Activity
From 2013-08-01 to 2013-08-30
2013-08-30
-
11:02 PM Bug report #8534 (Closed): Unable to uninstall the Qgis
- Dear Team,
My PC Qgis is not installed properly,so i was trying to uninstall the program but i am getting the followi... -
10:02 PM Bug report #8525: MSSQL spatial layer bug with estimated metadata
- Do you have a geometry_columns table in your database?
-
01:27 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
- Whith update pacman I get the next error:...
-
06:51 AM Bug report #8531: Raster trasparency setting not saved in the project
- I cannot confirm with both Linux and Windows and (as example) the attached 8bit tiff.
-
04:00 AM Bug report #8531: Raster trasparency setting not saved in the project
- No, it doesn't work in the last 3 weeks of the master release.
-
- Yes, it works in 1.8.
-
- I'm working with Qgis 1.9 dev - 8c4c57b (OsGeo4W 30/08/2013).
-
-
- on qgis master? it used to work ok in previous master releases?
-
- I have a project with several 8-bit TIFF.
I set a trasparency (100%) for one value of this TIFF and I save the proje... -
06:00 AM Bug report #8258 (Closed): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
-
- Can you please test with qgis 64bit?
http://trac.osgeo.org/osgeo4w/
thanks! -
- Hi
I'm working with Qgis 1.9 dev - 8c4c57b (OsGeo4W 30/08/2013).
I'm tring to print (as png image) a A0 composer wi...
2013-08-29
-
12:35 AM Bug report #7871 (Closed): The SVG marker window has several bugs related to SVG parameters
-
- Good catch!
Will fix that now. -
- Great works! Thanks, Matthias and Nathan!!
Now the evaluation of the following conditional expression is True.
<pre... -
- This is as fixed as we are going to be able to do....
-
- This is as fixed as we are going to be able to do....
-
01:09 PM Bug report #8438: WMT-S Crashes when loading layer
- I managed to get it to crash with the back buffer disabled.
-
02:28 AM Bug report #8438: WMT-S Crashes when loading layer
- *More info:*
The crash here occurs by using any WMS/WMS-T on my laptop following the below steps:
* add WMS and clos... -
12:19 PM Bug report #8093 (Closed): IGNF:LAMB1, 1C, 2, 2C, 2E, 3, C, 4, 4C error message
- Bug has been fixed with issue #7941: there's a typo in env.bat from Grass package.
-
- I did a pull request [[https://github.com/qgis/Quantum-GIS/pull/838]]
Now createFromProj4 only checks for same parame... -
- I think here is enough a @DROP TABLE schema.tablename@.
it also removes the references to _raster_columns_ table. -
07:27 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
- Fixed the trivial ones in commit:a9c05d7
Remaining problems are:
* Postgres: Field length and precision are not corr... -
- Matthias Kuhn wrote:
> Giovanni Manghi wrote:
> > In SL I get the error also when creating integer fields even when l... -
- Giovanni Manghi wrote:
> In SL I get the error also when creating integer fields even when leaving 0 as width, does t... -
- Hi Matthias
> For now: As long as you don't change them (i.e. leave them set to 0) you should not get any warnings.
... -
- commit:2f2e088 solves this partially
The other half of the problem is, that the [qgis] spatialite provider indicates... -
- Giovanni Manghi wrote:
> For what it can matter I noticed that on a postgis layer there is no error just when adding ... -
- For what it can matter I noticed that on a postgis layer there is no error just when adding "numeric" and "decimal" f...
-
- Fixed in changeset commit:"22eec4afe831f75f50b19e2c8de9082b76fce662".
-
- Offending geometry here:
https://www.dropbox.com/s/nvn2xwe5b4er3xi/crash_win_qgis32.zip
Tested on master.
2013-08-28
-
- I can confirm this crash only seems to happen on layers that span the anti-meridian line. Could it be that the render...
-
- We can just do this:...
-
- You would think so but it's not the case.
We should be able to fix that by overloading the __eq__ method. Hold tight. -
- The evaluation of (None == None) is True. But the evaluation of the following conditional expression is Fals...
-
- Will now be:...
-
02:10 PM Bug report #8524: Raster tiling offset in composer output from zoomed in resampling
- I stand corrected. The offset is not visible in the main map canvas, but it does show up in the composer preview in a...
-
- I repeated printing without the affected layer (sans heat map tif layer), and the tiling offset does not occur. I can...
-
- The composer is creating raster artifacts that appear to be from some form of tiling in both pdf and png outputs. See...
-
- I made a Pull request for this blocker : [[https://github.com/qgis/Quantum-GIS/pull/836]]
-
11:56 AM Bug report #8525 (Closed): MSSQL spatial layer bug with estimated metadata
- It looks like there is a bug when connecting to MSSQL databases to add a spatial layer when using estimated table par...
-
- It seems to be also a problem not related to QGIS/SEXTANTE, in fact I can replicate issues with the enconding just us...
-
06:30 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
- I can't download sample file, mentioned in previous comments, but this issue not reproducible here (Linux, GDAL 1.10....
-
- Giovanni Manghi wrote:
> This seems to be platform dependent, in fact I made a few tests now based on #6299-4 and on... -
- This seems to be platform dependent, in fact I made a few tests now based on #6299-4 and on Windows I can always see ...
-
- Yes, that fixes it.
Does it make sense to leave the option "meters" allowed in a case like this? -
07:43 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
- I can reproduce.
Apparently, when switching to 2154 (Regis initial choice), the canvas units (in project->prop->gene... -
- Hi Vincent,
I tested PR778, but I can still reproduce the behavior Régis described.
# Open attached project(mapunits... -
-
> do rows in attributes table are dissolved too ?
no :( -
-
> do rows in attributes table are dissolved too ?
no :( -
-
> do rows in attributes table are dissolved too ?
no :( -
- Giovanni Manghi wrote:
> I also cannot confirm this, tested with different datasets on both Linux and Windows. Please... -
- Anita Graser wrote:
> It's really odd, because if I run Dissolve directly in the toolbox and select "dissolve all" NO... -
- Pedro Venâncio wrote:
> Hi Giovanni,
>
> Yes, I agree, it really isn't a regression. However, the use of r.quantile ... -
06:00 AM Bug report #6379: HTML output does not work for Processing/GRASS modules
- Hi Giovanni,
Yes, I agree, it really isn't a regression. However, the use of r.quantile with r.recode can lead to er... -
- Pedro Venâncio wrote:
> Hi,
>
> As suspected, we can not directly use the output of r.quantile in r.recode. See this... -
- Fixed in changeset commit:"bc63fcd374f1ad4d707bbe5eadfe59222366d37c".
-
- Good catch! Thank you very much.
The easiest thing is to start with the environment variable QT_GRAPHICSSYSTEM=X11, s... -
- Looks like duplicate of #2218. Please check before submitting new issue.
-
- Looks like duplicate of #2218. Please check before submitting new issue.
-
- Seems duplicates #4011
-
- Seems duplicates #4011
-
- So if I'm not wrong when can close this again... reopen if otherwise.
2013-08-27
-
- (OTF on/off) has been added to the title of the measurement dialog in PR778.
-
- *OGR Provider : DateTime* Blacklisted this datatype for ShapeFile in commit:a8a1090. Please help to extend the list f...
-
- This is related to definitions of field types in the QGIS provider implementation which do not match the field type w...
-
12:57 AM Bug report #8522: QGIS just shift operation, but the scale is changing, this is a bug!
- If I understand, the complaint is:
In the map window, panning the map causes a change in the scale of the map.
If th... -
06:59 PM Bug report #8522 (Closed): QGIS just shift operation, but the scale is changing, this is a bug!
- QGIS just shift operation, but the scale is changing, this is a bug!
-
10:12 PM Bug report #7871: The SVG marker window has several bugs related to SVG parameters
- Hi,
Thank you for working on fixing this bug.
Regarding the preview: I would not change the initial symbol in the p... -
- Before I do a pull request, here is what I have done so far :
- SVG marker fill-color and pen-outline are correctly ... -
- When qgis map drag when very flicker , can optimize the solution under ?
-
- From what Leyan said, it seems that the error occurs when the custom CRS has too few parameters, compared to the foun...
-
- When attempts to delete a raster table the following error raises:...
-
09:11 AM Feature request #8520 (Open): data defined symbol levels
- many styling parameters can be data defined. It would be really useful to be able to data-define symbol levels as wel...
-
07:59 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
- > Launching QGIS is in fact calling qgis.bat (or qgis-dev.bat) which calls o4w.bat then grass\\etc\\env.bat.
o4w.bat ... -
- Launching QGIS is in fact calling qgis.bat (or qgis-dev.bat) which calls o4w.bat then grass\\etc\\env.bat.
o4w.bat s... -
- > env.bat is automatically executed on start
It's time for the stupid question: when you write "on start", you mean ... -
- so I guess we can re-close this one?
-
04:30 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
- Hien TRAN-QUANG wrote:
> Ok, found the problem :
>
> Grass sets wrongly environment variable :
>
> in %OSGEO4W_ROOT... -
- Grass' env.bat is called automaticaly after setting other setenv (python, gdal, and so on) and that typo overwrote th...
-
- Benoit Laurent wrote:
> Does executing the env.bat file after the correction you suggest solve temporarily the proble... -
- Does executing the env.bat file after the correction you suggest solve temporarily the problem ? Is it more complicat...
-
- Ok, found the problem :
Grass sets wrongly environment variable :
in %OSGEO4W_ROOT%\\apps\\grass\\grass-6.4.3\\etc\... -
- Yes. Its content is:
@SET PROJ_LIB=%OSGEO4W_ROOT%\\share\\proj@
It seems ok, doesn't it ? -
- Benoit Laurent wrote:
> @os.getenv("PROJ_LIB")
> 'C:\\\\Program Files\\\\QGIS Weekly2\\\\proj'
> @
>
> That may expl... -
- In my case, PROJ_LIB does not point to .../share/proj but directly to .../proj which does not exist.
