Activity
From 2009-07-21 to 2009-08-19
2009-08-19
-
09:33 PM Bug report #1859: Graphic interface crash
- Please check again with a recent QGIS. I suspect this can be a local problem: did you compile it yourself? Which gdal...
-
- See suggestion (and possible patch) in #1822
-
02:37 PM Feature request #554 (Closed): identify - some varchar column displayed instead of the key column
- Replying to [comment:7 msieczka]:
> Replying to [comment:6 timlinux]:
> > For me the issue is resolved now following ... -
- Replying to [comment:7 msieczka]:
> Replying to [comment:6 timlinux]:
> > For me the issue is resolved now following ... -
02:32 PM Bug report #1534: Cannot Select Custom Projection (CRS)
- I'll be trying 1.0.3 as soon as it hits the openSuSE repositories!
-
02:23 PM Bug report #1534 (Closed): Cannot Select Custom Projection (CRS)
- Added the srs.db (and the script for future use, thanks!) and the above seems to work as custom CRS now. Fixed in com...
-
- Added the srs.db (and the script for future use, thanks!) and the above seems to work as custom CRS now. Fixed in com...
-
- Thanks, have you tried when the map layer is in degrees? Very interesting results... :-)
-
- I do: commit:0c59c744 (SVN r11153)
-
- This is possible now (commit:fdc629ce (SVN r11444)), don't know when it happened. :-)
-
- This is possible now (commit:fdc629ce (SVN r11444)), don't know when it happened. :-)
-
- Points have no nodes, it's just a fetaure. You can't edit points with the same tool as you edit lines and polygons.
-
10:02 AM Bug report #1875: A few problems with crs definitions with TOWGS parameters
- Replying to [comment:43 homann]:
> Again, the WKT you have supplied is not translated by OGR into
> the proj-string y... -
08:57 AM Bug report #1875: A few problems with crs definitions with TOWGS parameters
- Reviewing the ogr_srs_proj4.cpp code the +datum=nzgd49 is only generated when exporting to PROJ.4 if a 6272 datum aut...
-
- Again, the WKT you have supplied is not translated by OGR into the proj-string you think it should be. OGR library is...
-
- Replying to [comment:41 homann]:
> So, it appears that the WKT your v.out.ogr module wrote
> isn't translatable by OG... -
- So, it appears that the WKT your v.out.ogr module wrote isn't translatable by OGR itself, or rather it does not repre...
-
- Replying to [comment:38 homann]:
> It appears to be something strange about the supplied WKT? If
> you add a +datum i... -
- see also bug #1487 (and previously mentioned #1079)
-
- I confirm: if I remove a layer from a project, I can close QGIS without a question
-
- fixed in commit:80a9cef4 (SVN r11443)
-
- fixed in commit:80a9cef4 (SVN r11443)
-
- fixed in commit:cf8d97c3 (SVN r11442)
-
- fixed in commit:cf8d97c3 (SVN r11442)
-
- Still valid after commit:52c420b0 (SVN r11439)?
-
- If we run r.mapcalc in graphic mode, then we copy the resulting command in the GRASS shell, it throws an error, eg:
... -
- fixed in commit:52c420b0 (SVN r11439)
Although that doesn't fix problems in your data model/plugin. You have severa... -
- fixed in commit:52c420b0 (SVN r11439)
Although that doesn't fix problems in your data model/plugin. You have severa... -
06:17 AM Bug report #1884 (Closed): addFeatures don't work for SpatiaLite layer
- Seems that addFeatures method of [[SpatiaLite]] data provider don't work. I try to copy all features from shapefile t...
-
- fixed in commit:52c420b0 (SVN r11439)
-
- fixed in commit:52c420b0 (SVN r11439)
-
- Confirmed on Debian unstable: attributes are shown with a different client (I tested SQLite manager), but not in the ...
-
- In attribute table of [[SpatiaLite]] layer all attributes shown as NULL values.
For testing:
* create a [[SpatiaLite]... -
- A side effect of this patch seems to be that GRASS vectors are not visible on the canvas, unless the editing is activ...
-
- Fixed i18n problems in , it was no possible auto create CRS when i18n characters were used in the description.
-
- see also comments in bugs #1079 and #1875
-
- ... we can't assume that it is equal to EPSG 3059, where the datum is specified as LKS92 (WKT) or towgs84=0,0,0,0,0,0...
-
- The WKT is read by the OGR library to an OGR-internal format, and then exported to proj4 string from that OGR format ...
-
- The WKT is read by the OGR library to an OGR-internal format, and then exported to proj4 string from that OGR format ...
-
02:20 AM Bug report #1487 (Feedback): QGIS fails to recognise Shapefile projection
- Still fails with QGIS 1.2.0 (commit:da17b5de (SVN r11430)). Related question - why QGIS SRS definition differs from o...
-
- Still fails with QGIS 1.2.0 (commit:da17b5de (SVN r11430)). Related question - why QGIS SRS definition differs from o...
-
05:35 AM Feature request #1882 (Closed): different snapping behavior for each editable layer
- I like to have an option to have different snapping options for different editable layers. It would be very useful to...
-
- see also comments in bugs #418, #1487, and #1875
-
- Still not implemented in 1.2.0. Bumping up milestone to 1.3.0.
2009-08-18
-
- You are right. Opened new bug #1881 "QGIS should ignore bogous CRS from WMS services"
-
01:45 PM Bug report #1504 (Closed): WMS fails to offer CRS change for large CRS lists
- This problem is not related to qgis. Doing some research about the problem I found that Geoserver offers an srs like ...
-
- This problem is not related to qgis. Doing some research about the problem I found that Geoserver offers an srs like ...
-
- As described in ticket #1504 QGIS fails to provide WMS CRS selection if one of WMS provided CRS definitions is wrong....
-
02:12 PM Bug report #1874: qgis doesn't run in Fedora 10 or Fedora 11
- I've filed a report with Fedora, thanks
-
- proposed by _sdf_ on "#qgis":http://logs.qgis.org/slogs/%23qgis.2009-08-18.log
-
- It appears to be something strange about the supplied WKT? If you add a +datum in the Custom CRS and export the file ...
-
- > I still can't find Frank's post about storing +proj terms in
> a WKT extra field. Frustrating.
Ok, I found him on ... -
- perhaps of interest-
- comparing CRSs
http://postgis.refractions.net/pipermail/postgis-users/2004-November/006245.ht... -
- slight update:
- on the fly reprojection seems to be the culprit of the huge wait to render after all
- now I see t... -
- Hi,
With the latest svn trunk I still see the failure to apply a datum shift as seen in this old screenshot:
http://... -
04:34 AM Bug report #1875: A few problems with crs definitions with TOWGS parameters
- Replying to [comment:32 homann]:
> Great, it seems to be fixed then finally. Most of the projections supplied with QG... -
- Great, it seems to be fixed then finally. Most of the projections supplied with QGIS are unfortunately without a +dat...
2009-08-17
-
- applied in commit:7c2b3a28 (SVN r11423)
-
- applied in commit:7c2b3a28 (SVN r11423)
-
- Hi,
A fresh checkout of svn trunk fails to build on Debian due to a missing build-depends on the pyqt4-dev-tools pac... -
- Ok, I have tested with QGIS trunk from 15 aug 2009. Attached a screenshot, the result of a vector projection from Lat...
-
- Fixed in commit:e4f05aa8 (SVN r11410).
-
- Fixed in commit:e4f05aa8 (SVN r11410).
-
- Fixed in commit:e028bc75 (SVN r11407).
-
- Fixed in commit:e028bc75 (SVN r11407).
-
- Fixed in commit:e5d72719 (SVN r11406).
-
- Fixed in commit:e5d72719 (SVN r11406).
2009-08-16
-
- Tested with .
1) Encoding seems to be written to .qgs file now. Changing encoding with editor in the .qgs file (e.g.... -
- Tested with .
1) Encoding seems to be written to .qgs file now. Changing encoding with editor in the .qgs file (e.g.... -
04:17 PM Bug report #1875: A few problems with crs definitions with TOWGS parameters
- Please wait for the tests made by neteler, I'm pretty sure I'm making not necessary confusion.
-
- Replying to [comment:28 homann]:
> Remove the +damtum=WGS84 from proj B, and test.
Hi Homann,
If I remove "+dat... -
- Please, can you explain to me what a prj string with both +datum=WGS84 and +towgs84 means? I thought both are datum d...
-
- Replying to [comment:25 lutra]:
...
> When loading the layer defined with B) qgis strips or ignores
>
> "+towgs84=-... -
- Hi,
as you suggested I created two custom crs
A) +proj=tmerc +lat_0=0 +lon_0=9 +k=0.9996 +x_0=1500000 +y_0=0 +ellps... -
- Can you be more specific? What is the custom CRS you're trying to assign?
-
- Hi homann, thanks again.
Just a small problem yet. I have defined a custom crs with +datum and +towgs parameters and... -
- Since version 4.6.0 of the PROJ.4 library we use for transformation, the +towgs84 is not handled unless both CRS:es h...
-
- Since version 4.6.0 of the PROJ.4 library we use for transformation, the +towgs84 is not handled unless both CRS:es h...
-
- Not many of the CRS in srs.db have datum specified.
-
- Replying to [comment:18 homann]:
> Well, I can't see what we can do about it. We could gues the datum always is wgs84... -
- Seems to me a particular case. I vote for documenting the new Proj behaviour, using for instance this specific exampl...
-
- Well, I can't see what we can do about it. We could gues the datum always is wgs84 when not specified, but I'm not su...
