Activity
From 2014-02-03 to 2014-03-04
2014-03-04
-
11:40 PM Bug report #9704: Gdal Modules Errors on OsX Mavericks
- Rhenriques, I tried your method and it works! Many thanks
Cheers -
08:55 AM Bug report #9704: Gdal Modules Errors on OsX Mavericks
- Francesco, I have been able to make 2.2 GDAL modules work by pickup the gdal folder from version 2.0.1 located in "/A...
-
- I have trashed QGIS 2.2 and reinstalled 2.0.1-Dufour (I had to reinstall matplotlib). Now the warp module works like ...
-
- As Francesco Vidotto said, it was working in previous versions. I do lots of reprojections (warp module) and format t...
-
- Same problem here with Mavericks.
It never occurred with previous versions of QGIS
Warp (reproject)... -
11:05 PM Bug report #9713 (Closed): No angle > 90° in line pattern fill in layer properties
- layer properties > style > symbol selector > line pattern fill.
In QGis 2.1.X you could use an angle of e.g. 135° to... -
10:43 PM Feature request #9709: Logo suggestion
- Ah, I see. Very nice designs. Better than mine at least :)
-
05:54 AM Feature request #9709: Logo suggestion
- see also http://99designs.de/logo-design/contests/qgis-needs-logo-210397
-
- Just an attempt to spark off a modern looking logo. Go ahead and close this issue if it's irrelevant or useless.
-
08:54 PM Feature request #8050 (Closed): improve automatic CRS attribution on loaded layer with no CRS
- Fixed: #08965ed2f0382e0c398bcb4d8385b8ed2be2f093
-
- Fixed: #08965ed2f0382e0c398bcb4d8385b8ed2be2f093
-
01:12 PM Bug report #9712 (Closed): QGis 2.x failes to add vector theme on Fedora 20
- Hello all, I have just faced with an unexpected behavior of QGis 2.x on Fedora Desktop 20. For a some reason I cannot...
-
10:39 AM Bug report #9711 (Closed): Incorrect Mac OS info on download page
- Ran into this yesterday when helping a student get qGIS on his Mac laptop.
Source page: http://www.qgis.org/en/site/... -
09:31 AM Bug report #9532: Node tool causes crash
- Hi, I'm encountering what might be the same problem. I'm on Windows 7 with QGIS 2.0.1 and having frequent crashes wh...
-
08:31 AM Bug report #9693: OpenStreetMap XML import takes a long time
- Probably the best would be both were using the spatialite provider which already does the correct choice (https://git...
-
- So the same switch as in offline editing (https://github.com/qgis/QGIS/blob/master/src/core/qgsofflineediting.cpp#L28...
-
- Emilio G wrote:
> The software should simply check if the name is a duplicate. If not, leave it as is. It cannot simp... -
07:13 AM Feature request #9689: Joins should be more mindful of DBF field name length limitations
- The software should simply check if the name is a duplicate. If not, leave it as is. It cannot simply prepend the lay...
-
07:11 AM Bug report #9710 (Closed): r.surf.fractal fails with 'dyld: Library not loaded: /usr/local/lib/li...
- The r.surf.fractal GRASS tool is looking for libfftw3.3.dylib, but the QGIS application package contains libfftw3.dyl...
-
05:56 AM Feature request #9592: Oracle should only look in metadata table for metadata
- I've just installed the latest nightly and it's still taking about 2 mins to list the tables so I guess this hasn't b...
-
- Yep, works in master.
-
05:12 AM Feature request #9412 (Closed): add a "minimum characters to wrap" option to labels
- Fixed in changeset commit:"9b71d081f1deb26193eca483ad9e7287bdc7af6b".
-
- Martin, fantastic addition, this should find its way in the 2.4 what's new visual change log.
-
02:41 AM Feature request #8898 (Closed): "Save vector layer as" - limit export
- Fixed in changeset commit:"8ac3a94b99ec5ab0d64f6967e3f2eb577d0acb0a".
-
04:37 AM Bug report #9708 (Closed): Handle bad layers fails on a bad WMS layer
- When opening a QGIS project with missing/bad WMS layer, "handle bad layers" dialog offers to select a file(!) to fix ...
-
- Oliver, you are talking about #8718
It's a different issue and it isn't strictly dependant on this one (although both... -
- Fixed in changeset commit:"86ea4bf39a9535b6524e015fb7e1a1975d2cd6e9".
-
- Hi Larry - the algorithm in PAL that checks overlaps in PAL works with label candidate rectangles (possibly rotated),...
-
02:35 AM Bug report #9612: Web view doesn't work with specific URL in feature form
- Rémi Bovard wrote:
> Yes, because if put only http://www.camac.vd.ch/ it works... It's very strange, can you reproduc... -
02:17 AM Bug report #9604: Attribute table: the icons for "Unselect all" and "Delete selected features" ar...
- In fact, using the green color is more in line with what's used in the digitizing toolbars (new feature, move feature...
-
01:15 AM Bug report #9671: SAGA and GRASS: "missing dependency" error when logged using "Windows network u...
- Yep. As it is on saga_03.png. I just found out it must have something to do with my network user profile because I ha...
-
01:13 AM Bug report #9707: Zoom problems in qgis 2.x on ubuntu 12.04
- No I am using 2.2 Valmiera - the same problems also appeared in 2.0 Dufour
I have attached an example of a shape lay... -
- No I am using 2.2 Valmiera - the same problems also appeared in 2.0 Dufour
I have attached an example of a shape lay... -
- No I am using 2.2 Valmiera - the same problems also appeared in 2.0 Dufour
I have attached an example of a shape lay... -
- No I am using 2.2 Valmiera - the same problems also appeared in 2.0 Dufour
I have attached an example of a shape lay... -
- No I am using 2.2 Valmiera - the same problems also appeared in 2.0 Dufour
I have attached an example of a shape lay... -
01:01 AM Bug report #9707 (Feedback): Zoom problems in qgis 2.x on ubuntu 12.04
- a similar issue should have been solved in qgis 2.2, are you using it or still using 2.0.1?
please also attach sampl... -
- a similar issue should have been solved in qgis 2.2, are you using it or still using 2.0.1?
please also attach sampl...
2014-03-03
-
- Thomas McAdam wrote:
> LAst line has a mistake, should read:
>
> Fields area_m2 and area_ha2 were calculated in the ... -
- Thomas McAdam wrote:
> LAst line has a mistake, should read:
>
> Fields area_m2 and area_ha2 were calculated in the ... -
- I have qgis running on Linux Ubuntu 12.04. 64 bit. When I zoom in in layers (shape-files) in lat lon projection the l...
-
- Does not seems to apply to all actions(?) I just made one (using FF to open a URL written in the table of attributes)...
-
- Does not seems to apply to all actions(?) I just made one (using FF to open a URL written in the table of attributes)...
-
- Miroslav Umlauf wrote:
> OK, now I am lost. I have completely uninstalled all QGIS on Windows 7 64bit. I have deleted... -
- OK, now I am lost. I have completely uninstalled all QGIS on Windows 7 64bit. I have deleted folders C:\\OSGeo4W and ...
-
- I guess that 2.2.0-2 should be installable with osgeo4w.
-
- I guess that 2.2.0-2 should be installable with osgeo4w.
-
03:25 PM Bug report #9700: Georeferencer locks up QGIS
- What is the version of qgis package you are using? This problem has already been fixed (commit:a3b99a8). Please try t...
-
- OSGeo4W 64bit install only problem.
The Georeferencer locks up QGIS.
See http://osgeo-org.1560.x6.nabble.com/Georefer... -
- Giovanni Manghi wrote:
> Patrick Dunford wrote:
> > OK so I finished editing the two layers (25KB and 32KB, shapefile... -
- Giovanni Manghi wrote:
> Patrick Dunford wrote:
> > OK so I finished editing the two layers (25KB and 32KB, shapefile... -
-
- did it happened in previous qgis versions?
-
- did it happened in previous qgis versions?
-
- Several GDAL Modules give me error dialogues while selecting some options.
MacOSX Mavericks.
The following examples... -
- Not an easy task, the prefix is necessary to avoid attributes with the same name, then shapefiles have a 10 chars col...
-
- Not an easy task, the prefix is necessary to avoid attributes with the same name, then shapefiles have a 10 chars col...
-
- Not an easy task, the prefix is necessary to avoid attributes with the same name, then shapefiles have a 10 chars col...
-
- One just needs to call "SELECT InitSpatialMetadata(1)" for SpatiaLite >= 4.1 instead of just "SELECT InitSpatialMetad...
-
- Giovanni Allegri wrote:
> I've noticed that during the freezed time a Sqlite journal file is continously created and ... -
- I've noticed that during the freezed time a Sqlite journal file is continously created and destroyed. I don't know wh...
-
- The OSM import from a downloaded XML to Spatialite takes much more time on Windows then on Linux.
With the following ... -
- I agree at least on the first part, the lines are barely visible when there are styled/raster layer in the canvas.
-
- I agree at least on the first part, the lines are barely visible when there are styled/raster layer in the canvas.
-
- I agree at least on the first part, the lines are barely visible when there are styled/raster layer in the canvas.
-
- I agree at least on the first part, the lines are barely visible when there are styled/raster layer in the canvas.
-
09:41 PM Bug report #9703 (Closed): make measure tools lines more visible and persistent until the user ch...
- The current behavior of the measure tool, QGIS 2.2, is to draw a thin red line between points selected by the user. T...
-
- Hi,
please test qgis 2.2 and/or attach sample data. Cheers! -
- Hi,
please test qgis 2.2 and/or attach sample data. Cheers! -
09:23 AM Bug report #9701 (Closed): Vector Difference failing to end
- On OSX, using QGIS 2.0.1, "Vector/Geoprocessing Tools/Difference" can't handle large layers properly. Using a point f...
-
- One probable explanation is that the two tools were coded in different ways (and as far as I understand in different ...
-
04:13 AM Bug report #9695 (Closed): Unexplained difference between geometry cheking and topology checking
- I'm testing make valid on a sample of real data. It effectively cleans up all the topology errors, as found by the To...
-
11:51 PM Bug report #9706: marker symbol not centered
- !http://i.imgur.com/tX9618O.png!
-
- I noticed a problem of centering when using the cross (x) symbol within a circle symbol.
The cross is not centered on... -
11:12 PM Bug report #9705 (Closed): Rotation of the label can not be only up to half-turn
- I set a label rotation that I was set to 270 degrees rotation of the label.
However, as a result of the 180 ° rotati... -
03:04 PM Bug report #9655: Strange behavior of labeling for multipolygons, due to geometry simplification
- Larry Shaffer wrote:
> Hi Alvaro,
>
> Your pull request doesn't fix the issue in my testing, using the provided samp... -
01:40 PM Bug report #9655: Strange behavior of labeling for multipolygons, due to geometry simplification
- Hi Alvaro,
Your pull request doesn't fix the issue in my testing, using the provided sample project. (See other comm... -
08:21 AM Bug report #9612: Web view doesn't work with specific URL in feature form
- Yes, because if put only http://www.camac.vd.ch/ it works... It's very strange, can you reproduce it?
Ok, that's a g... -
- Just to be sure: Are you sure that there is no problem regarding proxy/dns etc?
Apart from this, I will be refactori... -
- Juste made some tests with stable release 2.2:
* it work fine with on Ubuntu 13.10
* still not on Windows 7
For info... -
07:33 AM Bug report #8720 (Closed): Font for layer city_data.face_seed was not found (AlArabiya)
- This was fixed before 2.2.0 went public.
Maybe with commit:24e53f4bfb9046722f93a8a7cbd00c1308ae3db8 -
- This was fixed before 2.2.0 went public.
Maybe with commit:24e53f4bfb9046722f93a8a7cbd00c1308ae3db8 -
- This was fixed before 2.2.0 went public.
Maybe with commit:24e53f4bfb9046722f93a8a7cbd00c1308ae3db8 -
- This was fixed before 2.2.0 went public.
Maybe with commit:24e53f4bfb9046722f93a8a7cbd00c1308ae3db8 -
07:07 AM Feature request #2071 (Closed): Anchor Choice for symbols
- This is now implemented in QGIS 2.2
-
- This is now implemented in QGIS 2.2
-
- !https://issues.qgis.org/attachments/6930/classification_attribute.png!
-
- When enabling option "Canvas & Legend > Layer legend > *Display classification attribute names*" and enabling "Right ...
-
- When using rotation on SVG symbols, they are magnified if printed (but no in application canvas).
This is working as ... -
- Virginie CADIC wrote:
> Thank you for your answer.
> I had installed qgis on several computers last month, so I appl... -
- Virginie CADIC wrote:
> Thank you for your answer.
> I had installed qgis on several computers last month, so I appl... -
04:46 AM Bug report #9692 (Closed): Public key is not available for Wheezy
- Thank you for your answer.
I had installed qgis on several computers last month, so I applied the same procedure tod... -
- Thank you for your answer.
I had installed qgis on several computers last month, so I applied the same procedure tod... -
- Did you run:
@gpg --recv-key 47765B75
gpg --export --armor 47765B75 | sudo apt-key add -
@
See "Version stable de QG... -
- I am trying to install the last version of qgis on Debian Wheezy. I have followed the installation procedure, but whe...
-
- The current choice of colours (red for normal nodes, blue for selected ones, pink for snapping, and
green for errors)... -
04:28 AM Bug report #9696 (Closed): wrong reading of the projection from the prj file (EPSG 25832)
- Hi all,
it seems that QGIS doesn't read the information of the .prj when the EPSG = 25832 (QGIS assign automatically ... -
01:34 AM Bug report #9691 (Closed): Rotation of ESRI Shapefile with transparency in Print Composer
- By rotating a map [add image] in the print composer [Item Proprieties -> Main Proprieties -> Map -> Map rotation], wh...
2014-03-02
-
- Fixed in changeset commit:"2f2d6ac95b052bb490c47ba53eb327c96176eed1".
-
- Fixed in changeset commit:"bb7cd4053a9aa676466ce3ea4212956e2a712537".
-
- Alvaro, great, will verify when the pull is committed to qgis master.
This should definitively be backported to a 2.... -
- Hi Mathieu, I think this pull fixes the bug:
https://github.com/qgis/QGIS/pull/1219
-
- Using the 'Horizontal' or 'Free' placements in label configuration the text is drawed inside of polygon.
The PAL labe... -
- I have changed how resolve the issue. I use 'buffer' method to convert the geometry to valid, and it works better
-I... -
- I have changed how resolve the issue. I use 'buffer' method to convert the geometry to valid, and it works better
-I... -
04:52 PM Bug report #9690: Incorrect areas using field calculator.
- LAst line has a mistake, should read:
Fields area_m2 and area_ha2 were calculated in the same circumstances as area_... -
- I am able to recreate the bug in 2.2 as well, although it's characteristics are slightly different. In the screengrab...
-
- I am able to recreate the bug in 2.2 as well, although it's characteristics are slightly different. In the screengrab...
-
- Thomas McAdam wrote:
> Sorry should have been 2.01 for affected version. I will have a go at recreating the error in ... -
- Sorry should have been 2.01 for affected version. I will have a go at recreating the error in 2.2 and report back.
-
- In the description you say 2.0.1 but then in ticket details affected version is 2.2.
In QGIS 2.2. this issue should ... -
- In the description you say 2.0.1 but then in ticket details affected version is 2.2.
In QGIS 2.2. this issue should ... -
- This was using QGIS 2.01 in Windows 7.
I had a project containing several shape files (and an Openlayers plugin laye... -
- When performing a "join" between a DBF file and a shape file, QGIS will prepend the field names with the name of the ...
-
- > When I open a vectorfile i EPSG 4326 *the project is changed to this projection - My setting is overruled.*
> When ... -
-
- Lene Fischer wrote:
> Please take this seriously! What am I doing wrong?
I'm taking it very seriously, sorry if you ... -
01:11 AM Bug report #9644 (Reopened): WMS and CRS - No reprojection
- Please take this seriously! What am I doing wrong?
Default CRS for new projects:
I have a new project - CRS set to U... -
- Please take this seriously! What am I doing wrong?
Default CRS for new projects:
I have a new project - CRS set to U... -
11:09 AM Feature request #9688 (Closed): store the layer data source in a saved style
- I'd like to be able to save a style, and include the layer info including type & data source, so that the layer, styl...
-
- I have an open layer with an action assigned to it. I save the style for that layer.
When I try to apply that style ... -
06:30 AM Bug report #9604: Attribute table: the icons for "Unselect all" and "Delete selected features" ar...
- I'm also fine with a green polygon in "delete selected features".
-
01:52 AM Bug report #9604: Attribute table: the icons for "Unselect all" and "Delete selected features" ar...
- Hi Anita,
I suggest changing the color of "delete selected features" from yellow to blue or green (or another tone of... -
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1220
Alvaro -
- Hi, I have located the error, these geometries are not closed (they have 4 points), I fix it.
Thanks
Alvaro -
01:21 AM Bug report #9686 (Closed): Geometry simplification bug with grid layer
- Using layer simplification on a square grip leads to rendering artifacts : only triangles are shown.
-
- Fixed in changeset commit:"5d6fc3dcd7271e051ddf4495edf45952222674c7".
-
- Fixed in changeset commit:"f2dbf9dc3e64ad4c46d1c65cc13e2a0188d297bf".
-
- Fixed in changeset commit:"951baee4008885997c7834457443edae53beadb5".
-
- ok, cannot confirm on both Mint (Cinnamon DE) and Windows 7.
-
- ok, cannot confirm on both Mint (Cinnamon DE) and Windows 7.
-
- Donovan Cameron wrote:
> Yea, here is some screens.
>
> First one shows the Log Messages panel open.
>
> Second you... -
- Donovan Cameron wrote:
> Yea, here is some screens.
>
> First one shows the Log Messages panel open.
>
> Second you... -
- Donovan Cameron wrote:
> Yea, here is some screens.
