Activity
From 2014-01-21 to 2014-02-19
2014-02-19
-
11:25 PM Bug report #9606 (Closed): QWC fails silently if project doesn't have "service capabilities" checked
- Moved from #9605 as a server not a client issue.
If the project doesn't have "service capabilities" checked, QGIS se... -
02:17 PM Bug report #9060: Area is wrong in QGIS master (again)
- Hi Rhenriques, this pull (https://github.com/qgis/QGIS/pull/1071) (not merged) attempts to correct that behavior that...
-
01:59 PM Bug report #9060: Area is wrong in QGIS master (again)
- I'm paying attention to every single NB about this issue. Changes are not committed yet in the NB: f06457b. Changing ...
-
09:06 AM Bug report #9060: Area is wrong in QGIS master (again)
- Martin Dobias wrote:
> No, it fixes only wrong value in identify tool. I am not aware of any issue in field calculato... -
08:57 AM Bug report #9060 (Reopened): Area is wrong in QGIS master (again)
-
- Hi Martin, there is an issue commented in #9060-14 that I think fixed in https://github.com/qgis/QGIS/pull/1071
Ch... -
- No, it fixes only wrong value in identify tool. I am not aware of any issue in field calculator.
-
- Martin Dobias wrote:
> In case of any further issues please open a new bug as all the comments in this issue make it ... -
- In case of any further issues please open a new bug as all the comments in this issue make it hard to follow.
-
- Current state of measuring:
- ellipsoid "none" - consistently returning 2.520 km^2 (with project's CRS being EPSG:207... -
- Fixed in changeset commit:"7ea3390950be8232a9505438c428f5f0933ab1fb".
-
> Is this the problem or are there more cases to fix?
Hi Martin, I resume here what we discussed in private. Anyway...-
-
01:16 PM Bug report #9575: Georeferencer: Polynomial 2 transformation with 6 GCP is unable to process
- Michel Proulx wrote:
> Problem solved.+ West of the Meridian line longitidude coordinates are negative+.
>
> I think... -
> Other problem occurs, Polynomial 2 transformation with 6 GCP is unable to process.
so this is the real issue, right?-
12:31 PM Bug report #9573: hostnames with non-ascii characters cause python console to fail.
- Likely related: http://bugs.python.org/issue9377
-
- What is your system's hostname?
-
12:25 PM Bug report #9604 (Closed): Attribute table: the icons for "Unselect all" and "Delete selected fea...
- Every time I open the attributes table I end up mixing these two buttons, because the icons are tool similar. It woul...
-
12:05 PM Bug report #9601: Point displacement: data defined size and angle does not work
- Thank you for acknowledging the issue. I hope that it can be fixed in the next version. Actually, I would also hope t...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- I can confirm the issue also for the size. It seems that for both the rotation and size the value used is the one of ...
-
- Point symbols can be angled through Data Defined Properties, but this function does not work with Point Displacement....
-
- I cannot replicate anymore on the latest master, something has changed, for the better. Please reopen if I'm wrong.
-
- I cannot replicate anymore on the latest master, something has changed, for the better. Please reopen if I'm wrong.
-
- Confirmed on the latest version of processing and Linux.
-
- Confirmed on the latest version of processing and Linux.
-
- Confirmed on the latest version of processing and Linux.
-
08:19 AM Bug report #9603 (Closed): Error message with processing tool "Extract by location"
- Hi,
In the toolbox when using the tool "Extract by location" (QGIS Geoalgorithms > Vector selection tools) I have no ... -
- Markus Neteler - wrote:
> Giovanni Manghi wrote:
> > see "OSGeo4W !#388":http://trac.osgeo.org/osgeo4w/ticket/388
>
... -
- The first question is not really clear. Please rephrase it (the title as well) and I will reopen this ticket.
About ... -
- The first question is not really clear. Please rephrase it (the title as well) and I will reopen this ticket.
About ... -
- The ID in the list is different bacause probably it is an internal id for the feature, that is different in shapes an...
-
- The ID in the list is different bacause probably it is an internal id for the feature, that is different in shapes an...
-
- The ID in the list is different bacause probably it is an internal id for the feature, that is different in shapes an...
-
- Lowering the priority - should not block the release.
-
- Fixed in commit:63d84ec by Hugo
-
- Fixed in commit:63d84ec by Hugo
-
07:36 AM Bug report #9599: QGIS_PLUGINPATH option raise an error
- submitted
https://github.com/qgis/QGIS/pull/1195 -
02:58 AM Bug report #9599: QGIS_PLUGINPATH option raise an error
- Thanks !!!!
-
- Ok, got it.
Each '\\' is doubled for python path inclusion, but we check if it exists AFTER doubling the '\\'.
On Win... -
- Yep, it works well in 2.0.1
Régis -
- Confirmed here.
btw, I think the correct message is "The extra plugin path '%1' does not exist".
It only raises when ... -
- Hi, I'm doing deploiement test here and found a blocker.
A error message is raised when using QGIS_PLUGINPATH variab... -
- Martin Dobias wrote:
> Actually, I have replicated the problem by chance while playing with #9060 on my self-compiled... -
08:03 AM Bug report #9600 (Closed): When using the datum transformation dialog the labels of reprojected l...
- Fixed in changeset commit:"34f79cf1fff11bd3ac23548d0929a7e90e6d142d".
-
04:19 AM Bug report #9600: When using the datum transformation dialog the labels of reprojected layers are...
- This is only noticeable with point layers, because with other geometries it is almost impossible to "fix" the label a...
-
- See
http://goo.gl/ccHegM
and/or attached screencast -
04:52 AM Bug report #9602 (Closed): preview and atlas scales are not synchronized
- If your atlas has a fixed scale, when you change the scale in the preview it does not change the atlas, which is conf...
-
- Patrick Dunford wrote:
> 141 is the latest master.
ok, then it is solved for you or not? cheers! -
02:48 AM Bug report #9526: File based layer edits and posts taking extremely long time
- 141 is the latest master.
-
03:22 AM Feature request #9592: Oracle should only look in metadata table for metadata
- Ok looking at the code it seems that it's done different to the MS SQL provider. From the look of it it's still done...
-
03:17 AM Feature request #9592: Oracle should only look in metadata table for metadata
- I'm not sure we're talking about the same thing (or maybe I'm mis-understanding how the internals work). The way it s...
-
- It's all done in a background thread though so it shouldn't block the UI, so you can have your cake an eat it too. L...
-
- > Yeah see but I don't think the issue is the checking the issue is that you can't load the layer until the check is ...
-
- Yes it does allow more then one geometry type, however if anyone does that they are dead to me :)
Taking the first s... -
- A further thought - does MS SQL allow multiple geometry types in the same column? I.e. mixing polygon, points etc, li...
-
- I have had this discussion with others as well. I guess I'm the kind of person that likes seeing the geometry type i...
-
- > The other option is the to have a geometry_columns query/table, which we have in the MS SQL and PostGIS providers. ...
-
- I just recently fixed (patched) this issue with the MS SQL driver. I just used the TOP 1 because just checking the f...
-
- Jukka Rahkonen wrote:
> I would prefer using MDSYS.ALL_SDO_GEOM_METADATA. QGIS user is not necessarily the same who c... -
02:26 AM Bug report #9498: legend item vertical spacing (once again) broken for layers set to hidden
- Radim, I've just compiled qgis with your commit in, and legend is acting like a charm, excellent. I think we can call...
-
- Radim, I've just compiled qgis with your commit in, and legend is acting like a charm, excellent. I think we can call...
-
02:17 AM Bug report #9498: legend item vertical spacing (once again) broken for layers set to hidden
- I have done better fix (fixing the real problem) in commit:7822abd.
Please test.
2014-02-18
-
12:58 AM Bug report #8991: nviz does not work (not found) in qgis 64bit osgeo4w
- Giovanni Manghi wrote:
> see "OSGeo4W !#388":http://trac.osgeo.org/osgeo4w/ticket/388
For the record, it has been cl... -
- Actually, I have replicated the problem by chance while playing with #9060 on my self-compiled build (not using debia...
-
- !! Yay !!
Martin, out of purely geeky curiosity, why was this not showing on self-compiled builds and showing on th... -
- Fixed in changeset commit:"5d4cf3086abe6bb205423771093cc5eebac6d5b8".
-
-
- I am getting quite confused by the discussion as there have been various issues mentioned.
Can you please clearly de... -
12:21 PM Bug report #9060: Area is wrong in QGIS master (again)
- IMHO, the correct solution would be that _both_ the measurement tools and the field calculation functions should obey...
-
- I am pretty sure this got fixed by commit:5d4cf3086 (same problem with randomly overwritten extent)
-
- I am pretty sure this got fixed by commit:5d4cf3086 (same problem with randomly overwritten extent)
-
- Richard, there's a serious ongoing issue with simplification that only manifests through debian-nightly packages (but...
-
02:39 PM Bug report #9581: linestrings not transforming on the fly
- Gavin, I cannot reproduce this either (Debian self compiled QGIS of yesterday)
Loading your (latlon degrees) shapefi... -
12:15 PM Bug report #9581: linestrings not transforming on the fly
- Try the attached shapefile. If I load it with simplification on, it never draws when projected but if I load it with ...
-
- Gavin Fleming wrote:
> appears to be duplicate of #9360
as it happens for #9360 I'm really not able to replicate (us... -
- I noticed a few problems while adding embed layers or groups:
* if you add a layer which ID already exist in the proj... -
09:52 PM Feature request #9592: Oracle should only look in metadata table for metadata
- I would prefer using MDSYS.ALL_SDO_GEOM_METADATA. QGIS user is not necessarily the same who created the table.
About... -
- Jürgen Fischer wrote:
> > because QGIS isn't trusting the USER_SDO_GEOM_METADATA.
>
> no, just because USER_SDO_GEOM... -
04:50 AM Feature request #9592: Oracle should only look in metadata table for metadata
- > because QGIS isn't trusting the USER_SDO_GEOM_METADATA.
no, just because USER_SDO_GEOM_METADATA doesn't carry info... -
- When the "Only look in meta data table" checkbox is selected, QGIS should *only* use the MDSYS.USER_SDO_GEOM_METADATA...
-
01:18 PM Bug report #9597 (Closed): 2.1.0 revision c9a88c1 fails to export spatial information from polyli...
- Including:
GEOMETRY=AS_WKT
SEPARATOR=SEMICOLON
LINEFORMAT=CRLF
Into the Layer options in the CSV "save..as" dialog ... -
- Patrick Dunford wrote:
> At the moment I'm running 141 noplugins. Might try it tonight with plugins enabled.
the imp... -
- At the moment I'm running 141 noplugins. Might try it tonight with plugins enabled.
-
- Patrick Dunford wrote:
> Testing with the --noplugins option but haven't done enough on it yet to see if fixed. Haven... -
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > Matthias Kuhn wrote:
> > > Is this still an issue?
> > >
> > > L... -
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > Matthias Kuhn wrote:
> > > Is this still an issue?
> > >
> > > L... -
- Problem solved. West of the Meridian line longitidude coordinates are negative.
I think it is not clearly mentionned... -
09:54 AM Bug report #5848: Different icons for QGIS and QGIS Browser
- Icon based on magnifier icon of Larry.
-
08:53 AM Bug report #9524: Special character & in plugin authors prevent downloading
- Here you have a fast workaround. The long-term solution should be implemented on the repository side, see: #9595
-
- Fixed in changeset commit:"88e8f9d6b6f05cbda44eea2c4d925170e82342eb".
-
- I am not sure the fix is OK. Basically each row in legend is a nucleon, group of nucleons is atom. Layer item is a nu...
-
- Fixed in changeset commit:"5cd53dd28ef44db7802d6d7bfa38227792483686".
-
08:29 AM Bug report #9434: DB Manager versioning: language "SQL" does not exist
- Confirmed, thanks.
-
08:23 AM Bug report #9434: DB Manager versioning: language "SQL" does not exist
- I found this discussion, that might help solving the problem.
http://www.gossamer-threads.com/lists/davical/general/... -
- Fixed in changeset commit:"580f3dc80d4bfba54438c2b6236a2d1e76914034".
-
06:54 AM Bug report #9593 (Closed): Commit error not displayed in message bar
- When a commit error is raised by the DBMS, the error is not correctly displayed in the message bar: %s (should be the...
-
07:19 AM Bug report #9395 (Closed): WFS layers time out, even though the timeout is not reached
- I've not been able to fully determine, that is a QGIS issue and not a Geoserver issue. For that reason, I'll close th...
-
- I'm currently having a look at this. Assigning to myself to avoid doubled up work.
-
- Hi Jürgen
As you seem to know the networking code of QGIS very well, could I get you to take a look at this? It's my... -
06:54 AM Bug report #9594 (Closed): Save output shapefile dialogue is slow to load filenames
- When browsing to save the output shapefile of a tool, the browse dialogue box consistently takes several tens of seco...
-
-
- Not reproducable here, but commit:7f5aac30 might still fix it.
-
- Not reproducable here, but commit:7f5aac30 might still fix it.
-
- Fixed in changeset commit:"7f5aac30b1ab05cb901f2ea349a0badbef3d39ba".
-
- Hi,
Primary key choice list in postgis connection dialog does show much more field than real table or view has.
Good... -
- Currently when adding an Oracle layer QGIS performs a MBR check against the layer (SDO_TUNE.EXTENTS_OF). This hangs Q...
2014-02-17
-
12:48 AM Bug report #8979: Crashing WFS in 32bit Windows Install
- I can confirm that in the developer version QGIS code revision: 8f7c879 the issue is no longer present. Thanks, much ...
-
- * Add a PostGIS geographic layer (with SRID defined)
* Add a PostGIS table layer
-> This window appear: see attached... -
- include steps to reproduce please.
-
- When adding a geometry less table, the prompt to choose SRS transformation is opened.
-
- This fixes the worst part of the problem, i.e. that the expression is not saved when edited in the config dialog. I'l...
-
- This fixes the worst part of the problem, i.e. that the expression is not saved when edited in the config dialog. I'l...
-
- Fixed in changeset commit:"5e21c55d2b6358da0a8b61beb490ea0dd5f26a0c".
-
09:32 PM Bug report #5025 (Closed): issue in snapping of point
- The problem went away, this bug can be closed.
-
- I made some more investigation: the number of nodes created is not linked to the type of layer, but to the number of ...
-
07:00 PM Feature request #9587 (Closed): honor path from all sides - program and add on
- I think it is important to use the path based on 'favourites' (if set) as that is an active choise of mine and the co...
-
- I just tried the test cases in the GDAL tickets, they are correctly represented with QGis Master.
-
02:41 PM Bug report #5848: Different icons for QGIS and QGIS Browser
- I agree with Anita, the icon needs to be more discernible from desktop app icon, especially when at 24 x 24px. Howeve...
-
09:39 AM Bug report #5848: Different icons for QGIS and QGIS Browser
- I don't think v1 is the best option. In my opinion, the difference between the desktop and browser icon should be mor...
-
- Andreas, my suggestion:
If we use the icon v1 prototype we need to pick a color for the folders that is neutral for ... -
05:12 AM Bug report #5848: Different icons for QGIS and QGIS Browser
- My vote is for the version qgis_browser_icon_prototype_v1.svg - but with a change that the folders are in blue instea...
-
- My vote is for qgis_browser_icon_prototype_v6.svg
But anyone is ok for me. -
- Paolo Cavallini wrote:
> IMHO this should changed, as it is quite confusing for users.
and which one? two here, a ... -
- See:
https://drive.google.com/folderview?id=0B98hU-Ebn7VvX2lGTFRvWkdiX28&usp=sharing
IMHO this should changed, as i... -
- See:
https://drive.google.com/folderview?id=0B98hU-Ebn7VvX2lGTFRvWkdiX28&usp=sharing
IMHO this should changed, as i... -
- Hi, I have released a new pull request that attempts to correct this issue or as least show debug information:
https:... -
- Hi, sorry, these days I'm finding it impossible to look this issue for family reasons.
I will try to build QGIS as d... -
- affects me too (I added #9581 which is probably a duplicate of this). I did an update today so either the patch hasn'...
-
- Fixed in changeset commit:"b9b9bc31b3ba63b06def835dbb01772134661856".
-
06:11 AM Bug report #9580 (Closed): wrong geometry error detection with QGIS method
- Hi,
attached you find a small project with a polygon shape file. Using the "check geometry validity" tool from the f... -
- Fixed in changeset commit:"b9b9bc31b3ba63b06def835dbb01772134661856".
-
- Fixed in changeset commit:"b9b9bc31b3ba63b06def835dbb01772134661856".
-
- Fixed in changeset commit:"7becd761af05d3946e3c94017cffacf5ed72be4e".
-
06:07 AM Feature request #8709: Easier import of OSM data: bounding box
- The source of this bus is correctly identified in the comments on the duplicate Bug #9103. The OSM overpass-api requi...
