 with Network Analysis Error: Can you please attach your data files? Nyall Dawson
03:30 AM Bug report #17325 (Closed): QGIS 2.99 with Network Analysis Error: Hi there,
I am testing the Processing Toolbox>Network Analysis>Shortest Path tools to find the shortest paths from... Joshua Geoghegan
10:47 PM Bug report #17319: v.net category value: Sergio Antonio wrote:
> I was really in doubt when I clicked on "bug report", but for a user who is following manual... Giovanni Manghi
08:44 PM Feature request #9405: differentiate between built-in plugins and user plugins: Harrissou Santanna wrote:
> Borys, how about using "Core plugin" instead of "system plugin"? This is how they are ca... Borys Jurgiel
10:58 AM Feature request #9405: differentiate between built-in plugins and user plugins: Borys, how about using "Core plugin" instead of "system plugin"? This is how they are called all over the documentati... Harrissou Santanna
08:23 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: Please attach the sample project (and data) taking care to attach a version that has the snapping settings that you t... Giovanni Manghi
07:05 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: Yes; snapping is set to "all visible layers".
This same issue would occur within a single layer, the red and blue ar... Kyle Welsh
06:32 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: Kyle Welsh wrote:
> Hi Giovanni,
>
> That scale was used to more clearly show the defect. The same thing will occ... Giovanni Manghi
06:30 PM Bug report #17324: Geometries guided by advanced digitization tools snap inaccurately.: Hi Giovanni,
That scale was used to more clearly show the defect. The same thing will occur at more "normal" scale... Kyle Welsh
05:48 PM Bug report #17332 (Closed): QGIS unable to save a layer with measures: QGIS seems to be unable to save vector layers with M-values (measures). I have a LineStringZM shapefile, and if I jus... TJ Rockefeller
04:37 PM Bug report #17331 (Closed): new node tool topological editing: New node tool in QGIS3 not preserving topology when I try drag by segment or insert new node at segment (Enable Topol... Jakub Kosik
01:55 PM Feature request #12292: Complete API Documentation: The coverage is getting better, but I suppose it depends on the definition of "valid". Just as my example above shows... William Wilson
01:41 PM Bug report #17330: QGIS composer Multiline table cell formating from xslx data source: Text sample
Aucun nouveau bâtiment n’est projeté dans cette zone
Passage du mazout au gaz, ou installations sol... Arnaud Poncet-Montanges
01:37 PM Bug report #17330: QGIS composer Multiline table cell formating from xslx data source: -It seems that it can't be reproduce on other data sources.-
-Problem comes probably from special char in xlsx forma... Arnaud Poncet-Montanges
01:35 PM Bug report #17330 (Closed): QGIS composer Multiline table cell formating from xslx data source: It seems like the "enveloppe le texte" option is taking the carriage return as a too long char to be displayed
alon... Arnaud Poncet-Montanges
12:06 PM Feature request #17328 (Open): Open and display "complex type" GeoTIFF: The "complex type" GeoTIFFs cannot be opened/displayed by QGIS.
The image is opened without error message but nothin... Clement Albinet
11:55 AM Bug report #17327 (Feedback): Sorting of input layer Layers in Processing "multiple inputs" widgets: This should be fixed in master - can you confirm? Nyall Dawson
10:40 AM Bug report #17327: Sorting of input layer Layers in Processing "multiple inputs" widgets: This is pretty much duplicate of #17127 but this is more general.
Is indeed a real issue: in the multiple inputs ... Giovanni Manghi
10:40 AM Bug report #17327: Sorting of input layer Layers in Processing "multiple inputs" widgets: This is pretty much duplicate of #17127 but this is more general.
Is indeed a real issue: in the multiple inputs ... Giovanni Manghi
10:16 AM Bug report #17327 (Closed): Sorting of input layer Layers in Processing "multiple inputs" widgets: In Processing Tool Box Modules such as Gdal>Misc>Merge, Gdal>Misc>Build Virtual Raster or OTB >Image Manipulation>Ima... Hans Fuchs
10:41 AM Bug report #17320: Can't filter a table by a date field: Giovanni Manghi wrote:
> I am anyway wondering if this is not really a bug, in the sense that in case of real date... Harrissou Santanna
10:34 AM Bug report #17320: Can't filter a table by a date field: Harrissou Santanna wrote:
> Patrick Dunford wrote:
>
> > Can this be added to the official documentation as I di... Giovanni Manghi
10:21 AM Bug report #17320: Can't filter a table by a date field: Patrick Dunford wrote:

> Can this be added to the official documentation as I did search for it but did not find ... Harrissou Santanna
05:01 AM Bug report #17320: Can't filter a table by a date field: That seems to do the trick. However it is an issue on masters I have tested with, do you have any suggestion it is re... Patrick Dunford
10:40 AM Bug report #17127: Control order by which bands are stacked: see also #17327 Giovanni Manghi
10:08 AM Feature request #17326 (Closed): Sorting of Layers: Duplicate of #6828. This has been implemented in https://github.com/qgis/QGIS/pull/4965. Harrissou Santanna
10:08 AM Feature request #17326 (Closed): Sorting of Layers: Duplicate of #6828. This has been implemented in https://github.com/qgis/QGIS/pull/4965. Harrissou Santanna
09:55 AM Feature request #17326 (Closed): Sorting of Layers: If several Raster Layers are added to the Layers Panel they are sorted in descending alphanumeric order according to ... Hans Fuchs

2017-10-24

12:24 AM Bug report #17287: OGR processing of scratch layers doesn't work: A better and more complete fix for master https://github.com/qgis/QGIS/pull/5436 Giovanni Manghi
08:36 PM Feature request #9405 (Closed): differentiate between built-in plugins and user plugins: Fixed in commit:87d087bbfdb0
As the number of core plugins is decreasing and we're going to remove them all some d... Borys Jurgiel
08:36 PM Feature request #9405 (Closed): differentiate between built-in plugins and user plugins: Fixed in commit:87d087bbfdb0
As the number of core plugins is decreasing and we're going to remove them all some d... Borys Jurgiel
08:36 PM Feature request #9405 (Closed): differentiate between built-in plugins and user plugins: Fixed in commit:87d087bbfdb0
As the number of core plugins is decreasing and we're going to remove them all some d... Borys Jurgiel
07:26 PM Bug report #17324 (Feedback): Geometries guided by advanced digitization tools snap inaccurately.: genuinely asking: does it make sense digitizing at 220:1 scale? what is your configured snapping distance?
does i... Giovanni Manghi
06:30 PM Bug report #17324 (Closed): Geometries guided by advanced digitization tools snap inaccurately.: Caveats:
* Though the attachments in this defect are captured from QGIS 2.18.0, it has been confirmed as still being... Kyle Welsh
07:22 PM Bug report #16898 (Closed): Geometry checker crashes when checking a specific vector layer (attac...: Giovanni Manghi
04:59 PM Bug report #16898: Geometry checker crashes when checking a specific vector layer (attached): Sandro Mani wrote:
> The PR is now merged to master.
I did a quick test on the plugin in the master
and it work... Antonio Viscomi
04:14 PM Bug report #16898: Geometry checker crashes when checking a specific vector layer (attached): The PR is much more than a fix, it's a major rework of the plugin, and as such no, it won't be backported. Sandro Mani
04:12 PM Bug report #16898: Geometry checker crashes when checking a specific vector layer (attached): The patch is against master. Will the fix be backported? Harrissou Santanna
07:20 PM Bug report #15626: GDAL-Tools (Raster menu) batch mode in QGIS 2.16 does not work: LEONID SOLNTSEV wrote:
> QGIS 2.18.13; GDAL 2.2.1; Ubuntu 16.04.3
use batch mode in the Processing toolbox, the o... Giovanni Manghi
05:58 PM Bug report #15626: GDAL-Tools (Raster menu) batch mode in QGIS 2.16 does not work: QGIS 2.18.13; GDAL 2.2.1; Ubuntu 16.04.3... LEONID SOLNTSEV
04:16 PM Bug report #17150 (Closed): Processing: output for standard NxT distance matrix now wrong: Applied in changeset commit:qgis|c64f03d0a43822c091e3f60bd4b8b3538d000c1e. Alexander Bruy
04:16 PM Bug report #17150 (Closed): Processing: output for standard NxT distance matrix now wrong: Applied in changeset commit:qgis|c64f03d0a43822c091e3f60bd4b8b3538d000c1e. Alexander Bruy
02:52 PM Bug report #17312 (Open): Attribute Table refresh issue using the Quick Field Calculation Bar: still have to be fixed on master where I want to add unit test Luigi Pirelli
02:37 PM Bug report #17312 (Closed): Attribute Table refresh issue using the Quick Field Calculation Bar: Applied in changeset commit:qgis|d6a39e9018d2e48d32db45f07f9a26e8d1bf9867. Luigi Pirelli
02:37 PM Bug report #17312 (Closed): Attribute Table refresh issue using the Quick Field Calculation Bar: Applied in changeset commit:qgis|d6a39e9018d2e48d32db45f07f9a26e8d1bf9867. Luigi Pirelli
01:09 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: for 2.18 added PR https://github.com/qgis/QGIS/pull/5433
next steps will be PR for 3.0 and add a test to avoid reg... Luigi Pirelli
02:23 PM Bug report #16524: Processing/geoprocessing operations failing in 2.18 with memory layers: I have found that it is caused by 3rd party plugins that create memory layers. Something must have changed recently i... Calvin Hamilton
09:54 AM Bug report #16524 (Feedback): Processing/geoprocessing operations failing in 2.18 with memory layers: I have tested almost all geoprocessing tools and their combinations and also was not able to reproduce this bug. Alexander Bruy
11:41 AM Bug report #17320 (Open): Can't filter a table by a date field: This (example) works
cast(date as character) = '1938/02/04'
taken from
https://gis.stackexchange.com/a/10... Giovanni Manghi
11:41 AM Bug report #17320 (Open): Can't filter a table by a date field: This (example) works
cast(date as character) = '1938/02/04'
taken from
https://gis.stackexchange.com/a/10... Giovanni Manghi
11:41 AM Bug report #17320 (Open): Can't filter a table by a date field: This (example) works
cast(date as character) = '1938/02/04'
taken from
https://gis.stackexchange.com/a/10... Giovanni Manghi
08:44 AM Bug report #17320: Can't filter a table by a date field: https://drive.google.com/open?id=0B3nXs7drynJWeWVmbXFocWEycjQ Patrick Dunford
11:33 AM Bug report #17323: Random extract within subset not working: Also does not work on 2.14 but works on master. Giovanni Manghi

2017-10-23

11:33 PM Bug report #16898: Geometry checker crashes when checking a specific vector layer (attached): The PR is now merged to master. Sandro Mani
11:03 PM Bug report #17319: v.net category value: I was really in doubt when I clicked on "bug report", but for a user who is following manuals, tutorials and examples... Sergio Antonio
09:08 AM Bug report #17319 (Feedback): v.net category value: Is this a question or a bug report?
Is this about the tools in the Processing toolbox or the QGIS/GRASS plugin?
... Giovanni Manghi
09:08 AM Bug report #17319 (Feedback): v.net category value: Is this a question or a bug report?
Is this about the tools in the Processing toolbox or the QGIS/GRASS plugin?
... Giovanni Manghi
04:31 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: a simplified patch:
QgsAttributeTableModel* masterModel = mMainView->masterModel();
masterModel->reload( master... Luigi Pirelli
02:00 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: this tests fails locally also without my patch! on travis the build is successfull :/ Luigi Pirelli
12:53 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: checking if this patch is affecting tests:
116/261 Test #116: qgis_dualviewtest .......................***Exception:... Luigi Pirelli
12:47 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: no, no more reload is necessary. Explicitely reload is present every time endEditCommand is triggered Luigi Pirelli
12:41 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: this is a side effect of avoid reloading of data during editing
https://issues.qgis.org/projects/qgis/repository/rev... Luigi Pirelli
12:41 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: this is a side effect of avoid reloading of data during editing
https://issues.qgis.org/projects/qgis/repository/rev... Luigi Pirelli
12:34 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: Luigi Pirelli wrote:
> hmmm... probably having a different feature show option? I was able to replicate with "Show A... Giovanni Manghi
12:33 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: hmmm... probably having a different feature show option? I was able to replicate with "Show All feature" Luigi Pirelli
12:28 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: Luigi Pirelli wrote:
> replicated on 2.18.13-21 on win and linux
that's weird, work as expected for me on Linux. Giovanni Manghi
12:27 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: replicated on 2.18.13-21 on win and linux Luigi Pirelli
11:27 AM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: trying to replicate Luigi Pirelli
10:22 AM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: It seems to affect Windows, as on Linux with the same patch the table is auto-refreshed. Giovanni Manghi
02:58 PM Bug report #17323 (Closed): Random extract within subset not working: The algorithm in Processing "Random extract within subset" is not working. Seems stopping at the first feature found. matteo ghetta
01:52 PM Feature request #17321: Sorting of layers in Processing "multiple input" widget: Really those vector layers are quite ugly, take a look to this "layouts":https://www.zz.com.ve eduardo rinaris
10:25 AM Feature request #17321 (Closed): Sorting of layers in Processing "multiple input" widget: Using 'Merge vector layers' under 'Vector' > 'Data Management Tools'. When selecting 'Layers to merge' the layers are... Nigel Malcolm
01:08 PM Bug report #17322: qgis._core import error: Really I do not know. This code works on qgis python console. However, it gives the error when I run it on PyCharm. Mustafa Uçar
12:35 PM Bug report #17322: qgis._core import error: Mustafa Uçar wrote:
> I asked it everywhere for 2 weeks there is no progress about fixing the problem.
can you po... Giovanni Manghi
12:32 PM Bug report #17322: qgis._core import error: I asked it everywhere for 2 weeks there is no progress about fixing the problem.
Mustafa Uçar
12:12 PM Bug report #17322 (Closed): qgis._core import error: Please ask questions in the developers/users mailing list, or on IRC or gis.stackexchange. If after that an issue is ... Giovanni Manghi
12:10 PM Bug report #17322 (Closed): qgis._core import error: *Hello I am trying to run a standalone application. However, it does not run the program because of mentioned error i... Mustafa Uçar
12:42 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: René-Luc ReLuc wrote:
> Does the issue still exist in 2.18 ?
> I have tested the dummy project with 2.18.13 and no ... Giovanni Manghi
09:01 AM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: René-Luc ReLuc wrote:
> Does the issue still exist in 2.18 ?
> I have tested the dummy project with 2.18.13 and no ... Giovanni Manghi
12:09 PM Bug report #16135 (Closed): Selection by layerid instead layername from .gdb: fixed here https://github.com/qgis/QGIS/pull/5415 Giovanni Manghi
12:09 PM Bug report #16135 (Closed): Selection by layerid instead layername from .gdb: fixed here https://github.com/qgis/QGIS/pull/5415 Giovanni Manghi
11:25 AM Bug report #15680 (Feedback): Clipping of raster with GDAL may hang QGIS: Should be fixed in master Alexander Bruy
11:25 AM Bug report #15680 (Feedback): Clipping of raster with GDAL may hang QGIS: Should be fixed in master Alexander Bruy
11:19 AM Bug report #16193: The new searchbox in the Layer properties dialog prevents minimization of the ...: This is still an issue on master. While I can minimize left panel manually, its state is not preserved when dialog op... Alexander Bruy
10:55 AM Feature request #16834 (Closed): Extend string search in multi-attribute search with "starts with...: Implemented in commit:8efa9fa815e1437432a44ed00ea51f063da27014 Andreas Neumann
10:55 AM Feature request #16834 (Closed): Extend string search in multi-attribute search with "starts with...: Implemented in commit:8efa9fa815e1437432a44ed00ea51f063da27014 Andreas Neumann
10:55 AM Feature request #16834 (Closed): Extend string search in multi-attribute search with "starts with...: Implemented in commit:8efa9fa815e1437432a44ed00ea51f063da27014 Andreas Neumann
10:53 AM Bug report #16750 (Closed): Attribute table does not show display value in case a relation refere...: Issue doesn't appear anymore in master. Closing therefore. Andreas Neumann
10:53 AM Bug report #16750 (Closed): Attribute table does not show display value in case a relation refere...: Issue doesn't appear anymore in master. Closing therefore. Andreas Neumann
10:50 AM Feature request #16835 (Closed): Side column in form view remembers columns, but no expressions: implemented in commit:f0cf4c3ee8a29847796ed956da3c832372312a2c Andreas Neumann
10:50 AM Feature request #16835 (Closed): Side column in form view remembers columns, but no expressions: implemented in commit:f0cf4c3ee8a29847796ed956da3c832372312a2c Andreas Neumann
10:34 AM Bug report #17318 (Closed): Fields and Values NULLS in Expression Calculator (Tool Set Z value): See #17267-1 for an explanation. Giovanni Manghi
10:34 AM Bug report #17318 (Closed): Fields and Values NULLS in Expression Calculator (Tool Set Z value): See #17267-1 for an explanation. Giovanni Manghi
10:32 AM Bug report #17226 (Closed): Geopackage "Select Vector Layers to Add" dialogue has wrong nr of fea...: Andreas Neumann
10:31 AM Bug report #17226: Geopackage "Select Vector Layers to Add" dialogue has wrong nr of features: Seems to be fixed now. Andreas Neumann
10:08 AM Bug report #17187 (Closed): Attribute Table refresh issue: replaced by #17312 Giovanni Manghi
10:08 AM Bug report #17187 (Closed): Attribute Table refresh issue: replaced by #17312 Giovanni Manghi
09:57 AM Bug report #15546 (Closed): Crash when rendering a polygon layer with style and labels: Giovanni Manghi
09:56 AM Bug report #15546: Crash when rendering a polygon layer with style and labels: Yes close this issue
I believe it is because of the long use of a project file across different versions. Also, ... Stefan Schweigel
09:45 AM Bug report #15546: Crash when rendering a polygon layer with style and labels: Can we close this as "won't fix" as probably caused by an unclean (and hard to replicate) project? Giovanni Manghi
09:12 AM Bug report #15546: Crash when rendering a polygon layer with style and labels: The solution for this issue seems to be:
- change the OTF projection to 4326
- save the project as a different name... Stefan Schweigel
08:54 AM Bug report #17316: Current implementation of multiple-layer style paste doesn't work for the comm...: l Giovanni Manghi
08:53 AM Bug report #17317 (Feedback): mProxyModel is nullptr when QgsBrowserDockWidget::refreshModel call...: Please submit your patch as a pull request on Github. Thanks! Giovanni Manghi
08:53 AM Bug report #17317 (Feedback): mProxyModel is nullptr when QgsBrowserDockWidget::refreshModel call...: Please submit your patch as a pull request on Github. Thanks! Giovanni Manghi
08:53 AM Bug report #17317 (Feedback): mProxyModel is nullptr when QgsBrowserDockWidget::refreshModel call...: Please submit your patch as a pull request on Github. Thanks! Giovanni Manghi
08:53 AM Bug report #17317 (Feedback): mProxyModel is nullptr when QgsBrowserDockWidget::refreshModel call...: Please submit your patch as a pull request on Github. Thanks! Giovanni Manghi
08:52 AM Bug report #17080: Processing: saving to file results of SAGA raster tools do not work if input h...: > The result is the same. I attach the log file. I used a path with your suggestions.
RuntimeError: Could n... Giovanni Manghi
08:47 AM Bug report #17222: OpenFileGDB feature count showing in layer name value: Is this ticket the same as #16135 ? Giovanni Manghi
04:53 AM Bug report #17222 (Closed): OpenFileGDB feature count showing in layer name value: fixed in a recent master - thank you! joe larson
08:46 AM Bug report #17320 (Feedback): Can't filter a table by a date field: Please attach sample data. Giovanni Manghi
08:46 AM Bug report #17320 (Feedback): Can't filter a table by a date field: Please attach sample data. Giovanni Manghi
04:47 AM Bug report #17320 (Closed): Can't filter a table by a date field: I have a shapefile whose data table has a field that contains dates and is shown in the layer properties as being QDa... Patrick Dunford