@os.getenv("PRO... -
- Does the @PROJ_LIB@ point to @.../share/proj@? That can be checked by running @import os@ and @os.getenv("PROJ_LIB"...
-
- Does the @PROJ_LIB@ point to @.../share/proj@? That can be checked by running @import os@ and @os.getenv("PROJ_LIB"...
-
07:41 AM Bug report #8519 (Closed): "layer stack" option in raster->miscellaneous->merge is badly named
- Problem statement:
The "layer stack" option in raster->miscellaneous->merge should probably have a different name.
... -
- In the OWS Server tab of the project properties one can add an abstract.
If one uses new lines in the input field, Q... -
07:28 AM Bug report #7879: Automatic creation of warped VRT is incompatible with pyramid (overview) supports
- any update?
-
- Bernhard Ströbl wrote:
> _fill spaces_ will be finished today and called _fill gaps_; wait for the next version of th... -
03:38 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
- _fill spaces_ will be finished today and called _fill gaps_; wait for the next version of the plugin :-)
_open hole/r... -
-
> [1] http://osgeo-org.1560.x6.nabble.com/more-advanced-editing-tools-td5019552.html
I get a lot of feedback from ... -
03:45 AM Bug report #4761 (Closed): Distance matrix: k becomes k-1 when working with one layer.
- Fixed in changeset commit:"580b947498c615ab6e740e539ccfa50067baa6c2".
-
- Fixed in changeset commit:"580b947498c615ab6e740e539ccfa50067baa6c2".
-
- Bernhard Ströbl wrote:
> Hi Giovanni,
>
> I just finished work on the _fill ring_ tool in DigitizingTools plugin. Pl...
2013-08-26
-
01:50 PM Bug report #7791: QGIS master crash while printing large format (A1, A0) from map composer
- Tested print with qgis-dev 1.9.0.3, 64 bit OSGeo4W from Jürgen Fischer
Print Raster A1 at 600dpi is ok.
Confirm solut... -
- This issue seems really fixed in the new QGIS 64bit
http://trac.osgeo.org/osgeo4w/
please test and reopen if necess... -
- This issue seems really fixed in the new QGIS 64bit
http://trac.osgeo.org/osgeo4w/
please test and reopen if necess... -
- Bernhard Ströbl wrote:
> That will need C++ skills, won't it? I am afraid I am glad to get my things done in Python :... -
- Nathan Woodrow wrote:
>
> We should just aim to make them core features, ignore the core plugin idea.
That will nee... -
- I would say create a ticket called something like "Advanced editing tools" and create a new ticket for each edit tool...
-
- Giovanni Manghi wrote:
> Nathan Woodrow wrote:
> > Can we reopen this. I think should be a core feature not somethin... -
- Nathan Woodrow wrote:
> Can we reopen this. I think should be a core feature not something we have to get in a plugi... -
- Nathan Woodrow wrote:
> Can we reopen this. I think should be a core feature not something we have to get in a plugi... -
- Can we reopen this. I think should be a core feature not something we have to get in a plugin.
-
- Bernhard Ströbl wrote:
> Giovanni,
>
> please check if the prolong line tool in digitizing tools plugin (experimenta... -
- Bernhard Ströbl wrote:
> Giovanni,
>
> please check if the prolong line tool in digitizing tools plugin (experimenta... -
- Hi Giovanni,
I just finished work on the _fill ring_ tool in DigitizingTools plugin. Please update to version 0.2.1
... -
- I have done some extensive test with the new QGIS 64 bit for Windows.
http://trac.osgeo.org/osgeo4w/
and I was able... -
- I have done some extensive test with the new QGIS 64 bit for Windows.
http://trac.osgeo.org/osgeo4w/
and I was able... -
-
- Yves NEDELEC wrote:
> the problem seems to have been fixed between these versions...
please reopen if necessary. -
- Yves NEDELEC wrote:
> the problem seems to have been fixed between these versions...
please reopen if necessary. -
04:00 AM Bug report #8487: manual CRS being overwritten by QGIS
- For me, the issue is that the proj4 definitions in SRS.db for these South African CRSs are not correct and shouldn't ...
-
- Yes, on my system (Ubuntu 13.04, QGIS Master) if I create a custom CRS, e.g:
+proj=tmerc +lat_0=0 +lon_0=31 +k=1 +x_... -
- Jürgen Fischer wrote:
> What exactly happens?
you create the custom CRS with
+proj=tmerc +lat_0=0 +lon_0=21 +k=... -
02:56 AM Bug report #8487: manual CRS being overwritten by QGIS
- It is due to the changes I made in the custom CRS handling. Previously, it was all manual, then I changed it to make ...
-
- Giovanni Manghi wrote:
> it is a custom crs, I tested and qgis does indeed overwrite the crs string.
What exactly ha... -
- I've been able to solve this bug on my system (Ubuntu 13.04, QGIS master): If I open /usr/share/qgis/reources/srs.db ...
-
- regis Haubourg wrote:
> same bug occurs when trying to export to file and reproject from LAM93 to LAMB2C. So proj4 is... -
- So if the problem is upstream I will close this ticket, please reopen if necessary.
-
- So if the problem is upstream I will close this ticket, please reopen if necessary.
-
03:07 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
- same bug occurs when trying to export to file and reproject from LAM93 to LAMB2C. So proj4 is the problem. ...
-
- Hi, google indicates that the error seems to come from proj4 gdal. Anyone confirms?
2013-08-25
-
- Giovanni,
please check if the prolong line tool in digitizing tools plugin (experimental) solves this issue. -
- Have you tried the latest dev versions because I'm pretty sure you can already do this.
!http://i.imgur.com/V1kDFdc.... -
12:10 AM Feature request #8517: Possibility to use field for auto offset (for use in conjunction with size...
- An example of a traffic volume map in Inro Emme: !http://www.inrosoftware.com/images/emme4/standard_toolbox/bridge_tr...
-
- Especially when trying to view data on roads (such as vehicle counts per hour per segment), it's already very helpful...
-
11:29 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
- I pulled the latest GIT but still got error....
-
04:27 PM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
- I'll try again at my office but I installed tonight at home the version 1.9.0 weekly (n°33 I think it was).
With the ... -
- ... as soon as possible, I just can't do it right now.
Thanks again.
Yves -
- Thank you for you quick answer...I'll write a full list of steps.
Yves -
- I send another view with a right editor window on a created point
-
- Hi,
*) have you tested qgis master?
*) as the description is not very clear, can you supply a list of detailed step... -
- Hi,
My QGis version is 1.8.0
I can populate the_geom field of geometryless records (created by a web application -a w... -
- From the explanations above, there seem to be valid reasons to turn off OTF, but it should only be disabled for speci...
-
02:39 AM Bug report #8514 (Closed): SEXTANTE plugins stopped working
- Following the rename of the plugin, its subplugins stopped working, e.g.:...
2013-08-24
-
01:18 PM Bug report #8440 (Closed): Encoding problems that occur when a shapefile layer is saved as a new ...
- Fixed in changeset commit:"b05abdf81d6a552570f3ecb69fac12698b279b75".
-
- *New description:*
The *.* wildcard it is not available, the user can only look for files of 1 certain type (and ext... -
- when using the batch mode the autofill mode "with parameters values" seems that does not work as expected but just un...
2013-08-23
-
-
- ok, I hadn't read your note-2 above, so crash confirmed here!
-
- Try ensuring that your map canvas size is at least 850x750
-
- I don't see any crash here (debian with latest master), should I follow any particular procedure to get the crash or ...
-
- ANy chance to get this looked at before 2.0 is released. Would be a pity that QGIS is released with WMT-S that crashes.
-
- Salvatore Larosa wrote:
> with 200 tables I don't see this issue, do you think we can close the issue or at least dec... -
- Salvatore Larosa wrote:
> with 200 tables I don't see this issue, do you think we can close the issue or at least dec... -
- with 200 tables I don't see this issue, do you think we can close the issue or at least decrease the priority?
-
- fixed in commit:c9cf74526
-
- fixed in commit:c9cf74526
-
- It should be fixed on master.
-
- Although QGIS works properly with and without "Ignore Shapefile encoding" now, please remember there is one unresolva...
-
05:40 AM Bug report #5181: fTools python error with option k=1 on 'Distance Matrix'
- below pull request should fix it..
https://github.com/qgis/Quantum-GIS/pull/769 -
- below pull request should fix it..
https://github.com/qgis/Quantum-GIS/pull/769 -
04:44 AM Bug report #8506 (Closed): In the Label Section- option Type case - Capitalize first letter don't...
- Ok,
more probably is a question of my windows.
Also I found an easy workaround defining on my dbms a view with case... -
- just tested on qgis master and cannot confirm this issue.
-
- just tested on qgis master and cannot confirm this issue.
-
- seems really duplicate of #7780 please close this.
-
- Jürgen Fischer wrote:
> Is that a custom crs or did you modify srs.db?
it is a custom crs, I tested and qgis does in... -
- Jürgen Fischer wrote:
> Is that a custom crs or did you modify srs.db?
it is a custom crs, I tested and qgis does in... -
- Fixed in changeset commit:"6f574b41aedd9f7d00a9854bdbbd9b5209ef4e40".
-
- Reminder of discussion with Marco H.
It would be good if, for larger QGIS server installations, the nr of layers to ...
2013-08-22
-
01:15 AM Bug report #6892 (Closed): setDirty error when displaying DB Manager previews
- Fixed in changeset commit:"d100628da299ded9edcba4dcd52051deef8fcbcb".
-
- Upgraded to sip 4.15 from Arch and trunk cannot be compiled with this error message....
-
- as repeorted.
In the label properties, when choose to set the "Type case" ,
the option "Capitalize first letters" do... -
04:15 PM Feature request #8505 (Feedback): Add option to suppress feature form for new features to project...
- Currently, this is an app-wide option, but should be pretty straightforward to implement for project and layer proper...
-
- With the attribute table in dual view if I remove some field and
commit the changes (save button or toggle editing a... -
- Is that a custom crs or did you modify srs.db?
