Activity
From 2012-06-26 to 2012-07-25
2012-07-25
-
10:29 PM Bug report #5813 (Closed): cannot load postgis layers from sde database
- Wouter Boasson wrote:
> Excellent! It is working again, the combination of 'estimated metadata' and 'geometry_columns... -
- Wouter Boasson wrote:
> Excellent! It is working again, the combination of 'estimated metadata' and 'geometry_columns... -
09:56 AM Bug report #6097 (Closed): Getting wrong attribute values from a feature in qgis
- This scenario shows the bug:
I make two polylines features(in my example both consists of two points) with the add fe... -
09:54 AM Bug report #6096: Negative values are classified incorrectly using new symbology
- Giovanni Manghi wrote:
> Can you check if this is a regression since 1.7.4?
Short answer: no. I never upgraded from ... -
09:35 AM Bug report #6096 (Feedback): Negative values are classified incorrectly using new symbology
- Can you check if this is a regression since 1.7.4?
-
- Can you check if this is a regression since 1.7.4?
-
- In the new symbology mode, at least in 1.8.0, several classification modes render negative real values as though they...
-
09:45 AM Bug report #5954 (Resolved): v.distance does not list existing columns, possibly broken?
- fixed in r309. I have splitted the algorithm, since one of the params only applies when using the to_attr option
2012-07-24
-
01:43 AM Bug report #4303: Plugin installer: error if high-ASCII in path
- Still doesn't work in the 1.8.0 version (and MASTER version)
-
02:50 PM Feature request #6091 (Closed): Add a "recent used" expressions list in field calculator
- Subject says it all!
-
01:21 PM Bug report #4076: Hanging on trying to use --snapshot option from command line
- Today, I tried to generate snapshots on two different computers, both with Windows XP and QGIS 1.8.0 installed. On bo...
-
10:55 AM Bug report #4317: New labeling: rotation for polygons is only applied after moving the label + th...
- In the old labeling engine, it is possible to set the rotation field without having x and y fields in the attribute t...
-
05:50 AM Bug report #4317: New labeling: rotation for polygons is only applied after moving the label + th...
- Giovanni, the new Freeze/Thaw label tool will handle the need for populating the attribute tables with x, y and rotat...
-
08:21 AM Bug report #6085: Composer does not maintain state of render preview and page zoom
- This is a problem on gnome, the composer does not receive a show event when visible (because to make project loading ...
-
03:47 AM Feature request #6088 (Open): Allow selected rows only when running the Interpolation plugin
- no data rows influence the interpolation result. In some cases there are data points that have NULL values that shou...
2012-07-23
-
12:40 AM Bug report #4426: Add a number_format() function to the QgsExpression
- Nathan, loving all of the new functions you've recently added in the expression builder. The CASE / CASE ELSE additio...
-
01:03 PM Bug report #6085 (Closed): Composer does not maintain state of render preview and page zoom
- If I save a composer, close the project and then open it again, it forgets the settings for render preview - cache.
I... -
- seems duplicate of #4806 (?)
-
06:43 AM Bug report #6084 (Closed): Raster Min Max Value Error
- I start my analysis with a raster (GeoTIFF) that derives from SAGA Kernel Density tools (min:5.37148e-11 max: 0.07829...
-
06:27 AM Bug report #6082: QGis download Malicious Virus check result
- Like all antivirus sites, it is quite vague about what maliciousness is present, but it reports 2 warnings.
One for t... -
- Dieter De Paepe wrote:
> You misunderstand, it is the site garyshood.com itself that is being reported as malicious b... -
- You misunderstand, it is the site garyshood.com itself that is being reported as malicious by Trendmicro, not the ins...
-
- probably false positive: http://www.garyshood.com/virus/results.php?r=dea6d81b0f15768d7ccca95f1b5f9e18
-
- probably false positive: http://www.garyshood.com/virus/results.php?r=dea6d81b0f15768d7ccca95f1b5f9e18
-
- This is not a bug per se, but it felt important enough to report.
The "Virus check results" link found on the "downl... -
- When editing a shapefile containing edges, the resulting datastore cannot be read completely by the Geotools java lib...
-
- Maxim, can you confirm if in your case it is a matter of having labels enabled or not?
-
- Maxim, can you confirm if in your case it is a matter of having labels enabled or not?
-
2012-07-22
-
01:03 AM Feature request #6081: Allow manually change project CRS from project properties when OTFR is OFF
- Sorry for the typo in the title: "preocious" -> "previous"
-
- It's not easy to explain :)
I have EPSG:4326 as default CRS, with OTFR activated. I change the CRS (e.g. select EPSG:... -
- fixed in commit:d66c3072
-
- fixed in commit:d66c3072
-
- fixed in commit:d66c3072
-
- fixed in commit:d66c3072
-
- Fixed in changeset commit:"d66c3072a8e15db20cb47fd1bf8dfe540d6ce31e".
-
- Fixed in changeset commit:"d66c3072a8e15db20cb47fd1bf8dfe540d6ce31e".
-
- Agus,
See if you can just change the title a bit for the issue. I tested on 10.7.4 with Kyngchaos.com 1.8.0-2 and co... -
- implemented in commit:fe4026a
-
- implemented in commit:fe4026a
-
06:40 AM Feature request #6080 (Closed): The Feature_Count param should be greater than zero
- On qgis-dev,
the WMS provider allow to define the feature_count as the max number of information retrieval with a Get... -
04:14 AM Bug report #4211: Enhancement: make "actions" tab more consistent and less confusing
- I agree the action UI still feels cluttered. I like New_mockup_1 the most as it is a clean and removes the cluttered...
-
- Fixed in changeset commit:"7a9074f8fc7c708019de90ca546aa68ca9508177".
2012-07-21
-
- I have the same problem when I try to generate snapshots of a series of vector maps from a batch file (and also with ...
-
01:14 AM Bug report #6078: QGIS 1.8 crashes upon exit on Mac OS 10.7.4
- Unselecting OfflineEditing in Plugins/Manage Plugins solves the problem.
Confirmed that selecting it again causes the... -
- alobo, *please give more details*. From the crash report it looks like you were using the 'Offline Editing' plugin. C...
-
- QGIS 1.8 crashes upon exit on Mac OS 10.7.4
crash report attached -
- Hi,
I guess the field calculator are two useful function that actually miss from field-calculator.
I know there is s... -
08:22 AM Bug report #5155: memory layer attribute fields are combined when a memory layer or columns in a ...