-
- Replying to [comment:16 homann]:
> As there is no datum specified in the +proj string, +towgs84 has no effect. With ... -
- It appears to be an intended change in PROJ.4, see this comment from
pj_transform.c:'
---
/* -----------------------... -
- applied in commit:95ca9557 (SVN r11402)
-
- applied in commit:95ca9557 (SVN r11402)
-
- Closing this, as it seems we have finally solved the issue. See #1875.
-
- Closing this, as it seems we have finally solved the issue. See #1875.
-
- My latest comment was obviously regarding trying to open the grass gui by issuing a command with no parameters. When ...
2009-08-15
-
-
- Replying to "mwtoews":/issues/show/1876:
> Strictly speaking, this is not a bug, but is in a grey-area leaning toward... -
12:26 PM Bug report #739 (Closed): GRASS Shell non-functional in OS X
- Applied in commit:f269da46 (SVN r11390).
There was also an anomaly with the + and - keys (used in zoom in/out and ad... -
- Applied in commit:f269da46 (SVN r11390).
There was also an anomaly with the + and - keys (used in zoom in/out and ad... -
- Hi, while I am unable to follow the technical details of this report I have attached a patch to fix compile problem o...
-
- Just a note from the OSX side. Python modules on OSX shouldn't link the Python library directly, since they are load...
-
- I'm revisiting this, because Markus seems to have hit this Mandriva specific problem again.
Replying to [comment:23 ... -
- remove setjmp/longjmp in grass plugin&provider and use exceptions instead
-
- the attached patch removes a lot of files in python plugins that were generate from ui and resources files and adds c...
2009-08-14
-
- If it's lat/lon, it should be lat/lon or perhaps east/north. Or is it north/east? :-)
As living with a projection (R... -
- Replying to [comment:6 homann]:
> I don't see the issue. Is there a defined order between Easthing and Northing that ... -
- Hi!
I attached here the example. But look, as I said (maybe not in a very clear way) after all could have no problem... -
- As I don't have GRASS, I'd appreciate if you create two small test layers in shape file format with the two almost id...
-
- As I don't have GRASS, I'd appreciate if you create two small test layers in shape file format with the two almost id...
-
- Seems to me that if they align or not depends on the ellipsoid defined in the project crs. So after all it may be a p...
-
- ... and then I enable OTFR and they actually *align*, it is right.
-
- I'm sorry,
but all the confusion of the last days made me look at the problem described in C) in the wrong prospect... -
- Hi homann,
thanks! it works everything minus C)
The great news, seems to me, that a number of problems (all but one... -
- jef cleaned it up in commit:7085cf57 (SVN r11384)
-
- no, spoke to soon. Same error.
-
- forget it, I cleaned up and now is compiling. I'll leave feedback soon! thanks!
-
- Hi homann,
trying to test your fixes but right now I'm not able to compile... -
- OK, I committed two changes, commit:97ac21e6 (SVN r11381) and that fixes this for me. Re-open if necessary. :-)
-
- OK, I committed two changes, commit:97ac21e6 (SVN r11381) and that fixes this for me. Re-open if necessary. :-)
-
- It appears that GDAL treats a projection with and without towgs as the same.
-
- Have added a patch for b).
-
- b) I discovered just now, GDAL strips the towgs parameter when writing, see also http://home.gdal.org/projects/opengi...
-
- Hi,
I'm making some extensive test to try break down the problems described in the ticket #1079 and I may have found... -
05:36 PM Bug report #1876 (Closed): PostgreSQL text fields become zero-length strings when blanked on attr...
- This bug is simple to create in QGIS 1.0.x and 1.2.x.
Edit any [[PostGIS]] layer with several text fields:
1. Add a... -
- OK, I found where the shortcuts are initially set in qgisapp.cpp.
I checked all the single-letter shortcuts and all ... -
06:55 AM Bug report #1858: Bad behavior of simbology items on the new legend GUI
- Paolo, I'm using Qt 4.5.0.
2009-08-13
-
- Automatic addition of a custom CRS for unknown to QGIS - but valid - CRS:es from e.g WKT in commit:93d5bd2d (SVN r113...
-
- Automatic addition of a custom CRS for unknown to QGIS - but valid - CRS:es from e.g WKT in commit:93d5bd2d (SVN r113...
-
- Did you use the packages listed on QGIS' download page or from some other source?
AFAIK there is currently no QGIS' ... -
- I forgot
GNOME 2.26.3 -
- I recently installed qgis on a computer running fedora 10 using yum. There were no error messages during the install...
-
- Are you saying change shortcuts to use meta keys for all systems (it would be good to be consistent across platforms)...
-
- I prefer that we keep only one issue per bug ticket, instead of adding everythinhg that seems wrong with projection t...
-
- Replying to [comment:27 homann]:
> Pcav promised to attach a test case that I could use.
I may be wrong, but the t... -
- Pcav promised to attach a test case that I could use. Then I'll have a look.
#418 is probably a fetaure extensions an... -
- I don't see the issue. Is there a defined order between Easthing and Northing that QGIS does not obey?
-
- I believe the errors have been fixed (see #1219).
-
- Fixed in commit:6bff6a69 (SVN r11364).
-
- Fixed in commit:6bff6a69 (SVN r11364).
-
- Made a further test with the osgeo4w installer (using qgis 1.2) on windows xp.
A first try to use a grass command in... -
-
- Okay, I think we can call this a GRASS issue then. I don't do GRASS, so I can't test.
2009-08-12
-
- Replying to [comment:22 homann]:
> What is the status of this bug? Do we need to fix the CRS recognition logic yet?
... -
- Now the embedded GRASS shell can call the tcl/tk interface, so this is fixed. In the long term a better solution shou...
-
- Now the embedded GRASS shell can call the tcl/tk interface, so this is fixed. In the long term a better solution shou...
-
- Note:
it happens only if the .qml has the same name of the .shp file, so the .qml is loaded together with the shape/... -
- Interesting. Can be it an OGR problem?
-
11:49 PM Feature request #1855: Postgis View Layers with OID as primary key are loading very slow
- Replying to [comment:5 jef]:
Thank you for the patch. Yes in this way it works fine for me!
-
- Tested rather extensively, and I cannot reproduce it. Which Qt are you using?
-
- Hi,
it works but not for GRASS rasters. For them, if the colormap is changed trough the grass toolbox, reloading the... -
- Hi,
it works but not for GRASS rasters. For them, if the colormap is changed trough the grass toolbox, reloading the... -
- Fixed in commit:26c8566b (SVN r11362).
-
- Fixed in commit:26c8566b (SVN r11362).
-
- Reload is especially useful for delimited text plugin, and GPX layers.
-
-
- Fixed in commit:9d7d1a7a (SVN r11361).
-
- Fixed in commit:9d7d1a7a (SVN r11361).
-
- Replying to [comment:21 homann]:
> Okay, try commit:6bea923d (SVN r11540). Worksforme now. Closing this bug, now it's... -
- Okay, try commit:6bea923d (SVN r11540). Worksforme now. Closing this bug, now it's just a matter of documenting what'...
-
- Okay, try commit:6bea923d (SVN r11540). Worksforme now. Closing this bug, now it's just a matter of documenting what'...
-
- Two useful scripts (v.db.dropcol e db.dropcol) are only available in grass64, so the corresponding modules should be ...
-
- If you launch man for a command name from the embedded GRASS shell, some characters are not visible
-
- Hi,
I cannot replicate it on both Ubuntu 9.04 and Windows.
Does this happens always, regardless of the data you hav... -
03:35 AM Bug report #1871: groups in the table of content
- Replying to [comment:1 lutra]:
> what version of qgis are you using?
1.2.0, i've compiled yesterday. -
- what version of qgis are you using?
-
- You have to select one layer to add a new group,
if you click dx and choose add group in any place of the table of co...
2009-08-11
-
- Replying to [comment:19 homann]:
> How did you see that scale bar was right, and measurements were wrong?
Well,
the... -
- How did you see that scale bar was right, and measurements were wrong?
-
- Replying to [comment:12 homann]:
> OK, I haven't tested with projection in feet, so no surprise there. Can you descri... -
- Hi,
sorry for the late answer. Do you mean that measuring tools works fine for you when using projections in feet? I... -
- Please provide detailed steps to reproduce the problem. I have tried without understanding what you do.
-
- What projections did you switch between to see the difference in meters and feet?
-
- Once this is fixed I guess we will have to discuss what to do with scale bars and measures tool when OTFR is disabled.
-
- Hi
Replying to [comment:12 homann]:
> OK, I haven't tested with projection in feet, so no surprise there. Can you... -
- OK, I haven't tested with projection in feet, so no surprise there. Can you describe what projection and what method ...
-
- Confirmed on Ubuntu 9.04, grass6.4rc4, qgis latest revision
-
- 1. open a GRASS mapset
2. load a vector
3. start editing
4. click on the table icon
5. click on a feature: the ta... -
- Replying to [comment:7 cfarmer]:
> The test dataset provided with this ticket now works properly (as far as I can te... -
05:51 PM Bug report #1758: Tools (Ftools): clip and difference tools give the same results
- Replying to [comment:4 lutra]:
> See attached image. Is this one of this cases?
This should now be behaving properly... -
- I don't know if it is important, but have you noticed that with Intersect this doesn't happens?
-
- Replying to [comment:4 lutra]:
> See attached image. Is this one of this cases?
Yes. This appears to be an issue w... -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Replying to [comment:3 rugginoso]:
> For the multiple input issue, open an other ticket.
done
http://trac.osgeo.o... -
06:57 AM Bug report #1642 (Closed): v.to.db GRASS tool interface problem
- Fixed the attribute table update issue in commit:4fe683b3 (SVN r11344).
For the multiple input issue, open an other ... -
- Fixed the attribute table update issue in commit:4fe683b3 (SVN r11344).
