Activity
From 2017-06-09 to 2017-07-08
2017-07-08
-
11:59 PM Bug report #16817 (Closed): Problem with Points layer from table in QGIS 2.18.10
- When I try to use the "Points layer from table" tool in QGIS 2.18.10, it doesn't work if I try to save the result in ...
-
- I´ve been trying to clip a raster with a mask layer using the clipper tool, but I get the message "Output driver `GMT...
-
03:06 PM Bug report #16815 (Closed): Nightly build stopped updating
- In the web page at this location http://qgis.org/en/site/forusers/alldownloads.html
I have followed the instructions... -
02:01 PM Bug report #16812 (Closed): Saving GeoJson deletes NULL attributes if QGIS is compiled against GD...
- Applied in changeset commit:qgis|7d67b02ae461adf5bbf8cc753ea61a64ec125bbc.
-
- Applied in changeset commit:qgis|7d67b02ae461adf5bbf8cc753ea61a64ec125bbc.
-
12:46 PM Bug report #16812: Saving GeoJson deletes NULL attributes if QGIS is compiled against GDAL 2.2
- I'm reluctant to tag this as "regression" because technically is not a QGIS issue, point is that QGIS users that will...
-
- I'm reluctant to tag this as "regression" because technically is not a QGIS issue, point is that QGIS users that will...
-
- I'm reluctant to tag this as "regression" because technically is not a QGIS issue, point is that QGIS users that will...
-
- I'm reluctant to tag this as "regression" because technically is not a QGIS issue, point is that QGIS users that will...
-
01:40 PM Bug report #16814 (Feedback): Opening Browser show No such signal warnings (errors?) in Qt Log Me...
- See attachment.
Upon first opening of the Data Source Manager, a lot of 'No such signal' messages show up in the L... -
In the browser you can either choose to only Check the extension of files, OR to Check the file contents to determi...-
11:16 AM Bug report #16810: QGIS crash when digitizing in a memory layer and not saving the layer
- Thanks Richard and Nathan!
If you are able to provide a trace on linux, that would be great. Also for reference / ... -
11:12 AM Bug report #16790: QGIS fails to start on Ubuntu 16.10
- Can you run apt-cache policy libqhull7 ?
Version 2015.2-1 should be the current release.
2017-07-07
-
07:45 PM Bug report #16812 (Closed): Saving GeoJson deletes NULL attributes if QGIS is compiled against GD...
- As described in https://github.com/UCDavisLibrary/ava/issues/270, Saving Geojson removes any attributes that have nul...
-
- Richard Duivenvoorde wrote:
> Yes, with me here only on master (tested 2.18.10, and all goes well there).
then *i... -
- Richard Duivenvoorde wrote:
> Yes, with me here only on master (tested 2.18.10, and all goes well there).
then *i... -
- Richard Duivenvoorde wrote:
> Yes, with me here only on master (tested 2.18.10, and all goes well there).
then *i... -
- Richard Duivenvoorde wrote:
> Yes, with me here only on master (tested 2.18.10, and all goes well there).
then *i... -
- Yes, with me here only on master (tested 2.18.10, and all goes well there).
So: no, not a regression.
Have a lo... -
- Hi Richard! Only on master? Regression?
-
- QGIS crashes both on Windows and Linux master when you have a non saved memory layer and try to either stop QGIS or c...
-
04:09 PM Bug report #16811: Since 2.18.10 "save as GPX" not recognising GPX_USE_EXTENSIONS setting
- Save as GPX, not GPS...
-
- I've been exporting my vector layers to GPX format succesfully until 2.18.10, now I get the following error when tryi...
-
- Fixed in commit:c89ffe46c5f7404fc4a0fa9b48f6508e89d9e07f and commit:162063be1b71e677b065349ad437036b6268e07d
-
- Fixed in commit:c89ffe46c5f7404fc4a0fa9b48f6508e89d9e07f and commit:162063be1b71e677b065349ad437036b6268e07d
-
We have some data in a (bigggg) Oracle database which are actually being digitized using Microstation tools.
Loo...-
- http://plugins.qgis.org/plugins/autoSaver/ ?
-
- http://plugins.qgis.org/plugins/autoSaver/ ?
-
03:13 PM Feature request #16808 (Open): Make autosaver plugin a core feature
- Please add ability to setup autosaving current project.
This is much needed since QGIS isn't perfectly stable, like ... -
02:39 PM Feature request #16804: EXP DIALOG AND (RANDOM) COLOUR_RGB
- f ffierm wrote:
> First of all, thank You for the answer. If I follow your tips and I use the "single simbol" option... -
- f ffierm wrote:
> First of all, thank You for the answer. If I follow your tips and I use the "single simbol" option... -
09:53 AM Feature request #16804: EXP DIALOG AND (RANDOM) COLOUR_RGB
- First of all, thank You for the answer. If I follow your tips and I use the "single simbol" option the code I wrote w...
-
- See this thread:
https://lists.osgeo.org/pipermail/qgis-developer/2017-July/049234.html
In short:
Even when s... -
- See this thread:
https://lists.osgeo.org/pipermail/qgis-developer/2017-July/049234.html
According to Even the log... -
- Closing for lack of feedback.
-
- Closing for lack of feedback.
-
- Tested here too, both on Debian Testing and Windows7 both master version.
With shp, gpkg and memory layers tested,... -
09:36 AM Bug report #16805 (Closed): Corrupting SQL Server tables when using drag and drop in QGIS browser
- Hi,
We have found a dangerous bug in QGIS in the Browser Panel - under a SQL Server Connection. Dragging a file an... -
09:02 AM Bug report #16800 (Closed): Split vector layer cause segmentation fault
- Applied in changeset commit:qgis|e0915103fde49a75fbe7ccb022008ef556d64d89.
-
- Applied in changeset commit:qgis|e0915103fde49a75fbe7ccb022008ef556d64d89.
-
- Fixed by commit:3a31f54b15aa66476c548cd44d22fd792ab04d54
-
- Fixed by commit:3a31f54b15aa66476c548cd44d22fd792ab04d54
-
- My fix was only for the 3.0 branch - it relies on a feature not available in the Qt4 builds. It'd need to be reworked...
-
07:35 AM Bug report #9523: openProject macro won't load when enable Macros setting set to Ask
- Hi Nyall,
I think a fix for 2.18 would be useful. 2.18 will be around for at least 2 years until people have all t...
2017-07-06
-
- Andreas - is this a new issue? Or are you reopening because you want a fix in 2.18?
-
- That's not correct use of categorised renderer.
Categorize on the attribute "layer" and then set the color manuall... -
- That's not correct use of categorised renderer.
Categorize on the attribute "layer" and then set the color manuall... -
- Hi,
after loading a vector data, polygon, I would to display a thematic map using: VECTOR LAYER - PROPERTIES - STY... -
09:22 PM Feature request #16793: Align map objects to true north in map composer
- Giovanni Manghi wrote:
> aren't map objects north oriented by default?
As far as I know, they are oriented to nor... -
- aren't map objects north oriented by default?
-
- aren't map objects north oriented by default?
-
- Giovanni Manghi wrote:
> so is your request about the map (print) composer or the QGIS canvas?
It is all about th... -
- Alexander Mason wrote:
> Not sure I understand what's contradictory, but I'll try to explain better.
>
> With the... -
- Not sure I understand what's contradictory, but I'll try to explain better.
With the map composer open,
When yo... -
- In the subject you meant to say "map canvas" instead of "map composer"? Subject and description are contradictory.
-
-
- This was an accident/mistake by Matthias. The feature request issue "duplicate records" here has nothing to do with t...
-
04:06 PM Bug report #16803: Segmentation fault with 'Create raster icons' on and loading a WMS
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > was an issue on 2.14.*?
>
> I answer myself, no.
Confirme... -
- Giovanni Manghi wrote:
> was an issue on 2.14.*?
I answer myself, no. -
- was an issue on 2.14.*?
-
- I'm getting a Segmentation fault, both on Windows (OSGeo4W and Standalone) and Linux (from QGIS repository and self c...
-
03:30 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....
- Peter Meier wrote:
> Using the qgis_mapserv.fcgi.exe through Apache 2.4 on Windows. WMS GetPrint call works on all m... -
- Right, I forgot of that scenario.
-
- Right, I forgot of that scenario.
-
- Right, I forgot of that scenario.