- But the issues occur when using built-in features of QGIS, not when using the plugin.
-
04:01 AM Bug report #5155: memory layer attribute fields are combined when a memory layer or columns in a ...
- Maybe it does not identify correctly layers (not using id but name for example.. )
2012-07-20
-
05:58 AM Bug report #2947 (Reopened): GRASS plugin mapset permission blocks use if user doesn't own PERMANENT
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- > I tried to reproduce with new memory layers from "new memory layer plugin" and I could not reproduce
Ah, yes. I d... -
- I tried to reproduce with new memory layers from "new memory layer plugin" and I could not reproduce. Could this be a...
-
- with empty tables that don't have a specific geometry type and/or you have to specify the expected geometry type with...
-
- with empty tables that don't have a specific geometry type and/or you have to specify the expected geometry type with...
-
04:17 AM Bug report #6074 (Closed): Using QgsDataSourceURI to load a PostGIS table causes error if query r...
- I am using the following code to load a vector layer from a PostGIS table:...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
02:57 AM Bug report #6072 (Closed): QGIS Master crashes when adding a raster from a GRASS Mapset
- QGIS-dev crashes everytime I try to add a raster map from any Mapset. (tried with 5 different Mapsets and Locations t...
-
- Patch supplied only deals with WIN32. SInce we Have Win 64 also, is that patch OK for all windows versions?
2012-07-19
-
11:10 PM Bug report #6071: Projection EPSG: 3909 isn't available in projections database
- WKT Specification for MGI 1901 / Balkans zone 7
http://georepository.com/crs/wkt/id/3909
-
- Projection EPSG: 3909 isn't available in projections database. Same projection is available vio OSGEO4W shell with gd...
-
- with new version of Qgis 'Master' I have an similar error with message as in in atachment( also error with qgis_core....
-
- Click on the button "Add values from display" to transparent pixellist, Qgis lost focus as the active program.
Return... -
08:57 AM Bug report #6068 (Closed): User speficied settings not portable with [--configpath] boot option u...
- There seems to be a bug with the [--configpath] boot option when porting QGIS 1.8 to a flash drive. QGIS can be start...
-
07:19 AM Bug report #6065: labelling font size selector does not work plus the size always revert to 8
- reproduced the issue with QGIS sample data (grassland.shp)
additional windows info:
> windows 7 professional, servi... -
- Can't confirm on Linux Mint, Windows 7, or Windows 8
-
- This issue is similar to #4981 in 1.7.4.
In labelling, the size of the font can be selected in two places, in the "l... -
- Slight improvement again.
Note: this is kind of modelled on the symbol properties dialog, so if that changed signific... -
- On another note, there's an inconsistency that in other parts of the gui a "..." button is used to open the expressio...
-
- Fixed for composer map id in b299e0893c84eccc66116c898f2508eb9adc8b6e including unit test.
For the sting ids, it curr...
2012-07-18
-
- slightly better version
-
- > it's partially fixed.
For the benefit of future readers: the more confusing aspects of this dialog have been elim... -
- > it's partially fixed.
For the benefit of future readers: the more confusing aspects of this dialog have been elim... -
- Fixed in changeset commit:"cb1e7d3f6b0864d1b448b52e7ccb49faaad20f63".
-
05:07 AM Bug report #6060 (Closed): QGIS 1.8 Split Features doesn't work as in 1.7
- Hi,
I have a postgres table of lines (see attachment).
In QGIS 1.7 I can split them perfectly.
In QGIS 1.8 I can d... -
09:03 AM Feature request #6064 (Open): define new or edit existing colorbrewer schemes
- Hi,
to define new colorbrewer schemes, like Spectral, Set2, etc it is currently necessary to edit /src/core/symbolog... -
08:11 AM Bug report #6063 (Closed): ftools "Convex hull(s)": wrong attributes in output
- When creating convex hulls from a point layer (.shp) based on a common attribute ("create convex hulls based on input...
-
- Do this:
* select a map on composer
* ctrl-c
* ctrl-v
Add a new map and set try to set it as an overview map. You w... -
06:35 AM Bug report #6056: Cannot load WCS layers
- To clarify: the gvSIG test was without authentication. As far as I know gvSIG does not support authentication.
2012-07-17
-
12:46 AM Feature request #5561 (Closed): Project Scale List
- Available starting from commit:fe2252de5e
-
- Available starting from commit:fe2252de5e
-
-
12:22 AM Bug report #6057: QGIS 1.8 Encoding problem with Bulgarian characters CP1251
- QGIS build from NextGIS (http://nextgis.ru/en/nextgis-qgis/) works correctly.
-
-
- Seems duplicates #5255
-
- With new QGIS version - 1.8 all Bulgarian users have a problem to read attribute data encoded with Bulgarian characte...
-
03:11 PM Bug report #6036: sub-menu item is sometimes not avalaible
- I'm using unity 3D. I'm off this week but I'll try with unity-2d later and let you know
-
01:24 PM Feature request #6059 (Closed): add the ability to select character code when creating a new shap...
- When creating new shape file, we can't select character code set.
We must create all new files in the UTF-8 .
There ... -
12:14 PM Bug report #6058 (Closed): GPS Tools freeze QGIS
- I'm trying to download data from a Garmin GPSMAP 60CS with the GPS Tools and I'm faced with a strange and erratic beh...
-
09:41 AM Bug report #5269: New fields created by "table join" are limited to 80 characters when it should ...
- This bug remains in QGIS 1.8 and think it's urgent to fix it.
-
- This bug remains in QGIS 1.8 and think it's urgent to fix it.
-
- I have also seen this issue using Mapserver. If I remove authentication (basic http auth) it works as expected.
-
- I have also seen this issue using Mapserver. If I remove authentication (basic http auth) it works as expected.
-
- I have also seen this issue using Mapserver. If I remove authentication (basic http auth) it works as expected.
-
- When trying to load WCS layers from the server, I always get the "The layer is not a valid layer and can not be added...
-
03:02 AM Bug report #6054: QGIS 1.8 doesn't warn about unsaved changes in layers on exit anymore
- Yes, it's a regression. QGIS <= 1.7 used to warn at exit, if there were any unsaved changes in layers (I mean the lay...
-
- Hi Borys, is this a regression? If yes please tag the ticket as blocker.
2012-07-16
-
- The title is self-explaining
-
- Fixed in changeset commit:"e13946f53df420f2dda3644d6ca84477bcb61f6b".