-
- Fixed in changeset commit:"7c4c7e897e145eb38ea90be1bf8989e09bec698c".
-
- Jacob Madsen wrote:
> What do you mean? The problem was reproduced, but apparently it's intermediary. That I can't re... -
- Issue just occurred again today, still latest build. Minidump sent on WeTransfer.
-
- What do you mean? The problem was reproduced, but apparently it's intermediary. That I can't reproduce it now doesn't...
-
- Testing with the --noplugins option but haven't done enough on it yet to see if fixed. Haven't tried latest master (c...
-
- appears to be duplicate of #9360
-
- QGIS Master 2.2 (from debian-nightly). This has happened with linestrings from various sources (shapefile, gpx and po...
-
- Steps:
* Add a geometry less table (with some rows inside or add some)
* Enable 'show features count' with right clic... -
07:29 AM Bug report #9584 (Closed): WMS GetFeatureInfo response in GML format is not correct
- XML elements of every particular feature (feature ID, geometry, bounding box and attributes) in GetFeatureInfo GML re...
-
- The dimensions of the identify form are not kept after resizing.
Steps:
* Select identify tool
* Click on a feature
... -
05:22 AM Bug report #8801 (Closed): QGIS fails to start when not in domain
- Home directory is on the network.
I have recently changed to a Windows 7 64bit platform - and there I can open QGIS ... -
- Could I get some feedback on this? Still reproduces from time to time on build commit:57dd877
-
04:40 AM Bug report #9579 (Closed): wrong behavior of svg symbol with data defined properties
- Hi all,
svg symbol (style tab for point shapefile) seems not to take care of the data defined properties (size, offse... -
- Fixed in changeset commit:"ef5ede169023e520bf6844c205b1fc8c06239329".
-
- On SAGA 2.10, Merge Shapes doesn't corrupt the encoding.
I also tried v.overlay from QGIS and it doesn't corrupt th...
2014-02-16
-
12:58 AM Bug report #9578: QGIS Crashes when incorrect plot style for programmatically created composer
- Attached is the minidump file
-
- Attached file is the template we used.
-
11:40 PM Bug report #9578 (Closed): QGIS Crashes when incorrect plot style for programmatically created c...
- This issue replaces #9562
We have been trying to track down the cause of a crash under windows. We use some code sim... -
12:44 AM Bug report #9500: Wrong list of "result entities ID" after a spatial query
- For me the importation works fine (there is a create database command).
I join an archive with shapefiles (and a scre... -
- Jean-Michel Follin wrote:
> Salvatore Larosa wrote:
> > works fine for me either 2.0.1 or master version.
> >
> > Pl... -
- Since I didn't have time to look at the triangulation code, I just upplied the patch now.
>An obvious choice can be ... -
- Ok after more testing we found that on windows the crash does not occur because of the unresolvable path. We are goin...
-
- Hi
I tried to upload the minidump in the original ticket but it seems to have been discarded when the ticket was sub... -
- Giovanni Manghi wrote:
> I'm not sure (still thinking) that the actual behavior is better for the user, but anyway if... -
- Jürgen Fischer wrote:
> The stored data is correct in both cases, isn't it?
yes.
I'm not sure (still thinking) tha... -
- Giovanni Manghi wrote:
> attached a screencast that shows the difference between qgis 1.8 and 2.0/master:
>
> in qgi... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > Jürgen Fischer wrote:
> > > Fixed in changeset commit:"48427e1877c... -
-
- Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > Is this still an issue?
> >
> > Looking at my earlier comments, I ... -
03:00 PM Bug report #9079: Numeric scale error when print
- Sorry - I'm on holidays for a couple of weeks and can't investigate this for 2.2. I'm happy to take a look after that...
-
-
- Seems also to me that something is wrong...
-
- Seems also to me that something is wrong...
-
- The dialog shows the message in the attached image
-
- closing for lack of feedback.
-
- closing for lack of feedback.
-
- Patrick Dunford wrote:
> OK so using 2,01 with the same project and layer files, editing a layer is instantaneous. So... -
- Here GCP file and orginal map.
-
- Michel Proulx wrote:
> Oginal map makes 180 Mo. I can't send it here.
>
> You're right what I get from georeferencer... -
- Oginal map makes 180 Mo. I can't send it here.
You're right what I get from georeferencer is flipped raster!? Flippe... -
- Michel Proulx wrote:
> Dear Giovanni
>
> What's mean and where to find GPC file?
>
> Here is attached final result.... -
- Dear Giovanni
What's mean and where to find GPC file?
Here is attached final result. -
- Dear Giovanni
What's mean and where to find GPC file?
Here is attached final result. -
- Hi, the description is not really clear. Can you add sample data (including the GPC file)? Maybe also a screenshot of...
-
- Hi, the description is not really clear. Can you add sample data (including the GPC file)? Maybe also a screenshot of...
-
- Hi, the description is not really clear. Can you add sample data (including the GPC file)? Maybe also a screenshot of...
-
- Hi, the description is not really clear. Can you add sample data (including the GPC file)? Maybe also a screenshot of...
-
- QGIS 1.8.0 and 2.0.1 when georeferencing topo and geological map, .jpg / tiff. formats; lon, lat originale coordinate...
-
- Correct!
-
- Rhenriques Henriques wrote:
> Just tested in NB, code revision "d26831b" and is not right yet. If the original shape ... -
- Rhenriques Henriques wrote:
> Just tested in NB, code revision "d26831b" and is not right yet. If the original shape ... -
- Rhenriques Henriques wrote:
> Just tested in NB, code revision "d26831b" and is not right yet. If the original shape ... -
- Closing for lack of feedback and as because it seems to be fine on master. Reopen if necessary.
-
- Closing for lack of feedback and as because it seems to be fine on master. Reopen if necessary.
-
- Filipe Dias wrote:
> Alexander Bruy wrote:
>
> > Seems the only possible way to get broken attributes is using "Syst... -
- Filipe Dias wrote:
> Alexander Bruy wrote:
>
> > Seems the only possible way to get broken attributes is using "Syst... -
- I usually get the same issue when in the table of attributes there is a column with a reserved/invalid name, like "de...
-
- Confirmed on master.
-
- Confirmed on master.
-
- Confirmed on master.
-
08:08 AM Bug report #9572 (Closed): legend of categorized renderer of layers with joins incorrect
- I have noticed a not correct display of categorized type legend using
joined fields.
If I use one of the joined field... -
- see also #9485
-
- duplicate of #9456
-
- duplicate of #9456
-
- Chars like "ã" or "ç" in the username are not an issue here on Windows 7 on both qgis 2 and master.
-
- Chars like "ã" or "ç" in the username are not an issue here on Windows 7 on both qgis 2 and master.
-
08:42 AM Bug report #9573 (Closed): hostnames with non-ascii characters cause python console to fail.
- Can't open Python consoler right after a clean install. This could be caused by my username in Windows which contains...
-
12:43 PM Bug report #9576 (Closed): SLD rule-based style export loses quotes around layer names
- When exporting a rule-based layer style to an sld file, any quotes in the rules are removed. If layers have hyphens i...
-
- I can replicate the problem in QGIS 2.0.1 (on linux), but not with QGIS master, so I assume this has been fixed in th...
-
- I can replicate the problem in QGIS 2.0.1 (on linux), but not with QGIS master, so I assume this has been fixed in th...
-
03:00 AM Bug report #9571 (Closed): Qgis crash when remove group of layers create with python
- hi after that i load many layers i run this code in python console...
-
- I think it would be useful to have a more concise way to specify multiple numerical ranges for a single rule when sty...
-
08:46 AM Feature request #9530: Show coordinated as grid codes
- Giovanni
Thanks for your interest in this.
No bother you closing this ticket.
Plenty more QGIS stuff for you to get i... -
- Geoff Owen wrote:
> Hello Giovanni.
> Thanks for getting involved.
> I think my suggestion would be useful but only f... -
- Geoff Owen wrote:
> Hello Giovanni.
> Thanks for getting involved.
> I think my suggestion would be useful but only f... -
- Fixed in changeset commit:"7f9a755f271a40c2e7864f7646cb5257d722d1ff".
-
- Jacob Madsen wrote:
> What more can I do to assist you in fixing this issue? All I can say at this point is, that I'v... -
- What more can I do to assist you in fixing this issue? All I can say at this point is, that I've seen this problem on...
-
- I'm on qgis master/ubuntu and it's weird because what I see is:
* for lines I see what you describe for polygons
* ... -
- I'm on qgis master/ubuntu and it's weird because what I see is:
* for lines I see what you describe for polygons
* ... -
- Cannot confirm here on QGIS master on Ubuntu.
-
- Cannot confirm here on QGIS master on Ubuntu.
-
02:21 AM Bug report #9570 (Closed): Opening Layer -> Properties 12 times crashes QGIS master
- When you open the project:
First I click on Layer -> Properties, or double-click on the layer
Second I close the "P... -
- Fixed in changeset commit:"ba47c9feb62ecaa102d16eff8ac61363047e51f1".
-
2014-02-15
-
- Could you please attach the minidump file?
What happens on linux if the image does not exist? Crash or just no pictu... -
- Hello Giovanni.
Thanks for getting involved.
I think my suggestion would be useful but only for a very few users.
Mus... -
- Geoff Owen wrote:
> Hello
> Coordinates appear in canvas view at bottom of screen.(Please see attached screen shot 1)... -
- Geoff Owen wrote:
> Hello
> Coordinates appear in canvas view at bottom of screen.(Please see attached screen shot 1)... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > Jürgen Fischer wrote:
> > > Fixed in changeset commit:"48427e1877c... -
-
10:05 AM Bug report #9474: New vertices added to polygons break shape file topology
- Hi Martin,
Thanks for looking into this;
Indeed my sample file doesn't seem to reproduce the problem. I apologise fo... -
- Hi Martin,
Thanks for looking into this;
Indeed my sample file doesn't seem to reproduce the problem. I apologise fo... -
- I fail to see what is actually wrong there - OpenJUMP and QGIS seem to render the layers in the same way.
Maybe your... -
- Fixed in changeset commit:"edfce6897df0355bb2db1914dfe57c44e705a856".
-
- Fixed in changeset commit:"675746c2d7bdba0b7e3f15a3c96b5a5c2709a41f".
-
- To reproduce the bug:
* Enable the topological editing in the snapping options
* Using the nodetool, move a vertex o... -
- I often have to zoom in or out during edition, either to see a larger area or to place a point more precisely and avo...
-
- Martin Dobias wrote:
> Does it happen with PostGIS or SpatiaLite or both?
Hi Martin,
I tested only PostGIS. -
- QGIS was respecting the tile matrixes of the services, which matrix height and width were too small. The service was...
-
- QGIS was respecting the tile matrixes of the services, which matrix height and width were too small. The service was...
-
- Followup in commit:b5897c7 - now with no axis switch the map is rendered correctly, but with invert/ignore it is "swa...
-
- If there was an issue this is now fixed in qgis master. I tested on both Linux and Windows and you can add path to fo...
-
- If there was an issue this is now fixed in qgis master. I tested on both Linux and Windows and you can add path to fo...
-
- I ca replicate the issue (even with mush less edits with the reshape tool). What is worst is that in some case the to...
-
- Sample data/project (and a screencast in this case) would help a lot try replicate this issue on other computers.
-
- Sample data/project (and a screencast in this case) would help a lot try replicate this issue on other computers.
-
- Sample data/project (and a screencast in this case) would help a lot try replicate this issue on other computers.
-
- Sample data/project (and a screencast in this case) would help a lot try replicate this issue on other computers.
-
- closing this?
-
- closing for lack of feedback (and because it is most likely fixed).
-
- closing for lack of feedback (and because it is most likely fixed).
-
- I have tested again and I can't also replicate the issue anymore, please reopen if necessary.
-
- I have tested again and I can't also replicate the issue anymore, please reopen if necessary.
-
- Radim, I got something that seems to work OK, attaching the diff patch.
I've tested it using a bunch of layer item (...
2014-02-14
-
- If I re-enable the if ( currentLegendItem->style() != QgsComposerLegendStyle::Hidden ) condition, the legend's vertic...
-
- Radim, I think the problem might be located around line 837 of qgscomposerlegend.cpp and the commented out line 830: ...
-
- Fixed in changeset commit:"366daa7e3b71f1fe890cd961779a5548d3ad7b47".
-
- I have created a map composition with Atlas settings where the map scale is fixed to a certain value in 2.0.
When I ... -
11:55 AM Bug report #9208: QGIS crashes when using addAttributes on any vector data provider
- It doesn't happen with QGIS 32bit on Windows (at least on my machine)
-
- Also reproducable on Linux
-
- Also reproducable on Linux
-
- I'm not expert with SIP. I thought QgsFields were automatically casted to lists by the SIP wrapper, but I see that __...
-
- Giovanni Allegri wrote:
> Here you can find a test shapefile [1] and a tiny test script [2]. I've just tested it with... -
- PS: it's just a test. In general I do changes to the layers in an editing session. I just wanted to report two things...
-
- Here you can find a test shapefile [1] and a tiny test script [2]. I've just tested it with QGIS 64bit through the py...
-
- I can not reproduce this on Mac OS X 10.9 (haven't tested elsewhere).
Tim, there seems to be an issue with the **Cad... -
- Tim,
Even when the crash reporter dialog doesn't show up, the crash report should still written to your user logs. C... -
- Yes, I always use .PNG so Etienne's right. Sorry for closing the ticket.
-
08:22 AM Bug report #8493: "Save as Image" defaults to archaic media type
- output format is saved in the lastSaveAsImageFilter user pref so default value has no effect once you select another ...
-
- Hi Filipe from what did you conclude that .PNG is now the default?
From a fresh rebuild from now, in
Menu -> Project... -
- In Menu ->File -> Save image .PNG is now the default.
-
- Giovanni Manghi wrote:
> Jürgen Fischer wrote:
> > Fixed in changeset commit:"48427e1877cdb762af14f31be85b984a490828e... -
- Hi, I proposed a slightly different change:
https://github.com/qgis/QGIS/pull/1037
Best Regards
Alvaro -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"48427e1877cdb762af14f31be85b984a490828e2".
it does not seems to w... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"48427e1877cdb762af14f31be85b984a490828e2".
it does not seems to w... -
- Martin Dobias wrote:
> I meant my old plugin :)
it seems equally slow (many seconds) with a couple hundred of tables... -
- Jacob Madsen wrote:
> I was unable to upload the minidump here (file too large apparently), so I've sent it to your e... -
- I was unable to upload the minidump here (file too large apparently), so I've sent it to your email using WeTransfer....
-
- Here is a minidump file generated by yesterday's crash (which I could no reproduce later). I really hope you can use ...
-
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
- A few notes:
* the crash is confirmed on qgis 2.0.1 on Windows, but not on master. QGIS 1.8 also didn't crashed so a... -
07:00 AM Bug report #9565 (Closed): Dxf2Shp converter plugin does not generate any output with the provide...
- I have attached the file and dump file. Unfortunately i don't know with what program to read the 24 megabytes crash m...
-
- tested again on Windows/master 32bit and the issue seems gone.
-
- tested again on Windows/master 32bit and the issue seems gone.
-
- Hi
Yes I can confirm they are enabled.
Regards
Tim -
- I am not able to add longlat (4326) WMS after commit:ba0a637. It seems that axis are somehow messed. I tried with all...
-
- Hello
Coordinates appear in canvas view at bottom of screen.(Please see attached screen shot 1).
Coordinates also app... -
- Hello
Coordinates appear in canvas view at bottom of screen.(Please see attached screen shot 1).
Coordinates also app... -
- Hi
I've not so far been able to reproduce this in build commit:57dd877, however I need a colleague to verify. He won... -
- Fixed in changeset commit:"24b0a6468937d195e87f1f2528c4d0f3f328eaf7".
-
- I can't replicate this. It may be OSX specific...? Can you test under a different platform?
2014-02-13
-
- Can you test using QgsComposition::renderPage() to export the pdf and confirm if this works correctly? renderPage set...
-
- Using master with a composer template which is loaded in python, the generated pdf includes the composer guides. Can ...
-
- We are making templates to be used by users on different operating systems. One of our templates has a north arrow im...
-
- Tim - can you confirm whether smart guides is enabled for this composition?
-
- Hi
I am reopening this issue - there are still cases where no inference lines are show. I am attaching a short scre... -
- Hi
I am reopening this issue - there are still cases where no inference lines are show. I am attaching a short scre... -
- Hi
I am reopening this issue - there are still cases where no inference lines are show. I am attaching a short scre... -
- Hi
I am reopening this issue - there are still cases where no inference lines are show. I am attaching a short scre... -
- I meant my old plugin :)
-
- Martin Dobias wrote:
> Giovanni, is there such problem with slowness also with PostGIS manager plugin?
do you refer ... -
- I have a template that I need to edit (using QGIS Master commit:dae8ea66a169db7539a08dc81d2ebe9dab789f37).