-
- Fixed in changeset commit:"aaef9478004e27d3b77c356deca0091bcb86b249".
-
- John Tull wrote:
> Yes, and turning that off in the connection settings "fixes" the query count issue. As I recall, n... -
- Yes, and turning that off in the connection settings "fixes" the query count issue. As I recall, not using the estima...
-
- Are you using the "estimated metadata" option?
-
- For layers added from a postgis database, the query builder does not return the number of rows that a query expressio...
-
- The changes are fine and the patch is applied in master branch. Thanks rldhont for fixing this issue!
-
- Ok, in that case the ticket is assigned to me.
-
06:15 AM Bug report #8473: Cannot rename layers in composer legend
- I am offline until September 3, please ask someone else to apply the patch.
-
- Hi Radim,
I assigne this issue to you for reviewing my patch.
Marco wrote that you did a lot of work on composer leg... -
03:05 AM Feature request #8500 (Open): Add the ability to get the original GetfeatureInfo and GetLegendGra...
- I've originally posted this issue here #8491
When you add a WMS layer in a QGIS project to use it in QGIS server, yo... -
- +1 this bothered me since years. Not a big deal - only annoying. BMP is really the worst choice.
-
- In Project Properties, OWS tab: when adding CRS to the CRS restrictions sometimes I only get empty entries. Try to ad...
-
02:44 AM Bug report #8497 (Closed): python console can't open anymore if special character has been writte...
- yes, you're right, everything's ok.!!!
thanks! -
- Hi Denis,
it looks like you have an old code in your fork, that encoding problem has already been fixed recently
ple...
2013-08-21
-
01:56 AM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
- Hi Wiliam, thanks for updating the archive page.
I have a suggestion to change your http://www.kyngchaos.com/software... -
07:45 PM Bug report #8492 (Closed): OSX - GRASS tools not longer available in Plugin menu
- done.
-
- done.
-
- I did update the archive recently, but it looks like my host lost those changes when they moved my site to new hardwa...
-
- Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h... -
- Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h... -
- Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h... -
- Unfortunately GRASS 6.4.2 isn't longer available for Mac on Kyngchaos.com.
-
05:01 AM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
- QGIS 1.8 requires GRASS 6.4.2. If you want to use GRASS 6.4.3 then you will need the QGIS 2.0 nightly build from http...
-
- If you have an accent (é in my case) present in console_history.txt, the console can't be open and an error occurs at...
-
- It's great having the grids available in the Composer and now in View decorations, but it's still not possible to gen...
-
03:40 PM Feature request #8494 (Open): Georeferencer and rectifier
- *When georeferencing*: Now you see the rasterimage in a separate window but I think it would be better if the rasteri...
-
- Mathew Topper wrote:
> I have the same problem with the debian wheezy Release repository.
>
> I've imported the new ... -
08:39 AM Bug report #8482: Public keys expired for Ubuntu repositories
- I have the same problem with the debian wheezy Release repository.
I've imported the new key, but for some reason th... -
07:15 AM Bug report #8493 (Closed): "Save as Image" defaults to archaic media type
- If I do *File* > *Save as Image*, the default is BMP, an archaic media type that generally should only be used when m...
-
- Jürgen Fischer wrote:
> Jürgen Fischer wrote:
> > Talk is cheap. Fix your translation ;)
>
> @Really delete table/v...
2013-08-20
-
- off road and wrong conclusion, sorry!
-
- I think of having (almost) track out the issue. :-)
I noticed that applying the following patch fix the problem:
<p... -
- I forgot to say....
For me the message is simply "Attribute Error: The attribute could not be added to the layer". -
- it looks like if precision (mPrec) is not set properly when not visible and reverting the commit:69c656e solves the i...
-
01:32 AM Bug report #8490: Index shift in check geometry validity tool
- The problem was identified using mapinfo file. It doesn't show up with ESRI shapefile.
-
- Small issue with the "check geometry validity" tool in QGIS in menu "Vector=> Geometry Tools".
The tool identify geo... -
- System: OSX 10.6.8, QGIS 1.8.0 (with GDAL1.9), GRASS 4.6.3 (with GDAL 1.10).
(Upgraded through clean install from QGI... -
- Jürgen Fischer wrote:
> Talk is cheap. Fix your translation ;)
@Really delete table/view %s?@ is translated as @Eli... -
- Paolo Cavallini wrote:
> Seem a trivial issue to fix.
Talk is cheap. Fix your translation ;) -
- Confirmed on Debian, with a different server
-
- not confirmed here too.
-
- Not confirmed here on linux, I can delete tables without any issue!
-
- Seem a trivial issue to fix....
-
- Marco Hugentobler wrote:
> The small gaps appear because of numerical problems, see geos-devel list (http://lists.osg... -
- Salvatore Larosa wrote:
> better solution, but the fix seems incomplete :-)
Why? QgsMimeDataUtils does the colon es... -
- better solution, but the fix seems incomplete :-)
-
- Fixed in changeset commit:"b9b8a03905e0a0482e05bec99d4f021b1f54644c".
-
- I don't know if we can fix this directly from browser code, but it look like if on Windows the shp path is wrong:
@C... -
- See also http://lists.osgeo.org/pipermail/qgis-developer/2013-August/027876.html
-
- On Windows, not on Linux (apparently).
-
- I have completed my patch and I proposed it through this pull request
https://github.com/qgis/Quantum-GIS/pull/824
2013-08-19
-
04:05 PM Bug report #8482 (Reopened): Public keys expired for Ubuntu repositories
- I'm not sure what was changed behind the scenes, but I'm still getting the same error when following the directions h...
-
-
- The new series of EPSG codes for South Africa (Hartebeesthoek/LO) with +axis=wsu might be correct for land survey dat...
-
- Hi René, sadly I am not a C++ expert :-( so my patch might not be correct.
Anyway, I did try your patch but renaming... -
- Thanks Salvatore for your patch, but it changes the way to manage text for all the layers and not only for raster lay...
-
- duplicate of #8482
-
- duplicate of #8482
-
- GPG error: http://qgis.org raring Release: The following signatures were invalid: KEYEXPIRED 1376750759 KEYEXPIRED 13...
- 08:38 AM Bug report #8445 (Closed): Feature count isn't updated
- Fixed in changeset commit:"5e4a42ebb9423906ba90d6255b8c9d10ce0e5c20".
-
- In the current QGIS server, if one uses a list of "Exclude composers" in the OWS tab, QGIS server lists only the excl...
-
- The PR (20 days ago) has not been accepted nor rejected, is someone taking care of it ?
-
- The workaround that should be implemented #2921-23 does not seems to work.
-
- I tested on another Windows machine and is ok. Still slow on my Linux machine, but not slow as before. So I guess tha...
-
- I tested on another Windows machine and is ok. Still slow on my Linux machine, but not slow as before. So I guess tha...
2013-08-18
-
- Tim told me, that the certificate is available and only needs to be set up.
This is a critical vulnerability and not... -
11:33 PM Bug report #8356: VRT file opens instantly in 1.8, not opened after 10 mins on Master
- Thanks for continuing to look at the problem!
This has now fixed the problem. Vrt files with ovr files now open inst... -
- I found that OVR files is opened neither in GDALOpen nor in GDALRasterIO but in GDALGetOverviewCount so I wrapped tha...
-
- Fixed in changeset commit:"6a1a4be72223df55996bb2fb403c9515c807bc25".
-
- The Ubuntu download directions (https://issues.qgis.org/projects/quantum-gis/wiki/Download) say to use the following ...
-
- Fixed in changeset commit:"6d157123ef91bb46a14207183bb00b193403330c".
-
- I managed to track out the issue, the SLD may be loaded and the crash disappear after commenting out the following li...
-
- Hi Daniel,
load a vector (I tested shapes and postgis) and make any categorized symbology and save it as sld. Then l... -
07:15 AM Bug report #8475: Program crashes when .sld is applied
- As described in http://www.mapserver.org/development/bugs.html :
> The most important thing when reporting a bug is ... -
02:32 PM Bug report #8473: Cannot rename layers in composer legend
- For me, this issue is not limited to raster layers. (Using today's OSGeo4W nightly - code rev 4408a8b.)
In a project... -
- the plugin was removed from qgis.
-
- the plugin was removed from qgis.
-
- the plugin was removed from qgis.
-
- the plugin was completely removed from qgis.
-
- the plugin was completely removed from qgis.
-
- Hi Daniel,
you may be right. If fact if you look for general union/intersection/etc definitions you will see that th... -
- Add a column in a PostGIS or Spatialite vector (or Shapefile, but does not seems to happen always in this case), then...
-
- Every time I try to add a "real" or "double" type of column in a PostGIS layer now QGIS returns
_The attribute could...
2013-08-17
-
- Daniel Vaz wrote:
> Please provide some dataset to reproduce this bug.
>
> Thanks in advance
it crashes using any d... -
- Please provide some dataset to reproduce this bug.
Thanks in advance -
- New:
If you want to create a new layer based on a selection, it is impossible if the selection was spatial as there ... -
- Choose Vector -> Geoprocessing -> Convex Hull -> Create a convex hull based on input field -> Choose any field -> Cli...
-
- Please, see the pull request
https://github.com/qgis/Quantum-GIS/pull/822
2013-08-16
-
> In between these steps, are you *not* presented with a 'define CRS' dialog? It not, you may have your Options -> C...-
- Giovanni Manghi wrote:
>
> Hi Larry, I still confirm the issue. Here the steps
>
> * new project
> * added a base m... -
- Larry Shaffer wrote:
> Hi Giovanni,
>
> I can't replicate issue here, on Mac. Which CRS dialog are you setting the C... -
- Hi Giovanni,
I was thinking, could somebody download the two .tar.gz attached files and using arcgis do the union pr... -
- Hi Daniel,
> Is it the expected behavior if the three geometries are inside the same layer, right?
I don't know i... -
- Ok, I already have been understood it.
Is it the expected behaviour if the three geometries are inside the same laye... -
- Daniel Vaz wrote:
> Please Giovanni, download the .tar.gz files and give it a try.
