Activity
From 2008-09-29 to 2008-10-28
2008-10-28
-
11:22 PM Feature request #1320: Projection Selector dialog changes for uniformity and clarity
- it is ok for the community team. We adapt the changes in the manual - no problem.
regards,
Otto -
01:24 PM Feature request #1320: Projection Selector dialog changes for uniformity and clarity
- Hi
I agree these are probably worth fixing - but you would need to get the OK from the community team folks to break... -
02:19 PM Bug report #967: CRS of a new shapefile doesn't match CRS of the project
- Replying to [comment:9 homann]:
> The functionality you are asking for is already in place.
>
> See the screen dump,... -
01:27 PM Bug report #967 (Closed): CRS of a new shapefile doesn't match CRS of the project
- The functionality you are asking for is already in place.
See the screen dump, selctiong the middle radio button set... -
- The functionality you are asking for is already in place.
See the screen dump, selctiong the middle radio button set... -
- Replying to [comment:7 homann]:
> Replying to [comment:6 msieczka]:
> > Replying to [comment:5 homann]:
> > > You can... -
- Replying to [comment:7 homann]:
> Replying to [comment:6 msieczka]:
> > Replying to [comment:5 homann]:
> > > You can... -
01:24 PM Bug report #1339: Can't set projection to WGS84 UTM Zone 15N
- Hello again,
I've just realised that the code above has been strangely formatted, it's meant to read like... -
- Hi Fernando,
Sorry for not getting back to you sooner, I have been away last week.
Using python console, I am now... -
- Per request https://trac.osgeo.org/qgis/ticket/699#comment:4 - the bug is partly fixed for me. Details:
> 1. add a g... -
10:04 AM Feature request #699: problem when moving quickly a layer trough the legend
- This is all greek to me!
I use windows and look for already compiled executables (I think that's what they are calle...
2008-10-27
-
12:58 AM Bug report #1379 (Closed): Map labels scaling problem
- Map labels may have weird character spacing and appear not antialiased in print output. It needs a workaround where f...
-
- See
http://wiki.qgis.org/qgiswiki/BuildingFromSource#head-8e1e1ff25b5e9f587393e0592c0ff34891ec07cc
If you check out... -
- Since I was one of the user who added comments to #825 (which was incorporated into #699 as a duplicate) I would like...
-
- I fiddled a bit with the logic in the legend. Can you see if any of these issues still exists after commit:acdbf8af (...
-
- Replying to [comment:6 msieczka]:
> Replying to [comment:5 homann]:
> > You can select if the CRS of the new layer sh... -
- Replying to [comment:6 msieczka]:
> Replying to [comment:5 homann]:
> > You can select if the CRS of the new layer sh... -
- Replying to [comment:5 homann]:
> You can select if the CRS of the new layer should be the global default, the projec... -
- Replying to [comment:5 homann]:
> You can select if the CRS of the new layer should be the global default, the projec... -
- You can select if the CRS of the new layer should be the global default, the project CRS or if it should ask for it. ...
-
- You can select if the CRS of the new layer should be the global default, the project CRS or if it should ask for it. ...
-
- Replying to [comment:1 homann]:
> What is the query tool? Do you mean identify (to get pixel values)?
Yes. And I can... -
- Replying to [comment:1 homann]:
> What is the query tool? Do you mean identify (to get pixel values)?
Yes. And I can... -
- What is the query tool? Do you mean identify (to get pixel values)?
-
- Good idea, added in commit:26ca54dc (SVN r9553). Thanks!
-
- Good idea, added in commit:26ca54dc (SVN r9553). Thanks!
-
- Is this to late to update, Tim?
-
- This is the intended behaviour.
Considering what happens if you first set the project CRS and then start adding lay... -
- This is the intended behaviour.
Considering what happens if you first set the project CRS and then start adding lay... -
- This looks like a duplicate of #699, so I close it. Chanegs has been made since commit:acdbf8af (SVN r9548), please t...
-
- This looks like a duplicate of #699, so I close it. Chanegs has been made since commit:acdbf8af (SVN r9548), please t...