2017-10-22

05:01 PM Bug report #17080: Processing: saving to file results of SAGA raster tools do not work if input h...: Giovanni Manghi wrote:
> Mario Reyes wrote:
> > Could not load layer: C:/Users/Leslie/Documents/Curso QGIS II/Pract... Mario Reyes
03:49 PM Bug report #17319 (Closed): v.net category value: The dialog boxes of the v.net (GRASS GIS) tools available in QGIS allow the user to select the features to be used by... Sergio Antonio
03:02 PM Bug report #17318 (Closed): Fields and Values NULLS in Expression Calculator (Tool Set Z value): I'm trying to assign the height value from a field in the attribute table, but when trying to use the "Set Z Value"pr... Samuel Fernando Mesa Giraldo
03:00 PM Bug report #17317 (Closed): mProxyModel is nullptr when QgsBrowserDockWidget::refreshModel called...: Add/Edit/Delete WMS or XYZ provider produce this stack trace because mProxyModel is nullptr when QgsBrowserDockWidget... Hanif Rifai
12:12 PM Bug report #17316 (Open): Current implementation of multiple-layer style paste doesn't work for t...: I'm not sure this should be categorized as a bug or just a feature request.
from a closed feature request: #10323
... sand thorn
08:14 AM Bug report #17315 (Feedback): 3D Viewer: QGIS Crash when activating 3D Map view and 3D renderer: QGIS cc96f51e62 Installed with OSGeo4W64
* Load test data (but any other data didn't work for me)
* Start the New... Luca Casagrande

2017-10-21

10:54 PM Bug report #17312: Attribute Table refresh issue using the Quick Field Calculation Bar: I confirm this on
OS: Windows 10 64-bit
QGIS: 2.18.13-20 64-bit (via OSGeo4W pre-compiled) (Thanks to Giovanni Ma... sand thorn
11:38 AM Bug report #17312 (Closed): Attribute Table refresh issue using the Quick Field Calculation Bar: The Attribute Table doesn't immediately update when fields are set with the Quick Field Calculation Bar.
Steps to ... Geo Dev
06:58 PM Bug report #17187: Attribute Table refresh issue: Yes, this bug report should now be closed with a reference to the new one (#17312). Geo Dev
02:31 PM Bug report #17187: Attribute Table refresh issue: I agree - #17289 was a different bug.
The only reason I copied the videos over was because #17289 was incorrectly ... Steve Lowman
11:44 AM Bug report #17187: Attribute Table refresh issue: Tested 2.18-dev (just compiled) also on Linux:: exactly the same issue of Windows (even with regard to focus behaviou... Geo Dev
05:54 PM Bug report #17314: export to dxf format - z dimension: test: export from dgn to dxf (linestring) jose macau
05:46 PM Bug report #17314 (Closed): export to dxf format - z dimension: export to dxf file format doesn't export z dimension jose macau
05:39 PM Feature request #17302 (Closed): Partitioned Table using PostgreSQL 10 native partitioning won't ...: Applied in changeset commit:qgis|f243b8448e16f9516e60d684156ec80534521d5a. Jürgen Fischer
05:39 PM Feature request #17302 (Closed): Partitioned Table using PostgreSQL 10 native partitioning won't ...: Applied in changeset commit:qgis|f243b8448e16f9516e60d684156ec80534521d5a. Jürgen Fischer
02:36 PM Bug report #17262: Attribute table data entered text is obscured by the 'x' button: Okay, those other bugs are not directly related to this one.
However, I think this one should be classed as a Regr... Steve Lowman
02:10 PM Feature request #17313 (Open): Adopt JRectifier or incorporate funtionality into GDAL Georeferencer: Janek's JRectifier plugin is so much better to use than the GDAL Georeferencer, it would be a much better core georef... Steve Lowman
08:13 AM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: René-Luc ReLuc wrote:
> Have you the QGIS and QGIS Server log ?
I have only QGIS Server log, QGIS is installed no... Uroš Preložnik
08:13 AM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: René-Luc ReLuc wrote:
> Have you the QGIS and QGIS Server log ?
I have only QGIS Server log, QGIS is installed no... Uroš Preložnik

2017-10-20

12:50 AM Bug report #17309: SpatiaLite Layer default style is (usually) not loaded.: After more testing: Saving and loading styles in Spatialite db depends on provider type, QGIS version and probably GD... Borys Jurgiel
04:03 PM Bug report #17309 (Closed): SpatiaLite Layer default style is (usually) not loaded.: A default style for a Spatialite layer is not loaded by QGIS.
Neither from the source db nor the local qgis.qmldb.
... Borys Jurgiel
12:41 AM Bug report #17226 (Feedback): Geopackage "Select Vector Layers to Add" dialogue has wrong nr of f...: Can you retry ? I can't reproduce this . I belive this has been fixed and is a duplicate of #17222 Even Rouault
12:40 AM Bug report #17222 (Feedback): OpenFileGDB feature count showing in layer name value: Can you retry with latest master ? I can't reproduce, so it might have been fixed Even Rouault
12:09 AM Bug report #16806 (Closed): Non valid VRT logic due to GDAL changes in QgsGdalDataItems: Applied in changeset commit:qgis|49071808acb104c5c6dc0d63a40296a0f88969da. Even Rouault
12:09 AM Bug report #16806 (Closed): Non valid VRT logic due to GDAL changes in QgsGdalDataItems: Applied in changeset commit:qgis|49071808acb104c5c6dc0d63a40296a0f88969da. Even Rouault
11:17 PM Bug report #17311 (Open): QGIS crashes when trying to save edits on Oracle Spatial layers added u...: Subject says it all. No crash if the same layer is edited with the native Oracle provider.
Also with the OGR drive... Giovanni Manghi
08:12 PM Bug report #17187: Attribute Table refresh issue: Geo Dev wrote:
> Tested on a just compiled code of the last 2.18-dev (with the latest commit 6d50b37) and on the alr... Giovanni Manghi
07:23 PM Bug report #17187: Attribute Table refresh issue: Tested on a just compiled code of the last 2.18-dev (with the latest commit 6d50b37) and on the already compiled OSGe... Geo Dev
06:18 PM Bug report #17187: Attribute Table refresh issue: sand thorn wrote:
> I can not find 2.18-dev in
>
> http://qgis.org/downloads/weekly/?C=M;O=D
>
> There are onl... Giovanni Manghi
05:41 PM Bug report #17187: Attribute Table refresh issue: I can not find 2.18-dev in
http://qgis.org/downloads/weekly/?C=M;O=D
There are only 2.99-dev. Besides, there se... sand thorn
04:58 PM Bug report #17187: Attribute Table refresh issue: or 2.18-dev Luigi Pirelli
04:46 PM Bug report #17187: Attribute Table refresh issue: Geo Dev wrote:
> IMHO the description of this bug (#17187) is properly focused on the issue that still occurs in bot... Giovanni Manghi
04:31 PM Bug report #17187: Attribute Table refresh issue: IMHO the description of this bug (#17187) is properly focused on the issue that still occurs in both versions 2.18.13... Geo Dev
10:10 AM Bug report #17187: Attribute Table refresh issue: yes, IMHO is better to close this issue and reopen one related to master. The main reason is also because, in this mo... Luigi Pirelli
09:44 AM Bug report #17187 (Feedback): Attribute Table refresh issue: Geo Dev wrote:
> The backported fix commit:5f22ba1c936db18f9326b84315be03b4874282e0
> doesn't fix this issue (#1718... Giovanni Manghi
09:44 AM Bug report #17187 (Feedback): Attribute Table refresh issue: Geo Dev wrote:
> The backported fix commit:5f22ba1c936db18f9326b84315be03b4874282e0
> doesn't fix this issue (#1718... Giovanni Manghi
07:57 PM Bug report #17310: Cannot start up docker container qgis/qgis on Mac: Christopher Lynnes wrote:
> Well, the docker hub web page at https://hub.docker.com/r/qgis/qgis/ says it is the "off... Giovanni Manghi
07:29 PM Bug report #17310: Cannot start up docker container qgis/qgis on Mac: Well, the docker hub web page at https://hub.docker.com/r/qgis/qgis/ says it is the "official docker repository for h... Christopher Lynnes
07:10 PM Bug report #17310 (Feedback): Cannot start up docker container qgis/qgis on Mac: Ummm... this is the tracker for the QGIS application, not for anything else (so not for the dicker container... that ... Giovanni Manghi
07:10 PM Bug report #17310 (Feedback): Cannot start up docker container qgis/qgis on Mac: Ummm... this is the tracker for the QGIS application, not for anything else (so not for the dicker container... that ... Giovanni Manghi
07:10 PM Bug report #17310 (Feedback): Cannot start up docker container qgis/qgis on Mac: Ummm... this is the tracker for the QGIS application, not for anything else (so not for the dicker container... that ... Giovanni Manghi
07:05 PM Bug report #17310 (Closed): Cannot start up docker container qgis/qgis on Mac: I'm on a MacBook Air running 10.11.6. I am running Docker 17.09.0-ce. I have been trying to get QGIS installed on m... Christopher Lynnes
07:23 PM Bug report #13957: [Project Properties] certain ellipsoids selected cause transform initializatio...: I have found two more ellipsoids that have a different initialization problem. These have zero for the a, b parameter... Steven Mizuno
07:15 PM Bug report #17296: Strange behaviour of Measurement settings dropdowns inside project CRS properties: see also #13956 and #17208.
This ticket essentially is a duplicate of the problems previously reported. Steven Mizuno
04:43 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: René-Luc ReLuc wrote:
> Giovanni Manghi wrote:
> > René-Luc ReLuc wrote:
> > > The layer order in the URL has chan... Giovanni Manghi
04:36 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: Giovanni Manghi wrote:
> René-Luc ReLuc wrote:
> > The layer order in the URL has changed between 2.14 and 2.18.
>... René-Luc ReLuc
04:34 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: René-Luc ReLuc wrote:
> The layer order in the URL has changed between 2.14 and 2.18.
I tested the Montpellier de... Giovanni Manghi
04:31 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: The layer order in the URL has changed between 2.14 and 2.18.
And with a fake server X, no segfault ? René-Luc ReLuc
04:29 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: René-Luc ReLuc wrote:
> Have you the QGIS and QGIS Server log ?
I did a complete fresh install on Ubuntu xenial, ... Giovanni Manghi
01:32 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: Have you the QGIS and QGIS Server log ? René-Luc ReLuc
01:22 PM Bug report #15440 (Open): QGIS Server: GetPrint crashes on Windows when there are advanced eleme...: Giovanni Manghi
01:20 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: Hi,
I can confirm this bug on QGIS LTR 2.18.13 and Ubuntu server. Print composer without text label (map, legend, ... Uroš Preložnik
04:04 PM Bug report #17256 (Closed): SpatiaLite Layer default style is not loaded when using the SpatiaLit...: Borys Jurgiel
03:45 PM Bug report #15742: Error in Basic statistics for numeric fields: Joao Paulouro wrote:
> I can confirm the bug on a QGIS 2.18.13 installation via homebrew on mac. The issue seems to ... Giovanni Manghi
03:37 PM Bug report #15742: Error in Basic statistics for numeric fields: I can confirm the bug on a QGIS 2.18.13 installation via homebrew on mac. The issue seems to only affect values with ... Joao Paulouro
01:28 PM Bug report #17295: vector styler in layer properties shows "This renderer doesn't implement a gra...: landry Landry Breuil wrote:
> There was already a thread on the -dev ML (to which i'm not subscribed) so as i experi... Giovanni Manghi
11:32 AM Bug report #17295: vector styler in layer properties shows "This renderer doesn't implement a gra...: There was already a thread on the -dev ML (to which i'm not subscribed) so as i experienced the same issue, i figured... landry Landry Breuil
01:05 PM Bug report #17308: Plugins menu shows incorrect correct: See:
https://github.com/qgis/QGIS/pull/5412
and for discussion:
https://github.com/qgis/qgis3_UIX_discuss... Richard Duivenvoorde
11:29 AM Bug report #17308 (Closed): Plugins menu shows incorrect correct: The options "Install from Zip" and "Settings" don't show the correct content.
QGIS 2.99 installed with OSGEO4W.
... Michel Stuyts
10:47 AM Bug report #17305 (Closed): Labeling using setCustomProperty(): Closed in favor of #17307 Giovanni Manghi
10:47 AM Bug report #17305 (Closed): Labeling using setCustomProperty(): Closed in favor of #17307 Giovanni Manghi
10:23 AM Bug report #17305: Labeling using setCustomProperty(): I wanted to change the title of this issue to:
Problem with conversion of strings, e.g. when labeling using setCusto... Markus Woehling
09:46 AM Bug report #17305 (Feedback): Labeling using setCustomProperty(): Markus Woehling wrote:
> EasyCustomLabeling is working on 2.18.13, right.
> I found out that setCustomProperty() is... Giovanni Manghi
10:39 AM Bug report #16898: Geometry checker crashes when checking a specific vector layer (attached): Giovanni Manghi wrote:
> Antonio Viscomi wrote:
> > Giovanni Manghi wrote:
> > > Please test again after the patch... Antonio Viscomi
10:26 AM Bug report #16898: Geometry checker crashes when checking a specific vector layer (attached): Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > Please test again after the patch has been merged in master.
>... Giovanni Manghi
10:25 AM Bug report #16898: Geometry checker crashes when checking a specific vector layer (attached): Giovanni Manghi wrote:
> Please test again after the patch has been merged in master.
Hi everybody,
when this pa... Antonio Viscomi
09:45 AM Bug report #16898 (Feedback): Geometry checker crashes when checking a specific vector layer (att...: Please test again after the patch has been merged in master. Giovanni Manghi
10:32 AM Bug report #17307 (Closed): Problem with conversion of python strings, e.g. when labeling using s...: For me it's not possible anymore to configure labeling (for QgsVectorLayer) using setCustomProperty().
I found out... Markus Woehling
10:24 AM Feature request #17273 (Feedback): Respect coordinate system (CRS) when outputFormat=GeoJSON: René-Luc ReLuc wrote:
> To support different's CRSs in WFS, QGIS Server needs to implement WFS 1.1.0.
>
> It's no... Giovanni Manghi
10:14 AM Feature request #17273: Respect coordinate system (CRS) when outputFormat=GeoJSON: To support different's CRSs in WFS, QGIS Server needs to implement WFS 1.1.0.
It's not a regression because, QGIS ... René-Luc ReLuc
10:23 AM Bug report #15086 (Closed): Inconsistency between layernames in WMS and WFS: René-Luc ReLuc wrote:
> Used the shortname to avoid this difference.
so this can be closed? Giovanni Manghi
10:21 AM Bug report #15086: Inconsistency between layernames in WMS and WFS: Used the shortname to avoid this difference. René-Luc ReLuc
10:20 AM Bug report #15086: Inconsistency between layernames in WMS and WFS: The layer name in WFS has to be compatible with an XML element tag name. It is not only used in URL has apram, it is ... René-Luc ReLuc
10:22 AM Bug report #15085 (Feedback): The setting 'Use layer ids as name' does not work for WFS-call: has it been fixed in 2.18 ? René-Luc ReLuc
10:18 AM Bug report #15979 (Feedback): %20 in QGIs project file: Has it been fixed in 2.18 ? René-Luc ReLuc
10:18 AM Bug report #15979 (Feedback): %20 in QGIs project file: Has it been fixed in 2.18 ? René-Luc ReLuc
10:15 AM Bug report #16995: Cannot add WFS layer from QGIS Server to GeoServer: Can you provide a more explicit error ? René-Luc ReLuc
08:24 AM Bug report #17279: Working with QgisBrowser widget makes my QGIS crash more often: Another crash example. With me easily reproducable by
- create empty project
- load default (osm) xyz layer via '... Richard Duivenvoorde