For the multiple input issue, open an other ... -
- It does show the column list, but it does not update it if the module is already opened when a layer is loaded. To ch...
-
- Sorry, I didn't build with python and didn't update the bindings, I will fix this and upload a new patch.
Regards
Go... -
- Replying to [comment:2 lutra]:
> I gave it a look and it seems to have yet a problem when using Union with two layers... -
- Replying to [comment:2 lutra]:
> I gave it a look and it seems to have yet a problem when using Union with two layers... -
- the attached patch allows value maps to be loaded from csv files
-
-
- We are enjoying the ftools plugin for QGIS but desire an enhancement regarding the JOIN functionality: we are using Q...
-
- I would suggest to change the shortcuts and close this bug. Please OSXers check this out
-
- among the others:
v.to.db
v.db.addcol
r.patch
r.mapcalculator
in some cases the lack of multiple selection turn... -
- It would be better to add the "browse" button also under linux. As said under windows there is already and it works, ...
-
- It would be better to add the "browse" button also under linux. As said under windows there is already and it works, ...
-
- Hi.
I rescaled the image, opened your project and vector/raster layers then saved again with qgis 1.2. Then started ... -
03:17 AM Bug report #1859: Graphic interface crash
- Replying to [comment:4 lutra]:
> I cannot replicate this on both linux and windows with the latest revision. I'll cha... -
- Under Ubuntu 9.04 I get...
2009-08-10
-
- I updated to rev 11342 and it fixed the measure area tool in square feet when the projection is in meters.
Still iss... -
- Replying to [comment:9 homann]:
> I changed the way it works a bit. The layer units are grayed out when OTFP is on, a... -
- I changed the way it works a bit. The layer units are grayed out when OTFP is on, and there is a separate selector fo...
-
- Replying to [comment:2 cfarmer]:
> Note: In some cases geometries may still be mis-formed. This is a separate issue,... -
- Should now be fixed in commit:b466b2b6 (SVN r11340). Please test and reopen ticket if not fixed properly.
Note: In so... -
- Should now be fixed in commit:b466b2b6 (SVN r11340). Please test and reopen ticket if not fixed properly.
Note: In so... -
- Replying to [comment:1 cfarmer]:
> This has been fixed in commit:724bd28a (SVN r11342). Note: Results should coincide... -
- Replying to [comment:1 cfarmer]:
> This has been fixed in commit:724bd28a (SVN r11342). Note: Results should coincide... -
- This has been fixed in commit:724bd28a (SVN r11342). Note: Results should coincide with those from [[ArcGIS]] and gvS...
-
- This has been fixed in commit:724bd28a (SVN r11342). Note: Results should coincide with those from [[ArcGIS]] and gvS...
-
- I'm not sure to classify this as "critical" but as the resulting attribute tables are wrong seems to me "data corrupt...
-
- Well, the problem was then explained very bad. I will open a new ticket with a better description if and when I will ...
-
- Well, the problem was then explained very bad. I will open a new ticket with a better description if and when I will ...
-
- What does mean "rtf"? rich text format?
What options are you missing in the label editor of the print composer?
You... -
- Closing for lack of further feedback/explanations. Please reopen if/when necessary.
-
- Closing for lack of further feedback/explanations. Please reopen if/when necessary.
-
- Closing for lack of further feedback/explanations. Please reopen if/when necessary.
-
- Closing for lack of further feedback/explanations. Please reopen if/when necessary.
-
- Closing for lack of further feedback/explanations. Please reopen if/when necessary.
-
- Closing for lack of further feedback/explanations. Please reopen if/when necessary.
-
- Changed the behavior of the attribute editor as suggested by msieczka.
Fixed in commit:60a8f73b (SVN r11332). -
- Changed the behavior of the attribute editor as suggested by msieczka.
Fixed in commit:60a8f73b (SVN r11332). -
- This seems to have been fixed on the latest version of qgis 1.2 installed with the osgeo4w installer.
-
- This seems to have been fixed on the latest version of qgis 1.2 installed with the osgeo4w installer.
-
- _"Merge: This geoprocess can work with many input layers. It merges all of
these creating a new result layer which ha... -
- For what I see now on the user manual (tip 21 on page 58 of the qgis 1.1 manual) it seems that when pasting a feature...
-
- Now the grass plug-in checks the required attribute into interface description.
Fixed in commit:1e1c65d2 (SVN r11329). -
- Now the grass plug-in checks the required attribute into interface description.
Fixed in commit:1e1c65d2 (SVN r11329). -
- I'll close this ticket because:
a) ok, we know now that copy/paste of features among layers does not work as the req... -
- I'll close this ticket because:
a) ok, we know now that copy/paste of features among layers does not work as the req...
2009-08-09
-
- Hi
> I'll try 1.2 out and see what it does. 1.2 didn't work the last time I tried it (1.2.0-4 I think in the OSGe... -
10:03 PM Bug report #1806: QGIS crashes/has graphical "glitch" on Windows Vista 64bit
- Eh, I can't say I wholly agree with closing it and marking as invalid, but I understand the reasoning. If Trac has i...
-
- Just got 1.2 to work (a previous installer wasn't able to load a DLL for some reason -- works now with 1.2.0-12), and...
-
02:50 AM Feature request #1825 (Feedback): Re-center to current cursor postion at zooming
- No matter which keyboard shortcut would be linked to
zooming, re-centering to current cursor position is
often requir... -
- No matter which keyboard shortcut would be linked to
zooming, re-centering to current cursor position is
often requir... -
- I think that this behavior is not useful, having a keyboard
shortcut that implies using the mouse afterwards does not... -
- Yes, but as someone else mentioned in the list, some shortcuts must
be enabled by default. I suggest having 2 sets of...
2009-08-08
-
07:39 PM Bug report #1864 (Closed): Saving projects with relative paths
- qgis works great on opening projects with relative paths to datasources, thanks to https://trac.osgeo.org/qgis/ticket...
-
- > I think QGIS should be free of this troubles :)
I agree! :)
-
- Yes Lutra, I understand you, but the users could do anything, probably by mistake. I thought to write this issue on q...
-
- I really have no lucky reproducing this, even with your latest directions.
Admitted that it is reproducible bug som... -
- Replying to [comment:10 homann]:
> I don't know how many bugs I have seen submitted on this issue.
about pro... -
- The second have been added ("show selected records only" checkbox).
-
- I like the idea too, maybe like the actual way to show the attribute table, with an option to make it docked.
2009-08-07
-
- Replying to [comment:3 homann]:
> Perhaps another interior selectioncolor would be appropriate.
The problem is that... -
- It's made this way by deisgn, see #239. Perhaps another interior selectioncolor would be appropriate.
-
11:41 PM Bug report #1443: Changed layer saving enhancement
- I thought of that too. However, the user still has the possibility to cancel if asked to save the changes. If he canc...
-
- great news, thanks.
I noticed that if it is the case, qgis notices about saving the project before asking to save th... -
- Fixed in
-
- Fixed in
-
- I don't know how many bugs I have seen submitted on this issue.
If OTF is off, the selector sets the unit of the sou... -
- I don't know how many bugs I have seen submitted on this issue.
If OTF is off, the selector sets the unit of the sou... -
- The unit selector is needed for those who run with OTF projection off.
Remembering last choice seems to be the best ... -
- Hi, I can't find yet a valid pattern but I see I can get the bad behavior doing this:
+ Load multiple layers.
+... -
- I cannot replicate this on both linux and windows with the latest revision. I'll change the priority by now, awaiting...
-
- attached patch adds snapping to the current layer (which can be changed in the process) to the measurement tool.
2009-08-06
-
- As noted in #1862 it is not necessary to rename the layers. The behavior show also after simply loading a project file.
-
- Hi,
this is duplicate of #1760, that I confirmed under Linux, so now we know it is a issue on probably all platforms. -
- Hi,
this is duplicate of #1760, that I confirmed under Linux, so now we know it is a issue on probably all platforms. -
06:33 PM Bug report #1862 (Closed): layer editing icon doesn't show on layers loaded from a project
- For items on Layers panel: with the recent return of indicating that a layer is being edited, which works on layers a...
-
- It appears that QLabel is doing a lot of work to paint the new values. Perhaps using a QLineEdit control would be bet...
-
03:17 PM Bug report #1861: Help Documentation is Wrong Version
- OK, I understand, but would like to make a suggestion --
I have another GIS software package (not free!) and they ma... -
- In QGis >= 1.1 the help file does not links anymore directly to the pdf, but links to the manual page on the qgis sit...
-
- In QGis >= 1.1 the help file does not links anymore directly to the pdf, but links to the manual page on the qgis sit...
-
- After installing QGIS v1.0.2.0 on two different Windows computers, the help PDF file included with the download links...
-
- This is true also under linux (ubuntu) with the latest svn version of qgis. Tested with a Idrisi .rst DEM. True also ...
-
- When you add a Digital Elevation Model (DEM) layer, the icon in the Map Legend is displayed as a gray icon.
After upd... -
- Even under windows I had no lucky reproducing the problem. Any news on your side?
-
- Replying to [comment:9 jctull]:
> The same problem exists in the map composer. I've attached the two cpp files with t... -
- Replying to [comment:9 jctull]:
> The same problem exists in the map composer. I've attached the two cpp files with t... -
09:04 AM Bug report #1752: Font label settings not working on OS X
- Attached map composer fixes submitted as .
-
- When doing so, I think it would be best to alphabetize by file extension rather than name of file, but still provide ...
-
- CRS, I guess...
-
- What is 'KBS'???
-
> OK i wait and try Qgis 1.2
> Precision : i use ubuntu 8.04 and Qgis is installed via "ubuntugis"
>
Hi,
if you ...-
- Replying to [comment:1 lutra]:
> Qgis 1.2 will ship soon (by the end of the month), can you please give it try and se... -
- Qgis 1.2 will ship soon (by the end of the month), can you please give it try and see if the situation changes? Under...