-
- I suppose there was an error when changing CRS id numbers from previous versions of QGIS, and this somehow led to a f...
-
- I suppose there was an error when changing CRS id numbers from previous versions of QGIS, and this somehow led to a f...
-
- Fixed in commit:6d5261bd (SVN r9552).
-
- Fixed in commit:6d5261bd (SVN r9552).
-
- Chris, could you explain a bit more in detail how you do steps 2) and 3). I'm not sure I understand what you do.
2008-10-26
-
10:37 AM Bug report #1378 (Closed): python plugin not loaded
- There're currently a lot of API changes going on to cleanup the API for the release of version 1.0. See http://wiki.q...
-
- There're currently a lot of API changes going on to cleanup the API for the release of version 1.0. See http://wiki.q...
-
09:57 AM Bug report #1378 (Closed): python plugin not loaded
- Qgis 1.0 dev (priview) is load following window appears.
Plugin konnte nicht geladen werdenspatial_operations konnte...
2008-10-25
-
- Is the ambiguity in the English or in the Russian translation? As a native english speaker I dont find the terms to b...
-
- Fixed in commit:49eeb8a1 (SVN r9546)
-
- Fixed in commit:49eeb8a1 (SVN r9546)
2008-10-24
-
03:16 PM Bug report #1377 (Closed): Attribute table doesn't show any rows after shapefile update
- When I add a feature to a shapefile dataset. I can't see the new feature in the attribute table.
If I close the attri... -
07:49 AM Bug report #1247: Failed assertion in ggsclipper.h
- Sorry, it was some time ago now, so I have completely re-built the
offending project -
- fixed in
-
- fixed in
-
04:48 AM Feature request #1376 (Closed): Command line history for Python console
- For those of us who use the Python console frequently, a major improvement would be the implementation of some form o...
2008-10-23
-
12:45 PM Feature request #1375 (Closed): Confusing icon during drag-and-drop within map legend
- During drag-and-drop operation within map legend, cursor's icon is confusing.
It suggest, that any change of layers o... -
- In addition to the http proxy support, it would be nice to be able to specify other proxy types: ex. socks 4 or 5
2008-10-22
-
12:40 AM Bug report #1344: Zooming to a very small area causes a long freeze
- No rasters were involved at the time I was zooming in and out (I don't recall if any rasters were loaded earlier in t...
-
- Are there any rasters loaded?
-
11:44 PM Bug report #1373 (Closed): Derived area values from identify tool differ from calculated PostGIS ...
- Already reported with #1219
-
- Already reported with #1219
-
08:27 PM Bug report #1373: Derived area values from identify tool differ from calculated PostGIS area
- Replying to "hdus":/issues/show/1373:
> When I identify a polygon with the identify tool, the derived area differs fr... -
- Replying to [comment:1 homann]:
> Can you provide a sample multi-point vector, please?
The shapefile in the .zip arch... -
- Can you provide a sample multi-point vector, please?
-
- It crashes for me in Metis on XP (), but not in trunk (commit:73c0a754 (SVN r9491)). The bug seems fixed! :-)
-
- It crashes for me in Metis on XP (), but not in trunk (commit:73c0a754 (SVN r9491)). The bug seems fixed! :-)
-
- Time to close this bug. Submitter can re-open if he/she feels it still is valid.
-
- Time to close this bug. Submitter can re-open if he/she feels it still is valid.
-
- Time to close this bug.
-
- Time to close this bug.
-
- Do you have the possibility to submit the project and/or offending files?
-
- Do you have rasters loaded in your canvas when you do this selection. For me, that makes the computer freeze *for a w...
-
- I cannot reproduce this on Win XP with 0.9.2. If submitter feels the problem persists, please re-open this bug.
-
- I cannot reproduce this on Win XP with 0.9.2. If submitter feels the problem persists, please re-open this bug.
2008-10-21
-
- When I identify a polygon with the identify tool, the derived area differs from the calculated area with postgis area...
-
- Decreaseing the point size has the same effect.
I've set a minimum size of 4 in .