2017-10-19

11:26 PM Bug report #17305: Labeling using setCustomProperty(): EasyCustomLabeling is working on 2.18.13, right.
I found out that setCustomProperty() is working fine in the python ... Markus Woehling
05:48 PM Bug report #17305: Labeling using setCustomProperty(): Can you test EasyCustomLabeling plugin?
It uses setCustomProperty() a lot and in my experience, it works on 2.18.1... Regis Haubourg
11:18 AM Bug report #17305 (Open): Labeling using setCustomProperty(): Giovanni Manghi
11:13 AM Bug report #17305: Labeling using setCustomProperty(): Yes, it did work up to version 2.14 (but I did not check 2.16).
Markus Woehling
11:03 AM Bug report #17305 (Feedback): Labeling using setCustomProperty(): did it worked in previous qgis releases? Giovanni Manghi
10:33 PM Bug report #16898: Geometry checker crashes when checking a specific vector layer (attached): I've finally got to submitting the PR for the new enhanced geometry checker (https://github.com/qgis/QGIS/pull/5410) ... Sandro Mani
08:13 PM Bug report #17187 (Reopened): Attribute Table refresh issue: The backported fix commit:5f22ba1c936db18f9326b84315be03b4874282e0
doesn't fix this issue (#17187) that still occurs... Geo Dev
06:43 PM Bug report #17187 (Closed): Attribute Table refresh issue: Applied in changeset commit:qgis|6d50b37c628e858760a9bdea3fa3860826281134. Paul Blottiere
06:43 PM Bug report #17187 (Closed): Attribute Table refresh issue: Applied in changeset commit:qgis|6d50b37c628e858760a9bdea3fa3860826281134. Paul Blottiere
05:51 PM Bug report #17187: Attribute Table refresh issue: confirmed that https://github.com/qgis/QGIS/pull/5403 fix this issue
Luigi Pirelli
04:22 PM Bug report #17187: Attribute Table refresh issue: check if https://github.com/qgis/QGIS/pull/5403 really fix the issue
Luigi Pirelli
12:27 PM Bug report #17187: Attribute Table refresh issue: https://github.com/qgis/QGIS/pull/5403 Luigi Pirelli
12:27 PM Bug report #17187: Attribute Table refresh issue: https://github.com/qgis/QGIS/pull/5403 Luigi Pirelli
12:09 PM Bug report #17187: Attribute Table refresh issue: Luigi Pirelli wrote:
> the same issue was already fixed 4month ago in master commit:5f22ba1c936db18f9326b84315be03b4... Giovanni Manghi
12:01 PM Bug report #17187: Attribute Table refresh issue: the same issue was already fixed 4month ago in master commit:5f22ba1c936db18f9326b84315be03b4874282e0 but never backp... Luigi Pirelli
06:43 PM Bug report #17280 (Closed): When switch between filtered modes, the edited cells stop updating th...: Applied in changeset commit:qgis|6d50b37c628e858760a9bdea3fa3860826281134. Paul Blottiere
06:43 PM Bug report #17280 (Closed): When switch between filtered modes, the edited cells stop updating th...: Applied in changeset commit:qgis|6d50b37c628e858760a9bdea3fa3860826281134. Paul Blottiere
04:12 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: Dope. Thank you. sand thorn
12:28 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: https://github.com/qgis/QGIS/pull/5403 Luigi Pirelli
12:28 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: https://github.com/qgis/QGIS/pull/5403 Luigi Pirelli
12:28 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: https://github.com/qgis/QGIS/pull/5403 Luigi Pirelli
06:00 PM Bug report #15546: Crash when rendering a polygon layer with style and labels: Stefan Schweigel wrote:
> It seems to be a very strange problem. I tried your suggestions: removed the .qgis2 folder... Giovanni Manghi
06:00 PM Bug report #15546: Crash when rendering a polygon layer with style and labels: Stefan Schweigel wrote:
> It seems to be a very strange problem. I tried your suggestions: removed the .qgis2 folder... Giovanni Manghi
04:02 PM Bug report #15546: Crash when rendering a polygon layer with style and labels: It seems to be a very strange problem. I tried your suggestions: removed the .qgis2 folder and disabled all plugins. ... Stefan Schweigel
04:02 PM Bug report #15546: Crash when rendering a polygon layer with style and labels: It seems to be a very strange problem. I tried your suggestions: removed the .qgis2 folder and disabled all plugins. ... Stefan Schweigel
11:45 AM Bug report #15546 (Feedback): Crash when rendering a polygon layer with style and labels: Stefan Schweigel wrote:
> The Problem is still the same in QGIS 2.18.13
>
> Steps to reproduce the crash:
> - op... Giovanni Manghi
11:45 AM Bug report #15546 (Feedback): Crash when rendering a polygon layer with style and labels: Stefan Schweigel wrote:
> The Problem is still the same in QGIS 2.18.13
>
> Steps to reproduce the crash:
> - op... Giovanni Manghi
11:45 AM Bug report #15546 (Feedback): Crash when rendering a polygon layer with style and labels: Stefan Schweigel wrote:
> The Problem is still the same in QGIS 2.18.13
>
> Steps to reproduce the crash:
> - op... Giovanni Manghi
07:28 AM Bug report #15546 (Reopened): Crash when rendering a polygon layer with style and labels: The Problem is still the same in QGIS 2.18.13
Steps to reproduce the crash:
- open the attached sample project
... Stefan Schweigel
04:06 PM Bug report #13957: [Project Properties] certain ellipsoids selected cause transform initializatio...: I confirm the problem also on Ubuntu 16.04 Giovanni Allegri
11:54 AM Bug report #17306 (Closed): using CTRL-A in filtered attribute table selects all the features: and not only the filtered one as expected. Denis Rouzaud
10:49 AM Bug report #17296: Strange behaviour of Measurement settings dropdowns inside project CRS properties: Good catch Steven! The problem was selecting "WGS84" instead of "WGS 84". The latter works fine and selection is reta... Giovanni Allegri
10:05 AM Bug report #16524: Processing/geoprocessing operations failing in 2.18 with memory layers: Cannot reproduce here
I tried you suggestion of creating two polygons in two memory layers, and difference work fi... Victor Olaya

2017-10-18

10:31 PM Bug report #16988 (Closed): Updated canvas setting for min/max values of raster layer with pseudo...: Applied in changeset commit:qgis|a4067399750cc4a0a638f5b3479060a9a42a81e2. Nyall Dawson
10:31 PM Bug report #16988 (Closed): Updated canvas setting for min/max values of raster layer with pseudo...: Applied in changeset commit:qgis|a4067399750cc4a0a638f5b3479060a9a42a81e2. Nyall Dawson
10:02 PM Bug report #13957 (Reopened): [Project Properties] certain ellipsoids selected cause transform in...: I am reopening this because certain ellipsoids are still not initializing properly. Specifically, the ellipsoid WGS84... Steven Mizuno
10:02 PM Bug report #13957 (Reopened): [Project Properties] certain ellipsoids selected cause transform in...: I am reopening this because certain ellipsoids are still not initializing properly. Specifically, the ellipsoid WGS84... Steven Mizuno
09:35 PM Bug report #17296: Strange behaviour of Measurement settings dropdowns inside project CRS properties: Giovanni, I watched your video and tried to duplicate what you did, but was working for me. On closer observation of ... Steven Mizuno
12:44 PM Bug report #17296: Strange behaviour of Measurement settings dropdowns inside project CRS properties: Here it is a video of what happens to me: https://youtu.be/cGDdvgNH1Co
# Switch tabs to make dropbox selecteable
... Giovanni Allegri
11:41 AM Bug report #17296: Strange behaviour of Measurement settings dropdowns inside project CRS properties: I'm not sure what's the expected behaviour of the dropdown. If I have a CRS set for my project I guess the correspond... Giovanni Allegri
09:08 PM Bug report #17305 (Closed): Labeling using setCustomProperty(): It's not possible anymore to configure labeling (for QgsVectorLayer) using setCustomProperty().
It will be a breakin... Markus Woehling
06:53 PM Bug report #13398: Georeferencer produce images in wrong crs in 2.10 and master: I am not experienced enough, to determine wether it is the same source.
In #17138 you have a shape dataset with pr... Gerhard Spieles
05:48 PM Bug report #17080 (Feedback): Processing: saving to file results of SAGA raster tools do not work...: Mario Reyes wrote:
> Could not load layer: C:/Users/Leslie/Documents/Curso QGIS II/Practica 2 Analisis de datos rast... Giovanni Manghi
03:51 PM Bug report #16277 (Closed): Processing "Gdal Clip Vector Layer By Extent" and "Clip Vector by Pol...: They seems to work ok on master/qgis3, please reopen if necessary. Giovanni Manghi
03:51 PM Bug report #16277 (Closed): Processing "Gdal Clip Vector Layer By Extent" and "Clip Vector by Pol...: They seems to work ok on master/qgis3, please reopen if necessary. Giovanni Manghi
03:33 PM Bug report #17187: Attribute Table refresh issue: seems a side effect of my fix to avoid sorting during editing.
commit:6c84b6ea45e02ba71506fdbc6f5a24800c56b1dc
... Luigi Pirelli
03:32 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: seems a side effect of my fix to avoid sorting during editing... now checking how to update data without sorting in t... Luigi Pirelli
03:17 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: checking if this is a regression introduce by me to fix another regression
commit:6c84b6ea45e02ba71506fdbc6f5a248... Luigi Pirelli
02:05 PM Bug report #17280 (Feedback): When switch between filtered modes, the edited cells stop updating ...: I confirm the issue surfaced after 2.18.9 but in the test I made here there is no need to apply filters to have it sh... Giovanni Manghi
02:05 PM Bug report #17280 (Feedback): When switch between filtered modes, the edited cells stop updating ...: I confirm the issue surfaced after 2.18.9 but in the test I made here there is no need to apply filters to have it sh... Giovanni Manghi
12:30 PM Bug report #17280 (Open): When switch between filtered modes, the edited cells stop updating them...: Giovanni Manghi
12:21 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: > > #17262 is also closely related.
>
> seems a completely different thing, imho.
Just both concern data entry ... Steve Lowman
02:30 PM Bug report #17304 (Closed): User profiles/Open active profile folder broken on ...: Ok, after a restart all is working again :-(
Apparently a hickup of the Qt/Desktop glue after an apt update.
So... Richard Duivenvoorde
02:30 PM Bug report #17304 (Closed): User profiles/Open active profile folder broken on ...: Ok, after a restart all is working again :-(
Apparently a hickup of the Qt/Desktop glue after an apt update.
So... Richard Duivenvoorde
01:39 PM Bug report #17304: User profiles/Open active profile folder broken on ...: According to the docs you should use:... Bas Couwenberg
01:07 PM Bug report #17304: User profiles/Open active profile folder broken on ...: Nope, same message...
Same msg when I do it in the Python console:... Richard Duivenvoorde
12:27 PM Bug report #17304: User profiles/Open active profile folder broken on ...: It must be an upstream/distro issue -we just call a standard qt method for opening folders. Does the open project fol... Nyall Dawson
11:50 AM Bug report #17304 (Closed): User profiles/Open active profile folder broken on ...: See subject, while it has been working with me, now I do not get the 'File Explorer' opened anymore here on Debian Te... Richard Duivenvoorde
01:11 PM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Borys Jurgiel wrote:
> Giovanni Manghi wrote:
> > I can't confirm this (the freeze), recently did a training, all W... Giovanni Manghi
01:08 PM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Giovanni Manghi wrote:
> I can't confirm this (the freeze), recently did a training, all Windows machines.
Giovan... Borys Jurgiel
01:02 PM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Steve Lowman wrote:
> I suggest 'Crashes QGIS' should be set to 'Yes', because it was freezing the application when ... Borys Jurgiel
10:52 AM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Steve Lowman wrote:
> I suggest 'Crashes QGIS' should be set to 'Yes', because it was freezing the application when ... Giovanni Manghi
10:46 AM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: I suggest 'Crashes QGIS' should be set to 'Yes', because it was freezing the application when I tried to change any o... Steve Lowman
10:16 AM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Right. Borys Jurgiel
10:16 AM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Right. Borys Jurgiel
10:16 AM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Right. Borys Jurgiel
10:16 AM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Right. Borys Jurgiel
10:16 AM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Right. Borys Jurgiel
12:33 PM Bug report #17293 (Closed): Processing output name called after the operation name even when save...: Giovanni Manghi
11:06 AM Bug report #17293: Processing output name called after the operation name even when saved to file: I agree, thank you. Steve Lowman
10:44 AM Bug report #17293 (Feedback): Processing output name called after the operation name even when sa...: > It effectively means that the default behaviour for the tool in the Vector menu is now different regarding the la... Giovanni Manghi
10:40 AM Bug report #17293 (Open): Processing output name called after the operation name even when saved ...: Thanks, I wasn't sure how ftools related to the OGR version, but what you say makes sense.
It effectively means th... Steve Lowman
11:09 AM Feature request #17303 (Open): Change default setting to 'Checked' for Processing Options "Use fi...: The 2.14 ftools in the Vector menu always set the layer name to be the same as the file name, which seems more sensib... Steve Lowman
10:47 AM Bug report #17295: vector styler in layer properties shows "This renderer doesn't implement a gra...: landry - wrote:
> Also, this happens with an empty profile too, so that rules out the config.
it does not happen ... Giovanni Manghi
10:14 AM Bug report #17295: vector styler in layer properties shows "This renderer doesn't implement a gra...: Also, this happens with an empty profile too, so that rules out the config. landry Landry Breuil
10:09 AM Bug report #17295: vector styler in layer properties shows "This renderer doesn't implement a gra...: Well, that's a regression as it wasnt an issue in previous 2.18.x releases and suddenly happened in .10 or .11 or .12... landry Landry Breuil
10:43 AM Feature request #17302 (Closed): Partitioned Table using PostgreSQL 10 native partitioning won't ...: Given a partitioned table using the newly implemented native partitioning in PostgreSQL 10 the parent table will not ... Andreas Wicht
07:37 AM Bug report #16165: QGIS 2.18.3 crashes on exit: I used to have same problem until deinstallation of "Semi-automation classaification" plugin. It crashed QGIS on clos... ololomp iiiii
02:56 AM Bug report #17206 (Closed): Unable to add GeoJSON URI via Source type: Protocol: Applied in changeset commit:qgis|df0d717f928e0d8b7ceb7edfb69bee09266e29c7. Nyall Dawson
02:56 AM Bug report #17206 (Closed): Unable to add GeoJSON URI via Source type: Protocol: Applied in changeset commit:qgis|df0d717f928e0d8b7ceb7edfb69bee09266e29c7. Nyall Dawson
02:08 AM Bug report #17301 (Closed): 3d view doesn't work with global basemaps: Steps to reproduce:
1. load a dem layer
2. load a wms/xyz/some other form of worldwide "basemap"
3. try to activ... Nyall Dawson