-
- One of the startup tips says this (src\\app\\qgstipfactory.cpp):
@ myTip.setContent( tr( "Quantum GIS is open sourc... -
- Alister Hood wrote:
> Do you guys really still have this problem?
> It works fine for me now (in trunk on Windows).
... -
- Alister Hood wrote:
> Interestingly, in the samples I attached here, the PDF colours weren't as bright as they should... -
09:43 AM Bug report #6052 (Closed): QGIS 1.8 crashes on startup on OpenSUSE 12.1 64 bit
- Since the update to QGIS 1.8, QGIS no longer starts. The splash screen appears and then disappears, and the QGIS proc...
-
08:29 AM Feature request #5725: Make v.* modules corresponding to those in GRASS plugin
- Hi,
I think v.Kernel is an important module to implement for Sextante.
Currently, the only way to make a kernel dens... -
06:05 AM Feature request #5899: Duplicate layer
- Sorry, I've misunderstood the subject. The previous code adds to the map the +same+ sublayer.
It's difficult to do i... -
- In the meantime, select the vector layer then open the QGis python console and run:...
-
- are you using unity 3d? can you test with unity 2d or even better with another desktop manager?
-
- Just tested with master (ecaade2) and seems all fine.
-
- Just tested with master (ecaade2) and seems all fine.
2012-07-15
-
- I remember I was able to reproduce it, but not now...
Could you try again with the latest master, please? -
04:05 PM Bug report #6045 (Closed): postgis: duplicate key when merging polygons
- When merging features (polygons) in a PostGIS database, when I save changes I get a duplicate key error. I'm copying...
-
- Fixed in changeset commit:"beb70d3175d9995804ffe178e57368224cc9576e".
-
- Jürgen Fischer wrote:
> I suggest to move the plugin functionality to the provider (@selectWidget()@...) - that would... -
- Jürgen Fischer wrote:
> I suggest to move the plugin functionality to the provider (@selectWidget()@...) - that would... -
- Giuseppe Sucameli wrote:
> The "Add Delimited Text Layer" dialog instead displays a wrong result in the "sample text"... -
- Found it!
Using a "plain" separator the provider works as expected, so it skips separators within quoted text.
The "... -
- Jürgen Fischer wrote:
> How are quotes inside quoted text escaped?
I don't know, but if a CSV file follows the "RFC ... -
- How are quotes inside quoted text escaped?
-
- The provider already trims quotes from beginning and ending of the string, but it has to skip the delimiter within th...
-
- Nikos Ves wrote:
> seems to be the same
duplicate of #1380 -
- Nikos Ves wrote:
> seems to be the same
duplicate of #1380 -
10:27 AM Bug report #6044 (Closed): Qgis browser hangs if postgis database doesn't exist
- "Console output:
nikos@nikos-desktop:~/src/qgis-trunk/bin/bin$ ./qbrowser
credentials for dbname='gis' host=localhos...
2012-07-14
-
- Right click on the toolbar in the composer and enable the panel again.
-
- Right click on the toolbar in the composer and enable the panel again.
-
06:08 AM Bug report #6042 (Closed): Qgis 1.8 Print composer right panel missing
- Hello all.
I was using Print composer in Qgis 1.8 and I was able to add some labels, scale bar, map, etc. Then in t... -
03:00 AM Feature request #6040 (Closed): Dissolve should support multiple fields
- Current fTools "Dissolve" function allows to select single field for dissolving OR to dissolve all features. It would...
2012-07-13
-
- Currently when using vector new symbology line pattern fill allows only to change outline style but it's not possible...
-
01:11 PM Bug report #6038 (Closed): Forward Transform Error of GPS data...
- I'm using QGIS for android but I believe this is a QGIS bug (not specific to QGIS for Android):
- Samsung Galaxy 10.... -
- Hi,
Since 1.8.0 version, sometimes a root sub-menu item is not available anymore ....
Fore example, I click File me... -
09:20 AM Bug report #6035 (Closed): Wrong size of labels in Print Composer with CSV file
- In my csv layer, I put labels, size 22. On my screen they look good. But when using Print Composer, labels look bigge...
-
- duplicate of #5832
-
- duplicate of #5832
-
- it seems duplicate of #5832, if yes please close this ticket.
-
- it seems duplicate of #5832, if yes please close this ticket.
-
- I'm using QGIS 1.8.0 on Mac OS X 10.6.8 (last stable version of QGIS I downloaded yesterday).
After working yesterda... -
- Interestingly, in the samples I attached here, the PDF colours weren't as bright as they should have been.
I've just ... -
08:29 AM Feature request #2348: Overview map in composer
- You are correct that the blanking map problem is gone. I have not seen the extent overlay feature, but will give it a...
-
- > Going through this process made me think that the overview map is really all I want. Being able to add it to the co...
-
- Didn't made to 1.8.0 and is still present in current 1.9.0 master :(
I'll take freedom to rise priority to normal, a...
2012-07-12
-
- Great !
But I guess should better set the
feature_limit to a number gret then zero.
Infact very often the user nee... -
- Already implemented in commit:7f3d79ab. The number of features can be specified in the WMS dialog.
-
- Already implemented in commit:7f3d79ab. The number of features can be specified in the WMS dialog.
-
- Hi, I notice the qgis when do an identify on a LayerWMS,
it will return always one only feature also when there is mo... -
- Yes, all works fine. A lot of thanks for your work.
Best regards
Gerhard
-
- Yes, all works fine. A lot of thanks for your work.
Best regards
Gerhard
-
- I've calculated an enviromental index, and because of the input data many pixes of the final product contain many <no...
-
- seems to be the same
2012-07-11
-
- isn't this a duplicate of #1380 ? If yes, please close this ticket as duplicate.
-
- isn't this a duplicate of #1380 ? If yes, please close this ticket as duplicate.
-
- I also attach a dropbob link for the source image I used.
-
- I've calculated an enviromental index, and because of the input data many pixes of the final product contain many <no...
-
> Mousepointer change form to stop-marker, while trying to drop it in db-manager window.
drag and drop muste be don...-
- have installed the latest osgeo4w package. Postgissymbol appears in db manager and statusbar is clean. (see attached ...
-
- > In db Manager, drag and drop a shp-layer from Qgis to spatiallite is further not possible.
> In the status panel, d... -
- Couldn't you just increase the symbol width and height in composer to see more lines? In my opinion, that's the prope...