-
- Decreaseing the point size has the same effect.
I've set a minimum size of 4 in .
-
- I tried with SVN commit:5fa4a710 (SVN r9509) and I can see immediate update in legend and on canvas.
-
- I tried with SVN commit:5fa4a710 (SVN r9509) and I can see immediate update in legend and on canvas.
-
- I can't reproduce this in latest SVN source. I opened your test project which consisted of two layers from the same s...
-
- I can't reproduce this in latest SVN source. I opened your test project which consisted of two layers from the same s...
-
-
-
-
- Didn't know you could do that in Qgis. Thanks for the tip! :-)
Added in commit:9ef779f3 (SVN r9510). -
-
- Fixed in commit:db574063 (SVN r9151).
-
- It is the default Qt sorting, no idea how to change it.
-
07:50 AM Bug report #1372: Crash when using postgis layers with symbology "continous colors"
- When using the Ubuntu-Version everything works fine!
-
- POSTGis-Layer: View in Postgis-Database v_mdat_gem_k_efh
When displaying the data everything works fine.
"Save Proj... -
04:05 AM Bug report #1371 (Closed): if I open a project file and the grass mapset is no longer there, qgis...
- I rearranged my grassdata so the mapset was in a different location. When I tried opening the project file, it termi...
2008-10-20
-
- This sounds like a duplicate of #418.
-
- This sounds like a duplicate of #418.
-
02:34 AM Bug report #1370 (Closed): projection not recognized
- While opening a shp with the attached .prjr1, the projection is not recognized, and defaults to the longlat (as defin...
-
- I'm sorry, but the warning is still a GUI change. That towgs differs is just a special case of the fact that the proj...
-
03:28 AM Bug report #1176: Transverse mercator south orientated projections not supported
- I'm not sure what the right approach to fixing this in qgis is, but using the command-line tools cs2cs and proj, I ge...
2008-10-19
-
- duplicate of #808
-
- duplicate of #808
-
12:42 AM Bug report #1369 (Closed): Cannot close mapset
- Using QGIS 0.11 on Windows XP SP2.
GRASS "Close Mapset" always returns "Cannot close mapset. Cannot remove mapset l... -
- Using QGIS 0.11 on Windows XP. I have started working with GRASS, and have been importing vector and raster datasets...
-
07:33 PM Bug report #1367 (Closed): Launch of 1.0 Preview 1 fails on Vista x64 SP1
- Launch of 1.0 Preview 1 fails on Vista x64 SP1.
Something to do with the x64 program files being located in 'Program... -
05:54 PM Bug report #1339: Can't set projection to WGS84 UTM Zone 15N
- On Linux (Ubuntu) and Windows:
I loaded a layer with custom projection (South America LCC: +proj=lcc +lat_1=-5 +lat_2... -
- The order of sorting for GRASS tables when clicking on the column header is incorrect (see attached png)
-
- When a module is open, there is apparently no way to reload the newly added layers (raster and vector), so one has to...
-
- At the end of a vector analysis, when adding the output to the map with the (very convenient) button at the bottom, i...
-
- When loading the reclassification rules (r.reclass), the dialog allows only txt and csv files (wrong: they may be any...
-
- The dialog for GRASS file selection forgets about the last used directory. This is rather annoying
-
- In /usr/share/qgis/grass/modules/r.out.gdal.gtiff.qgm
<option key="type" answer="Float64" />
should be
<option key=... -
- The Identify feature button is greyed out until at least one vector is loaded, thus is useless when working with rast...
-
- When saving image files from map composer, the file type extension is not written
-
- Apparently it is not possible to select a colour for the labels
-
- In addition, the file is saved without extension (.map)
-
- Pyramids cause tiff files to become reddish, and the lower right quadrant is not completed
-
- The option "Create spatial index" in Layer properties does not work for [[MapInfo]] layers, even if among the metadat...
-
08:53 AM Bug report #418: QGIS fails to read undefined projection from user datum in shape.prj file
- Replying to [comment:14 homann]:
> Talked to timlinux, and the idea with have is if the specfied projection does not ... -
- The current behaviour of map units choiche (always degrees) is rather annoying for the (many, I suppose) users that w...