2017-10-17

11:31 PM Bug report #17300 (Closed): Aggregate functions in Field Calculator in modeller: The aggregate functions in field calculator cannot calculate on a layer which is not saved to the project model.
... Danielle G
10:06 PM Bug report #17296: Strange behaviour of Measurement settings dropdowns inside project CRS properties: This is what I am seeing: in Project properties, on the General tab the Measurements group controls as well as 'Displ... Steven Mizuno
09:19 PM Bug report #17296: Strange behaviour of Measurement settings dropdowns inside project CRS properties: Giovanni, can you provide some test data + correct known outcomes please?
That makes it easier to confirm this iss... Richard Duivenvoorde
12:41 PM Bug report #17296: Strange behaviour of Measurement settings dropdowns inside project CRS properties: I'm facing a different strange behoviour now.
# I switch between tabs to enable the dropdown.
# I select WGS84
... Giovanni Allegri
12:30 PM Bug report #17296 (Closed): Strange behaviour of Measurement settings dropdowns inside project CR...: When the project settings dialog is opened the Measurements settings dropdowns inside project CRS properties result d... Giovanni Allegri
09:22 PM Feature request #11732 (Closed): Update MetaSearch plugin icon: Applied in changeset commit:qgis|92e5de9e9ef943a0172c9d55c274dfb5d2394e25. Tom Kralidis
09:22 PM Feature request #11732 (Closed): Update MetaSearch plugin icon: Applied in changeset commit:qgis|92e5de9e9ef943a0172c9d55c274dfb5d2394e25. Tom Kralidis
07:00 PM Feature request #11732: Update MetaSearch plugin icon: Great, works for me. Anita Graser
02:02 PM Feature request #11732: Update MetaSearch plugin icon: Thanks Anita. Latest icon at https://issues.qgis.org/attachments/download/11565/MetaSearch.svg for review and comment. Tom Kralidis
07:26 PM Bug report #17287: OGR processing of scratch layers doesn't work: I have a fix in the works for master/qgis3 (for the buffer tool at least), for qgis2 I really think that the issue is... Giovanni Manghi
07:23 PM Bug report #17293 (Feedback): Processing output name called after the operation name even when sa...: > In 2.14, if you use the 'Vector > Geoprocessing tools > Buffers' tool, it will give your output layer the same na... Giovanni Manghi
05:06 PM Bug report #17293 (Open): Processing output name called after the operation name even when saved ...: Setting back to 'Open' after responding to feedback. Steve Lowman
05:05 PM Bug report #17293: Processing output name called after the operation name even when saved to file: Thanks Giovanni. In fact, there is a difference between 2.14 and 2.18.
In 2.14, if you use the 'Vector > Geoproces... Steve Lowman
11:47 AM Bug report #17293 (Feedback): Processing output name called after the operation name even when sa...: When you select "save to file" I see no difference between 2.14 and 2.18, they behave exactly the same and it all dep... Giovanni Manghi
11:47 AM Bug report #17293 (Feedback): Processing output name called after the operation name even when sa...: When you select "save to file" I see no difference between 2.14 and 2.18, they behave exactly the same and it all dep... Giovanni Manghi
11:47 AM Bug report #17293 (Feedback): Processing output name called after the operation name even when sa...: When you select "save to file" I see no difference between 2.14 and 2.18, they behave exactly the same and it all dep... Giovanni Manghi
11:47 AM Bug report #17293 (Feedback): Processing output name called after the operation name even when sa...: When you select "save to file" I see no difference between 2.14 and 2.18, they behave exactly the same and it all dep... Giovanni Manghi
07:10 PM Bug report #17299 (Open): Histogram for graduated style in layer properties disappears when the l...: See the attached illustration.
The histogram is very difficult to find when the vertical size of the layer propertie... Håvard Tveite
04:59 PM Bug report #15749: Processing: gdal merge converts no data in 0: Giovanni Manghi wrote:
> 2.18 fixed here
>
> https://github.com/qgis/QGIS/pull/4918
>
> needs forwardport to m... Giovanni Manghi
04:58 PM Bug report #17298 (Closed): Processing: gdal merge python error on QGIS 3: ... Giovanni Manghi
04:42 PM Bug report #17132: Errors when running QGIS algorithms with inputs with geometry errors: This dataset
https://issues.qgis.org/attachments/download/11567/TestForBugs.zip
causes the buffer tool in QGIS ... Giovanni Manghi
04:41 PM Bug report #17291 (Closed): QGIS fixed-distance buffer skips features with invalid geometry: Steve Lowman wrote:
> Sample file and comment submitted in response to feedback, so now setting it back to 'Open'.
... Giovanni Manghi
04:41 PM Bug report #17291 (Closed): QGIS fixed-distance buffer skips features with invalid geometry: Steve Lowman wrote:
> Sample file and comment submitted in response to feedback, so now setting it back to 'Open'.
... Giovanni Manghi
04:26 PM Bug report #17291 (Open): QGIS fixed-distance buffer skips features with invalid geometry: Sample file and comment submitted in response to feedback, so now setting it back to 'Open'. Steve Lowman
04:14 PM Bug report #17291: QGIS fixed-distance buffer skips features with invalid geometry: Thanks Giovanni. I see this is related to #17132, which has a high priority. Sorry, I am just an LTR user and probabl... Steve Lowman
11:52 AM Bug report #17291: QGIS fixed-distance buffer skips features with invalid geometry: If you can please also attach your sample data. Giovanni Manghi
11:51 AM Bug report #17291 (Feedback): QGIS fixed-distance buffer skips features with invalid geometry: Steve Lowman wrote:
> Adding second video demo showing OGR buffer tool does not skip features with invalid geometrie... Giovanni Manghi
11:51 AM Bug report #17291 (Feedback): QGIS fixed-distance buffer skips features with invalid geometry: Steve Lowman wrote:
> Adding second video demo showing OGR buffer tool does not skip features with invalid geometrie... Giovanni Manghi
11:48 AM Bug report #17291: QGIS fixed-distance buffer skips features with invalid geometry: Steve Lowman wrote:
> Cross ref to 17293. Both are about buffers, including both QGIS and OGR tools.
>
> Also to ... Giovanni Manghi
04:05 PM Bug report #17297 (Closed): Overwriting environment variables with custom variables in Options ->...: When one overwrites an environment variable that is defined on the system level with a custom variable defined by the... Andreas Neumann
03:59 PM Bug report #16604 (Closed): Natural Neighbour execute error: Fixed here https://github.com/qgis/QGIS/pull/5267/files Giovanni Manghi
03:59 PM Bug report #16604 (Closed): Natural Neighbour execute error: Fixed here https://github.com/qgis/QGIS/pull/5267/files Giovanni Manghi
03:50 PM Feature request #12292: Complete API Documentation: Now that there's an (ongoing) automated process to document the API, is this still valid? Harrissou Santanna
02:35 PM Bug report #16429: [Settings] [Windows] Only validate MSYS and R paths if the relevant provider i...: Issue confirmed in 2.18.13.
Should this be a bug report? It certainly feels like one. Steve Lowman
12:37 PM Bug report #17120: Missing namespace declaration when searching by bounding box: Thanks for the report. I am unable to reproduce (worksforme). I don't have a copy of QGIS 2.8.6 handy to further te... Tom Kralidis
12:36 PM Bug report #16858 (Reopened): Python error:RuntimeError: wrapped C/C++ object of type SnapGeometr...: The problem occurs again for me in the modeler.
Steps to reproduce:
* Run a model
* Close the dialog with the cl... Etienne Trimaille
12:36 PM Bug report #16858 (Reopened): Python error:RuntimeError: wrapped C/C++ object of type SnapGeometr...: The problem occurs again for me in the modeler.
Steps to reproduce:
* Run a model
* Close the dialog with the cl... Etienne Trimaille
12:20 PM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: Giovanni Manghi wrote:
> Loïc BARTOLETTI wrote:
> >
> > I'm close enough to giovanni's opinion to modify the docu... Harrissou Santanna
11:30 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: Loïc BARTOLETTI wrote:
> Yes, and it's normal.
>
> As I have write before: ??either this is normal since the inte... Giovanni Manghi
11:27 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: Yes, and it's normal.
As I have write before: ??either this is normal since the intersection is not done on the fl... Loïc BARTOLETTI
11:10 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: Loïc BARTOLETTI wrote:
> Hello,
>
> Here my example with a dirty map.
>
> Regards.
without OTF there is no ... Giovanni Manghi
10:11 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: Hello,
Here my example with a dirty map.
Regards. Loïc BARTOLETTI
10:11 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: Hello,
Here my example with a dirty map.
Regards. Loïc BARTOLETTI
10:11 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: Hello,
Here my example with a dirty map.
Regards. Loïc BARTOLETTI
09:55 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: Harrissou Santanna wrote:
> I do not think this is a documentation issue: if in the map canvas, the features are sho... Giovanni Manghi
12:03 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: > #17262 is also closely related.
seems a completely different thing, imho.
Giovanni Manghi
12:01 PM Bug report #15440 (Feedback): QGIS Server: GetPrint crashes on Windows when there are advanced e...: Giovanni Manghi
12:00 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....: Does the issue still exist in 2.18 ?
I have tested the dummy project with 2.18.13 and no segfault. René-Luc ReLuc
11:06 AM Bug report #17290 (Closed): field calculator: extract Z coord does not work: Giovanni Manghi
10:05 AM Bug report #17290: field calculator: extract Z coord does not work: Giovanni Manghi wrote:
> salvatore fiandaca wrote:
> > Nyall Dawson wrote:
> > > What z value would you expect it ... salvatore fiandaca
09:58 AM Bug report #17290: field calculator: extract Z coord does not work: salvatore fiandaca wrote:
> Nyall Dawson wrote:
> > What z value would you expect it to give for a linestring? I'd ... Giovanni Manghi
09:46 AM Bug report #17290: field calculator: extract Z coord does not work: Nyall Dawson wrote:
> What z value would you expect it to give for a linestring? I'd say current behavior is correct... salvatore fiandaca
09:04 AM Bug report #17290 (Feedback): field calculator: extract Z coord does not work: Giovanni Manghi
11:04 AM Bug report #17295 (Feedback): vector styler in layer properties shows "This renderer doesn't impl...: Not a general issue, of course, in your case as also in the thread you link it seems that it something related to how... Giovanni Manghi
11:04 AM Bug report #17295 (Feedback): vector styler in layer properties shows "This renderer doesn't impl...: Not a general issue, of course, in your case as also in the thread you link it seems that it something related to how... Giovanni Manghi
11:04 AM Bug report #17295 (Feedback): vector styler in layer properties shows "This renderer doesn't impl...: Not a general issue, of course, in your case as also in the thread you link it seems that it something related to how... Giovanni Manghi
10:52 AM Bug report #17295 (Closed): vector styler in layer properties shows "This renderer doesn't implem...: Not 100% sure if it's a regression since 2.18.10/11/12 but in the last months i havent been able to style vector laye... landry Landry Breuil
11:01 AM Bug report #17187: Attribute Table refresh issue: Added video demonstrating data entry in layer with two features, showing data displaying two cells behind data entry ... Steve Lowman
10:59 AM Bug report #17187: Attribute Table refresh issue: Added video demonstrating data entry in layer with one feature, showing data fails to display until Save is clicked. Steve Lowman
09:10 AM Bug report #17187: Attribute Table refresh issue: See also #17289 Giovanni Manghi
09:10 AM Bug report #17289 (Closed): Issue editing layers: Duplicate of #17187 Giovanni Manghi
09:10 AM Bug report #17289 (Closed): Issue editing layers: Duplicate of #17187 Giovanni Manghi
08:52 AM Feature request #17294 (Open): Defaulting select the "NULL" text when single-click edit only on a...: In the attribute table, when we "single-click" to edit a "NULL" cell, the "NULL" text is not in "selected" stage, ( w... sand thorn
05:04 AM Bug report #15686: Save as Image from WMS/WMTS has reprojection issues: The issue is mainly due to "core\raster\qgsrasterprojector.cpp" performing fast/approximate raster reprojection meant... whatnick -

2017-10-16

01:06 AM Bug report #17290: field calculator: extract Z coord does not work: What z value would you expect it to give for a linestring? I'd say current behavior is correct, OR returning an array... Nyall Dawson
10:01 PM Bug report #17290: field calculator: extract Z coord does not work: from other tests, it is known that to extract the coordZ just do z (point_n ($ geometry, 1))
the question remains wh... salvatore fiandaca
09:46 PM Bug report #17290: field calculator: extract Z coord does not work: salvatore fiandaca wrote:
> field calculator: extract Z coord does not work
>
> given a 3D shapefile, the field c... salvatore fiandaca
07:55 PM Bug report #17290 (Closed): field calculator: extract Z coord does not work: field calculator: extract Z coord does not work
given a 3D shapefile, the field calculator does not extract the Z ... salvatore fiandaca
09:52 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: Cross ref #17289 and #17187
They are all basically duplicates of one another.
I have attached video demos to #1... Steve Lowman
06:48 PM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: 1. Open the attribute table.
2. Switch filter on bottom-left to "Selected features".
3. Start edit mode then try ed... sand thorn
12:37 PM Bug report #17280 (Feedback): When switch between filtered modes, the edited cells stop updating ...: Can you please add detailed steps on how replicate? Thanks! If confirmed this is a regression. Giovanni Manghi
12:37 PM Bug report #17280 (Feedback): When switch between filtered modes, the edited cells stop updating ...: Can you please add detailed steps on how replicate? Thanks! If confirmed this is a regression. Giovanni Manghi
12:37 PM Bug report #17280 (Feedback): When switch between filtered modes, the edited cells stop updating ...: Can you please add detailed steps on how replicate? Thanks! If confirmed this is a regression. Giovanni Manghi
09:46 PM Bug report #17289: Issue editing layers: I suggest the category should be 'Attribute Table', not 'Editing'. Steve Lowman
08:33 PM Bug report #17289: Issue editing layers: #17262.
Both bugs are concerning data entry in attribute table 'table view'.
It may be efficient to fix both errors... Steve Lowman
08:26 PM Bug report #17289: Issue editing layers: Attached mp4 shows data being entered for a second feature.
This time, the data disappears on the first 'tab' but ... Steve Lowman
08:23 PM Bug report #17289: Issue editing layers: Please see attached mp4 video demonstrating some of the problem, with only one feature in the layer.
I will upload a... Steve Lowman
12:30 PM Bug report #17289 (Feedback): Issue editing layers: Please use a descriptive title when filing issues, thanks!
Can you please add detailed steps (and data if necessar... Giovanni Manghi
12:30 PM Bug report #17289 (Feedback): Issue editing layers: Please use a descriptive title when filing issues, thanks!
Can you please add detailed steps (and data if necessar... Giovanni Manghi
12:30 PM Bug report #17289 (Feedback): Issue editing layers: Please use a descriptive title when filing issues, thanks!
Can you please add detailed steps (and data if necessar... Giovanni Manghi
12:26 PM Bug report #17289 (Closed): Issue editing layers: I am having problems editing attribute data in 2.18.13 – when the layer is in edit mode - the edits typed into the at... Arthur Taute
09:43 PM Bug report #17291: QGIS fixed-distance buffer skips features with invalid geometry: Cross ref to 17293. Both are about buffers, including both QGIS and OGR tools.
Also to comment, I think this may c... Steve Lowman
09:31 PM Bug report #17291: QGIS fixed-distance buffer skips features with invalid geometry: Adding second video demo showing OGR buffer tool does not skip features with invalid geometries Steve Lowman
09:29 PM Bug report #17291 (Closed): QGIS fixed-distance buffer skips features with invalid geometry: The OGR 'Buffer vectors' algorithm will buffer polygon features with most (possibly all?) kinds of geometric errors, ... Steve Lowman
09:40 PM Bug report #17293 (Closed): Processing output name called after the operation name even when save...: I have categorised this with 'Processing QGIS', because you cannot give it more than one category, but it also applie... Steve Lowman
09:32 PM Bug report #17292 (Closed): Data Source Manager: WFS loads layer two time if you use the Add butt...: When in the Datasource manager you create a new WFS connection (via the WFS tab in the dialog),
and then connect to ... Richard Duivenvoorde
08:37 PM Bug report #17187: Attribute Table refresh issue: I think #17280 is a duplicate.
Related to #17262, which also concerns data entry in attribute table 'table view'. Steve Lowman
08:32 PM Bug report #17262: Attribute table data entered text is obscured by the 'x' button: cross reference to bug 17289.
Both bugs are concerning data entry in attribute table 'table view'.
It may be effici... Steve Lowman
08:30 PM Bug report #17262: Attribute table data entered text is obscured by the 'x' button: Attached video shows characters being typed are obscured by the 'clear' button, because there is no right margin on t... Steve Lowman
07:14 PM Feature request #11732: Update MetaSearch plugin icon: Thanks Tom, I think that's going the right direction. Have you tried some binoculars, like you previously mentioned? ... Anita Graser
04:07 PM Feature request #11732: Update MetaSearch plugin icon: Anita: I'd like to go ahead with https://issues.qgis.org/attachments/download/9786/MetaSearch.svg
Any comments/sug... Tom Kralidis
05:10 PM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS: I do not think this is a documentation issue: if in the map canvas, the features are shown overlaping each others, th... Harrissou Santanna
12:19 PM Bug report #17277 (Feedback): Atlas - filter attribute table return empty table if layers haven't...: I think that possibly the documentation assumes that if a user is working with layers in different CRSs then OTF is e... Giovanni Manghi
04:57 PM Bug report #17281 (Open): Composer shortcuts issues when using languages other than english: Giovanni Manghi
04:55 PM Bug report #17281: Composer shortcuts issues when using languages other than english: It depends. I've check some other languages. In catalan is the same as spanish. In german and danish cntrl+C and cntr... Daniel Rodriguez
12:21 PM Bug report #17281 (Feedback): Composer shortcuts issues when using languages other than english: Only true for Spanish? or also other languages? Giovanni Manghi
12:21 PM Bug report #17281 (Feedback): Composer shortcuts issues when using languages other than english: Only true for Spanish? or also other languages? Giovanni Manghi
12:21 PM Bug report #17281 (Feedback): Composer shortcuts issues when using languages other than english: Only true for Spanish? or also other languages? Giovanni Manghi
04:21 PM Bug report #17196: Rubber band is not correctly displayed when map is rotated: Confirmed here (wanted to create an issue and then found this one).
Current master Debian
To reproduce:
- create... Richard Duivenvoorde
02:10 PM Bug report #17266 (Closed): Lines To Polygons, Polygonize and Refactor Fields change all attribut...: Fixed in commit:3dfe1b35ef5a082591aa9d99e15b25d0164ca312
and commit:135aea5ef8929991b36e455bd87e6df153e7d17d
plea... Giovanni Manghi
02:10 PM Bug report #17266 (Closed): Lines To Polygons, Polygonize and Refactor Fields change all attribut...: Fixed in commit:3dfe1b35ef5a082591aa9d99e15b25d0164ca312
and commit:135aea5ef8929991b36e455bd87e6df153e7d17d
plea... Giovanni Manghi
01:16 PM Bug report #17288: QGIS3: OGR processing of scratch layers leads to wrong encoding: Can't tell you. Seems like QGIS2 can't process scratch layers with OGR at all:... Tobias Wendorff
12:46 PM Bug report #17288 (Feedback): QGIS3: OGR processing of scratch layers leads to wrong encoding: Does this also affects 2.18.13? Giovanni Manghi
12:55 PM Bug report #17285: QGIS3: reshape doesn't listen to "avoid intersection": This works as expected on 2.18 so it's a regression. Giovanni Manghi
12:55 PM Bug report #17285: QGIS3: reshape doesn't listen to "avoid intersection": This works as expected on 2.18 so it's a regression. Giovanni Manghi
12:54 PM Bug report #11802 (Closed): reshape tool 'avoid intersections' snapping not working as expected: Giovanni Manghi
12:54 PM Feature request #11069 (Closed): Add snapping and avoid intersection support for the reshape tool: Giovanni Manghi
12:54 PM Bug report #17287 (Open): OGR processing of scratch layers doesn't work: Giovanni Manghi
12:51 PM Bug report #17287: OGR processing of scratch layers doesn't work: Giovanni Manghi wrote:
> isn't this duplicate of #16524 ?
No, I'm using the core function and my processing doesn... Tobias Wendorff
12:45 PM Bug report #17287: OGR processing of scratch layers doesn't work: isn't this duplicate of #16524 ? Giovanni Manghi
02:15 AM Bug report #17287: OGR processing of scratch layers doesn't work: Nyall Dawson wrote:
> Does it work correctly if you add a field to the memory layer?
Yes it does.

> I suspect... Tobias Wendorff
12:42 PM Bug report #13398 (Feedback): Georeferencer produce images in wrong crs in 2.10 and master: Tobias Wendorff wrote:
> Sorry for boosting this in reference to: #17138
>
> In Europe, more and more cadastral o... Giovanni Manghi
12:42 PM Bug report #13398 (Feedback): Georeferencer produce images in wrong crs in 2.10 and master: Tobias Wendorff wrote:
> Sorry for boosting this in reference to: #17138
>
> In Europe, more and more cadastral o... Giovanni Manghi
12:36 PM Bug report #16718 (Feedback): QGIS MSSQL Layer creation error in OSX: Giovanni Manghi
12:34 PM Bug report #16718: QGIS MSSQL Layer creation error in OSX: Mick Collopy wrote:
> This post suggest may the linux distros are not compiled with the driver
> http://osgeo-org.1... Jürgen Fischer
09:14 AM Bug report #16718: QGIS MSSQL Layer creation error in OSX: I have no trouble at all from windows desktop - not it is on localhost, but evidently the native provider loads the d... Mick Collopy
12:35 PM Bug report #6413 (Feedback): Support SLD with multiple FeatureTypeStyles: Giovanni Manghi
12:34 PM Bug report #14170: <se:ElseFilter/> nor working when styling data with sld: Andrea Aime wrote:
> Question, does QGIS even have a concept of "else filter"? That is, a rule that will match anyth... Giovanni Manghi
12:29 PM Bug report #17278: Cannot install QGIS 2.18 on Ubuntu 17.04: Giovanni Manghi wrote:
> The code of the QGIS web site is in the project GitHub page, propose a better way of presen... Jürgen Fischer
12:17 PM Bug report #17278 (Closed): Cannot install QGIS 2.18 on Ubuntu 17.04: The code of the QGIS web site is in the project GitHub page, propose a better way of presenting those instructions, t... Giovanni Manghi
12:17 PM Bug report #17278 (Closed): Cannot install QGIS 2.18 on Ubuntu 17.04: The code of the QGIS web site is in the project GitHub page, propose a better way of presenting those instructions, t... Giovanni Manghi
11:58 AM Bug report #17286: Instant 3d renderer crash with dataset: I can reproduce the crash... a temporary solution would be to switch to a projected CRS (e.g. meters as map units) - ... Martin Dobias
11:10 AM Bug report #17118 (Closed): reshape tool reset Z values when extending lines - only with some dat...: Applied in changeset commit:qgis|cfec1250a94eaf6617675b7b08dbd888c8570e2f. Paul Blottiere
11:10 AM Bug report #17118 (Closed): reshape tool reset Z values when extending lines - only with some dat...: Applied in changeset commit:qgis|cfec1250a94eaf6617675b7b08dbd888c8570e2f. Paul Blottiere
10:53 AM Feature request #17073 (Closed): Use the Map extent custom widget for the "Download OpenStreetMap...: Closed, as OSM plugin removed from QGIS. Alexander Bruy
10:53 AM Feature request #17073 (Closed): Use the Map extent custom widget for the "Download OpenStreetMap...: Closed, as OSM plugin removed from QGIS. Alexander Bruy
10:26 AM Bug report #17234 (Closed): Saving style in postgres database can't be restored when connection u...: Applied in changeset commit:qgis|924ce8179002e5890e6735d22b23e132387e0626. Paul Blottiere
10:26 AM Bug report #17234 (Closed): Saving style in postgres database can't be restored when connection u...: Applied in changeset commit:qgis|924ce8179002e5890e6735d22b23e132387e0626. Paul Blottiere
10:01 AM Bug report #17279: Working with QgisBrowser widget makes my QGIS crash more often: Another dump (not related to the QgisBrowser):... Richard Duivenvoorde
09:08 AM Bug report #16716: QGIS MSSQL connection creation issue: I have no trouble connecting to MSSQL from Windows desktop but Linux (Ubuntu) desktop produces 'driver not laoded' er... Mick Collopy
05:27 AM Bug report #11790: Python bindings for QgsDxfExport.addLayers causes crash: I can confirm that this is still an issue in 2.18.13 Iain Lopata