-
- Closing this ticket because no feedback for 3 months. Please reopen if the issue is still there with 1.8.
-
- That's also my opinion. Btw., the refresh button did not alter the map views also in previous versions
-
-
-
- Fixed in 3869a6c707fefb43c5dc1bc30a87f30e253981d4
-
11:57 AM Bug report #5576: Paths with accented characters give error when opening files
- Still broken, what's the status on this ?
-
08:54 AM Bug report #6018 (Closed): fTools:Select by location is confusing, especially with an empty selec...
- I used "Select by location" in the fTools plugin, with the options to use selected features only. The progress bar st...
-
04:28 AM Bug report #5982: vector layer encoding default not saved not configurable
- In my case, I have seen this with shapefiles in ISO-8859-1 encoding and no cpg file.
When I open the file in qgis ... -
- In a CSV file created from "Save as..." some string values are escaped in quotes (e.g. those which contain the delimi...
2012-07-10
-
01:56 AM Bug report #5982: vector layer encoding default not saved not configurable
- The encoding of vector layer is stored in QGIS project file(*.qgs).
When QgsOpenVectorLayerDialog("Add vector layer"... -
- Fixed in changeset commit:"0da7539e376dac3a4ea50a183ff4edbcb021d442".
-
12:31 AM Bug report #4945 (Reopened): Missing Krovak East North 102067 projection
- Jürgen Fischer wrote:
> Fixed in changeset commit:"7f23d5f481380ea21b57228104dc8ca015e1a93c".
Jürgen, thanks a lot f... -
- Fixed in changeset commit:"7f23d5f481380ea21b57228104dc8ca015e1a93c".
-
11:33 PM Bug report #4945: Missing Krovak East North 102067 projection
- Still missing in 1.8.0 :-(
-
- Alister Hood wrote:
> In both https://aur.archlinux.org/packages/qg/qgis-git/PKGBUILD and https://aur.archlinux.org/p... -
- Alister Hood wrote:
> In both https://aur.archlinux.org/packages/qg/qgis-git/PKGBUILD and https://aur.archlinux.org/p... -
- In both https://aur.archlinux.org/packages/qg/qgis-git/PKGBUILD and https://aur.archlinux.org/packages/qg/qgis/PKGBUI...
-
- Leyan Ouyang wrote:
> I confirm the same problem, also on ArchLinux, now with libqgis_core.so.1.9.0, but all the rest... -
- gespiel - wrote:
> Have just updated from OSGeo4W pyspatial 2.3.1-3. Startupmessages dissapear in 1.8.0.3 and import ... -
- Have just updated from OSGeo4W pyspatial 2.3.1-3. Startupmessages dissapear in 1.8.0.3 and import in qspatial works.
... -
- gespiel - wrote:
> QGIS 1.8.0.3 from OSGeo4W produce the same result.
>
> [...]
not quite. It didn't find pyspatia... -
- QGIS 1.8.0.3 from OSGeo4W produce the same result....
-
- gespiel - wrote:
> Installed QGIS 1.8.0.3 and dev from OSGeo4W. Starting QGIS, popup window reports following message... -
- Installed QGIS 1.8.0.3 and dev from OSGeo4W. Starting QGIS, popup window reports following messages. DBManager window...
-
-
- Is this still true with latest master?
-
- This is fixed in master with the merge of the raster resampling branch
-
- Works now with the raster resampler branch merged
-
- Fixed in changeset commit:"8d8cf50c596b1d900c5e55ee22424578b9a6ac13".
-
- Marco H. already explained me that the details that a user fills in "OWS Server" are for the metadata section in the ...
-
- Confirmed, as it is a regression I'll tag this as blocker. If this change was introduced on purpose then the develope...
-
- Confirmed, as it is a regression I'll tag this as blocker. If this change was introduced on purpose then the develope...
-
- Confirmed, as it is a regression I'll tag this as blocker. If this change was introduced on purpose then the develope...
-
- Confirmed, as it is a regression I'll tag this as blocker. If this change was introduced on purpose then the develope...
-
- Please change the title of this ticket to something more meaningful, otherwise it will never catch the necessary atte...
-
- Please change the title of this ticket to something more meaningful, otherwise it will never catch the necessary atte...
2012-07-09
-
- to understand what I mean you may want to download this project
http://www.comune.torino.it/geoportale/dati/dati_tor... -
- Jürgen Fischer wrote:
> should have been fixed with commit:fdb2475d
is this fix part of qgis 1.8? if yes then it see... -
- should have been fixed with commit:fdb2475d
-
- Did this crop back up again in the 2.0 trunk? I have scaling issues again with output to pdf as non-raster.
-
- Did this crop back up again in the 2.0 trunk? I have scaling issues again with output to pdf as non-raster.
-
- Did this crop back up again in the 2.0 trunk? I have scaling issues again with output to pdf as non-raster.
-
01:56 PM Feature request #5984 (Open): Zoom tool, assign right-click
- When zooming with the magnifying glass (+ and -), the left mouse button is assigned with the obvious function, but wh...
-
- pyspatialite in the standalone installer uses and old internal version of spatialite. Please try the OSGeo4W version...
-
- Import a QGis-Layer in dB manager via drag and drop is broken.
The import via Qspatialite reports the following error... -
- Working with shapefiles with encoding that is not UTF-8 (say ISO-8859-1) is cumbersome because there is no way to aut...
-
12:10 PM Feature request #5981 (Closed): Make "gis" icon set default
- The current default icon set looks unprofessional and some might say ugly. I think we should aim at making QGIS look ...
-
- A common problem is that users are unaware that they are installing an experimental plugin. Once you allow "experimen...
-
- Related to #5251 (or even duplicate)
This is because now QGIS asks for CRS when opened layer without projection info... -
- In QGis ver. 1.7.1, gdal 1,8, it works fine without prj file.
versions 1.7.4, 1,8.0 and master, all gdal 1.9, are inf... -
- Leyan Ouyang wrote:
> I was using Archlinux, gdal 1.9.0, released 2011/12/29
>
> I just updated to gdal 1.9.1 and th... -
- Leyan Ouyang wrote:
> I was using Archlinux, gdal 1.9.0, released 2011/12/29
>
> I just updated to gdal 1.9.1 and th... -
- I was using Archlinux, gdal 1.9.0, released 2011/12/29
I just updated to gdal 1.9.1 and the crash disappeared.