>
> Turn edit mode on and move th... -
02:36 PM Bug report #8469: TopologyChecker crash
- Perfect! Working smoothly now. Thanks for the quick fix. Cheers
-
- the debug message before the crash is:...
-
05:48 AM Bug report #8475: Program crashes when .sld is applied
- I apologize....the .dmp file is 40+ mb and would not attach
-
- confirmed here...
-
- confirmed here...
-
- I have tried this in both Windows and Ubuntu
Version 1.9.0
After opening a shapefile I wanted to apply a .sld file
In... -
- Of course. It's common problem with a lot of applications. Threading can sometimes take a little bit to get right w...
-
06:16 AM Bug report #8476: QGIS "not responding"
- It makes QGIS seem really really unstable. It threw me for a while; less technical users won't get the distinction be...
-
- This is simply because we don't use threads in a lot of the code so the UI gets blocked while we are waiting on somet...
-
- A common theme I'm noticing is that any time QGIS starts doing something, if I then try and close that dialog, QGIS w...
-
- Tested with 4e69997 just now. This does not fix opening of VRT files. It loads fine if you open the .ovr file directl...
-
- There doesn't seem to be any help for "add Oracle Table" when the "help" button is pressed.
This is weird because Jur... -
06:00 AM Feature request #8045 (Resolved): add unit test for startup options (pluginpath, configpath)
- Fixed. Pull requested : https://github.com/qgis/Quantum-GIS/pull/749
-
- Fixed. Pull requested : https://github.com/qgis/Quantum-GIS/pull/749
-
- Jürgen Fischer wrote:
> apparently I'm still not convinced that any regression how minor and "edgecasey" it might b... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > While I agree that is an edge case I guess that the point here was... -
- Giovanni Manghi wrote:
> While I agree that is an edge case I guess that the point here was that previous qgis releas... -
- Jürgen Fischer wrote:
> I suppose the fieldname should be unique. As such it's an edge case and shouldn't be conside... -
- Hi Jurgen,
> I suppose the fieldname should be unique. As such it's an edge case and shouldn't be considered a bloc... -
- I suppose the fieldname should be unique. As such it's an edge case and shouldn't be considered a blocker.
-
-
- https://github.com/qgis/Quantum-GIS/pull/818
-
- giovanni@sibirica ~ $ qgis
Warning: loading of qt translation failed [/usr/share/qt4/translations/qt_en_US]
QGIS died... -
- Lene Fischer wrote:
> Even if the computer is restarted it doesnet work any longer. No able to perform a warp.
That'... -
- I am not fairly sure but this patch has worked for me (please anyone who knows better the composer code might reviews...
2013-08-15
-
- In QGIS master aka 2.0 is already possible, you can switch the scalebar units between map units, meters and feet.
-
- In QGIS master aka 2.0 is already possible, you can switch the scalebar units between map units, meters and feet.
-
06:56 PM Bug report #8472 (Closed): Scalebar unit selection
- As a cartographer
I would like to select scale bar units independent of base map units
because I need to provide scal... -
- This should really be a blocker as it is a regression and make work difficult.
-
- This should really be a blocker as it is a regression and make work difficult.
-
- This should really be a blocker as it is a regression and make work difficult.
-
- this also applies to the target srs dialog in the Georeferencer
Open georeferencer Settings->Transformation Settings-... -
- duplicate of #8473, closing this just because the other had a more precise description of the issue.
-
- duplicate of #8473, closing this just because the other had a more precise description of the issue.
-
08:19 PM Bug report #8468: Legend in Print Composer - Unable to edit Group- and subgroupe name
- yes it´s the same. Sorry for not finding that #
Regards
Lene -
- Is by any change the same issue described here #8473 ?
-
- Fixed in changeset commit:"4e699971c30f6da4eb7032e9e653271d454784b6".
-
- Confirmed on Linux and it is a regression.
-
- Confirmed on Linux and it is a regression.
-
- Hi Giovanni,
I can't replicate issue here, on Mac. Which CRS dialog are you setting the CRS in? The one that may pop... -
- The second run is on another target file but the same mask. The dialoge is closed. Even if the computer is restarted ...
-
- The second run is with the same mask layer? Without closing first the tool dialog?
-
- The second run is with the same mask layer? Without closing first the tool dialog?
-
- The second run is with the same mask layer? Without closing first the tool dialog?
-
- I see another issue, this time only on Linux. See Attached screenshots.
On Windows if in the composer legend there i... -
- I see another issue, this time only on Linux. See Attached screenshots.
On Windows if in the composer legend there i... -
- I see another issue, this time only on Linux. See Attached screenshots.
On Windows if in the composer legend there i... -
- It seems a regression: in the print composer legend the name of rasters/wms layers cannot be changed. The dialog show...
-
- Please Giovanni, download the .tar.gz files and give it a try.
Turn edit mode on and move the features of results la... -
- Hi Daniel, thanks for the effort.
Are you writing code from scratch or trying to use something already available? Fo... -
- Please, I need some feedback on first results.
Thanks in advance. -
- Please, I need some feedback on first results.
Thanks in advance. -
- Daniel Vaz wrote:
> Maybe it's a local issue like you said. I can't reproduce it here.
>
> Please if you can provide... -
- Maybe it's a local issue like you said. I can't reproduce it here.
Please if you can provide some steps to follow, I... -
- Still not confirmed here on the latest master on both Linux and Windows.
-
- I can confirm that commit:d61cb25 exhibits this problem too.
-
- Just updated on both Linux and Windows and I cannot confirm this issue. It takes around the same amount of time as SL...
-
- Now updated to d61cb25. A little more testing shows the nature of the problem.
The SL driver is taking a very long t... -
-
- Giovanni I thought you have a primary key non sequential only with @NOT NULL@, isn't ?
In my case I have a PK with @... -
- Salvatore Larosa wrote:
> Hi Giovanni, I think this also happens with PostGIS provider, by loading a PostGIS layer fr... -
- Hi Giovanni, I think this also happens with PostGIS provider, by loading a PostGIS layer from "Add PostGIS layer"??
... -
12:56 PM Bug report #8469 (Closed): TopologyChecker crash
- Fixed in changeset commit:"204634240960d3c325166e652870ba7ed95fb348".
-
- This patch has worked for me: https://github.com/qgis/Quantum-GIS/pull/814
-
- I can confirm it here on linux!
-
- I can confirm it here on linux!
-
- I can confirm it here on linux!
-
- I can confirm it here on linux!
-
- Fixed in changeset commit:"74367c5b7f182970c084da56ab728c153b7f5ab6".
-
- Happens with d61cb25 too. It did work once and then it didn't, so it seems to be intermittent.
2013-08-14
-
- Thanks Radim.
I will test once qgis-dev updates (hasn't updated for a few days now). -
- In the print composer, if you change the grid interval for X the Y grid interval on the map changes. If you change th...
-
-
- It does in the latest build
!http://i.imgur.com/CkUgAoZ.png! -
03:42 PM Feature request #8470 (Closed): No position indicator when you add a new point with snapping
- When you edit a line or polygon layer with the function of snapping, QGIS visualizes the possible location (position ...
-
- Hi Giovanni, follow my first results in union features on same layer.
These results show 10 features instead of 11 e... -
- This should be an easy fix. Confirmed on Mac (again) and happens with new Spatialite layers as well (same dialog, it ...
-
- While using the "impressive" TopologyChecker in QGIS 2.0 DEV, QGIS crashed. This happens if we have a raster layer be...
-
- Unable to edit Group or subgroupname in printcomposer.
-
- An excercize with a warp and mask from a vector. Works fine a first run, but second time recieve ar errormessage.
At... -
- Fixed in changeset commit:"58b79108ea91cc6f34e2a71987ea65c254aefe7c".
-
- It seems that there are no certificates available at the server - so no https connection possible currently. A task f...
-
- This isn't a blocker for the release because it's website related and we can change that after release.
-
- Andreas Neumann wrote:
> For me the registration of a new SL db takes not minutes, but 2-5 seconds. But still it is s... -
- For me the registration of a new SL db takes not minutes, but 2-5 seconds. But still it is suboptimal to have seconds...
2013-08-13
-
01:59 AM Bug report #7933: label item rotation in qgis composer should be improved
- This seems to be caused by the same bug as: #8466
-
- When you rotate a shape (like triangle) in composer it size changes, while the size should NOT change.
Looking into ... -
- I think rotation of most composer items are implemented now. Or at least I can rotate a label now via the normal inte...
-
- I think rotation of most composer items are implemented now. Or at least I can rotate a label now via the normal inte...
-
- I think rotation of most composer items are implemented now. Or at least I can rotate a label now via the normal inte...
-
- Works fine for me. However, some of the help content is very outdated. E.g. the help for layer properties talks about...
-
- It seems like in a bout of stupidity, our corporate network has now blocked the download of .exe files so I can't eve...
-
12:21 AM Bug report #6835: Label with "using perimeter" option looses label and do not work as expected
- I'm also missing the "Line direction symbol" for perimeter labels, so I'd welcome threating polygon perimeters fully ...
-
- Now raster names are surrounded by "" when added by double clicking, so the expression works. If they are written by ...
-
- Fixed in changeset commit:"0607202004ae041b60152da98628fd96f41c7c35".
-
- https://github.com/qgis/Quantum-GIS/pull/806
-
- It should be fixed for add feature. I could not reproduce it with split feature tool.
-
- Fixed in changeset commit:"db07f2f90c4872a5e42bebf13d40f37bcde41922".
-
-
- Yep, duplicate
-
- duplicate of #1449 ?
-
- I confirm it's stll not fixed, see #8461
-
- Sandro Santilli wrote:
> I confirm the bug with 1.8.0-Lisboa.
> It's fixed in 1.9.0-alpha as of Aug, 21 2013 (58477fe... -
- Sandro Santilli wrote:
> I confirm the bug with 1.8.0-Lisboa.
> It's fixed in 1.9.0-alpha as of Aug, 21 2013 (58477fe... -
- The rule-based renderer, the data-defined symbology and expressions certainly help to cover these cases. But it is st...