-
- Confirmed also on Linux.
-
- Confirmed also on Linux.
-
- Confirmed also on Linux.
-
- Confirmed also on Linux.
-
- Confirmed also on Linux.
-
- Confirmed also on Linux.
-
- Confirmed also on Linux.
-
- Installed as described here?
http://www.qgis.org/en/site/forusers/alldownloads.html#opensuse -
- Installed as described here?
http://www.qgis.org/en/site/forusers/alldownloads.html#opensuse -
- Running in gdb:...
-
Tested here on:
- Debian testing fresh compiled of 6t july 2017
- Windows 2.99 osgeo4w64
Both crash when I add...-
10:49 AM Bug report #16428: Processing UI forms not rendering properly
- I can't find the issue here.
Tried to use pyuic without success.
Tried to remove QgsScrollArea from custom widgets ... -
10:17 AM Bug report #14589: GetCapabilities gets cached in a confusing way (even when QGIS cache is set to 0)
- Faced again with this issue in 2.18.10 with the same behaviour as I described year ago in #14396-4
-
09:26 AM Bug report #16666: New unified add button: file selector sometimes opens behind the Data Source M...
- I also get the same thing on Ubuntu 17.10 (Unity desktop) but it also affects other things, not only the Data Source ...
-
09:03 AM Bug report #16801 (Closed): [Processing] Dissolve with unique field cause segmentation fault
- Tried with different dataset. When a unique field is entered to dissolve the layer I get a segmentation fault.
No pr... -
- Tested with different dataset.
The algorithm "Split vector layer" does not care about the directory chosen for the ... -
08:11 AM Bug report #16799 (Closed): qgis server installation and configuration - End of script output bef...
- I installed (on Windows 10 but also on windows 7 with exactly the same result) Apache/PHP with Stackbuilder,and then ...
-
06:53 AM Bug report #16777: GRASS plugin/Processing tools not loading QGIS 2.18.10 installer (both standal...
- I'm experiencing the same problem. I do not use the grass-toolbar, hence I use processing.runalg("grass:v.voronoi", p...
-
- This would need to be addressed in the GDAL library which QGIS uses for reading/writing to GeoJSON files. It currentl...
-
- This would need to be addressed in the GDAL library which QGIS uses for reading/writing to GeoJSON files. It currentl...
2017-07-05
-
- Not sure if this is a regression or something which was never supported, but virtual layers always return the same fe...
-
12:59 AM Bug report #16797 (Rejected): Overwriting GeoJOSN file is confirmed only via dialog "OK"
- I will overwrite ESRI SHP files, QGIS talk me dialog "overwrite" "append" "cancel". :)
I will overwrite GeoJSON file... -
- Lennert De Feyter wrote:
> Ah. Sorry for the useless bug report. It does indeed work if I install the ltr version ra... -
- Lennert De Feyter wrote:
> Ah. Sorry for the useless bug report. It does indeed work if I install the ltr version ra... -
12:36 AM Bug report #16791: Saga no longer allows you to set folder
- Ah. Sorry for the useless bug report. It does indeed work if I install the ltr version rather than the normal one. It...
-
- This is by design. Since 2.18.10 we started to only support SAGA LTR, that on standalone Windows installer is shipped...
-
- The print composer never exported geopdf or geotiff. You can export as tif with world file, so this is not a bug but ...
-
- The print composer never exported geopdf or geotiff. You can export as tif with world file, so this is not a bug but ...
-
08:49 PM Feature request #16796 (Closed): export geopdf and geotiff form print composer
- Trying to export first to a PDF from Print Composer and there is no coordinate reference system in the output.
The... -
-
- Tested in 2.18.10 and looks like the tools are now working as expected =)
-
07:00 PM Bug report #16795 (Open): [Composer Legend] Symbology of layer always follows the map canvas and ...
- Create two different styles for a single layer.
Now in print composer, do a layout and add the layer to a composer l... -
06:51 PM Bug report #16770 (Closed): copy/paste/save features from one layer to another of the same time ...
- Applied in changeset commit:qgis|d19ed1c627ac43c7a00221f5cb637b8b049f6681.
-
- Applied in changeset commit:qgis|d19ed1c627ac43c7a00221f5cb637b8b049f6681.
-
09:57 AM Bug report #16770: copy/paste/save features from one layer to another of the same time broke in ...
- I can confirm the issue.
I have installed QGIS 2.18.10 on Windows 10 machine.
Objects which I was copying were l... -
- Applied in changeset commit:qgis|d19ed1c627ac43c7a00221f5cb637b8b049f6681.
-
- Applied in changeset commit:qgis|d19ed1c627ac43c7a00221f5cb637b8b049f6681.
-
- likely duplicated of #16758
-
01:37 PM Bug report #16792: Fails to handle multipart features as shapefile geometry type after merging
- The same error occurs with lines shapefiles even with two matching vertex (snapped)of two line features after use "me...
-
08:51 AM Bug report #16792 (Closed): Fails to handle multipart features as shapefile geometry type after m...
- Since the new patch to 2.18.10 QGIS seems to have problems with the Geometrytypes for (at least) Shapefiles.
Follo... -
06:18 PM Bug report #16794 (Closed): Crash when no value is entered in min or max fields in Singleband pse...
- When using the layer styling dock and I accidentally remove all values (including 0) in one of the min or max fields ...
-
- openProject macros run fine if set to "Always run", not after enabling with "Ask"
-
- Reopening this bug, because there is a regression in 2.18.10
Same behavior as stated. The macro does not run if en... -
- Reopening this bug, because there is a regression in 2.18.10
Same behavior as stated. The macro does not run if en... -
- Reopening this bug, because there is a regression in 2.18.10
Same behavior as stated. The macro does not run if en... -
04:43 PM Bug report #16787: Error when clicking button 'TEST' with for the rule "ELSE" in rule based renderer
- To reproduce :
# First rule :
> * rule name : 'Rule 1'
> * filter : $id <= 10
# Second rule :
> * rule name ... -
- Just tried an expression that contains "ELSE" (the function is "CASE", this is why you don't "find" it with the filte...
-
- Didier Genier wrote:
> Data's and style :
wihtout any issue here on both Ubuntu and Windows and qgis 2.18.10. I s... -
- Denis Rouzaud wrote:
> Yes Master.
> But why feedback? For me it's a serious blocker.
the status does not indic... -
- Yes Master.
But why feedback? For me it's a serious blocker. -
- does this affect only master/qgis3, correct?
-
12:42 PM Bug report #16785: Constraint prevent adding feature to spatialite layer with auto-increment pkey
- I agree.
-
- nope, but if it's the solution, it should be done automatically!
-
- Did you try to manually write something in the pkuid field? And check, if the field properties allow edition of the f...
-
- On my side, I can't validate the form, see the attached screenshot (apply is disabled).
-
- It is possible to add pkuid manualy (QGIS master on Windows 10). But, QGIS does not add it automatically, which is de...
-
- It is possible to add pkuid manualy (QGIS master on Windows 10). But, QGIS does not add it automatically, which is de...
-
- Attached a screencast of an installation where ti work as expected.
I would suggest to disable or remove any 3rd p... -
- Attached a screencast of an installation where ti work as expected.
I would suggest to disable or remove any 3rd p... -
03:43 PM Bug report #16789: Unable to deactivate tooltips on some installation
- I've tried again on 7 PCs (1 PC with Windows 7 and 6 PCs with Windows 10) and I still have the problem with all of th...
-
- Just tested on a clean Windows 7 testing VM, with a fresh 2.18.10 installation and it works as expected.
-
-
02:16 PM Bug report #16790: QGIS fails to start on Ubuntu 16.10
- Thanks Giovanni. I was really hoping that someone might be able to help by interpreting the error messages I got.
-
> I cannot update my OS.
then probably your best change to have a working qgis copy is to compile the code, is ...-
- Giovanni Manghi wrote:
> 16.10 is not among the supported versions
I think 16.10 was supported when I installed... -
- Chris Barrington-Leigh wrote:
> Andre Joost wrote:
> > QGIS 2.14.5 is outdated (though in the official ubuntu repo)... -
- Andre Joost wrote:
> QGIS 2.14.5 is outdated (though in the official ubuntu repo).
Actually, that version is the ... -
-
- QGIS 2.14.5 is outdated (though in the official ubuntu repo).