To ... -
- Giovanni Manghi wrote:
> a quite similar issue has been closed as fixed, can you give a try with qgis-master and repo... -
- Giovanni Manghi wrote:
> a quite similar issue has been closed as fixed, can you give a try with qgis-master and repo... -
- Check if you have additional files other than @.shp@, @.shx@, @.dbf@ and @.prj@ that weren't updated. IIRC there mig...
-
- please update qgis to 1.8 and try again.
-
05:55 AM Bug report #5978 (Closed): Missing features in shape-file after editing in qgis
- Hello,
after editing a Polygon-Shapefile - initially created in ArcMap, than imported and edited in qgis - all edite... -
- is this better suited for a wiki page? Where is the issue? if there is one and is about the openalayers plugin then i...
-
06:27 AM Bug report #5979 (Closed): not displaying points over openlayers background map
- Quick mention of a bug and simple work around. Reported bug ages ago and I think it comes and goes with different ver...
-
- Fixed in changeset commit:"74e1b849fec4cb495a1dfb314321bdab8a9b9b83".
-
- Steps to reproduce:
# Check geometry validity of a shapefile
# Analyze the report
# Press close
This message appear...
2012-07-08
-
12:00 AM Bug report #5961: previewMode="Cache" doesn't work in Qgis 1.8
- Yes. In Qgis 1.7.4 it works properly.
P.S. I use OSGeo4W to install Qgis.
Regards -
- It used to work as expected in 1.7.4?
-
- As well as the "zoom last" and "zoom next buttons" it would be good to have a "zoom history" like the "undo history",...
-
- It would also be good to be able to repeat labels in polygons.
See http://esri.force.com/ideaView?id=087E00000004GNn&... -
- Maybe QGIS could beat ArcGIS in this :)
It seems to be a very popular feature request at
http://esri.force.com/ideaLi... -
- Maybe QGIS could beat ArcGIS in this :)
It seems to be a very popular feature request at
http://esri.force.com/ideaLi... -
- It seems there is a Python macro recorder for Blender - maybe this could provide some inspiration/code.
-
- This behavior seems to be inconsistent. On my project, the toggles are now working...
-
- I noticed this, or similar behavior, today. For me, grouped items will turn on when the group tick box is checked. Al...
-
- It would be useful if scale-dependent settings could be applied to a group in the canvas legend. This would provide a...
-
03:58 PM Feature request #5972 (Closed): Measure Line
- Hey Folks,
In the current version (1.8) the *measure line* tool misses a huge feature which is using a user defined ... -
- > Maybe it is an OGR problem?
Yes, maybe. Which GDAL version are you using? -
- I cannot replicate. How do you do the query? can you attach sample data?
-
- Fixed in changeset commit:"81abf7fbc01c8803976455b05bb8485d6c3cc2ff".
-
> but not giving a username/password should also trigger the credentials dialog, when the credentials are needed.
y...-
> but not giving a username/password should also trigger the credentials dialog, when the credentials are needed.
y...-
- So it is not solved... it seg fault on my Linux box. Adding the prj files and it works fine.
-
- So it is not solved... it seg fault on my Linux box. Adding the prj files and it works fine.
-
- So it is not solved... it seg fault on my Linux box. Adding the prj files and it works fine.
-
- So it is not solved... it seg fault on my Linux box. Adding the prj files and it works fine.
-
- So it is not solved... it seg fault on my Linux box. Adding the prj files and it works fine.
-
- This seems a duplicate of #3077 that was already tagged as fixed.
2012-07-07
-
-
- This should be set to closed. Fixed for 1.8.0+.
-
- applied in commit:299857e3
-
- applied in commit:299857e3
-
- I can confirm this issue exists on Mac 10.7.4 with 1.8.0 and master branch. The supplied patch fixes the issue and lo...
-
- Steps to reproduce:
* Start a new project
* Work on it
* Quit, which will prompt a dialog to save the project
* When ...
2012-07-06
-
- jpg with settings and a sample dataset are attached
-
- jpg with settings and a sample dataset are attached
-
- Please provide more info about issue(which options are used) and attach sample dataset to reproduce bug
-
- Running the merge shapefile to one process, qgis 1.8.0.1 crash on windows
-
02:18 PM Bug report #5968 (Closed): Georeferencing plugin imports transparent area when set transparent = ...
- When importing a png via the georeferencing plugin, on some PNGs the transparent area will be imported, not the color...
-
01:22 PM Bug report #5967 (Closed): Wrong Formula in Raster Terrain Analysis' curvature filter
- Hi,
There is an error in the following file:
qgis-1.7.4/src/analysis/raster/qgstotalcurvaturefilter.cpp
(QGis versi... -
- OK thanks,
I'll have a look there.
Régis -
- regis Haubourg wrote:
> Mm.. good question. This is the only database on wich I have admin rights. The goal is to re... -
- Mm.. good question. This is the only database on wich I have admin rights. The goal is to read Oracle database. Is t...
-
- with "odbc access" you're referring to the ODBC tab in "Add vector layer" (ie. OGR provider), aren't you? Why aren't...
-
- On QGIS 1.8 and current master (72d7a23), postgres 9.1 and postgis 1.5.
odbc acces sees table and views but can't fi... -
-
07:24 AM Bug report #5966 (Closed): Adding values in a field of type "real" in a MSSQL table
- Hi,
It seems there be a confusion between scale and size for real fields in Quantum GIS.
For example : When we spec... -
- I see two big advantages.
1- "Add delimited text" plugin lets you choose delimiters and check everything goes well b... -
- Already fixed. Tested with latest master (813a73c302) and all works fine
-
- Already fixed. Tested with latest master (813a73c302) and all works fine
-
- On QGIS 1.8, when classifying data on numerical values, the assistant uses 4 decimals by default, even if data is sto...
-
- Using print template made earlier in Qgis, value previewMode seems to not work properly when is set on Cache.
In pri... -
- Related to #5768.
feature count is currently not working for ruled based styles. When solved, it would be nice to ... -
- Confirmed for me on every version I have tested (from 1.7.4 to current master).
-
- Alexander Bruy wrote:
> BTW, same for PostgreSQL and other DB connections
Only if you opt to save the password - and...
2012-07-05
-
- BTW, same for PostgreSQL and other DB connections
-
12:32 AM Bug report #5959 (Closed): WMS password visible
- When using a WMS with basic authentication, the password is hidden while being entered.