2013-08-12
-
- This one should be fixed 2 weeks ago commit:ba86804
Please test and report back. -
- Probably related to #4476
-
- Duplicates #4586
-
- Duplicates #4586
-
01:22 AM Bug report #8398: Help doesn't open
- It worked !
I installed latest weekly in @C:\\Temp\\QGIS_Weekly@ -
- Jonathan Moules wrote:
> I can't install the master, only the weeklies. I guess I can do that tomorrow as it hasn't b... -
- I can't install the master, only the weeklies. I guess I can do that tomorrow as it hasn't been built yet.
-
- Fixed in changeset commit:"83d15a51ff279e31c81ceb56fcc83a153ef82327".
-
- Enable encryption for any http connection, where the password gets submitted (like hub.qgis.org)
Adding this as a bl... -
- In the Select by Expression the dialog, the expresseion field always get cleared after running a selection.
Is it pos... -
- Fixed in changeset commit:"d517461360f03ae4d2935343aa83d17cec02f01f".
-
02:02 PM Bug report #8463 (Closed): problems with rubberbands2
- Is it possible to restore trasparency of rubberbands for move/rotate merge features and edit labels tools? I don't kn...
-
- when drawing a rubberband (with add feature or split feature tools) if you delete a vertex, the last vertex is not re...
-
- I see Nathan point about wanting the emptied layers in the project. Personally I never used them as "drawing canvasse...
-
- I confirm the bug with 1.8.0-Lisboa.
It's fixed in 1.9.0-alpha as of Aug, 21 2013 (58477fe)
There's no 1.8.1 target t... -
- Enlarging the viewport size retains map scale and exposes a bigger geographical extent while shrinking the viewport s...
-
- Hi, to ask questions please use the users or developers mailing list, the #qgis IRC channel or gis.stackexchange.com
... -
- Hi, to ask questions please use the users or developers mailing list, the #qgis IRC channel or gis.stackexchange.com
... -
10:43 AM Bug report #8460 (Closed): Problem with GPS USB win7 64bits
- Hola, tenemos problemas con un gps con conexión USB al PC, tengo instalado QGIS 1.8 en Windows 7 64 bits, el tema es ...
-
- Lene Fischer wrote:
> This is a mixup of metafors -
> For "normal" users which I have in the classroom all said
> "Cr... -
- This is a mixup of metafors -
For "normal" users - which I have in the classroom all said-
"Create a new layer" means... -
- Giovanni Manghi wrote:
> The layer that the tool creates isn't a new layer, is a copy of the one where the selection ... -
- The layer that the tool creates isn't a new layer, is a copy of the one where the selection is made with a filter app...
-
- The layer that the tool creates isn't a new layer, is a copy of the one where the selection is made with a filter app...
-
- I use Spatial Query
After performing the query the option Create Layer with selection-button.
It works - but the new ... -
08:59 AM Bug report #8459 (Closed): Add Part on NULL geometry
- I have a PostGIS table with some polygons having NULL geometry. The rows are correctly displayed in the attribute tab...
-
- rcline - wrote:
> Given there is a good alternative to get quality output when doing blends, I would not consider the... -
- In that case it's the same as #8369
-
- In that case it's the same as #8369
-
- we can rename/rephrase the ticket anyway as a feature request like "make the FC handle better some cases"
-
- I'm not sure it should be renamed to that as it's not unique to length.
If I try "$x" and "$y" with a polygon they a... -
- Can we change this to something like "add a warning when using the $length function with polygons"?
-
- Can we change this to something like "add a warning when using the $length function with polygons"?
-
- Ah, Ok.
I think outside of the Operator functions, the user likely isn't going to care about the difference between N... -
- We have had this talk before. It sounds great but like you said NULL != 0 or '' so we are not going to treat NULL as...
-
- Also field calculator does the exact same thing, so it's not labelling specific.
Nathan Woodrow wrote:
> $legnth is ... -
- $legnth is returning NULL. String + NULL = NULL.
-
- I have a polygon. If I label it with the following it works fine.
@ 'polygon' || $area@
However, if I change it to ... -
- Daniel Vaz wrote:
> I will work on this bug. (just for avoid double work)
>
> I will take into account your consider... -
- I will work on this bug. (just for avoid double work)
I will take into account your considerations Giovanni.
Thank... -
- it is also necessary to review the resulting attributes -> it would necessary to give a look to all the discussions i...
-
- Union tool from fTools (and also SEXTANTE) produces wrong result. If we look at an accepted definition of "union" (ht...
-
- Fixed in changeset commit:"7b57676f02fefac2aa764528204d5fb09720c57a".
-
- This also happens with Basic statistics tool
-
- This also happens with Basic statistics tool
-
- Fixed in changeset commit:"ec2992e8f9883b3e794c7fe95ce0d6aaa47785ef".
-
- Closing this issue because commit:3e25f11845 "fixes" this tool (it produces now same result as 1.8 and progressbar wo...
-
- Closing this issue because commit:3e25f11845 "fixes" this tool (it produces now same result as 1.8 and progressbar wo...
-
- Matthias Kuhn wrote:
> The AES encrypted password (In the project file) + the encryption password (which will have to... -
- The AES encrypted password (In the project file) + the encryption password (which will have to be given to the users,...
2013-08-11
-
- Concerns C++ and Python.
C++: Implement the iterator and const_iterator things, so we can do e.g.:... -
07:27 PM Bug report #8453 (Closed): QgsExpression::Interval::fromString() doesn't fully support plural for...
- QgsExpression::Interval::fromString() found in src/core/qgsexpression.cpp currently supports localized intervals, but...
-
- The (same?) bug occurs when the repository is deleted.
-
- This bug is related to #8410 but occurs under different conditions in the current daily build (git20130810). It can b...
-
- While editing on qgis master I'm getting a lot of errors of the type
@Transform error caught: forward transform of
... -
-
- Can I get this reopened. Closed the wrong bug by mistake.
-
- Fixed in changeset commit:"df0d690cd08e835cd49e7c6e9ef168cc157e38b8".
-
- Fixed in changeset commit:df0d690cd08e835cd49e7c6e9ef168cc157e38b8
-
- Fixed in changeset commit:df0d690cd08e835cd49e7c6e9ef168cc157e38b8
-
- I have fixed the bug of using the layer name for anything but single symbols. However there is a side effect of not ...
-
- This is because of:
QString text = symbolItem->text();
if ( text.isEmpty() )
{
// Use layer label, used for ... -
- Confirmed on Linux.
This is a regression since 1.8
In the legend item properties the layername is not associated wi... -
- Confirmed on Linux.
This is a regression since 1.8
In the legend item properties the layername is not associated wi... -
- I have a layer which is categorized. In the *layer>legend* there is an empty symbology class - as always.
When I inse... -
- Can we get an update on this Jonathan using the latest master.
-
- I have tested also 1.7.4 and 1.7.0 and it worked as already described, so I guess is unlikely a regression. So I'm no...
-
- Hi Lene, I tested on both Windows and Linux and I confirm that avoid intersection does not work of layers have differ...
-
- Hi Lene, I tested on both Windows and Linux and I confirm that avoid intersection does not work of layers have differ...
-
- Trying to digitize with two - or more - layers. Snapping and Avoid intersection doesn´t work if there is different ...
-
- Would be handy to get rid of but not a blocker IMO.
-
- But I activate and focus by *Move selection to top*
Regards
Lene -
- This is because Windows has a different style for Active with Focus and Active without Focus. If you click in the at...
-
- If I select manually in the attribute window it turns blue as usual. So the difference confuse.
Please see in this ... -
- In your case are (light) grey, as in my case (on Windows). It depends on the desktop theme you are using.
-
- I also does not confirm on Linux.
-
- I also does not confirm on Linux.
-
- Not confirmed here !http://i.imgur.com/F8Pf6SU.png!
-
- WHen a object is selected with ex. *select single feature tool* and I open the attritbute window the selected item is...
-
- Confirmed on Linux. I would expect anyway to have the count updated just after saving edits. Opening the vector prope...
-
- In Layer>Show feature count the numbers of features is shown in the legend.
But after digitizing there is no update o... -
- The format option doesn't work on anything but pure numbers being returned. Once you use || you are returning a strin...
-
- The format option doesn't work on anything but pure numbers being returned. Once you use || you are returning a strin...
-
- I had once reported the same issue here #6981 and it was closed because in the expression builder there are now numbe...
-
- I had once reported the same issue here #6981 and it was closed because in the expression builder there are now numbe...
-
- I´m trying to set a label with the function $area. This works fine. Also with formating ex 1 decimal.
With $area || ... -
- duplicate of #8443
-
- duplicate of #8443
-
- Master ver 31
In Settings>Options>CRS I´ve set up a Use default CRS displayed below, and choosen EPSG:25832 - ETRS8... -
- Hi Lene,
this issue was solves recently, please try with qgis master installed with osgeo4w so you can test the late... -
- Hi Lene,
this issue was solves recently, please try with qgis master installed with osgeo4w so you can test the late... -
- Trying to insert an image (north arrow) in the print composer. Normally a set of icons is shown, but now I get nothin...
-
- Master ver 31
In Settings>Options>CRS I´ve set up a Use default CRS displayed below, and choosen EPSG:25832 - ETRS8... -
10:39 AM Feature request #8439: Scipy and QGIS integration failures
- THank you very much...
-
- Run the tool on a vector with errors, select an error and then ctrl-c
An error has occured while executing Python co... -
- I am fixing #7012 soon so that will fix this also.
-
- This is already possible but due to #7012 it doesn't work correctly when you don't have a prebuilt list.
-
03:23 AM Feature request #8441 (Closed): Add dropdown list (or autocomplete) of previous entries to new fe...
- Hey,
i am digitizing and have to create a great number of new vector features. With each new feature i have to enter... -
- With the new url in #8438-1 I also get the crash.
2013-08-10
-
- pull request to fix this issue: https://github.com/qgis/Quantum-GIS/pull/800
-
- The problems occur only in case that the "Ignore shapefile encoding declaration" option is not checked. I guess that ...