>
> First one shows the Log Messages panel open.
>
> Second you...
2014-03-01
-
-
09:37 AM Bug report #4051: Cannot display SpatiaLite views based on tables with spatial index
- Similar issue still found in QGIS 2.2?
-
08:01 PM Bug report #9620: Measure line tool reports incorrect units
- Thanks Giovanni - learnt a lot from your response
Tony -
- I think you raise some important issues about how tools should be grouped in toolbars.
Concerning your second sugges... -
03:30 AM Bug report #9684 (Closed): Improve tool grouping and color usage in toolbars
- I don't know if anybody is interested in this, but the UI could be further improved using clearer groupings of toolba...
-
- Using Alexandre Neto's suggestion for delete selected adds both consistency in the editing toolbar and a visible diff...
-
- Using Alexandre Neto's suggestion for delete selected adds both consistency in the editing toolbar and a visible diff...
-
- Thanks for your input @Tobias! Since you are raising a new issue in your second post, it would be good to open a new ...
-
- implemented in commit:d6495abe
-
- implemented in commit:d6495abe
-
- implemented in commit:d6495abe
-
- Giovanni Manghi wrote:
> > There is also the "prepair lib":https://github.com/tudelft-gist/prepair, as "discussed pre... -
- PAL library already has a centroid algorithm forced within of the polygon.
It is assigned when the 'placement' prope... -
> There is also the "prepair lib":https://github.com/tudelft-gist/prepair, as "discussed previously":http://osgeo-or...-
- Hi Martin,
Do you think such prepared geometry could be used in PAL lib to make the overlap-check algorithm more eff... -
09:06 AM Bug report #9657: Log Message panel is closed when qgis is minimised and restored.
- Yea, here is some screens.
First one shows the Log Messages panel open.
Second you can see just QGIS, without the L... -
- Yea, here is some screens.
First one shows the Log Messages panel open.
Second you can see just QGIS, without the L... -
- Donovan Cameron wrote:
> I can see it in Windows 8.1 (64bit, OSGeo4W) and Arch Linux 64bit.
then maybe I'm looking a... -
- Here's the screen from Windows 8.1 64bit (OSGeo4W) showing the missing scroll-bar in Python tab for the log messages ...
-
- as for the other similar ticket I cannot confirm or I'm looking at the wrong place.
-
- as for the other similar ticket I cannot confirm or I'm looking at the wrong place.
-
- I've closed the ticket for now, can you please post this at the OSGeo4W issue tracker? https://trac.osgeo.org/osgeo4w...
-
07:49 AM Bug report #9685 (Closed): C run time error on load - QGIS 2.2.0/Win7 64bit
- QGIS installed from http://download.osgeo.org/qgis/win32/QGIS-OSGeo4W-2.2.0-1-Setup-x86_64.exe, replacing previous 1....
-
-
- Hi,
I get your point but the tool actually work in a different way: it doesn't do any kind of projection transformat... -
- Hi,
I get your point but the tool actually work in a different way: it doesn't do any kind of projection transformat... -
- Hi,
I get your point but the tool actually work in a different way: it doesn't do any kind of projection transformat... -
- Hi,
I get your point but the tool actually work in a different way: it doesn't do any kind of projection transformat... -
- Yes it can be the case. I have tested install osgeo4w64 on my fresh Windows 7 64b at home and all is working also aft...
-
- paths to applications can be mixed up if you install both the standalone and osgeo4w versions of qgis. Is this the ca...
-
- Alexander Bruy wrote:
> Maybe related to #9683
anyway I'm closing this for lack of feedback, the original reporter c... -
- I'm not sure how we could fix this. Could we do something different for selection rather then re-render the feature?
-
- Martin Dobias wrote:
> Umm... what is wrong with it? :-) Map canvas has to be refreshed when the selection changes be... -
- Martin Dobias wrote:
> Umm... what is wrong with it? :-) Map canvas has to be refreshed when the selection changes be... -
- Martin Dobias wrote:
> Umm... what is wrong with it? :-) Map canvas has to be refreshed when the selection changes be... -
- Martin Dobias wrote:
> Umm... what is wrong with it? :-) Map canvas has to be refreshed when the selection changes be... -
- Martin Dobias wrote:
> Umm... what is wrong with it? :-) Map canvas has to be refreshed when the selection changes be... -
- Martin Dobias wrote:
> Umm... what is wrong with it? :-) Map canvas has to be refreshed when the selection changes be... -
-
- as far as I know the DXF format does not store any info about the CRS/SRID.
-
- as far as I know the DXF format does not store any info about the CRS/SRID.
-
- as far as I know the DXF format does not store any info about the CRS/SRID.
-
> Anyways the question is should the overview query always expect indb data or not.
better ask this in the develope...-
- Donovan Cameron wrote:
> Looks like this reared its ugly head in 2.2 and isn't a part of the desktop file anymore. Is... -
- Donovan Cameron wrote:
> Looks like this reared its ugly head in 2.2 and isn't a part of the desktop file anymore. Is... -
- Donovan Cameron wrote:
> Looks like this reared its ugly head in 2.2 and isn't a part of the desktop file anymore. Is... -
- have you tried update your sources and re-install?
-
- have you tried update your sources and re-install?
-
- have you tried update your sources and re-install?
-
- has this been added then? adding resolution "fixed/implemented"?
-
- this seems fixed in qgis 2.2, please reopen if necessary.
-
- this seems fixed in qgis 2.2, please reopen if necessary.
-
- Lene Fischer wrote:
> I click "new project"
just tested again (under Windows) and no problems.
Check again your
se... -
02:51 AM Bug report #9624 (Closed): line drawn on wrong side of edge with when draw line only inside polyg...
- Fixed in changeset commit:"66913320f07adb215f0d7b10df7d6509273fd91f".
2014-02-28
-
12:35 AM Bug report #9532: Node tool causes crash
- Maybe related to #9683
-
- After merging MTR branch "Add feature" tool causes QGIS crash when editing layer. Steps to reproduce:
# Add shapefile... -
- Also confirmed on QGIS 2.2 under Windows and Linux
-
- Also confirmed on QGIS 2.2 under Windows and Linux
-
- I click "new project"
-
- Lene Fischer wrote:
> Exatly this is my problem. I set the CRS to UTM 32 in settings I set the On the fly to UTM 32 a... -
- Exatly this is my problem. I set the CRS to UTM 32 in settings I set the On the fly to UTM 32 and the it changes to W...
-
- Lene Fischer wrote:
> Hi iovanni,
> I´ve set the settings to be 25832 (UTM 32) - Start New projects in UTM 32
> I´ve ... -
- Hi iovanni,
I´ve set the settings to be 25832 (UTM 32) - Start New projects in UTM 32
I´ve set on the fly to set CRS ... -
- Lene Fischer wrote:
> Hi Giovanni,
> Please see the attached video. http://screencast.com/t/YTUllDTl9bcz
> Also attac... -
- Lene Fischer wrote:
> Hi Giovanni,
> Please see the attached video. http://screencast.com/t/YTUllDTl9bcz
> Also attac... -
- Lene Fischer wrote:
> Hi Giovanni,
> Please see the attached video. http://screencast.com/t/YTUllDTl9bcz
> Also attac... -
- I can see it in Windows 8.1 (64bit, OSGeo4W) and Arch Linux 64bit.
-
- Cannot confirm on Ubuntu and Windows.
-
- <--moved to new ticket-->
-
- I attached a picture of a suggestion.
!QGIS_select_and_unselect_icons.png!
I don't think rubber-band selection need... -
08:20 AM Bug report #9674 (Closed): WFS GetFeature Request does not return features
- Fixed in commit:ccde1d48d8efc867724a2d680e524c6443321fe9
Cherry-picking for release 2.2 ? -
- Fixed in commit:ccde1d48d8efc867724a2d680e524c6443321fe9
Cherry-picking for release 2.2 ? -
- Steps to reproduce:
* Add a layer
* Open attributes table
* Filter on a field (which returns something) -> the number... -
- As discussed on the mailing list [1], it would be more consistent to have the save button next to the toggle edit but...
-
- Does this happen with any project? and in a different machine?
-
- Does this happen with any project? and in a different machine?
-
- Does this happen with any project? and in a different machine?
-
- Does this happen with any project? and in a different machine?
-
04:49 AM Bug report #9678: Python console : crash when printing from signals
- I need to trigger the signal a lot of times before it crashes.
But yes, without plugins it still crashes.
I forgot t... -
03:55 AM Bug report #9678 (Feedback): Python console : crash when printing from signals
- I can't confirm here, opening the python console and pasting your snippets I am not getting the crash after panning t...
-
- I don't think it started with multi-thread rendering, but cannot be 100% sure (I will have to test on previous versio...
-
- Did this start with MT-rendering?
Can you try... -
- When using Python's 'print' command from some signals, and when the console has been activated (i.e. print are not re...
-
03:28 AM Bug report #9679 (Closed): Cannot edit "display as" field in general layer properties.
- Field "display as" is not editable and always contents same string as "Layer name" field
2014-02-27
-
- Umm... what is wrong with it? :-) Map canvas has to be refreshed when the selection changes because the selected feat...
-
- it happens also when selecting from canvas
-
- New description:
it seems that there are gis packages (at least the most famous one) that does not refresh the canva... -
-
- Fixed with the switch to multi-threaded rendering
-
- Fixed with the switch to multi-threaded rendering
-
- Fixed with the switch to multi-threaded rendering
-
- Fixed with the switch to multi-threaded rendering
-
- Hi Giovanni,
Please see the attached video. http://screencast.com/t/YTUllDTl9bcz
Also attach the vectorlayer
WMS : ht... -
- Hi,
I'm sorry but the description is not clear to me and I'm unable to try replicate the issue.
Can you add clear s... -
- Hi,
I'm sorry but the description is not clear to me and I'm unable to try replicate the issue.
Can you add clear s... -
- Hi,
I'm sorry but the description is not clear to me and I'm unable to try replicate the issue.
Can you add clear s... -
- Fixed in changeset commit:"3a317a061e0f2be9726b66f7f5caca304948fba7".
-
03:40 PM Bug report #9677 (Closed): Saving layout template causes QGIS to freeze
- Translated to english (mkuhn):
When I try to save a layout template, qgis freezes
Original:
wenn ich versuche Layout... -
- Fixed in changeset commit:"33a8b6344b006696dec3322f7e6336fc69267fdf".
-
- Confirmed here
Map getfeatureinfo error: Protocol "" is unknown [?SERVICE=WMS&VERSION=1.1.1&REQUEST=GetFeatureInfo&B... -
- Confirmed here
Map getfeatureinfo error: Protocol "" is unknown [?SERVICE=WMS&VERSION=1.1.1&REQUEST=GetFeatureInfo&B... -
- Confirmed here
Map getfeatureinfo error: Protocol "" is unknown [?SERVICE=WMS&VERSION=1.1.1&REQUEST=GetFeatureInfo&B... -
09:19 AM Bug report #9626 (Closed): Crash when adding OpenLayers layer
- This bug was closed intentionally, because it is a problem with the plugin not the main application. See bug #9649
-
08:51 AM Bug report #9626 (Reopened): Crash when adding OpenLayers layer
- I experience the same problem with 2.3.0-Master. Here is the console output attached as a text file.
-
- I experience the same problem with 2.3.0-Master. Here is the console output attached as a text file.
-
- Sorry, I meant to the line 145: https://github.com/qgis/QGIS/blob/master/python/console/console_output.py#L145
-
03:20 AM Bug report #9573: hostnames with non-ascii characters cause python console to fail.
- The line 139 is "self.selectAllShortcut.activated.connect(self.selectAll)"
Should I replace the whole line by unicod... -
- Hi Raphael,
can you try to change the file console_output.py to the line 139
by replacing with the following: @unic... -
- I changed my host name and now it works fine. Thank you!
-
- My host name is "Raphaël-PC".
-
- No, I had to write TYPENAME=* with the right typename.
The bug is not with all layers. We made more tests. QGIS-Serv... -
04:10 AM Bug report #9674: WFS GetFeature Request does not return features
- Does TYPENAME= mean that you do not give a typename?
-
- The GetFeature Request does not return elements.
The response of the request is valid but with a bbox : 0,0,0,0 and ... -
- Duplicate of #9573.
Please can you provide your hostname?
To get your hostname open the windows cmd command line and... -
- Duplicate of #9573.
Please can you provide your hostname?
To get your hostname open the windows cmd command line and... -
- When simplification is activated for a given layer, labels might not be rendered for all of the layer's polygons. I'm...
-
- Jeremy Palmer wrote:
> As part of this fix I noticed this: #0dc0483ca2d68ad9ef8fc6f67026a349598c7cbe#commitcomment-54...
2014-02-26
-
- Operating Syste: Windows 7 (64 bit)
QGIS: 2.2.0 - Valmiera
Installation: osgeo4w (64bit)
Problem: When I try to op... -
- I have tested it on 3 PCs with Windows 7 64. Straight after install of QGIS 2.2 I was able to run GRASS commands and ...
-
- Fixed in changeset commit:"2519f1db0475914431f3ce51c7cbf919392fca21".
-
- In qgis master (2.3), the map item background is also rendered a opaque white, regardless of whether the user set a d...
-
- Larry Shaffer wrote:
> What error? I know the workings of that class pretty well.
I meant that it miscalculates the ... -
- Alvaro Huarte wrote:
> Hi Larry, I fixed an error in the simplification algorithm. It created invalid polygons with t... -
- Alvaro Huarte wrote:
> Larry Shaffer wrote:
> > Alvaro Huarte wrote:
> > >
> > > Hi Larry, I can try to solve this i... -
- Hi Larry, I fixed an error in the simplification algorithm. It created invalid polygons with two points:
https://gith... -
- Hi Alvaro,
Of note: liblwgeom is part of PostGIS, but is basically available as a separate package for the major QGI... -
- Larry Shaffer wrote:
> Alvaro Huarte wrote:
> >
> > Hi Larry, I can try to solve this issue, are you agree ?
>
> Ye... -
- Alvaro Huarte wrote:
>
> Hi Larry, I can try to solve this issue, are you agree ?
Yes, please do. I assigned the is... -
- Larry Shaffer wrote:
> Hi Alvaro,
>
> I added you as a watcher to this issue, since I believe it is directly related... -
08:51 AM Bug report #9655: Strange behavior of labeling for multipolygons, due to geometry simplification
- Indeed turning off on-the-fly simplification solves the labeling problems.
Many thanks,
Augustin -
- Hi Alvaro,
I added you as a watcher to this issue, since I believe it is directly related to the new geometry simpli... -
- It seems to be an issue with the new geometry simplification. Under Vector Layer Properties -> Rendering, uncheck *Si...
-
- Here is sample data that shows the problem.
-
03:03 PM Feature request #9492: Browser doesn't list layers - WMTS
- As part of this fix I noticed this: #0dc0483ca2d68ad9ef8fc6f67026a349598c7cbe#commitcomment-5460726
-
- Fixed in changeset commit:"2027505b186655402d1891febf510f72c8faa008".
-
12:45 PM Bug report #9669 (Closed): Remove shebang from processing plugin files
- Please remove the shebang from the following files:
python/plugins/processing/saga/{SagaDescriptionCreator.py,SagaHe... -
- see my PR that implements basic support for undo of layer and group removal)
https://github.com/qgis/QGIS/pull/1218
-
- Currently it is empty; better fill it with "Autogenerate"
-
- Some of the slowness using pg over a very slow connection could possibly be avoided; e.g. deactivating a layer does n...
-
08:22 AM Bug report #9310: Save dialogue for Geoprocessing outputs is inconsistent
- This remains an issue in the current version (2.2)
-
- Just for information - I have tested the data on the new version (2.2) and this is no longer an issue.
-
- Fixed in changeset commit:"1d84978f8e037459947027ca10cf44d386e83843".
-
06:47 AM Bug report #9666: Expression Engine Parsing
- Additional notes. This error impacts existing styles.
-
- Update breaks expression engine string builder handling of at least conditional statements. This appears to be a par...
-
- Fixed in changeset commit:"238350ff494277c2c2abb696ec745e97fdafd677".
-
- Until #6696 is resolved, apparently "In Memory Raster" doesn't work and adding it is a new feature. So I'd suggest re...
-
- Also seems to be fixed by commit:daf1e0b6881cdb77df6f6a9dc988ad92e0f9019d (for #9661)
-
- Also seems to be fixed by commit:daf1e0b6881cdb77df6f6a9dc988ad92e0f9019d (for #9661)
-
- Actually this was working fine in MTR branch before merging in changes from 2.2 development :)
-
- Fixed in changeset commit:"daf1e0b6881cdb77df6f6a9dc988ad92e0f9019d".
-
- Fixed in changeset commit:"cb919e972e11573fe2a0e58f4d946c6a30c9f792".
-
- I was testing joined layers to perform GetFeatureInfo on joined fields. I've noticed that issuing requests to the mai...
-
-
01:42 AM Bug report #8765: Postgis raster shows random data with out-db image data
- I'm not sure if this is duplicate of the #8628, this might actually be a just problem created by me by creating overv...
-
- So there are some GUI issues - for those I would suggest introducing a checkbox "keep in memory only" that would disa...
-
- http://www.qgis.org/en/site/forusers/download.html
"Binary packages (installers) for 2.2.0 are currently being updat... -
- http://www.qgis.org/en/site/forusers/download.html
"Binary packages (installers) for 2.2.0 are currently being updat...
2014-02-25
-
- QGIS says that a new version is released, but all I download is version 2.0.1.
Sorry for posting this as an issue, bu... -
- If I render using 92dpi, the label is sized correctly; the more I increase the dpi, the more wrong the label size get...
-
- Under qgis master (2.3), labels are rendered in tiny size when a composer sheet is exported to image. See attached la...
-
- Data sample, one table with a polyhedral and the other with a TIN :...
-
-
- Please attach some data.