-
- Hello
I'm in trouble with Qgis graphic interface who start to crash after one hour utilization (about).
First the ra... -
- Hi,
bookmarks are saved in projects, at least in the latest version as far I can see. Please reopen if I misundersto... -
- Hi,
bookmarks are saved in projects, at least in the latest version as far I can see. Please reopen if I misundersto... -
- This seems to me a reality now with the edit widgets under layer "properties -> attributes". Please reopen if I'm wrong.
-
- This seems to me a reality now with the edit widgets under layer "properties -> attributes". Please reopen if I'm wrong.
-
- Closing for lack of feedback and details. but please feel free to reopen it if necessary (but leave more details on h...
-
- Closing for lack of feedback and details. but please feel free to reopen it if necessary (but leave more details on h...
-
- Replying to [comment:3 jef]:
> Replying to "hdus":/issues/show/1855:
> > I want to load a postgis view layer defined ... -
- Replying to [comment:8 homann]:
> jef did a small adjustment, does it work now?
perfect! thanks! -
03:44 AM Bug report #1737 (Closed): node tool doesn't take respect to topological editing option
- Should be fixed in commit:cc05d674 (SVN r11283).
-
- Should be fixed in commit:cc05d674 (SVN r11283).
-
03:19 AM Feature request #1518 (Feedback): python binding does not link with libpython
- Patch against qgis 1.1 (I couldn't find any information on how to checkout svn tarball)...
-
- Patch against qgis 1.1 (I couldn't find any information on how to checkout svn tarball)...
-
- Replying to [comment:21 neteler]:
> I have recompiled the current unpatched trunk and it now compiles on Mandriva 200... -
- I have recompiled the current unpatched trunk and it now compiles on Mandriva 2009.1.
2009-08-05
-
01:49 AM Feature request #1518: python binding does not link with libpython
- Sorry for the mistake, I did a try without the patch and with rev 11281 but still get the undefined references. I try...
-
- Replying to [comment:18 jrm]:
> + echo 'Patch #3906 (qgis_1.0.0-linkage.patch):'
> Patch #3906 (qgis_1.0.0-linkage.p... -
- Replying to [comment:18 jrm]:
> + echo 'Patch #3906 (qgis_1.0.0-linkage.patch):'
> Patch #3906 (qgis_1.0.0-linkage.p... -
08:37 PM Bug report #1752: Font label settings not working on OS X
- Great work, Tom. This does get around the issue. I agree that it is probably a qt bug, which has been my hunch. I cou...
-
- This appears to be a Qt bug. The new native Mac font dialog seems to work (for some fonts) only in 64-bit builds. The...
-
- Here's a possibility: the font selection now uses the system font dialog:
> QFileDialog
> On Mac, native dialogs ar... -
- jef did a small adjustment, does it work now?
-
- foul ball! :)...
-
- Three strikes and out! commit:b4f7e942 (SVN r11278)
-
- seems I'm getting the same error...
-
- Okay, tried a different approach in commit:b4774285 (SVN r11277)
-
- Okay, tried a different approach in commit:b4774285 (SVN r11277)
-
- I don't know if it was this fix, but right now I cannot compile (commit:ca0b14db (SVN r11276))...
-
- Added a fix in commit:ca0b14db (SVN r11276).
-
- I'm using Ubuntu 9.04 too. Tried hard but still no "lucky" :) reproducing the issue.
-
- Hi lutra and homann, I'm using Ubuntu 9.04, I did a 'svn update' 12 hours ago. Yes, it seems hard to replicate, I'll ...
-
- I cannot replicate it either. What system are you on? What revision are you compiling?
-
- I think the '#include <cmath>' in qgis.h is not used anywhere. So I removed it and added the ifdefs in commit:3ddd179...
-
- I think the '#include <cmath>' in qgis.h is not used anywhere. So I removed it and added the ifdefs in commit:3ddd179...
-
05:14 AM Bug report #1654 (Closed): SIGNAL ( activated ()) in plugins is deprecated and cause plugins malf...
- added a small section to the "Writing a QGIS Plugin in Python" section of the coding & compilation guide.
Otto -
- added a small section to the "Writing a QGIS Plugin in Python" section of the coding & compilation guide.
Otto -
03:50 AM Bug report #1737 (Feedback): node tool doesn't take respect to topological editing option
- There is still one issue remaining: if you add a new vertex to a shared boundary, the same should be added to the adj...
-
- There is still one issue remaining: if you add a new vertex to a shared boundary, the same should be added to the adj...
-
- Seems to me that the node tool now take respect of topology, at least on the latest revision. Please reopen if necess...
-
- Seems to me that the node tool now take respect of topology, at least on the latest revision. Please reopen if necess...
2009-08-04
-
- I gave a closer look to this and I have to admit that at the end it works, at least with the latest development versi...
-
- I gave a closer look to this and I have to admit that at the end it works, at least with the latest development versi...
-
- Hi,
what is the status of this ticket? still a issue with the latest versions of qgis?
Do you have a public url tha... -
- works for me under commit:951d2a5b (SVN r11271).
Thanks!
-
- Replying to [comment:5 lutra]:
> As a fact I applied the patch to a more recent version (I don't remember exactly, I ... -
- Replying to [comment:4 smizuno]:
> I will check further.
>
thanks.
As a fact I applied the patch to a more rece... -
- I'll change this to enhancement. Furthermore if the maps are not be rendered when added to the canvas, an option to d...
-
- Still a problem under the latest trunk (rev. 11270).
-
- $ rpmbuild -ba qgis_trunk.spec
Exécution_de(%prep): /bin/sh -e /home/jrm/rpm/tmp/rpm-tmp.z46fV4
+ umask 022
+ cd /... -
- Replying to [comment:16 jrm]:
> Hi, I did a try against mandriva's cooker (python-qt4-4.5.2, python-sip-4.8.2, qt4-co... -
- Hi, I did a try against mandriva's cooker (python-qt4-4.5.2, python-sip-4.8.2, qt4-common-4.5.2), qgis version 1.0 sv...
-
- Hi Agus,
well, now we know that Ctrl++ and Ctr+- do not zoom at all and it is on purpose (#1824), I guess this ticke... -
- Hi Agus,
well, now we know that Ctrl++ and Ctr+- do not zoom at all and it is on purpose (#1824), I guess this ticke... -
- Hi,
on my box I cannot replicate it. This can be good news... or not. I tried hard for a few minutes with three poly... -
- Sorry, I don't like to open this kind of tickets.
There is a bad behavior on new legend GUI, the major problem is t... -
- Unfortunately, did not fix this problem.
-
- Ah, after updating to Qt 4.5(.2), font selection now does not work for me either.
-
- ... though the qgis.h change is global (the rest of Qgis compilation seems to be OK with it). Everything else in Qgi...
-
- ...and in Point3D.h and Vector3D.h. Then it compiles.
Summary: change #include <cmath> in qgis.h, [[MathUtils]].h, ... -
- I think it is because qgstininterpolator.h includes [[DualEdgeTriangulation]].h and that includes [[MathUtlis]].h (wh...
-
- [jef] wrote on the dev list:
> http://trac.osgeo.org/geos/ticket/270 might also relate to that.
> Does replacing
... -
- Hi,
I just tested a Idrisi .rst DEM and it was imported without problems
in GRASS. Used qgis >= 1.1 under both windo... -
- Hi,
I just tested a Idrisi .rst DEM and it was imported without problems
in GRASS. Used qgis >= 1.1 under both windo... -
- Hi Agus,
maybe I have not understand your request, but the possibility to set a shortcut for "select features" in "e... -
- Hi Agus,
maybe I have not understand your request, but the possibility to set a shortcut for "select features" in "e... -
- Replying to [comment:4 borysiasty]:
> They don't zoom and it's intentional - they just activate the mouse zoom tool.
... -
- Replying to [comment:4 borysiasty]:
> They don't zoom and it's intentional - they just activate the mouse zoom tool.
... -
- They don't zoom and it's intentional - they just activate the mouse zoom tool.
-
- it doesn't zoom and changing the shortcuts doesn't solve the problem.
-
- Replying to [comment:6 homann]:
> but the layer is dropped first in the group.
The layer is dropped first in the gro... -
- Replying to [comment:6 homann]:
> but the layer is dropped first in the group.
The layer is dropped first in the gro... -
- I really cannot make to replicate this problem, tested both 32bit (windows and linux) and 64bit (linux) installations...
-
- I really cannot make to replicate this problem, tested both 32bit (windows and linux) and 64bit (linux) installations...
-
- If the path to the [[SpatiaLite]] database contains the Cyrillic letters, then impossible to load any table from this...
-
- Seems that the plugin has been updated and now works fine. Reopen if necessary.
-
- Seems that the plugin has been updated and now works fine. Reopen if necessary.
-
- Closing for lack of feedback. Reopen if necessary.
-
- Closing for lack of feedback. Reopen if necessary.
-
- Fixed in commit:89818278 (SVN r11264). Turned off rendering instead of blocking signals :-)
Thanks for the idea. -
- Fixed in commit:89818278 (SVN r11264). Turned off rendering instead of blocking signals :-)
Thanks for the idea. -
> I meant bugfix patches or feature patches.
right. I get it right after my last reply. Sorry for that, I'm not yet...-
- Replying to [comment:22 lutra]:
> For what I see here
>
> https://trac.osgeo.org/qgis/log/trunk
>
> patches, but I ... -
- Replying to [comment:22 lutra]:
> For what I see here
>
> https://trac.osgeo.org/qgis/log/trunk
>
> patches, but I ... -
- Replying to [comment:17 homann]:
> Well, there is functionality to drag and drop the "Files" and the files below it.... -
- Replying to [comment:14 lutra]:
> Replying to [comment:13 homann]:
> > Maybe, but it clashes with the fact that some ... -
03:01 AM Feature request #566: Load multiple GRASS maps into QGIS
- Replying to [comment:8 lutra]:
> Replying to [comment:7 nikos]:
> > Is this meant to work _only_ from within the gra... -
- It means that if there is no information about the CRS for *the layer*, what to do then?