-
- I'm definitely still getting a crash. I'm using qgis ubuntugis nightly builds for precise as well as a built from sou...
-
- tested this
http://data.linz.govt.nz/services;key=b39ccd76408f48d9bcbbcc4817432518/wmts/1.0.0/layer/772/WMTSCapabil... -
- Dear Claudios,
the bug tracker is suited to report issues, not to make questions. Use the users/developers mailing l... -
- Dear Claudios,
the bug tracker is suited to report issues, not to make questions. Use the users/developers mailing l... -
- I installed QGIS 1.8.0 using the stand alone package and i have been having problems installing some plugin. I get th...
-
- Olá George
> I can reproduce your bug with Quantum GIS 1.8 and Postgis 2.0 on Windows and Linux (ubuntu 13.04 and ... -
- Jonathan Moules wrote:
> There are ~14,000 null geometries, but these don't appear to qualify as a "issue".
they ar... -
- Jonathan Moules wrote:
> See attached screenshot, this is indeed a crash. After several minutes of waiting, a little ... -
- Jonathan Moules wrote:
> See attached screenshot, this is indeed a crash. After several minutes of waiting, a little ... -
- Jonathan Moules wrote:
> See attached screenshot, this is indeed a crash. After several minutes of waiting, a little ... -
- Jonathan Moules wrote:
> See attached screenshot, this is indeed a crash. After several minutes of waiting, a little ...
2013-08-09
-
- Here a URL to a public service:
http://data.linz.govt.nz/services;key=<my_key>/wmts/1.0.0/layer/772/WMTSCapabilities... -
- Crashes on both Ubuntu 12.04 and windows 7 running master build (2087de1). I tried giving the app a quick debug but i...
-
03:01 PM Bug report #6642: fTools: the option to load a layer after analyses should be on by default
- Same issue in the option "Layer"/"Save selection as Vector file...".
The option to add the layer to the project is t... -
07:36 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
- Hi Giovanni,
I can reproduce your bug with Quantum GIS 1.8 and Postgis 2.0 on Windows and Linux (ubuntu 13.04 and wi... -
- Hi Giovanni,
I can reproduce your bug with Quantum GIS 1.8 and Postgis 2.0 on Windows and Linux (ubuntu 13.04 and wi... -
- Hi Giovanni,
I can reproduce your bug with Quantum GIS 1.8 and Postgis 2.0 on Windows and Linux (ubuntu 13.04 and wi... -
- See attached screenshot, this is indeed a crash. After several minutes of waiting, a little black box appears in the ...
-
- Apologies I attached the wrong file. :-(
Giovanni Manghi wrote:
> You are right, using the SL vector "processed" as ... -
- is fixed at least in qgis 2.0
-
- is fixed at least in qgis 2.0
-
- implemented in qgis 2.0
-
- implemented in qgis 2.0
-
- implemented in qgis 2.0
-
- implemented in qgis 2.0
-
- duplicate of #3121
-
- duplicate of #3121
-
- This seems to be a Qt thing on some Windows machines. I get it here too.
-
- The graphics card is two "NVIDIA NVS 310".
Driver: NVIDIA Version 311.35
I've not seen this with any other applicati... -
-
- regis Haubourg wrote:
> Anyway, csv and carriage return will always be a mess since there is no CSV norm..
Then I wo... -
- Those with quotes are cells that contain carriage returns it seems.
Carriage returns an csv are really a mess. After... -
02:54 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
- Just used Office 2011. Same problem when saved as .. "csv "
Re-tried with a save as " windows _ csv". This time QGIS ... -
- Arthur Vignacq wrote:
> The weird thing, is that QGIS 1.8, perfectly read this same file with the possible mistake of...
2013-08-08
-
01:54 AM Bug report #8437 (Closed): db manager don't load esri personal geodb to postgis single feature in...
- I'm using the dev version in windows 1.9.0 (1.9.0-Master Revisione codice QGIS d821bcc)
loading a polyline feature fr... -
- Reopened: Still missing translations...
-
- Reopened: Still missing translations...
-
- Fixed in commit:6bbb8dc
Thank you -
- Fixed in commit:6bbb8dc
Thank you -
- Please update your pull request according to the discussion there and squash it down to a commit with the message inc...
-
- GUI labels and group names are untranslatable in file
src/gui/symbology-ng/qgsstylev2managerdialog.cpp
This is a com... -
- The weird thing, is that QGIS 1.8, perfectly read this same file with the possible mistake office mac made.
I'll try... -
- The issue seems to be this one
http://developmentality.wordpress.com/2010/12/06/excel-2008-for-macs-csv-bug/
giovan... -
- regis Haubourg wrote:
> Your field nom as sometime text delimiters, sometimes not. Could you try to export csv with a... -
- Your field nom as sometime text delimiters, sometimes not. Could you try to export csv with another tool and see if i...
-
- please see attached file
-
06:42 PM Bug report #8403 (Closed): Toggling layer visibility to off doesn't work if you highlight a diffe...
- Same results as the other render bug - could just be a plugin from QGIS 1.8 because problem is not showing up in mast...
-
- Looks like it could of been from a plugin on that Windows PC running QGIS 1.8 because the re-render problem is not pr...
-
- Fixed in changeset commit:"d3142f6d88db49f46e2e3fd87dd3a583ed6776b3".
-
- https://github.com/qgis/Quantum-GIS/pull/798
-
- I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers...
-
- I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers...
-
- I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers...
-
- I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers...
-
- I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers...
-
- see also #8430
-
- duplicate of #5546
-
- duplicate of #5546
-
- As a follow on and having discovered #8431 - it turns out that the data is correct after the calculation - QGIS shows...
-
- See attached.
I tried to use QGIS to calculate the areas of things, but as you can see in the dec2 (decimal size 19) ... -
- After you save the values are saved as expected. There was a refreshing issue after saving that was fixed today, see:...
-
- After you save the values are saved as expected. There was a refreshing issue after saving that was fixed today, see:...
-
- If I do a area calculation and have it specified as "whole number (integer)", the output I see in the attribute table...
-
- You are right, using the SL vector "processed" as target layer and "hex_1k" as join layer with the option "keep all t...
-
- You are right, using the SL vector "processed" as target layer and "hex_1k" as join layer with the option "keep all t...
-
- It is supposed to try the join with the shapefile added here? #8433
If yes then I tested on qgis master/osgeo4w and ... -
- in the attached dataset there is only 1 layer. There is also no screenshot with settings used.
-
- See attached for data and screenshot of settings used for "join attributes by location" tool.
It gets to 15% and the... -
- I cannot confirm using for example the SL dataset you added to other tickets today. Tested on qgis master on both Lin...
-
- Salvatore Larosa wrote:
> Which other tools are you refering to ?
I can't remember now, but may be this patch fixed ... -
- Giovanni Manghi wrote:
> I would propose to close this, because the tools works, it is just the table that is not ref... -
- have you tested qgis master?
-
08:54 AM Bug report #8435 (Closed): Spatialite, PostGIS layers with 8-byte primary keys don't display in I...
- Looks like there was an old issue with other layer providers: Issues #6238, #1920, #62, etc. for PostGIS, MSSQL
SQLi... -
- Jonathan Moules wrote:
> Not much I can do about it I'm afraid.
you should test outside your work environment, so ... -
- Giovanni Manghi wrote:
> Jonathan Moules wrote:
> > It's occurring to me that maybe I'm just really /really/ unlucky.... -
- Jonathan Moules wrote:
> It's occurring to me that maybe I'm just really /really/ unlucky. :-)
the source of your pr... -
- Rémi Bovard wrote:
> It worked fine here on W7 latest weekly.
>
> I noticed that the UI freezed at about 35% (step 1... -
- It's occurring to me that maybe I'm just really /really/ unlucky. :-)
I double checked that deleting the non-spatia... -
- It worked fine here on W7 latest weekly.
I noticed that the UI freezed at about 35% (step 1/2) and 10 sec after unfr... -
- Tested both on Linux and Windows and no crash.
-
- See attached. I deleted all the non-spatial data from it and compressed it heavily. These are the two files that brea...
-
- See attached. I deleted all the non-spatial data from it and compressed it heavily. These are the two files that brea...
-
- can you link the dataset for download (ex dropbox)?
-
- Reproduce:
1) Add SpatiaLite layer (polygon layer)
2) Add ShapeFile (polygon)
3) Open Vector->Spatial Query Tool
4) S... -
- Now I see this also on a (clean) Windows/osgeo4w installation on both master and 1.8, while in the standalone 1.8 the...
-
- Now I see this also on a (clean) Windows/osgeo4w installation on both master and 1.8, while in the standalone 1.8 the...
-
- You must try qgis master anyway. Please test it and report back.
-
- You must try qgis master anyway. Please test it and report back.
-
06:25 AM Bug report #8432 (Closed): Copy/Paste from shape to mysql misses attributes (sets to NULL)
- In QGIS 1.7 you can select and copy/paste features to an mysql-db and both geometry and attributes work as expected.
... -
- For reference:
http://msdn.microsoft.com/en-us/library/windows/desktop/dd391569(v=vs.85).aspx
especially:
http://ms... -
- It might not be a issue for a release build because we start them differently.
-
- Thanks Nathan, this does resolve it (I didn't know you could edit pinned properties until now), but it is a workaroun...
-
- When you pin QGIS Windows is pinning the running exe not the batch file that was used to start it. I don't know if th...
-
- Windows 7, x64 - QGIS weekly - a13cdf8
If I pin QGIS to my taskbar, I can't actually run it from there. Whenever I... -
- While testing the transparency/WMS bug, I looked in the logs for the WMS.
For some reason during this period of chang... -
- Jonathan Moules wrote:
> Possibly, but that won't let me test my given URL.
but we will know if is a general issue o... -
- Possibly, but that won't let me test my given URL.
-
- Jonathan Moules wrote:
> My WMS is internal only and cannot be shared. Also my QGIS doesn't have access to internet s... -
- My WMS is internal only and cannot be shared. Also my QGIS doesn't have access to internet so I can't test external o...