-
- PostGIS tables with geometries of type PolyhedralSurface or TIN cannot be loaded anymore :
* no correct type is detec... -
- I am putting this to my "to think about" list :-)
-
- Martin, I see, I was about to comment on the slight variation (just compiled a new build with your commit in, testing...
-
- Note: the scale in map preview may be a bit different from the scale shown in GUI (but it is correct in print output)...
-
- Well, that was easy :)
-
- Fixed in changeset commit:"1d3ae87c36922900e8306b3e0435ce39b96ec16e".
-
- Scale value defined of composer map items is definitively broken, see attached scale_error.png which shows that a map...
-
- Scale value defined of composer map items is definitively broken, see attached scale_error.png which shows that a map...
-
- Ok, I realise what's happening. The rule based symbology relies on minimum / maximum scale to activate some styles. T...
-
- Under qgis master (2.3), the qgis composer map canvas fails to properly render a complex rule-based symbology layer. ...
-
12:24 AM Bug report #9647 (Closed): Line-pattern Symbologie: No pattern from left-top to right-bottom
- Fixed in changeset commit:"74ef8f32ff54a2297bd433fc76b90c852dd16f37".
-
10:26 AM Bug report #9647: Line-pattern Symbologie: No pattern from left-top to right-bottom
- Confirmed in master, ubuntu 13.10.
-
- Under qgis master (2.3), labels that are set to curved placement fail to render properly onto map items in the qgis c...
-
- Just for the record, Martin is supposed to refactor the legend within the 2.3 dev cycle.
Anyhow, there might be a wa... -
- Nathan - I agree with everything you just said.
Undo action would be best (I was just thinking about it), but I had... -
- I think the decision we made was the correct one. Removing a layer is a unrecoverable action in the sense there is n...
-
02:41 PM Feature request #9094: Del-key should delete feature
- It was a long discussion, and I'm happy we've finally found the solution :) There are clearly two kinds of QGIS users...
-
- Richard Duivenvoorde wrote:
> I myself have (irreversably) removed wrong layers myself (especially complex styled lay... -
- Hi Jürgen, the method 'QgisApp::removeLayer()' is called to delete layers and groups (it removes all selected nodes i...
-
- Fixed in changeset commit:"e9f808ad0fe780f954a89c17397f6d4f2959e56b".
-
11:15 AM Feature request #9094: Del-key should delete feature
I myself have (irreversably) removed wrong layers myself (especially complex styled layers, but also slow loading da...-
- Larry Shaffer wrote:
> *However*, realize that the Duplicate Layer action is right next to the Remove Layer action in... -
- Etienne Tourigny wrote:
> Agreed - simple solution is to always ask confirmation with shortcut, but never with contex... -
- Agreed - simple solution is to always ask confirmation with shortcut, but never with context menu. It that ok?
sorry... -
- There was a long discussion about it in (https://github.com/qgis/QGIS/pull/1010).
I can understand that action from ... -
- Etienne Tourigny wrote:
> I find it rather annoying that I have to confirm to remove a layer from the canvas. If I ex... -
- I find it rather annoying that I have to confirm to remove a layer from the canvas. If I explicitly click the context...
-
- I find it rather annoying that I have to confirm to remove a layer from the canvas. If I explicitly click the context...
-
- Here: https://github.com/qgis/QGIS/pull/1217
-
- ftool's random point does not recognize memory layer's integer column as it's looking for column type "Integer", and ...
-
- Hi Augustin,
Can you please share the data and project?
Is this with *Label every part of multi-part features* chec... -
- Hi Augustin,
Can you please share the data and project?
Is this with *Label every part of multi-part features* chec... -
- For labeling multipolygons it seems that sometimes the label is placed on rather small parts of the shape, whereas th...
-
- Tested on Ubuntu, nightly build from repository
Draw labeling start
QGIS died on signal 11CANVAS update timer!
[Thr... -
- Donovan Cameron wrote:
> I think it should only be one browser panel entry in the qgis application or explain to the... -
- I think it should only be one browser panel entry in the qgis application or explain to the users what makes Browser(...
-
- This is on Linux 64-bit, Arch.
-
- I just got a large python error message from a plugin when qgis started.
Noticed the scrollbar on the right is missi... -
- The log messages panel is closed every time the main qgis window is minimized or restored.
Other panels stay open ex... -
- Looks like this reared its ugly head in 2.2 and isn't a part of the desktop file anymore. Is it going to be included ...
-
- As a result of #9653 - I accidentally created a raster in C:/qgis/bin.
However, when I right clicked on the layer and... -
- Reproduce:
1) Load Raster Calculator, enter whatever formula.
2) Type desired filename (a.tif) into "Output layer".
3... -
- Thanks Jürgen.
Is this going to carry over to all dialogs that were using the old way or is it specific to just the N... -
- Proposed solution - don't require an "output layer" to be specified when the output format is "In Memory Raster".
Als... -
06:25 AM Feature request #9652 (Closed): merge shapefiles: add option to get the result directly in projec...
- new description:
the project CRS is not taken into account, but it can be convenient to have an option to create t... -
- I already did that - #9649
cheers! -
- Etienne Tourigny wrote:
> sorry - I reopened because the bug is still present.
>
> I tried to move the ticket to th... -
- sorry - I reopened because the bug is still present.
I tried to move the ticket to the openlayers plugin tracker fo... -
- Why reopen? The original bug was fixed (thanks Jurgen!), the openlayers crash cannot be fixed in QGIS.
-
- Excellent.
-
- Updated so that overview uses extent of layers visible in overview. If no layers are visible in overview, it would us...
-
- Fixed in changeset commit:"29e9272285e1196602d535476b7fd58e2b3f0f13".
-
- Martin, QGIS' original behavior was to simply show project extend, but it was changed in late 2012 to show only exten...
-
- Hmm... actually the current behavior seems like the correct one to me :-) and previous seems wrong.
Like this you ca... -
- I would propose changes to both icons as well to improve the differences but try keep the logic to other icons.
For ... -
- I would propose changes to both icons as well to improve the differences but try keep the logic to other icons.
For ... -
- Fixed in changeset commit:"1732db5266e9e9b6ac4383dc36d029e02ed592b1".
-
- Fixed in changeset commit:"0310bb2463c3ce2b9b2d928e772f78b4addc772d".
-
- While the dialog is deactivated when opening a dataset, it still pops up uninvitedly when using "Save as ..." to save...
-
- Fixed in changeset commit:"71a799f0c19994444f1e05e7b49bae378f215a70".
2014-02-24
-
12:33 AM Bug report #9647 (Closed): Line-pattern Symbologie: No pattern from left-top to right-bottom
- There is a Bug in the Line-Pattern-Fill Symbology. When I change the angle of Line pattern, then is a Angle of 45° a ...
-
- When I set a CRS to 25832 and open a vectorfile in 4326 - it is not reprojected.
If I open a WMS and choose 25832 - a... -
-
- I just realized the MTR allots one thread per layer, it does not allocate various threads for layers features - so di...
-
- Martin - sorry for more noise... but I have just realized that the rendering of tileindex (basically a custom rendere...
-
- Martin Dobias wrote:
> Etienne: I believe there is no need to look for alternatives of QWebPage - it is just about ch... -
- Jürgen Fischer wrote:
> Etienne Tourigny wrote:
> > Quick fix would be to render all plugin layers in the main thread... -
- I have added QgsRasterLayer::previewAsImage() in 75a2edb and updated the tileindexplugin (in github for now).
Howeve... -
- Under qgis master (2.3), the map overview extend regressed:
- Under qgis 2.2, the map overview extend is confined to ... -
- Steps to reproduce:
1. Create a project
2. Add one vector layer
3. Right click on added vector layer and activate '[x... -
- In qgis master (2.3), 1-band raster rendering in grayscale _with contrast enhancement_ produces visual artifacts all...
-
- When I open a project with broken data sources from spatialite databases, the default type in the file browser is Sha...
-
- +1 for both
-
12:21 PM Bug report #9604: Attribute table: the icons for "Unselect all" and "Delete selected features" ar...
- We probably should simplify and more rely on the context. For delete (any object, selection) I would use just red X.
... -
- We probably should simplify and more rely on the context. For delete (any object, selection) I would use just red X.
... -
- Fixed in changeset commit:"5fd8567e598fb3c96a1346081b9abfcceb71026c".
-
- The "Save As" dialog where the user specifies where they want their new Shapefiles (New -> New Shapefile) to be is di...
-
11:49 AM Feature request #9639 (Closed): Keep CRS when saving DXF files
- *Qqis 2.2.0 by Osgeo, under Win7_x64*
If you save something as DXF (setting any output CRS) and you load the .DXF fi... -
- Raphael Luthi wrote:
> I've got the same problem:
And your hostname is? -
- I've got the same problem:
Operating Syste: Windows 7 (64 bit)
QGIS: 2.0.1 - Dufour
Installation: osgeo4w (64bit)
... -
10:44 AM Bug report #9266: QGIS gets stuck during on the fly reprojection
- Ok from my side with QGIS 2.2, thanks.
-
- Ok with QGIS 2.2 and gdal was never below 1.8, currently 1.10.
Also speed of postgis operations is back to normal wit... -
- Reproduce:
1) Plugins -> Manage and install plugins.
2) Select any plugin.
3) Now put the mouse into the "Search" bar... -
- Fixed in changeset commit:"b59233546f90bb626ecfe4458cf246d585032e9b".
-
04:55 AM Bug report #9631: Identify form
- Confirmed here:
http://osgeo-org.1560.x6.nabble.com/Identify-with-Feature-Form-on-QGIS-2-2-td5105372.html -
- When selecting the option 'Open form if one feature is selected', the identify result form is coming in addition of a...
-
- Following #9634
I'd suggest a better "error" message.
If the Oracle provider isn't installed, maybe:
"The Oracle l... -
- Confirmed. It works now that I've downloaded and installed that too.
I'd missed that there's a "QGIS Desktop" AND A ... -
- Ah, ok - so you probably installer just @qgis@.
@qgis-oracle-provider@ (and in turn the large @oci@ package) is an o... -
- 64bit. Installed on a Windows 7 64bit machine.
I just used whatever the OSGeo4W defaults were.
There doesn't seem to... -
- 32 or 64bit? Is @qgis-oracle-provider-2.2.0-1@ installed?
-
- Using 2.2.0 from the OSGeo4W.
Clicking on the Oracle provider button brings up a dialog:
"Cannot get Oracle select di... -
- Jürgen Fischer wrote:
> @rownum@ starts with 1, so @rownum=0@ returns no rows.
True, I mis-stated.
But yes, 1=0 shoul... -
- Jonathan Moules wrote:
> select * from osmm.os_mm_topographic_area where rownum=2
Sorry, that was a typo, that I cor... -
- Jonathan Moules wrote:
> Anything with "rownum = n" results in data being returned.
> Whereas the 1=0 doesn't get any... -
- Anything with "rownum = n" results in data being returned.
Whereas the 1=0 doesn't get any data returned, just the ta... -
- Jürgen Fischer wrote:
> > @select * from osmm.osm_mm_topographic_area where rownum = 0@
>
> Just retrieves the field... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"115f9807f10f168b4abd0c0dba5b82d15a426027".
Apparently @1=0@ works... -
- Fixed in changeset commit:"115f9807f10f168b4abd0c0dba5b82d15a426027".
-
- Nathan Woodrow wrote:
> Does oracle have system tables or functions that you can get information about a table from. ... -
- Does oracle have system tables or functions that you can get information about a table from. In MS SQL we use sp_colu...
-
- > @select * from osmm.osm_mm_topographic_area where rownum = 0@
Just retrieves the field list, but no actual data. ... -
- "Only look in meta data table" - checked
"Use estimated table metadata" - checked
When I click "add" for a Oracle ta... -
- Yep, fixed in 2.2.0. Bonus: It now doesn't come up with just one error.
Many thanks! :-) -
05:49 AM Bug report #9523: openProject macro won't load when enable Macros setting set to Ask
- Thanks.
-
- I installed qgis 2.2 this morning from ubuntugis-unstable on ubuntugis-precise. I formerly had 2.1 installed from ub...
-
05:28 AM Feature request #6294: Add LIKE and case insensitive filters to QGis Server
- No problem to add ILIKE as well.
-
- LIKE has been added. Why don't we add ILIKE too?
-
- This feature request hasn't had further discussions.
Do you see any counterindication in implementing a LIKE/ILIKE f... -
- Hi Jürgen,
Thanks for taking the time to write a detailed reply. I appreciate I'm not being as clear as I should be.... -
-
02:11 AM Bug report #9629: "Stop map rendering" button is missing in QGIS master
- That's very true.
In other desktop GIS packages, there is usually a shortcut key to cancel rendering (e.g. ESC) but a... -
- Martin and I talked about this a while ago. It doesn't really seem necessary anymore. It was really on there in the ...
-
- "Stop map rendering" button in the status bar is missing in QGIS master
QGIS version 2.3.0-Master
QGIS code revision ... -
02:33 AM Bug report #9630 (Closed): Identify on WMS layers broken
- Nothing happens when trying to use the identify tool on a WMS layer on master. This message is logged:...
2014-02-23
-
- Etienne Tourigny wrote:
> Quick fix would be to render all plugin layers in the main thread to avoid any problems lik... -
- ok, I'll look into that within the next few weeks, if nothing has changed. Add new function QgsRasterLayer::previewAs...
-
- Yeah the Qt warning says it all - QPixmap should not be used in a thread. And, QgsRasterLayer::previewAsPixmap() shou...
-
- Martin - I have just tested my plugin tileindex, which works with qgis 2.2, and it crashes also, because it uses QPix...
-
- Etienne: I believe there is no need to look for alternatives of QWebPage - it is just about changing how the QWebPage...
-
- Added the MTR tag to keep track of any threaded rendering issues.
-
- The core problem specific to the openlayers plugin, as Jürgen wrote, is that it relies on QWebPage and QWebFrame, whi...
-
- Nathan: currently there is a technical problem that providers are handled by core library, but Python plugins are han...
-
- Couldn't we solve this issue by exposing the QgsDataProvider stuff to Python and implement this stuff as data provide...
-
- Actually it is not a general problem of plugin layers. For example, the Crayfish plugin (which also uses QgsPluginLay...
-
- Quick fix would be to render all plugin layers in the main thread to avoid any problems like this one.
Ideally, plug... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"4b820362c2eb3529bd19e37e40210233b03c92b6".
Still crashes - but no... -
- Fixed in changeset commit:"4b820362c2eb3529bd19e37e40210233b03c92b6".
-
- confirmed. Here is debug output....
-
- QGIS code revision: bc87d51
Affected version should be QGIS 2.3.0-Master
-
- Error I get prior to crashing QGIS:...
-
07:48 PM Bug report #9628 (Closed): Wrong column / field calculated in joined table
- When calculating a new column / field based on a column from a joined table, the wrong (adjacent to the left) column ...
-
-
04:31 PM Bug report #9627 (Closed): Check QGIS Version shows incorrect information in v2.2.0
- In 2.2.0, when you click on "Help" > "Check QGIS Version" the pop up "QGIS Version Information" window states "You ar...
-
- The delete selected icon is also used in the editing toolbar. In my opinion, the delete selected icon is inconsistent...
-
- For reference: the leftmost icon is "delete selected features" while the rightmost icon is "unselect all". There's ba...
-
- Etienne Tourigny wrote:
> I don't use large spatialite files, but 10GB is rather large for a single file. Perhaps you... -
- I just did the update to QGIS from OSGeo4W (it installed qgis-common) so that fixed the DLL issue on Windows 8.1 and ...
-
- I've got QGIS For Android running, and it doesn't have this issue. It can list layers quickly, almost instant, and lo...
-
- I don't use large spatialite files, but 10GB is rather large for a single file. Perhaps you should split it up in sev...
-
- I suspect this is just normal sqlite behaviour (untested)
-
09:50 AM Feature request #9625 (Closed): New GRID-function in Composer
- I would like to see a new grid function in composer, where a grid is not a property in a map object, but an object in...
-
- Fixed in changeset commit:"3f6543d93bae0955ef7b1c704fd4fc392e67549c".
-
- on my ubuntu system that package is installed, but it is not a dependency for qgis package - so that should be added ...
-
- leolami - wrote:
> Hi all,
>
> I have the same problem with the same srs (3003).
> In my QGis project I set a on-the... -
> Which version of GDAL are you running?
at the time the ticket was filed qgis master in the nightly repo was buidi...-
- Leyan Ouyang wrote:
> Now the result is correct for you?
no you are right, I forgot an import detail when I tested ... -
- Leyan Ouyang wrote:
> Now the result is correct for you?
no you are right, I forgot an import detail when I tested ...
2014-02-22
-
-
- In qgis 2.0.1 there was an issue that reported bogus area/length values when reprojection was ON.
This is fixed in q... -
- In qgis 2.0.1 there was an issue that reported bogus area/length values when reprojection was ON.
This is fixed in q... -
- After loading OpenStreetMap layer with the Open Layers plugin the measurement tool malfunctions
To reproduce:
1. Cre... -
- Patrick Dunford wrote:
> OK so I finished editing the two layers (25KB and 32KB, shapefile, file based layer) then hi... -
- Patrick Dunford wrote:
> OK so I finished editing the two layers (25KB and 32KB, shapefile, file based layer) then hi... -
04:12 PM Bug report #9526: File based layer edits and posts taking extremely long time
- OK so I finished editing the two layers (25KB and 32KB, shapefile, file based layer) then hit Save All and waited for...
-
- I think it's still happening, just not as extreme (yet). Taking 4 minutes to put a layer into edit mode and using 12 ...
-
- I'm happy with it for now. I've been using it for a few days and haven't seen a repeat of the problem.
-
-
- Is the "Save Output Shapefile" dialog the only one affected? Is there any difference for
* The open dialogs (e.g. ... -
- The new "draw line only inside polygon" feature for simple line symbology doesn't handle polygon rings properly, lead...