Try http://qgis.org/debian/ yakkety main instead to ... -
- likely to have caused also #16770
-
- This affects also 2.18.10
see #16784 and #16792 -
> Hi Regis,
> i understand that implementing is way harder than asking for changes. I have no profound programmin...-
- Ger CO wrote:
> Regis Haubourg wrote:
> > Ger CO wrote:
> > > Please address the issue, that currently all fields ... -
11:44 AM Feature request #13654: Enhancements to Dissolve
- Regis Haubourg wrote:
> Ger CO wrote:
> > Please address the issue, that currently all fields (not just the fields ... -
- In the map composer, items such as pictures can be rotated and aligned with both grid or true north.
Would it be ...
2017-07-04
-
- I have tried to remove my configuration folders and did a complete reinstall.
-
- Since 2.18.10-1 I can no longer get saga algorithms to run from QGIS. They no longer appear in the processing toolbar...
- 09:04 PM Bug report #11954 (Closed): Atlas doesn't consider map rotation when setting scale
- Applied in changeset commit:qgis|e03b5630a9c237be5f1ba0b88fd3c046e6987968.
- 09:04 PM Bug report #11954 (Closed): Atlas doesn't consider map rotation when setting scale
- Applied in changeset commit:qgis|e03b5630a9c237be5f1ba0b88fd3c046e6987968.
-
- On trying to launch QGIS (even after deleting/resetting my .qgis2 folder), I get the following (and no QGIS window):
... -
- and launching a second time, does QGIS start?
I have seen that before but I never reduced it to something easy to r... -
06:10 PM Bug report #16788: Cannot start qgis
- Deleting .qgis2 folder doesn't solve the problem, then I tried using CCleaner to clean up registry, then the problem ...
-
- Of course this is a local issue, as that installer for that qgis version works just fine. You should look for the sou...
-
- Of course this is a local issue, as that installer for that qgis version works just fine. You should look for the sou...
-
- Of course this is a local issue, as that installer for that qgis version works just fine. You should look for the sou...
-
- When I click Qgis Desktop 2.18.10 icon, qgis-bin.exe start running in Task Manager and used 15% CPU, but the loading ...
-
05:00 PM Bug report #16720: Pyspatialite in QGIS 3 crash
- Reproduced also on Linux with WITH_INTERNAL_PYSPATIALITE, not specific to Windows
-
- Reproduced also on Linux with WITH_INTERNAL_PYSPATIALITE, not specific to Windows
-
- Reproduced also on Linux with WITH_INTERNAL_PYSPATIALITE, not specific to Windows
-
- When you activate the tooltips, with the tooltips button, then it's impossible to deactivate the tooltips by clicking...
-
- Checked in QGis 2.14.16: no more problems. The bug seems to be corrected.
-
- Ger CO wrote:
> Please address the issue, that currently all fields (not just the fields used as dissolve fields) ar... -
11:39 AM Bug report #16786 (Closed): SAGA raster calculator not working in QGIS 2.18.10
- Applied in changeset commit:qgis|74042a2dc061aba0f8c5ecc15efa111153c97bb0.
-
- Applied in changeset commit:qgis|74042a2dc061aba0f8c5ecc15efa111153c97bb0.
-
- ...
-
- ...
-
- When I try to use the SAGA raster calculator through the processing toolbox and click the Run button nothing happens....
-
10:59 AM Bug report #8760: Custom Form from .ui File crashes QGIS on Ubuntu
- Hugo Mercier wrote:
> Do you know why 2.18 is linked to the 2.14 version of custom widgets ?
There is no linking ... -
- Clément: good catch !
Do you know why 2.18 is linked to the 2.14 version of custom widgets ? -
- I have the same problem on Ubuntu where:
* QGis 2.14 is installed through repository,
* QGis 2.18 is compiled fro... -
- Hi,
For rule based styling or rule base labeling, when the filter is ELSE and the button 'Test' is clicked, an err... -
- PR proposed here: https://github.com/qgis/QGIS/pull/4810
-
- PR proposed here: https://github.com/qgis/QGIS/pull/4810
-
- !https://issues.qgis.org/attachments/download/11133/Screenshot%20from%202017-07-04%2007-22-25.png!
-
- 1. Create a spatialite layer with an auto-incrementing primary key
2. Turn editing on
3. Add feature
=> the pkuid ... -
- Updated description
-
- Duplicate of #16758
-
- Duplicate of #16758
2017-07-03
-
- Yes it works, thanks Nyall, haven't noticed it in the first place. But I need it to work on a per-layer basis, not fo...
-
06:22 PM Bug report #16784 (Closed): Creation of MultiPolygon shapefile with QgsVectorFileWriter
- Hello,
I am trying to create a multipolygon shapefile using QgsVectorFileWriter with the following code in python ... -
- With the most recent master version it seems that for some relation reference widgets it works, for others not. I don...
-
03:53 PM Bug report #16783 (Closed): QGIS crashes with SIGSEGV on start on OpenSuse
- It shows splash screen and crashes after "Starting Python" appears in status line.
I am running it at OpenSUSE 42.... -
01:23 PM Bug report #16770: copy/paste/save features from one layer to another of the same time broke in ...
- copy and paste works fine also in QGIS 2.18.9.
-
- Although I used the Icon "QGIS Desktop 2.18.10 with GRASS 7.2.1", I have no Grass plugin available. Form the startup ...
-
11:09 AM Bug report #8073: Crash when loading PostGIS raster
- Hi Giovanni, you can find the .tif file and the raster2pgsql command here: #16754 (duplicate).
-
10:52 AM Bug report #16782 (Open): Edited username or password details for WMS set up through browser pane...
- After setting up a WMS feed through the browser panel in QGIS Desktop, any changes made to the username and password ...
-
10:30 AM Bug report #16778: Rule-based styling crash
- Data's and style :
-
- Hello,
1) issue appear with 2.18.10 version (was not available in choice);
2) QGIS work well with rule-based styl... -
- It was a misunderstanding on my side.
I think that compiling the ui files using pyuic directly when building would... -
08:01 AM Bug report #16427: WMTS rendering problems in 2.18 and Master
- For 2.14 it works flawlessly. Only Master and 2.18 are affected.
For 2.18 the problem started with the commit:f5b6... -
- Applied in changeset commit:qgis|f9f98593e04a815edfe1f80c16f6b54890950bda.
-
- Applied in changeset commit:qgis|f9f98593e04a815edfe1f80c16f6b54890950bda.
-
- I think I replicated correctly what you describe here and on stackexchange, and I cannot confirm the issue on 2.18.10...
2017-07-02
-
- Despite the error it seems the edits/pasted features are saved anyway.
In the log it shows this message that does ... -
- Regression, worked as expected in 2.14
-
- Regression, worked as expected in 2.14
-
- Regression, worked as expected in 2.14
-
- The question has been made in the list, the tracker is suited for bug reports and specific feature requests. Once you...
-
- The question has been made in the list, the tracker is suited for bug reports and specific feature requests. Once you...
-
- 1) does in happens on master, as you say in the ticket details, or on 2.18.10 as you say in the description?
2) on... -
- 1) does in happens on master, as you say in the ticket details, or on 2.18.10 as you say in the description?
2) on... -
- Reinhard Reiterer wrote:
> Panning or zooming a map with a PostGIS raster works fine here in QGIS 2.99.0 master (313... -
- Giovanni Manghi wrote:
> Geoffrey Ba wrote:
> > Tried version 2.10, same error
also please attach the complete s... -
- Geoffrey Ba wrote:
> Tried version 2.10, same error
you should have tried something newer (as I suggested=) but a... -
06:01 PM Bug report #16780: Clip 'NoneType' object has no attribute 'fields'
- Tried version 2.10, same error
-
- Geoffrey Ba wrote:
> No I think in an older qgis version, nobody took time to try reproducing it
not true. A de... -
- No I think in an older qgis version, nobody took time to try reproducing it
-
- #13270 is closed as fixed, do you mean that in an older qgis release this was working as expected?
-
- #13270 is closed as fixed, do you mean that in an older qgis release this was working as expected?
-
- #13270 is closed as fixed, do you mean that in an older qgis release this was working as expected?
-
- To reproduce :
Execute the model 'test.model' giving as input Area_B3_MBES_FTA.shp and Bounding_Polygon_AreaB-3_As... -
-
- Tudor Bărăscu wrote:
> Still present in 2.18.10 and Master.
