Activity
From 2013-02-02 to 2013-03-03
2013-03-03
-
11:48 PM Bug report #7223: QgsVectorFileWriter fails in python
- Giovanni Manghi wrote:
>
> It should be nice make out if it a note for the developers cookbook, here in the tracker ... -
11:38 PM Bug report #7223: QgsVectorFileWriter fails in python
- Angus Carr wrote:
> So, the final working example is:
>
> [...]
> For the Record (or for people trying to make this ... -
09:49 PM Bug report #7223: QgsVectorFileWriter fails in python
- So, the final working example is:...
-
11:37 PM Bug report #6647: Combobox text from custom form is not written to feature
- Larry, what's the status of this? Did you merge your changes?
(I guess you did, I heard nobody complaining about unco... -
- It seems to work in the nightlies. Thanks.
-
- It seems to work in the nightlies. Thanks.
-
07:02 PM Bug report #7271: column indexing issue with joined tables
- Practical example with steps to reproduce issue:
1. Open villages_point.shp (projection is indian 1960 48n, but it's ... -
- I've spotted a pretty serious bug with joined columns in the attributes table window and symbology classification. Ba...
-
06:46 PM Bug report #6096: Negative values are classified incorrectly using new symbology
- By my testing this is fixed by pull request 453:
https://github.com/qgis/Quantum-GIS/pull/453
-
11:48 AM Bug report #7269 (Closed): cant load GRASS plugin (osx 10.8.2)
- I'm building QGIS from source (debug mode) on mac osx 10.8.x
grass 6.4.3 installed in :
@
/usr/local/grass/grass-6.4... -
09:43 AM Bug report #7268 (Closed): Master crashes after a typo in API: QgsMapLayerRegistry.removeMapLayer...
- Master crashes when I accidentally pass a single id (instead of a list) to QgsMapLayerRegistry.removeMapLayers()
Look... -
08:42 AM Bug report #7267: loss of attributes during split feature operation
- The attribute part is linked to #7112
Here, it seems, the attributes are not lost, but rather that the form does not... -
- If it is a regression is a blocker. I see this also on Linux so it should not be platform dependent.
-
- If it is a regression is a blocker. I see this also on Linux so it should not be platform dependent.
-
- If it is a regression is a blocker. I see this also on Linux so it should not be platform dependent.
-
- If it is a regression is a blocker. I see this also on Linux so it should not be platform dependent.
-
08:05 AM Bug report #7267 (Closed): loss of attributes during split feature operation
- Performing multiple cutting without saving after each cut results in loss of attributes of some features.
To experie... -
- No it's not merged yet, the pull request is still there : https://github.com/qgis/Quantum-GIS/pull/412
The fix needs... -
- It seems not. In fact the first generated pdf is OK. The other can't be opened with Adobe reader and have the same pr...
-
- Alessandro Ciali wrote:
> Good, but what about the bug fix by Olivier Dalang. I'm not sure is the same problem, but ... -
- Good, but what about the bug fix by Olivier Dalang. I'm not sure is the same problem, but probably related to. Was t...
-
- As a new feature not working as expected, I'll tag this as blocker, waiting for the developer feedback.
-
- This seems to be the same than #6856 (for which I provided a fix some time ago)
-
- When generating multiple pdf with Atlas based on a coverage map with +1 polygon, only the first pdf is working. The o...
-
- during editing, rubberband sometims disappear.
I'd experienced this bug, but I can't relate it to any particular acti... -
02:03 AM Feature request #6717 (Closed): Print composers names
- This is implemented in commit commit:0c777dd
It allows you to define a composer title, with the option to build on e... -
01:53 AM Bug report #4964: Copy to clipboard from python error window doesn't work
- Not working here today - copy windows clipboard to QGIS 1.8.05 dialog.
-
- Please test with the following commits:
https://github.com/qgis/Quantum-GIS/compare/95bcc7f449db...32afcc29b126
I h... -
- Please test with the following commits:
https://github.com/qgis/Quantum-GIS/compare/95bcc7f449db...32afcc29b126
I h... -
-
> And I was asking if it is possible to outline a plan for this to happen (how much time required, in which order t...