-
- When using this Esri WMTS connection endpoint: http://s1-mdc.cloud.eaglegis.co.nz/arcgis/rest/services/Cache/Topogra...
-
05:22 PM Bug report #9621 (Closed): Remove Topology Checker tolerance column from rule settings
- Could the tolerance column be removed from the Topology Checker's 'Topology Rule Settings' table (see attached screen...
-
- If this is normal behaviour of spatialite/sqlite, close as needed.
But It does seem like that initial reading of the... -
- I noticed that I have some large spatialite db (+10GB) that load slowly when adding a layer to the map canvas, they n...
-
- Believe this is fixed. Reopen if necessary.
-
- python dependencies are not always easily installed - especially in mac...
Adding this dependency would require pack... -
- When building packages for Fedora I noticed that currently httplib2 is shipped with QGIS. The Fedora package maintain...
-
- Fixed in changeset commit:"ececdb71aec28882c49eab4acd0fcdb31b8155ff".
-
- Fixed in changeset commit:"0dc0483ca2d68ad9ef8fc6f67026a349598c7cbe".
-
- Fixed in changeset commit:"efc507ac4772071359047049c6c8f0157231e75c".
-
- on second thought "overwriting" a readonly file doesn't make sense as you probably made it readonly just to prevent t...
-
- on second thought "overwriting" a readonly file doesn't make sense as you probably made it readonly just to prevent t...
-
- Readonly projects are not supported. So you can always change the project and save it somewhere else. If you save ...
-
- Readonly projects are not supported. So you can always change the project and save it somewhere else. If you save ...
-
04:54 AM Bug report #9617 (Closed): .qgs project file is read-only does not work
- With qgis 2.1 (master, Valmiera) to create a project and get it done .qgs file read-only (right-click on the file Pro...
2014-02-21
-
- While ostensibly fixes the issue, there is still a flaw with QFontDatabase.styleString() returning generic style name...
-
- Fixed in changeset commit:"90aa18a5c674cf816ddae1488d9d4c8d67b87ff8".
-
- Fixed in changeset commit:"7e33fdec37c52bd3428c8a1c5324874fa201ba17".
-
08:38 PM Bug report #9569: Unexpected result in topological editing when snapping to the line element curr...
- I tried with revision 882dd0c pulled yesterday. I am on Linux (Archlinux), but I don't think it can be platform-speci...
-
- Leyan Ouyang wrote:
> Nothing changed from my side, I did not see any commit related to that either.
>
> Could someo... -
- Nothing changed from my side, I did not see any commit related to that either.
Could someone else confirm whether th... -
- Etienne Tourigny wrote:
> Fixing this would require fixing QgsVectorFileWriter() and copying the .qpj file to .prj fi... -
- Fixing this would require fixing QgsVectorFileWriter() and copying the .qpj file to .prj file.
-
- confirmed. look like the ogr provider needs updating... probably too late to include this in 2.2 though! At least the...
-
08:54 AM Bug report #7368: QGIS writing out incorrect .prj file
- I am also having trouble with the .prj file QGis is creating when working with 3857. I'm using Qgis 2.0.1
-
- Jonathan Moules wrote:
> "only look in meta data table" - I believe this checkbox should speed up loading of any sing... -
- I see what's happening here. There's some confusion about what the two metadata checkboxes do. My perception is that ...
-
- Jonathan Moules wrote:
> I don't think this has actually been implemented; or at least, it doesn't seem be working (o... -
- I don't think this has actually been implemented; or at least, it doesn't seem be working (or maybe I'm missing somet...
-
- Good catch, thanks.
Because the issue is still happening I figured I hadn't reported this particular thing before. I'... -
06:53 AM Feature request #9616 (Open): Layer Alias in Snapping option dialog
- I have a lot of layers with a very long and coded name.
These names are quite the same except a letter or a number in... -
- Joshua Vande Hey wrote:
> This appears to continue to be an error on QGIS desktop 2.0.1 on windows. If you go to the... -
03:11 AM Bug report #5075 (Reopened): Qgis crashes in Raster calculator
- This appears to continue to be an error on QGIS desktop 2.0.1 on windows. If you go to the raster calculator and pre...
-
01:54 AM Bug report #9357: Lots of PostGIS connections with a standalone python script
- Have found this to be a good workaround:
vlayer = QgsVectorLayer(uri.uri(), layerName, "postgres", False)
specifyin... -
01:42 AM Bug report #9350: reprojected postgresql layers are plotted with offset and very slow
- Hi all,
I have the same problem with the same srs (3003).
In my QGis project I set a on-the-fly reprojection to 3857... -
- Hi all,
I have the same problem with the same srs (3003).
In my QGis project I set a on-the-fly reprojection to 3857... -
- Hi all,
I have the same problem with the same srs (3003).
In my QGis project I set a on-the-fly reprojection to 3857...
2014-02-20
-
- Fixed in changeset commit:"f805f127027691f3d3b665353058121364f9ecb7".
-
- Per Gammerath wrote:
> Does that mean that I can fix it somehow, or does it mean that it will be fixed in version 2.2... -
- Per Gammerath wrote:
> Does that mean that I can fix it somehow, or does it mean that it will be fixed in version 2.2... -
- Does that mean that I can fix it somehow, or does it mean that it will be fixed in version 2.2.0?
-
- Pull request https://github.com/qgis/QGIS/pull/1203 fixes this bug
-
- The point distance tolerance value is not saved nor read in project files. Reloading the project file resets the valu...
-
- The datum transformation dialog box does not appear when adding a layer in Datum Lisboa (EPSG 20790 or EPSG 20791) to...
-
- Confirmed!
Thanks Marco! -
- This pull request ( https://github.com/qgis/QGIS/pull/1205 ) improves the offset of lines using GEOSOffsetCurve if GE...
-
- This pull request ( https://github.com/qgis/QGIS/pull/1205 ) improves the offset of lines using GEOSOffsetCurve if GE...
-
- Not sure anything in Qgis could fix this.
-
11:08 AM Bug report #9594: Save output shapefile dialogue is slow to load filenames
- More info, narrowing the problem and considerably reducing the impact:
A network drive was mapped but no longer avai... -
- duplicate of #8850
-
- duplicate of #8850
-
10:31 AM Bug report #9575: Georeferencer: Polynomial 2 transformation with 6 GCP is unable to process
- Solution: put - for longitude like -77° 45' 00"
Error: Failed calculation processing of the control points. Processi... -
- Michel Proulx wrote:
> Michel Proulx wrote:
> > Problem solved.+ West of the Meridian line longitidude coordinates ar... -
-
- Please test with the latest development version of QGIS - there have been some fixes to crashes in WFS, so your probl...
-
05:27 AM Bug report #9609 (Closed): Crash during WFS GetFeature request
- I'm trying to get an internal WFS 1.1.0 service running in QGIS. QGIS unfortunately only supports 1.0.0 so I'm trying...
-
- Steps:
* Load/Create a layer with a varchar(255) field
* Set this field as 'Web view' in edit widget (layer propreti... -
- Another fix (commit:d92a0e) - make sure to show preview of "$area" + make the preview consistent with field calculato...
-
- I confirm, the $area preview shows the result
-
- Giovanni Manghi wrote:
> > For 2) and 3), if you did not use "none / planimetric" ellipsoid for measuring, the result... -
> For 2) and 3), if you did not use "none / planimetric" ellipsoid for measuring, the result makes sense because the...-
- Giovanni Manghi wrote:
> The input is a 1x1km grid in a projected CRS (tested 3763)
>
> 1) otfr off area = 1000000
... -
- The behaviour that Giovanni described is exactly what I am obtaining too. As I told before, and as Giovanni wrote, th...
-
- Martin Dobias wrote:
> I do not feel confident merging the proposed PR this close before the release as there are sev... -
- The real issue with the project properties and setting of on-the-fly reprojection flag, CRS, map units, ellipsoid is ...
-
- Merged the two commits from Alvaro (commit:35791aa and commit:c784c0)
-
- Martin Dobias wrote:
> I do not feel confident merging the proposed PR this close before the release as there are sev... -
- I do not feel confident merging the proposed PR this close before the release as there are several non-trivial change...
-
07:30 AM Feature request #9607 (Closed): Remove inactive Danish translator
- fixed in 478e479
-
- fixed in 478e479
-
01:58 AM Feature request #9607 (Closed): Remove inactive Danish translator
- Preben Lisby is not part of translating QGIS at all anymore, and the part he initially translated was very small. For...
-
- Fixed in changeset commit:"a1ada3c54ceb9c4c2bf30b4d7afb2e2c70153fb3".
-
- Giovanni Manghi wrote:
> Is this a regression?
I think so -
- Is this a regression?
-
- Now QGIS always reads all features of a layer to calculate the extent when the layer is opened.
It is very slow for b... -
- the patch seems has been committed.
-
- the patch seems has been committed.
-
04:42 AM Bug report #9584: WMS GetFeatureInfo response in GML format is not correct
- I have fixed this bug in this pull request: https://github.com/qgis/QGIS/pull/1201
I have tested mapserver's GetFeat... -
-
- It was my local problem, GDAL installation was broken and GDAL data, which are used by QgsCoordinateReferenceSystem::...
-
- I agree
-
- How about changing the color red on the unselect icon to something else (yellow?), so the color red is reserved for p...
2014-02-19
-
- Still no luck here, without invert/ignore the map is "swapped".
-
11:25 PM Bug report #9606 (Closed): QWC fails silently if project doesn't have "service capabilities" checked
- Moved from #9605 as a server not a client issue.
If the project doesn't have "service capabilities" checked, QGIS se... -
- Hi Rhenriques, this pull (https://github.com/qgis/QGIS/pull/1071) (not merged) attempts to correct that behavior that...
-
- I'm paying attention to every single NB about this issue. Changes are not committed yet in the NB: f06457b. Changing ...
-
- Martin Dobias wrote:
> No, it fixes only wrong value in identify tool. I am not aware of any issue in field calculato... -
-
- Hi Martin, there is an issue commented in #9060-14 that I think fixed in https://github.com/qgis/QGIS/pull/1071
Ch... -
- No, it fixes only wrong value in identify tool. I am not aware of any issue in field calculator.
-
- Martin Dobias wrote:
> In case of any further issues please open a new bug as all the comments in this issue make it ... -
- In case of any further issues please open a new bug as all the comments in this issue make it hard to follow.
-
- Current state of measuring:
- ellipsoid "none" - consistently returning 2.520 km^2 (with project's CRS being EPSG:207... -
- Fixed in changeset commit:"7ea3390950be8232a9505438c428f5f0933ab1fb".
-
> Is this the problem or are there more cases to fix?
Hi Martin, I resume here what we discussed in private. Anyway...-
-
- Michel Proulx wrote:
> Problem solved.+ West of the Meridian line longitidude coordinates are negative+.
>
> I think... -
> Other problem occurs, Polynomial 2 transformation with 6 GCP is unable to process.
so this is the real issue, right?-
- Likely related: http://bugs.python.org/issue9377
-
- What is your system's hostname?
-
- Every time I open the attributes table I end up mixing these two buttons, because the icons are tool similar. It woul...
-
- Thank you for acknowledging the issue. I hope that it can be fixed in the next version. Actually, I would also hope t...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- Point symbols can be angled through Data Defined Properties, but this function does not work with Point Displacement....
-
- I cannot replicate anymore on the latest master, something has changed, for the better. Please reopen if I'm wrong.
-
- I cannot replicate anymore on the latest master, something has changed, for the better. Please reopen if I'm wrong.
-
- Confirmed on the latest version of processing and Linux.
-
- Confirmed on the latest version of processing and Linux.
-
- Confirmed on the latest version of processing and Linux.
-
08:19 AM Bug report #9603 (Closed): Error message with processing tool "Extract by location"
- Hi,
In the toolbox when using the tool "Extract by location" (QGIS Geoalgorithms > Vector selection tools) I have no ... -
- Markus Neteler - wrote:
> Giovanni Manghi wrote:
> > see "OSGeo4W !#388":http://trac.osgeo.org/osgeo4w/ticket/388
>
... -
- The first question is not really clear. Please rephrase it (the title as well) and I will reopen this ticket.
About ... -
- The first question is not really clear. Please rephrase it (the title as well) and I will reopen this ticket.
About ... -
- The ID in the list is different bacause probably it is an internal id for the feature, that is different in shapes an...
-
- The ID in the list is different bacause probably it is an internal id for the feature, that is different in shapes an...
-
- The ID in the list is different bacause probably it is an internal id for the feature, that is different in shapes an...
-
- Lowering the priority - should not block the release.
-
- Fixed in commit:63d84ec by Hugo
-
- Fixed in commit:63d84ec by Hugo
-
- submitted
https://github.com/qgis/QGIS/pull/1195 -
02:58 AM Bug report #9599: QGIS_PLUGINPATH option raise an error
- Thanks !!!!
-
- Ok, got it.
Each '\\' is doubled for python path inclusion, but we check if it exists AFTER doubling the '\\'.
On Win... -
- Yep, it works well in 2.0.1
Régis -
- Confirmed here.
btw, I think the correct message is "The extra plugin path '%1' does not exist".
It only raises when ... -
- Hi, I'm doing deploiement test here and found a blocker.
A error message is raised when using QGIS_PLUGINPATH variab... -
- Martin Dobias wrote:
> Actually, I have replicated the problem by chance while playing with #9060 on my self-compiled... -
- Fixed in changeset commit:"34f79cf1fff11bd3ac23548d0929a7e90e6d142d".
-
- This is only noticeable with point layers, because with other geometries it is almost impossible to "fix" the label a...
-
- See
http://goo.gl/ccHegM
and/or attached screencast -
- If your atlas has a fixed scale, when you change the scale in the preview it does not change the atlas, which is conf...
-
- Patrick Dunford wrote:
> 141 is the latest master.
ok, then it is solved for you or not? cheers! -
- 141 is the latest master.
-
- Ok looking at the code it seems that it's done different to the MS SQL provider. From the look of it it's still done...
-
- I'm not sure we're talking about the same thing (or maybe I'm mis-understanding how the internals work). The way it s...
-
- It's all done in a background thread though so it shouldn't block the UI, so you can have your cake an eat it too. L...
-
- > Yeah see but I don't think the issue is the checking the issue is that you can't load the layer until the check is ...
-
- Yes it does allow more then one geometry type, however if anyone does that they are dead to me :)
Taking the first s... -
- A further thought - does MS SQL allow multiple geometry types in the same column? I.e. mixing polygon, points etc, li...
-
- I have had this discussion with others as well. I guess I'm the kind of person that likes seeing the geometry type i...
-
- > The other option is the to have a geometry_columns query/table, which we have in the MS SQL and PostGIS providers. ...
-
- I just recently fixed (patched) this issue with the MS SQL driver. I just used the TOP 1 because just checking the f...
-
- Jukka Rahkonen wrote:
> I would prefer using MDSYS.ALL_SDO_GEOM_METADATA. QGIS user is not necessarily the same who c... -
- Radim, I've just compiled qgis with your commit in, and legend is acting like a charm, excellent. I think we can call...
-
- Radim, I've just compiled qgis with your commit in, and legend is acting like a charm, excellent. I think we can call...
-
- I have done better fix (fixing the real problem) in commit:7822abd.
Please test.
2014-02-18
-
12:58 AM Bug report #8991: nviz does not work (not found) in qgis 64bit osgeo4w
- Giovanni Manghi wrote:
> see "OSGeo4W !#388":http://trac.osgeo.org/osgeo4w/ticket/388
For the record, it has been cl... -
- Actually, I have replicated the problem by chance while playing with #9060 on my self-compiled build (not using debia...
-
- !! Yay !!
Martin, out of purely geeky curiosity, why was this not showing on self-compiled builds and showing on th... -
- Fixed in changeset commit:"5d4cf3086abe6bb205423771093cc5eebac6d5b8".
-
-
- I am getting quite confused by the discussion as there have been various issues mentioned.
Can you please clearly de... -
12:21 PM Bug report #9060: Area is wrong in QGIS master (again)
- IMHO, the correct solution would be that _both_ the measurement tools and the field calculation functions should obey...
-
- I am pretty sure this got fixed by commit:5d4cf3086 (same problem with randomly overwritten extent)
-
- I am pretty sure this got fixed by commit:5d4cf3086 (same problem with randomly overwritten extent)
-
- Richard, there's a serious ongoing issue with simplification that only manifests through debian-nightly packages (but...
-
- Gavin, I cannot reproduce this either (Debian self compiled QGIS of yesterday)
Loading your (latlon degrees) shapefi... -
12:15 PM Bug report #9581: linestrings not transforming on the fly
- Try the attached shapefile. If I load it with simplification on, it never draws when projected but if I load it with ...
-
- Gavin Fleming wrote:
> appears to be duplicate of #9360
as it happens for #9360 I'm really not able to replicate (us... -
- I noticed a few problems while adding embed layers or groups:
* if you add a layer which ID already exist in the proj... -
- I would prefer using MDSYS.ALL_SDO_GEOM_METADATA. QGIS user is not necessarily the same who created the table.
About... -
- Jürgen Fischer wrote:
> > because QGIS isn't trusting the USER_SDO_GEOM_METADATA.
>
> no, just because USER_SDO_GEOM... -
- > because QGIS isn't trusting the USER_SDO_GEOM_METADATA.
no, just because USER_SDO_GEOM_METADATA doesn't carry info... -
- When the "Only look in meta data table" checkbox is selected, QGIS should *only* use the MDSYS.USER_SDO_GEOM_METADATA...
-
01:18 PM Bug report #9597 (Closed): 2.1.0 revision c9a88c1 fails to export spatial information from polyli...