>
> At least for 2.18, the bug appears at my screens ... -
- Tudor Bărăscu wrote:
> Still present in 2.18.10 and Master.
>
> At least for 2.18, the bug appears at my screens ... -
- Still present in 2.18.10 and Master.
At least for 2.18, the bug appears at my screens max resolution: 2560x1600 (M... -
11:48 AM Feature request #16781 (Open): Rotated labels bounding box when editing
- It is very difficult to move rotated labels that are very close to each other because their bounding box isn't rotate...
2017-07-01
-
- On 2.18.10 looks like
Error executing query: SELECT styleQML FROM layer_styles WHERE f_table_catalog='/home/giovan... -
- QGIS got freeze when using rule-based style for layers (create or modify) on v2.18.10
-
- Panning or zooming a map with a PostGIS raster works fine here in QGIS 2.99.0 master (313ec55).
-
- Panning or zooming a map with a PostGIS raster works fine here in QGIS 2.99.0 master (313ec55).
-
- Seems to be related to the standalone installer only, while the OSGEO4W 64 bit installed version works for me. See al...
-
- Nyall, what I don't get is that GEOS is correctly detecting the error when used via sqlite in virtual layers, but not...
2017-06-30
-
11:11 PM Bug report #16777 (Closed): GRASS plugin/Processing tools not loading QGIS 2.18.10 installer (bot...
- *Note - the affected version below states "master" as I was unable to select a 2.18.10 - the affected version is 2.18...
-
- This is an upstream issue - it would need to be fixed in the GEOS library.
-
- This is an upstream issue - it would need to be fixed in the GEOS library.
-
03:57 PM Bug report #16772: check validity algorithm with GEOS method does not detect ring self-intersection
- not only.
It's the same if you use the processing algorithm. -
- You mean the check validity being done while editing ? if so, I confirm that.
-
- see sample...
sql request in DbManager (virtual layer) : select st_isvalidreason(geometry), st_isvalidDetail(geometr... -
06:28 PM Bug report #13836: MySQL Vector geometries are only visible in edit mode
- I can confirm it's still a bug in QGis 2.18.10, Windows 10 and MySQL Server 5.7.16. QGIS can handle the data (search,...
-
06:15 PM Bug report #16776 (Closed): QGIS Database User Privileges/Permissions Bug
- QGIS seems to use the privileges/permissions for the first database user to login when the application is started for...
-
- stop filing the same ticket over and over, thanks :)
-
- stop filing the same ticket over and over, thanks :)
-
- Currently, QGIS-GDAL seems to be only able to display rasters that are stored in the database as it displays a black ...
-
-
- Currently, QGIS-GDAL seems to be only able to display rasters that are stored in the database as it displays a black ...
-
- Currently, QGIS-GDAL seems to be only able to display rasters that are stored in the database as it displays a black ...
-
-
- Seems to be fixed in version 2.18.10.
Please close as I don't have the privileges to do so. -
- Denis, not sure what you mean by "Anyone can confirm that installing QGIS in system actually solves the issue?". Are ...
-
- Steps to reproduce:
- new project
- create a memory layer
- toggle editing
- add a point
- click "new project"
... -
- Copy an oject from one Layer and insert this object inot another layer works. Saving this changes in the layer fails ...
2017-06-29
-
01:41 AM Bug report #16757: reprojecting rasters crossing the dateline
- This file was created by clipping the original to get the file size to under 5Mb for uploading here
-
- The attached file cannot be reprojected to EPSG:4326 as it crosses the 180 meridian. EPSG themselves state that longi...
-
06:10 PM Bug report #16769 (Closed): QGis server GetPrint request renders layer in wrong order, polygons a...
- Hello,
I've setup a QGis Server 2.18.10 (wasn't available in Affected QGis Version on the submit form). Requesting... -
- It looks like using another Application style (settings --> Options --> General), namely Fusion (instead of WindowsXp...
-
- Compared to QGIS 2.18, it looks like the header of the tabs in Processing dialog is thinner, hence the "Run as batch ...
-
- Settings menu --> Options --> General tab --> Application frame, Stype parameter
In QGIS 2.18 (windows 10), I have :... -
- Dmitri Lebedev wrote:
> Here are two videos with the bug reproduced
>
> freezing:
> https://drive.google.com/fil... -
02:34 PM Bug report #16764: Crash when CSV file geometry column name has changed
- Here are two videos with the bug reproduced
freezing:
https://drive.google.com/file/d/0B5R_qTMesoBVaGg5amdIcWlNVH... -
- Dmitri Lebedev wrote:
> @Giovanni Manghi: did you add it as a delimited text layer?
yes, then edited with kate/na... -
- @Giovanni Manghi: did you add it as a delimited text layer?
-
- I'm on ubuntu 16.04 with qgis 2.18.10 and I cannot replicate. Tested loading table as such and also as a point layer.
-
- I'm on ubuntu 16.04 with qgis 2.18.10 and I cannot replicate. Tested loading table as such and also as a point layer.
-
- Andreas Neumann wrote:
> Why was this closed again by "Anonymous"? As far as I know, this is not yet implemented?
>... -
- Why was this closed again by "Anonymous"? As far as I know, this is not yet implemented?
Setting Status again to "... -
- Why was this closed again by "Anonymous"? As far as I know, this is not yet implemented?
Setting Status again to "... -
- closing this, because it is implemented in QGIS 3.x
-
- closing this, because it is implemented in QGIS 3.x
-
- closing this, because it is implemented in QGIS 3.x
-
- I can confirm too (with master). Very embarrassing when you spent time to have a working code.
Also, The old file lo... -
- I the issue also on Linux also with the .osm format, however translating to Spatialite or PostGIS is ok.
I smell a... -
- I the issue also on Linux also with the .osm format, however translating to Spatialite or PostGIS is ok.
I smell a... -
- I the issue also on Linux also with the .osm format, however translating to Spatialite or PostGIS is ok.
I smell a... -
- I the issue also on Linux also with the .osm format, however translating to Spatialite or PostGIS is ok.
I smell a... -
- I the issue also on Linux also with the .osm format, however translating to Spatialite or PostGIS is ok.
I smell a... -
- I thought I had reported this issue but I couldn't find it in the tracker and given that it's still active...
Open... -
-
- Hi Nyall,
has the performance of this new implementation be compared with #7208?
the code available in that ticke... -
- Implemented in master - now both the original layer source and layer name are added as new fields to the merged layer.
-
- Implemented in master - now both the original layer source and layer name are added as new fields to the merged layer.
-
- Victor - are you sure we want to do this? My 2c is that we'd want to avoid this, to prevent any forced dependency on ...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- I think this report should be closed - we're moving away from including providers by default and leaving their implem...
-
- Fixed in master
-
- Fixed in master
-
- Fixed in master
-
- This is possible in master
-
- This is possible in master
-
- This is possible in master
-
03:30 AM Bug report #16665: Native XYZ provider doesn't display all available zoom levels
- > 2017-06-13 15:54 GMT+00:00 Martin Dobias:
> > (...) this is already implemented. In QGIS 3.0 there is also GUI to
...
2017-06-28
-
- Are you referring to selecting features from a layer by a rectangular extent? Or selecting components of the graphica...
-
- This is possible - instead of linking the parameter to a model input, you can directly enter the path to a file in th...
-
- This is possible - instead of linking the parameter to a model input, you can directly enter the path to a file in th...
-
- As Victor stated - this is by design
-
- As Victor stated - this is by design
-
- Fixed in master
-
- Fixed in master
-
- James Lawrence wrote:
> Giovanni Manghi wrote:
> > weird, I have 50GB geotiff with overviews that open just fine. A... -
02:49 PM Bug report #16765: Adding large GeoTiff results in minidump written to C:
- Giovanni Manghi wrote:
> weird, I have 50GB geotiff with overviews that open just fine. Any chance to share the file... -
- weird, I have 50GB geotiff with overviews that open just fine. Any chance to share the file?
-
- weird, I have 50GB geotiff with overviews that open just fine. Any chance to share the file?
-
- weird, I have 50GB geotiff with overviews that open just fine. Any chance to share the file?
-
- weird, I have 50GB geotiff with overviews that open just fine. Any chance to share the file?
-
- Additional point -> this error closes QGIS automatically.