2017-10-15

01:48 AM Bug report #17287 (Feedback): OGR processing of scratch layers doesn't work: Does it work correctly if you add a field to the memory layer?
I suspect this issue isn't related to the use of a ... Nyall Dawson
01:42 AM Bug report #17287: OGR processing of scratch layers doesn't work: Argh... of course the comma is wrong. It expects a field! But this isn't needed... Tobias Wendorff
01:30 AM Bug report #17287: OGR processing of scratch layers doesn't work: Copy of the error message:... Tobias Wendorff
01:29 AM Bug report #17287 (Closed): OGR processing of scratch layers doesn't work: I've created a point on a scratch layer (EPSG:4326) and want to create an ogr2ogr buffer using "processing".
The res... Tobias Wendorff
01:36 AM Bug report #17288 (Closed): QGIS3: OGR processing of scratch layers leads to wrong encoding: I've created a point on a scratch layer and set this UTF-8 string to a text field: ... Tobias Wendorff
01:07 AM Bug report #17286 (Closed): Instant 3d renderer crash with dataset: Enabling a 3d renderer with the attached dataset results in an instant crash when a 3d map view is open.
I've atta... Nyall Dawson
12:43 AM Bug report #17285 (Closed): QGIS3: reshape doesn't listen to "avoid intersection": I don't know if it's even planned, but you could expect that reshaping of a polygon follows the rules of "snapping an... Tobias Wendorff
12:33 AM Bug report #17284 (Closed): QGIS3: setting in snapping toolbar not highlighted: If you select an entry in the new snapping toolbar (fe."active layer"), the selection is not highlighted in gray (as ... Tobias Wendorff
12:26 AM Bug report #16596: snapping advanced configuration does not show snapping dialog: I also was confused about "dialog" and "dock". It's still in dev. Also, the new snapping toolbar is hidden in menu it... Tobias Wendorff
11:39 PM Bug report #17283 (Closed): qgis will not start after installation with osgeo4w Master 2.99, rev 190: probably already fixed. Jürgen Fischer
11:39 PM Bug report #17283 (Closed): qgis will not start after installation with osgeo4w Master 2.99, rev 190: probably already fixed. Jürgen Fischer
05:26 PM Bug report #17283 (Closed): qgis will not start after installation with osgeo4w Master 2.99, rev 190: thema describse it Gerhard Spieles
10:08 PM Bug report #13398: Georeferencer produce images in wrong crs in 2.10 and master: Sorry for boosting this in reference to: #17138
In Europe, more and more cadastral offices and corporations are sw... Tobias Wendorff
04:18 PM Bug report #17282 (Closed): Legend image for root group of WMS service: If open root group of WMS service then legend image only for one layer will be displayed at table of contents. dr -
03:56 PM Bug report #17281 (Closed): Composer shortcuts issues when using languages other than english: Shortcuts like DEL, control+C or Control+V aren't working in the Map Composer when using Spanish language. When using... Daniel Rodriguez
10:37 AM Bug report #17280: When switch between filtered modes, the edited cells stop updating themselves.: Additional info:
Not affected: 2.18.9 (late May release)
Start being affected from: 2.18.10 (late June release)
... sand thorn
08:51 AM Bug report #17138: wrong SRS identification of shapefile: I just got informed that EPSG:25833 (eastern part of German) is interpreted as EPSG:3006. In Europe, more and more ca... Tobias Wendorff
07:46 AM Bug report #17278: Cannot install QGIS 2.18 on Ubuntu 17.04: Another alternative would be to have a unified Linux installer script that would determine the platform and run the a... Brylie Oxley
07:29 AM Bug report #17278: Cannot install QGIS 2.18 on Ubuntu 17.04: See the Certbot installation instructions,for example, where the reader makes two relevant choices and is presented w... Brylie Oxley
07:25 AM Bug report #17278: Cannot install QGIS 2.18 on Ubuntu 17.04: I guess it is not that information is missing from the installation instructions page. Rather, the information is pre... Brylie Oxley

2017-10-14

09:47 PM Bug report #17278: Cannot install QGIS 2.18 on Ubuntu 17.04: > It might be helpful to clearly document the installation steps, including key signing for APT as part of the QGIS ... Harrissou Santanna
09:29 AM Bug report #17278: Cannot install QGIS 2.18 on Ubuntu 17.04: Sorry, it boiled down to my using the wrong release name. Ubuntu 17.10 is 'Zesty', and I was using 'Yakkety'. It migh... Brylie Oxley
09:18 AM Bug report #17278 (Closed): Cannot install QGIS 2.18 on Ubuntu 17.04: I am trying to install QGIS 2.18 from the official repositories, on Ubuntu 17.04:
http://qgis.org/en/site/forusers/a... Brylie Oxley
08:54 PM Bug report #17280 (Closed): When switch between filtered modes, the edited cells stop updating th...: When switch from "Show all features" to "Show selected features" or
from "Show selected features" to "Show all featu... sand thorn
03:07 PM Bug report #16963: Metasearch error on QGIS start on Fedora: Just to add my experiences on this issue. I think this is really a Fedora 26 Bug:
https://bugzilla.redhat.com/show... Davor Racic
02:37 PM Bug report #17279 (Closed): Working with QgisBrowser widget makes my QGIS crash more often: I really, really like the new 'one button to load them all' one.
But recently I have a more crashes, while using... Richard Duivenvoorde
12:06 PM Bug report #16413 (Closed): sld line pattern fill rotation is counter-clockwise, in GeoServer is ...: From the SLD specification:
"The Rotation element gives the rotation of a graphic in the clockwise direction about... Andrea Aime
12:06 PM Bug report #16413 (Closed): sld line pattern fill rotation is counter-clockwise, in GeoServer is ...: From the SLD specification:
"The Rotation element gives the rotation of a graphic in the clockwise direction about... Andrea Aime
12:06 PM Bug report #16413 (Closed): sld line pattern fill rotation is counter-clockwise, in GeoServer is ...: From the SLD specification:
"The Rotation element gives the rotation of a graphic in the clockwise direction about... Andrea Aime
11:56 AM Bug report #6155: SLD Export fails to write out LineSymbolizer Stroke information: Hi Jody, do you have a reference to the symbology used in this report?
Do you know if the reported issue is still c... Andrea Aime
11:53 AM Bug report #6413: Support SLD with multiple FeatureTypeStyles: Hi Luigi, any reason why this ticket is still open? Andrea Aime
11:51 AM Feature request #6414 (Closed): Export SLD with TextSymbolizer: Fixed in QGIS 3.0 Andrea Aime
11:51 AM Feature request #6414 (Closed): Export SLD with TextSymbolizer: Fixed in QGIS 3.0 Andrea Aime
11:51 AM Bug report #7064: "cross2" symbol should be exported in SLD as "x": Updated the title to reflect the current situation Andrea Aime
11:50 AM Bug report #7064: "cross2" symbol should be exported in SLD as "x": I've just tried, the square symbol is properly exported as square, but indeed "cross2" should be exported as "x" inst... Andrea Aime
11:45 AM Bug report #7759 (Closed): Creates mis-styled SLD file: Just tested with 2.18.x, the SLD appears to properly reference the SVG, with the right size, and expected filter incl... Andrea Aime
11:45 AM Bug report #7759 (Closed): Creates mis-styled SLD file: Just tested with 2.18.x, the SLD appears to properly reference the SVG, with the right size, and expected filter incl... Andrea Aime
11:45 AM Bug report #7759 (Closed): Creates mis-styled SLD file: Just tested with 2.18.x, the SLD appears to properly reference the SVG, with the right size, and expected filter incl... Andrea Aime
11:38 AM Bug report #7760 (Closed): SLD using "size" wrongly for graphics: I believe this issue has been fixed over a year ago as part of rescaling the default QGIS units, mm, to the pixel one... Andrea Aime
11:38 AM Bug report #7760 (Closed): SLD using "size" wrongly for graphics: I believe this issue has been fixed over a year ago as part of rescaling the default QGIS units, mm, to the pixel one... Andrea Aime
11:38 AM Bug report #7760 (Closed): SLD using "size" wrongly for graphics: I believe this issue has been fixed over a year ago as part of rescaling the default QGIS units, mm, to the pixel one... Andrea Aime
11:35 AM Bug report #9365 (Closed): QGIS save as SLD style for graduated styled layer different from what ...: This has been fixed by Nyall over a year ago: commit:5c270ebeb0aaaaaf03c24e7d2379c89ebee7b895
in reference to #15212 Andrea Aime
11:35 AM Bug report #9365 (Closed): QGIS save as SLD style for graduated styled layer different from what ...: This has been fixed by Nyall over a year ago: commit:5c270ebeb0aaaaaf03c24e7d2379c89ebee7b895
in reference to #15212 Andrea Aime
11:35 AM Bug report #9365 (Closed): QGIS save as SLD style for graduated styled layer different from what ...: This has been fixed by Nyall over a year ago: commit:5c270ebeb0aaaaaf03c24e7d2379c89ebee7b895
in reference to #15212 Andrea Aime
11:28 AM Bug report #16707 (Closed): SLD export of "hairline" lines results in a different visual thickness: Fixed in QGIS 3.0 for the original ticket report (SLD).
As for PDF, I would suggest to open a separate ticket. Andrea Aime
11:28 AM Bug report #16707 (Closed): SLD export of "hairline" lines results in a different visual thickness: Fixed in QGIS 3.0 for the original ticket report (SLD).
As for PDF, I would suggest to open a separate ticket. Andrea Aime
11:28 AM Bug report #16707 (Closed): SLD export of "hairline" lines results in a different visual thickness: Fixed in QGIS 3.0 for the original ticket report (SLD).
As for PDF, I would suggest to open a separate ticket. Andrea Aime
11:26 AM Bug report #11075: SLD - incorrect width of symbol used in import: I'm guessing that the import just uses the default unit (mm) instead of the SLD unit (pixels by default). Andrea Aime
11:25 AM Bug report #14170: <se:ElseFilter/> nor working when styling data with sld: Question, does QGIS even have a concept of "else filter"? That is, a rule that will match anything that has not been ... Andrea Aime
11:17 AM Bug report #15429 (Open): SLD export does not include the feature filter: Whoops, nope, closed wrong ticket, this one is still valid Andrea Aime
11:17 AM Bug report #15429 (Open): SLD export does not include the feature filter: Whoops, nope, closed wrong ticket, this one is still valid Andrea Aime
11:15 AM Bug report #15429 (Closed): SLD export does not include the feature filter: Fixed a year ago and backported to 2.18.x too Andrea Aime
11:15 AM Bug report #15429 (Closed): SLD export does not include the feature filter: Fixed a year ago and backported to 2.18.x too Andrea Aime
11:15 AM Bug report #15429 (Closed): SLD export does not include the feature filter: Fixed a year ago and backported to 2.18.x too Andrea Aime
11:16 AM Bug report #15428 (Closed): SLD export does not export the layer scale range: Fixed one year ago Andrea Aime
11:16 AM Bug report #15428 (Closed): SLD export does not export the layer scale range: Fixed one year ago Andrea Aime
11:06 AM Feature request #17054: importing/exporting to sld should use a rotation by field value if available: Also, this seems to be a (tiny) subset of larger ticket #15430 Andrea Aime
10:58 AM Feature request #17054: importing/exporting to sld should use a rotation by field value if available: Hi Paul, no attribute based symbology, of any kind, is supported in import/export. We have been looking for funding t... Andrea Aime

2017-10-13

10:56 PM Bug report #17277 (Closed): Atlas - filter attribute table return empty table if layers haven't t...: I just met this problem.
I have an atlas with a coverage layer (polygon) in EPSG:2154 and an attribute table from ... Loïc BARTOLETTI
02:55 PM Bug report #17118: reshape tool reset Z values when extending lines - only with some data providers: ... Regis Haubourg
12:07 PM Bug report #17118: reshape tool reset Z values when extending lines - only with some data providers: https://github.com/qgis/QGIS/pull/5349
by the way, was this a regression? Giovanni Manghi
01:03 PM Feature request #17276 (Open): add scram authentication for postgres: Since postgresql 10 there is a new authentication method 'scram-sha265'. new version of libpq are fully compatible wi... Rémi Desgrange
12:05 PM Bug report #16649 (Closed): additional "no Data values" using the Layer Styling panel are not app...: Giovanni Manghi
11:45 AM Feature request #17273 (Open): Respect coordinate system (CRS) when outputFormat=GeoJSON: We are using Geoserver 2.11.0 (latest is 2.11.2) and it does return different crs's. Henrik Uggla
11:10 AM Feature request #17273 (Feedback): Respect coordinate system (CRS) when outputFormat=GeoJSON: Giovanni Manghi
11:07 AM Feature request #17273: Respect coordinate system (CRS) when outputFormat=GeoJSON: Hi Henrik,
Officially Geojson is always in epsg:4326 / lat lon coordinates:
https://tools.ietf.org/html/rfc7946#p... Richard Duivenvoorde
09:56 AM Feature request #17273 (Feedback): Respect coordinate system (CRS) when outputFormat=GeoJSON: Following request returns correct coordinate system:
http://193.17.67.229/cgi-bin/fastighetsindelning/?service=WFS... Henrik Uggla
11:17 AM Feature request #17275 (Open): Merge different progress bars: Having some long running task, I had at a certain moment 3 progress bars in view, see screenshot :-)
Would be cool... Richard Duivenvoorde
10:23 AM Feature request #17274 (Open): Auto wrap legend text based on character count: In QGIS 2.18 there is an option to wrap text based on a certain character. There is no option to access expression bu... Hannes Ledegen
10:11 AM Bug report #15903: Creating _packed shapefiles and fails to save edits correctly: I just encountered the attached corrupted shapefile. A co-worker edited the file yesterday and didn't notice any erro... Kai Borgolte

2017-10-12

12:47 AM Bug report #16649: additional "no Data values" using the Layer Styling panel are not applied: Pull request submitted. https://github.com/qgis/QGIS/pull/5358 James Shaeffer
03:10 PM Bug report #15498 (Closed): SQLite/GPKG database locked during canvas refresh: Applied in changeset commit:qgis|8364b8d715fe8cf8d057c05f5a898c22232a47a2. Luigi Pirelli
03:10 PM Bug report #15498 (Closed): SQLite/GPKG database locked during canvas refresh: Applied in changeset commit:qgis|8364b8d715fe8cf8d057c05f5a898c22232a47a2. Luigi Pirelli
03:02 PM Bug report #17272 (Closed): QGIS shows different geometry type in layer 'information' then ogrinfo: Now that we go 3D...
Loading a 3D polygon layer, for example this GDB:
http://services.arcgisonline.nl/3D_kaart_N... Richard Duivenvoorde
02:49 PM Bug report #17267 (Closed): Processing/GeoPackage, Set Z Value, expression based input does not s...: Richard Duivenvoorde
10:10 AM Bug report #17267 (Feedback): Processing/GeoPackage, Set Z Value, expression based input does not...: > Close this one then?
I would suggest at least to change the title and description of this ticket. Thanks! Giovanni Manghi
11:59 AM Bug report #17261 (Open): Value relation widget update incorrectly tries to use value instead of key: Giovanni Manghi
11:53 AM Bug report #17261: Value relation widget update incorrectly tries to use value instead of key: Hi Giovanni. Yes I tested and the same procedure seems to work in 2.18 but not in QGIS 3. I will go and triple check... Tim Sutton
04:42 AM Feature request #17271 (Open): Port align rasters tool to processing: This is one of the few analysis tools we have remaining which is not accessible through the processing framework.
Nyall Dawson

2017-10-11

09:19 PM Bug report #17268 (Closed): Default value expression editor doesn't show field list: This isn't supported. The default values are calculated on new feature creation, which is before any values are avail... Nyall Dawson
09:19 PM Bug report #17268 (Closed): Default value expression editor doesn't show field list: This isn't supported. The default values are calculated on new feature creation, which is before any values are avail... Nyall Dawson
05:03 PM Bug report #17268: Default value expression editor doesn't show field list: see #15935 Harrissou Santanna
04:57 PM Bug report #17268: Default value expression editor doesn't show field list: confirmed on master too. Was already there in 2.18.10 Regis Haubourg
09:02 AM Bug report #17268 (Closed): Default value expression editor doesn't show field list: One can't select field names in expression tool for default values :
!https://user-images.githubusercontent.com/86... Arnaud Poncet-Montanges
10:27 AM Bug report #17270 (Open): Circular string : after finishing digitizing a circular string, the too...: Also found by Nyall and reproduce by me for circular string in 2.18
after finishing digitizing a circular string, ... Loïc BARTOLETTI
10:06 AM Bug report #17269 (Open): Circular string doesn't honor the coordinate system: Problem found by Nyall "reviewing":https://github.com/qgis/QGIS/pull/4947#issuecomment-335291640 the new tools for Ci... Loïc BARTOLETTI
09:37 AM Bug report #16296 (Closed): Windows: Cannot use anymore d&d in DB Manager to import a layer from ...: Applied in changeset commit:qgis|378ab23f4d8b2fc683d8d4f075aeae695c44bf8c. Luigi Pirelli
09:37 AM Bug report #16296 (Closed): Windows: Cannot use anymore d&d in DB Manager to import a layer from ...: Applied in changeset commit:qgis|378ab23f4d8b2fc683d8d4f075aeae695c44bf8c. Luigi Pirelli
08:35 AM Bug report #17267: Processing/GeoPackage, Set Z Value, expression based input does not show fields: Ok, Nyall, thanks for the clarification. I think this is more a UI-thing then?
Not sure if only changing the butto... Richard Duivenvoorde
08:27 AM Bug report #17267: Processing/GeoPackage, Set Z Value, expression based input does not show fields: It's because that "expression" button is a bit misleading - it's there only for "instant" calculations. So you can us... Nyall Dawson