2008-10-18
-
- Actually, you can only change the propoerties that are identical to begin with. This is probably a bug, not a feture....
-
- I still dont understand what you really want. Could you please email the qgis-user list and we take the discussion th...
-
03:49 PM Feature request #960: Area scale field: make standardized symbol dimension and legend
- I was talking about that...
Look at the attached images:
Property dialog: http://www.geospatial.it/allegri/property.... -
- Have you tried using Graduated Symbol?
-
- Sorry, there were problem pasting the text
*Ok, I leave this ticket, but I haven't seen any GIS needing that. I usua... -
- Ok, I leave this ticket but your idea is, but I haven't seen any GIS needing that! I select the classes, and max-min ...
-
- Set the fields to values that can be used for scaling directly.
-
- Set the fields to values that can be used for scaling directly.
-
- Ok, you can advocate my suggestion, but the problem remains: these days I'm working on a layer, and I need to make gr...
-
- Ok, you can advocate my suggestion, but the problem remains: these days I'm working on a layer, and I need to make gr...
-
- I'm not so sure this is a good idea. The question then arise, what kind of expressions should we allow? Scale based o...
-
- I'm not so sure this is a good idea. The question then arise, what kind of expressions should we allow? Scale based o...
-
08:47 PM Feature request #1022: delimited text layer plugin: robustness
- Replying to [comment:2 homann]:
> Is the newline just '\
', not '\
\
' ?
Yes, the [[MacOS]]9 newline is just '\
'.
... -
- Is the newline just '\
', not '\
\
' ?
Trying to think of the downsiode with this approach... -
- Talked to timlinux, and the idea with have is if the specfied projection does not have an exact match (including +tow...
-
- Is this error still present? Another towgs bug has been fixed, I believe.
-
- The UI is confusing, no doubt about it.
When OTF proj is off, we don't use the CRS at all. All layer poits are unitl... -
11:57 AM Feature request #1354 (Closed): Ambiguous GUI label "Capture" for map editing tools
- The GUI labels for map editing tools "Capture Point", "Capture Polygon", etc. are considered ambiguous and unclear by...
-
- Fixed in .
-
- Fixed in .
-
- The crash and deleting wrong one points was fixed with #1255 ().
Using only [[LeftButton]] was added in commit:53a9a... -
- The crash and deleting wrong one points was fixed with #1255 ().
Using only [[LeftButton]] was added in commit:53a9a... -
11:09 AM Bug report #1353 (Closed): SDTS Upload, ver. 011.0
- I opened a freshly downloaded file of the Bushkill quadrangle DLG in SDTS format. Nothing shows on the screen, even ...
-
- I think we can close this bug, multipoints are now drawn exactly like pointts, but not in dead center. Adjusting the ...
-
- I think we can close this bug, multipoints are now drawn exactly like pointts, but not in dead center. Adjusting the ...
-
- It's coming back to me. The points are bitmaps which are referenced with the upper left corner. There is some fudging...
-
- I did look into similar error two(?) years ago, and was then uable to draw the images correctly. Something wrong with...
-
- What is the status of this bug? Do we need to fix the CRS recognition logic yet?
-
- We nned more info, can you supply the layer and or projetcion settings?
2008-10-17
-
03:23 PM Bug report #1176: Transverse mercator south orientated projections not supported
- I would like to suggest that we add axis orientation control to PROJ.4 init strings and handle them appropriately in ...
-
- Well, in that case it's not much we can do? We rely on proj4 and GDAL/OGR to perform the string parsing and projectio...
-
02:26 AM Bug report #1176: Transverse mercator south orientated projections not supported
- See also "proj4 ticket #3921":http://trac.osgeo.org/proj/ticket/18 and "PostGIS ticket 61":http://code.google.com/p/p...
-
- This has been fixed by using a tolerance depending on layer crs units.
-
- This has been fixed by using a tolerance depending on layer crs units.
-
- Yes, those are dangling lines and it would be good to have a C-API function for it.