-
- When adding a raster (approx. 2Gb in size), I get the following Crash dumped error:
minidump written to C:
\Users... -
- Sample file:
*v1.csv*:... -
- Couldn't reproduce this with current master, saving to shapefiles.
Can you append a demo shapefile and project? -
- This should be added as a new possibility to specify the provider filter as expression. Possibly with a radio button/...
2017-06-27
-
07:42 PM Bug report #15752: Degradation of rendering performances in MSSQL provider
- Updated results:
!http://i.imgur.com/xQiIbsw.png! -
- See also: #16754 (duplicate)
-
- It would be nice to be able to put variables in provider filter, so user doesn't have to change multiple filters on m...
-
- I'm not sure if the change was by design or not, so I cannot say if is a regression or not. Jurgen?
-
- I'm not sure if the change was by design or not, so I cannot say if is a regression or not. Jurgen?
-
12:56 PM Bug report #16762 (Closed): DXF Export... does not work as in pre 2.18.9
- The bug:
When I’m making an export of .shp files for use in Microstation.
Pre 2.18.9 it would make a level corres... -
- It seems to be fixed in a recent master (from 9068feafc9cc9e938c0450952efcb3c3f71e50b8 or even fresher)
-
11:05 AM Bug report #16761: QGIS randomly crashing when writing vector from Oracle sdo layer
- I created a Question on GIS Stackexchange https://gis.stackexchange.com/questions/245161/write-vector-or-create-featu...
-
I made an uri instance and
Adding a vector layer from SDO to a QGIS project instance is working well.
@uri = Q...-
- This might comes from the fact that QGIS python lib is not installed (not in path), so running qgis_customwidgets.py ...
-
- Hi, can you share the data?
-
- I have a raster covering the New Zealand coastal region in EPSG:2193 which in degrees has a max long of 180.7 degrees...
-
- This concerns master (3.x):
Steps to reproduce:
1.
Load any layer (layer A) that allows setting up a relation ... -
07:41 AM Bug report #16759 (Closed): QGIS shows incomplete data when opening a .pbf/.osm file
- Hi support team,
I'm trying to use QGIS to open Florida dataset (osm.pbf file) to get some data for my startup.
L... -
-
04:25 AM Bug report #16758 (Closed): regression: adding a multi-part feature to a shapefile dataset fails
- Under QGIS master, adding (or pasting) a multi-part feature into a shapefile dataset fails. The feature is added, but...
2017-06-26
-
- Fixed pushed in commit:32dd2b68cdf41b088f40dbd3ca5096c9609383bd and commit:d6e7ec670a250c45639536f791ab23727ffb4fbf
-
- Fixed pushed in commit:32dd2b68cdf41b088f40dbd3ca5096c9609383bd and commit:d6e7ec670a250c45639536f791ab23727ffb4fbf
-
- Fixed pushed in commit:32dd2b68cdf41b088f40dbd3ca5096c9609383bd and commit:d6e7ec670a250c45639536f791ab23727ffb4fbf
-
02:40 PM Bug report #16507: Navigation problem with a VRT
- I have create a new environment variable and i am trying on tow pc and i have no bug.
For me the problem is solve... -
06:57 PM Bug report #16707: SLD export of "hairline" lines results in a different visual thickness
- Andrea Aime wrote:
> Exporting a layer using a "hairline" line width results in a LineSymbolizer with no stroke-widt... -
-
08:37 AM Bug report #16719: Data Source Manager reset values on changes
- Behavior same as before, so NO regression.
-
- Reinhard Reiterer wrote:
> I'm not sure about this. I do not use the @-R@ parameter.
it also happens without it
... -
- Reinhard Reiterer wrote:
> I'm not sure about this. I do not use the @-R@ parameter.
it also happens without it
... -
- I'm not sure about this. I do not use the @-R@ parameter.
-
06:17 PM Bug report #16712: SLD export of categorized style fails if attribute name conflicts with a built...
- fixed by commit:6006359710f7f800cae3327420d1486954e2cf7a
-
03:48 PM Bug report #16756 (Closed): Encoding error in DB Manager
- Since this commit:14ab5eb0bda9a5993b9ab15a3b7de1af9df8dcba
I get this error when trying to import data via 'cadast... -
- Got the same problem i think. Question with bounty opened on GIS stack exchange
(https://gis.stackexchange.com/quest... -
10:36 AM Bug report #16446: Many-to-many (N:M) relationship not working on simple case
- When you say "add new line", you mean "add an entity", right?
Please make a screen cast, I really don't understand w... -
- Steps to reproduce:
# Create a new project with a new point layer, leaving the id field only.
# Create virtual fi... -
- Works now for layer tree -> browser
-
- Works now for layer tree -> browser
2017-06-25
-
- Klas Karlsson wrote:
> -The- My problem with it is in every release (after further examination).
>
> The behavior... -
- -The- My problem with it is in every release (after further examination).
The behavior is actually the same in the... -
- isn't this duplicated of #8073?
-
- File info:
© OpenStreetMap
EPSG: 3857
2976 x 2104 Pixel
609,8 kB (609.777 Bytes)
raster2pgsq... -
- File info:
© OpenStreetMap
EPSG: 3857
2976 x 2104 Pixel
609,8 kB (609.777 Bytes)
raster2pgsq... -
- QGIS crashes when panning or zooming a map with a PostGIS raster.
-
- one more note: this does not seems to happen in the endpoint is qgis server, but I have been able to test only with l...
-
- If the above edits operation are done one at a time (then synchronize back, then placing again off-line the datasourc...
-
- The functionality seems ok is the original layer is a PostGIS one, for example.
If it is a WFS-T and the edits mad... -
- Version info:
QGIS version
2.99.0-Master
QGIS code branch
Release 2.99
Compiled against Qt
5.7.1
Running a... -
- I had this problem too (Debian testing... now stable :-) ),
could not use/show processing untill I used Matteo's 't... -
- It seems like a click on the "New File" button (actually when you set the new file name), the function that is curren...
-
08:01 AM Bug report #8619: Raster Calculator does not handle decimal values
- Still an issue in 2.18.9. Running on Linux Mint. Maybe it's about decimal separators, my locale uses ',', not '.'..? ...
2017-06-24
-
- duplicate of #6180
this is something you can meanwhile to achieve with the photo2shape plugin, or also the tag and... -
- duplicate of #6180
this is something you can meanwhile to achieve with the photo2shape plugin, or also the tag and... -
08:35 AM Feature request #16751 (Closed): open jpeg images with GPS EXIF as points
- When you drag and drop a .jpg image into QGIS it opens it as a Raster, however if the JPEG has a GPS coordinate in it...
-
-
10:17 AM Feature request #15282: backport to 2.18 "v.voronoi.skeleton.txt" (avaiable only on master).
- Isnt' this already implemented in:
https://github.com/qgis/QGIS/blob/master/python/plugins/processing/algs/grass7/... -
- Why set as not easy fix? It looks so to me. Am I missing something?
Thanks.
2017-06-23
-
- I can reproduce under Linux too. I strongly believe this is linked to use of a VRT from several threads which is know...
-
- BUT FIRST VERSION NOT OK
QGIS VERSION / 2.18.5
COMPILED AQAIN GDAL/OGR : 2.1.3
LIJPEG i haven't a version dut i ha... -
> Do you have a methode for using qgis2.18.9 and the same version of gdal/ogr ?
yes, compiling both gdal and qgi...-
- It seems that in the attribute table in QGIS master the attribute tables shows the internal code instead of the displ...
-
- confirmed in master.
-
- I tested that and it works for me though selecting rows is not so easy to understand.
In your dataset, the issue is... -
- Fixed in master
-
- Fixed in master
-
- Fixed in master
-
- Implemented in master
-
- Implemented in master
-
- Implemented in master
-
- Thanks a lot !
-
- This is fixed in master
-
- This is fixed in master
-
- Duplicate of #16248
-
- Duplicate of #16248
-
- To replicate:
* download https://goo.gl/s1qJKa (very big): it has thousands of tables, this was made on purpose to... -
- marjolein hermans wrote:
> strange. here both times problems.
> could my anaconda python installation(s) conflict w... -
09:10 AM Bug report #16743: Couldn't load PyQt - new installation qgis 2.18.9
- strange. here both times problems.
could my anaconda python installation(s) conflict with this python? -
- @Harrisou...
-
- I agree that would be a nice improvement to not have two contiguous polygon with same label...