2017-10-10

12:02 PM Bug report #17267 (Closed): Processing/GeoPackage, Set Z Value, expression based input does not s...: Having a building geopackage with an attribute 'gemiddelde hoogte' == mean height, I thought to use the 'Set Z Value'... Richard Duivenvoorde
09:26 AM Bug report #17264 (Closed): Segmentation fault with custom form: duplicate of #8760
If not please reopen. Giovanni Manghi
09:26 AM Bug report #17264 (Closed): Segmentation fault with custom form: duplicate of #8760
If not please reopen. Giovanni Manghi
06:02 AM Bug report #17266 (Closed): Lines To Polygons, Polygonize and Refactor Fields change all attribut...: On my two Windows 10 systems running QGIS Desktop 2.18 for Windows 64-bit, output attribute tables produced by the Li... John Browne

2017-10-09

01:16 AM Feature request #17265 (Open): Choosing 'layer_styles' schema: For projects with shared spatial databases, it would be interesting to add the ability to choose the default schema t... Frédéric CLOITRE
12:55 AM Bug report #17264 (Closed): Segmentation fault with custom form: Hi,
I noticed a segmentation fault that makes QGIS crash while opening a custom form after clicking on the geograp... Frédéric CLOITRE
12:53 AM Bug report #17192: Python error in Processing/QGIS clip: No problem. Thanks Giovanni. Ben Wirf
07:31 PM Bug report #17192: Python error in Processing/QGIS clip: Ben Wirf wrote:
> I am still getting this global name 'features' is not defined error message when trying to run the... Giovanni Manghi
06:24 AM Bug report #17192: Python error in Processing/QGIS clip: I am still getting this global name 'features' is not defined error message when trying to run the QGIS clip tool in ... Ben Wirf
04:27 PM Bug report #17263 (Closed): [Symbology]Clip features to canvas extent displayed twice: When setting the symbology of a layer (let's use single symbol), at the bottom of the dialog, in the Advanced drop-do... Harrissou Santanna
12:17 PM Bug report #17165: QGIS crashes when attempting to get scripts from on-line scripts collection (R...: Brilliant! Thanks so much for your help. I made the fix and learned more about my OS today. Cheers for the fix and th... David Wright
09:33 AM Bug report #17165: QGIS crashes when attempting to get scripts from on-line scripts collection (R...: David Wright wrote:
> "python/plugins/processing/gui/GetScriptsAndModels.py" doesn't exist in my .qgis folder (see s... Harrissou Santanna
11:58 AM Bug report #17262 (Closed): Attribute table data entered text is obscured by the 'x' button: In QGIS 2.18 attribute table data entry, once the cell is full of text, the newly entered text is obscured at the rig... Steve Lowman

2017-10-08

12:30 AM Bug report #14589 (Closed): GetCapabilities gets cached in a confusing way (even when QGIS cache ...: Giovanni Manghi
11:01 PM Bug report #17261 (Feedback): Value relation widget update incorrectly tries to use value instead...: Works as expected on QGIS LTR? Giovanni Manghi
10:45 PM Bug report #17261 (Closed): Value relation widget update incorrectly tries to use value instead o...: I am having a problem using the value relation widget in QGIS 2.99999 / master. Here is my simple scenario:
!schem... Tim Sutton
10:10 PM Feature request #17260 (Open): [QGIS3 Unified add layer] Add a dedicated entry for opening spread...: It would be useful to add an explicit entry for opening non spatial tabular data like ods, xls or dbf. It's really un... Dominique Lyszczarz
10:05 PM Bug report #17259 (Closed): QGIS3 New node tool lack the ability to add or remove vertices from t...: With the new node tool it's possible to select multiple vertices by drawing a rectangle but its not possible to add o... Dominique Lyszczarz
09:37 PM Bug report #17165: QGIS crashes when attempting to get scripts from on-line scripts collection (R...: David Wright wrote:
> "python/plugins/processing/gui/GetScriptsAndModels.py" doesn't exist in my .qgis folder (see s... Giovanni Manghi

2017-10-07

12:26 AM Bug report #17165: QGIS crashes when attempting to get scripts from on-line scripts collection (R...: "python/plugins/processing/gui/GetScriptsAndModels.py" doesn't exist in my .qgis folder (see screenshot). I also did ... David Wright
12:29 PM Bug report #17165 (Closed): QGIS crashes when attempting to get scripts from on-line scripts coll...: David Wright wrote:
> The issue isn't fixed. I just downloaded 2.18.13-1
does it really contain the fix?
sea... Giovanni Manghi
12:29 PM Bug report #17165 (Closed): QGIS crashes when attempting to get scripts from on-line scripts coll...: David Wright wrote:
> The issue isn't fixed. I just downloaded 2.18.13-1
does it really contain the fix?
sea... Giovanni Manghi
03:21 AM Bug report #17165 (Reopened): QGIS crashes when attempting to get scripts from on-line scripts co...: The issue isn't fixed. I just downloaded 2.18.13-1 and tried to load in online scripts and it crashed again. This ti... David Wright
04:13 PM Bug report #17258: Custom CRS Definition dialog is unusable: We have so many places in the GUI where entries are added to a list that work much better (e.g. in rule-based rendere... Anita Graser
04:09 PM Bug report #17258 (Closed): Custom CRS Definition dialog is unusable: The Custom CRS Definition dialog is a mess. Most of the time, I cannot make it save the new CRS I'm trying to add. At... Anita Graser
04:05 PM Bug report #17257 (Closed): Custom project CRS is not restored correctly on project load: I have a project with a custom CRS used as the project CRS. (Specifically: +proj=ortho +lat_0=42.1 +lon_0=12.8 +x_0=0... Anita Graser
12:31 PM Bug report #17255 (Feedback): closed maps: Hi,
you really need to give us more details about what is your issue. Thanks. Giovanni Manghi
12:31 PM Bug report #17255 (Feedback): closed maps: Hi,
you really need to give us more details about what is your issue. Thanks. Giovanni Manghi
12:06 PM Bug report #17242: QGIS 3 is storing cache in windows roaming profile?: On my side, I usually set a low cache size value in the settings to avoid this but that's true that cache should be i... Regis Haubourg

2017-10-06

09:40 PM Feature request #17195: Open a database connection from metadata: Hi Joana: comments:
- let's target master for this given it's a feature
- can you submit a PR to the Cat-Interop ... Tom Kralidis
10:43 AM Feature request #17195: Open a database connection from metadata: Tom Kralidis wrote:
> Hi Paul: sounds feasible. notes:
>
> - suggest we use the SQLAlchemy convention (http://doc... Joana Simoes
09:19 PM Bug report #17218: OS X install looks for PyQt4 instead of PyQt5: Great, thanks. I've been using this, from David Marteau with supplements:... David Liontooth
02:26 AM Bug report #17218: OS X install looks for PyQt4 instead of PyQt5: David Liontooth wrote:
> How can I tell install to look for PyQt5?
What were your cmake options? I have found tha... Joel Buckley
08:35 PM Bug report #17256 (Closed): SpatiaLite Layer default style is not loaded when using the SpatiaLit...: When loading a SpatiaLite layer with the SpatiaLite provider, QGIS doesn't load the layer's default style.
Loading w... Borys Jurgiel
08:11 PM Bug report #17255 (Closed): closed maps: I have opened up my projects page and I can't open some of my maps that were saved. Why is this? Jennifer Floyd
07:51 PM Bug report #14752: GEOS exceptions crash QGIS on windows: Yes, I can set the correct CRS manually, and so far 2.99 doesn't seem to crash ... but we've observed this behavior w... Anita Graser
07:33 PM Bug report #14752: GEOS exceptions crash QGIS on windows: > 2.99 does not crash, but the project CRS and some layer CRS are not restored correctly :(
but this could be an... Giovanni Manghi
07:27 PM Bug report #14752: GEOS exceptions crash QGIS on windows: 2.14.19 and 2.18.13 crash for me.
2.99 does not crash, but the project CRS and some layer CRS are not restored cor... Anita Graser
08:46 AM Bug report #14752 (Feedback): GEOS exceptions crash QGIS on windows: Tried again on master... and here with MT enabled it seems to not crash... what about others? Giovanni Manghi
07:09 PM Bug report #17254 (Closed): Wrong output CRS when input layer uses generated CRS: Tested with qgis:fixeddistancebuffer, native:dissolve, and native:buffer using OSGeo4W 2.99
If the input layer use... Anita Graser
06:20 PM Bug report #17184 (Closed): QGIS under macOS is very crashy when loading zipped shapefiles: Applied in changeset commit:qgis|cee7baeb483d423d037bc347a06383995f8fdf70. Anonymous
06:20 PM Bug report #17184 (Closed): QGIS under macOS is very crashy when loading zipped shapefiles: Applied in changeset commit:qgis|cee7baeb483d423d037bc347a06383995f8fdf70. Anonymous
08:40 AM Bug report #17184: QGIS under macOS is very crashy when loading zipped shapefiles: Thanks Larry! Giovanni Manghi
05:17 AM Bug report #17184: QGIS under macOS is very crashy when loading zipped shapefiles: Issue replicated and fixed for me here on macOS 10.11.6:
https://github.com/qgis/QGIS/pull/5307 Larry Shaffer
01:20 PM Bug report #17150: Processing: output for standard NxT distance matrix now wrong: Fixed in 2.18 Alexander Bruy
01:15 PM Bug report #11572: Filter Legend By Map Content doesn't maintain point displacement legend: The bug is still present in 2.18.13 Ivan Katanović
01:15 PM Bug report #17249 (Closed): v.net.report and v.net.nreport: Sergio Antonio wrote:
> Following in your footsteps, I also checked the tools in GRASS7 and concluded that the resul... Giovanni Manghi
01:15 PM Bug report #17249 (Closed): v.net.report and v.net.nreport: Sergio Antonio wrote:
> Following in your footsteps, I also checked the tools in GRASS7 and concluded that the resul... Giovanni Manghi
01:15 PM Bug report #17249 (Closed): v.net.report and v.net.nreport: Sergio Antonio wrote:
> Following in your footsteps, I also checked the tools in GRASS7 and concluded that the resul... Giovanni Manghi
01:12 PM Bug report #17249: v.net.report and v.net.nreport: Following in your footsteps, I also checked the tools in GRASS7 and concluded that the results from v.net.report and ... Sergio Antonio
12:55 PM Bug report #16942: WMS/WFS layers do not show in the OWS group of the QGIS browser: Affects also master... can't we just get rid of "OWS" in browser? Giovanni Manghi
12:22 PM Bug report #16926: GRASS/Processing stopped to warn the user when a layer is not outputted: This only affects the GRASS tools that are added as "external" tools using python scripts i.e.
python\plugins\proc... Giovanni Manghi
12:22 PM Bug report #16926: GRASS/Processing stopped to warn the user when a layer is not outputted: This only affects the GRASS tools that are added as "external" tools using python scripts i.e.
python\plugins\proc... Giovanni Manghi
12:22 PM Bug report #16926: GRASS/Processing stopped to warn the user when a layer is not outputted: This only affects the GRASS tools that are added as "external" tools using python scripts i.e.
python\plugins\proc... Giovanni Manghi
12:18 PM Bug report #17253 (Feedback): The canvas and the composer are overlaid in the canvas: I can't see how we possible replicate/troubleshoot this. Giovanni Manghi
11:57 AM Bug report #17253 (Closed): The canvas and the composer are overlaid in the canvas: This bug will be very difficult to reproduce...
With a low connection and heavy data, I've had this problem once.
... Loïc BARTOLETTI
10:56 AM Bug report #17245: "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: Patrick Dunford wrote:
> It is actually possible to filter a shapefile and then edit it, this is something I use fro... Giovanni Manghi
10:53 AM Bug report #17245: "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: It is actually possible to filter a shapefile and then edit it, this is something I use from time to time. Patrick Dunford
10:50 AM Bug report #17245: "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: Patrick Dunford wrote:
> That bug that means you have to muck around and close/reopen a project has been in Qgis sin... Giovanni Manghi
10:44 AM Bug report #17245: "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: That bug that means you have to muck around and close/reopen a project has been in Qgis since the beginning of time, ... Patrick Dunford
08:33 AM Bug report #17245: "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: Patrick Dunford wrote:
> The problem is only occurring with masters after 313ec55 which has no difficulty in adding ... Giovanni Manghi
09:34 AM Feature request #17225 (Closed): Improvement of Map tip translation: Applied in changeset commit:qgis|fb15a218eac3282e6ee2f8ebe4b05091f15ac6e6. Anonymous
09:34 AM Feature request #17225 (Closed): Improvement of Map tip translation: Applied in changeset commit:qgis|fb15a218eac3282e6ee2f8ebe4b05091f15ac6e6. Anonymous
09:15 AM Bug report #17165 (Closed): QGIS crashes when attempting to get scripts from on-line scripts coll...: Applied in changeset commit:qgis|afb49eca29652635e782187f54216341766c5f9f. Anonymous
09:15 AM Bug report #17165 (Closed): QGIS crashes when attempting to get scripts from on-line scripts coll...: Applied in changeset commit:qgis|afb49eca29652635e782187f54216341766c5f9f. Anonymous
08:38 AM Bug report #17252 (Feedback): Can't make install QGIS master on OS X (crashes on launch): This should not be posted here as a bug but as question on one of the several channels where the community gathers, t... Giovanni Manghi
03:45 AM Bug report #17252 (Closed): Can't make install QGIS master on OS X (crashes on launch): I have installed the necessary frameworks on OS X, and the `make` process completes successfully. I am even able to s... Joel Buckley
03:26 AM Feature request #17251 (Feedback): Polygon map window in print composer: Got an example of the result you're after? Nyall Dawson
03:10 AM Feature request #17251 (Feedback): Polygon map window in print composer: Would it be possible to add the ability to create a map window in print composer using a custom polygon?
This woul... Ian Bishop

2017-10-05

11:48 PM Bug report #17250 (Closed): Composer LatLon GRID rendering issues on global scale for Cylindrical...: I have a map in the composer in some Cylindrical projection (e.g. EPSG:54003, EPSG:3857,EPSG:3395) and LatLon labels ... Juraj Betak
10:21 PM Bug report #17245: "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: The problem is only occurring with masters after 313ec55 which has no difficulty in adding to shapefiles while filter... Patrick Dunford
08:24 PM Bug report #17245 (Open): "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: The fact that certain datasources (like shapefiles) are not editable when filtered is known. The behavior become less... Giovanni Manghi
08:24 PM Bug report #17245 (Open): "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: The fact that certain datasources (like shapefiles) are not editable when filtered is known. The behavior become less... Giovanni Manghi
08:24 PM Bug report #17245 (Open): "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: The fact that certain datasources (like shapefiles) are not editable when filtered is known. The behavior become less... Giovanni Manghi
08:24 PM Bug report #17245 (Open): "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: The fact that certain datasources (like shapefiles) are not editable when filtered is known. The behavior become less... Giovanni Manghi
08:24 PM Bug report #17245 (Open): "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: The fact that certain datasources (like shapefiles) are not editable when filtered is known. The behavior become less... Giovanni Manghi
04:48 AM Bug report #17245: "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: Steps to reproduce:
# Apply a filter to the layer: "year" = 1969
# Put the table into edit mode
# Add a new feat... Patrick Dunford
09:23 PM Bug report #17249 (Feedback): v.net.report and v.net.nreport: I executed the same modules directly in GRASS7 (using a layer prepared for network analysis) and got the same results... Giovanni Manghi
09:23 PM Bug report #17249 (Feedback): v.net.report and v.net.nreport: I executed the same modules directly in GRASS7 (using a layer prepared for network analysis) and got the same results... Giovanni Manghi
09:23 PM Bug report #17249 (Feedback): v.net.report and v.net.nreport: I executed the same modules directly in GRASS7 (using a layer prepared for network analysis) and got the same results... Giovanni Manghi
01:17 PM Bug report #17249 (Closed): v.net.report and v.net.nreport: The v.net.repot and v.net.nreport tools are not creating the correct output files. v.net.report has created a file wi... Sergio Antonio
07:48 PM Bug report #17248 (Closed): Can't clip a vector polygon in qgis 2.18.19: Duplicate of #17192
already fixed and will be available in the next 2.18 point release Giovanni Manghi
07:48 PM Bug report #17248 (Closed): Can't clip a vector polygon in qgis 2.18.19: Duplicate of #17192
already fixed and will be available in the next 2.18 point release Giovanni Manghi
06:45 AM Bug report #17248 (Closed): Can't clip a vector polygon in qgis 2.18.19: I want to clip a vector polygon with a boundary vector polygon but the process is failing. I am getting the error, "g... Martin M. Baihaqi
03:30 PM Feature request #17195: Open a database connection from metadata: Which QGIS version would you like to target? the current one (2.18.13) or v3? Joana Simoes
01:27 PM Bug report #16005 (Closed): Update OGR provider for GDAL 2.2 Triangle, TIN, PolyhedralSurface: Done Sandro Mani
11:01 AM Bug report #10976: attribute table refresh problems after edits: Work in 2.18.9 and still the same issue...
The same thing passing by 2 ways: copying and join two shapefiles, at the... Loïc Bouffard
10:49 AM Bug report #16803: Segmentation fault with 'Create raster icons' on and loading a WMS: follow up in: https://github.com/qgis/QGIS/pull/5302 Luigi Pirelli