- Including:
GEOMETRY=AS_WKT
SEPARATOR=SEMICOLON
LINEFORMAT=CRLF
Into the Layer options in the CSV "save..as" dialog ... -
- Patrick Dunford wrote:
> At the moment I'm running 141 noplugins. Might try it tonight with plugins enabled.
the imp... -
- At the moment I'm running 141 noplugins. Might try it tonight with plugins enabled.
-
- Patrick Dunford wrote:
> Testing with the --noplugins option but haven't done enough on it yet to see if fixed. Haven... -
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > Matthias Kuhn wrote:
> > > Is this still an issue?
> > >
> > > L... -
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > Matthias Kuhn wrote:
> > > Is this still an issue?
> > >
> > > L... -
- Problem solved. West of the Meridian line longitidude coordinates are negative.
I think it is not clearly mentionned... -
09:54 AM Bug report #5848: Different icons for QGIS and QGIS Browser
- Icon based on magnifier icon of Larry.
-
- Here you have a fast workaround. The long-term solution should be implemented on the repository side, see: #9595
-
- Fixed in changeset commit:"88e8f9d6b6f05cbda44eea2c4d925170e82342eb".
-
- I am not sure the fix is OK. Basically each row in legend is a nucleon, group of nucleons is atom. Layer item is a nu...
-
- Fixed in changeset commit:"5cd53dd28ef44db7802d6d7bfa38227792483686".
-
- Confirmed, thanks.
-
- I found this discussion, that might help solving the problem.
http://www.gossamer-threads.com/lists/davical/general/... -
- Fixed in changeset commit:"580f3dc80d4bfba54438c2b6236a2d1e76914034".
-
- When a commit error is raised by the DBMS, the error is not correctly displayed in the message bar: %s (should be the...
-
- I've not been able to fully determine, that is a QGIS issue and not a Geoserver issue. For that reason, I'll close th...
-
- I'm currently having a look at this. Assigning to myself to avoid doubled up work.
-
- Hi Jürgen
As you seem to know the networking code of QGIS very well, could I get you to take a look at this? It's my... -
- When browsing to save the output shapefile of a tool, the browse dialogue box consistently takes several tens of seco...
-
-
- Not reproducable here, but commit:7f5aac30 might still fix it.
-
- Not reproducable here, but commit:7f5aac30 might still fix it.
-
- Fixed in changeset commit:"7f5aac30b1ab05cb901f2ea349a0badbef3d39ba".
-
- Hi,
Primary key choice list in postgis connection dialog does show much more field than real table or view has.
Good... -
- Currently when adding an Oracle layer QGIS performs a MBR check against the layer (SDO_TUNE.EXTENTS_OF). This hangs Q...
2014-02-17
-
12:48 AM Bug report #8979: Crashing WFS in 32bit Windows Install
- I can confirm that in the developer version QGIS code revision: 8f7c879 the issue is no longer present. Thanks, much ...
-
- * Add a PostGIS geographic layer (with SRID defined)
* Add a PostGIS table layer
-> This window appear: see attached... -
- include steps to reproduce please.
-
- When adding a geometry less table, the prompt to choose SRS transformation is opened.
-
- This fixes the worst part of the problem, i.e. that the expression is not saved when edited in the config dialog. I'l...
-
- This fixes the worst part of the problem, i.e. that the expression is not saved when edited in the config dialog. I'l...
-
- Fixed in changeset commit:"5e21c55d2b6358da0a8b61beb490ea0dd5f26a0c".
-
- The problem went away, this bug can be closed.
-
- I made some more investigation: the number of nodes created is not linked to the type of layer, but to the number of ...
-
07:00 PM Feature request #9587 (Closed): honor path from all sides - program and add on
- I think it is important to use the path based on 'favourites' (if set) as that is an active choise of mine and the co...
-
- I just tried the test cases in the GDAL tickets, they are correctly represented with QGis Master.
-
- I agree with Anita, the icon needs to be more discernible from desktop app icon, especially when at 24 x 24px. Howeve...
-
- I don't think v1 is the best option. In my opinion, the difference between the desktop and browser icon should be mor...
-
- Andreas, my suggestion:
If we use the icon v1 prototype we need to pick a color for the folders that is neutral for ... -
- My vote is for the version qgis_browser_icon_prototype_v1.svg - but with a change that the folders are in blue instea...
-
- My vote is for qgis_browser_icon_prototype_v6.svg
But anyone is ok for me. -
- Paolo Cavallini wrote:
> IMHO this should changed, as it is quite confusing for users.
and which one? two here, a ... -
- See:
https://drive.google.com/folderview?id=0B98hU-Ebn7VvX2lGTFRvWkdiX28&usp=sharing
IMHO this should changed, as i... -
- See:
https://drive.google.com/folderview?id=0B98hU-Ebn7VvX2lGTFRvWkdiX28&usp=sharing
IMHO this should changed, as i... -
- Hi, I have released a new pull request that attempts to correct this issue or as least show debug information:
https:... -
- Hi, sorry, these days I'm finding it impossible to look this issue for family reasons.
I will try to build QGIS as d... -
- affects me too (I added #9581 which is probably a duplicate of this). I did an update today so either the patch hasn'...
-
- Fixed in changeset commit:"b9b9bc31b3ba63b06def835dbb01772134661856".
-
06:11 AM Bug report #9580 (Closed): wrong geometry error detection with QGIS method
- Hi,
attached you find a small project with a polygon shape file. Using the "check geometry validity" tool from the f... -
- Fixed in changeset commit:"b9b9bc31b3ba63b06def835dbb01772134661856".
-
- Fixed in changeset commit:"b9b9bc31b3ba63b06def835dbb01772134661856".
-
- Fixed in changeset commit:"7becd761af05d3946e3c94017cffacf5ed72be4e".
-
06:07 AM Feature request #8709: Easier import of OSM data: bounding box
- The source of this bus is correctly identified in the comments on the duplicate Bug #9103. The OSM overpass-api requi...
-
- Fixed in changeset commit:"7c4c7e897e145eb38ea90be1bf8989e09bec698c".
-
- Jacob Madsen wrote:
> What do you mean? The problem was reproduced, but apparently it's intermediary. That I can't re... -
- Issue just occurred again today, still latest build. Minidump sent on WeTransfer.
-
- What do you mean? The problem was reproduced, but apparently it's intermediary. That I can't reproduce it now doesn't...
-
- Testing with the --noplugins option but haven't done enough on it yet to see if fixed. Haven't tried latest master (c...
-
- appears to be duplicate of #9360
-
- QGIS Master 2.2 (from debian-nightly). This has happened with linestrings from various sources (shapefile, gpx and po...
-
- Steps:
* Add a geometry less table (with some rows inside or add some)
* Enable 'show features count' with right clic... -
- XML elements of every particular feature (feature ID, geometry, bounding box and attributes) in GetFeatureInfo GML re...
-
- The dimensions of the identify form are not kept after resizing.
Steps:
* Select identify tool
* Click on a feature
... -
05:22 AM Bug report #8801 (Closed): QGIS fails to start when not in domain
- Home directory is on the network.
I have recently changed to a Windows 7 64bit platform - and there I can open QGIS ... -
- Could I get some feedback on this? Still reproduces from time to time on build commit:57dd877
-
- Hi all,
svg symbol (style tab for point shapefile) seems not to take care of the data defined properties (size, offse... -
- Fixed in changeset commit:"ef5ede169023e520bf6844c205b1fc8c06239329".
-
- On SAGA 2.10, Merge Shapes doesn't corrupt the encoding.
I also tried v.overlay from QGIS and it doesn't corrupt th...
2014-02-16
-
12:58 AM Bug report #9578: QGIS Crashes when incorrect plot style for programmatically created composer
- Attached is the minidump file
-
- Attached file is the template we used.
-
11:40 PM Bug report #9578 (Closed): QGIS Crashes when incorrect plot style for programmatically created c...
- This issue replaces #9562
We have been trying to track down the cause of a crash under windows. We use some code sim... -
12:44 AM Bug report #9500: Wrong list of "result entities ID" after a spatial query
- For me the importation works fine (there is a create database command).
I join an archive with shapefiles (and a scre... -
- Jean-Michel Follin wrote:
> Salvatore Larosa wrote:
> > works fine for me either 2.0.1 or master version.
> >
> > Pl... -
- Since I didn't have time to look at the triangulation code, I just upplied the patch now.
>An obvious choice can be ... -
- Ok after more testing we found that on windows the crash does not occur because of the unresolvable path. We are goin...
-
- Hi
I tried to upload the minidump in the original ticket but it seems to have been discarded when the ticket was sub... -
- Giovanni Manghi wrote:
> I'm not sure (still thinking) that the actual behavior is better for the user, but anyway if... -
- Jürgen Fischer wrote:
> The stored data is correct in both cases, isn't it?
yes.
I'm not sure (still thinking) tha... -
- Giovanni Manghi wrote:
> attached a screencast that shows the difference between qgis 1.8 and 2.0/master:
>
> in qgi... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > Jürgen Fischer wrote:
> > > Fixed in changeset commit:"48427e1877c... -
-
- Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > Is this still an issue?
> >
> > Looking at my earlier comments, I ... -
- Sorry - I'm on holidays for a couple of weeks and can't investigate this for 2.2. I'm happy to take a look after that...
-
-
- Seems also to me that something is wrong...
-
- Seems also to me that something is wrong...
-
- The dialog shows the message in the attached image
-
- closing for lack of feedback.
-
- closing for lack of feedback.
-
- Patrick Dunford wrote:
> OK so using 2,01 with the same project and layer files, editing a layer is instantaneous. So... -
- Here GCP file and orginal map.
-
- Michel Proulx wrote:
> Oginal map makes 180 Mo. I can't send it here.
>
> You're right what I get from georeferencer... -
- Oginal map makes 180 Mo. I can't send it here.
You're right what I get from georeferencer is flipped raster!? Flippe... -
- Michel Proulx wrote:
> Dear Giovanni
>
> What's mean and where to find GPC file?
>
> Here is attached final result.... -
- Dear Giovanni
What's mean and where to find GPC file?
Here is attached final result. -
- Dear Giovanni
What's mean and where to find GPC file?
Here is attached final result. -
- Hi, the description is not really clear. Can you add sample data (including the GPC file)? Maybe also a screenshot of...
-
- Hi, the description is not really clear. Can you add sample data (including the GPC file)? Maybe also a screenshot of...
-
- Hi, the description is not really clear. Can you add sample data (including the GPC file)? Maybe also a screenshot of...
-
- Hi, the description is not really clear. Can you add sample data (including the GPC file)? Maybe also a screenshot of...
-
- QGIS 1.8.0 and 2.0.1 when georeferencing topo and geological map, .jpg / tiff. formats; lon, lat originale coordinate...
-
- Correct!
-
- Rhenriques Henriques wrote:
> Just tested in NB, code revision "d26831b" and is not right yet. If the original shape ... -
- Rhenriques Henriques wrote:
> Just tested in NB, code revision "d26831b" and is not right yet. If the original shape ... -
- Rhenriques Henriques wrote:
> Just tested in NB, code revision "d26831b" and is not right yet. If the original shape ... -
- Closing for lack of feedback and as because it seems to be fine on master. Reopen if necessary.
-
- Closing for lack of feedback and as because it seems to be fine on master. Reopen if necessary.
-
- Filipe Dias wrote:
> Alexander Bruy wrote:
>
> > Seems the only possible way to get broken attributes is using "Syst... -
- Filipe Dias wrote:
> Alexander Bruy wrote:
>
> > Seems the only possible way to get broken attributes is using "Syst... -
- I usually get the same issue when in the table of attributes there is a column with a reserved/invalid name, like "de...
-
- Confirmed on master.
-
- Confirmed on master.
-
- Confirmed on master.
-
08:08 AM Bug report #9572 (Closed): legend of categorized renderer of layers with joins incorrect
- I have noticed a not correct display of categorized type legend using
joined fields.
If I use one of the joined field... -
- see also #9485
-
- duplicate of #9456
-
- duplicate of #9456
-
- Chars like "ã" or "ç" in the username are not an issue here on Windows 7 on both qgis 2 and master.
-
- Chars like "ã" or "ç" in the username are not an issue here on Windows 7 on both qgis 2 and master.
-
08:42 AM Bug report #9573 (Closed): hostnames with non-ascii characters cause python console to fail.
- Can't open Python consoler right after a clean install. This could be caused by my username in Windows which contains...
-
12:43 PM Bug report #9576 (Closed): SLD rule-based style export loses quotes around layer names
- When exporting a rule-based layer style to an sld file, any quotes in the rules are removed. If layers have hyphens i...
-
- I can replicate the problem in QGIS 2.0.1 (on linux), but not with QGIS master, so I assume this has been fixed in th...
-
- I can replicate the problem in QGIS 2.0.1 (on linux), but not with QGIS master, so I assume this has been fixed in th...
-
03:00 AM Bug report #9571 (Closed): Qgis crash when remove group of layers create with python
- hi after that i load many layers i run this code in python console...
-
- I think it would be useful to have a more concise way to specify multiple numerical ranges for a single rule when sty...
-
08:46 AM Feature request #9530: Show coordinated as grid codes
- Giovanni
Thanks for your interest in this.
No bother you closing this ticket.
Plenty more QGIS stuff for you to get i... -
- Geoff Owen wrote:
> Hello Giovanni.
> Thanks for getting involved.
> I think my suggestion would be useful but only f... -
- Geoff Owen wrote:
> Hello Giovanni.
> Thanks for getting involved.
> I think my suggestion would be useful but only f... -
- Fixed in changeset commit:"7f9a755f271a40c2e7864f7646cb5257d722d1ff".
-
- Jacob Madsen wrote:
> What more can I do to assist you in fixing this issue? All I can say at this point is, that I'v... -
- What more can I do to assist you in fixing this issue? All I can say at this point is, that I've seen this problem on...
-
- I'm on qgis master/ubuntu and it's weird because what I see is:
* for lines I see what you describe for polygons
* ... -
- I'm on qgis master/ubuntu and it's weird because what I see is:
* for lines I see what you describe for polygons
* ... -
- Cannot confirm here on QGIS master on Ubuntu.
-
- Cannot confirm here on QGIS master on Ubuntu.
-
- When you open the project:
First I click on Layer -> Properties, or double-click on the layer
Second I close the "P... -
- Fixed in changeset commit:"ba47c9feb62ecaa102d16eff8ac61363047e51f1".
-
2014-02-15
-
- Could you please attach the minidump file?
What happens on linux if the image does not exist? Crash or just no pictu... -
- Hello Giovanni.
Thanks for getting involved.
I think my suggestion would be useful but only for a very few users.
Mus... -
- Geoff Owen wrote:
> Hello
> Coordinates appear in canvas view at bottom of screen.(Please see attached screen shot 1)... -
- Geoff Owen wrote:
> Hello
> Coordinates appear in canvas view at bottom of screen.(Please see attached screen shot 1)... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > Jürgen Fischer wrote:
> > > Fixed in changeset commit:"48427e1877c... -
-
10:05 AM Bug report #9474: New vertices added to polygons break shape file topology
- Hi Martin,
Thanks for looking into this;
Indeed my sample file doesn't seem to reproduce the problem. I apologise fo... -
- Hi Martin,
Thanks for looking into this;
Indeed my sample file doesn't seem to reproduce the problem. I apologise fo... -
- I fail to see what is actually wrong there - OpenJUMP and QGIS seem to render the layers in the same way.
Maybe your... -
- Fixed in changeset commit:"edfce6897df0355bb2db1914dfe57c44e705a856".
-
- Fixed in changeset commit:"675746c2d7bdba0b7e3f15a3c96b5a5c2709a41f".
-
- To reproduce the bug:
* Enable the topological editing in the snapping options
* Using the nodetool, move a vertex o... -
- I often have to zoom in or out during edition, either to see a larger area or to place a point more precisely and avo...
-
- Martin Dobias wrote:
> Does it happen with PostGIS or SpatiaLite or both?
Hi Martin,
I tested only PostGIS. -
- QGIS was respecting the tile matrixes of the services, which matrix height and width were too small. The service was...
-
- QGIS was respecting the tile matrixes of the services, which matrix height and width were too small. The service was...
-
- Followup in commit:b5897c7 - now with no axis switch the map is rendered correctly, but with invert/ignore it is "swa...
-
- If there was an issue this is now fixed in qgis master. I tested on both Linux and Windows and you can add path to fo...
-
- If there was an issue this is now fixed in qgis master. I tested on both Linux and Windows and you can add path to fo...
-
- I ca replicate the issue (even with mush less edits with the reshape tool). What is worst is that in some case the to...
-
- Sample data/project (and a screencast in this case) would help a lot try replicate this issue on other computers.
-
- Sample data/project (and a screencast in this case) would help a lot try replicate this issue on other computers.
-
- Sample data/project (and a screencast in this case) would help a lot try replicate this issue on other computers.
-
- Sample data/project (and a screencast in this case) would help a lot try replicate this issue on other computers.
-
- closing this?
-
- closing for lack of feedback (and because it is most likely fixed).
-
- closing for lack of feedback (and because it is most likely fixed).
-
- I have tested again and I can't also replicate the issue anymore, please reopen if necessary.
-
- I have tested again and I can't also replicate the issue anymore, please reopen if necessary.
-
- Radim, I got something that seems to work OK, attaching the diff patch.
I've tested it using a bunch of layer item (...
2014-02-14
-
- If I re-enable the if ( currentLegendItem->style() != QgsComposerLegendStyle::Hidden ) condition, the legend's vertic...
-
- Radim, I think the problem might be located around line 837 of qgscomposerlegend.cpp and the commented out line 830: ...
-
- Fixed in changeset commit:"366daa7e3b71f1fe890cd961779a5548d3ad7b47".
-
- I have created a map composition with Atlas settings where the map scale is fixed to a certain value in 2.0.
When I ... -
- It doesn't happen with QGIS 32bit on Windows (at least on my machine)
-
- Also reproducable on Linux
-
- Also reproducable on Linux
-
- I'm not expert with SIP. I thought QgsFields were automatically casted to lists by the SIP wrapper, but I see that __...