In the meantime, commit:73c0a754 ... -
- Yes, those are dangling lines and it would be good to have a C-API function for it.
In the meantime, commit:73c0a754 ...
2008-10-16
-
- Closing as works for me - tested here on commit:014fe9a9 (SVN r9485) and works fine on ubuntu 8.10.
-
- Closing as works for me - tested here on commit:014fe9a9 (SVN r9485) and works fine on ubuntu 8.10.
-
- Fixed with commit:382d52b4 (SVN r9480). Note there still seems to be an issue with actual quantile computation - wil...
-
- Fixed with commit:382d52b4 (SVN r9480). Note there still seems to be an issue with actual quantile computation - wil...
-
- You are right, the '-m' parameter does not work. It does however work in the "test" box in the custom CRS dialog. The...
-
- I'm closing this one, as there was a similar ticket open. Let's concentrate on ticket #1176.
-
- I'm closing this one, as there was a similar ticket open. Let's concentrate on ticket #1176.
-
- Replying to [comment:2 gfleming]:
sorry, correction - the proj4 definitions for the SA Cape datum projections mentio... -
- Replying to [comment:1 homann]:
> Do you have the proj4 definitions handy? If so, please attach them.
Attached are t... -
- Do you have the proj4 definitions handy? If so, please attach them.
2008-10-15
-
- I think this is reated to a bug in Qt, as also other Qt apps on the same system do not work through the same proxy. I...
2008-10-14
-
11:56 PM Bug report #1345 (Closed): Updated Slovak translation
- Applied in commit:00cf75b5 (SVN r9478)
-
- Applied in commit:00cf75b5 (SVN r9478)
-
- Won't be happening for version 1.0
-
- QGIS (0.11 Metis) does not list these projections which are vital and standard in South Africa:
South African Coordi... -
01:16 PM Bug report #1351 (Closed): WMS and DB connections should have a per connection proxy enable/disab...
- I don't know if this is really a bug or an enhancement request. In my situation it is a bug - a real problem.
I have... -
- With the current trunk, WMS connections don't work through the Proxy. This was confirmed by at least two other person...
-
10:38 AM Bug report #1349 (Closed): Change Outline Style for multiple classes (Vector Properties)
- In the vector properties dialog, a nice feature exists where you can change the fill style for multiple classes at on...
2008-10-13
-
- Fixed in commit:16caebc2 (SVN r9477).
-
- Fixed in commit:16caebc2 (SVN r9477).
-
- [from http://lists.osgeo.org/pipermail/qgis-user/2008-October/003515.html]
> Hi,
> When loading raster layers from th... -
01:36 AM Feature request #1125: Add ability to undo last edits
- I want to reinforce the previous comments. I really like QGis, but cannot recommend it to others until an undo functi...
-
- Changed to milestone 1.1 as 1.0 is in feature freeze.
-
- wow - this was one of the fastest bug fixes I ever experienced - thank you very much!
-
- fixed in commit:17c044fc (SVN r9476)
-
- fixed in commit:17c044fc (SVN r9476)
-
- I just compiled the latest QGIS trunk version and ran into the problem that the WMS plugin now generates invalid WMS ...
-
- Buffer labels set in the map canvas are not being produced for Composer maps saved as image file (png format, at leas...
-
-
- Added insert string to postprocess_srs.sql and checked in a new srs.db.
-
03:33 AM Bug report #1104: Mapfile export PostGIS layers
- Replying to [comment:2 pcav]:
> Is this still valid after 5 months?
I tried the 0.10.0 version and there are no quote... -
- Is this still valid after 5 months?
2008-10-12
-
- I am very sorry that the title turned out to be wrong on this bug report. I was in the middle of exploring the bug w...
-
05:16 AM Feature request #728 (Feedback): Added missing "S-JTSK/Krovak (Greenwich)" projection
- SRS is missing again since srs.db update in commit:9eca6b7c (SVN r8721) (so it is impossible to load WMS, WFS layers ...