@Regis, Couldn't some... -
- Not sure I get exactly what you need.
Be aware that union on geometry are really heavy computation tasks and they ...
2017-06-22
-
- Hello QGIS Community,
I have a project with an atlas based on a layer with several entities and attributes.
In my... -
06:07 PM Feature request #16747 (Feedback): Add option to label connected polygons once
- h1. The Problem
Under Layer Properties -> Labels -> Rendering -> Feature options, there is an option to "Merge con... -
- Giovanni Manghi wrote:
> Thomas Ailhaud wrote:
> > I have download the last version 2.18.9.
> >
> > The bug is s... -
04:44 PM Bug report #16741: Cannot load UI form store into PostGreSQL database
- Giovanni Manghi wrote:
> Hi, is this a question/support request or a bug report?
As Bertrand says, it's a bug repor... -
-
01:56 PM Bug report #16741: Cannot load UI form store into PostGreSQL database
- Hi, I think this is a bug report because I encounter the same issue.
I've saved a style with fields populated by lis... -
- Hi, is this a question/support request or a bug report?
-
- Hi,
I can successfully save UI when I save style to PostGreSQL.
Problem is when I wanted to load it. UI is not lo... -
- just did both (standalone and osgeo4w) on win7 pro, no issues at all. My test user has admin rights.
-
- same problem with the osgeo4w one... unfortunately
Couldn't load PyQt.
Python support will be disabled.
Trac... -
- i'll try. problem is that i am not administrator...
-
- try the osgeo4w one, follow the advanced install and see if the result it the same of it works.
-
- standalone installer from http://www.qgis.org/en/site/forusers/download.html (64 bit windows version)
-
- standalone installer or osgeo4w?
-
- I am new to qgis. after installation I get the error below when I start qgis.
please advise how i could solve this.
... -
- Steps to reproduce:
1.
Show an arbitrary attribute table
2.
Right click a column-header and open the "Organiz... -
- Ways to reproduce:
1.
Load two tables with a common key. The second table should be no-geometry "value list" tabl... -
- Currently, it looks like one can use the map canvas attributes (id, rotation, center, height, width...) to style or l...
-
- The browser panel doesn't show all the drives I can connect to. Actually it fails to show a drive I pluged in as a ne...
-
- See screenshot
Note that in 2.18 it has enough size to show all the extent values -
- In the QGIS main status bar toggle the Coordinates widget to Extent.
Right-click in the frame: you are only allowed ... -
- See screenshot.
2017-06-21
-
06:26 PM Bug report #16737 (Closed): QGIS crash every time when I use python console
- QGIS 2.14.14 crashes every time I use Python console. I am using macOS Sierra.
-
- @even make it sense to use a custom code instead of using directly Dataprovider qgis api that seems they work managei...
-
- Fixed per commit:2fb0b16364122badf1b797c77bb89cc1eddffcfe / commit:6cfd1a0f51251691e46741fef519ca6eace11405
The l... -
- the layer that fail is: "Zagros, Elam, and Iran" (the firt enountered in the GDAL GetLayers)
the
geomtype = 0 (wkb... -
- btw tables whould be managed by https://issues.qgis.org/projects/qgis/repository/revisions/8c7ca625cce39a6d38dd808f22...
-
- without much debug I can see that geomname is set only if:...
-
- confirmed
-
- From the contextual menu of the input area, you can choose to save the command history. Hitting Save shows a "History...
-
- In the input area of the Python Console, type *_api*
Normally, it should open the online API documentation of the QG... -
- Damien Smith wrote:
> I also have this issue since 2.18.5 using JPEG-compressed YCbCr GeoTiffs. A workaround is to ... -
- What about the green "funnel" icon? If I understand correctly this is what you're trying to do.
2017-06-20
-
01:30 AM Bug report #16507: Navigation problem with a VRT
- I also have this issue since 2.18.5 using JPEG-compressed YCbCr GeoTiffs. A workaround is to load all of the individ...
-
- This checkbox is already there for atlas features. Legend displays only features visible on current atlas page. Since...
-
- While there are a lot of feature-centric functions, there is no function to get layer as a whole with it's properties...
-
> I have had the exact same experience in February while conducting a QGIS course at an university. Constant minidu...-
- Leigh Seitz wrote:
> Using the osgeo4w installer, I installed the long term version 2.14.15 which fixed the problem ... -
- Leigh Seitz wrote:
> Using the osgeo4w installer, I installed the long term version 2.14.15 which fixed the problem ... -
09:49 PM Bug report #16732: QGIS Crashing Continually
- Using the osgeo4w installer, I installed the long term version 2.14.15 which fixed the problem of crashing on my comp...
-
- how did you install on Windows and macOS?
on Windows did you used the osgeo4w installer? can you check the version... -
- how did you install on Windows and macOS?
on Windows did you used the osgeo4w installer? can you check the version... -
- Hi, I was running a training on introductory QGIS and the most recent version keeps crashing on both PC and Mac users...
-
- Agreed - the amount of work required to fix this is not justified by the extreme rareness of reproducing it in the wild.
-
- Agreed - the amount of work required to fix this is not justified by the extreme rareness of reproducing it in the wild.
-
- "...placed a shapefile into my GeoDatabase in windows explorer by accident..."
it seems to me a very (very) edge c... -
- "...placed a shapefile into my GeoDatabase in windows explorer by accident..."
it seems to me a very (very) edge c... -
09:13 AM Bug report #16727 (Closed): Importing files from GDB containing a .shp file
- When using the, Add Vector Layer -> Directory -> Type= "OpenFIleGDB" and browsing to a Geodatabase created by ArcGIS,...
-
04:04 PM Bug report #16715: Processing: SELECT algs don't work in modeller on Windows
- Anita Graser wrote:
> Since models in current Processing versions ignore selections, I'm not sure if there is any us... -
- For example try v.buffer
-
- Jerome Anthony wrote:
> Giovanni Manghi wrote:
> > is this to report the same kind of issue as #16716?
>
> Is th... -
08:36 AM Bug report #16718: QGIS MSSQL Layer creation error in OSX
- Giovanni Manghi wrote:
> is this to report the same kind of issue as #16716?
Is there anything you guys want from... -
- Cannot confirm on Linux and Windows, 2.18.9 and master.
-
- Cannot confirm on Linux and Windows, 2.18.9 and master.
-
08:13 AM Bug report #16726 (Closed): Using the browser QGis chrashes when opening a folder that contains t...
- The file is a DEM downloaded from EarthExplorer. I could open it in the previous version of QGIS.
https://www.drop... -
- It happens that I created (via ogr2ogr) a GPKG file from a KML one.
This GPKG file works ok in QGIS when layers ar... -
09:53 AM Bug report #16729 (Open): The scaling bar go in the "space" after having activate the atlas
- After having activated the atlas, the X position of my scale bar change in 10000000mm. I put images to illustrate the...
-
- To be more accurate, it's possible to do a selection but the "little square" placed in the angle of the object disapp...
2017-06-19
-
09:22 PM Bug report #16667 (Feedback): Vector field marker length attribute not stored in QML
- Hi Nick! I've tried reproducing this issue with 2.18.9 but it all seems to work correctly here.
Can you give the ... -
- Hi Nick! I've tried reproducing this issue with 2.18.9 but it all seems to work correctly here.
Can you give the ... -
- Hi Nick! I've tried reproducing this issue with 2.18.9 but it all seems to work correctly here.
Can you give the ... -
- Since models in current Processing versions ignore selections, I'm not sure if there is any use case for the select t...
-
06:52 PM Bug report #10790: OpenStreetMap plugin only loads 32 bits numbers ID, then start with negative n...
- I don't know if Spatialite provider supports TEXT identifiers. Or negative integer identifiers (which might be the li...
-
06:21 PM Bug report #16725 (Closed): Parser error in Atlas 'Output filename expression' textbox - badly ha...
- When manually entering the 'Output filename expression', if you leave the textbox before the expression is fully pars...
-
- I agree this is a real problem change, particularly for label placement in layers with many features. Suddenly we hav...
-
- So Nyall and Denis: do you think https://github.com/qgis/QGIS/pull/4728 should be merged with the sip-generated broke...
-
05:16 PM Bug report #16724 (Feedback): tests/src/core/testqgsogcutils.cpp Port away from qt_qhash_seed whi...