Although ... -
- Testing against commit:dae8ea66a169db7539a08dc81d2ebe9dab789f37 I can note that it is no longer guaranteed to get the...
-
- To replicate:
Using QGIS head on OSX
# Open QGIS
# Blank project
# New composer map (default for name)
# Close comp... -
- Giovanni Manghi wrote:
> As far I can see this is still an issue at least on osgeo4w 64bit
Fixed in OSGeo4W. -
- Giovanni Manghi wrote:
> As far I can see this is still an issue at least on osgeo4w 64bit
Fixed in OSGeo4W. -
- I'm closing this out - Martin Dobias has an implementation in a branch which will be merged post QGIS 2.2
-
- Closing this as old.
-
- please contact the author of the plugin: http://michaelminn.com/linux/mmqgis/
-
- please contact the author of the plugin: http://michaelminn.com/linux/mmqgis/
-
03:14 PM Bug report #9558 (Closed): MMQGIS: spatial join: 'QgsRasterDataProvider' object has no attribute ...
- Hi all.
Getting a bug in MMQGIS when trying to do a spatial join; the following code pops up as soon as I select spa... -
- Hi Martin,
Please see the attachment:
* bla_start.shp is the shape before modification
* bla_end.shp is the shape af... -
-
- Please attach your shapefile.
-
- Fixed in changeset commit:"dae8ea66a169db7539a08dc81d2ebe9dab789f37".
-
- duplicate of #8262
-
- I already reported it as #8262 but no news so far
-
- Don't know if this has been talked before. But I think it would be nice to have a "add feature" button in the digitiz...
-
- For now: the easiest would be to use a database which has support for "ON DELETE CASCADE"
This will open up a questi... -
- Changing to feature request.
-
- Changing to feature request.
-
-
-
-
-
-
-
-
-
- See also "OSGeo4W !#402":http://trac.osgeo.org/osgeo4w/ticket/402
-
- Donovan Cameron wrote:
> Sorry Giovanni - re-opened.
Why? This isn't a QGIS problem.
-
- Donovan Cameron wrote:
> Sorry Giovanni - re-opened.
Why? This isn't a QGIS problem.
-
11:14 AM Bug report #9557 (Reopened): OSGeo4W x64 installer missing Windows manifest
- Sorry Giovanni - re-opened.
-
- Sorry Giovanni - re-opened.
-
- Hi Jacob. I've closed this ticket for now - please let the OSGeo4W package maintainers know of this issue at http://t...
-
- Hi Jacob. I've closed this ticket for now - please let the OSGeo4W package maintainers know of this issue at http://t...
-
- The OSGeo4w installer http://download.osgeo.org/osgeo4w/osgeo4w-setup-x86_64.exe is missing a Windows manifest, which...
-
-
- Martin Dobias wrote:
> After all, we do not need a perfect Delaunay triangulation for the interpolation - much more i... -
- I can confirm the issue, and probably is also the same cause of this #9151
-
- I can confirm the issue, and probably is also the same cause of this #9151
-
- Jürgen Fischer wrote:
> download is gone.
ouch, will try to recover that. -
- Geoff Owen wrote:
> Hello Leyan.
> Thanks for query.
> I will try to explain what I want to display but first will ne... -
- Geoff Owen wrote:
> Hello Leyan.
> Thanks for query.
> I will try to explain what I want to display but first will ne... -
- Geoff Owen wrote:
> Hello Leyan.
> Thanks for query.
> I will try to explain what I want to display but first will ne... -
- Please let the OSGeo4W package maintainers know about this - they should be able to fix it.
-
- Please let the OSGeo4W package maintainers know about this - they should be able to fix it.
-
- Jürgen Fischer wrote:
> Mathieu Pellerin - nIRV wrote:
> > I've just upgraded by system to ubuntu's upcoming trusty 1... -
- Jürgen Fischer wrote:
> Mathieu Pellerin - nIRV wrote:
> > I've just upgraded by system to ubuntu's upcoming trusty 1... -
- Mathieu Pellerin - nIRV wrote:
> I've just upgraded by system to ubuntu's upcoming trusty 14.04 system. The debian-ni... -
- I've just upgraded by system to ubuntu's upcoming trusty 14.04 system. The debian-nightly packages are still affected...
-
- Jacob Madsen wrote:
> No, it reproduced at will earlier today on completely fresh installs. The server is Geoserver 2... -
- No, it reproduced at will earlier today on completely fresh installs. The server is Geoserver 2.4.3, and the data com...
-
- Jacob Madsen wrote:
> I have uploaded 2 sample projects for this issue. The projects contain the exact same WFS refer... -
- Sent to your email, Jürgen. Thanks in advance.
-
- I have uploaded 2 sample projects for this issue. The projects contain the exact same WFS references. One is created ...
-
- I have uploaded 2 sample projects for this issue. The projects contain the exact same WFS references. One is created ...
-
- Sorry, but I can still reproduce this with build commit:57dd877. I create a WFS-project in QGIS x64, and when opening...
-
-
- Kay F. Jahnke wrote:
> I found the error: The definition of one of my CRSs was incomplete. The Proj4 string QGIS prov... -
- Can you provide more detail? Doesn't crash here.
-
- Fixed in changeset commit:"28fb634876ac411a2d3c27ae1fa259b77043596b".
-
- Fixed in changeset commit:"588d5f425f09039efbb7bd3172d2fc25b39a43d1".
-
- Thanks Martin.
Regards
Geoff -
- Fixed in changeset commit:"40b48849b527215f9a5e2c6216122cb33eb5a915".
-
- Thank you Nyall!
-
- Fixed in changeset commit:"9e948dfb2bca5f69835790e83247db444661580d".
-
- actually, I was wrong, issue also exists in Linux. I was running qgis from the directory where the .vrt and .csv file...
-
- Perhaps the difference is that the current directory is not set to that of the .vrt file in windows, whereas it is in...
-
- * html height: commit:2a4f104 - the dialog is opened before items are inserted, that should allow them to justify hei...
-
- Fixed in changeset commit:"8f829750a24162d046eeb09cdf80d922fd88f170".
2014-02-12
-
- Hi, explicitly setting datasource tag to <SrcDataSource relativeToVRT="1">cwbody.csv</SrcDataSource> does the trick....
-
- I confirm the issue on windows with qgis-dev, using osgeo4w 32 bit installer. ogrinfo can read both datasets, but qg...
-
- I confirm the issue on windows with qgis-dev, using osgeo4w 32 bit installer. ogrinfo can read both datasets, but qg...
-
- Works for me using both relative and absolute path in linux using 2.0.1 and (mostly) recent master, with this .csv fi...
-
- I assume the .csv and .vrt file are in the same directory?
Perhaps you are missing the relativeToVRT tag in SrcDataS... -
- Hi, I build here a vrt on a simple csv file, and QGIS opens it correctly only if I put a absolute file in datasource....
-
12:40 AM Bug report #9552 (Closed): Strange errors working with 10 digit real or integers
-
- When doing this calculation in field calculator on a shape file:
FromToStop = 100000 * From_stop + To_stop
results... -
-
- When doing this calculation in field calculator on a shape file:
FromToStop = 100000 * From_stop + To_stop
results... -
- When doing this calculation in field calculator on a shape file:
@FromToStop = 100000 * From_stop + To_stop@
result... -
-
- Oops, sorry. Here it is.
-
-
- No file attached.
-
- See the attached file
-
10:27 PM Bug report #9328 (Closed): Path requires Return to be saved
- Fixed in changeset commit:"c060164bca533db2398e527bdd792521ad4c3490".
-
- See https://github.com/qgis/QGIS/pull/1167
-
- See https://github.com/qgis/QGIS/pull/1167
-
- I'm marking this as a blocker as it's a regression from 2.0.
If a layer uses data defined colours, it's currently i... -
- When I initially expand an item in the browser panel tree which contains a lot of children, the vertical scrollbar of...
-
05:03 PM Feature request #9549 (Open): Delete feature and related records.
- It is cool that I can digitize a feature, then populate the child tables (as defined by QGIS Relations). But when I ...
-
- Fixed in changeset commit:"57dd8779acf0495088de4eca89fd5d0accc5e755".
-
- Since the recent change in syntax highlighting, it's impossible to retrieve columns or load a layer when "load as new...
-
- GML parser was fixed in commit:4d660d1.
You should now be able for example to query features, highlight geometry of ... -
- This is the output I have now:...
-
- 1) I have changed title from 'crashing' which was misleading to 'disappeares'.
2) Setting the height of QgsIdentifyR... -
- Hello Leyan.
Thanks for query.
I will try to explain what I want to display but first will need to explain how the gr... -
- download is gone.
-
- This is a feature request but it's also a bug. It's annoying to work with the composer when it gets de-centered. Mayb...
-
- Fixed in changeset commit:"9d379f0d1d1ad8e712c5bb449e5b0d44280fd635".
-
- When saving as DXF, the resulting file has no extension, so it is not visible from Browser, etc.
-
- probably also fixed in commit:8d7e61abd (Qt 4.7 apparently crashed when the end guard is used in iterator find). Ple...
-
- Fixed in changeset commit:"44885511ff71b2aa9f5b0648de331430313fd8e2".
-
-
- Fixed in changeset commit:"c64a051b1c716e5d34fc385b92ec7971ae8fec26".
-
- Raised a new ticket for that: #9546
-
- There is an increasing number of additional features in expression engine that make sense only in particular context....
-
- Deleting of columns in shapefiles depends on GDAL/OGR. GDAL/OGR 1.7 doesn't support removal of attribute from shapef...
-
- Deleting of columns in shapefiles depends on GDAL/OGR. GDAL/OGR 1.7 doesn't support removal of attribute from shapef...
-
05:18 AM Bug report #9545 (Closed): Delete attribute in layer properties fields for Shapefile
- Delete attribute function
in layer properties fields for Shapefile
Layer _ properties _ fields _ toggle editing mode ... -
- Fixed in changeset commit:"5bee17218db3576a6a172eec5ef6d555fc023b4d".
-
- Fixed in changeset commit:"a64610186173c0b274cebcc9a858efcd0680057c".
-
- fixed with commit:f3b26494
-
- I can replicate the issue in 2.0.1 with a field name with a dash ("a-b") but not with underscore ("a_b"). In QGIS mas...
-
- I can replicate the issue in 2.0.1 with a field name with a dash ("a-b") but not with underscore ("a_b"). In QGIS mas...
-
- Exactly the same problem as #5239
-
- Exactly the same problem as #5239
-
- Duplicate of #5239
-
- Duplicate of #5239
-
- The numerical stability issues are apparent especially in cases when points are forming rectangles, ending up swappin...
-
- provider side fixed in commit:3b438e22. Editing dates still requires support in the edit widgets (using the calendar...
2014-02-11
-
- Oracle time formats are mysterious, but it could be worth trying if setting "NLS_DATE_FORMAT" environment parameter w...
-
- The error is:
SQL: ORA-01843: not a valid month
Impossibile eseguire l'istruzione
Errore: INSERT INTO
"Q... -
- I agree with the solution. However, this should not be closed, as it is still an issue for the user. Better changing ...
-
-
- Not actually a bug in atlas - $rownum is only usable when in field calculator. The correct solution is to have contex...
-
- Not actually a bug in atlas - $rownum is only usable when in field calculator. The correct solution is to have contex...
-
- Not actually a bug in atlas - $rownum is only usable when in field calculator. The correct solution is to have contex...
-
- The current behavior is considered as the right one. If there is something in the keyboard, you are allowed to try pa...
-
- Supposedly a duplicate of #5239
When reporting bugs, please try to include more information: options you have used w... -
- Supposedly a duplicate of #5239
When reporting bugs, please try to include more information: options you have used w... -
- SO: Windows 7 (64-bit)
OSGeo4w (32-bit)
QGIS version 2.1.0-Master QGIS code revision f06e72e
Compiled against Qt 4.7... -
- Tested again with current master.
I noticed, that when _updating_ a column, the rollback is fast. But when I _add_ a... -
- If you create the same project with WFS layers in QGIS 32-bit, will it crash when reopened in QGIS 32-bit?
-
- Reproduces still in latest master
-
- Could I get some feedback on this issue please?
-
- Fixed in changeset commit:"9d7ef65a2dd4d5a4b07e37af01cff04146bca34e".
-
- Should this be at OSGeo4W trac for issues? Not sure if this is a QGIS issue.
http://trac.osgeo.org/osgeo4w/report/1 -
07:31 AM Bug report #9541 (Closed): QGIS package in osgeo4w missing shortcuts
- Just updated to qgis 2 with osgeo4w. Installer seemed to go fine, but no shortcuts were placed on the desktop or in s...
-
09:26 AM Bug report #9376: QGIS crash on sorting attribute columns on WFS layers.
- f06e72e is from Feb, 8th where db29ebc is from Feb, 10th .. so I guess it is fixed ..
-
- Still reproduces in nightly from today, sorry. Build f06e72e
-
09:06 AM Bug report #9537 (Closed): global name not defined
- ok, there was some extra spaces in front of TARRAY which apparently had been eluding my eyes for the last 2 days! :/ ;)
-
- ok, there was some extra spaces in front of TARRAY which apparently had been eluding my eyes for the last 2 days! :/ ;)
-
- Hi.
I'm trying to use a plugin (ProcessingPermaclim provider), but with one of the scripts I get the error "global n... -
- Fixed in changeset commit:"684dd890a3359a2fb189b289b0bb65a42a9f4105".
-
06:10 AM Bug report #9266: QGIS gets stuck during on the fly reprojection
- Comment concerning use of shape files:
I experience the same problem using shapefiles relatively close to the North ... -
- Comment concerning use of shape files:
I experience the same problem using shapefiles relatively close to the North ... -
- Comment concerning use of shape files:
I experience the same problem using shapefiles relatively close to the North ... -
- Comment concerning use of shape files:
I experience the same problem using shapefiles relatively close to the North ... -
- Indeed. I have tested and the workaround works fine.
I noticed another issue though. In the referencing layer (child... -
- Indeed, this seems to be behaving strange... Will have a look at it sometime.
Please note that for the time being yo... -
- I have been doing tests with the new relations functionality. Trying to use the relation reference widget to edit my ...
-
- Giovanni, is there such problem with slowness also with PostGIS manager plugin?
I believe the main issue is with the... -
- Please file bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
- Please file bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
- Please file bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
04:44 AM Bug report #9540 (Closed): Numerical Vertex Edit Plugin error
- Numerical Vertex Edit 0.2.0 return an error when selection does not contain any point...
-
- This was taken into account when designing the low-level implementation of the relations functionality. However, the ...
-
- Fixed in changeset commit:"61ff7432107da0a7ce991f68094b9f42dd1027a5".
-
- I will have a look at Alex's patch...
-
- +1 for this. thanks.
-
- Paolo, the "slowdown" is a freeze of the application that leaves the user with the only option to kill QGIS (see the ...
-
03:17 AM Bug report #6995: db manager's SQL window freezes with long query (due to syntax coloring?)
- Maybe we should drop current implementation and use something another instead? For example QScintilla. I talked with ...
-
- -1: even on an Atom machine, the slowdown is acceptable, and the syntax colouring is a big plus.
If we remove it now,... -
- The SQL syntax highlighting is highly inefficient, involving more than a thousand of regular expressions being matche...
-
- This should be defined on the field and not on a widget IMO.
It is about the same level of abstraction as the domains... -
- Note: Such default values would conflict with the default values the data provider can deliver (eg. in postgres).
-
01:28 AM Feature request #9535 (Closed): Set standard value in value map
- It would be great if you could be able to set a standard value in the value map edit widget. This standard value shou...
-
- Does it happen with PostGIS or SpatiaLite or both?
-
- Alvaro Huarte wrote:
> Yes I built GQIS+master using the guide, it works fine. Then, why 'debian-nightly' not work?
... -
- Jürgen Fischer wrote:
> Alvaro Huarte wrote:
> > You are right, but I do not know how to solve it. I guess I should u... -
- OK so using 2,01 with the same project and layer files, editing a layer is instantaneous. So are the saves.
I'll giv... -
- What do you mean by alphanumeric format? Can you give an example of what you want to display?
2014-02-10
-
- did you try to call QgsAttributeTableModel::loadLayer() ? I reckon that should refresh the cache as well.
A refresh ... -
09:20 AM Feature request #9471: attribute table isn't refreshed after save
- > It can introduce a rather big overhead and is likely to actually miss events (e.g. a trigger updating a different l...
-
- See https://github.com/qgis/QGIS/pull/1159
-
01:49 AM Bug report #9523 (Closed): openProject macro won't load when enable Macros setting set to Ask
- Hello,
If I have a Project with a Macro as shown below, and I set Settings->Options->Enable Macros to "Ask", the o... -
-
- closing for the lack of feedback.
-
- closing for the lack of feedback
-
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
-
- closing for the lack of feedback.
-
-
- Might be a duplicate of #8979. Could you verify that the problem is gone in current master.