As long as you don't have p... -
- It means that if there is no information about the CRS for *the layer*, what to do then?
As long as you don't have p... -
- added a QGIS tip to the user guide and changed the ticket to enhancement.
Otto
2009-08-03
-
- For what I see here
https://trac.osgeo.org/qgis/log/trunk
patches, but I may be wrong. -
- Replying to [comment:19 lutra]:
> > sure, but we entered feature freeze.
> Right, I forgot it. By the way, other pa... -
- It would be sad to miss that in 1.2.0 (since it even works in 1.0.x). This is a key feature in daily GIS work.
-
>
> sure, but we entered feature freeze.
Right, I forgot it. By the way, other patches have been applied after th...-
-
- Replying to [comment:16 lutra]:
> Replying to [comment:13 jef]:
>
> this patch have yet to be committed or am I wron... -
- Replying to [comment:13 jef]:
this patch have yet to be committed or am I wrong? -
- Hi!
homann is working on changes in the legend gui (see #1815), so he may be interested in this ticket and should be... -
- I think Show/Hide all layers are really slow methods (prove it with 4 or 5 heavy layers). The users can see every lay...
-
- Replying to [comment:7 nikos]:
> Hi!
> Is this meant to work _only_ from within the grass-toolbox?
>
yes, this fix ... -
- Hi!
I use qgis 1.2.0 unstable and can't load multiple grass-rasters. Is this meant to work _only_ from within the gr... -
- We added a [[PostGIS]] subsubsection to the QGIS manual for 1.2 release. Thanks for testting and to Giovanni for the ...
-
- We added a [[PostGIS]] subsubsection to the QGIS manual for 1.2 release. Thanks for testting and to Giovanni for the ...
-
- Replying to [comment:3 lutra]:
> I tried your patch, I applied it and qgis compiled fine and worked the first time, t... -
- Applied in with modifications (kept [[QgsOGRProvider]]::featureAtId consistent with [[QgsOGRProvider]]::nextFeature)...
-
- Applied in with modifications (kept [[QgsOGRProvider]]::featureAtId consistent with [[QgsOGRProvider]]::nextFeature)...
-
12:21 PM Feature request #1815: New GUI for legend
- Replying to [comment:11 lutra]:
> it would be enough just to use multiple selection to remove/unselect multiple laye... -
- Replying to "hdus":/issues/show/1855:
> I want to load a postgis view layer defined in a way that the OID represents ... -
- svn commit:cbf7cf64 (SVN r11253)
kubuntu 9.04
postgres 8.4.0 -
- Hi,
what version of qgis are you using? platform? -
- I want to load a postgis view layer defined in a way that the OID represents the primary key of the view query result...
2009-08-02
-
- Applied in commit:556be42c (SVN r11256). Thanks!
-
- Applied in commit:556be42c (SVN r11256). Thanks!
-
- Hi lutra, yes, there was added an event handler to correct this problem.
-
- Hi gcarrillo,
seems to me that this problem has been already solved (at least in qgis 1.2/trunk) or your patch alrea... -
- Hi gcarrillo,
seems to me that this problem has been already solved (at least in qgis 1.2/trunk) or your patch alrea... -
- I think the exaggerated zoom depends on what scale are your data.
Maybe the scale factor could be a relative factor ... -
- Replying to [comment:14 lutra]:
> Replying to [comment:13 homann]:
> > Maybe, but it clashes with the fact that some ... -
- Replying to [comment:13 homann]:
> Maybe, but it clashes with the fact that some people don't want symbology lines to... -
- Maybe, but it clashes with the fact that some people don't want symbology lines to be selectable (because they can't ...
-
- Replying to [comment:10 homann]:
> Okay, I added scrolling in commit:2cb735bf (SVN r11238). Only tested on Ubuntu. Le... -
- Replying to [comment:14 neteler]:
> On Mandriva 2009.1, I have python-sip-4.7.9-3, python-qt4-4.4.4-6 and qt4-common-... -
- On Mandriva 2009.1, I have python-sip-4.7.9-3, python-qt4-4.4.4-6 and qt4-common-4.5.2-1.3. Your version seems to be ...
-
- Replying to [comment:12 lutra]:
> Replying to [comment:11 neteler]:
> > Did you try to compile with LDFLAGS="-Wl,--as... -
- Replying to [comment:11 neteler]:
> Did you try to compile with LDFLAGS="-Wl,--as-needed -Wl,--no-undefined" on an e.... -
- Did you try to compile with LDFLAGS="-Wl,--as-needed -Wl,--no-undefined" on an e.g. Ubuntu box?
-
- Hi,
what is the status of this patch now we are closing in to feature freeze for qgis 1.2? -
- I recall communicating with the dev of this plugin a while back. When it did not get fixed, I removed it from the plu...
-
- ... but then, as I recall you've been using Qt 4.5 for a while, and this is the first time you've had this error? Wh...
-
- William - I was coming to that same realization. I was about to post a similar comment about qt versions as well. I'm...
-
- OK, I see that isnan has been in qgsinterpolator.cpp since February (fixed for OSX in March), and I haven't had a pro...
-
- The new address of the cpt-city site seems now to be this
http://soliton.vm.bytemark.co.uk/pub/cpt-city/
By the way... -
- The patch works.
The second part of the patch seems to have been already implemented somehow. It remains to apply th... -
- Replying to [comment:8 jef]:
> fixed in commit:70bf84b1 (SVN r11244)
thanks, works fine -
-
> I introduced a function to compare doubles yesterday. makes use of that now.
works for me -
-
> I introduced a function to compare doubles yesterday. makes use of that now.
works for me
2009-08-01
-
- Replying to [comment:6 gcarrillo]:
> Thanks lutra, just a thing: The patch contains the function isEqual, which can b... -
- Thanks lutra, just a thing: The patch contains the function isEqual, which can be useful to other classes in spite of...
-
- Replying to [comment:4 lutra]:
> I'll give it a try and I will report back.
the patch works for me under Ubuntu 9.04 -
- I gave another look, and at the end it seems I was wrong, in fact I noticed now that if I leave the "restrict changes...
-
- Hi,
I gave a better look/try to #1703 and it seems to me that it also fixes the small problem that lead you to creat... -
- fixed in commit:70bf84b1 (SVN r11244)
-
- Lutra, the new bug (old classes don't disappear) is also in QGis 1.1.
-
- I noticed also that in the unique values symbology, the values of numeric fields are ordered like strings. Don't know...
-
- it is not really necessary to change a style option, in fact it is just enough to have one class *selected* and then,...
-
- Hi Jurgen,
I maybe noticed a bug in the symbology but I don't know if it was there before applying this patch or if ... -
-
- yes, you're right
-
- yes, you're right
-
- This is related to the Gary's plugin? If this is, please reopen the ticket because I have a suggestion :)
I think t... -
- Excellent: works both in https://svn.osgeo.org/qgis/branches/Version-1_0 and trunk (using Mandriva 64bit).
-
- works for me under Ubuntu 9.04
-
- Sorry jef. Even now I don't see the difference clearly.
-
08:59 PM Bug report #1854: qgisinterpolator.cpp causing build error on OS X
- Cmake build works fine on OS X for me at commit:06ce0aa4 (SVN r11243)
-
- P.S. it's also showing up in qgsinterpolator.cpp.
-
- I just tried building after commit:7bc1a64e (SVN r11239), using the Xcode build -- same error.
-
- From the most current svn, I cannot build successfully on OS X. The error message is:
...
[ 68%] Building CXX object ... -
- I tested again this issue with commit:06ce0aa4 (SVN r11243) and this time QGis don't crash. Thanks.
-
- Hi,
I tried your patch, I applied it and qgis compiled fine and worked the first time, then it started to giving me ... -
- I also tested the patch and it works fine, fixing this annoyance.
-
- I like also the gvsig way, that uses for outlines a darker color of the same tone used for fill the polygon. This giv...
-
- Replying to [comment:9 homann]:
> Selecting multiple layers is easy. The hard part is to decided what can be done wi... -
- Okay, I added scrolling in commit:2cb735bf (SVN r11238). Only tested on Ubuntu. Let me know how it works on toher OS:es.
-
- The autoscroll is in planning, the one-liner I tried *almost* worked... :-)
Auto-expansion I don't know. Neat, but r... -
- I first thought you meant the metadata tab from the layer properties. That's copyable.
If you mean the identify resu... -
- I first thought you meant the metadata tab from the layer properties. That's copyable.
If you mean the identify resu... -
- When getting the info for a layer (raster or vector), it is not possible to copy the information contained in the pop...
2009-07-31
-
- this is a major improvement to me. I guess we just miss multiple selections, than it would be perfect. Thanks a lot.
-
- The messing up of order should be fixed in commit:97da8f50 (SVN r11234).
-
- The messing up of order should be fixed in commit:97da8f50 (SVN r11234).
-
- and what about multiple layer selection? we actually miss it in the standard legend.
-
- I was able to test on the Mac using: 'qmake -project' then 'xcodebuild'. treewidget.app is available in the build dir...
-
- Please have a look at the attached jpg (right side).
Solved just by enlarging the coordinate capture window, which is... -
- Please have a look at the attached jpg (right side).