-
- Giovanni Allegri wrote:
> Here you can find a test shapefile [1] and a tiny test script [2]. I've just tested it with... -
- PS: it's just a test. In general I do changes to the layers in an editing session. I just wanted to report two things...
-
- Here you can find a test shapefile [1] and a tiny test script [2]. I've just tested it with QGIS 64bit through the py...
-
- I can not reproduce this on Mac OS X 10.9 (haven't tested elsewhere).
Tim, there seems to be an issue with the **Cad... -
- Tim,
Even when the crash reporter dialog doesn't show up, the crash report should still written to your user logs. C... -
- Yes, I always use .PNG so Etienne's right. Sorry for closing the ticket.
-
- output format is saved in the lastSaveAsImageFilter user pref so default value has no effect once you select another ...
-
- Hi Filipe from what did you conclude that .PNG is now the default?
From a fresh rebuild from now, in
Menu -> Project... -
- In Menu ->File -> Save image .PNG is now the default.
-
- Giovanni Manghi wrote:
> Jürgen Fischer wrote:
> > Fixed in changeset commit:"48427e1877cdb762af14f31be85b984a490828e... -
- Hi, I proposed a slightly different change:
https://github.com/qgis/QGIS/pull/1037
Best Regards
Alvaro -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"48427e1877cdb762af14f31be85b984a490828e2".
it does not seems to w... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"48427e1877cdb762af14f31be85b984a490828e2".
it does not seems to w... -
- Martin Dobias wrote:
> I meant my old plugin :)
it seems equally slow (many seconds) with a couple hundred of tables... -
- Jacob Madsen wrote:
> I was unable to upload the minidump here (file too large apparently), so I've sent it to your e... -
- I was unable to upload the minidump here (file too large apparently), so I've sent it to your email using WeTransfer....
-
- Here is a minidump file generated by yesterday's crash (which I could no reproduce later). I really hope you can use ...
-
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
07:00 AM Bug report #9565 (Closed): Dxf2Shp converter plugin does not generate any output with the provide...
- I have attached the file and dump file. Unfortunately i don't know with what program to read the 24 megabytes crash m...
-
- tested again on Windows/master 32bit and the issue seems gone.
-
- tested again on Windows/master 32bit and the issue seems gone.
-
- Hi
Yes I can confirm they are enabled.
Regards
Tim -
- I am not able to add longlat (4326) WMS after commit:ba0a637. It seems that axis are somehow messed. I tried with all...
-
- Hello
Coordinates appear in canvas view at bottom of screen.(Please see attached screen shot 1).
Coordinates also app... -
- Hello
Coordinates appear in canvas view at bottom of screen.(Please see attached screen shot 1).
Coordinates also app... -
- Hi
I've not so far been able to reproduce this in build commit:57dd877, however I need a colleague to verify. He won... -
- Fixed in changeset commit:"24b0a6468937d195e87f1f2528c4d0f3f328eaf7".
-
- I can't replicate this. It may be OSX specific...? Can you test under a different platform?
2014-02-13
-
- Can you test using QgsComposition::renderPage() to export the pdf and confirm if this works correctly? renderPage set...
-
- Using master with a composer template which is loaded in python, the generated pdf includes the composer guides. Can ...
-
- We are making templates to be used by users on different operating systems. One of our templates has a north arrow im...
-
- Tim - can you confirm whether smart guides is enabled for this composition?
-
- Hi
I am reopening this issue - there are still cases where no inference lines are show. I am attaching a short scre... -
- Hi
I am reopening this issue - there are still cases where no inference lines are show. I am attaching a short scre... -
- Hi
I am reopening this issue - there are still cases where no inference lines are show. I am attaching a short scre... -
- Hi
I am reopening this issue - there are still cases where no inference lines are show. I am attaching a short scre... -
- I meant my old plugin :)
-
- Martin Dobias wrote:
> Giovanni, is there such problem with slowness also with PostGIS manager plugin?
do you refer ... -
- I have a template that I need to edit (using QGIS Master commit:dae8ea66a169db7539a08dc81d2ebe9dab789f37).
Although ... -
- Testing against commit:dae8ea66a169db7539a08dc81d2ebe9dab789f37 I can note that it is no longer guaranteed to get the...
-
- To replicate:
Using QGIS head on OSX
# Open QGIS
# Blank project
# New composer map (default for name)
# Close comp... -
- Giovanni Manghi wrote:
> As far I can see this is still an issue at least on osgeo4w 64bit
Fixed in OSGeo4W. -
- Giovanni Manghi wrote:
> As far I can see this is still an issue at least on osgeo4w 64bit
Fixed in OSGeo4W. -
- I'm closing this out - Martin Dobias has an implementation in a branch which will be merged post QGIS 2.2
-
- Closing this as old.
-
- please contact the author of the plugin: http://michaelminn.com/linux/mmqgis/
-
- please contact the author of the plugin: http://michaelminn.com/linux/mmqgis/
-
03:14 PM Bug report #9558 (Closed): MMQGIS: spatial join: 'QgsRasterDataProvider' object has no attribute ...
- Hi all.
Getting a bug in MMQGIS when trying to do a spatial join; the following code pops up as soon as I select spa... -
- Hi Martin,
Please see the attachment:
* bla_start.shp is the shape before modification
* bla_end.shp is the shape af... -
-
- Please attach your shapefile.
-
- Fixed in changeset commit:"dae8ea66a169db7539a08dc81d2ebe9dab789f37".
-
- duplicate of #8262
-
- I already reported it as #8262 but no news so far
-
- Don't know if this has been talked before. But I think it would be nice to have a "add feature" button in the digitiz...
-
- For now: the easiest would be to use a database which has support for "ON DELETE CASCADE"
This will open up a questi... -
- Changing to feature request.
-
- Changing to feature request.
-
-
-
-
-
-
-
-
-
- See also "OSGeo4W !#402":http://trac.osgeo.org/osgeo4w/ticket/402
-
- Donovan Cameron wrote:
> Sorry Giovanni - re-opened.
Why? This isn't a QGIS problem.
-
- Donovan Cameron wrote:
> Sorry Giovanni - re-opened.
Why? This isn't a QGIS problem.
-
- Sorry Giovanni - re-opened.
-
- Sorry Giovanni - re-opened.
-
- Hi Jacob. I've closed this ticket for now - please let the OSGeo4W package maintainers know of this issue at http://t...
-
- Hi Jacob. I've closed this ticket for now - please let the OSGeo4W package maintainers know of this issue at http://t...
-
- The OSGeo4w installer http://download.osgeo.org/osgeo4w/osgeo4w-setup-x86_64.exe is missing a Windows manifest, which...
-
-
- Martin Dobias wrote:
> After all, we do not need a perfect Delaunay triangulation for the interpolation - much more i... -
- I can confirm the issue, and probably is also the same cause of this #9151
-
- I can confirm the issue, and probably is also the same cause of this #9151
-
- Jürgen Fischer wrote:
> download is gone.
ouch, will try to recover that. -
- Geoff Owen wrote:
> Hello Leyan.
> Thanks for query.
> I will try to explain what I want to display but first will ne... -
- Geoff Owen wrote:
> Hello Leyan.
> Thanks for query.
> I will try to explain what I want to display but first will ne... -
- Geoff Owen wrote:
> Hello Leyan.
> Thanks for query.
> I will try to explain what I want to display but first will ne... -
- Please let the OSGeo4W package maintainers know about this - they should be able to fix it.
-
- Please let the OSGeo4W package maintainers know about this - they should be able to fix it.
-
- Jürgen Fischer wrote:
> Mathieu Pellerin - nIRV wrote:
> > I've just upgraded by system to ubuntu's upcoming trusty 1... -
- Jürgen Fischer wrote:
> Mathieu Pellerin - nIRV wrote:
> > I've just upgraded by system to ubuntu's upcoming trusty 1... -
- Mathieu Pellerin - nIRV wrote:
> I've just upgraded by system to ubuntu's upcoming trusty 14.04 system. The debian-ni... -
- I've just upgraded by system to ubuntu's upcoming trusty 14.04 system. The debian-nightly packages are still affected...
-
- Jacob Madsen wrote:
> No, it reproduced at will earlier today on completely fresh installs. The server is Geoserver 2... -
- No, it reproduced at will earlier today on completely fresh installs. The server is Geoserver 2.4.3, and the data com...
-
- Jacob Madsen wrote:
> I have uploaded 2 sample projects for this issue. The projects contain the exact same WFS refer... -
- Sent to your email, Jürgen. Thanks in advance.
-
- I have uploaded 2 sample projects for this issue. The projects contain the exact same WFS references. One is created ...
-
- I have uploaded 2 sample projects for this issue. The projects contain the exact same WFS references. One is created ...
-
- Sorry, but I can still reproduce this with build commit:57dd877. I create a WFS-project in QGIS x64, and when opening...
-
-
- Kay F. Jahnke wrote:
> I found the error: The definition of one of my CRSs was incomplete. The Proj4 string QGIS prov... -
- Can you provide more detail? Doesn't crash here.
-
- Fixed in changeset commit:"28fb634876ac411a2d3c27ae1fa259b77043596b".
-
- Fixed in changeset commit:"588d5f425f09039efbb7bd3172d2fc25b39a43d1".
-
- Thanks Martin.
Regards
Geoff -
- Fixed in changeset commit:"40b48849b527215f9a5e2c6216122cb33eb5a915".
-
- Thank you Nyall!
-
- Fixed in changeset commit:"9e948dfb2bca5f69835790e83247db444661580d".
-
- actually, I was wrong, issue also exists in Linux. I was running qgis from the directory where the .vrt and .csv file...
-
- Perhaps the difference is that the current directory is not set to that of the .vrt file in windows, whereas it is in...
-
- * html height: commit:2a4f104 - the dialog is opened before items are inserted, that should allow them to justify hei...
-
- Fixed in changeset commit:"8f829750a24162d046eeb09cdf80d922fd88f170".
2014-02-12
-
- Hi, explicitly setting datasource tag to <SrcDataSource relativeToVRT="1">cwbody.csv</SrcDataSource> does the trick....
-
- I confirm the issue on windows with qgis-dev, using osgeo4w 32 bit installer. ogrinfo can read both datasets, but qg...
-
- I confirm the issue on windows with qgis-dev, using osgeo4w 32 bit installer. ogrinfo can read both datasets, but qg...
-
- Works for me using both relative and absolute path in linux using 2.0.1 and (mostly) recent master, with this .csv fi...
-
- I assume the .csv and .vrt file are in the same directory?
Perhaps you are missing the relativeToVRT tag in SrcDataS... -
- Hi, I build here a vrt on a simple csv file, and QGIS opens it correctly only if I put a absolute file in datasource....
-
12:40 AM Bug report #9552 (Closed): Strange errors working with 10 digit real or integers
-
- When doing this calculation in field calculator on a shape file:
FromToStop = 100000 * From_stop + To_stop
results... -
-
- When doing this calculation in field calculator on a shape file:
FromToStop = 100000 * From_stop + To_stop
results... -
- When doing this calculation in field calculator on a shape file:
@FromToStop = 100000 * From_stop + To_stop@
result... -
-
- Oops, sorry. Here it is.
-
-
- No file attached.
-
- See the attached file
-
- Fixed in changeset commit:"c060164bca533db2398e527bdd792521ad4c3490".
-
- See https://github.com/qgis/QGIS/pull/1167
-
- See https://github.com/qgis/QGIS/pull/1167
-
- I'm marking this as a blocker as it's a regression from 2.0.
If a layer uses data defined colours, it's currently i... -
- When I initially expand an item in the browser panel tree which contains a lot of children, the vertical scrollbar of...
-
05:03 PM Feature request #9549 (Open): Delete feature and related records.
- It is cool that I can digitize a feature, then populate the child tables (as defined by QGIS Relations). But when I ...
-
- Fixed in changeset commit:"57dd8779acf0495088de4eca89fd5d0accc5e755".
-
- Since the recent change in syntax highlighting, it's impossible to retrieve columns or load a layer when "load as new...
-
- GML parser was fixed in commit:4d660d1.
You should now be able for example to query features, highlight geometry of ... -
- This is the output I have now:...
-
- 1) I have changed title from 'crashing' which was misleading to 'disappeares'.
2) Setting the height of QgsIdentifyR... -
- Hello Leyan.
Thanks for query.
I will try to explain what I want to display but first will need to explain how the gr... -
- download is gone.
-
- This is a feature request but it's also a bug. It's annoying to work with the composer when it gets de-centered. Mayb...
-
- Fixed in changeset commit:"9d379f0d1d1ad8e712c5bb449e5b0d44280fd635".
-
- When saving as DXF, the resulting file has no extension, so it is not visible from Browser, etc.
-
- probably also fixed in commit:8d7e61abd (Qt 4.7 apparently crashed when the end guard is used in iterator find). Ple...
-
- Fixed in changeset commit:"44885511ff71b2aa9f5b0648de331430313fd8e2".
-
-
- Fixed in changeset commit:"c64a051b1c716e5d34fc385b92ec7971ae8fec26".
-
- Raised a new ticket for that: #9546
-
- There is an increasing number of additional features in expression engine that make sense only in particular context....
-
- Deleting of columns in shapefiles depends on GDAL/OGR. GDAL/OGR 1.7 doesn't support removal of attribute from shapef...
-
- Deleting of columns in shapefiles depends on GDAL/OGR. GDAL/OGR 1.7 doesn't support removal of attribute from shapef...
-
05:18 AM Bug report #9545 (Closed): Delete attribute in layer properties fields for Shapefile
- Delete attribute function
in layer properties fields for Shapefile
Layer _ properties _ fields _ toggle editing mode ... -
- Fixed in changeset commit:"5bee17218db3576a6a172eec5ef6d555fc023b4d".
-
- Fixed in changeset commit:"a64610186173c0b274cebcc9a858efcd0680057c".
-
- fixed with commit:f3b26494
-
- I can replicate the issue in 2.0.1 with a field name with a dash ("a-b") but not with underscore ("a_b"). In QGIS mas...
-
- I can replicate the issue in 2.0.1 with a field name with a dash ("a-b") but not with underscore ("a_b"). In QGIS mas...
-
- Exactly the same problem as #5239
-
- Exactly the same problem as #5239
-
- Duplicate of #5239
-
- Duplicate of #5239
-
- The numerical stability issues are apparent especially in cases when points are forming rectangles, ending up swappin...
-
- provider side fixed in commit:3b438e22. Editing dates still requires support in the edit widgets (using the calendar...
2014-02-11
-
- Oracle time formats are mysterious, but it could be worth trying if setting "NLS_DATE_FORMAT" environment parameter w...
-
- The error is:
SQL: ORA-01843: not a valid month
Impossibile eseguire l'istruzione
Errore: INSERT INTO
"Q... -
- I agree with the solution. However, this should not be closed, as it is still an issue for the user. Better changing ...
-
-
- Not actually a bug in atlas - $rownum is only usable when in field calculator. The correct solution is to have contex...
-
- Not actually a bug in atlas - $rownum is only usable when in field calculator. The correct solution is to have contex...
-
- Not actually a bug in atlas - $rownum is only usable when in field calculator. The correct solution is to have contex...
-
- The current behavior is considered as the right one. If there is something in the keyboard, you are allowed to try pa...
-
- Supposedly a duplicate of #5239
When reporting bugs, please try to include more information: options you have used w... -
- Supposedly a duplicate of #5239
When reporting bugs, please try to include more information: options you have used w... -
- SO: Windows 7 (64-bit)
OSGeo4w (32-bit)
QGIS version 2.1.0-Master QGIS code revision f06e72e
Compiled against Qt 4.7... -
- Tested again with current master.
I noticed, that when _updating_ a column, the rollback is fast. But when I _add_ a... -
- If you create the same project with WFS layers in QGIS 32-bit, will it crash when reopened in QGIS 32-bit?
-
- Reproduces still in latest master
-
- Could I get some feedback on this issue please?
-
- Fixed in changeset commit:"9d7ef65a2dd4d5a4b07e37af01cff04146bca34e".
-
- Should this be at OSGeo4W trac for issues? Not sure if this is a QGIS issue.
http://trac.osgeo.org/osgeo4w/report/1 -
07:31 AM Bug report #9541 (Closed): QGIS package in osgeo4w missing shortcuts
- Just updated to qgis 2 with osgeo4w. Installer seemed to go fine, but no shortcuts were placed on the desktop or in s...
-
- f06e72e is from Feb, 8th where db29ebc is from Feb, 10th .. so I guess it is fixed ..
-
- Still reproduces in nightly from today, sorry. Build f06e72e
-
09:06 AM Bug report #9537 (Closed): global name not defined
- ok, there was some extra spaces in front of TARRAY which apparently had been eluding my eyes for the last 2 days! :/ ;)
-
- ok, there was some extra spaces in front of TARRAY which apparently had been eluding my eyes for the last 2 days! :/ ;)
-
- Hi.
I'm trying to use a plugin (ProcessingPermaclim provider), but with one of the scripts I get the error "global n... -
- Fixed in changeset commit:"684dd890a3359a2fb189b289b0bb65a42a9f4105".
-
06:10 AM Bug report #9266: QGIS gets stuck during on the fly reprojection
- Comment concerning use of shape files:
I experience the same problem using shapefiles relatively close to the North ... -
- Comment concerning use of shape files:
I experience the same problem using shapefiles relatively close to the North ... -
- Comment concerning use of shape files:
I experience the same problem using shapefiles relatively close to the North ... -
- Comment concerning use of shape files:
I experience the same problem using shapefiles relatively close to the North ... -
- Indeed. I have tested and the workaround works fine.
I noticed another issue though. In the referencing layer (child... -
- Indeed, this seems to be behaving strange... Will have a look at it sometime.
Please note that for the time being yo... -
- I have been doing tests with the new relations functionality. Trying to use the relation reference widget to edit my ...