-
- Might be a duplicate of #8979. Could you verify that the problem is gone in current master.
-
- Alvaro Huarte wrote:
> You are right, but I do not know how to solve it. I guess I should use QtCreator or Eclipse-CD... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, am I right in understanding that:
> - you cannot replicate the issue if you ... -
- Alvaro, am I right in understanding that:
- you cannot replicate the issue if you build QGIS yourself on Ubuntu 13.10... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the builds I use on my three machines with which I can replicate all the tim... -
- For the second problem I have raised a ticket in GDAL/OGR: http://trac.osgeo.org/gdal/ticket/5379
-
- Fixed in changeset commit:"e6c2ecd9f36e6b4924b08e185443e7eebbfb2467".
-
- Fixed in changeset commit:"85f6fb8b7121f7b41052feb1b4a9dcb8b528aaab".
-
02:17 PM Bug report #8795 (Closed): Potential WFS filtering issue
- Fixed with commit:c9a88c147c20b09fd8b0287aafd9811ac314bbe0
-
- Fixed with commit:c9a88c147c20b09fd8b0287aafd9811ac314bbe0
-
- Fixed with commit:c9a88c147c20b09fd8b0287aafd9811ac314bbe0
-
- Fixed with commit:c9a88c147c20b09fd8b0287aafd9811ac314bbe0
-
12:29 PM Feature request #9533 (Open): Rotate feature
- The rotate feature is really nice. However I need a rotate that aligns an old map with multiple layers with a current...
-
- I am creating maps of a city with roads, buildings, lots etc. Snapping on 4. When using the node tool QGIS crashes qu...
-
- I am working on using QGIS to enter borehole data using QGIS Relations. It is a snap to create 1:1 and 1:N relations...
-
- Hi Patrick,
can you confirm that this also is the case when you disable ALL your plugins?
There have been some issu... -
- Reporting on the paste to the second layer, putting the second layer into edit mode required another 30 MB of memory....
-
- Reporting on the paste to the second layer, putting the second layer into edit mode required another 30 MB of memory....
-
- OK. So this is what happened. It took over an hour to put the layer into edit mode. And QGIS increased its memory usa...
-
- Can you confirm that on the same machine, the same files and operations are ok with qgis 2.0.1?
tagging as blocker ... -
- Can you confirm that on the same machine, the same files and operations are ok with qgis 2.0.1?
tagging as blocker ... -
- Can you confirm that on the same machine, the same files and operations are ok with qgis 2.0.1?
tagging as blocker ... -
- Can you confirm that on the same machine, the same files and operations are ok with qgis 2.0.1?
tagging as blocker ... -
- Since I updated to 2.1.0 dev (and also Windows 8.1) from 2.0 and Windows 8, I have noticed the layers I am working on...
-
- I create all my projects and add new layers using the 'EPSG:27700 OSGB 1936 British National Grid CRS'.
This currentl... -
-
-
- Fixed in changeset commit:"8d7e61abd2cc0c1e41eeb4b68fe96dc148997d13".
-
- #8068 has been closed. Does this issue can be closed ?
-
07:02 AM Feature request #9529 (Open): Set colors in a Column according to the applied symbology
- Hi,
Sometimes, it is nice to give labels the same color as the objets they refer to.
When there are too many classe... -
- I'm using QGIS on a windows based tablet with a touch sensitive screen for field surveying work. My work situation wo...
-
- Hi Carlo, I don't think that's the same issue. You might want to ask on the QGIS mailing list - http://www.qgis.org/e...
-
- I'd have thought this was a bug rather than a feature.
There's a + icon I can click which does stuff for other data t... -
- Fixed in changeset commit:"1dec7b09acdad0e571d626bbb6a453d1803edbb2".
-
- Matthias Kuhn wrote:
> I am not at home to test now but when I tested yesterday it seemed to me that the field calcu... -
- I am not at home to test now but when I tested yesterday it seemed to me that the field calculator is still faster t...
-
- Matthias Kuhn wrote:
> Jürgen Fischer wrote:
> > Not anymore. That was the case when the previous values were not st... -
- Ah, the form view and not the table view.
/me should read more carefully.
I will take care of this for 2.4 with the... -
- Jürgen Fischer wrote:
> Not anymore. That was the case when the previous values were not stored in the first undo co... -
- I often need to project single coordinate pairs (as in cs2cs or gdaltransform). I cannot find an equivalent in QGIS. ...
-
-
- Fixed in changeset commit:"5aa46cbeb30144a86d52cf26b7b176f8f523b876".
-
- If a plugin's author string contains a "&" character in metedata, installation from the plugin manager will fail.
I d... -
- Steps to reproduce:
* Use categorized, graduated or rule-based symbology on a vector layer
* Activate "Show Feature C...
2014-02-09
-
- Fixed in changeset commit:"c465c9f03d5e190e0aa1491943bdadb18716587e".
-
- Sounds reasonable. Nevertheless, I think this option should be added, as without it the user case described is seriou...
-
- Sounds reasonable. Nevertheless, I think this option should be added, as without it the user case described is seriou...
-
- OK, that's a good point. However I don't think the existing option for antialiasing in settings is the correct soluti...
-
- OK, that's a good point. However I don't think the existing option for antialiasing in settings is the correct soluti...
-
- OK, that's a good point. However I don't think the existing option for antialiasing in settings is the correct soluti...
-
04:44 AM Feature request #9281: [composer] add option to disable antialiasing when exporting compositions
- So it is definitively a bug because It donnot reproduce exactly what there is in the canvas.
The goal of composer is... -
- The antialiasing if no good for the black-white TIFF4 images.
In the tiff4 the main goal is have always only two col... -
- The main issue with the attached layer are the few huge geometries, especially the one with ID 26569 - with more than...
-
- The main issue with the attached layer are the few huge geometries, especially the one with ID 26569 - with more than...
-
- Since GEOS 3.1 there is support for some geometry operations on so called prepared geometries which can greatly impro...
-
- Some time ago the WKB handling has been updated to use memcpy, so it should be working now in master. Please reopen i...
-
- Some time ago the WKB handling has been updated to use memcpy, so it should be working now in master. Please reopen i...
-
- Some time ago the WKB handling has been updated to use memcpy, so it should be working now in master. Please reopen i...
-
- Fixed in changeset commit:"db29ebcffbc8a7b16331dd49da17f25662315e07".
-
- Fixed in changeset commit:"ac9eed7e052428722cd66ce0e39aee933c8176e6".
-
05:36 PM Bug report #9213: 'bad_alloc' error at QGIS start
- Pull request with the fix:
https://github.com/qgis/QGIS/pull/1157 -
- I found the source of the bug.
The QgisApp class defined in src/app/qgisapp.h and src/app/qgisapp.cpp has a data mem... -
- Matthias Kuhn wrote:
> It's not quite the same, as when doing changes the first time via the field calculator, one it... -
- It's not quite the same, as when doing changes the first time via the field calculator, one iterator is opened and lo...
-
- Salvatore Larosa wrote:
> For me it still not fixed. I am getting always a QGIS freezing on rollback action.
It's fa... -
- For me it still not fixed. I am getting always a QGIS freezing on rollback action.
-
- When applying a filter like bbox does not retrieve the features from a WFS data url.
Steps to reproduce:
* using thi... -
- I think so. Closing as duplicate.
-
- I think so. Closing as duplicate.
-
- duplicate of #9509?
-
- To reproduce:
* Open a layer with a big amount of features (...and with a slow backend)
* Start editing
* Open the f... -
08:55 AM Bug report #9079: Numeric scale error when print
- I can reproduce this behaviour. The output seems to have only 2/3 of the scale which is entered in the print composer...
-
- aperi2007 - wrote:
> But, I guess perhaps there some other code bug, because also thinking to a simple square root re... -
- Fixed in changeset commit:"71c1ad103364d3d83d02890e712b9dad442c9d08".
-
- Matthias Kuhn wrote:
> Please note that this also happens with the attribute table closed and should therefore be tre... -
- I noticed the same. This is due to the undo operation requesting all the features in single requests AFAICT.
Please ... -
- Fixed in changeset commit:"77a24cbeb44b4ecd48c469b85850025da246ae95".
-
- Closing for lack of feedback, probably does not affect recent versions.
-
- Closing for lack of feedback, probably does not affect recent versions.
-
- We need more details: does it happen with any project? E.g. does it crash if you save just empty project in windows a...
-
-
- I cannot replicate. Please try to add more details:
- does it happen also with other files, different geometry types?... -
- There is currently no possibility for a provider to push change-notifications back to QGIS. We would need a new API f...
-
03:49 AM Bug report #9507: QGIS crash when opening a HTML Map Tip with some mistakes
- You are right. I've tried on Ubuntu and it doesn't happen.
-
- Please don't file tickets for support requests - use the mailing lists.
-
- Please don't file tickets for support requests - use the mailing lists.
-
01:52 AM Feature request #9518 (Closed): ORACLE SPATIAL DATA CONNECTION
- Good morning,
I have a problem with the connection to the spatial data with oracle. When I go to test the connection... -
- Good morning,
I have a problem with the connection to the spatial data with oracle. When I go to test the connection... -
-
- duplicate of #6430
-
- Fixed in changeset commit:"f15c8869407c89cc771841d8ce218db01c435c7f".
2014-02-08
-
- Hm... a randomly occurring bug, and system dependent... could be some specific local problem. I am not sure if we can...
-
- Hm... a randomly occurring bug, and system dependent... could be some specific local problem. I am not sure if we can...
-
-
- Closing because of no feedback over 1 year. Please reopen if necessary.
-
-
- Just tested in NB, code revision "d26831b" and is not right yet. If the original shape CRS is used in the project def...
-
- Giovanni Manghi wrote:
> Alvaro Huarte wrote:
> > Hi Giovanni, the pull request 'https://github.com/qgis/QGIS/pull/10... -
- Alvaro Huarte wrote:
> Hi Giovanni, the pull request 'https://github.com/qgis/QGIS/pull/1071' has not yet been merged... -
- Hi Giovanni, the pull request 'https://github.com/qgis/QGIS/pull/1071' has not yet been merged.
Do you think that it ... -
- This seems really fixed to me. Please reopen if necessary.
-
- This seems really fixed to me. Please reopen if necessary.
-
- Think this should be a blocker, since it's a new feature which isn't working as expected.
I had a go at fixing it by... -
- Fixed in changeset commit:"a9ac0d70f49663741aa70d03aaddc496a0b6e323".
-
- Fixed in changeset commit:"133af645fe1017371424254c8ea80ba2b2660071".
-
- Fixed in changeset commit:"8d5862c8fd88ddd86c6ed748dbc3b40a1f975ac5".
-
04:37 PM Feature request #9516 (Open): Allow to specify a bounding box column in addition to the geometry ...
- Some sql queries build the geometry column on-the-fly, but can still return a bounding box from a real table. The mos...
-
- Is this still the case? QGIS doesn't crash if a delimited text file is removed while qgis is running nor when a pro...
-
- Fixed in changeset commit:"d4043befcc9b92bc565563506bf2fbbb013aed43".
-
- The help for data-defined offset currently reads: <x>,<y>
To get this feature working, it seems to be necessary to re... -
- Fixed in changeset commit:"52616b6549bf43eee3cccc79f73aa890da5f3fab".
-
- Fixed in changeset commit:"48427e1877cdb762af14f31be85b984a490828e2".
-
- Fixed in changeset commit:"02409e9901356e07ef1f4e56c74d1685bc62e0ae".
-
- We're almost there, I still have to make the TopoViewer make the setExtent calls :)
-
- We're almost there, I still have to make the TopoViewer make the setExtent calls :)
-
- Fixed in changeset commit:"500116bfe337760a21a6c34ac16073eba5fefe40".
-
- Dropping the call from QgsVectorLayer::setDataProvider gets me the speed I was trying to obtain. Seconds vs. minutes.
-
- Extent seems to be called at VectorLayer initialization:...
-
- Reopening as it's still slow due to extent query :/
You'd need an few hundred thousand faces topology to tell...
If y... -
- Fixed in changeset commit:"370156148969b5e755f847ebb8c31eb1aad5c0f7".
-
- Reopening again, as the cast to typmod geometry does not provent core from checking again for the type, which makes t...
-
- Reopening again, as the cast to typmod geometry does not provent core from checking again for the type, which makes t...
-
- Reopening again, as the cast to typmod geometry does not provent core from checking again for the type, which makes t...
-
- Reopening again, as the cast to typmod geometry does not provent core from checking again for the type, which makes t...
-
- Fixed in changeset commit:"188b373bad4d18ca92a929f3ec611cba910f09b6".
-
- it looks like I broke the face layers, need to further debug this
-
- it looks like I broke the face layers, need to further debug this
-
- Fixed in changeset commit:"73b498674794be924bb1097c3edc23b966a58d8a".
-
- The Face geometries and Face centroid layers are views, on creation qgis scans them all to find out about their type ...
-
- Fixed in changeset commit:"4c87b0c123371b8a87a975746e8379643da97414".
-
- I made a mistake in calling QgsDataSourceURI.setDataSource from python and passing it 4 arguments instead of 5,
pract... -
- Fixed in changeset commit:"915f5c1a9644252934f0bc294e9c34cf703f8f30".
-
- Pull request here https://github.com/qgis/QGIS/pull/1150
-
- Pull request here https://github.com/qgis/QGIS/pull/1150
-
- Pull request here https://github.com/qgis/QGIS/pull/1150
-
- As a result one can not build an expression from another like it is done in QgsFeatureRequest::QgsFeatureRequest( con...
-
- Fixed in changeset commit:"00f623614a786364cb71232dbbcb3051c0d81581".
-
- Fixed in changeset commit:"417d49701770ab59938c3fcdc9f52d405f65d9ae".
-
-
> Have you tried it on a build that relies on saucy system packages? (Ie not with the ubuntugis packages)
no, I te... -
- Giovanni, seems closing this issue is right thing to do considering I appear to be the only one able to reproduce. Wi...
-
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the builds I use on my three machines with which I can replicate all the tim... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the builds I use on my three machines with which I can replicate all the tim... -
- not a application problem - but also not a redmine problem anymore - because we're using https to login there now.
-
- not a application problem - but also not a redmine problem anymore - because we're using https to login there now.
-
- Fixed in changeset commit:"6dd0cbe5425a3aaa84902cdb9a22ef17d8964cb5".
-
- I can't confirm this is a recent regression it's actually happening in 2.0.1 too!
-
- Related issue... doesn't this mean that any project saved by QGIS-2.0 will have 100% transparency style not honoured ?
-
- I noticed this with face_left, but I guess it also happens with face_right etc..
Also, when loading a TopoViewer, qgi... -
- Martin Dobias wrote:
> Works for me on linux (either case 1 and 2 work as expected)
Hi Martin, it does not happen on... -
- Martin Dobias wrote:
> Works for me on linux (either case 1 and 2 work as expected)
Hi Martin, it does not happen on... -
- Martin Dobias wrote:
> Works for me on linux (either case 1 and 2 work as expected)
Hi Martin, it does not happen on... -
- In the latest master code for qgis server seems that things are ok. I tested on both Linux (ubuntu) and Windows (osge...
-
- In the latest master code for qgis server seems that things are ok. I tested on both Linux (ubuntu) and Windows (osge...
-
- Fixed in changeset commit:"18fd4011677fc4c64e3543d20d7e0bb451bb285a".
-
- Confirmed as a regression since 1.8
-
- Confirmed as a regression since 1.8
-
- pull request merged in commit:3568fe761
-
- As far I can see this is still an issue at least on osgeo4w 64bit
-
- As far I can see this is still an issue at least on osgeo4w 64bit
-
- I suppose this only applies to Qt 4.7 (which OSGeo4W 32bit still uses)
-
- I suppose this only applies to Qt 4.7 (which OSGeo4W 32bit still uses)
-
- I can confirm that this was working as expected in QGIS 1.8 and does not on master.
-
- I can confirm that this was working as expected in QGIS 1.8 and does not on master.
-
- Jürgen Fischer wrote:
> Fixed in changeset commit:"a0fc024e76b9f40cff1bfde76e6dbf8111c7eb3a".
Use the native postgre... -
- Fixed in changeset commit:"a0fc024e76b9f40cff1bfde76e6dbf8111c7eb3a".
-
- Fixed in changeset commit:"7b45b40f96535469e4730713b8f38af6b48996a7".
-
- Looking at the code and the tooltip I concluded it was a miswording of the option.
This pull request corrects it:
ht... -
- Martin Dobias wrote:
> When I convert a layer to offline project, the primary key is preserved and I can keep update ... -
- Martin Dobias wrote:
> When I convert a layer to offline project, the primary key is preserved and I can keep update ... -
- hi, if i add to my project a layer in MSSQL server, and the features have field of type date , qgis views it as QSTR...
-
- fixed in commit:af65a0a2
-
- Perhaps user's home directory is configured to be not on the local disk but on some network resource.