Solved just by enlarging the coordinate capture window, which is... -
- Hi,
it works fine for me under qgis 1.2 from trunk. Can you please attach some data in order try replicate the problem? -
- Sorry,
"2. Projected Coordinates are not identical to the ones reported in the main window"
is not true.
Please igno... -
- 1. Load 3+ bands raster (say 6 bands Landsat), set 5-4-3 to default
2. Try to load 3 bands raster.
Nothing show up.... -
- Replying to [comment:3 lutra]:
> Replying to [comment:2 dassouki]:
>
> > Even if i click on custom, i can't change t... -
- Replying to [comment:2 dassouki]:
> Even if i click on custom, i can't change the units
>
yes, this is a know bug ... -
12:28 PM Feature request #1838: Include american size papers
- I'll install 1.2 at home, but on 1.1
i have:
A5 through B0, Letter and Legal.
Even if i click on custom, i can't chan... -
- Already available
-
- Already available
-
- I was wondering if its possible to include american paper sizes to print composer (11 x 17), (22 x 34) so on ...
-
- fixed in commit:7423b30a (SVN r11237)
-
- fixed in commit:7423b30a (SVN r11237)
-
- The groups does not open anymore since commit:97da8f50 (SVN r11234), but the layer is dropped first in the group. Let...
-
- on qgis 1.2 I cannot replicate the problem (under both linux and windows), even adding a quite big number of layers o...
-
- if you can, make the layers available for the download, so we can try replicate the problem.
-
- Please add detail: which version? Which OS? Which package? I cannot replicate it here
-
- sometimes print composer crashes with big maps or when i don't give it room to breathe. would it be possible to move ...
-
- in commit:bf616cb0 (SVN r11230) the lock change only common attribute can temporarily be disabled through a checkbox ...
-
- in commit:bf616cb0 (SVN r11230) the lock change only common attribute can temporarily be disabled through a checkbox ...
-
- i'm not saying it should become a drawing tool, rather a simple feature to make life a bit easier.
Replying to [comm... -
- I do not think map composer will ever become a fully fledged drawing tool. For this, the best option is to save your ...
-
- I do not think map composer will ever become a fully fledged drawing tool. For this, the best option is to save your ...
-
- I was wondering if it is possible to add a drawing toolbox that includes different circles, lines and linetypes.
For ... -
- Replying to [comment:2 dassouki]:
> Replying to [comment:1 pcav]:
> "730 and [https://trac.osgeo.org/qgis/ticket/192"... -
- You may add how many north arrows you want as images.
What is a "map box"? -
- Replying to [comment:1 pcav]:
"730 and [https://trac.osgeo.org/qgis/ticket/192":https://trac.osgeo.org/qgis/ticket/73... -
-
- Is it possible to add an automatic north arrow to every map box in map composer?
-
- What do you mean for "mapbox"? and for "automatic scalebar"?
-
- Is it possible to an automatic scalebar to a mapbox in map composer? The one provided is not automatic, and has to be...
-
- I don't get it. Can you please elaborate?
You would like a button in the print composer just to remember you if you ... -
- a SRS button shows the used projection whether it's on the fly or not
-
- Hi,
let me see if I get it.
Add a vector to qgis, style it, save the style to a .qml file, then open the style file... -
- if i edit a style file, all layers associtated with it should change accordingly
-
- Please give it try when you can. You can install it easly with the osgeo4w installer under windows or compiling sourc...
-
- I haven't tried it in 1.2 since i can't download it at work. My issue related to 1.1 (grey line) and 1.0.2 (black li...
-
- I cannot reproduce this on qgis 1.2 trunk. Are you using the development version? If not, please give it a try and re...
-
- I cannot reproduce this on qgis 1.2 trunk. Are you using the development version? If not, please give it a try and re...
-
- i notice that although i disable a frame, it sometimes prints on the left side of the paper (portrait), and top in la...
-
- Replying to [comment:1 gcarrillo]:
> It is a duplicated ticket, see #1703.
only partly. -
- Replying to [comment:1 gcarrillo]:
> It is a duplicated ticket, see #1703.
only partly. -
- Replying to "dassouki":/issues/show/1851:
> sometimes, a line layer can have 40 different classications; however, i'd... -
- Replying to "dassouki":/issues/show/1851:
> sometimes, a line layer can have 40 different classications; however, i'd... -
-
- It is a duplicated ticket, see #1703.
-
- sometimes, a line layer can have 40 different classications; however, i'd like to have the first 20 to have a similar...
-
- layer -> properties -> "load style" and/or "save style".
Please reopen if this was not you were looking for. -
- layer -> properties -> "load style" and/or "save style".
Please reopen if this was not you were looking for. -
- i was wondering if it's possible to have multiple distinct styles for a layer in canvas. Right now, i add the same la...
-
- In the new print composer (latest qgis versions), you can save print composer templates. This pretty much solve your ...
-
- In the new print composer (latest qgis versions), you can save print composer templates. This pretty much solve your ...
-
- Sometimes i need to produced more than one map from the same file. What i end up doing is resaving the project a mult...
-
- duplicate of #1648
When opening tickets please check for eventual duplicates. -
- duplicate of #1648
When opening tickets please check for eventual duplicates. -
- I was wondering if a feauture to rotate the map box could be added. I don't want to rotate the whole map by changing ...
-
- Which version are you using? This most probably refers to an old version: many improvements are in trunk which speed ...
-
- Which version are you using? This most probably refers to an old version: many improvements are in trunk which speed ...
-
- sorting a large table can take a long time. I was wondering if it is possible to put it on its own thread that way i ...
-
-
- i was wondering if it is possible to add a feature to print composer that allows a user to select via a selection too...
-
- You define all this in the canvas, then you find it in the maop composer. It seems pointless to have the same funcion...
-
- You define all this in the canvas, then you find it in the maop composer. It seems pointless to have the same funcion...
-
- i was wondering if it is possible to add a feature to print composer that allows me to specify the exact density, and...
-
- Already present
-
- Already present
-
- It'll be a good idea to add a feature such as a combo box to select which layers are to be printed.
-
- Images can be added to the composer
-
- Images can be added to the composer
-
- for my road layers, i have a certain template, that i'd like to use, and another one for my zonnin layer. I have a dx...
-
-
- i was wondering if it is possible to add a feature to map composer that allows users to move mapcanvas labels. Someti...
-
- would it be possible to change the label editor into an RTF one?
-
- i was wondering if it's possible to add a horizontal capability for the legend in print composer
-
- Duplicated in #1183
-
- Duplicate of #385
-
- Duplicate of #385
-
- Agree! It would be useful also for non-field work I think.
Note that for some keyboards Ctrl++ is actually Ctrl+Shi... -
- Shortcuts Ctrl++ and Ctrl+-
just change to a @+ or - sign, but do not
actually zoom -
- This can be done from the browser (see the new contextual menu). Closing it for now, reopen it if necessary
-
- This can be done from the browser (see the new contextual menu). Closing it for now, reopen it if necessary
-
- Partial duplicate of #40
-
- Partial duplicate of #40
-
- Partially duplicated in #1279 (see)
-
- Sometimes a line/polygon layer will have 50+ different classifications, too which, I’d only want to show one or two. ...
-
- I would like to have a context menu (right click menu) for different print composer objects. It would include items, ...
-
- Would it be possible to implement edit undo capabilities for map composer? Sometimes I accidently resize a box, or tr...
-
- Create "For in the field" mode and "For in the office" mode by
defining sets of keyboard shortcuts and other interac... -
- A Keyboard shortcut for selection (alternative to left button click with the mouse, ie., Ctrl+Enter) would
be handy f... -
- Fixed in commit:e00cfa7b (SVN r11226). The spatial index is now recreated if geometry changes are commited. Note that...
-
- Fixed in commit:e00cfa7b (SVN r11226). The spatial index is now recreated if geometry changes are commited. Note that...
-
- Keyboard shortcuts (i.e. Ctrl+ ->) for moving the cursor
with no mouse, adding a cross-hair would be handy.
We could... -
- At least optionally, recenter to current cursor position
at zooming with keyboard shortcuts Ctrl++ and Ctr+- -
- Would it be possible to get the point marked with a circle or something so that you can fine tune the zoom and pan, a...
-
- Duplicate of #1588
-
- Duplicate of #1588
-
I'm getting a weird behaviour with "zoom to point", I get
an exaggerated zoom unless I set values around 90 (qgis 1....
2009-07-30
-
- 1. The 3 first digits of the X (projected) coordinate
are not displayed, but the saved to clipboard coordinates are ... -
- fixed in commit:16b91c6b (SVN r11219)
-
- fixed in commit:16b91c6b (SVN r11219)
-
- fixed in commit:16b91c6b (SVN r11219)
-
- fixed in commit:16b91c6b (SVN r11219)
-
-
- So I guess this could be closed. Please reopen if necessary.
-
- So I guess this could be closed. Please reopen if necessary.
-
- Hi,
what is the status of this issue?
cheers -
- The plugin entered in svn, closing.
-
- The plugin entered in svn, closing.
2009-07-29
-
- Right, I was too quick with closing :-)
Committed now in . -
- but it wasn't yet committed, right?
-
- Ok, so I'm closing this ticket.
-
- Ok, so I'm closing this ticket.
-
- The pacth works for me (ubuntu 9.04, qgis rev. 11201).
-
- Hi,
It is pretty easy to reproduce the crash (rev. 11186), see this
http://www.faunalia.pt/downloads/qgis_legend_cr... -
- Hi
I don't have the crash on my system, only the move of the legend layer file to the symbology section. 'legendpatc... -
-
> We also can get raster (MrSID) aerials translated to TIFF files and imported into QGIS, but when laying these... -
- Hi,
Replying to "peterk":/issues/show/1820:
> Sorry. I was not aware of the user mailing list and will use it from n... -
- Hi,
Replying to "peterk":/issues/show/1820:
> Sorry. I was not aware of the user mailing list and will use it from n... -
01:24 PM Bug report #1820 (Closed): Sorry.