But in at least two places la... -
- Alexander Bruy wrote:
> As I can see, snapping options are saved in project. So we need to add an global option, that... -
- As I can see GPS bindings already available in 1.8.0 and master. Please reopen if necessary
-
- As I can see GPS bindings already available in 1.8.0 and master. Please reopen if necessary
-
- Easy to reproduce:
* Create a new shapefile, with a few features and at least one attribute than contains only NULL v... -
-
03:45 AM Bug report #5954: v.distance does not list existing columns, possibly broken?
- The optional output=name parameter to produce a vector of lines of minimum distance should be added
-
- The description (taken from GRASS) is unclear; please check the GRASS plugin for more clear descriptions
-
- The module tries to write the results to a column, but it does not automatically add it, and the text box does not li...
-
- Please add the missing tools from fTools; I spotted Random and regular point generation, but there are more.
2012-07-04
-
- Fixed in master branch. Please reopen the ticket if there are still issues.
-
- The point displacement renderer is a great new feature. Currently, though, if you add labels to the points, they are ...
-
- Jürgen Fischer wrote:
> Fixed in changeset commit:"72d7a238b76c2d9a137da7a7eebe9d7833509561".
The value of the prima... -
- Fixed in changeset commit:"72d7a238b76c2d9a137da7a7eebe9d7833509561".
-
01:32 PM Bug report #4569: Primary keys of type TEXT always null after creating feature in spatialite layer
- Thsnks, Sandro. The problem is that this enforces artificial restrictions on the database schema. I'm happy so far us...
-
08:10 AM Bug report #4569: Primary keys of type TEXT always null after creating feature in spatialite layer
- The SpatiaLite data provider always assumes a
Primary Key of the INTEGER AUTOINCREMENT type.
please note: the AUTOIN... -
01:14 PM Bug report #5944 (Closed): Fail to build with SIP older than 4.10
- SIP 4.10 introduced the -o option to create specific documentation.
The commit:67c77e5532d7910571b4c84bb4dce3000a0cb... -
- Not only should the browser be able to preview FileGDB, but it should also be able to select and add them to the map ...
-
- As I can see, snapping options are saved in project. So we need to add an global option, that can be overriden by pro...
-
- a big +1
More in general there should be a shortcut to the "snapping options" dialog somewhere in the status bar (fo... -
- Add an 'Enable topological editing by default' checkbox to the default snapping configuration in the Options Dialog -...
-
- It would be nice to be able to place columns in a composer attribute table in custom order. The most intuitive approa...
-
07:38 AM Bug report #5938 (Closed): primary key/autoincrement not imported in sqlite
- When a postgis table with a primary key + autoincrement field is imported in sqlite with the offline plugin, the sche...
-
- What kind of random number would you expect. Just plain ints? The Postgres random function returns a number between...
2012-07-03
-
- the same here on debian!
backtrace:... -
- Confirmed for me on Mac OS X.
-
- Confirmed under Ubuntu.
-
- Confirmed under Ubuntu.
-
- Confirmed under Ubuntu.
-
06:52 AM Bug report #5932 (Closed): Qgis crashes when removing a layergroup
- To reproduce the crash:
1. Add layers.
2. Select all layers.
3. Group the layers with the new Group selected options ... -
07:58 PM Feature request #5807: Develop a test suite
- I have added a basic test suite. Will continue to improve on that, but if there are things in particular you want to ...
-
03:48 PM Bug report #5933 (Closed): Transparent pixel list - Add values from display doesn't work
- - load a raster
- open properties
- transparency tab
- click 'add values from display'
- click a pixel in the image
... -
- Duplicate #5255
-
- Duplicate #5255
-
- OGR Shapefile driver(GDAL>=1.9) recodes attribute strings to UTF-8 and passes it to QGIS, if the shapefile includes n...
-
- I tried to start:
-via desktop shortcut
-via start menu
-via explorer
result is same- error message. -
- Nebojša Tanasković wrote:
> that's what I'm doing all time.
Hm, ok. So how can I reproduce the problem?
Here the m... -
- Subject says it all. Even introducing a tile size value the layers are requested as a single image.
Not sure but may...
2012-07-02
-
- that's what I'm doing all time.
-
- Nebojša Tanasković wrote:
> Installed with OSGEO4W installer- advanced install.
start @qgis-dev.bat@, not @qgis-dev(... -
- Nebojša Tanasković wrote:
> Installed with OSGEO4W installer- advanced install.
start @qgis-dev.bat@, not @qgis-dev(... -
- Installed with OSGEO4W installer- advanced install.
-
- Installed how?
-
- Similar issue reported by an Italian user:...
-
- Error message:
" The procedure entry point ?GEOPROJ4@@3VQString@@B could not be located in the dynamic link library q... -
12:20 AM Feature request #5928 (Closed): Random function
- Hi,
Please add RANDOM function to the expression builder. For example, it would be quite beneficial when calculating... -
01:02 PM Bug report #5927 (Closed): ESRI shapefile encoding problem
- I can't change encoding type when I work with ESRI shapefile ('Add Vector Layer' and 'Option -> General -> Encoding' ...
-
06:04 AM Bug report #5859: ./qgis: error while loading shared libraries: libqgis_core.so.1.9.0
- It's not. The install strips the runtime path (rpath) from the binary, so it expects the library to be in the standar...
-
05:51 AM Bug report #5859: ./qgis: error while loading shared libraries: libqgis_core.so.1.9.0
- Writing a config file with the path to /usr/local/qgis1-9/lib in /etc/ld.so.conf.d also works:
cd
echo "/usr/local/... -
- Although the provided solution works, it is a temporary solution i.m.h.o. Also note that in earlier version (both 1.8...
2012-07-01
-
- Sorry, I noticed that I had a problem, which had been solved already in latest GDAL trunk. There is no problem conver...
-
- I'm recently working with many large projects and I can say that on load the TOC checkboxes are almost always unselec...
-
- Aren Cambre wrote:
> The main problem is in relaxing a filter. As it is now, you can't relax it unless you clear the ... -
06:48 AM Feature request #3337: Query Builder's data sampler doesn't use original dataset
- The main problem is in relaxing a filter. As it is now, you can't relax it unless you clear the filter entirely and r...
-
- As far I can see QGIS does not handle (anymore?) missing postgis layers. When opening a project with a missing postgi...
-
02:50 AM Bug report #5921 (Closed): QGIS 1.8 and Windows 7
- Hello,
Once QGIS Lisboa is installed without any warning message, there s no way to launch the program.