-
-
-
2014-02-07
-
- I confirm this still happens in current master. It's with views having SRID=0 advertised in geometry_columns.
Running... -
- Alvaro, the builds I use on my three machines with which I can replicate all the time are builds offered via the qgis...
-
- Hi Mathieu, I successfully built QGIS master in Ubuntu 13.10 :-)
!Ubuntu1310_Issue9360.jpg!
I use VirtualBox in Wi... -
- I've now reproduced the random std::bad_alloc at startup bug. I think it's unrelated to the
std::bad_alloc on low RA... -
- Is this reproducible in current dev version? That code area has been changed significantly in 2.1 and I'm confident t...
-
- Is this actually a bug (ie string is untranslatable) or it's just missing in a particular translation?
-
- Try un-checking "Discourage labels from covering features" for the _lots_ layer, or for both layers. It is under Vect...
-
- Have you tried to upgrade "Processing" from the plugin installer?
I just tested v.dissolve with a shapefile and it ... -
- There is a "vector map not found" error when i try to execute dissolve tool. It doesn't work with both temporary and ...
-
- I don't think this is a bug - to me it's a feature. Why would you want to disable anti-aliasing when exporting a comp...
-
- I looked into GRASS and SAGA and both have the same problem, which means that in the FOSS GIS world, batch conversion...
-
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- This is a follow up of #9315
Open a fair large vector like http://idena.navarra.es/descargas/CARTO1_Lin_6CNivelD.zip... -
- Salvatore Larosa wrote:
> Hi Matthias,
> I just noticed that with large shapefiles (over ~70k features)
> when turn ... -
- Fixed in changeset commit:"10c15089d1735cec491ee0958b54b3fb0fad230d".
-
- Fixed in changeset commit:"8b8eb562f499c70b7be2001f4aec82b304d4ccfa".
-
07:57 AM Bug report #9030: WMS passwords stored in plaintext even if not chosen to
- When did the change in behaviour occur?
And no, this is not a case where the WMS URL itself contains the password. T... -
- Um, not reproducable in master (but I'm not aware that there was a change in behaviour since 2.0.1)
If you enter the... -
- There is no crash or data corruption, so I'm lowering the priority.
-
- When I convert a layer to offline project, the primary key is preserved and I can keep update attributes.
Maybe a sh... -
07:52 AM Bug report #9350 (Reopened): reprojected postgresql layers are plotted with offset and very slow
- Thank you for the feedback and sorry to reopen this bug.
It might well be that there are some parameters missing for... -
- without those parameters is normal that you get a shift.
-
- without those parameters is normal that you get a shift.
-
02:11 AM Bug report #9350: reprojected postgresql layers are plotted with offset and very slow
- I found the error: The definition of one of my CRSs was incomplete. The Proj4 string QGIS provided for EPSG:3003 was
... -
- About menu/sponsorship:
we already do a redirect so the link
http://qgis.org/en/sponsorship/donors.html
points to
... -
- Agreed is not crucial, but given that it takes so little to fix, and is so bad for our "marketing", why not fixing it...
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- closing for lack of feedback. Reopen of necessary.
-
- Works for me on linux (either case 1 and 2 work as expected)
-
- see also #5239
-
- should be duplicate of #8628
-
- works as expected in qgis 2.0.1
-
- works as expected in qgis 2.0.1
-
05:43 AM Bug report #8977: rulebased styling with a dash in the field name
- Giovanni Manghi wrote:
> There is no crash or data corruption, so I'm lowering the priority.
There is (configuration... -
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority also because there are alternatives in the process...
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- closing for lack of feedback, should be fixed.
-
- closing for lack of feedback, should be fixed.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- Fixed in changeset commit:"5a64215bd2bd6239a868a60c3f5c26ded518c61b".
-
-
- see #8174
-
- Sandro Santilli wrote:
> Is this duplicate of #2921 ?
yes, closed that too. -
- Hi,
I understand the explanation of simply square root not always right to resize a symbol.
But, I guess perhaps th... -
- Yay, thanks.
-
- Just adding filter item &geometry from the builder menu made crash for me.
-
- I can confirm the issue. On my machine the testing table (provided by Martin) doesn't work on latest master while wor...
-
- Salvatore Larosa wrote:
> works fine for me either 2.0.1 or master version.
>
> Please can you provide more info abo... -
- Fixed in changeset commit:"408e2b7a121e241ef859a95929245f13505d7442".
2014-02-06
-
- Fixed in changeset commit:"d0719b012f65fae1e715ff20626e658eb8452167".
-
- Is this duplicate of #2921 ?
-
- Fixed in changeset commit:"caf33b657f6c845779797c86e82fb5d71a28b6ee".
-
- Fixed in changeset commit:"f3166a5897340411738429b78bdb551f1ba28cae".
-
- I wrote a simple html code to display a Map Tip on a vector layer:...
-
12:18 AM Bug report #9501: QGIS crash on specifying filter for WFS layer.
- Indeed it should have been set to "Yes".
I overlooked the option when I made the issue - And now I seem to be unable ... -
- I confirm QGis crash with both queries. This ticket should have *"Causes crash or corruption"* set to "Yes", shouldn'...
-
- @intersects( $geometry, geomFromWKT( 'LINESTRING(709841 6187968,727061 6198617)')) causes a crash aswell@
-
- Running QGIS 2.0.1-Dufour desktop on windows XP 32bit
I'm connected to a WFS server (some topographical data in GML 2... -
- In an atlas composer:
1. Check "Hidden coverage layer"
2. Enable atlas preview
=> the layer is hidden on the main c... -
- Martin Dobias wrote:
> This should have nothing to do with geometry simplification. This is mainly about having those... -
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
-
- I still cannot confirm. Used this testing table and the line shows up in canvas:...
-
- hi if i create a tin on shape of curve line with 3d elevation it crash if i try with TIN interpolation
-
- You can delete the toolbar.
-
- python iface has a method addToolBar, to add a toolbar with buttons.
But there is no way to remove the toolbar.
I've... -
- works fine for me either 2.0.1 or master version.
Please can you provide more info about the problem ?
maybe adding ... -
- Paolo Cavallini wrote:
> Please add a more descriptive title
i want to update the title with something like "wrong l... -
- Please add a more descriptive title
-
- When i make a query with the spatial query plugin (intersection between 2 layers), the selected features correspond t...
-
11:44 AM Bug report #9503 (Closed): Fill patterns are clipped when exporting rotated composer to PDF
- In my composer I have a map with only a polygon shapefile layer. The map is rotated to 290 degrees. The polygon lay...
-
09:03 AM Bug report #9502: Reshape Tool quits working
- Also in QGIS version 2.1.0....
-
- When editing a polygon, the Reshape tool works for a while, about 20 edits, the stops working on that shape. It will ...
-
- Hi,
I took note that a similar issue had already been opened.
Here is a snapshot with and without simplification an... -
05:22 AM Bug report #5520: Wrong boundingbox values in GetCapabilities for empty layers
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- ramon . wrote:
> Still not sure if its the same bug, but tracks.zip file is giving this error on the mint terminal at... -
02:54 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
- Still not sure if its the same bug, but tracks.zip file is giving this error on the mint terminal at home:
ERROR 1: ... -
02:13 AM Bug report #9499 (Closed): path to external-svg-folder or storage of svg
- I tried to assign QGIS the path to my svg (in german: Layereigenschaften - Stil - Symbollayertyp is set to SVG-Markie...
-
- Upstream bug report: https://bugreports.qt-project.org/browse/QTBUG-36675
2014-02-05
-
- Alvaro - you might have run into the issue I describe here : http://nyalldawson.net/2013/04/building-qgis-on-ubuntu-1...
-
- Jürgen Fischer wrote:
> Alvaro Huarte wrote:
> > I am going to request help to qgis dev mailing list.
>
> Try to bui... -
- ramon . wrote:
> A couple of extra bits:
> 1. Alvaro, if you have a 64-bit install the python library is somewhere od... -
- Alvaro Huarte wrote:
> I am going to request help to qgis dev mailing list.
Try to build "packages":http://htmlprevi... -
- A couple of extra bits:
1. Alvaro, if you have a 64-bit install the python library is somewhere odd. Something /usr/l... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the log window doesn't throw any error message.
>
> Yes, please, try on lin... -
12:22 AM Bug report #9462 (Closed): layer.getFeatures on return the first feature
- in version 2.0.1 vector providers do not allow multiples iterators
[[https://issues.qgis.org/projects/quantum-gis/re... -
- I also have a problem with the on-the-fly reprojection, using QGIS 2.0.1 on a Kubuntu 12.04 system. Find attached a s...
-
09:20 PM Bug report #9482: Composer exporting to eps add its own extension .EPS
- I have. File->Export as image-> and select EPS
-
- How are you exporting to EPS? I don't have any choice of EPS export from composer...
-
- Marking as blocker since it's a regression.
In 2.0, the user could do this:
- Empty layer title string, which would ... -
- The fix here appears to be simple: when a layer title type is set to hidden, the vertical spacing value above the (fi...
-
- A regression slipped into QGIS master with regards to composer legend item's vertical spacing of layers set to hidden...
-
04:43 PM Bug report #9497 (Closed): Hide the UUID from the composer items
- Hi !
Some time ago, we introduced UUID for composer items.
Those are useful for plugin since they allow to identify ... -
- Fixed in changeset commit:"22346cd3c7c4c670a26ae1e606f8b0a6d9a0a0a4".
-
02:57 PM Bug report #9460: gdaltools relies on gdalinfo for raster SRS and extent, should use python API
- Merged, thanks Etienne.
-
- Fixed in changeset commit:"58faa5b4ad113860e798f2b5fdeb0741bb864e09".
-
Memory usage doesn't really 'grow' to ~880 MiB; QGIS is simply unable to allocate if it doesn't have that much virt...-
- Yeah, PointOnSurface could be an alternative to centroid - it would be good to try it out and have a comparison!
-
- I was doing a print on an A1 layout for Jakarta using Atlas export as pdf option. I am pleased to say I just tested a...
-
- Yes Martin, I used postgis LINESTRINGM data. In current Master, they are displayed correctly.
However, I had also MU... -
- I cannot replicate with a LINESTRINGM shapefile. Did you use a shapefile or PostGIS or something else? Please attach ...
-
- In QGIS Master I open a QGIS 2.0 project and most of the layers do not draw. They render perfectly in QGIS 2.0 but no...
-
- Seems to be fixed now. (using 5192e8d)
I'll re-open if it happens again. -
- just as a note: on ubuntu you have to install python-qt4-dev package to solve this problem
-
- Hi Etienne,
Don't get me wrong, the current implementation is good for power users, but most users aren't that techni... -
- Etienne Tourigny wrote:
> You should link here the new issues you created (as "Related issues")
They didn't seem per... -
01:18 AM Feature request #7058: Snapping priority - Prioritise vertices over lines
- This method would be really useful for many plugins.
2014-02-04
-
-
- Probably duplicates #7981
-
- This is better done with a download (upload) web application,similar to the plugin one.
Some interesting set:
* http... -
- Taking from duplicate:
This is better done with a download (upload) web application,similar to the plugin one.
Some ... -
- See also #9495
-
- AFAIK this has been implemented. Please reopen if necessary
-
- AFAIK this has been implemented. Please reopen if necessary
-
03:54 PM Bug report #9213: 'bad_alloc' error at QGIS start
- Tests with latest master has shown that QGIS will throw bad_alloc error when there is less than 880 MiB of virtual me...
-
- mathieu rajerison wrote:
> I am under QGIS Dufour and I can not see none of these options.
>
> In layer properties, ... -
- This relates to #9456
-
- I am under QGIS Dufour and I can not see none of these options.
In layer properties, does rendering refer to "Style"... -
- This may be due because "simplification" of geometries is enabled.
You can disable it -> Layer properties -> Renderi... -
- Line offset in symbology is useful when you have a network with several lines superimposing with others.
But it gene... -
- see my implementation here with commit "browser dock: add normal syntax (with wildcards at begin and end) and case in...
-
- Hi,
when I implemented the filter functionality I did things as simple as possible, using QT's QRegexp [1] class wit... -
- There are a number of simple improvements that I believe can be made to the Browser filter function to make it more u...
-
- You should link here the new issues you created (as "Related issues")
-
- To be entirely honest I wasn't really even aware that the Browser had this functionality. Looking at it now it's quit...
-
- +1 for making _Offset from Centroid_ the default. That just makes sense for polygons, -possible even for points-. Thi...
-
- I also find the wording confusing, I would expect "around centroid" place it right on the centroid, which "offset fro...
-
- @martin Ah yes that gives me better output thanks!
-
- > More obviously a bug - the only part of the WMS layer Metadata screen that's populated is the "properties". This co...
-
- Note - also seems like it should be removed from the "Browser" layer-properties too.
-
- Removing is seems like an idea, at least as long as it doesn't mean anything to the user.
Adding a layer-source that ... -
- I have a number of OGC services set up and accessible via the Browser.
If I right-click on the name of a service for... -
- 1) Add this WMTS service:
http://maps.warwickshire.gov.uk/gs/gwc/service/wmts?service=WMTS
2) Connect using the usua... -
- okay Mathieu.
I had checked before posting but searched for "rounded" but not "round" word. So I hadn't seen the prev... -
- Hi Mathieu, this is Mathieu :)
See a recent issue I filed on this: #9479
Maybe this could be closed as duplicate of... -
- If you want some rounded frames in the composer, you have to import an SVG or an image of it.
It would be nice to ap... -
- Just a small update on the above. I think there's both an issue and a feature request at play here :)
The issue: the... -
- See #9481 for details.
-
- Hi !
I frequently encounter the following bug : depending on other layer's visibility, some labels (of polyline laye... -
04:38 AM Bug report #9489 (Closed): Copy/Paste issue with explicit primary keys
- Copy/paste from a shapefile to a Postgis table with explicit primary keys is no longer possible with QGis 2.0
(Explic... -
- The 2.2 announces gradient fills for objects.
The drop shadows can be applied to labels.
They can be useful to enha... -
- In the composer, the edit button is close to the delete button so that it can lead to delete a layer label instead of...
2014-02-03
-
- Related pull was merged:
https://github.com/qgis/QGIS/pull/1125 -
- Related pull was merged:
https://github.com/qgis/QGIS/pull/1125 -
- There is also "offset from centroid" option which does what you would expect - the labels are then positioned so that...
-
- When labelling polygons, using 'around centroid' the label placement uses the bottom left of the label instead of the...
-
- Doesn't QGIS come with GEOS? It could be worth having a try if label placement would look better by using GEOS PointO...
-
- There is something called Distance Transform that computes distance from each point to the border. We could probably ...
-
- When labelling polygons the label placement is often suboptimal. I am attaching a contrived example which illustrates...
-
- Fixed in 78ecef6f2a476043516eede1d3a8504481fc1e22
-
- Fixed in changeset commit:"78ecef6f2a476043516eede1d3a8504481fc1e22".
-
- Fixed in changeset commit:"10947f796c24f3c63c10b714d39dd876a5cce8c9".
-
- Translating help files in GUI is always the most painful part, and I am convinced it
is not the most useful one, as ... -
- with this patch, QGIS will try to see if there are geometric features in the clipboard every time it changes.
So as s... -
- Denis Rouzaud wrote:
> This will output GEOS every time there is a new copy which is not made of WKT strings.
This i... -
- Exporting an image from map composer add its own extension .EPS to the file name. This behaviour is not present for o...
-
- In iterator loop, I call layer.dataProvider().changeAttributeValues({ feature.id() : attrs })
when I comment this lin... -
- I got an error : Error while updating internal statistics
-
- NOTE: backported to 2.0 branch with commit:673406d271fbc54071c3cc8835fb1279e4ebe719 and commit:f8028087ad533307774c7...
-
- NOTE: backported to 2.0 branch with commit:673406d271fbc54071c3cc8835fb1279e4ebe719 and commit:f8028087ad533307774c7...
-
- Fixed in changeset commit:"da4c4292374d049fde2c238a20a0b726ee9cf48d".
-
- Sorry for the noise, the version string is extracted using "postgis_version()", not "postgis_full_version()", so can'...
-
- Like this (will test after lunch):...
-
- Besides, may I suggest to look at the "TOPOLOGY" label in output from postgis_full_version() instead ?
-
- Found the bug, is in the function checking for topology support:
+ QgsPostgresResult result = PQexec( "SELECT cou... -
- Sorry but I cannot confirm the fix. Could be a problem on my side but as of f45e112 I still see the error:...
-
- QGIS is great, and its composer rocks; however, the current frame join style isn't great (see attached map frame), it...
2014-02-02
-
- see https://github.com/qgis/QGIS/pull/1140
the paste menu gets enabled as soon as there is something in the clipboar... -
- I'd vote for removing the add layer dialog, after having added all the missing functions to the browser.