-
- SRS is missing again since srs.db update in commit:9eca6b7c (SVN r8721) (so it is impossible to load WMS, WFS layers ...
-
- Updated Slovak translation for QGIS 1.0.0
2008-10-11
-
09:51 AM Bug report #768: A few lib paths wrong in OSX
- ... And the cmake_install.cmake's are generated from cmakelists, of course...
for the python modules, which are miss... -
- I tried to make sense of the cmake setup. The progress output is no help, even with verbose.
It looks like src/help...
2008-10-10
-
- Tom / William can you offer a permanent fix for this or can we otherwise close this somehow.
Regards
Tim -
- Celebrations! This has been fixed in commit:8094f1d4 (SVN r9472) at the QGIS hackfest at Buchu Bushcamp.
-
- Celebrations! This has been fixed in commit:8094f1d4 (SVN r9472) at the QGIS hackfest at Buchu Bushcamp.
-
- I tested the procedure and as or commit:8094f1d4 (SVN r9472) works fine for me. Closing this ticket.
Regards
Tim -
- I tested the procedure and as or commit:8094f1d4 (SVN r9472) works fine for me. Closing this ticket.
Regards
Tim -
- Closed - works for me under Qt 4.3 & Qt4.4. Please reopen if problem persists under a current version of Qt4. Suggest...
-
- Closed - works for me under Qt 4.3 & Qt4.4. Please reopen if problem persists under a current version of Qt4. Suggest...
-
- We will be integrating the PAL label placement library for probably QGIS 1.1. They are finishing some changes and for...
-
- Closing this bug as 'works for me'. Tested on ubuntu 8.04 using standard Qt4.4 packages. Marco also tested using Qt4....
-
- Closing this bug as 'works for me'. Tested on ubuntu 8.04 using standard Qt4.4 packages. Marco also tested using Qt4....
-
- Closed as old - this dialog has since been rearranged for 1.0. Please reopen if problem persists with trunk.
-
- Closed as old - this dialog has since been rearranged for 1.0. Please reopen if problem persists with trunk.
-
- Closed as stale following offlist discussions with Tara.
-
- Closed as stale following offlist discussions with Tara.
-
- Tested in SVN trunk commit:f5a0a4ca (SVN r9471) and graduations run from -0.001 to +4.001. Works for me, I'm closing ...
-
- Tested in SVN trunk commit:f5a0a4ca (SVN r9471) and graduations run from -0.001 to +4.001. Works for me, I'm closing ...
-
- I have a [[PostGIS]] layer (municipality polygons). I experience a several minutes long freeze (with high CPU) when ...
2008-10-09
-
- duplicate of #1343
-
- duplicate of #1343
-
04:37 PM Bug report #1342 (Closed): dxf2shp plugin does not distinguish between polygon and polyline corre...
- dxf2shp plugin does not distinguish between polygon and polyline correctly.
In the attached example, polyline and pol... -
- Sorry, test file to large to upload.
-
- dxf2shp plugin does not distinguish between polygon and polyline correctly.
In the attached example, polyline and pol... -
06:27 AM Bug report #1341 (Closed): WMS GetMap Handling not conform to standard
- Sorry - I don't see that. the ticket was really old, but it was solved only 2 days ago. I think different urls for th...
-
- Sorry - I don't see that. the ticket was really old, but it was solved only 2 days ago. I think different urls for th...
-
- isn't this a duplicate of #670, which was just fixed in ?
-
- QGIS uses the online resource for the [[GetCapabilities]] operation to do the [[GetMap]] Requests. There are differen...
2008-10-08
-
- I am providing a patch that fixes this problem and also #1244 (spaces in file names).
This uses QFileInfo::completeB... -
03:15 PM Bug report #670 (Closed): terraserver WMS getcapabilities not understood
- fixed in by Vita Cizek - thanks for contribution!
-
- fixed in by Vita Cizek - thanks for contribution!
-
08:54 AM Feature request #952: Support PostgreSQL uuid type
- A suggested workaround for this is to:
1. drop the primary key constraint
1. add a unique key constraint on the uui... -
03:27 AM Feature request #1340 (Closed): hardcoded arrow marker
- I wonder if you could add the attached patch. With this hardcoded arrow, it is possible to add 2 information items to...