- Sorry. I was not aware of the user mailing list and will use it from now on unless we suspect a bug. I just don't kno...
-
- I think that this is invalid: the issue is having 64bit win Vista packages. We can say Vista @ 64 bit is not supporte...
-
- I think that this is invalid: the issue is having 64bit win Vista packages. We can say Vista @ 64 bit is not supporte...
-
- PS
the TRAC is for bug reporting, not for asking support. Use intead the user mailing list. -
- PS
the TRAC is for bug reporting, not for asking support. Use intead the user mailing list. -
- No,
this means that you must have all the raster in the same crs, the you can put whatever vector data on it, becaus... -
- Does that mean that you can not place GPS coordinates on an aerial in QGIS?
-
- Reprojection is not supported for rasters
-
- Reprojection is not supported for rasters
-
- Using KORE v1.02 for OS X. Raster file (mrSId aerial) saved as TIFF has problem with CRS set in WGS 84. Please advise...
-
- Hi,
unfortunately is a known problem, see #1433. Hopefully it will be solved soon. -
- Hi,
unfortunately is a known problem, see #1433. Hopefully it will be solved soon. -
- Kore v. 1.02 for OSX. Have file with multiple vector layers in WGS84. Set scale in feet. Scale bar shows 1.2 inches f...
-
- Applied in commit:93c849dc (SVN r11203). Thanks, gcarillo!
-
- Applied in commit:93c849dc (SVN r11203). Thanks, gcarillo!
-
- I think commit:247dd62e (SVN r11202) fixes this issue. Please reopen this bug if it isn't.
-
- I think commit:247dd62e (SVN r11202) fixes this issue. Please reopen this bug if it isn't.
-
- fixed in commit:baaec205 (SVN r11201)
-
- fixed in commit:baaec205 (SVN r11201)
-
- I'm following:
http://trac.osgeo.org/grass/wiki/HowToTestGrass6
All fine, but for the fact that the calculated ndvi m...
2009-07-28
-
- Like it! as a couple of qgis *users* around here do.
Please consider also #1439, should be fixed also in this new gui. -
- I like it, but it's better to use QTreeView in my opinion, too.
About the look&feel, don't worry, we can use a custom... -
- Good points Martin! Using QTreeView is a bit more work, I think. The look-n-feel is probably not dependant on which w...
-
- Looks good.
Just a note: when dragging an item completely away (out of the window) it will be placed to the bottom. ... -
- Replying to [comment:1 homann]:
> Also #1808 relates to this issue, and will most probably be fixed.
I mean #1637 -
- Also #1808 relates to this issue, and will most probably be fixed.
-
- The GUI for legends has a hard to find bug #699. It is also somewhat confusing when moving layers, and the layers kee...
-
- The plugin "Value Tool" do this, even display a graphic. Over the status bar it would be hard to show for rasters mul...
-
- Without really knowing how, it appears to have been fixed in commit:a3c73889 (SVN r11193). Re-open if not.
-
- Without really knowing how, it appears to have been fixed in commit:a3c73889 (SVN r11193). Re-open if not.
-
- Ok, I'm going to "fix" it soon :D
-
- Replying to [comment:1 rugginoso]:
> We could add a "Refresh" button to the table visualization.
> Feedback?
+1
thi... -
- The number of vertices for circular buffers is too low (when creating a buffer around a point). Apparently 24 vertice...
-
- Currently, QGIS seems to be unable to connect to WFS servers with NTLM authentication.
We have discovered that the M... -
- When opening the WFS dialog window it refers to WMS... please use WFS also here (see attached screenshot).
-
- Replying to [comment:18 jctull]:
> There seems to be a speed-sensitivity trigger that causes the legend mangling. If ... -
- Hi,
this doesn't happens on qgis 1.2, and as it will be released soon as the new stable release (and then the fixes ... -
- Hi,
this doesn't happens on qgis 1.2, and as it will be released soon as the new stable release (and then the fixes ... -
02:42 AM Bug report #1811 (Closed): Options->Locale->Override system locale: choice of en_US disappears af...
- Using 1.0.2: When overriding the system locale to choose another language, the choice of en_US disappears. You have t...
2009-07-27
-
12:13 AM Bug report #1643: Raster: Problems displaying Int16 grayscale image
- Hi,
in attachment the gdalinfo log of my example which produce a black image (file : gdalinfo_qb_road_extract.log).
... -
08:14 PM Bug report #1643 (In Progress): Raster: Problems displaying Int16 grayscale image
- Can someone post me the output from gdalinfo on an image they are having problems with? Also please let me know how t...
-
- Replying to [comment:5 warmerdam]:
> We could also build overviews on the underlying image *however* at this time the... -
- Overviews can actually be built on vrt warped images *however* that doesn't work in the QGIS case where the warped VR...
-
- I think the pyramids should be built for the base raster.
-
- This is because the image is warped when it is loaded and considered a 'warped virtual dataset'. The image being draw...
-
- I guess this is really outdated, but please reopen if I'm wrong.
-
- I guess this is really outdated, but please reopen if I'm wrong.
-
-
- Sorry for reopening this one, but seems that the bug is still there in grass vector attribute tables. It sorts every ...
-
- Sorry for reopening this one, but seems that the bug is still there in grass vector attribute tables. It sorts every ...
-
- fixed in commit:1c3390e1 (SVN r11190)
-
- fixed in commit:1c3390e1 (SVN r11190)
-
- The patch has been applied, commit:1c15572f (SVN r11188).
Thanks rouault. -
- The patch has been applied, commit:1c15572f (SVN r11188).
Thanks rouault. -
- Replying to [comment:5 pcav]:
> How do other clients behave in such a case?
Well... I made a couple of tests with ... -
- fixed in commit:9cb3b3ff (SVN r11187)
-
- fixed in commit:9cb3b3ff (SVN r11187)
-
- Fixed in commit:1e53f585 (SVN r11186).
-
- Fixed in commit:1e53f585 (SVN r11186).
-
06:16 AM Feature request #1810 (Closed): PostGIS connections keepalive
- I've experienced frequent [[PostGIS]] layers' connections breaking using ADSL connection. After a brief inactivity (a...
2009-07-26
-
- Replying to [comment:9 kumba]:
> In addition to getting stuck at libjpeg's compile phase,
Hi,
you may want to ask... -
- Now in the attached photo, it's hard to see exactly (because Windows "fades" a crashed application until you kill it)...
-
- Ah, it seems Trac here dislikes certain kinds of formatting....
-
- Murphy is my shadow. Sitting there selecting roads in a layer for Montgomery County, MD, and I thought "I'll bet it'...
-
- I gave a shot at setting up a compile environment, but further inspection reveals that may not solve anything. In ad...
-
- Replying to [comment:6 kumba]:
> Should I try the 1.2 nightlies? (Assuming 1.2 is the nightly stuff you've reference... -
- Well, my little bulleted list got muddled there. Here's a better copy:
* Layer window still functions, can be moved... -
- Just ran into this again. Interestingly enough, it did not crash this time. I played around in what was left of the...
-
- Hi again,
using qgis 32 bit on vista 32 bit might hide the bug... or not. It would be indeed better to test a versio... -
- Also, try making sure you have the option "Make lines appear less jagged at the expense of some drawing performance",...
-
- I'm not sure if one set of shapefiles is sufficient to replicate this or not. Also testing on 32bit might indeed hid...
-
- PS
a recent thread in the grass-user mailing list remembered me (that I'm not used to 64 bit o.s./applications) that... -
- Hi,
I downloaded the Nantucket shapefiles, played around a bit, made a few basic geoprocessing operations and... I c... -
- Good to know - thanks smizuno. I close it as invalid, as it is outside the scope of QGIS devs; please reopen it if ap...
-
- Good to know - thanks smizuno. I close it as invalid, as it is outside the scope of QGIS devs; please reopen it if ap...
-
- I have seen this on Windows XP and Vista 32-bit. I have also seen Qt development tools, such as Assistant, do the sam...
-
- Hi,
I believe you, I just say I'm not "able" to replicate this on Vista 32 bit with both qgis 1.2 and 1.0.2
Now man... -
- Th attached image is right after I've turned on my monitor this morning/afternoon, looked at my e-mail and saw this c...
-
- Hi,
three hours now since I started qgis 1.0.2 and 1.2 under Vista 32 bit (and qgis 1.2 under Xp) opened a project a... -
> If there is additional debugging output that I can provide, please let me know.
Hi,
what version of qgis that ...-
- Sure, I think I can do that. I started my project using random folders for some of the layers however, so I plan on ...
-
- Hi,
ok I understand. Please if in the following weeks you'll have the chance to install qgis on a vista/linux operat... -
- My only other working machine is my Gentoo Linux server, and it doesn't not utilize any of the X11 software. It runs...
-
- Hi again,
as for the other tickets you opened recently I would ask you to test qgis on other machines with your usua... -
- The file/image I just uploaded still depicts this behavior after I was able to run QGIS without incident for several ...
-
- Hi,
I cannot replicate the problem on QGIS 1.0,2 and 1.2 installed with the osgeo4w installer on Vista 32 bit and al... -
- To the original reporter, a trick I use to get around this, is create a "tmp" group folder, and when needing to organ...
2009-07-25
-
- This is duplicate of #1637
-
- This is duplicate of #1637
-
- When working in QGIS 1.1, I have found that when I add a new layer to the layer stack, and later try to move it down ...
-
- I tend to keep QGIS open for days at a time on my Windows system. I've noticed that every hour or so, QGIS will turn...