-
- Title says it all. It'd be useful for the qgis.org ubuntugis-based ppa to offer ubuntu saucy qgis master builds as ub...
-
-
- GDAL translate: conversion of ESRI Raster to tiff has a bug
ESRI rasters are viewed by GDAL as a folder with several... -
- Hi !
When you save a composer (as PDF or image...), we could have the composer's name as default filename...
Th... -
- Duplicate of #8298
-
- Duplicate of #8298
-
- Duplicate of #8298
-
- Duplicate of #8298
-
- Duplicate of #8298
-
- it is an "old" and very annoying bug, that should already be fixed in qgsi master. Can you try and report back? thanks
-
- it is an "old" and very annoying bug, that should already be fixed in qgsi master. Can you try and report back? thanks
-
09:49 AM Bug report #9475 (Closed): "Recently used coordinate reference systems" listbox doesn't receive f...
- The Coordinate Reference System Selector has a "Recently used coordinate reference systems" listbox which can be used...
-
- Hi Matthias,
> Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be... -
- Hi Matthias,
> Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be... -
03:06 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
- Thanks you!
-
- Giovanni Manghi wrote:
> are the fixes already committed in master or to test I have to use Matthias branch?
Yes, th... -
- Salvatore Larosa wrote:
> Hi Matthias,
> I just noticed that with large shapefiles (over ~70k features)
> when turn ... -
- Nathan Woodrow wrote:
> I had the idea to allow those buttons to be customized as quick functions via a context menu ...
2014-02-01
-
- Consider I have a vector layer with a polygon in it.
Wanting to modify the shape of the polygon I decide to add a n... -
- Hi Matthias,
I just noticed that with large shapefiles (over ~70k features)
when turn off the edit mode and you choo... -
-
- Working perfectly now! Thanks Evgeniy.
Cheers
-
- Evgeniy Nikulin wrote:
> GeometryCopier fixed
Thanks Evgeniy ! -
- GeometryCopier fixed
-
- Hi Alvaro
Here it crashes immediately (NB vs ddec663. Maybe it's a Mavericks related issue or another Plug-In relate... -
- Hi Rhenriques, I tested successly the "Random Points" plugin (doRandPoints.py).
I created a new point shapefile with... -
10:54 AM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...
- Very odd! The MemoryLayerSaver (at least the most recent versions) uses a QDataStream to write the data. This corre...
-
- Fixed in changeset commit:"9ba28b386ffe182044a991ef5f24054dbb1c4c22".
-
- Fixed in changeset commit:"a9f4596f4d7bf4ae713b8872bafac6f508644e25".
-
- Hi Matthias,
problem still there (qgis master updated this morning with debian-nightly repo). This the stacktrace:
...
2014-01-31
-
- Fixed in changeset commit:"e0a1d096ad659f8e85a90026441a8b5c0c00953b".
-
- I have some early mockups that I did a while ago. I'll see if I can dig them up.
Maybe we need to increase the featu... -
- Do we have any mockups for this?
What would be the difference of this in comparison to the browser? -
- Marking this as a blocker. A crash for a basic thing like this should be considered a serious issue.
Please confirm ... -
- Marking this as a blocker. A crash for a basic thing like this should be considered a serious issue.
Please confirm ... -
- Hi Vincent,
Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be su... -
- This is an issue when you have underlying triggers that will change the table when you save your modifications.
The ... -
- Hi, I added a new issue to GeometryCopier plugin for notify it to author:
https://github.com/yellow-sky/GeometryCopie... -
- Hi Alvaro
So far, in my case, things are behaving normally, after uninstalling the "Geometry copier" plug-in. I'll w... -
- Rhenriques Henriques wrote:
> Hi again
>
> I've isolated the culprit. This slowness is due to the experimental "Geom... -
- Hi,
This was already fixed.
Thanks Larry! -
09:18 AM Feature request #9473 (Closed): Migrate point diplacement style to new labelling engine
- Now the "Point displacement" style doesn't use the new label engine for labelling the diplaced simbol, so the collisi...
-
07:37 AM Bug report #9414: Custom CRS with units=mm stored as units=m
- Leyan Ouyang wrote:
> I made a small pull request allowing to avoid the OGR conversion before storing the CRS. Based ... -
- I made a small pull request allowing to avoid the OGR conversion before storing the CRS. Based on my quick tests, it ...
-
- I guess everything is around NULL handling. On my memory layer working well, NULL are in fact objects <class 'PyQt4.Q...
-
- With memory provider, there is no workaround with varchar.
Pretty serious issue since it ruins the intersest of plug... -
- Same behaviour when using memory data provider. Strangely, when creating memory layer, all goes well, but when loadin...
-
- This feature is present in the Sextante version used by gvSIG and it was important to include it in Processing, since...
-
- On Ubuntu 12.04 with today's Master from ubuntugis unstable it works ok.
-
- Rick click on a group - Remove
Work fine with 2.0.1 -
- his answer:...
-
- Is the geom _MultiPolygon_?
-
- could not join the video, here it is:
http://youtu.be/d06KI0igcP0
Content:
* add a ring to a fresh polygon in shapef... -
- I received a mail from someone having troubles to add ring in polygons on postgis layers.
He tried both 2.0 and maste... -
06:13 AM Bug report #9357: Lots of PostGIS connections with a standalone python script
- I have included two screenshots to help explain the problem I am having. These screenshots were taken at the same poi...
-
- I have included two screenshots to help explain the problem I am having. These screenshots were taken at the same poi...
-
04:59 AM Feature request #4002: Enhancement: Option to display title in layer panel from wfs/wms plugins
- I'm curious about this issue. Displaying the name tag instead of the title tag for wms/wfs layers seems to me as a si...
-
- We are in feature freeze, the pull-request will be merged just after release. I have tested it, and it works fine.
-
- This feature is present in the Sextante version used by gvSIG and it was important to include it in Processing, since...
-
- Hi !
This is probably a duplicate of #7735 -
- Does this issue still exists ?
We don't have this issue on Linux/Ubuntu but there are some path issue on windows. -
- Now in master they're also listed in the context menu.
-
- Have you tested again ?
If yes and that the bug persists, can you give me accessibility to examples ? -
02:49 AM Bug report #9295: GetPrint causes segfault if HTML formatted text is used in the template
- I know that there are workarounds but it's still a serious bug.
This "known limitation" is not really "known" by mos... -
- The known limitation is that QGIS-Server needs a fake X server to render HTML in GetPrint.
We use it in production ... -
- I can't repeat the bug.
Some one to confirm or infirm it ? -
- I can't repeat the bug.
Some one to confirm or infirm it ? -
- A patch has been supplied with a pull-request.
The code change is only 5 lines.
Someone to review ? -
01:57 AM Bug report #9461: Axis order in GML files
- I think setting GML_CONSIDER_EPSG_AS_URN to YES by default would help
-
- See also "[GDAL] GML - Geography Markup Language, section CRS support":http://gdal.org/ogr/drv_gml.html and "[gdal-de...
-
- Hi Arnaud,
Can you try to update the statistics for this layer? (Go to the "Add Spatialite Layer" dialog, connect to...
2014-01-30
-
- Interesting.
I observed a similar behavior on Windows if you put metadata in text areas with new-lines (e.g. in the ... -
- r.report module produces a window with a big r.report written. If we save to file, a file with only "r.report" is pro...
-
- I've sporadically run into this before, but it's always gone away after I've shutdown and come back int the morning.....
-
- Same as #7936
Cannot save style from layer made from csv. -
- Bug still active in January 2014 weekly (v2.1.0-1) x86. Cannot save styles from a csv, gives no error message.
-
08:04 PM Bug report #9466 (Closed): Print composer - missing string for translation
- Second tab in print composer (i.e. Item Properties) is missing for translation.
-
- Hi !
QgsProject's snapSettingsChanged() signal is broken... It's never sent. It seems it must be sent from QgsSnappi... -
- Hi !
This issue seem to have been forgotten, but I find it quite serious (plus probably not too hard to implement).
... -
- Fixed in changeset commit:"e4f410b589c43ce346930fd2523b815741c6257a".
-
- Perfectly valid request.
-
- Nothing to be sorry about. Consistency is good.
-
- Nothing to be sorry about. Consistency is good.
-
08:48 AM Feature request #9464 (Closed): Consistent Terminology and Syntax
- In writing up documentation for a client who will be using QGIS, when adding a new field or column I suggest using th...
-
-
- My propsed fix was based on wrong assumptions, the main reason for the bad performance was not the fix for #9268 but ...
-
- Fixed in changeset commit:"d378f942a50ad25cc24570e125ea3724e09d79d6".
-
- I have created a branch which could potentially fix both issues, but I did not have any time at all to test it.
If s... -
01:29 PM Bug report #9414: Custom CRS with units=mm stored as units=m
- All units reported by cs2cs -lu should be supported in parsing proj.4 strings in GDAL trunk. See gdal ticket:
http:... -
- Leyan Ouyang wrote:
> edit: seems it does not work either.
No success on my side too.
-
- This is a limitation in OGR, not in QGis. When creating a custom CRS, QGis just uses the OGR function OSRImportFromPr...
-
01:06 PM Bug report #5640 (Closed): QGIS says "Spatialite 3.0.1", but Functions that are new in Spatialite...
- In QGIS 2.0, Spatialite version 4 is working as expected.
-
- Fixed in changeset commit:"70c594984f71f997fe80335e4eac45f3f488f30d".
-
- I confirm, It happens with the node tool, and for Postgis (not tested other providers) but for polygons only.
Duplic... -
- if the SRS is specified like this: urn:ogc:def:crs:EPSG:2169 it is OK, if it is specified like this: EPSG:2169, it is...
-
- Axis order in GML files is still an issue.
I am working with GML files having the data in EPSG:2169.
According to th... -
-
- duplicate #9442
-
- I can't move a vertex anymore in a polygon.
the problem seems to be here
https://github.com/qgis/QGIS/blob/master/sr... -
- When I make iterator, I get only one feature while layer.featureCount() return 28
total = layer.featureCount()
reque... -
- Hi Giovanni, yes it works well in the stable version (2.0.1). Labels of features with NULL values in X and Y fields a...
-
05:57 AM Feature request #7878: Windows 8 Location Provider GPS Support
- OK thanks!
I hope that Windows 8 Location Provider GPS will be supported by QGIS in near future. -
- No we are in feature freeze for 2.2 now so it will have to wait until after that.
-
- I understand. But here is an information that Windows 8 Location Provider GPS Support will be available in QGIS 2.2 (...
-
- No this is a new feature and will have to wait until after the feature freeze.
-
- I would like to ask if there are any chances to support Windows Location Provider in QGIS 2.2? While using Centrafuse...
-
- see pull request https://github.com/qgis/QGIS/pull/1129
-
- GdalTools should rely on commandline tools only for complex operations, not basic dataset info.
The SRS and extent q... -
- Moreover, it would be nice to have a general user option to switch on or off maptips..
-
- I also agree that Map Tips should act on all visible layers. There is no point in selecting the layer first, as other...
-
- I had the idea to allow those buttons to be customized as quick functions via a context menu in the tree view. This w...
-
- It would be very useful to add more shortcuts buttons (ex: AND/OR/etc.) in the field calculator.
-
- In an atlas-defined project, a layer that has a rule-based symbology that relies on the $atlasfeatureid will not rend...
-
- If I understand this bug correctly, it's been fixed in master. Are you able to test with a current development versio...
-
- Fixed in changeset commit:"3994c9816a1018d992b0d2308457e7e6c0809586".
-
- Fixed in changeset commit:"78ea81a6bd4342e197f95f099aa14a1104978a55".
-
- I added objectName to all core C++ plugins in commit:0f590db.
Also various QgisApp::get*Menu() (used by changed to a...
2014-01-29
-
- I've tried with NVIDIA proprietary driver, as well as the open source Nouveau driver, and in both cases I can duplica...
-
- Alvaro: that was with yesterdays nightly, so fairly current dev version. In 2.0.1 I get very fleeting white outs - mu...
-
- Mathieu Pellerin - nIRV wrote:
> I've recorded a video of the issue, which hopefully might do a better job than my wo... -
- Ok Mathieu, I'll try, but it will be hard for me, I've never used Linux, much less compiled QGIS in Linux
-
- Alvaro, the log window doesn't throw any error message.
Yes, please, try on linux / ubuntu 13.10, it does seem to be... -
- I am sorry Mathieu, I do not get to reproduce this behavior.
Can you view error messages in log window please ?
I u... -
- Ok Mathieu, thanks, I study it!
-
- I've recorded a video of the issue, which hopefully might do a better job than my words at explaining the problem; it...
-
- Thanks Ramon, I can reproduce this behavior in QGIS 2.0 Dufour and master before simplification was merged.
When use... -
- Steps to reproduce:
1. Open a project that has an atlas setup
2. Open the composer in which you've set up an atlas
3.... -
- OK, I can actually reproduce the issue in QGis 2.0.1, so I guess it is not strictly speaking a regression. However, I...
-
- Yes, while a raster layer is being rendered I can not check in legend (the application is locked), but while a vector...
-
- Does it happens only with vectors?
-
- Hi Leyan, I can reproduce this behavior in QGIS 2.0 Dufour and master before simplification was merged.
When user ch... -
06:21 PM Feature request #8845: PDF output types & placement.
- I found this link that has more info about PDF placement errors in InDesign.
http://indesignsecrets.com/failed-to-op... -
- I have tested the PDF's created by QGIS on a old Macbook Pro in an old copy of InDesign 3 and they work fine. The iss...
-
- I am still having issues with PDF placement. I have also tried the raster PDF output from QGIS, but still get errors ...
-
- The current line offset algorithm used in line symbol layers is prone to extreme jagged spikes and other rendering er...
-
- Seems to no longer be the case.
-
- Thanks Nathan, It was a curious.
Best Regards -
- Like we have in Python. Well layer.getFeatures returns a lazy iterator that only evals when you call next. A bit lik...
-
- In c# we can write a method as...
IEnumerable<QgsFeature> QgsVectorLayer::selectedFeaturesEnum()
{
QgsFeatureRequ... -
- In C++ or Python.
What are you trying to do? -
- Hi, I have a question, it is possible use in QGIS/Qt something similar to IEnumerable/IEnumerator interfaces of c# ?
... -
- Nathan Woodrow wrote:
> Or better yet just use `selectedFeaturesCount()`.
You are right, thanks Nathan -
- Ups...
https://github.com/yellow-sky/GeometryCopier/blob/master/src/geometry_copier.py#L126
https://github.com/yello... -
- Or better yet just use `selectedFeaturesCount()`.
-
- I think that the problem is:
https://github.com/yellow-sky/GeometryCopier/blob/master/src/geometry_copier.py#L109
It... -
- Hi again
I've isolated the culprit. This slowness is due to the experimental "Geometry copier" plug-in by Nikulin Ev... -
- Rhenriques Henriques wrote:
> Hi Alvaro
>
> That example is before or after the code modification? Your selection is... -
-
- Hi again Alvaro
Definitely a plug-in. I've just disabled all and selection is normal. I'm going to isolate the culpr... -
- Rhenriques Henriques wrote:
> Hi Alvaro
>
> That example is before or after the code modification? Your selection is... -
- Try running with @--noplugins@ to check if it is a plugin issue
-
- Hi Alvaro
That example is before or after the code modification? Your selection is indeed quicker. Maybe it's an OS ... -
- Hi Rhenriques, I get "normal" results, I have released a video (~18mb):
http://www.filedropper.com/testissue9348
c... -
- Hi Alvaro
The data that I'm using is restricted. However I've generated a Random 400000 Points layer for the Iberian... -
- Rhenriques Henriques wrote:
> Hi Alvaro
>
> Thank you so much for taking ongoing this annoying issue. I've made the ... -
- Hi Alvaro
Thank you so much for taking ongoing this annoying issue. I've made the modifications to the xxx.h files i... -
- Hi !
There's a rectangle which represents the shadow of the paper in the composer. When moving objects around, they ... -
- Matthias Kuhn wrote:
> I could (partially) revert commit:5c38775 which could probably help here. But this would in tu... -
-
- I think so
-
> But this issue is about other use case.
> I have not closed the issue #9348
the patch proposed has been merged an...-
- Rhenriques Henriques wrote:
> Be careful because this problem is not solved. Selection remains slow as before in the ... -
- Be careful because this problem is not solved. Selection remains slow as before in the latest NB. Even with the modif...
-
- Outch, that was a bad one indeed. Sorry for that.
-
- Fixed in changeset commit:"5f1c8f4980e2c6e78a4a49a3994a46e0da2dc059".
-
-
- Please reopen if I'm wrong:
right now (on Ubuntu, GDAL/OGR 1.10.0) the operation is slow also from the command line.... -
- Please reopen if I'm wrong:
right now (on Ubuntu, GDAL/OGR 1.10.0) the operation is slow also from the command line.... -
- There's also an old ticket #773 for the same thing
-
- Create a unified "Add Data" dialog that can be used for any data source. This will significantly improve user experie...