2017-10-04

01:19 AM Bug report #15599: In spatial views, QGIS shows only 100 rows in attribute-table, when view has m...: summary (pdf) and testproject with spatialite db are attached Gerhard Spieles
01:19 AM Bug report #15599: In spatial views, QGIS shows only 100 rows in attribute-table, when view has m...: summary (pdf) and testproject with spatialite db are attached Gerhard Spieles
10:26 PM Bug report #16427: WMTS rendering problems in 2.18 and Master: Thanks a lot for your work Alessandro! Tudor Bărăscu
01:58 PM Bug report #16427: WMTS rendering problems in 2.18 and Master: Thanks, but I think it's fixed, I still need to backport it to 2.18. Alessandro Pasotti
01:56 PM Bug report #16427: WMTS rendering problems in 2.18 and Master: @Alessandro I could have swore that the GetCapabilities were returning the https part and that I had fixed this issue... Tudor Bărăscu
06:24 PM Bug report #17223 (Open): Error in Processing configuration when using QT5 themes: Giovanni Manghi
05:24 PM Bug report #17223: Error in Processing configuration when using QT5 themes: Giovanni Manghi wrote:
> I can't confirm on Ubuntu 16.04 and Windows.
It seems that the problem is with the QT5 t... Samuel Fernando Mesa Giraldo
06:19 PM Bug report #16803: Segmentation fault with 'Create raster icons' on and loading a WMS: Pull request open to disable unsafe use of the WMS API.
https://github.com/qgis/QGIS/pull/5299/files
In the lon... Matthias Kuhn
05:12 PM Feature request #17195: Open a database connection from metadata: sounds good Tom,
thanks for that pointer to rfc-1738 paul van genuchten
05:10 PM Feature request #17195: Open a database connection from metadata: Hi Paul: sounds feasible. notes:
- suggest we use the SQLAlchemy convention (http://docs.sqlalchemy.org/en/lates... Tom Kralidis
04:56 PM Bug report #15600: Selecting features feature in spatial views and virtual layers leads to wrong ...: The same problem is present in 2.18.13 when adding a spatialite layer through DB MANAGER -SQL Query.
E... Vincent Dionne
04:52 PM Bug report #16005 (In Progress): Update OGR provider for GDAL 2.2 Triangle, TIN, PolyhedralSurface: https://github.com/qgis/QGIS/pull/5298 Sandro Mani
04:52 PM Bug report #16005 (In Progress): Update OGR provider for GDAL 2.2 Triangle, TIN, PolyhedralSurface: https://github.com/qgis/QGIS/pull/5298 Sandro Mani
04:52 PM Bug report #16005 (In Progress): Update OGR provider for GDAL 2.2 Triangle, TIN, PolyhedralSurface: https://github.com/qgis/QGIS/pull/5298 Sandro Mani
04:52 PM Bug report #16005 (In Progress): Update OGR provider for GDAL 2.2 Triangle, TIN, PolyhedralSurface: https://github.com/qgis/QGIS/pull/5298 Sandro Mani
04:03 PM Bug report #14232: select features in a spatialite view leads to wrong_results: Vincent Dionne wrote:
> The same problem is present in 2.18.13 when adding a spatialite layer through DB MANAGER -SQ... Giovanni Manghi
04:03 PM Bug report #14232: select features in a spatialite view leads to wrong_results: Vincent Dionne wrote:
> The same problem is present in 2.18.13 when adding a spatialite layer through DB MANAGER -SQ... Giovanni Manghi
04:01 PM Bug report #14232: select features in a spatialite view leads to wrong_results: The same problem is present in 2.18.13 when adding a spatialite layer through DB MANAGER -SQL Query.
Easy to repli... Vincent Dionne
03:52 PM Bug report #17247 (Closed): Cannot move features, move nodes and edit Z values (with vertex edito...: Subject says it all. 3D points can be moved but still the Z values cannot be changed.
This is a regression since... Giovanni Manghi
03:50 PM Bug report #14007 (Closed): Can't create new features from Postgis Table with Z component: This particular problem (adding a new feature) seems solved in 2.18.13 and master. There are others anyway in 2.18 th... Giovanni Manghi
03:50 PM Bug report #14007 (Closed): Can't create new features from Postgis Table with Z component: This particular problem (adding a new feature) seems solved in 2.18.13 and master. There are others anyway in 2.18 th... Giovanni Manghi
03:50 PM Bug report #14007 (Closed): Can't create new features from Postgis Table with Z component: This particular problem (adding a new feature) seems solved in 2.18.13 and master. There are others anyway in 2.18 th... Giovanni Manghi
03:35 PM Bug report #17243: QGIS 3 vertex editor problems: I also tried and agree... is very annoying that the vertex editor panel does not open automatically. Another bad thin... Giovanni Manghi
01:36 PM Bug report #17243: QGIS 3 vertex editor problems: Andreas Neumann wrote:
> Maybe adding a button to open and close the vertex editor panel in the "advanced editing" t... Giovanni Manghi
10:04 AM Bug report #17243: QGIS 3 vertex editor problems: Maybe adding a button to open and close the vertex editor panel in the "advanced editing" toolbar would help? Andreas Neumann
09:56 AM Bug report #17243: QGIS 3 vertex editor problems: Hi Andreas, this is a very important matter, is being discussed in the users and devs mailing lists? Giovanni Manghi
09:48 AM Bug report #17243 (In Progress): QGIS 3 vertex editor problems: In QGIS 3, the behaviour of the vertex editor panel, has been changed in conjunction with the refactoring of the inte... Andreas Neumann
02:59 PM Bug report #17246 (Closed): When snapping with the node tool (within the same layer or to other l...: Anyway snapping works. When using the tool to add new feature and doing snapping the "x" fuchsia symbol shows as expe... Giovanni Manghi
02:50 PM Bug report #15806 (Closed): snap 3D does not work when editing: This seems fixed. There are anyway cases where doing the snapping with the node tool (whitin the same layer or to oth... Giovanni Manghi
02:50 PM Bug report #15806 (Closed): snap 3D does not work when editing: This seems fixed. There are anyway cases where doing the snapping with the node tool (whitin the same layer or to oth... Giovanni Manghi
02:50 PM Bug report #15806 (Closed): snap 3D does not work when editing: This seems fixed. There are anyway cases where doing the snapping with the node tool (whitin the same layer or to oth... Giovanni Manghi
02:50 PM Bug report #15806 (Closed): snap 3D does not work when editing: This seems fixed. There are anyway cases where doing the snapping with the node tool (whitin the same layer or to oth... Giovanni Manghi
02:50 PM Bug report #15806 (Closed): snap 3D does not work when editing: This seems fixed. There are anyway cases where doing the snapping with the node tool (whitin the same layer or to oth... Giovanni Manghi
02:46 PM Bug report #17207 (Closed): Two close buttons in expression editor: Applied in changeset commit:qgis|d1a9d3f1cf85f546cf51a9e85eda3a06ccbee460. Harrissou Santanna
02:46 PM Bug report #17207 (Closed): Two close buttons in expression editor: Applied in changeset commit:qgis|d1a9d3f1cf85f546cf51a9e85eda3a06ccbee460. Harrissou Santanna
02:37 PM Bug report #17240: When a node on the end of a path is selected and dragged, the whole line moves...: Not sure about this one at the moment. It was definitely happening yesterday when I was trying to edit some data, but... Patrick Dunford
01:50 PM Bug report #17240: When a node on the end of a path is selected and dragged, the whole line moves...: Also can't confirm. Giovanni Manghi
12:38 PM Bug report #17240: When a node on the end of a path is selected and dragged, the whole line moves...: I can't reproduce using commit:58f64bb4 on Win 10 Harrissou Santanna
10:40 AM Bug report #17240: When a node on the end of a path is selected and dragged, the whole line moves...: Just started a thread on the developers list Patrick Dunford
10:39 AM Bug report #17240: When a node on the end of a path is selected and dragged, the whole line moves...: I agree with Patrick. Selecting a single vertex, only that vertex should be moved, not the whole segment or even the ... Andreas Neumann
09:24 AM Bug report #17240 (Feedback): When a node on the end of a path is selected and dragged, the whole...: Same comment as #16836-8
I can understand your point but it could be very well a decision taken on purpose by who ... Giovanni Manghi
02:30 PM Bug report #17245 (Feedback): "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: Can you attach sample data? thanks. Giovanni Manghi
02:28 PM Bug report #17245 (Feedback): "orig_ogc_fid" field is added to filtered shapefiles in QGIS master: *new description:*
when filtering a shapefile in QGIS master a new field "orig_ogc_fid" is "added" to the table. Thi... Patrick Dunford
01:35 PM Bug report #15498: SQLite/GPKG database locked during canvas refresh: Luigi Pirelli wrote:
> Ok, it can be a regression, but IMHO the behaviour is much more correct in hti sway that allo... Giovanni Manghi
01:34 PM Bug report #15498: SQLite/GPKG database locked during canvas refresh: Seen also for GPKGs. Giovanni Manghi
12:49 PM Bug report #15498: SQLite/GPKG database locked during canvas refresh: Ok, it can be a regression, but IMHO the behaviour is correct in this way respect allowing to write during rendering.... Luigi Pirelli
10:50 AM Bug report #17244 (Open): New node tool snapping index out of sync for transaction groups (and tr...: Hi,
This is something that happened in the past I guess.
When playing with new node tool with database updating... Regis Haubourg
09:57 AM Bug report #17161 (Closed): Processing: zonal stats python error: Applied in changeset commit:qgis|f14502e441173dbb604178421549bfe5a0bb59ae. Alexander Bruy
09:57 AM Bug report #17161 (Closed): Processing: zonal stats python error: Applied in changeset commit:qgis|f14502e441173dbb604178421549bfe5a0bb59ae. Alexander Bruy
09:29 AM Bug report #17242: QGIS 3 is storing cache in windows roaming profile?: I agree that this a big problem for Windows users with roaming profiles (such as most gov organizations, companies, e... Andreas Neumann
08:46 AM Bug report #17242 (Closed): QGIS 3 is storing cache in windows roaming profile?: I've noticed some problems due to my windows roaming profile size recently.
It's not only QGIS 3 fault but I would... Arnaud Poncet-Montanges
04:00 AM Feature request #17241 (Open): use a selection as input for a Query Builder: I would like to be able to use my current selection to create a filter I can use in query builder to display only the... Mike Cusi

2017-10-03

12:18 AM Bug report #17240 (Closed): When a node on the end of a path is selected and dragged, the whole l...: This is not very intuitive with the new editing system. If my line has a node on the end of it, and I put the mouse o... Patrick Dunford
09:57 PM Bug report #17239 (Closed): Reported map scale representative fraction is incorrect: I first noticed this when trying to match up screenshots taken off of Google Maps, OpenStreetMap, and Mapzen with scr... Nathaniel V. Kelso
08:06 PM Bug report #17203 (Closed): v.dissolve is "reclassifying" attributes after dissolve: Giovanni Manghi
08:05 PM Bug report #17203: v.dissolve is "reclassifying" attributes after dissolve: Giovanni Manghi wrote:
> Can you attached the data?
> You did the operation within the GRASS plugin or in the Proce... Sarah Popov
05:58 PM Bug report #16427 (Closed): WMTS rendering problems in 2.18 and Master: Applied in changeset commit:qgis|d102404b5e6796727c0ae0c983cf016ab33ff27a. Anonymous
05:58 PM Bug report #16427 (Closed): WMTS rendering problems in 2.18 and Master: Applied in changeset commit:qgis|d102404b5e6796727c0ae0c983cf016ab33ff27a. Anonymous
03:31 PM Bug report #16427: WMTS rendering problems in 2.18 and Master: For master: https://github.com/qgis/QGIS/pull/5289
Needs backporting to 2.18 Alessandro Pasotti
01:45 PM Bug report #16427: WMTS rendering problems in 2.18 and Master: @Tudor: just to remove one possible cause, would you be able to test this by temporarily disabling HTTPS?
The getca... Alessandro Pasotti
05:43 PM Bug report #16296: Windows: Cannot use anymore d&d in DB Manager to import a layer from Spatialit...: PR https://github.com/qgis/QGIS/pull/5290 Luigi Pirelli
04:54 PM Bug report #16296: Windows: Cannot use anymore d&d in DB Manager to import a layer from Spatialit...: preparing PR Luigi Pirelli
03:43 PM Bug report #17210: Can crash gdal raster calculator by using a layer that was newly created and t...: Thanks Alex! Giovanni Manghi
03:12 PM Bug report #17210 (Closed): Can crash gdal raster calculator by using a layer that was newly crea...: Applied in changeset commit:qgis|13061251e104c38c066a85ad778420c91711f173. Alexander Bruy
03:12 PM Bug report #17210 (Closed): Can crash gdal raster calculator by using a layer that was newly crea...: Applied in changeset commit:qgis|13061251e104c38c066a85ad778420c91711f173. Alexander Bruy
02:42 PM Bug report #16836: A lot harder now to insert new nodes into lines and reshape lines in 7d67b02 t...: Patrick Dunford wrote:
> I am looking at it now but it will take some time to evaluate all the differences. But, thi... Giovanni Manghi
10:13 AM Bug report #16836: A lot harder now to insert new nodes into lines and reshape lines in 7d67b02 t...: I am looking at it now but it will take some time to evaluate all the differences. But, this is not just some kneejer... Patrick Dunford
02:40 PM Bug report #17235: Qgis crash on loading 1000 layer project [60fd763] on Xubuntu Artful: Patrick Dunford wrote:
> I still see invalid layer errors loading layers on some systems, even on Windows rom time t... Giovanni Manghi
09:42 AM Bug report #17235: Qgis crash on loading 1000 layer project [60fd763] on Xubuntu Artful: I still see invalid layer errors loading layers on some systems, even on Windows rom time to time. I know that there ... Patrick Dunford
09:18 AM Bug report #17235 (Feedback): Qgis crash on loading 1000 layer project [60fd763] on Xubuntu Artful: Patrick Dunford wrote:
> Sure :) this is the only unpatched system I have now
what does this means? modifying tha... Giovanni Manghi
08:49 AM Bug report #17235 (Open): Qgis crash on loading 1000 layer project [60fd763] on Xubuntu Artful: Sure :) this is the only unpatched system I have now Patrick Dunford
08:43 AM Bug report #17235 (Feedback): Qgis crash on loading 1000 layer project [60fd763] on Xubuntu Artful: wasn't the issue already discussed in #16049-17 along with a solution? Giovanni Manghi
08:25 AM Bug report #17235 (Closed): Qgis crash on loading 1000 layer project [60fd763] on Xubuntu Artful: This project has about 900 raster layers and the rest are shapefiles. It is actively developed at present using older... Patrick Dunford
02:29 PM Bug report #15658 (Closed): map tips does not show images correctly anymore... on Linux: Giovanni Manghi
01:38 PM Bug report #15658 (Feedback): map tips does not show images correctly anymore... on Linux: Works fine on all systems with strict HTML... Alexander Bruy
02:29 PM Bug report #14884 (Closed): Default layer style from PostGIS 'layer_style' table not applied at l...: Giovanni Manghi
11:28 AM Bug report #14884: Default layer style from PostGIS 'layer_style' table not applied at login: OK, will look at writing a macro to do this. Many thanks for clarifying this Harrissou, please close this ticket. Bruce Steedman
11:25 AM Bug report #14884: Default layer style from PostGIS 'layer_style' table not applied at login: > My current understanding is that a layer's default style should be applied when a project is opened, is that wrong?... Harrissou Santanna
11:02 AM Bug report #14884: Default layer style from PostGIS 'layer_style' table not applied at login: So perhaps I am misunderstanding the significance of the 'useasdefault' flag. How does setting this flag in the layer... Bruce Steedman
10:48 AM Bug report #14884: Default layer style from PostGIS 'layer_style' table not applied at login: Bruce Steedman wrote:
> Thanks for looking at this Giovanni
>
> Yes. The docs (link below) say: "When loading a ... Harrissou Santanna
02:27 PM Bug report #16195 (Closed): Problem running GRASS7 under QGIS master: Giovanni Manghi
01:34 PM Bug report #16195: Problem running GRASS7 under QGIS master: IMHO this should be closed, as Processing refactoring is not completed and GRASS now disabled Alexander Bruy
02:26 PM Bug report #16421 (Closed): SAGA and GRASS support broken in QGIS master: Giovanni Manghi
01:33 PM Bug report #16421: SAGA and GRASS support broken in QGIS master: IMHO this should be closed, as Processing refactoring still not completed and now SAGA and GRASS disabled. Alexander Bruy
01:42 PM Bug report #17237 (Open): Snap is offseted when the map is rotated: When you want snap a segment and the map is rotated, the highlighted segment have an offset (seems to be the higher t... Loïc BARTOLETTI
01:30 PM Feature request #5396 (Closed): Run algorithms in a different thread: Fixed in master Alexander Bruy
01:30 PM Feature request #5396 (Closed): Run algorithms in a different thread: Fixed in master Alexander Bruy
01:30 PM Feature request #5396 (Closed): Run algorithms in a different thread: Fixed in master Alexander Bruy
11:01 AM Bug report #17229 (Closed): Processing history doesn't handle postgres source tables correctly: Applied in changeset commit:qgis|b27382d0110b98782f4152fcd35c8eaf343e80e8. Nyall Dawson
11:01 AM Bug report #17229 (Closed): Processing history doesn't handle postgres source tables correctly: Applied in changeset commit:qgis|b27382d0110b98782f4152fcd35c8eaf343e80e8. Nyall Dawson
10:17 AM Bug report #16049: Opening a lot of JPG rasters all at once causes crash on Linux: Patrick Dunford wrote:
> "- compile yourself. This is not so hard in fact on Linux, "
> but there is no documentati... Harrissou Santanna
09:54 AM Bug report #17236 (Closed): Unable to edit layer while filter is in effect: Jürgen Fischer
09:54 AM Bug report #17236: Unable to edit layer while filter is in effect: Duplicate of #2951 Jürgen Fischer
09:43 AM Bug report #17236: Unable to edit layer while filter is in effect: Doesn't fit the test case shown in that ticket (which I obviously have read) Patrick Dunford
09:17 AM Bug report #17236 (Feedback): Unable to edit layer while filter is in effect: Why opening another ticket, wasn't #17124 enough? Giovanni Manghi
09:15 AM Bug report #17236 (Closed): Unable to edit layer while filter is in effect: If a layer has a filter applied, that layer cannot be put into edit mode.
see also #17124 Patrick Dunford
09:35 AM Bug report #17233: QGIS Main Window resizes itself upon saving the project to show the 'successfu...: I have a dual display system and the main windows is maximised on the first screen. Whenever I save the project it pu... Patrick Dunford
09:12 AM Bug report #17176 (Closed): Double WFS node in browser panel: Applied in changeset commit:qgis|8d6f4467a2baa6e8af7b5cab895a9d00c7c205ca. Nyall Dawson
09:12 AM Bug report #17176 (Closed): Double WFS node in browser panel: Applied in changeset commit:qgis|8d6f4467a2baa6e8af7b5cab895a9d00c7c205ca. Nyall Dawson