-
- Giovanni, is there such problem with slowness also with PostGIS manager plugin?
I believe the main issue is with the... -
- Please file bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
- Please file bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
- Please file bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
04:44 AM Bug report #9540 (Closed): Numerical Vertex Edit Plugin error
- Numerical Vertex Edit 0.2.0 return an error when selection does not contain any point...
-
- This was taken into account when designing the low-level implementation of the relations functionality. However, the ...
-
- Fixed in changeset commit:"61ff7432107da0a7ce991f68094b9f42dd1027a5".
-
- I will have a look at Alex's patch...
-
- +1 for this. thanks.
-
- Paolo, the "slowdown" is a freeze of the application that leaves the user with the only option to kill QGIS (see the ...
-
- Maybe we should drop current implementation and use something another instead? For example QScintilla. I talked with ...
-
- -1: even on an Atom machine, the slowdown is acceptable, and the syntax colouring is a big plus.
If we remove it now,... -
- The SQL syntax highlighting is highly inefficient, involving more than a thousand of regular expressions being matche...
-
- This should be defined on the field and not on a widget IMO.
It is about the same level of abstraction as the domains... -
- Note: Such default values would conflict with the default values the data provider can deliver (eg. in postgres).
-
- It would be great if you could be able to set a standard value in the value map edit widget. This standard value shou...
-
- Does it happen with PostGIS or SpatiaLite or both?
-
- Alvaro Huarte wrote:
> Yes I built GQIS+master using the guide, it works fine. Then, why 'debian-nightly' not work?
... -
- Jürgen Fischer wrote:
> Alvaro Huarte wrote:
> > You are right, but I do not know how to solve it. I guess I should u... -
- OK so using 2,01 with the same project and layer files, editing a layer is instantaneous. So are the saves.
I'll giv... -
- What do you mean by alphanumeric format? Can you give an example of what you want to display?
2014-02-10
-
- did you try to call QgsAttributeTableModel::loadLayer() ? I reckon that should refresh the cache as well.
A refresh ... -
09:20 AM Feature request #9471: attribute table isn't refreshed after save
- > It can introduce a rather big overhead and is likely to actually miss events (e.g. a trigger updating a different l...
-
- See https://github.com/qgis/QGIS/pull/1159
-
- Hello,
If I have a Project with a Macro as shown below, and I set Settings->Options->Enable Macros to "Ask", the o... -
-
- closing for the lack of feedback.
-
- closing for the lack of feedback
-
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
-
- closing for the lack of feedback.
-
-
- Might be a duplicate of #8979. Could you verify that the problem is gone in current master.
-
- Might be a duplicate of #8979. Could you verify that the problem is gone in current master.
-
- Alvaro Huarte wrote:
> You are right, but I do not know how to solve it. I guess I should use QtCreator or Eclipse-CD... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, am I right in understanding that:
> - you cannot replicate the issue if you ... -
- Alvaro, am I right in understanding that:
- you cannot replicate the issue if you build QGIS yourself on Ubuntu 13.10... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the builds I use on my three machines with which I can replicate all the tim... -
- For the second problem I have raised a ticket in GDAL/OGR: http://trac.osgeo.org/gdal/ticket/5379
-
- Fixed in changeset commit:"e6c2ecd9f36e6b4924b08e185443e7eebbfb2467".
-
- Fixed in changeset commit:"85f6fb8b7121f7b41052feb1b4a9dcb8b528aaab".
-
- Fixed with commit:c9a88c147c20b09fd8b0287aafd9811ac314bbe0
-
- Fixed with commit:c9a88c147c20b09fd8b0287aafd9811ac314bbe0
-
- Fixed with commit:c9a88c147c20b09fd8b0287aafd9811ac314bbe0
-
- Fixed with commit:c9a88c147c20b09fd8b0287aafd9811ac314bbe0
-
12:29 PM Feature request #9533 (Open): Rotate feature
- The rotate feature is really nice. However I need a rotate that aligns an old map with multiple layers with a current...
-
- I am creating maps of a city with roads, buildings, lots etc. Snapping on 4. When using the node tool QGIS crashes qu...
-
- I am working on using QGIS to enter borehole data using QGIS Relations. It is a snap to create 1:1 and 1:N relations...
-
- Hi Patrick,
can you confirm that this also is the case when you disable ALL your plugins?
There have been some issu... -
- Reporting on the paste to the second layer, putting the second layer into edit mode required another 30 MB of memory....
-
- Reporting on the paste to the second layer, putting the second layer into edit mode required another 30 MB of memory....
-
- OK. So this is what happened. It took over an hour to put the layer into edit mode. And QGIS increased its memory usa...
-
- Can you confirm that on the same machine, the same files and operations are ok with qgis 2.0.1?
tagging as blocker ... -
- Can you confirm that on the same machine, the same files and operations are ok with qgis 2.0.1?
tagging as blocker ... -
- Can you confirm that on the same machine, the same files and operations are ok with qgis 2.0.1?
tagging as blocker ... -
- Can you confirm that on the same machine, the same files and operations are ok with qgis 2.0.1?
tagging as blocker ... -
- Since I updated to 2.1.0 dev (and also Windows 8.1) from 2.0 and Windows 8, I have noticed the layers I am working on...
-
- I create all my projects and add new layers using the 'EPSG:27700 OSGB 1936 British National Grid CRS'.
This currentl... -
-
-
- Fixed in changeset commit:"8d7e61abd2cc0c1e41eeb4b68fe96dc148997d13".
-
- #8068 has been closed. Does this issue can be closed ?
-
07:02 AM Feature request #9529 (Open): Set colors in a Column according to the applied symbology
- Hi,
Sometimes, it is nice to give labels the same color as the objets they refer to.
When there are too many classe... -
- I'm using QGIS on a windows based tablet with a touch sensitive screen for field surveying work. My work situation wo...
-
- Hi Carlo, I don't think that's the same issue. You might want to ask on the QGIS mailing list - http://www.qgis.org/e...
-
- I'd have thought this was a bug rather than a feature.
There's a + icon I can click which does stuff for other data t... -
- Fixed in changeset commit:"1dec7b09acdad0e571d626bbb6a453d1803edbb2".
-
- Matthias Kuhn wrote:
> I am not at home to test now but when I tested yesterday it seemed to me that the field calcu... -
- I am not at home to test now but when I tested yesterday it seemed to me that the field calculator is still faster t...
-
- Matthias Kuhn wrote:
> Jürgen Fischer wrote:
> > Not anymore. That was the case when the previous values were not st... -
- Ah, the form view and not the table view.
/me should read more carefully.
I will take care of this for 2.4 with the... -
- Jürgen Fischer wrote:
> Not anymore. That was the case when the previous values were not stored in the first undo co... -
- I often need to project single coordinate pairs (as in cs2cs or gdaltransform). I cannot find an equivalent in QGIS. ...
-
-
- Fixed in changeset commit:"5aa46cbeb30144a86d52cf26b7b176f8f523b876".
-
- If a plugin's author string contains a "&" character in metedata, installation from the plugin manager will fail.
I d... -
- Steps to reproduce:
* Use categorized, graduated or rule-based symbology on a vector layer
* Activate "Show Feature C...
2014-02-09
-
- Fixed in changeset commit:"c465c9f03d5e190e0aa1491943bdadb18716587e".
-
- Sounds reasonable. Nevertheless, I think this option should be added, as without it the user case described is seriou...
-
- Sounds reasonable. Nevertheless, I think this option should be added, as without it the user case described is seriou...
-
- OK, that's a good point. However I don't think the existing option for antialiasing in settings is the correct soluti...
-
- OK, that's a good point. However I don't think the existing option for antialiasing in settings is the correct soluti...
-
- OK, that's a good point. However I don't think the existing option for antialiasing in settings is the correct soluti...
-
04:44 AM Feature request #9281: [composer] add option to disable antialiasing when exporting compositions
- So it is definitively a bug because It donnot reproduce exactly what there is in the canvas.
The goal of composer is... -
- The antialiasing if no good for the black-white TIFF4 images.
In the tiff4 the main goal is have always only two col... -
- The main issue with the attached layer are the few huge geometries, especially the one with ID 26569 - with more than...
-
- The main issue with the attached layer are the few huge geometries, especially the one with ID 26569 - with more than...
-
- Since GEOS 3.1 there is support for some geometry operations on so called prepared geometries which can greatly impro...
-
- Some time ago the WKB handling has been updated to use memcpy, so it should be working now in master. Please reopen i...
-
- Some time ago the WKB handling has been updated to use memcpy, so it should be working now in master. Please reopen i...
-
- Some time ago the WKB handling has been updated to use memcpy, so it should be working now in master. Please reopen i...
-
- Fixed in changeset commit:"db29ebcffbc8a7b16331dd49da17f25662315e07".
-
- Fixed in changeset commit:"ac9eed7e052428722cd66ce0e39aee933c8176e6".
-
05:36 PM Bug report #9213: 'bad_alloc' error at QGIS start
- Pull request with the fix:
https://github.com/qgis/QGIS/pull/1157 -
- I found the source of the bug.
The QgisApp class defined in src/app/qgisapp.h and src/app/qgisapp.cpp has a data mem... -
- Matthias Kuhn wrote:
> It's not quite the same, as when doing changes the first time via the field calculator, one it... -
- It's not quite the same, as when doing changes the first time via the field calculator, one iterator is opened and lo...
-
- Salvatore Larosa wrote:
> For me it still not fixed. I am getting always a QGIS freezing on rollback action.
It's fa... -
- For me it still not fixed. I am getting always a QGIS freezing on rollback action.
-
- When applying a filter like bbox does not retrieve the features from a WFS data url.
Steps to reproduce:
* using thi... -
- I think so. Closing as duplicate.
-
- I think so. Closing as duplicate.
-
- duplicate of #9509?
-
- To reproduce:
* Open a layer with a big amount of features (...and with a slow backend)
* Start editing
* Open the f... -
08:55 AM Bug report #9079: Numeric scale error when print
- I can reproduce this behaviour. The output seems to have only 2/3 of the scale which is entered in the print composer...
-
- aperi2007 - wrote:
> But, I guess perhaps there some other code bug, because also thinking to a simple square root re... -
- Fixed in changeset commit:"71c1ad103364d3d83d02890e712b9dad442c9d08".
-
- Matthias Kuhn wrote:
> Please note that this also happens with the attribute table closed and should therefore be tre... -
- I noticed the same. This is due to the undo operation requesting all the features in single requests AFAICT.
Please ... -
- Fixed in changeset commit:"77a24cbeb44b4ecd48c469b85850025da246ae95".
-
- Closing for lack of feedback, probably does not affect recent versions.
-
- Closing for lack of feedback, probably does not affect recent versions.
-
- We need more details: does it happen with any project? E.g. does it crash if you save just empty project in windows a...
-
-
- I cannot replicate. Please try to add more details:
- does it happen also with other files, different geometry types?... -
- There is currently no possibility for a provider to push change-notifications back to QGIS. We would need a new API f...
-
03:49 AM Bug report #9507: QGIS crash when opening a HTML Map Tip with some mistakes
- You are right. I've tried on Ubuntu and it doesn't happen.
-
- Please don't file tickets for support requests - use the mailing lists.
-
- Please don't file tickets for support requests - use the mailing lists.
-
01:52 AM Feature request #9518 (Closed): ORACLE SPATIAL DATA CONNECTION
- Good morning,
I have a problem with the connection to the spatial data with oracle. When I go to test the connection... -
- Good morning,
I have a problem with the connection to the spatial data with oracle. When I go to test the connection... -
-
- duplicate of #6430
-
- Fixed in changeset commit:"f15c8869407c89cc771841d8ce218db01c435c7f".
2014-02-08
-
- Hm... a randomly occurring bug, and system dependent... could be some specific local problem. I am not sure if we can...
-
- Hm... a randomly occurring bug, and system dependent... could be some specific local problem. I am not sure if we can...
-
-
- Closing because of no feedback over 1 year. Please reopen if necessary.
-
-
- Just tested in NB, code revision "d26831b" and is not right yet. If the original shape CRS is used in the project def...
-
- Giovanni Manghi wrote:
> Alvaro Huarte wrote:
> > Hi Giovanni, the pull request 'https://github.com/qgis/QGIS/pull/10... -
- Alvaro Huarte wrote:
> Hi Giovanni, the pull request 'https://github.com/qgis/QGIS/pull/1071' has not yet been merged... -
- Hi Giovanni, the pull request 'https://github.com/qgis/QGIS/pull/1071' has not yet been merged.
Do you think that it ... -
- This seems really fixed to me. Please reopen if necessary.
-
- This seems really fixed to me. Please reopen if necessary.
-
- Think this should be a blocker, since it's a new feature which isn't working as expected.
I had a go at fixing it by... -
- Fixed in changeset commit:"133af645fe1017371424254c8ea80ba2b2660071".
-
- Fixed in changeset commit:"a9ac0d70f49663741aa70d03aaddc496a0b6e323".
-
- Fixed in changeset commit:"8d5862c8fd88ddd86c6ed748dbc3b40a1f975ac5".
-
- Some sql queries build the geometry column on-the-fly, but can still return a bounding box from a real table. The mos...
-
- Is this still the case? QGIS doesn't crash if a delimited text file is removed while qgis is running nor when a pro...
-
- Fixed in changeset commit:"d4043befcc9b92bc565563506bf2fbbb013aed43".
-
- The help for data-defined offset currently reads: <x>,<y>
To get this feature working, it seems to be necessary to re... -
- Fixed in changeset commit:"52616b6549bf43eee3cccc79f73aa890da5f3fab".
-
- Fixed in changeset commit:"48427e1877cdb762af14f31be85b984a490828e2".
-
- Fixed in changeset commit:"02409e9901356e07ef1f4e56c74d1685bc62e0ae".
-
- We're almost there, I still have to make the TopoViewer make the setExtent calls :)
-
- We're almost there, I still have to make the TopoViewer make the setExtent calls :)
-
- Fixed in changeset commit:"500116bfe337760a21a6c34ac16073eba5fefe40".
-
- Dropping the call from QgsVectorLayer::setDataProvider gets me the speed I was trying to obtain. Seconds vs. minutes.
-
- Extent seems to be called at VectorLayer initialization:...
-
- Reopening as it's still slow due to extent query :/
You'd need an few hundred thousand faces topology to tell...
If y... -
- Fixed in changeset commit:"370156148969b5e755f847ebb8c31eb1aad5c0f7".
-
- Reopening again, as the cast to typmod geometry does not provent core from checking again for the type, which makes t...
-
- Reopening again, as the cast to typmod geometry does not provent core from checking again for the type, which makes t...
-
- Reopening again, as the cast to typmod geometry does not provent core from checking again for the type, which makes t...
-
- Reopening again, as the cast to typmod geometry does not provent core from checking again for the type, which makes t...
-
- Fixed in changeset commit:"188b373bad4d18ca92a929f3ec611cba910f09b6".
-
- it looks like I broke the face layers, need to further debug this
-
- it looks like I broke the face layers, need to further debug this
-
- Fixed in changeset commit:"73b498674794be924bb1097c3edc23b966a58d8a".
-
- The Face geometries and Face centroid layers are views, on creation qgis scans them all to find out about their type ...
-
- Fixed in changeset commit:"4c87b0c123371b8a87a975746e8379643da97414".
-
- I made a mistake in calling QgsDataSourceURI.setDataSource from python and passing it 4 arguments instead of 5,
pract... -
- Fixed in changeset commit:"915f5c1a9644252934f0bc294e9c34cf703f8f30".
-
- Pull request here https://github.com/qgis/QGIS/pull/1150
-
- Pull request here https://github.com/qgis/QGIS/pull/1150
-
- Pull request here https://github.com/qgis/QGIS/pull/1150
-
- As a result one can not build an expression from another like it is done in QgsFeatureRequest::QgsFeatureRequest( con...
-
- Fixed in changeset commit:"00f623614a786364cb71232dbbcb3051c0d81581".
-
- Fixed in changeset commit:"417d49701770ab59938c3fcdc9f52d405f65d9ae".
-
-
> Have you tried it on a build that relies on saucy system packages? (Ie not with the ubuntugis packages)
no, I te... -
- Giovanni, seems closing this issue is right thing to do considering I appear to be the only one able to reproduce. Wi...
-
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the builds I use on my three machines with which I can replicate all the tim... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the builds I use on my three machines with which I can replicate all the tim... -
- not a application problem - but also not a redmine problem anymore - because we're using https to login there now.
-
- not a application problem - but also not a redmine problem anymore - because we're using https to login there now.
-
- Fixed in changeset commit:"6dd0cbe5425a3aaa84902cdb9a22ef17d8964cb5".
-
- I can't confirm this is a recent regression it's actually happening in 2.0.1 too!
-
- Related issue... doesn't this mean that any project saved by QGIS-2.0 will have 100% transparency style not honoured ?
-
- I noticed this with face_left, but I guess it also happens with face_right etc..
Also, when loading a TopoViewer, qgi... -
- Martin Dobias wrote:
> Works for me on linux (either case 1 and 2 work as expected)
Hi Martin, it does not happen on... -
- Martin Dobias wrote:
> Works for me on linux (either case 1 and 2 work as expected)
Hi Martin, it does not happen on... -
- Martin Dobias wrote:
> Works for me on linux (either case 1 and 2 work as expected)
Hi Martin, it does not happen on... -
- In the latest master code for qgis server seems that things are ok. I tested on both Linux (ubuntu) and Windows (osge...
-
- In the latest master code for qgis server seems that things are ok. I tested on both Linux (ubuntu) and Windows (osge...
-
- Fixed in changeset commit:"18fd4011677fc4c64e3543d20d7e0bb451bb285a".