-
-
- seems to work fine here, please provide a url.
-
- QGIS weekly a13cdf8 - windows 7 x64
-
- I have a WMS. When I set transparency in QGIS, the layer becomes very ugly - colours become pseudo colours etc. See a...
-
03:50 AM Bug report #6063: ftools "Convex hull(s)": wrong attributes in output
- made 3 quick tests in 1.9 with common attribute as integer, real and text, and all looks correct.
Thanx a lot. -
- Hmm... for me current implementation works fine
-
- Fixed in changeset commit:"16f24112f5dcc71ca2bab76f9bedc6bb7c5fc157".
-
- Pieter Roggemans wrote:
> I simply installed the qgis dev version from OSGeo4W, I didn't do anything to the configura... -
- Yes, probably it is a good thing open a specific ticket about wrong union results and cite this ticket or move a test...
-
- Merged. Thanks, Daniel!
BTW, maybe it is better to close this ticket and open another one about incorrect union resu... -
- QGIS weekly a13cdf8 - windows 7 x64
-
- Every time I change transparency on a WMS layer in QGIS, it re-requests that layer.
If I change it five times without... -
- Seems Simplify feature can't work for polygons with holes, error message is "This feature cannot be simplified. Check...
-
- Fixed in changeset commit:"b88b76b510d6e07cb0f3262bb0407257d8a4417a".
-
- Just tested patch, works fine for fTools, but "Simplify Feature" map tool still don't work.
-
- I was pretty sure to ask for an RGF 93 projection creating the shape file, but must be my mistake.
Just created ano...
2013-08-07
-
- Arthur Vignacq wrote:
> Yes, I think it's the last release as I downloaded it yesterday (Mac osX).
>
> My visual at... -
- Yes, I think it's the last release as I downloaded it yesterday (Mac osX).
My visual attached. -
- Arthur Vignacq wrote:
> Giovanni Manghi wrote:
> > did you choose custom delimiter -> semicolon?
>
> I don't have th... -
- Giovanni Manghi wrote:
> did you choose custom delimiter -> semicolon?
I don't have this option. In custom delimiter... -
- did you choose custom delimiter -> semicolon?
-
- Hello,
I just tried to import a CSV file in QGIS 1.9 master. But even if I select ; as the separator factor, QGIS ju... -
- Arthur Vignacq wrote:
> http://speedy.sh/c3wts/Port-contours.zip
> Base layer attached
the prj of your shape says it... -
- Arthur Vignacq wrote:
> http://speedy.sh/c3wts/Port-contours.zip
> Base layer attached
the prj of your shape says it... -
- please specify your projection settings (CRS + projection on the fly yes-no) and measuring units preferences.
The be... -
- http://speedy.sh/c3wts/Port-contours.zip
Base layer attached
-
- Edit: Buffer polygone created bigger than +100 000 ha2 ... Bigger than France
-
- Arthur Vignacq wrote:
> Details folowing:
> I have a layer with +10 polygonal object (around 1ha). Menu Vector --> Ge... -
- Details folowing:
I have a layer with +10 polygonal object (around 1ha). Menu Vector --> Geotreatment --> Buffer
Sett... -
- please add sample data and detailed steps on how to replicate the issue.
-
- please add sample data and detailed steps on how to replicate the issue.
-
- Hello,
I've just tried a usual option I frequently use in QGIS older version, but with 1.9 master, buffer don't work... -
- Turns out this is different to #8406
Further to that bug report I've expanded the URL but it hasn't fixed the issue.... -
- I'm not sure this should have been closed.
Consider it from a users perspective - They wouldn't expect to add SERVER ... -
- QGIS weekly a13cdf8 - windows 7 x64
See the attached screenshots. When I resize QGIS, or change the window layer (i.... -
- I have a SpatiaLite database. When I try and use field calculator on it absolutely nothing happens. I don't get eithe...
-
- Fixed in changeset commit:"1e28ce5273c658c523805b59bfeb1c41337af68b".
-
- I would have some time to do this, but we would have to discuss it first.
I would prefer Matthias' solution with a si... -
- Denis are you planning on working on this?
-
- Thanks Nathan,
Maybe a more specific string comparison, so it doesn't mask other QColor::setNamedColor warnings/erro... -
- This is fixed now by suppressing the warning for setNamedColor. It's not ideal but having a slow composer when using...
-
- Fixed in changeset commit:"ee268984de32d631ee5cd57dd895dc8d8977000e".
-
- Can't confirm here. Opens the help viewer as expected.
-
- Always the same error with the latest weekly 7748102
-
- I simply installed the qgis dev version from OSGeo4W, I didn't do anything to the configuration. I only found a saga ...
-
Pieter Roggemans wrote:
> Yep, I saw and tried both, but they both gave the same type of error using the most rece...-
- Giovanni Manghi wrote:
> > Yes I have, but I don't see what expression I could use to show : "Only row 1 of layer 2 W... -
- > > Another bug with labels, when using a character ")" to wrap the label, this character disappear from the label ! ...
-
-
> Yes I have, but I don't see what expression I could use to show : "Only row 1 of layer 2 WHEN intersect OBJECT in... -
- I'am using the Corine Land Cover data for a projet. There is around 40 types of land use in this database. In my prin...
-
03:45 AM Bug report #8417: incorrect value loaded from netcdf file with scale factor
- I've uploaded the file to another provider that hosts files for 90 days: https://hotfile.com/dl/238223792/7662375/GLO...
2013-08-06
-
- Sounds good to me. Are you thinking about using two rubberbands with two distinct colors for that, one being always a...
-
- I don't mind that solution if it's easy to do. Sounds like something that would be nice for the normal line tools too.
-
- A solution to a disambiguation would be to have distinct color/width in the rubber band for already drawn line and th...
-
- This is due to the change of behavior of the right-click in digitization. Right-click doesn't add a new node.
-
- Hello Giovanni,
Thanks for the answer. My answers just under.
Giovanni Manghi wrote:
> hi,
>
> >It's my first bug... -
- I'm closing this because it is about several issues, let continue the discussion here anyway, then we can file separa...
-
- I'm closing this because it is about several issues, let continue the discussion here anyway, then we can file separa...
-
- hi,
>It's my first bug report so, I hope not to be too bad at it. I'm using 1.9.0-Master on mac osx.
please file 1 ... -
- Hello everybody,
It's my first bug report so, I hope not to be too bad at it. I'm using 1.9.0-Master on mac osx.
I'... -
12:28 AM Bug report #8410: Changing repository with localized name produces an error
- fixed in Ubuntu too, thanks Borys.
-
06:17 PM Bug report #8192 (Closed): Zoom to Layer zooms to a far too large area
- Fixed in changeset commit:"6149b3a6fa15c0a5cd497c53269bd0f756c837e6".
-
- Fixed in changeset commit:"6149b3a6fa15c0a5cd497c53269bd0f756c837e6".
-
- Oops... thanks!!!
-
- Option is already there
!http://i.imgur.com/kNvdmct.png! -
- Option is already there
!http://i.imgur.com/kNvdmct.png! -
- Most stupid request ever... but for the sake of consistent behaviour it would be better...
-
- Yep, I saw and tried both, but they both gave the same type of error using the most recent qgis 1.9 (see below for th...
-
- Pieter Roggemans wrote:
> Indeed very slow :-(.
in qgis 2.0, with SEXTANTE, you have (fast) alternatives, both SAGA ... -
- Indeed very slow :-(.
-
- Pekka Sarkola wrote:
> So, if slowness is coming from logging of warnings: workaround could be disable logging. Not v... -
- The pull request was merged. Fixed in changeset commit:"a2776da".
-
- The pull request was merged. Fixed in changeset commit:"a2776da"
-
- Bottom line is that, as far as I understand how qgis works, you must file anyway also a feature request ticket becaus...
-
- Oh now I see that you are referring to TTC2770v2_0_1otb.tif, that you haven't attached...
-
- With GDAL 1.10 and a copy if QGIS compiled against GDAL 1.10 (as it is now fpr qgis master on Windows and Ubuntu), th...
-
- Here is pull request https://github.com/qgis/Quantum-GIS/pull/791. Don't commit it directly as we in string freeze no...
-
- related discussions/pages
http://trac.osgeo.org/gdal/wiki/NetCDF_Improvements
http://trac.osgeo.org/gdal/ticket/379... -
- Here is a second link: https://www.wetransfer.com/downloads/5416cedcb421d89bd06815dbd37cbd6020130806154343/96a8c8
-
- I'm uploading it. Here is a first link (but it says it will take 90 minutes to download, so I am looking for another ...
-
- Jan David Bendrien wrote:
> Trying to upload the dataset (200 MB file)
max attachment size is 5mb per file. Link it ... -
- Trying to upload the dataset (200 MB file)
-
- Can you attach the actual dataset?
-
- Can you attach the actual dataset?
-
- I have downloaded a large (200+ MB) netcdf file on sea water velocities (from this dataset: http://www.myocean.eu/web...
-
- Please, could you try with a more updated weekly package or better, if possible, with the latest master ?
2013-08-05
-
11:05 PM Bug report #8411: Creating SVG image icons is slow in Print composer
- So, if slowness is coming from logging of warnings: workaround could be disable logging. Not very nice. Maybe there s...
-
- Ok, I've tracked down the issue, but not sure how to fix it.
Running the following from PyQGIS shell, gives a simila... -
- Larry Shaffer wrote:
> No issue on Mac (10.7.5). May be the QSvgRenderer on Windows (Qt 4.7.1 ?) is having issues wit... -
- No issue on Mac (10.7.5). May be the QSvgRenderer on Windows (Qt 4.7.1 ?) is having issues with the new SVG symbol li...
-
- Confirmed on Windows.
-
- Do you have additionals SVG files other than the ones installed by default? It is just a Windows issue, right?
-
- Do you have additionals SVG files other than the ones installed by default? It is just a Windows issue, right?