- tests/src/core/testqgsogcutils.cpp doesn't build with QT59
see
https://codereview.qt-project.org/188474
qSetGl... -
- There are no one parameter.
-
- not @elpaso confirms with latest build => we have to set it as invelid or we need more info to replicate the issue
-
- Hi @Klas
I can't confirm on linux... can you share the build version?
tnx -
- This code snippet shows how a MaxAngle:70-degrees linearization of a curve gives a wrong result:...
-
11:43 AM Bug report #16721 (Closed): Problem with an empty Geopackage layer and zoom to group
- Zoom to group does not work if one of the layers under the group is an empty gpkg layer. It locks the panning functio...
-
- I reopen that feature request, because the alternate proposal - adding another button - does not seem so nice to me, ...
-
- I reopen that feature request, because the alternate proposal - adding another button - does not seem so nice to me, ...
-
- To reproduce, in a Python console:...
-
>
> Victor, Alexander, Giovanni, do you think this could make sense? Should I open a feature request for this?
...-
07:40 AM Bug report #16646 (Closed): Small errors in SAGA Raster Calculator output
- Applied in changeset commit:qgis|a511ecddcf16ee35fb35119b881b746f5a49741a.
-
- Applied in changeset commit:qgis|a511ecddcf16ee35fb35119b881b746f5a49741a.
2017-06-18
-
- is this to report the same kind of issue as #16716?
-
- Hi I get the following error when I try to create a MSSQL layer in QGIS on OSX (mac).
*Error opening connection: ... -
- The new Data Source Manager resets some options when you change previous options when adding "Delimited Text".
If ...
2017-06-17
-
- A testcase showing the incongruence is here: https://github.com/qgis/QGIS/pull/4746
-
- Writing tests for QgsCircularString::curveToLine I found duplicated points in output.
Here's an example:
CIR... -
- If the policy is to remove them from output it is not working, as the very first word after the comment is being reta...
2017-06-16
-
- Jerome Anthony wrote:
> Attached the image with gibberish in error message
could you please try an see if it happ... -
- Jerome Anthony wrote:
> Image attached
in "host" use the IP address or host name of the server, you don't need to... -
- Giovanni Manghi wrote:
> Use the native MSSQL provider that QGIS has. See attached image.
I am using this one -
- Attached the image with gibberish in error message
-
- Image attached
-
- Hi Giovannie,
I am still getting errors, and it's not very obvious on how to proceed further
-
- Use the native MSSQL provider that QGIS has. See attached image.
-
- Use the native MSSQL provider that QGIS has. See attached image.
-
- Use the native MSSQL provider that QGIS has. See attached image.
-
- I am on OSX (mac)
I have created a DSN using iODBC Administrator.
When I try to create a MSSQL layer using the...
2017-06-15
-
- Hi,
this bug only exists on windows. Select algs ( select by expression, select by location...) work well on linux... -
- Hi,
I've been going deeper into this.
!https://cld.pt/dl/download/779ff37c-34d9-48a2-8514-03873ef4423f/1_SAGA_G... -
- When symbol sizes are defined in mp units they get scaled with the map, which leads to almost unusable layer tree. Sc...
-
- when I cast the field in the SQL view to a date field, QGIS will handle it correctly.
-
- indeed sip does not support docstrings for bindings and the policy is just to remove them from source.
-
- indeed sip does not support docstrings for bindings and the policy is just to remove them from source.
-
- That's by design - sip doesn't support documentation for enumeration values.
-
- Nyall moving the comment from above the enum value to its right side with '//!<' prefix makes it completely disappear...
-
-
08:57 AM Bug report #16693: QGIS crashes when some layer classification unchecked
- I have tried on two others machines. The bug was replicated only on one.
I have completely uninstalled QGIS on the...
2017-06-14
-
- A rotate() function similar to PostGIS st_rotate would be extremely handy for "geometry generator" symbols and other ...
-
05:12 PM Bug report #16712 (Closed): SLD export of categorized style fails if attribute name conflicts wit...
- A style build on an "Area" attribute will conflict with the built-in area function and the export won't contain a pro...
-
02:33 PM Bug report #16665 (Closed): Native XYZ provider doesn't display all available zoom levels
- For future reference (from the ML). Thanks Martin !
2017-06-13 15:54 GMT+00:00 Martin Dobias:
> (...) this is alr... -
- For future reference (from the ML). Thanks Martin !
2017-06-13 15:54 GMT+00:00 Martin Dobias:
> (...) this is alr... -
- These shortcuts are now all working in composer on the latest version of Master.
-
07:13 AM Feature request #16711 (Feedback): Canvas in Dockable / Fullscreen-able Widget
- It would be nice if the map canvas was able to be moved around like a widget.
It would also be nice if this map can...
2017-06-13
-
- QGIS 3.0 has classes for ranges such as QgsDoubleRange, QgsIntRange, QgsDateTimeRange and QgsDateRange (also it's eas...
-
-
- I suspect it's because your doxygen tags are malformed. They should be:
enum SegmentationToleranceType
{
... -
- The problem affected https://github.com/qgis/QGIS/pull/4728
-
- It is sipify.pl doing the mungling, could be this block:...
-
- This diff was introduced by `git commit` (which in turn calls sipify_all.sh:...
-
- Harrissou Santanna wrote:
> Giovanni, i don't think that it's the reopening that makes Qgis crash. Actually Arnaud s... -
- Giovanni, i don't think that it's the reopening that makes Qgis crash. Actually Arnaud suggests to do something that ...
-
- Re-saving a QGIS project into another location with QGIS 3 master does not crash here on the same plataform. Pleas at...
-
- Re-saving a QGIS project into another location with QGIS 3 master does not crash here on the same plataform. Pleas at...
-
- Re-saving a QGIS project into another location with QGIS 3 master does not crash here on the same plataform. Pleas at...
-
- Re-saving a QGIS project into another location with QGIS 3 master does not crash here on the same plataform. Pleas at...
-
-
- Fixed in commit:9a6235dba and commit:7634b0b75
-
- Pull request here: https://github.com/qgis/QGIS/pull/4725
-
02:14 PM Bug report #11954: Atlas doesn't consider map rotation when setting scale
- Encountered this issue when creating my first atlas last week. Made a column for rotating shapes, so they fit best on...
-
- just tested on the same platform on the latest master, no crash. Or maybe I have not understand how replicate so poss...
-
- just tested on the same platform on the latest master, no crash. Or maybe I have not understand how replicate so poss...
-
- just tested on the same platform on the latest master, no crash. Or maybe I have not understand how replicate so poss...
-
- just tested on the same platform on the latest master, no crash. Or maybe I have not understand how replicate so poss...
-
- just tested on the same platform on the latest master, no crash. Or maybe I have not understand how replicate so poss...
-
-
- Notes:
in the QGIS log you will see
2017-06-13T12:30:01 1 Data source is invalid (SSL certificate problem: self... -
- Notes:
in the QGIS log you will see
2017-06-13T12:30:01 1 Data source is invalid (SSL certificate problem: self... -
- Notes:
in the QGIS log you will see
2017-06-13T12:30:01 1 Data source is invalid (SSL certificate problem: self... -
- Thomas Ailhaud wrote:
> I have download the last version 2.18.9.
>
> The bug is still there.
of course, no one... -
- Luigi Pirelli wrote:
> Applied in changeset commit:qgis|87116abd72ac52be042c3bff195a3cc931b035e6.
fix applied als...
2017-06-12
-
- Applied in changeset commit:qgis|b461adda1541c2a115c1b8ab2d8b1a79d6342c52.
-
- Applied in changeset commit:qgis|b461adda1541c2a115c1b8ab2d8b1a79d6342c52.
-
09:43 PM Bug report #16709 (Closed): GeoJSON URLs (https) can't be added to projects in 2.18.9 (worked in...
- QGIS v2.18.9 - GeoJSON URLs can't be added and previous version *.qgs with them in 'break'
---------------
1) A... -
- Range types are data types representing a range of values of some element type. For instance, ranges of timestamp mig...
-
- Exporting a layer using a "hairline" line width results in a LineSymbolizer with no stroke-width property.
That in t... -
- Having a rule based symbology like:...
-
- Applied in changeset commit:qgis|87116abd72ac52be042c3bff195a3cc931b035e6.
-
- Applied in changeset commit:qgis|87116abd72ac52be042c3bff195a3cc931b035e6.
-
- I have download the last version 2.18.9.