-
- Confirmed as a regression since 1.8
-
- Confirmed as a regression since 1.8
-
- pull request merged in commit:3568fe761
-
- As far I can see this is still an issue at least on osgeo4w 64bit
-
- As far I can see this is still an issue at least on osgeo4w 64bit
-
- I suppose this only applies to Qt 4.7 (which OSGeo4W 32bit still uses)
-
- I suppose this only applies to Qt 4.7 (which OSGeo4W 32bit still uses)
-
- I can confirm that this was working as expected in QGIS 1.8 and does not on master.
-
- I can confirm that this was working as expected in QGIS 1.8 and does not on master.
-
- Jürgen Fischer wrote:
> Fixed in changeset commit:"a0fc024e76b9f40cff1bfde76e6dbf8111c7eb3a".
Use the native postgre... -
- Fixed in changeset commit:"a0fc024e76b9f40cff1bfde76e6dbf8111c7eb3a".
-
- Fixed in changeset commit:"7b45b40f96535469e4730713b8f38af6b48996a7".
-
- Looking at the code and the tooltip I concluded it was a miswording of the option.
This pull request corrects it:
ht... -
- Martin Dobias wrote:
> When I convert a layer to offline project, the primary key is preserved and I can keep update ... -
- Martin Dobias wrote:
> When I convert a layer to offline project, the primary key is preserved and I can keep update ... -
- hi, if i add to my project a layer in MSSQL server, and the features have field of type date , qgis views it as QSTR...
-
- fixed in commit:af65a0a2
-
- Perhaps user's home directory is configured to be not on the local disk but on some network resource.
-
-
-
2014-02-07
-
- I confirm this still happens in current master. It's with views having SRID=0 advertised in geometry_columns.
Running... -
- Alvaro, the builds I use on my three machines with which I can replicate all the time are builds offered via the qgis...
-
- Hi Mathieu, I successfully built QGIS master in Ubuntu 13.10 :-)
!Ubuntu1310_Issue9360.jpg!
I use VirtualBox in Wi... -
- I've now reproduced the random std::bad_alloc at startup bug. I think it's unrelated to the
std::bad_alloc on low RA... -
- Is this reproducible in current dev version? That code area has been changed significantly in 2.1 and I'm confident t...
-
- Is this actually a bug (ie string is untranslatable) or it's just missing in a particular translation?
-
- Try un-checking "Discourage labels from covering features" for the _lots_ layer, or for both layers. It is under Vect...
-
- Have you tried to upgrade "Processing" from the plugin installer?
I just tested v.dissolve with a shapefile and it ... -
- There is a "vector map not found" error when i try to execute dissolve tool. It doesn't work with both temporary and ...
-
- I don't think this is a bug - to me it's a feature. Why would you want to disable anti-aliasing when exporting a comp...
-
- I looked into GRASS and SAGA and both have the same problem, which means that in the FOSS GIS world, batch conversion...
-
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- This is a follow up of #9315
Open a fair large vector like http://idena.navarra.es/descargas/CARTO1_Lin_6CNivelD.zip... -
- Salvatore Larosa wrote:
> Hi Matthias,
> I just noticed that with large shapefiles (over ~70k features)
> when turn ... -
- Fixed in changeset commit:"10c15089d1735cec491ee0958b54b3fb0fad230d".
-
- Fixed in changeset commit:"8b8eb562f499c70b7be2001f4aec82b304d4ccfa".
-
07:57 AM Bug report #9030: WMS passwords stored in plaintext even if not chosen to
- When did the change in behaviour occur?
And no, this is not a case where the WMS URL itself contains the password. T... -
- Um, not reproducable in master (but I'm not aware that there was a change in behaviour since 2.0.1)
If you enter the... -
- There is no crash or data corruption, so I'm lowering the priority.
-
- When I convert a layer to offline project, the primary key is preserved and I can keep update attributes.
Maybe a sh... -
- Thank you for the feedback and sorry to reopen this bug.
It might well be that there are some parameters missing for... -
- without those parameters is normal that you get a shift.
-
- without those parameters is normal that you get a shift.
-
02:11 AM Bug report #9350: reprojected postgresql layers are plotted with offset and very slow
- I found the error: The definition of one of my CRSs was incomplete. The Proj4 string QGIS provided for EPSG:3003 was
... -
- About menu/sponsorship:
we already do a redirect so the link
http://qgis.org/en/sponsorship/donors.html
points to
... -
- Agreed is not crucial, but given that it takes so little to fix, and is so bad for our "marketing", why not fixing it...
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- closing for lack of feedback. Reopen of necessary.
-
- Works for me on linux (either case 1 and 2 work as expected)
-
- see also #5239
-
- should be duplicate of #8628
-
- works as expected in qgis 2.0.1
-
- works as expected in qgis 2.0.1
-
05:43 AM Bug report #8977: rulebased styling with a dash in the field name
- Giovanni Manghi wrote:
> There is no crash or data corruption, so I'm lowering the priority.
There is (configuration... -
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority also because there are alternatives in the process...
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- closing for lack of feedback, should be fixed.
-
- closing for lack of feedback, should be fixed.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- Fixed in changeset commit:"5a64215bd2bd6239a868a60c3f5c26ded518c61b".
-
-
- see #8174
-
- Sandro Santilli wrote:
> Is this duplicate of #2921 ?
yes, closed that too. -
- Hi,
I understand the explanation of simply square root not always right to resize a symbol.
But, I guess perhaps th... -
- Yay, thanks.
-
- Just adding filter item &geometry from the builder menu made crash for me.
-
- I can confirm the issue. On my machine the testing table (provided by Martin) doesn't work on latest master while wor...
-
- Salvatore Larosa wrote:
> works fine for me either 2.0.1 or master version.
>
> Please can you provide more info abo... -
- Fixed in changeset commit:"408e2b7a121e241ef859a95929245f13505d7442".
2014-02-06
-
- Fixed in changeset commit:"d0719b012f65fae1e715ff20626e658eb8452167".
-
- Is this duplicate of #2921 ?
-
- Fixed in changeset commit:"caf33b657f6c845779797c86e82fb5d71a28b6ee".
-
- Fixed in changeset commit:"f3166a5897340411738429b78bdb551f1ba28cae".
-
- I wrote a simple html code to display a Map Tip on a vector layer:...
-
12:18 AM Bug report #9501: QGIS crash on specifying filter for WFS layer.
- Indeed it should have been set to "Yes".
I overlooked the option when I made the issue - And now I seem to be unable ... -
- I confirm QGis crash with both queries. This ticket should have *"Causes crash or corruption"* set to "Yes", shouldn'...
-
- @intersects( $geometry, geomFromWKT( 'LINESTRING(709841 6187968,727061 6198617)')) causes a crash aswell@
-
- Running QGIS 2.0.1-Dufour desktop on windows XP 32bit
I'm connected to a WFS server (some topographical data in GML 2... -
- In an atlas composer:
1. Check "Hidden coverage layer"
2. Enable atlas preview
=> the layer is hidden on the main c... -
- Martin Dobias wrote:
> This should have nothing to do with geometry simplification. This is mainly about having those... -
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
-
- I still cannot confirm. Used this testing table and the line shows up in canvas:...
-
- hi if i create a tin on shape of curve line with 3d elevation it crash if i try with TIN interpolation
-
- You can delete the toolbar.
-
- python iface has a method addToolBar, to add a toolbar with buttons.
But there is no way to remove the toolbar.
I've... -
- works fine for me either 2.0.1 or master version.
Please can you provide more info about the problem ?
maybe adding ... -
- Paolo Cavallini wrote:
> Please add a more descriptive title
i want to update the title with something like "wrong l... -
- Please add a more descriptive title
-
- When i make a query with the spatial query plugin (intersection between 2 layers), the selected features correspond t...
-
11:44 AM Bug report #9503 (Closed): Fill patterns are clipped when exporting rotated composer to PDF
- In my composer I have a map with only a polygon shapefile layer. The map is rotated to 290 degrees. The polygon lay...
-
09:03 AM Bug report #9502: Reshape Tool quits working
- Also in QGIS version 2.1.0....
-
- When editing a polygon, the Reshape tool works for a while, about 20 edits, the stops working on that shape. It will ...
-
- Hi,
I took note that a similar issue had already been opened.
Here is a snapshot with and without simplification an... -
05:22 AM Bug report #5520: Wrong boundingbox values in GetCapabilities for empty layers
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- ramon . wrote:
> Still not sure if its the same bug, but tracks.zip file is giving this error on the mint terminal at... -
02:54 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
- Still not sure if its the same bug, but tracks.zip file is giving this error on the mint terminal at home:
ERROR 1: ... -
02:13 AM Bug report #9499 (Closed): path to external-svg-folder or storage of svg
- I tried to assign QGIS the path to my svg (in german: Layereigenschaften - Stil - Symbollayertyp is set to SVG-Markie...
-
- Upstream bug report: https://bugreports.qt-project.org/browse/QTBUG-36675
2014-02-05
-
- Alvaro - you might have run into the issue I describe here : http://nyalldawson.net/2013/04/building-qgis-on-ubuntu-1...
-
- Jürgen Fischer wrote:
> Alvaro Huarte wrote:
> > I am going to request help to qgis dev mailing list.
>
> Try to bui... -
- ramon . wrote:
> A couple of extra bits:
> 1. Alvaro, if you have a 64-bit install the python library is somewhere od... -
- Alvaro Huarte wrote:
> I am going to request help to qgis dev mailing list.
Try to build "packages":http://htmlprevi... -
- A couple of extra bits:
1. Alvaro, if you have a 64-bit install the python library is somewhere odd. Something /usr/l... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the log window doesn't throw any error message.
>
> Yes, please, try on lin... -
12:22 AM Bug report #9462 (Closed): layer.getFeatures on return the first feature
- in version 2.0.1 vector providers do not allow multiples iterators
[[https://issues.qgis.org/projects/quantum-gis/re... -
- I also have a problem with the on-the-fly reprojection, using QGIS 2.0.1 on a Kubuntu 12.04 system. Find attached a s...
-
09:20 PM Bug report #9482: Composer exporting to eps add its own extension .EPS
- I have. File->Export as image-> and select EPS
-
- How are you exporting to EPS? I don't have any choice of EPS export from composer...
-
- Marking as blocker since it's a regression.
In 2.0, the user could do this:
- Empty layer title string, which would ... -
- The fix here appears to be simple: when a layer title type is set to hidden, the vertical spacing value above the (fi...
-
- A regression slipped into QGIS master with regards to composer legend item's vertical spacing of layers set to hidden...
-
04:43 PM Bug report #9497 (Closed): Hide the UUID from the composer items
- Hi !
Some time ago, we introduced UUID for composer items.
Those are useful for plugin since they allow to identify ... -
- Fixed in changeset commit:"22346cd3c7c4c670a26ae1e606f8b0a6d9a0a0a4".
-
02:57 PM Bug report #9460: gdaltools relies on gdalinfo for raster SRS and extent, should use python API
- Merged, thanks Etienne.
-
- Fixed in changeset commit:"58faa5b4ad113860e798f2b5fdeb0741bb864e09".
-
Memory usage doesn't really 'grow' to ~880 MiB; QGIS is simply unable to allocate if it doesn't have that much virt...-
- Yeah, PointOnSurface could be an alternative to centroid - it would be good to try it out and have a comparison!
-
- I was doing a print on an A1 layout for Jakarta using Atlas export as pdf option. I am pleased to say I just tested a...
-
- Yes Martin, I used postgis LINESTRINGM data. In current Master, they are displayed correctly.
However, I had also MU... -
- I cannot replicate with a LINESTRINGM shapefile. Did you use a shapefile or PostGIS or something else? Please attach ...
-
- In QGIS Master I open a QGIS 2.0 project and most of the layers do not draw. They render perfectly in QGIS 2.0 but no...
-
- Seems to be fixed now. (using 5192e8d)
I'll re-open if it happens again. -
- just as a note: on ubuntu you have to install python-qt4-dev package to solve this problem
-
- Hi Etienne,
Don't get me wrong, the current implementation is good for power users, but most users aren't that techni... -
- Etienne Tourigny wrote:
> You should link here the new issues you created (as "Related issues")
They didn't seem per... -
01:18 AM Feature request #7058: Snapping priority - Prioritise vertices over lines
- This method would be really useful for many plugins.
2014-02-04
-
-
- Probably duplicates #7981
-
- This is better done with a download (upload) web application,similar to the plugin one.
Some interesting set:
* http... -
- Taking from duplicate:
This is better done with a download (upload) web application,similar to the plugin one.
Some ... -
- See also #9495
-
- AFAIK this has been implemented. Please reopen if necessary
-
- AFAIK this has been implemented. Please reopen if necessary
-
03:54 PM Bug report #9213: 'bad_alloc' error at QGIS start
- Tests with latest master has shown that QGIS will throw bad_alloc error when there is less than 880 MiB of virtual me...
-
- mathieu rajerison wrote:
> I am under QGIS Dufour and I can not see none of these options.
>
> In layer properties, ... -
- This relates to #9456
-
- I am under QGIS Dufour and I can not see none of these options.
In layer properties, does rendering refer to "Style"... -
- This may be due because "simplification" of geometries is enabled.
You can disable it -> Layer properties -> Renderi... -
- Line offset in symbology is useful when you have a network with several lines superimposing with others.
But it gene... -
- see my implementation here with commit "browser dock: add normal syntax (with wildcards at begin and end) and case in...
-
- Hi,
when I implemented the filter functionality I did things as simple as possible, using QT's QRegexp [1] class wit... -
- There are a number of simple improvements that I believe can be made to the Browser filter function to make it more u...
-
- You should link here the new issues you created (as "Related issues")
-
- To be entirely honest I wasn't really even aware that the Browser had this functionality. Looking at it now it's quit...
-
- +1 for making _Offset from Centroid_ the default. That just makes sense for polygons, -possible even for points-. Thi...
-
- I also find the wording confusing, I would expect "around centroid" place it right on the centroid, which "offset fro...
-
- @martin Ah yes that gives me better output thanks!
-
- > More obviously a bug - the only part of the WMS layer Metadata screen that's populated is the "properties". This co...
-
- Note - also seems like it should be removed from the "Browser" layer-properties too.
-
- Removing is seems like an idea, at least as long as it doesn't mean anything to the user.
Adding a layer-source that ... -
- I have a number of OGC services set up and accessible via the Browser.
If I right-click on the name of a service for... -
- 1) Add this WMTS service:
http://maps.warwickshire.gov.uk/gs/gwc/service/wmts?service=WMTS
2) Connect using the usua... -
- okay Mathieu.
I had checked before posting but searched for "rounded" but not "round" word. So I hadn't seen the prev... -
- Hi Mathieu, this is Mathieu :)
See a recent issue I filed on this: #9479
Maybe this could be closed as duplicate of... -
- If you want some rounded frames in the composer, you have to import an SVG or an image of it.
It would be nice to ap... -
- Just a small update on the above. I think there's both an issue and a feature request at play here :)
The issue: the... -
- See #9481 for details.
-
- Hi !
I frequently encounter the following bug : depending on other layer's visibility, some labels (of polyline laye... -
04:38 AM Bug report #9489 (Closed): Copy/Paste issue with explicit primary keys
- Copy/paste from a shapefile to a Postgis table with explicit primary keys is no longer possible with QGis 2.0
(Explic... -
- The 2.2 announces gradient fills for objects.
The drop shadows can be applied to labels.
They can be useful to enha... -
- In the composer, the edit button is close to the delete button so that it can lead to delete a layer label instead of...
2014-02-03
-
- Related pull was merged:
https://github.com/qgis/QGIS/pull/1125 -
- Related pull was merged:
https://github.com/qgis/QGIS/pull/1125 -
- There is also "offset from centroid" option which does what you would expect - the labels are then positioned so that...
-
- When labelling polygons, using 'around centroid' the label placement uses the bottom left of the label instead of the...
-
- Doesn't QGIS come with GEOS? It could be worth having a try if label placement would look better by using GEOS PointO...
-
- There is something called Distance Transform that computes distance from each point to the border. We could probably ...
-
- When labelling polygons the label placement is often suboptimal. I am attaching a contrived example which illustrates...
-
- Fixed in 78ecef6f2a476043516eede1d3a8504481fc1e22
-
- Fixed in changeset commit:"78ecef6f2a476043516eede1d3a8504481fc1e22".
-
- Fixed in changeset commit:"10947f796c24f3c63c10b714d39dd876a5cce8c9".
-
- Translating help files in GUI is always the most painful part, and I am convinced it
is not the most useful one, as ... -
- with this patch, QGIS will try to see if there are geometric features in the clipboard every time it changes.
So as s... -
- Denis Rouzaud wrote:
> This will output GEOS every time there is a new copy which is not made of WKT strings.
This i... -
- Exporting an image from map composer add its own extension .EPS to the file name. This behaviour is not present for o...
-
- In iterator loop, I call layer.dataProvider().changeAttributeValues({ feature.id() : attrs })
when I comment this lin... -
- I got an error : Error while updating internal statistics
-
- NOTE: backported to 2.0 branch with commit:673406d271fbc54071c3cc8835fb1279e4ebe719 and commit:f8028087ad533307774c7...
-
- NOTE: backported to 2.0 branch with commit:673406d271fbc54071c3cc8835fb1279e4ebe719 and commit:f8028087ad533307774c7...
-
- Fixed in changeset commit:"da4c4292374d049fde2c238a20a0b726ee9cf48d".
-
- Sorry for the noise, the version string is extracted using "postgis_version()", not "postgis_full_version()", so can'...
-
- Like this (will test after lunch):...
-
- Besides, may I suggest to look at the "TOPOLOGY" label in output from postgis_full_version() instead ?
-
- Found the bug, is in the function checking for topology support:
+ QgsPostgresResult result = PQexec( "SELECT cou... -
- Sorry but I cannot confirm the fix. Could be a problem on my side but as of f45e112 I still see the error:...
-
- QGIS is great, and its composer rocks; however, the current frame join style isn't great (see attached map frame), it...
Also available in: Atom