2017-10-02

11:14 PM Bug report #14884: Default layer style from PostGIS 'layer_style' table not applied at login: Thanks for looking at this Giovanni
Yes. The docs (link below) say: "When loading a layer from the database, if a... Bruce Steedman
06:35 PM Bug report #14884 (Feedback): Default layer style from PostGIS 'layer_style' table not applied at...: Giovanni Manghi
06:32 PM Bug report #14884: Default layer style from PostGIS 'layer_style' table not applied at login: Looking into various style loading issues here. Do you expect QGIS to override the style saved in your project by the... Regis Haubourg
10:28 PM Bug report #16296: Windows: Cannot use anymore d&d in DB Manager to import a layer from Spatialit...: Richard, I can't say, btw Browser is completely different code respect Db Manager. Try to notify this issue to Alessa... Luigi Pirelli
09:44 PM Bug report #16296: Windows: Cannot use anymore d&d in DB Manager to import a layer from Spatialit...: @luigi: not sure if it is related, but in current master the Drag&Drop in the browser (also) segfaults my QGIS.
Te... Richard Duivenvoorde
08:28 PM Bug report #16296: Windows: Cannot use anymore d&d in DB Manager to import a layer from Spatialit...: the log is different in my case:
..\..\..\..\..\src\core\qgsmimedatautils.cpp(111) : (QgsMimeDataUtils::decodeUriLis... Luigi Pirelli
08:23 PM Bug report #16296: Windows: Cannot use anymore d&d in DB Manager to import a layer from Spatialit...: From a log done by Giovanni Manghi the error is the QgsMimeDataUtils::decodeUriList method
..\..\..\..\..\src\core\q... Luigi Pirelli
04:49 PM Bug report #16296: Windows: Cannot use anymore d&d in DB Manager to import a layer from Spatialit...: Confirmed using qgis-rel-dev (2.18.13-8) on windows 10.
video attached.
the .sqlite used : https://www.gaia-gis... Francisco Raga
09:31 PM Bug report #15752: Degradation of rendering performances in MSSQL provider: New results: 2.18.13, 2.14.19, 2.8.9
!https://i.imgur.com/TPOq61c.png! Andre Jesus
07:01 PM Bug report #17234 (Closed): Saving style in postgres database can't be restored when connection u...: When saving a style to a database, using a service file, I can't restore it when opening a datasource.
When saving... Regis Haubourg
06:36 PM Bug report #16186 (Closed): Processing: Broken GRASS tools under Windows: Closing again because on a completely clean (OS and osgeo4w) install all seems to work as expected. There is somethin... Giovanni Manghi
06:36 PM Bug report #16186 (Closed): Processing: Broken GRASS tools under Windows: Closing again because on a completely clean (OS and osgeo4w) install all seems to work as expected. There is somethin... Giovanni Manghi
06:06 PM Bug report #17146: Processing: GRASS64 does not work in both latest 2.14 and 2.18: Brillant! thanks! Giovanni Manghi
02:44 PM Bug report #17146 (Closed): Processing: GRASS64 does not work in both latest 2.14 and 2.18: This is packaging issue. GRASS 6 needs GDAL 1.11 which is not installed by default and not listed as the package depe... Alexander Bruy
02:44 PM Bug report #17146 (Closed): Processing: GRASS64 does not work in both latest 2.14 and 2.18: This is packaging issue. GRASS 6 needs GDAL 1.11 which is not installed by default and not listed as the package depe... Alexander Bruy
05:18 PM Bug report #17224 (Closed): Smoothing (vigra) shown in processing but not working (osgeo4w packag...: removed here
https://github.com/qgis/QGIS/pull/5280 Giovanni Manghi
05:18 PM Bug report #17224 (Closed): Smoothing (vigra) shown in processing but not working (osgeo4w packag...: removed here
https://github.com/qgis/QGIS/pull/5280 Giovanni Manghi
08:10 AM Bug report #17224 (Closed): Smoothing (vigra) shown in processing but not working (osgeo4w packag...: Running QGIS from osgeo4w I tried to use the Saga processing algorithm "Smoothing (vigra)", and got the following:
... Alister Hood
04:08 PM Bug report #17143 (Closed): Cardinality cannot be changed in layer properties --> Fields tab --> ...: Yes - works fine now. Closing.
Thanks! Andreas Neumann
04:08 PM Bug report #17143 (Closed): Cardinality cannot be changed in layer properties --> Fields tab --> ...: Yes - works fine now. Closing.
Thanks! Andreas Neumann
03:57 PM Bug report #17233 (Closed): QGIS Main Window resizes itself upon saving the project to show the '...: In my current master, when I make the QGIS window rather small, if you load some data, and save the project, after th... Richard Duivenvoorde
03:37 PM Bug report #17232 (Closed): The rotation widget disappearwhen you change the anchor point is modi...: If you start to rotate an object and after you select a new anchor point (ctrl+click) the widget with angle rotation ... Loïc BARTOLETTI
03:31 PM Bug report #17227 (Open): Impossible to resize columns in Batch processing interface: Giovanni Manghi
02:28 PM Bug report #17227: Impossible to resize columns in Batch processing interface: I just give it a look: also the case in 2.14 and 2.18. Maybe it has always been this way...--> feature request or bug... Harrissou Santanna
02:17 PM Bug report #17227 (Feedback): Impossible to resize columns in Batch processing interface: only master? Giovanni Manghi
01:59 PM Bug report #17227 (Closed): Impossible to resize columns in Batch processing interface: Launch a processing tool
switch to the batch processing interface
The columns in the widget can't be manually resiz... Harrissou Santanna
03:20 PM Bug report #17230: QGIS Crash after cutting features: OK. Will do that now, and give feedback here what has happened.
Thank you a lot!! Vida Krstulovic
03:18 PM Bug report #17230: QGIS Crash after cutting features: Vida Krstulovic wrote:
> Will try to do those two things..
> > with qgis 2.18
> > removing any 3rd party plugin
... Giovanni Manghi
03:16 PM Bug report #17230: QGIS Crash after cutting features: Will try to do those two things..
> with qgis 2.18
> removing any 3rd party plugin
> Also:
>
> *attach ... Vida Krstulovic
03:07 PM Bug report #17230 (Feedback): QGIS Crash after cutting features: Try:
with qgis 2.18
removing any 3rd party plugin
Also:
attach the data
is the editing tool that causes... Giovanni Manghi
03:07 PM Bug report #17230 (Feedback): QGIS Crash after cutting features: Try:
with qgis 2.18
removing any 3rd party plugin
Also:
attach the data
is the editing tool that causes... Giovanni Manghi
03:04 PM Bug report #17230 (Closed): QGIS Crash after cutting features: Hi!
I have an issue with my qgis 2.14... I have a point layer I have converted to line layer using Point2one PlugIn,... Vida Krstulovic
03:17 PM Bug report #17231 (Closed): Processing help system expects wrong link: When hitting the Help button in a Processing tool dialog, the expected link doesn't follow the same structure than li... Harrissou Santanna
02:55 PM Bug report #16438 (Feedback): Categorized layer crashes when deselecting: Did you tried 2.18 (there are no more fixes for 2.14)?
Any kind of vector datasources?
Regardless of the project?... Giovanni Manghi
02:55 PM Bug report #16438 (Feedback): Categorized layer crashes when deselecting: Did you tried 2.18 (there are no more fixes for 2.14)?
Any kind of vector datasources?
Regardless of the project?... Giovanni Manghi
02:54 PM Bug report #16438 (Reopened): Categorized layer crashes when deselecting: -Error is present in 2.14.18, downloading 2.14.19... but should be the same as I see no entry in the changelog-
pl... Andre Jesus
02:44 PM Bug report #17229 (Closed): Processing history doesn't handle postgres source tables correctly: Follow-up #17162
After I ran a "Select by location" algorithm in Processing, I copied the command from the History d... Harrissou Santanna
02:07 PM Feature request #17228 (Closed): switch between simple and batch process dialogs, back and forth: Currently, when you hit the "Run as Batch Process..." button in a Processing tool dialog, you switch to the Batch pro... Harrissou Santanna
01:53 PM Bug report #16657: date edit widget only shows current date whatever the real data is underneath: error is probably only located in setting the correct format string here:
https://github.com/qgis/qgis/blob/release-... Luigi Pirelli
12:55 PM Bug report #17226: Geopackage "Select Vector Layers to Add" dialogue has wrong nr of features: Same issue appears on Linux Andreas Neumann
12:41 PM Bug report #17226: Geopackage "Select Vector Layers to Add" dialogue has wrong nr of features: screenshot demonstrating the issue. Andreas Neumann
11:03 AM Bug report #17226 (Closed): Geopackage "Select Vector Layers to Add" dialogue has wrong nr of fea...: If one drags and drops a geopackage into QGIS master, the column labeled "Number of features" in the "Select Vector L... Andreas Neumann
12:34 PM Bug report #17145 (Closed): Processing: GRASS7 nviz does not work: Applied in changeset commit:qgis|cef2f89f45bc6b806e382c129a8568717d32c40c. Alexander Bruy
12:34 PM Bug report #17145 (Closed): Processing: GRASS7 nviz does not work: Applied in changeset commit:qgis|cef2f89f45bc6b806e382c129a8568717d32c40c. Alexander Bruy
12:34 PM Feature request #17211 (Closed): remove/hide the "select by location" tool from modeller: Applied in changeset commit:qgis|57829752ecf5722a3fbd753e2c8ce645e8b6dddc. Alexander Bruy
12:34 PM Feature request #17211 (Closed): remove/hide the "select by location" tool from modeller: Applied in changeset commit:qgis|57829752ecf5722a3fbd753e2c8ce645e8b6dddc. Alexander Bruy
12:34 PM Bug report #16889 (Closed): Actions menu missing in Identify feature form in QGIS 3: Applied in changeset commit:qgis|11eb9cfe57e95b722ccee49a93d25e521dbc4853.
Thanks anonymous guy! (is that you Matt... Anonymous
12:34 PM Bug report #16889 (Closed): Actions menu missing in Identify feature form in QGIS 3: Applied in changeset commit:qgis|11eb9cfe57e95b722ccee49a93d25e521dbc4853.
Thanks anonymous guy! (is that you Matt... Anonymous
10:53 AM Bug report #17029 (Closed): Labels settings inside style dock does not update accordingly to sele...: Fixed in commit 471204dd4de2225979a1846209bfcb39700aeeba. Mathieu Pellerin - nIRV
10:53 AM Bug report #17029 (Closed): Labels settings inside style dock does not update accordingly to sele...: Fixed in commit 471204dd4de2225979a1846209bfcb39700aeeba. Mathieu Pellerin - nIRV
10:40 AM Bug report #17136 (Closed): Processing error: "Could not open SAGA algorithm: RiverGridGeneration...: Already fixed Alexander Bruy
10:40 AM Bug report #17136 (Closed): Processing error: "Could not open SAGA algorithm: RiverGridGeneration...: Already fixed Alexander Bruy
10:14 AM Feature request #17225 (Closed): Improvement of Map tip translation: In the German locale, "Map tips" is translated to "Kartenhinweise".
But in layer properties, Display section, the ... Andre Joost
09:56 AM Bug report #16882: feature count refreshed after each edit and in the form view of the attribute ...: Actually, the annoying thing is not that the entity count is updated but the fact that the attribute table goes into ... Arnaud Poncet-Montanges
09:39 AM Bug report #16026 (Feedback): Value map entries aren't copied with table style (2.99 110ffe2): Still valid in 2.18? Giovanni Manghi
09:39 AM Bug report #16026 (Feedback): Value map entries aren't copied with table style (2.99 110ffe2): Still valid in 2.18? Giovanni Manghi
06:31 AM Bug report #16026: Value map entries aren't copied with table style (2.99 110ffe2): Steps for testing:
# Save a copy of a table
# Copy the style from the original table to the new table
# When you o... Patrick Dunford
06:26 AM Bug report #16026: Value map entries aren't copied with table style (2.99 110ffe2): This issue seems to be resolved in master 2.99 313ec55 Patrick Dunford
09:09 AM Feature request #17219: Better description of bands: http://www.faunalia.eu/~paolo/grib.zip
Thanks.
BTW: I do not know whether this is a general issue, but the projecti... Paolo Cavallini

2017-10-01

01:24 AM Feature request #17219 (Feedback): Better description of bands: Can you share one of these files? Nyall Dawson
03:20 PM Bug report #16407 (Closed): Expression builder: Rename simplify and simplify_vw: We are following PostgreSQL/PostGIS functions convention naming which use st_simplify and st_simplifyvw
Note: A PR w... Harrissou Santanna
03:20 PM Bug report #16407 (Closed): Expression builder: Rename simplify and simplify_vw: We are following PostgreSQL/PostGIS functions convention naming which use st_simplify and st_simplifyvw
Note: A PR w... Harrissou Santanna
03:20 PM Bug report #16407 (Closed): Expression builder: Rename simplify and simplify_vw: We are following PostgreSQL/PostGIS functions convention naming which use st_simplify and st_simplifyvw
Note: A PR w... Harrissou Santanna
03:20 PM Bug report #16407 (Closed): Expression builder: Rename simplify and simplify_vw: We are following PostgreSQL/PostGIS functions convention naming which use st_simplify and st_simplifyvw
Note: A PR w... Harrissou Santanna
02:50 PM Bug report #17221 (Closed): imports delimited text: the decimal separator (,) is not recognized: Giovanni Manghi
12:04 PM Bug report #17221: imports delimited text: the decimal separator (,) is not recognized: Giovanni Manghi wrote:
> > as described in the description, the problem does not exist in QGIS 2.18
>
> As Richar... salvatore fiandaca
12:02 PM Bug report #17221: imports delimited text: the decimal separator (,) is not recognized: Richard Duivenvoorde wrote:
> See screenshot, with me both csv files are being correctly opened both in master and i... salvatore fiandaca
11:27 AM Bug report #17221: imports delimited text: the decimal separator (,) is not recognized: See screenshot, with me both csv files are being correctly opened both in master and in 2.18 both on Linux and Window... Richard Duivenvoorde
11:22 AM Bug report #17221 (Feedback): imports delimited text: the decimal separator (,) is not recognized: > as described in the description, the problem does not exist in QGIS 2.18
As Richard said using the option "dec... Giovanni Manghi
01:55 PM Bug report #17220: Metadata for a geopackage layer are not saved: The metadata panel is still a work in progress.
There is still a lot to do about saving metadata. It's work packag... Etienne Trimaille
12:01 PM Bug report #8073: Crash when loading PostGIS raster: I think that the situation is pretty much clear: postgis rasters are not (still?) not well supported. Giovanni Manghi
12:00 PM Bug report #15599 (Feedback): In spatial views, QGIS shows only 100 rows in attribute-table, when...: Does it happens only when the query involved has a join in it?
Can you add the exact steps (queries and where you is... Giovanni Manghi
12:00 PM Bug report #15599 (Feedback): In spatial views, QGIS shows only 100 rows in attribute-table, when...: Does it happens only when the query involved has a join in it?
Can you add the exact steps (queries and where you is... Giovanni Manghi
11:04 AM Bug report #17207: Two close buttons in expression editor: https://github.com/qgis/QGIS/pull/5273 Richard Duivenvoorde
09:39 AM Bug report #15600: Selecting features feature in spatial views and virtual layers leads to wrong ...: Worked as expected for SL views (virtual layer untested as they were not available) until 2.8.* Giovanni Manghi
09:39 AM Bug report #15600: Selecting features feature in spatial views and virtual layers leads to wrong ...: Worked as expected for SL views (virtual layer untested as they were not available) until 2.8.* Giovanni Manghi
09:39 AM Bug report #15600: Selecting features feature in spatial views and virtual layers leads to wrong ...: Worked as expected for SL views (virtual layer untested as they were not available) until 2.8.* Giovanni Manghi
09:22 AM Bug report #17201 (Open): QGIS master crashes when trying to expand a spatiaLite layer in the DB ...: Giovanni Manghi

2017-09-30

12:40 AM Bug report #15599: In spatial views, QGIS shows only 100 rows in attribute-table, when view has m...: Behavior is also in master and 2.18.13.
The View "parent_child_object_equal_101", is generated with dbmanager. In ... Gerhard Spieles
12:40 AM Bug report #15599: In spatial views, QGIS shows only 100 rows in attribute-table, when view has m...: Behavior is also in master and 2.18.13.
The View "parent_child_object_equal_101", is generated with dbmanager. In ... Gerhard Spieles
12:40 AM Bug report #15599: In spatial views, QGIS shows only 100 rows in attribute-table, when view has m...: Behavior is also in master and 2.18.13.
The View "parent_child_object_equal_101", is generated with dbmanager. In ... Gerhard Spieles
12:40 AM Bug report #15599: In spatial views, QGIS shows only 100 rows in attribute-table, when view has m...: Behavior is also in master and 2.18.13.
The View "parent_child_object_equal_101", is generated with dbmanager. In ... Gerhard Spieles
12:40 AM Bug report #15599: In spatial views, QGIS shows only 100 rows in attribute-table, when view has m...: Behavior is also in master and 2.18.13.
The View "parent_child_object_equal_101", is generated with dbmanager. In ... Gerhard Spieles
12:40 AM Bug report #15599: In spatial views, QGIS shows only 100 rows in attribute-table, when view has m...: Behavior is also in master and 2.18.13.
The View "parent_child_object_equal_101", is generated with dbmanager. In ... Gerhard Spieles
11:27 PM Bug report #17201: QGIS master crashes when trying to expand a spatiaLite layer in the DB manager: Same Problem
Database ist attached Gerhard Spieles
09:16 PM Bug report #17223 (Feedback): Error in Processing configuration when using QT5 themes: I can't confirm on Ubuntu 16.04 and Windows. Giovanni Manghi
04:53 PM Bug report #17223 (Closed): Error in Processing configuration when using QT5 themes: I get the next error when try configurate the Processing module in Options:... Samuel Fernando Mesa Giraldo
08:43 PM Bug report #17212 (Closed): Attribute tables in print composer not updating: Giovanni Manghi
08:28 PM Bug report #8073: Crash when loading PostGIS raster: I have a similar situation as described in #16754 (duplicate) and was also able to replicate the issue there. My QGIS... Martin Gutwin
08:06 PM Bug report #17221: imports delimited text: the decimal separator (,) is not recognized: Richard Duivenvoorde wrote:
> Ok, did some more testing on a Windows laptop with nl_NL locale, and both your files w... salvatore fiandaca
01:33 PM Bug report #17221: imports delimited text: the decimal separator (,) is not recognized: Ok, did some more testing on a Windows laptop with nl_NL locale, and both your files work there too (as long as you c... Richard Duivenvoorde
11:20 AM Bug report #17187: Attribute Table refresh issue: It's a general issue. Same unexpected behavior with all the vector data formats. Geo Dev

« Previous

Also available in: Atom

QGIS » QGIS Application

Activity

Activity

2017-10-29

2017-10-28

2017-10-27

2017-10-26

2017-10-25

2017-10-24

2017-10-23

2017-10-22

2017-10-21

2017-10-20

2017-10-19

2017-10-18

2017-10-17

2017-10-16

2017-10-15

2017-10-14

2017-10-13

2017-10-12

2017-10-11

2017-10-10

2017-10-09

2017-10-08

2017-10-07

2017-10-06

2017-10-05

2017-10-04

2017-10-03

2017-10-02

2017-10-01

2017-09-30