-
- Giovanni Manghi wrote:
> used to work as expected in 1.8 ?
with the same steps as the video, the 1.8 has worked. -
- used to work as expected in 1.8 ?
-
- See attached screencast. It seems that in the composer the text/svg annotations are always shown as is they are set t...
-
- subject says it all
-
- Yes, it is probably because of #8068, which I am working on.
-
- See attached images.
But now I realize that may be is just because of #8068 -
10:20 AM Bug report #8406 (Closed): WMTS Connection is not working
- I've closed the ticket
-
- Thanks everybody for your help with this.
Today I (finally) managed to get my QGIS master copy updated. I tried this... -
- Hi,
Testing WMTS with authentification leads to crsh here, if authentification fails. Did someone try it? -
- Jürgen Fischer wrote:
> not reproducable here. Specifying @http://nis.cubewerx.com/cubewerx/cubeserv?CONFIG=OIM_MB_-... -
- Jonathan Moules wrote:
> #8401 - same thing? I've not tried with that WMTS (my QGIS can't access the internet) but QG... -
- #8401 - same thing? I've not tried with that WMTS (my QGIS can't access the internet) but QGIS fails for me on my int...
-
-
- I can confirm the issue also on Linux.
If just a straight line (with just two nodes) is drawn then qgis returns
"An... -
- I can confirm the issue also on Linux.
If just a straight line (with just two nodes) is drawn then qgis returns
"An... -
- I can confirm the issue also on Linux.
If just a straight line (with just two nodes) is drawn then qgis returns
"An... -
-
08:41 AM Bug report #8404: No public key available for Ubuntu repository
- My mistake - that was the issue.
I just wasn't clear as to the necessity of adding that public key...the instruction... -
- Confirmed here...
-
-
> The failure is the dialog specific help buttons. So "Add Oracle Tables" -> Help fails. "Add Layers from a Server"... -
- Giovanni Manghi wrote:
> Jonathan Moules wrote:
> > Does it require internet access to work? My QGIS doesn't have int... -
- The WMS is on the internal corporate Network so I can't share it.
Can you not see what the problem is from the dump ...
2013-08-04
-
- I create new print composer, then add Image. When I open "Search directories" to select SVG image, QGIS just start to...
-
- I was able to replicate the bug on both Debian and Win7.
The fix is tested on those OS-es, I hope it works on all ot... -
- Fixed in changeset commit:"018e95845f80fa58b53ec213201dc00454f22aa3".
-
- In localized QGIS repository names are also localized.
See screenshot: http://gis-lab.info/images/screenshots/201308... -
- Think I've finally sorted this one out - pull request #789 fixes it.
It's caused by the filter returning records wi... -
- Ok, I've figured this one out. It's caused when a filter is applied to a table which returns records with NULL geomet...
2013-08-03
-
- marisn - wrote:
> It's still an issue with 1.9.0-Master (tested with QGIS code revision e3b8b41)
have you tried chan... -
09:57 PM Feature request #6441: Opening project with unavailable WMS layers takes too long
- It's still an issue with 1.9.0-Master (tested with QGIS code revision e3b8b41)
-
- When QGIS identify tool is in "open form for single feature" mode used for non-editable layer, it's not possible to c...
-
- Issue is still present in 1.9.0-master (e3b8b41) still it has changed a bit as now digized line in the new project is...
-
- OGR part of issue reported upstream: http://trac.osgeo.org/gdal/ticket/5132
-
- Do you have a @spatial_ref_sys@ table in your database. The MS SQL provider will look in there for projections.
-
- "already" in the title is a typo. It should be "always".
pull request to fix this issue: https://github.com/qgis/Qua... -
- Some GdalTools (e.g. translation, warp) generate only GeoTIFF files, because the "-of" option is always set to "GTiff...
-
- Is this now covered with the data defined symbols?
-
- Fixed in changeset commit:"e76fc956f6e15ad64cc409b2c5f1132bf6d956cd".
-
- Could you attach a sample set because I can't reproduce it with my data.
-
- I don't see the memory issue on windows but when I do zoom in I see
@QPainter::end: Painter not active, aborted
QPai... -
- I can't confirm here too. Opens http://docs.qgis.org/2.0/html/en/docs/user_manual/ for me.
-
- did you added the key?
gpg --keyserver keyserver.ubuntu.com --recv 997D3880
gpg --export --armor 997D3880 | sudo ap... -
- did you added the key?
gpg --keyserver keyserver.ubuntu.com --recv 997D3880
gpg --export --armor 997D3880 | sudo ap... -
- Cannot confirm on master on both Linux and Windows. Please try qgis master and report back.
-
- Cannot confirm on master on both Linux and Windows. Please try qgis master and report back.
-
- I cannot confirm on the latest master on Windows and Linux. Please install qgis master, test and report back.
-
- it works fine here too.
2013-08-02
-
- Can not reproduce this on Mac 10.7.5 using latest master.
-
- I noticed that layers don't actually turn off in the map canvas if you try to toggle the visibility to off after high...
-
- not reproducable here. Specifying @http://nis.cubewerx.com/cubewerx/cubeserv?CONFIG=OIM_MB_-_Orthophoto-WMTS&SERVICE...
-
- I have not been able to get a WMTS server to work with either the stable version of QGIS 1.8.0 or the current develop...
-
- See video: http://lrssvt.ns0.it/img/refreshAttribute.ogv
(if the above link doesn't work: https://www.dropbox.com/s/... -
- All,
I get this error when updating in Ubuntu:
W: GPG error: http://qgis.org precise Release: The following signatu... -
- Thanks Matthias
-
- Fixed in changeset commit:"a05324cd9cc04b72e2b7be51b2be1f78e3bd673d".
-
- I've been playing with it more and notice that it doesn't redraw when selecting a point layer.
It only seems to affe... -
- I'm using QGIS 1.8 from the OSGeo4W installer on Windows 7.
Everytime I highlight or select a layer in the layer lis... -
- try also disabling all the plugins and try again.
-
- also not confirmed here on both linux and Windows, please share the WMS url.
-
- Would you be able to share the layer you experience problems with?
-
- After further experimentation it seems to only fail with one particular layer (it just happened to be the only layer ...
-
- No crashes here by following the above steps. (works fine even on WindowsXP)
-
- A repeatable QGIS crash. Windows; weekly a13cdf8
- Add WMS layer.
- Connect
- Select layer
- Add
- Close dialog
- Do... -
- Jonathan Moules wrote:
> Does it require internet access to work? My QGIS doesn't have internet access.
"help conten... -
- Does it require internet access to work? My QGIS doesn't have internet access.
-
- not reproduced here, windows 7 64 bit.
but I get a error message in qgis.org site, the url seems deprecated. -
- I'm using Windows 7, 64bit. It's a new install on a new machine that hasn't had QGIS installed on it before.
-
- Not confirmed here, I also tested it on Windows XP (e3b8b41) and it works.
-
- If this is confirmed, it's a blocker
-
- This seems like quite a critical issue.
Pressing any of the "help" buttons doesn't open any help. I get a log messag... -
- Fixed in changeset commit:"3644402bc770821442f84054e0e21367d279aad9".
-
- confirmed here, first attempt to set IGNF:LAMB93 OK, second attempt with LAMB2C throws same exception..
we have a bl... -
- It means that Even was right, the VSI cache has to be disabled also before each read data call, GDAL does not keep th...
-
- QGIS can't seem to access my WMTS (GeoServer 2.3.4). I can see it has made the request in the access logs, and the sa...
-
- My log has regular entries for:
"Could not resolve property : pattern4600" - level 1 - under the "qt" tab.
I don't k... -
- Fixed in changeset commit:"d1de07a270635dbd30befc4f7c9a68e2cd74497b".
-
- For users it is not obvious that the "Add WMS layer" also serves to add a "WMTS" layer.
I would therefore suggest to...
2013-08-01
-
04:31 PM Feature request #7510: NULL string should be valid in label expressions
- Perhaps we need some prominent documentation on NULL values...
-
- Perhaps we need some prominent documentation on NULL values...
-
- just to be more clear, I'm referring to the split feature tool in the advanced editing toolbar.
Making some other tes... -
- Hi averyone,
in the current master on win, split feature is not working (no split is performed, and the message "an e... -
06:31 AM Bug report #8178: Shifted raster: origin in qgis different than that reported by gdalinfo
- Giovanni Manghi wrote:
> alobo - wrote:
> > Yes, because the raster layer is also missing the crs info. The vector
> ... -
- alobo - wrote:
> Yes, because the raster layer is also missing the crs info. The vector
> layer is derived by samplin... -
- Giovanni Manghi wrote:
> > But then please note that a significant part of the work with Sextante aiming to run R & ... -
- Yes, because the raster layer is also missing the crs info. The vector
layer is derived by sampling the raster layer,... -
05:29 AM Feature request #8387: Warn users when saving projects that contain memory/scratch layers
- @Nathan, don't you think that the "average user" can be confused by seeing that a memory layer is saved even it it do...
-
- @Alessandro you missed my point. I still want those layers there as empty when I open the project next time. I don't...
-
- Agreed, if the memory layers are persistent they can be saved in the TOC, if not I don't see any good reason to save ...
-
- yes, except if memory layer saver plugin is loaded...
-
- I like having memory layers saved in the TOC. I have some project which have construction layers which I use for dra...
-
- @Giovanni: yes, AFAIK memory layers are not persistent, they shouldn't be saved in the project's TOC.
-
- so seems anyway that this ticket should be closed, or the subject changed and/or make it a feature request, right?
-
- The documentation - http://docs.qgis.org/2.0/html/en/docs/user_manual/ brings up a Javascript error when I access it:...
-
- Weekly QGIS for windows; a13cdf8
There seem to be an extraordinarily large number of toolbars enabled as default in t... -
- I should have checked before... Thanks Nathan.
Any opinions about the second proposal and about changing the default... -
- You can turn auto insert off in the console settings.
2013-07-31
-
- The python console automatically inserts the closing bracket when you type
e.g. for... -
- some background of previously discussed features here [0]
IMHO, this feature should be enabled by default. But we nee...
Also available in: Atom