The bug is still there.
-
04:14 PM Bug report #16705 (Closed): Handle missing PostGIS with useful warning/error messages
- If a PostgreSQL database doesn't have PostGIS installed or configured properly, the database manager errors out witho...
-
01:39 PM Bug report #16704 (Closed): QGIS 3 : Crash tool reopening option does not loads the last saved pr...
- Open a .qgs project with QGIS 3, save it somewhere else using QGIS, make QGIS crash, click on reopen option, project ...
-
- !https://issues.qgis.org/attachments/download/11070/2017-06-12%2013_27_34-qgep_pully_poc_QGIS3%20-%20QGIS%20632a2be.png!
-
- Click and pan on the node tool creates a selection rectangle which makes QGIS crash.
The user should not do this, ... -
- Giovanni Manghi wrote:
> it is usual in this cases the interested entity to take contact with one of the company tha... -
- it is usual in this cases the interested entity to take contact with one of the company that provide QGIS support and...
-
- ogrinfo says that your KML is not valid.
giovanni@sibirica:~/Desktop$ ogrinfo test.kml
ERROR 4: ERROR parsing ... -
- ogrinfo says that your KML is not valid.
giovanni@sibirica:~/Desktop$ ogrinfo test.kml
ERROR 4: ERROR parsing ... -
- ogrinfo says that your KML is not valid.
giovanni@sibirica:~/Desktop$ ogrinfo test.kml
ERROR 4: ERROR parsing ... -
- ogrinfo says that your KML is not valid.
giovanni@sibirica:~/Desktop$ ogrinfo test.kml
ERROR 4: ERROR parsing ... -
09:20 AM Bug report #16701 (Closed): valid kml 2.1 file but qgis does not open the file
- This is the valid kml file qgis does not open:
<?xml version="1.0" encoding="UTF-8"?><kml:kml
xmlns:xs="http://ww... -
10:00 AM Bug report #16702 (Closed): Conflict in CTRL + d shortcut
- There's a conflict in the Ctrl+d shortcut, it's used both for "Remove Layer/Group" in the Layers panel and for distan...
-
- Applied in changeset commit:qgis|9626d2f65b4d2708ec092bffb7a22efa884fef21.
-
- Applied in changeset commit:qgis|9626d2f65b4d2708ec092bffb7a22efa884fef21.
-
- Applied in changeset commit:qgis|03bfe9bfbcd34f11c05c5a0398907865cc424d9c.
-
- Applied in changeset commit:qgis|03bfe9bfbcd34f11c05c5a0398907865cc424d9c.
2017-06-11
-
- It is the second time that TestQgsActionManager test fails
for unknown reasons, sometime being fixed by just a resta... -
- See also https://lists.osgeo.org/pipermail/qgis-developer/2017-May/048512.html
-
- A commit reference would be better than just a date.
-
- ogr2ogr (which works in the background of Add vector layer) stores all fields as VARCHAR, while the QGIS importer use...
2017-06-10
-
-
- try 2.18.9, attach sample data. Thanks.
-
09:02 PM Bug report #16699 (Closed): QGIS crash dumped
- hi,
I was trying to upload .csv through add delimited layer, converted from .xlsx, however it crashes every time wit... -
- Applied in changeset commit:qgis|68965485210bb317962ad9028a29a86b2e38ba2a.
-
- Applied in changeset commit:qgis|68965485210bb317962ad9028a29a86b2e38ba2a.
-
- The kind of invalidity spot by QgsOSMDatabase::exportSpatiaLite is that wayPoints( w.id() ) returns an empty polyline...
-
- `ways` identifiers go from 26553528 to 471592927.
`nodes` identifiers go from 291056122 to 4657544184.
2^32 is 4... -
- Alright what "Export topology to Spatialite..." does is not really an "export" as it just creates more tables in an e...
-
- Ok I could reproduce. It isn't clear to me what the "Export to Spatialite..." does but will dig further
-
- Ok I could reproduce. It isn't clear to me what the "Export to Spatialite..." does but will dig further
-
- Andre, could you give instructions in the form I gave them in #10790-16? I'll try to figure out but it's a lot of tim...
-
- See also #14823
-
01:04 PM Bug report #16698 (Feedback): When saving project, main windows changes size
- During the saving of a project, the main QGIS window will revert - when full screen - to 100% Width and about 50% Hei...
2017-06-09
-
10:23 PM Bug report #16697 (Closed): Portuguese translation fix
- on the context menu for layers on layers panel the string equivalent to "Set Layer CRS" is incorrect translated to "D...
-
- The "Multipartes para partes simples" is opening the "Singleparts to multipart" instead. I believe is due to some mis...
-
- I've tested the following v.net modules after this change, and work well:
- v.net.distance
- v.net.iso
- v.net.all... -
05:56 PM Bug report #16695 (Closed): browser panel restore causes unwanted WMS connections when expanded
- The leaves of WMS connections should always be collapsed when restoring.
Patch: (PR will follow)
https://github.c... -
- Does this also apply to the 2.14 nightlies (qgis-ltr-dev) in OSGeo4W? Sounds like an issue related to GDAL/OGR 2.2,...
-
- Hello Regis,
I understand your explanation, but there is the same problem with en Gpkg file. So I think this is a ... -
- Hi Etienne,
shp can't handle NULL values, see: http://support.esri.com/technical-article/000005811
Maybe in prev... -
- In QGIS 2.14.15, with a SHP layer, when I create a new field (type real for example), when I save the modifications, ...
-
- Romain Blanc wrote:
> Same result without any plugin and after having deleted the .qgis2 folder.
>
> Here is the ... -
- Same result without any plugin and after having deleted the .qgis2 folder.
Here is the GPKG with two layers and th... -
- Tried hard here on same qhis version and platform, no issues. please try again after having removed any 4rd party plu...
-
- Take minima two layers, give them a classification style. Then uncheck minima one class per layer: QGIS will freeze a...
-
04:17 PM Feature request #16694 (Open): Select Features by Polygon - make selection polygon more visible?
- When using "Select Features by Polygon" is it possible to adjust/make the selection polygon more visible?
If the sel... -
- Seems now you need to specify image size and follow strict HTML rules, then it works.
-
- seems with local image is still broken and in 2.14 was ok.
-
- seems with local image is still broken and in 2.14 was ok.
-
- seems with local image is still broken and in 2.14 was ok.
-
- https://github.com/ptarroso/layer2kmz
-
- This issue needs to be addressed in the GDAL library - that's where the KML styling is handled.
> I am having to g... -
- This issue needs to be addressed in the GDAL library - that's where the KML styling is handled.
> I am having to g... -
- how did you connected to the mysql server? using the qgis "add vector layer" button or using a 3rd party plugin?
-
- how did you connected to the mysql server? using the qgis "add vector layer" button or using a 3rd party plugin?
-
- how did you connected to the mysql server? using the qgis "add vector layer" button or using a 3rd party plugin?
-
09:27 AM Bug report #16688: only show MySQL-Data with setting filter
- hello giovanni
this is my first ticket, sorry for mistakes. please relieve it.
greetings -
10:59 AM Bug report #16691: Font style translation problem on OSX (French)
- Hello, I have an other suggestion to make. Is it possible to simply deactivate the font translation? It's very annoyi...
-
- I have a problem with osx font translate on Qgis. For example (with a french language selected in osx system preferen...
-
08:17 AM Bug report #16685 (Closed): QgsSpatiaLiteProvider::loadFieldsAbstractInterface trying to assign d...
- Applied in changeset commit:qgis|f677eaf04f73331b1ef5180b2f30018d5e1faa53.
-
- Applied in changeset commit:qgis|f677eaf04f73331b1ef5180b2f30018d5e1faa53.
-
- Applied in changeset commit:qgis|63269479682b9b71d0de74b518de09d5f72029d2.
-
- Fixed in master
-
- Fixed in master
-
- Seems fixed in latest releases
-
- Seems fixed in latest releases
-
- Applied in changeset commit:qgis|e41346375582b6c01f2c88a801ed94b243da98ca.
-
- Applied in changeset commit:qgis|e41346375582b6c01f2c88a801ed94b243da98ca.
-
- Applied in changeset commit:qgis|9805782bc237f268c18319ae1e78b79a2b382111.
-
- Applied in changeset commit:qgis|9805782bc237f268c18319ae1e78b79a2b382111.
Also available in: Atom