Indeed, noth...
2012-06-30
-
- Subject says it all.
It works fine for the WMS client, but the WFS keeps asking for username and password even if th... -
- upstream bug "OSGeo4W !#297":http://trac.osgeo.org/osgeo4w/ticket/297 filed.
-
- upstream bug "OSGeo4W !#297":http://trac.osgeo.org/osgeo4w/ticket/297 filed.
-
11:48 AM Bug report #5918 (Closed): Included Python has security vulnerabilities
- The version of Python included with version 1.8.0 of QGIS has a security alert associated with it making QGIS insecur...
-
- see also #5917
-
- see also #5917
-
- Hi Andre,
now I see the issue you were talking to me.
This issue is duplicate of #5584 and #5824.
As far I can se... -
- Hi Andre,
now I see the issue you were talking to me.
This issue is duplicate of #5584 and #5824.
As far I can se... -
- When digitizing features to a vector layer with topological errors, QGIS crashes. However, this seems to only happen ...
-
- This is a follow up of #5913, as I was trying to find a workaround for that issue. I was surprised to find that in ru...
-
- In the style tab, "advanced -> rotation field" does not seems to have any effect on polygon fills.
Well, it works on... -
- Mapping between LDID values and codepages (LDID/87 means ISO-8859-1): http://trac.osgeo.org/gdal/browser/branches/1.9...
-
- Shapefile created with QGIS has 0x57 value in the LDID field of dbf file regardless of what encoding has been selecte...
-
- I've created a ticket(Bug #5911).
-
- yes, it is fixed. Thanks!
-
- yes, it is fixed. Thanks!
2012-06-29
-
- implemented in commit:d79c2963
-
- implemented in commit:d79c2963
-
- I still don't see this a bug. It's just one way it can work. If you want to add filtered out data back, you need to...
-
- I still don't see this a bug. It's just one way it can work. If you want to add filtered out data back, you need to...
-
- I still don't see this a bug. It's just one way it can work. If you want to add filtered out data back, you need to...
-
- I still don't see this a bug. It's just one way it can work. If you want to add filtered out data back, you need to...
-
- I still don't see this a bug. It's just one way it can work. If you want to add filtered out data back, you need to...
-
- I was also bitten by this bug. This is quite easy to fix if we just temporarily clear the query when getting the valu...
-
- implemented in commit:d79c2963
-
-
02:32 PM Bug report #5904: 'Add PostGIS layer' ignores multiple geometrytype constraint
- Aha, the problem seems to be caused by Postgis 2.0 view 'geometry_columns'.
The view somehow takes into account the g... -
- I did not check checkbox 'estimated table statistics'
I turned on logging on the postgres database.
If I remove the... -
-
- The constraint aren't inspected at all. The geometry type of the geometries in the table are. If you are using "use...
-
- When opening a PostGIS database with large tables, the QGis UI displays 'detecting...' for a while and scans the tabl...
-
- Fixed in changeset commit:"40dc7df7d77e93cc862da11750aae774c56479bd".
-
- Doesn't happen without @SelectAtId=false@ either.
-
- Open the attached project (alert: the postgis vector in the project is quite big).
Open the table of attributes and ... -
- @SelectAtId@ is default. Using @SelectAtId=false@ on expensive views or on slow connections makes sense sometimes.
-
- This make scrolling/browsing the attribute table much quicker.
Or at least add an option to allow the users to choo... -
- Ivan Mincik wrote:
> I tested 'towgs' parameters problem on current Debian Wheezy (GDAL 1.9) an QGIS 1.8. 'towgs' par... -
- I tested 'towgs' parameters problem on current Debian Wheezy (GDAL 1.9) an QGIS 1.8. 'towgs' parameters where not tak...
-
- Works now in master
-
- This is not caused by the resampler branch. I did a git reset to revision commit:ff87deef0702fdde21764b0f8588b402448e...
-
- There will be a bug that LDID value of new Shapefile is set to 0x57(ANSI) regardless of selected encoding.
At presen... -
- marisn - wrote:
> Alexander Bruy wrote:
> > This is not packaging bug
>
> Shipping QGIS package with known broken GD... -
- Alexander Bruy wrote:
> This is not packaging bug
Shipping QGIS package with known broken GDAL/OGR library that caus... -
- This is not packaging bug
-
- This is not packaging bug
-
Steps to reproduce issue on Windows:
1) Create a new Shapefile with a text attribute;
2) In "Save As" dialog leave ...-
- For the sake of completeness:
In 1.8, libqgis_core and libqgis_analysis do so. -
- For the sake of completeness:
In 1.8, libqgis_core and libqgis_analysis do so. -
- For the sake of completeness:
In 1.8, libqgis_core and libqgis_analysis do so. -
- For the sake of completeness:
In 1.8, libqgis_core and libqgis_analysis do so. -
06:30 AM Feature request #5903 (Closed): For raster data store min-max in the project file
- If we store the min and the max values for raster data in the project file, shouldn't this speed up loading?
-
- Is this still the case with latest master?
If yes, please attach a sample dataset (or send it to me privately if secret) -
- Hm, I'm changing the transparency here and everything does as expected.
What is the WMS URL you are testing against (... -
04:35 AM Bug report #5321: Inserting geometries using a WFS-T of ArcGIS Server
TEST-WFS-T: http://www.umwelt.sachsen.de/umwelt/infosysteme/wfs/services/wfst/bauwerke?version=1.0.0-
- It is a bug in the webapp, not in the installer. Sorry about the noise.
-
- It is shown the nick of the maintainer instead of the original author.
2012-06-28
-
- I agree, it would be very useful. And as far as I remember no other GIS software has this.
-
- When working with large projects, it would be very handy an option to allow order alphabetically the layers in a group.
-
12:33 AM Bug report #5862: Updating composer label text via python - problem with Item Properties panel
- It works with this mornings update.
Thanks for fixing this.
Any chance this can make its way into the next release... -
09:09 AM Feature request #5899 (Closed): Duplicate layer
- Hi !
Often you want to display one Shapefile with several layers (example : for the shapefile LandUse.shp, show colu... -
- Isn't it layer groups what you are looking for?
-
- Hi !
When you work with a lot of layers, you spend a lot of time making your layers visible/invisible to get the des... -
- aperi2007 - wrote:
> OGC in their doc "best practice" will suggest to prefer to the text/html a text/xml that will se... -
- OGC in their doc "best practice":http://www.opengeospatial.org/standards/bp/ will suggest to prefer to the text/html ...