-
- Matthias Kuhn wrote:
> Is this still an issue?
>
> Looking at my earlier comments, I didn't take care of this one: "... -
- Hi Alexandre, I can confirm the issue, but I'm not sure is a regression. Did it worked ok on previous QGIS releases?
-
- Hi Alexandre, I can confirm the issue, but I'm not sure is a regression. Did it worked ok on previous QGIS releases?
-
- Issued confirmed for shapefiles, PostGIS ok.
-
- Hi, I can reproduce the issue on my machine (7a9e682),
but only using Polygon features with OGR and Spatialite provi... -
- I can't reproduce with today's master on ubuntu
-
- Fixed in changeset commit:"7456eb7924edd0a660ca98b3e6d7517bdce2fea8".
-
- Metadata tables of topology are queried even if topology is not available, resulting in an error.
This is when connec... -
- Confirmed for points and lines and fixed. Identify tool is now using as context 1x1 pixel box reprojected to layer CR...
-
- Fixed in changeset commit:"62075294638e3716c244371d056797efda125905".
-
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
-
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
-
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
-
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
-
- When MapNodeTool is active and user changes the selected nodes, it unnecessarily refresh the map
-
- there is a new plugin which does this: CadInput [0]
as of today, it is available as an experimental plugin.
[0] http... -
- https://github.com/qgis/QGIS/pull/1127
-
-
- Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou...
-
- Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou...
-
- Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou...
-
- > If you would raise the maxfeaturenumber of your WFS to 10000, I think you would be happy with current 'strategy' :-...
-
- On the WFS "New Connection" - create a new option:
"Maximum Features Returned (if known)" (or some better wording).
... -
- Fixed in changeset commit:"7a9e6820043d26579d8a07f1ce0adde841f842e7".
-
2014-01-28
-
12:27 AM Bug report #9448 (Closed): New spatialite layer never completes
- Same as #8340
-
- I try
1. Layer/New spatialite layer
2. Navigate to a directory and name the new layer test
3. Operation never comple... -
-
-
- Mathieu seems to think I can get the error with this data http://www.licadho-cambodia.org/error2.zip.
What I'm seein... -
- When I toggle layers visibility from the Layers window, sometimes there is no effect. The checkbox is toggled, but th...
-
- I also met this issue, very confusing to see random data changed in the table, even if the underlying data is not aff...
-
- Hi Matthias
> Are you saying, that when you edit an attribute in the attribute table, it should not automatically b... -
- I am not sure I understand this report.
Are you saying, that when you edit an attribute in the attribute table, it s... -
- Fixed by leyan in https://github.com/qgis/QGIS/pull/1104
-
- There is no bug but it is quite tricky. Data defined size may be used in two modes as area or diameter. Unfortunately...
-
-
- Can can confirm this also with postgis. If the X and Y values are NULL (Label not fixed), the labels are draw near 0,...
-
- Can can confirm this also with postgis. If the X and Y values are NULL (Label not fixed), the labels are draw near 0,...
-
- to reproduce:
active layer: an editable line layer
enable offset tool
click on a multipolygon feature -
- fixed in #8cf9936d44bd2bbc733f3d6e57456f6ca65bd508
-
- Hi,
Not all QGIS users are also managing the WFS server they are using so they could raise the server side maxFeatur... -
- On second thought, it is not so much a bug in the logic I think, but more that what you want is a different 'refresh ...
-
- if I run QGIS in debug mode here on Linux, and load your wfs and pan the view, I see this message:
src/providers/wfs... -
- Hi Richard - I think you're more referring to what I reported in this ticket - #8871 - which is a different thing. I ...
-
- sorry for the longread...
I wrote a small blog about this 'problem' http://www.qgis.nl/2013/04/29/qgis-en-wfs-cachin... -
- Everybody can not repeat the issue with these steps but one must zoom to correct area before 2) gives any features. T...
-
01:07 AM Bug report #9444: WFS client not requesting new features when not-cached
- We have been experiencing the same issue. Datasets of different sizes and with different feature limits all have this...
-
- Is this still an issue?
Looking at my earlier comments, I didn't take care of this one: "Postgres: Field length and ... -
- Hi,
qgis crashes when trying to create histogram diagram (no matter which variables or how many variables).
No probl... -
- Hi Jeremy,
It would be very helpful if you could attach a stacktrace of your crash and check how the memory consumpt... -
- Hi Jeremy,
It would be very helpful if you could attach a stacktrace of your crash and check how the memory consumpt... -
-
- I have seen this before. OpenJUMP used to do the same. Adding a timer that waits for 0.7 seconds resolved the issue. ...
2014-01-27
-
- Hi Mathieu, to try reproduce the error, please can you send me the situation on the map? (windows size, map center po...
-
- Alvaro, the layer gone missing is definitively linked to on the fly reprojection between ESPG:3148 (meter-based) to E...
-
- Might be a regression.
1) Add http://maps.warwickshire.gov.uk/gs/ows as a WFS service
2) Add "Street Lights" - unche... -
- In windows the snapping to guides is not snapping to the guides.
http://osgeo-org.1560.x6.nabble.com/Guides-and-grid... -
- Is a point grid like in the attached file?
(Yep, I know the red dots are big and glary, but that can be changed) -
-
11:19 AM Bug report #8600: QGIS 2.0 not working with NTLM proxy
- Yes before the switch happened in the plugin manager NTLM worked for downloading plugins. Other core web access funct...
-
- Hi Jeremy,
is this really a regression or it wasn't supported either on older qgis releases?
The blocker tag is res... -
- It seems that editing broke in QGIS master
Testing on
2.1.0+git20140126+55727f7~precise-ubuntugis1
Trying move a ... -
- new part's geometry is invalid -- to be more precise
-
- trying to add a 1 segment line part to a feature in a multiline layer gives "invalid geometry" after right clicking.
-
- When there is only one column in a database table, it is displayed on the canvas, and nothing is shown on the table i...
-
- There are still reasons not to do so:
* Processing is not always 100% stable
* GDALTools shows the gdal command line,... -
- How about porting gdaltools to processing toolbox (those that do not have an equivalent) and removing gdaltool?
-
- oh, right, I had forgot about it :)
-
- gdal2xyz already available in Processing toolbox. It was added about 5-6 month ago
-
- gdal2xyz already available in Processing toolbox. It was added about 5-6 month ago
-
- Antonio Locandro wrote:
> any updates? do you think this could be done for 2.2 or 2.4
it should be relatively easy t... -
- The following certainly happens with WMS, WCS, WMTS. Probably happens with other data providers, but they don't log a...
-
- Using WMS:
1) Connect to : http://maps.warwickshire.gov.uk/gs/ows
2) Add item 15 (z_OS_Raster_basemap)
3) QGIS might ... -
- Might be related to #6941 and/or #9196
-
- Using WMS:
1) Connect to : http://maps.warwickshire.gov.uk/gs/ows
2) Add item 15 (z_OS_Raster_basemap)
3) QGIS might ... -
- I like the "Extent" functionality on the "Save Raster layer as" dialog. Could that not be used/replicated?
That gets... -
- For the extent-based export, there are two options:
1. have just a checkbox ("Export only features visible in map can... -
- For whatever reason, my WMS server isn't responding to queries at all (timeout).
To replicate: Requires Non-functioni... -
- Confirmed as fixed.
-
- Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... -
- Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... -
- Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... -
- Note: Apparently these fields are for user metadata. My question then is - why? They can be easily automatically popu...
-
- QGIS should have an option to simplify map layers when exporting to svg. Otherwise complex map layers result in svg s...
-
03:37 AM Bug report #9415 (Closed): Problem with current Debian build
- Fixed in latest master version.
-
- There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ...
-
- There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ...
-
- There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ...
-
- Fixed in changeset commit:"177e5a195249f0ebae68c7a76acebb0fb95b7d36".
-
- Alvaro Huarte wrote:
> Hi, this patch fix the ellipsoid and units selection in the project properties dialog. The cur... -
- This is the error I get when trying to save my changes:
Could not commit changes to layer sgev... -
- I still have this problem with "merge attributes of selected features".
I'm trying to make it work in a Postgis tabl... -
- I still have this problem with "merge attributes of selected features".
I'm trying to make it work in a Postgis tabl... -
- I can confirm that snapping works (at least on master) also for measuring tools.
-
- I can confirm that snapping works (at least on master) also for measuring tools.
-
- Antonio Locandro wrote:
> Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected m... -
- Antonio Locandro wrote:
> Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected m... -
- Antonio Locandro wrote:
> Any updates on this?
nope. -
> I added a new description/title to this ticket to makes things a little more clear. It seems that overall things a...-
- No idea, sorry - I just noticed that the error is gone when connecting from master
-
- No backport ?
:'(
Any pointer to the fixing commit, in case anyone is willing to backport ? -
- Yes. However, a test revealed that in master the problem does not show off. As no backporting will be done, I think t...
-
- Does the user you connect as have permissions to read topology.layer ?
-
- Clicking on topology.layer of a postgis_topology DB consistently returns
an error. PostGIS 2.1.1. Tested on Debian un... -
- I do not test this case use, but this patch
https://github.com/qgis/QGIS/pull/1114
can fix this issue
Alvaro
-
-
- I would not mind passing this issue to "Feature". And if there is no better solution, we could inform the user that h...
-
- Activating versioning in DB Manager throws an error:
language "SQL" does not exist
QGIS 2.0.1, on Debian and Window... -
- Seems fixed. Please reopen if necessary.
-
- Seems fixed. Please reopen if necessary.
-
- Seems fixed. Please reopen if necessary.
-
- AFAIK, this has been implemented. Reopen if necessary.
-
- AFAIK, this has been implemented. Reopen if necessary.
-
- Then to avoid more confusion I suggest to just remove the whole "Layer source" field.
Currently the is no universal ...
2014-01-26
-
- Hi Alvaro, thanks for looking into this long standing and painful issue.
Does this
#9348
duplicates this ticket?
... -
- Reopened to enable ids validation in new optional parameter:
QgsVectorLayer::setSelectedFeatures( const QgsFeatureId... -
-
- Nathan Woodrow wrote:
> I agree the check is not needed. We have the ids and if they are not in the layer then they j... -
- I agree the check is not needed. We have the ids and if they are not in the layer then they just don't get selected n...
-
- Any selection of features in QGIS calls to 'QgsVectorLayer::setSelectedFeatures' and from this commit (#39fab67e602aa...
-
- Radim Blazek wrote:
> The bug in master (will be 2.1), i.e. crash if format is feature and OTFR is no was fixed by co... -
12:46 AM Bug report #9432 (Closed): Points In Polygons: New column should be integer not real
- Maybe I'm missing something, but if we are doing a count the result will always be a whole number so the data type of...
-
- Jeremy - I am not the developer of this feature. But yes - currently, the tables are all fetched to the client and th...
-
- Does this feature support large relationship tables from a database? I tried to build a relationship between PostgreS...
-
- I'll close this issue as it's implemented in master.
However, the implementation is currently somewhat confusing as ... -
- Isn't this fixed in master?
-
04:40 PM Bug report #9050: Cannot add a scalebar in meters of project is wgs84
- This kind of behaviour is available in other COTS software, I don't know if people actually pay attention that it cou...
-
- The snap settings are taken from digitizing options
-
- @paolo, how do you enable this? I tried measurement yesterday and it didn't snap at all. I was under the impression t...
-
- It's blocker. We can not use the server > 1.8.
-
- Hi !
A google-images search on "north arrows" gives a lot of ideas.
Please add only very simple, clean and pro-loo... -
- I guess adding arrows would mean generating SVG for them right? If someone can point me in the right direction and pr...
-
- I also get a problem with int4 columns from a PostGIS source. Error is "Cannot create field id (int4,int)". PostGIS s...
-
- The new "paste features as new layer" feature should be disabled if the clipboard is empty.
Also see #9083
In addit... -
- I think a few more options should be added apart from what its proposed, currently only zebra option and another I ca...
-
- Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected map in other COTS software,...
-
- Any updates on this?
-
- Yes I think this would be useful
-
- I would think the new UI/UX user list would be able to comment on this topic and reach a resolution, hopefully for 2....
-
- I think this would be an awesome addition, maybe Nyall can look into it
-
- any updates? do you think this could be done for 2.2 or 2.4
-
- Hi, this patch fix the ellipsoid and units selection in the project properties dialog. The current settings are prese...
-
- Rhenriques Henriques wrote:
> Nyall is right! I've only tested in projects with projected units. The settings are not... -
- > Alvaro Huarte wrote:
> > One question about another issue:
> > Why QGIS does not draw current selected features as ... -
- Giovanni Manghi wrote:
> ... I have seen the correct values (the ones defined in the "value" column of the map), but... -
- Alvaro Huarte wrote:
> >
> > I have tested your patched QGIS and unfortunately it is still not working.
>
> Very we... -
- closing for lack of feedback
-
- closing for lack of feedback
-
- I could (partially) revert commit:5c38775 which could probably help here. But this would in turn reintroduce bug #926...
-
- Matthias Kuhn wrote:
> Is it a regression?
it seems faster in qgis 2.0.1 -
- Is it a regression?
-
- dr - wrote:
> Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
confirme... -
- dr - wrote:
> Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
confirme... -
- The original issue described in this ticket seems gone in the latest master.
-
- The original issue described in this ticket seems gone in the latest master.
-
- seems to work as expected on the latest master.
-
- seems to work as expected on the latest master.
-
- Radim Blazek wrote:
> Unfortunately it can also mean that the bug is still there but does not manifest.
I understa... -
- Radim Blazek wrote:
> Unfortunately it can also mean that the bug is still there but does not manifest.
I understa... -
- Alexander Bruy wrote:
> Still cannot confirm. Export takes several seconds.
Hi Alex,
I can confirm the issue at so... -
- seems ok on master. Please reopen if necessary.
-
- seems ok on master. Please reopen if necessary.
-
- I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. -
- I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. -
- I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. -
-
- Mathieu Pellerin - nIRV wrote:
> Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105... -
- Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105ecfa8. Disabling simplify geometr...
-
- Closing for lack of feedback/sample data to replicate.
-
- Closing for lack of feedback/sample data to replicate.
-
> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...-
> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...-
> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...-
- Sandro Eduardo Nobrega wrote:
> If i just add the dfx file as a layer and then save it as shp it doesn't crash...
Th... -
- Sandro Eduardo Nobrega wrote:
> If i just add the dfx file as a layer and then save it as shp it doesn't crash...
Th... -
- Still true?
-
- Still true?
-
-
- Closing for lack of feedback and lack of sample data to allow us replicate the issue. Please reopen if necessary.
-
- Closing for lack of feedback and lack of sample data to allow us replicate the issue. Please reopen if necessary.
-
- Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat... -
- Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat... -
-
-
- Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... -
- Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... -
- Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... -
- Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... -
- Marco Hugentobler wrote:
> This wasn't working in 1.8 too, so shouldn't be a blocker.
> Btw., it obviously is somethi... -
- Marco Hugentobler wrote:
> This wasn't working in 1.8 too, so shouldn't be a blocker.
> Btw., it obviously is somethi... -
- closing for lack of details, impossible to understand precisely what is the issue and how replicate it.
-
- closing for lack of details, impossible to understand precisely what is the issue and how replicate it.
-
-
- closing for lack of feedback.
-
-
- closing for lack of feedback.
-
- The GUI for markers in a marker line has a transparency slider but the setting is not applied to the markers in the p...
-
- Fixed in changeset commit:"3c5c7de3023c9ec2e9daa4d74b4846fd3e35caad".
-
- Done in pull request https://github.com/qgis/QGIS/pull/1113
-
- Hi !
Composer Legends and Composer Scales refer to a particular map.
This map is selected by the user with a drop d... -
- Great, thanks ! I set done to 100% and hope it will be merged soon !
-
- Giovanni Manghi wrote:
> >
> > Hi Giovanni, if I create the spatial index and update the extent from layer properti... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > after making a whatever editing operation the vectors do render cor... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > after making a whatever editing operation the vectors do render cor... -
- Giovanni Manghi wrote:
> after making a whatever editing operation the vectors do render correctly, so maybe after al... -
- Hi, I have tested the data and ArcView 3.1 crash! I edited the code for QGIS does not use the current map extent to f...
-
- after making a whatever editing operation the vectors do render correctly, so maybe after all is a data issue(?). Not...
-
- I just compiled from source the latest code and have issues with the attached vectors (try zoom in).
This does not s... -
- In commit:f4a7fcb I also added rendering of missing SVG symbol, currently question mark ('?'), in case an SVG file do...
-
- Fixed in changeset commit:"55727f755afac80243433141d8ae74bf2b5734db".
-
01:54 AM Bug report #9425: grass_script.bat always fails if USERNAME contains MBCS
- I'm sorry, the report explains 2 bugs.