2008-10-07
-
- Appears to be fixed by commit:cae67430 (SVN r9445).
-
- Appears to be fixed by commit:cae67430 (SVN r9445).
-
- Hello there,
I'm trying to write a python plugin which needs to determine georeferencing info for layers.
I set a... -
- Test dataset works fine for me on ubuntu heron, as of commit:a185c783 (SVN r9453) . Can someone test on win xp?
-
- fixed in commit:438dd760 (SVN r9451)
-
- fixed in commit:438dd760 (SVN r9451)
-
03:02 AM Bug report #1338 (Closed): nextval values of a postgis layer are not saved
- I'm trying to edit a postgis table (feature type point) like the following:...
-
- We can no longer replicate this in trunk. Closing bug.
-
- We can no longer replicate this in trunk. Closing bug.
-
- Fixed with recent changes to SVN trunk.
-
- Fixed with recent changes to SVN trunk.
2008-10-06
-
- This issue is fixed at QGIS code sprint Warmwaterberg just near Ronnies Sexshop ;-) coords 20.900,-33.765 by Tim, Mar...
-
- This issue is fixed at QGIS code sprint Warmwaterberg just near Ronnies Sexshop ;-) coords 20.900,-33.765 by Tim, Mar...
-
03:43 AM Feature request #1337 (Open): User-defined zoom limit
- When using the "zoom map to selected rows" tool in the "Open attribute table" window, the zoom factor is set to 2:1; ...
2008-10-05
-
- also something that people requested at the INTERGEO qgis booth. Attached a patch that also adds an 'Auto' setting f...
2008-10-03
-
07:06 AM Bug report #1336 (Closed): loading gpx files
- Greets:
1. Load wms blue marble from lizardtech wms
2. Load local gpx file as a new layer from menu not pluggin
...
2008-10-02
-
-
- Actually, when you use a label field in a vector layer, the labels are shown according to the scale threshold specifi...
-
- Implemented in new plugin installer from Borys Jurgiel.
-
- Implemented in new plugin installer from Borys Jurgiel.
-
04:24 PM Bug report #670: terraserver WMS getcapabilities not understood
- Replying to [comment:8 wonder]:
> Apparently the URL has changed in meanwhile, now at: http://terraserver-usa.com/ogc... -
- Apparently the URL has changed in meanwhile, now at: http://terraserver-usa.com/ogccapabilities.ashx
But the problem... -
07:09 AM Feature request #47: raster legend in map composer
- Please implement raster legend display (so that you can define custom breaks of cell values and view them in the colo...
2008-10-01
-
- Hello,
in the information popup of polygons or lines you see the result of aerea measurement or line length. Verry ...
2008-09-30
-
03:39 AM Bug report #1333 (Closed): QGIS measure tools
- I´m using QGIS witch i find very intesting. When I tried to use the Measure Area and Measure Line tools i just recive...
2008-09-29
-
- From head, when doing _make install_, I get this error:...
-
- Sorry,
i didn@t get it first time.
Ticket #1122 is actually the same.
Thanks
Gerhard -
- I'm not telling you to duplicate anything. I'm just saying that this ticket addresses the same enhancement ticket #1...
-
- I'm not telling you to duplicate anything. I'm just saying that this ticket addresses the same enhancement ticket #1...
-
- Hello jef,
to duplicate brings not the wished result.
When you mark p.e. three polygons in layer and duplicate (copy... -
- Hello jef,
to duplicate brings not the wished result.
When you mark p.e. three polygons in layer and duplicate (copy... -
- duplicate of #1122
-
- duplicate of #1122
-
- Hello,
verry often, I have to union marked objects in a layer. Unfortunately, there is no funtion in qgis. (the spli... -
- see also #1331
-
09:18 AM Bug report #1002: SIP-related Compile errors
- I'm also seeing this error when trying to build on Fedora 8. My only workaround right now is to try to disable the p...
Also available in: Atom