-
- aperi2007 - wrote:
> A server wms always add the text/plain as available format type .
> So is impossible to have a s... -
- >We could offer a combobox in the WMS dialog and let the user select which format to use >on GetFeatureInfo later (FE...
-
- Giovanni Manghi wrote:
> so this ticket should be closed?
This could still be a feature request.
We could offer a c... -
- aperi2007 - wrote:
> I check better ths is ot a bug.
> A server wms always add the text/plain as available format typ... -
- I check better ths is ot a bug.
A server wms always add the text/plain as available format type .
So is impossible to... -
- New description:
see comments 27 and 28
----------------------------
Old description:
when reprojecting (in a dif... -
- Apologies, it was a syntax problem.
This worked:
@
query = "(SELECT * From \\"designations\\".\\"table\\"where ST_DW... -
- James Stott wrote:
> SQL: SELECT * FROM (SELECT * From designations.listed_building where ST_DWithin(ST_GeomFromText(... -
- Adding the ) leads to this error:
Unable to execute the query.
The error message from the database was:
ERROR: subq... -
- James Stott wrote:
> The following doesn't work:
>
> @uri.setDataSource('',"(SELECT * From \\"designations\\".\\"tab... -
- Marco Hugentobler wrote:
> I think this is the same issue as 5867. Go to settings->options->rendering->raster and set... -
- Marco Hugentobler wrote:
> I think this is the same issue as 5867. Go to settings->options->rendering->raster and set... -
- aperi2007 - wrote:
> I guess it should better if the choose was based on list of formats available from getcapabiliti... -
- I guess it should better if the choose was based on list of formats available from getcapabilities for that layer.
-
- (see also ticket #5887)
Actually qgis always call an identify on WMS using
INFO_FORMAT=text/plain
An useful enhanced... -
- Sometimes when adding layers with different CRSs and enabling OTFR, QGIS throws the following error
@
inverse transf... -
- QSettings are always read from the default ~/.config/QuantumGIS/QGIS.conf, regardless of the --optionspath value, whe...
-
- Add a WMS layer and try to change the transparency, it can happen that the layer disappear or that the colours go cra...
2012-06-27
-
- I have changed my code slightly from the original code I posted on the mailing list and I get a slightly different er...
-
- > SQL window, retriving the data worked, loading as layer didn't (but didn't visually report any error)
Can you repr... -
- It's a bug on the PG provider. The schema part is added also for queries (a check is missing).
-
09:09 AM Bug report #5883 (Closed): Erroneous query: zero-length delimited identifier at or near """"
- SQL window, retriving the data worked, loading as layer didn't (but didn't _visually_ report any error)
Error/debug ... -
- Fixed in f383deae8cab8f85bb7f9e8de9d71fbe37fa4160
-
- If global option "Contrast enhancement" (in "Settings - Options - Rendering") has value different from "No Stretch" a...
-
- Hi,
qgis when ask to a WMS server for a GetFeatureInfo, always ask using
INFO_FORMAT=text/plain.
This is a bug. It s... -
- When developing qgis, much time can be saved by running from the build directory, bu the core plugins are missing bec...
2012-06-26
-
- Try to set path to GDAL binaries and other files in GDALTools plugin options
-
01:27 AM Bug report #5875 (Closed): QGIS doesn't use its own GDAL tools and fails if another version of GD...
- This issue applies to both Windows 32 and 64 bit and I have tried it on Windows 7, Vista and XP. I have also had the...
-
01:31 AM Bug report #4534: "Split vector layer" freezes QGIS
- Hello. This issue happens also on 32bit, at least on my system: Kubuntu Oneiric 11.10, kernel 3.0.0-20-generic-pae, 4...
-
- thanks for looking at this. I will test once osgeo4w updates to a new version and let you know.
-
12:22 AM Feature request #5874 (Closed): Use per layer option for label all features option
- When defining the label engine settings, the "Show all
labels" option should be a layer property rather than an engin... -
-
- I think this is the same issue as 5867. Go to settings->options->rendering->raster and set RedBand to 1, GreenBand to...
-
- Radim Blazek wrote:
> It is early devel version, rasters are under heavy development, _obviously_ it has to be fixed.... -
05:46 AM Bug report #5871: WCS layers do not show anymore
- It is early devel version, rasters are under heavy development, _obviously_ it has to be fixed. It is maybe better ju...
-
- Radim Blazek wrote:
> It works, you just have to select the bands manually in properties - style.
oh, I see.
But it... -
- It works, you just have to select the bands manually in properties - style.
-
- Somewhere in between
QGIS version
1.9.0-Master
QGIS code revision
480c860
and
QGIS version
1.9.0-Master
QGIS code... -
12:52 PM Bug report #4819: "Identify Features" tool is slow with complex/big features (lot of nodes)
- Giovanni Manghi wrote:
> Thomas Arnold wrote:
> > Hi,
> >
> > did you use the patch? With the patch the selecting of... -
- No. How do I apply the patch to test it? using osgeo4w.
-
- Thomas Arnold wrote:
> Hi,
>
> did you use the patch? With the patch the selecting of the a feature with the identif... -
- Hi,
did you use the patch? With the patch the selecting of the a feature with the identify feature tool in the sssi_... -
- I have also noticed, that if I can get a polygon to identify without hanging, then if I keep it highlighted from the ...
-
11:24 AM Bug report #5873 (Closed): Vector Grid UI is inscrutable
- I'm not sure where to begin here - there are probably multiple tickets in this filing, but I thought I'd file a massi...
-
- Fixed in changeset commit:"91862c3432be552349789316067f89204f4e1eed".
-
-
- Good temporary solution, thanks
-
- When using the symbology widgets for editing/creating markers and selecting large sizes (usually larger than 5), the ...
-
- For the record: it was sorted out in IRC that the RubberBand thing has nothing to do with this ticket and that it wil...
-
02:10 AM Bug report #3162: GRASS raster display inaccurate
- I can confirm this issue still present in QGIS 1.8.0 RC1 on Linux, and in various 1.7 and 1.8 versions on Windows and...
2012-06-25
-
- I am getting this problem too. The Identify Results window just goes blank and says 'Not Responding'. I have not foun...
-
- Currently in the composer there is the ability to annotate or "mark up" on top of a map using labels, images, arrows/...
-
- Update should work with commit:4e36df067. Please test and report back
Also available in: Atom