Former is "Windows batch file which ends LF can't process MBCS". Attached patc... -
- On Windows, if USERNAME contains Multi Byte Character Set, processing with GRASS (grass_script.bat) always fails.
The... -
- please note that the values in the column used for ordering are not (over)written after pressing "save", anyway even ...
-
- Confirmed in master, a huge regression that must be fixed before the new release.
-
- Confirmed in master, a huge regression that must be fixed before the new release.
-
- Confirmed in master, a huge regression that must be fixed before the new release.
-
- Confirmed in master, a huge regression that must be fixed before the new release.
-
- If compiling from source the parameters are ok.
Maybe is something in the master/ubuntugis build, there the paramete... -
- If compiling from source the parameters are ok.
Maybe is something in the master/ubuntugis build, there the paramete... -
-
- Yes you can close it, thanks all. The original issue as well as the related issues brought up in the discussion are a...
-
- Further info: loaded rasters can in general be loaded, whereas those resulting from in-db elaborations (e.g., aspect ...
2014-01-25
-
- I can show rasters, except for those registered out-of-db (-R)
-
- When editing the Attribute table of a vector layer writing the value in a column will automatically update that value...
-
10:53 AM Feature request #9373: Support for UDP connections in GPS Widget
- Dear all:
I've made a PR !#1112 regarding to this issue. I hope that everything is OK, but I have some doubts with t... -
- Reopen if necessary.
-
- Reopen if necessary.
-
- Actually I cannot confirm in master - for me the sorting is case insensitive and respects accented characters (see at...
-
- >
> I have tested your patched QGIS and unfortunately it is still not working.
Very weird! I follow step by step yo... -
> Done:
> http://www.filedropper.com/qgis-osgeo4w-210-i8818-setup-x86
Hi Alvaro, many thanks for your time!
I hav...-
- greatest, latest, and most regressing one ... (assumption, not verified, but made with high experience of the matter)
-
- Sandro, considering QGIS 2.2 is (planned) to be released in less than a month, might simply be better to update to th...
-
- Could this be backported to 2.0 branch too ?
-
-
- Fixed in changeset commit:"781e34a5bc690df4c1868bbc1b35cfdda0eb25da".
-
01:15 AM Bug report #9423: QgsGeometry.asMultiPoint() returns wrong values
- QGIS 2.0.1 also returns correct values. I get wrong results with master version (eaf5725).
-
- Tested with this code:...
-
- If it works fine in the dev version of qgis, then this is considered fixed because there are no backports. Instead th...
-
- If it works fine in the dev version of qgis, then this is considered fixed because there are no backports. Instead th...
2014-01-24
-
- Agreed, no migration should be necessary
-
> I am leaving this open for this last problem, but I am not going to fix that.
I'm personally ok with this. When a...-
- Regarding backward compatibility. This was obviously buggy in 2.0 and I am not convinced that we have to keep backwar...
-
- Vertical and horizontal markers lines fixed in commit:c21973f.
The longest interval is taken as pattern length. Smal... -
- Color/width: removed from QgsLinePatternFillSymbolLayerWidget in commit:95c3c6f because such options (for sub symbols...
-
- This issue has common background with #8974, some problems you may find testing this issue were fixed there.
-
- Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s...
-
- Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s...
-
- Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s...
-
- Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > I don't know, if this PR really fixes the described problem. If I a... -
- Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > I don't know, if this PR really fixes the described problem. If I a... -
- Matthias Kuhn wrote:
> I don't know, if this PR really fixes the described problem. If I am not mistaken, this proble... -
-
- I don't know, if this PR really fixes the described problem. If I am not mistaken, this problem is related to the val...
-
- Fixed in changeset commit:"eaf5725f569fab62a67a51c0b0bddbb6a44797a2".
-
- Note that this is a regression. Version 1.8.0 works fine, showing a single entry with the correct SRID (0) and the co...
-
- Multipolygon PostGIS tables with unknown srid (0) appear twice in the "Add PostGIS Layer" dialog, once with a SRID pr...
-
- The French Guiana RGFG95/UTM22N projection (EPSG:2972) is bad defined. This seems to be corrected under the dev versi...
-
10:40 AM Bug report #9419 (Closed): Jenks natural breaks has a bad interval
- Running Jenks classification on results in the last interval with an erroneous upper bound value. See attached pic. D...
-
- In qgis master there are CRSs (at least the ones I'm used to use, from Portugal and Italy) that are now missing the t...
-
- What is the status of the PR?
By the way: in qgis master the dial control seems gone, and if selecting "slider" then... -
- What is the status of the PR?
By the way: in qgis master the dial control seems gone, and if selecting "slider" then... -
- Gavin Fleming wrote:
> bug appears to be fixed in 2.1.0 Master (though the new north-oriented CRS definitions Tim add... -
- An update.
I decided to take a look at the connections that were being sent to PostGIS while my script was running u... -
- Giovanni Manghi wrote:
> interesting, what others tools (if any) would benefit from this parameter?
Only gdalwarp us... -
- Etienne Tourigny wrote:
> Probably needs an argument like -tap
interesting, what others tools (if any) would benefit... -
- Probably needs an argument like -tap
-
- Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... -
- Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... -
- Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... -
- Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... -
- WFS seems to be fine.
-
- Note: A similar thing also seems to happen with WMS. Rather than zoom to the bounding box of the layer (try "z_OS_Ras...
-
- Thinking about it more, it needs to be able to allow multiple possible exports:
Selected / All
Visible / All
And an... -
- > today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have success...
-
- > today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have success...
-
04:47 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
- Hello,
today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have su... -
- Marisa Silva wrote:
> Yes we have a policy. The 1st machine we did with power user privileges the 2nd we did it in ad... -
- Jonathan Moules wrote:
> I'd suggest therefore that it shouldn't be shown. Instead it should show the server name tha... -
- I'd suggest therefore that it shouldn't be shown. Instead it should show the server name that has been connected to. ...
-
03:41 AM Feature request #8868: Don't show provider specific layer data source string
- The information in the field is actually right - for all data providers it displays the internal resource identifier....
-
- The WMS query shown is wrong on a number of levels:
1) It doesn't start with the URL, but ends with it as a paramete... -
- Hopefully fixed, please test.
There were other skeletons in the closet like misalignement on offset, missing line m... -
- Fixed in changeset commit:"3fd75ac403c65976d75930c575fc5a20eab4f10b".
-
- Fixed in changeset commit:"760529bd7fd1c63ae5cc93ab3fd9392a68e0fda2".
2014-01-23
-
- I am building with master (a30a9dd) and it fails when I use:
//MODIFIED property for variable: WITH_PYSPATIALITE
WIT... -
- Ok, so problem was indeed my very old osgeo4w setup executable. The spatialite node now works when installing qgis ma...
-
- Alexander confirmed via IRC that on his machine, both the 32-bit and 64-bit osgeo4w qgis master packages do not exhib...
-
- Thanks Jürgen!
-
- Fixed in changeset commit:"a78a0035ac397c72cdbf878f69eb0060bd4fed66".
-
- May be 'QScopedPointer::swap' ( http://qt-project.org/doc/qt-5.0/qtcore/qscopedpointer.html#swap ) ?
-
- I can not build QGIS in visual studio when this commit is applied: commit:e8205c98c938b60569c30d5c0bbec3acab1f441a
t... -
08:38 AM Bug report #8068: Wrong font display in qgis server
- Hi,
can we expect this issue to be fixed in version 2.2? It would really be appreciated. We havn't upgraded our produ... -
- aperi2007 - wrote:
> How many pixel is the tiles size ?
>
> The problem you report could be due to video resolution.... -
- aperi2007 - wrote:
> How many pixel is the tiles size ?
>
> The problem you report could be due to video resolution.... -
- In debian rules file, section: install: build
perl -i -pe 's=#!/usr/bin/env python=#!/usr/bin/python2.7=;' $(find de... -
- Yes we have a policy. The 1st machine we did with power user privileges the 2nd we did it in administrator account an...
-
- Marisa Silva wrote:
> Sorry, where can I view that information?
> I've already performed uninstall and install again,... -
- Sorry, where can I view that information?
I've already performed uninstall and install again, also installed in anoth... -
- Have a look at your installation logs.
Might be that the installation was broken before the CRS synchronization at t... -
- Hello,
thanks for the answer. In attach there's an image of the coordinate selector (coordSelector.png) where you can... -
- Hello,
thanks for the answer. In attach there's an image of the coordinate selector (coordSelector.png) where you can... -
- I try to set up a custom CRS with
@+proj=tmerc +lat_0=51.4 +lon_0=7.0 +k=1 +x_0=0 +y_0=0 +ellps=WGS84 +towgs84=0,0,0... -
- I updated the CRS properties management in this pull request, this should solve the issue: https://github.com/qgis/QG...
-
02:11 AM Bug report #9413 (Closed): Misalignment after raster clipping
- After clipping of a raster with a vector mask layer using the "gdalwarp -q -cutline" function, the clipped raster sho...
2014-01-22
-
- An alternative to this (maybe more intuitive) would be to implement a wordwrap() function in the expression builder:
... -
- It would be really useful for label's multiple lines formatting to be able to set a minimum number of characters for ...
-
- Right now, the X and Y position value of an item is a value that reflects the absolute position within the qgis compo...
-
- Hi Andreas
Thank you so much for the reply. The problem happens with or without spatial index. Tested both situation... -
- Does the point shapefile have a spatial index. Can you share the data so we can test the issue?
-
- There is that. But maybe the tool in the Raster Menu was designed that way because of some use case?
Anyway, it's im... -
- Filipe Dias wrote:
> Giovanni Manghi wrote:
> > The different stats are explained because all the pixels that have 0 ... -
- Giovanni Manghi wrote:
> The different stats are explained because all the pixels that have 0 value are evidently cou... -
- The different stats are explained because all the pixels that have 0 value are evidently counted in the stats (that d...
-
- SAGA 2.10/"Clip grid with polygon" produced a raster with the same statistics as the output from "clip raster with ma...
-
- I tried clipping a raster with "Clipper" from the Raster Menu and "Clip with mask layer" from the Processing Toolbox ...
-
- Assuming that you are using the column "Average.Depth" to create the categorized symbology, then the "." in the colum...
-
- Sample data attached.
Interesting about the blank column - thanks for the info, I assumed it was connected to this i... -
- Sample data attached.
Interesting about the blank column - thanks for the info, I assumed it was connected to this i... -
- I cannot confirm the issue (with both a CSV point layer and the derived vorony polygons) in QGIS master. Please attac...
-
- I cannot confirm the issue (with both a CSV point layer and the derived vorony polygons) in QGIS master. Please attac...
-
- If you have evidence that qgis creates bad indexes or that corrupts them, then please file a new ticket.
-
- Source of problem: my meddling with the shapefile had caused a ".qix" file to be created. Overwriting the spoiled fil...
-
- I would be happy to test the data: giovanni DOT manghi AT faunalia DOT pt
-
- Hi all.
I have a problem with a vector shapefile sent to me from the British Oceanography Data Centre (so I assume ... -
- Thanks Jurgen, will do.
-
- Simon Dedman wrote:
> Same for me, 2.0.1 64 bit Win7, also on the master I believe; had this a long while.
>
> [...]... -
- Same for me, 2.0.1 64 bit Win7, also on the master I believe; had this a long while....
-
- If you use the full file path as key, this is what gets stored in the settings, and this does NOT work.
connections\... -
- Changing the way connection are stored in settings requires some thinking, in order to not break things.
Perhaps an... -
- Hi ! Thanks for quick reaction !!
Actually, I sometimes need specifically to have two spatialite databases with the ... -
- Added warning in commit fbdf34c2b26e90f7c6e077eb54be53cae03d100f - and previous connection is preserved.
Setting thi... -
- It seems to me this is by design and would be hard to change. sqlite connections are stored in QGIS2.conf like this,...
-
- Hi !
If you have two spatialite files with the same name but in different folders, you can only connect to one using... -
- Fixed in changeset commit:"9aa4155e36c01e4fb5f851faa44a05c8764c4279".
-
- Steps to reproduce (tested in 06b1fbc):
1) create a new file
2) create a new composer
3) set number of pages to 2
4)... -
- Yes, it happens many times and the timeout option does not seems to have any effect.
-
- Yes, it happens many times and the timeout option does not seems to have any effect.
-
- Yes, it happens many times and the timeout option does not seems to have any effect.
-
- Hi Marisa
As Giovanni, I'm not having any issues with any portuguese CRS with the same version under Windows or MacO... -
- Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... -
- Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... -
- Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... -
- Hello,
I've installed QGIS Dufour 2.0.1 (in a windows 7 professional at 64 bit) with: "QGIS-OSGeo4W-2.0.1-3-Setup-x86... -
- Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue?
-
- Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue?
-
- Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue?
-
-
-
- Hi Nyall, if you are testing a postgis layer, then these error comes from a bug in ST_Simplify function of postgis ( ...
-
- Hi Nyall, the pull #1087 was merged, can you test your issue please ?
-
- the option is much alike the one for lines, that allows not repeat the label of connected lines. In this case would a...
-
- It is sometimes useful to remove duplicate labels from the map. The remaining label can be placed over one of the fea...
- 04:22 AM Feature request #6091 (Closed): Add a "recent used" expressions list in field calculator
- Fixed in changeset commit:"5c1fed5b2eb0f6c4dc30e39abd12f11a750d5f32".
-
- Hi !
I find it unclear for the user that user-installed plugins and built-in plugins are not differentiated at all... -
- Hi !
Currently, to open a database in DBManager, you must first create a connection to it in the Browser.
Why not a... -
- It would be great to able to use the excellent new Field Calculator tool in the Modeler. At the moment only the old F...
-
- Fixed in changeset commit:"12a463d2b06d5f10b94d4143c86465d8c4b0ecad".
-
- Let the Atlas generator respect scale settings defined under "Project
properties" --> "General" --> "Project scales" ... -
- Tim,
How are you exporting the composition? Are you using the built-in pdf export option or printing to a pdf driver...
2014-01-21
-
- Larry,
How'd you go with your fix for the other settings? Do you have a public branch I can test? -
12:51 AM Feature request #9398 (Closed): map overview in composer with different coordinate systems
- In the map composer, if the overview and the principal map use 2 different coordinate systems, the overview rectangle...
-
- I can't replicate this... are you able to re-test and give me steps to reproduce it? Thanks!
-
- Fixed in changeset commit:"2e4fbc21a62129e62b0702f9e87f5dd86809c710".
-
- Fixed in changeset commit:"befe56ff1be31dd1ef522de5d514a393394a951a".
-
- IMO, this needs to be re-opened as follow-up clean ups are needed:
1/ *Saved symbols that relies on line pattern fil... -
- Hi !
The project's CRS seems to be written in two places in a QGIS file : in the <properties>/<SpatialRefSys> block ... -
- Borys Jurgiel wrote:
> Is it the default font in Ubuntu? If so I'd set the bug priority to High.
>
Yes - it's the d... -
- Is it the default font in Ubuntu? If so I'd set the bug priority to High.
Btw. The same problem with DejaVu Sans on ... -
- I confirm problem on my system too.
-
- Here's a strange one... Using Ubuntu, it's impossible to select the "Regular" variant of the "Ubuntu" font in label p...
-
12:11 PM Bug report #8615: Python error on startup (Windows 64-bit)
- Just received the same error on a QGIS 2.0.1 64-bit install on Win8.1
-
- Problem Solved! Today's NB from Larry Shaffer works flawlessly.
Cheers
-
- Problem Solved! Today's NB from Larry Shaffer works flawlessly.
Cheers
-
- I'd classify the current behavior as a serious usability issue. Here is why:
* Most users are happy with the defaul... -
- Whenever I open existing projects containing WFS layers, I often get errors like this in the log, and the layer is ma...
-
- --------- THIS MESSAGE IS OLD AND SORT OF NONSENSE AND YOU CAN SKIP IT TO THE NEXT ONE -----------
Well, this is wha... -
- Well, AFAIK it works already... should it be closed?
Best regards -
- This can be closed. Appears to be working now (master).
-
- See:
https://github.com/qgis/QGIS/pull/1096 -
03:45 AM Bug report #9374: Print Composer - html frame stays empty when re-opening the project
- Good morning,
in attached you'll find a zip with the project, a shp layer and the html file used in the map composer... -
- Can you please share a project which is showing this behaviour?
-
- Hi all,
I've just posted this problem on gis.stackexchange "here":https://gis.stackexchange.com/questions/83522/grad... -
01:45 AM Bug report #9392 (Closed): Ortho Projection produces artifacts
- I`m trying to create a sphere-like view using qgis and the "world from space"-projection http://spatialreference.org/...
2014-01-20
-
- Good morning Giovanni,
I still have the problem with last nightly version form osgeo4w (00c8196) -
-
- IMHO the problem will be apparent with any device: the discontinuity between adjacent tiles will always be visible un...
-
- Yes the border problem seem resolved.
>The problem is, that current implementation is based on tiles (QgsImageFillSy... -
Also available in: Atom