-
- layerbug1 shows the state of the layer window upon saving. As you can see, the folder group "wv-county2000" has all ...
-
- When exiting and restarting QGIS, or re-opening a project after a crash, QGIS 1.1 seems to not honor the state of lay...
-
- I've been using QGIS lately on a Windows platform, Server 2008 converted to workstation mode (basically Windows Vista...
-
04:07 PM Feature request #1167: SLD support in conjunction with WMS
- Got this when trying to build your patch against .
sipcoreQgsRasterLayer.cpp: In function ‘PyObject* meth_QgsRasterL... -
- The #1703 ask for new color buttons behavior (and others) when multiple classes are selected.
The code for this clas... -
- Hi,
thanks for the patch.
Have you seen #1703? Is this related? -
- On Unique Value Renderer, when I select multiple classes on the class list and edit a double setting (lineWidth or po...
2009-07-24
-
- maybe #1439 can be squeezed together with this one
-
- Replying to [comment:5 matter]:
> How did you get qGIS to "see" the symbols? I use qGIS in Linux, and When I add add... -
04:58 AM Feature request #746: more SVG symbols
- Replying to [comment:4 lutra]:
> Adding a few symbols (I tested 30/40) is not a big problem as qgis doesn't slow when... -
- Replying to [comment:3 matter]:
> So, this ticket has been open for 2 years. Is there at least a howto to replicate w... -
- Replying to [comment:5 gcontreras]:
> did you reproduce the error?
yes, I did make to reproduce the error on qgis 1... -
- No, I will do some more testing to try to find why the raster properties dialog for wms is very slow and why the conn...
-
- Can this be considered a patch?
-
- A workaround, yes.
I think the main cause here is the missing GRASS, possibly missing Python has the same result. T... -
02:37 AM Bug report #1804 (Closed): critical problems editing features on OSGeo4W Qgis
-
-
- Ouch! Tha'ts awful! It's due to the snapping options!
If I simply open and close the snapping tab inside the Project ... -
- Ouch! Tha'ts awful! It's due to the snapping options!
If I simply open and close the snapping tab inside the Project ...
2009-07-23
-
- Replying to [comment:15 ahayes]:
> Yep. Just tried installing GRASS.app 6.4 RC5-3 and its GDAL plug-in on my 10.4 sys... -
- I have seen this in the past, but I thought the problem was gone.
Not much I can do about it, it's completely myster... -
01:49 PM Bug report #1800: Missing GRASS crashes application
- Yes Peter. It's not ideal but installing both packages that come in the GRASS 6.4 installer worked for me. I'm sure W...
-
- Am I interpreting correctly? - Install Grass 6.4 (separate application) and plug in manager of QGIS for TIger 10.4.11...
-
- Yep. Just tried installing GRASS.app 6.4 RC5-3 and its GDAL plug-in on my 10.4 systems and I can now add plugins with...
-
- I had a chance to try it at work, where we use OSX 10.4. At first, OK. I have GRASS installed, so I renamed it so Q...
-
- I am having the same problem on 10.4.11 (but not on 10.5.7). I also tried removing all frameworks and installing them...
-
- It happens both on Stable and Unstable QGis on OSGeo4W distribution.
The editing tools don't handle correctly mouse e... -
- So, this ticket has been open for 2 years. Is there at least a howto to replicate what Tim noted?: "adding a large li...
-
- to start it would be enough to have a selector for the categories and then have just the symbols for that specific ca...
-
- Even better: it would be good to have a common repo for symbols (much like the one for python plugins), with the poss...
-
- Forget it, it worked also for polygons.
As for other cases, if there is no easy solution for problems such this one,... -
- Replying to [comment:3 g_j_m]:
> A work-around that I use a lot is to transform the longitude data to 0->360. If you... -
-
- see also #746 (partial duplicate)
-
- Update: I just added the complete set of Joints (4.3.x) as a zip file. Since we are adding so many symbols, I may del...
-
- Replying to [comment:2 lutra]:
> hi,
>
> a) is the plugin available somewhere?
>
> b) has this patch already been e... -
- Replying to [comment:2 lutra]:
> hi,
>
> a) is the plugin available somewhere?
>
> b) has this patch already been e...
2009-07-22
-
- Hi,
is this ticket outdated? -
- any chance to see this plugin as a core qgis plugin?
-
> This is with debug gompiled on, printing on the screen and slowing things down.
there are no problems (on 1.2) a...-
> The bug is very easy to reproduce. Again:
>
> 1. Add 5 Shapefile layers called l1-l5.
>
> 2. Set them in descend...-
- Here is the cast
http://www.faunalia.pt/downloads/699.mpeg
I agree that should be possible to put a layer outside/u... -
- There seems to be a speed-sensitivity trigger that causes the legend mangling. If you move items quickly across group...
-
- Hi,
I just compiled commit:6fbb9b44 (SVN r11148) and I cannot confirm again the problem. Almost.
Let see:
1) I can... -
- I can still see this happening in .
I think the best bet to fix this once and for all, is to not move the actualy na... -
- I can still see this happening in .
I think the best bet to fix this once and for all, is to not move the actualy na... -
- hi,
a) is the plugin available somewhere?
b) has this patch already been evaluated/committed by the devs?
-
- I assume that this was fixed, please reopen if necessary.
-
- I assume that this was fixed, please reopen if necessary.
-
- just putting any statement after the connect statement fixes the problem, I put the following line:
QString fix="qui... -
- Hi,
I've been using this two wms servers
* http://www.infraestructuragis.com/geoserver/wms
* http://www2.dmsolution... -
- Hi,
can you please a post a URL that can be used to test and try reproduce the error? -
- I loaded a wms layer in qgis version 1.1 and in a self compiled from trunk and did a double clic in the wms layer nam...
-
- Replying to [comment:4 pcav]:
> What happens if you stretch to min-max (raster properties)?
nothing change
> It's ju... -
- What happens if you stretch to min-max (raster properties)?
It's just a visualization problem? In this case, I would ... -
- Hi,
I confirme the bug.
A black image is displayed when I try to open a unint16 grayscale image (geotiff).
The bug ... -
- Tested with both shapefiles and postgis.
How to reproduce the problem:
*) download this shapefile of the world bord... -
- Tested again on different platforms and boxes, and seems fine. I close this, but please reopen if necessary.
-
- Tested again on different platforms and boxes, and seems fine. I close this, but please reopen if necessary.
-
- Tested again on different platforms and boxes, and seems fine, at least with the data in ecw format I have. I close t...
-
- Tested again on different platforms and boxes, and seems fine, at least with the data in ecw format I have. I close t...
-
- Hi!
Postgis Manager is the answer. Closing this ticket. -
- Hi!
Postgis Manager is the answer. Closing this ticket.
2009-07-21
-
- commit:4984c1c6 (SVN r11141) adds this (extended instead of multiselection) and the possiblity to add tables via doub...
-
- commit:4984c1c6 (SVN r11141) adds this (extended instead of multiselection) and the possiblity to add tables via doub...
-
02:19 PM Bug report #1801 (Closed): It is not possible to use Shift key to select multiple PostGIS tables
- It should be possible, in the Add Postgis Layer to select more layers using Shift key and clicking only on the first ...
-
- 1568_complete_fix.patch already contains the previous patch.
I've only coped with the possibility that the current se... -
- > crash report written to: /Users/pkrinsky/Library/Logs/CrashReporter/qgis.crash.log
This is what I'm looking for, w... -
- Jul 21 16:13:51 peter-krinskys-computer crashdumpr827: qgis crashed
Jul 21 16:13:51 peter-krinskys-computer crashdump... -
- I need the whole log for that crash. (make sure to enclose it with the triple-braces to format it better (see the [[W...
-
- EXC_BAD_INSTRUCTION (0x0002)
Code (0): 0x0000000d
Code (1): 0x00000000
-
- Log time. Run the Console.log application. Look for ~/Library/Logs/CrashReporter/Qgis.(crashlog I think).
Since th... -
- I downloaded Python 2.5 as you suggested. Same problem with Tiger in both Kore and Pan versions. Any "plug in manager...
-
- PS. similar for GRASS support: my Qgis is built with GRASS support, though this is an actual plugin, so you should be...
-
- > No additional python downloads, etc.
Well, all plugins require Python. And on OSX 10.4, an extra Python installat... -
- I'll add to ticket 3 OSX users, so they can help us find the problem.
-
- In response:
Quantum GIS, Kore v.1.02-3 for Mac OSX Tiger from http://www.kyngchaos.com/software:qgis
Just the bas... -
- Please add some details: what package did you install? From which source? Thanks.
-
- Using QGIS v. 1.02 Kore for Mac OS X Tiger v.10.4.11. Plug in manager crashes the application when any of the items a...
-
11:40 AM Bug report #1680: When exiting from the qgis GRASS shell, qgis overwrites ~/.grassrc6
- Replying to [comment:14 rugginoso]:
> Yes, I've found the problem: the startup script ($GISDATA/etc/Init.sh) make som... -
- Yes, I've found the problem: the startup script ($GISDATA/etc/Init.sh) make some cleanups when closing (see the line ...
-
- Please, try it again on a different linux box/installation to exclude problems with your local definitions/configurat...
-
11:14 AM Bug report #1798: X crashing while QGIS is loading a shapefile
- Here are logs at crash time (I use Gnome env) :
*cat /var/log/* | grep 19:55:17*
Jul 21 19:55:17 ringo seahorse-d...
2009-07-20
-
- I confirm: no crash on debian testing. Please check again if it is not a local problem. Reopen if necessary.
-
- I confirm: no crash on debian testing. Please check again if it is not a local problem. Reopen if necessary.
Also available in: Atom