2013-03-02
-
09:07 AM Feature request #7213: Turn layer classes on/off with a checkbox
- Giovanni Manghi wrote:
> I don't think it is too late for any new feature it may be developed, but to add such featur... -
03:08 AM Bug report #7261 (Closed): table join & save as
- Two layers/tables are joined by attributes and the two tables have columns with the same column name (not the column ...
2013-03-01
-
11:40 PM Bug report #7068: Joined table regressions
- PullRequest: https://github.com/qgis/Quantum-GIS/pull/452
-
- Hi Salvatore,
Just a note about design workflow. It is best to present multiple compositions (or 'comps' as they are... -
01:09 PM Feature request #7211: New splashscreen for QGIS
- Hi Salvatore
Cool that you are working on this. Here are some point from me:
* The ribbons dont look good to me (pu... -
01:54 PM Bug report #7140: QGIS seg faults when removing a GRASS vector (or even when "zoom to layer" or e...
- can confirm this for master on Linux Mint 64bit from debian-nightly. Nearly every action with qgis with a loaded GRAS...
-
01:03 PM Bug report #7255: Cannot edit ESRI FileGDB in QGIS 1.8 (Win7 via osgeo4w inst.)
- Donovan Cameron wrote:
> I've posted an enhancement request for the osgeo4w package maintainers "OSGeo4W !#346":http:... -
12:52 PM Bug report #7255: Cannot edit ESRI FileGDB in QGIS 1.8 (Win7 via osgeo4w inst.)
- Jürgen Fischer wrote:
> donovan cameron wrote:
> > That revision you posted, is that a fix for this bug?
>
> yes.
> ... -
- donovan cameron wrote:
> That revision you posted, is that a fix for this bug?
yes.
> If so, will that show up in t... -
- @Jürgen Fischer
That revision[1] you posted, is that a fix for this bug?
If so, will that show up in the osgeo4w ins... -
- Giovanni Manghi wrote:
> I don't think it is enough to install gdal-filegdb and I don't think is qgis fault. AFAIK it... -
- Fixed in changeset commit:"808547e293da39b0977dbb162765314df70c3c65".
-
- I don't think it is enough to install gdal-filegdb and I don't think is qgis fault. AFAIK it is needed to have a copy...
-
- I don't think it is enough to install gdal-filegdb and I don't think is qgis fault. AFAIK it is needed to have a copy...
-
- I don't think it is enough to install gdal-filegdb and I don't think is qgis fault. AFAIK it is needed to have a copy...
-
- I don't think it is enough to install gdal-filegdb and I don't think is qgis fault. AFAIK it is needed to have a copy...
-
- Duplicates #7256
-
- Duplicates #7256
-
- Hi,
this is not a forum, but the place where to report issues in a specific way, using meaningful titles and detaile... -
- Hi,
this is not a forum, but the place where to report issues in a specific way, using meaningful titles and detaile... -
09:13 AM Bug report #7260 (Closed): Problem wiht window 7
- eh installed the versions qgis 1.7 and 1.8 (win 7 64bits), when I want access project properties Ctrl + p, closes the...
-
07:15 AM Bug report #7258 (Closed): GetFeatureInfo request with a FILTER doesn't find anything
- Fixed in commit:a777ce751500fad748e9204149b794b04dab218f
-
- Issue #7238 is probably related
-
- it is a regression.
-
- it is a regression.
-
- it is a regression.
-
03:36 AM Bug report #7258 (Closed): GetFeatureInfo request with a FILTER doesn't find anything
- Any request to WMS using GetFeatureInfo and a simple FILTER (i.e. id=4) makes the server unable to find any object ma...
-
- This is a client problem. GetFeatureInfo from browser works normally.
The problem is that QGIS now prefers the output... -
- This is a client problem. GetFeatureInfo from browser works normally.
The problem is that QGIS now prefers the output... -
- Issue #7258 is probably related
-
- Please submit a patch. cheers!
-
- Please submit a patch. cheers!
-
- Amit Kulkarni wrote:
> Pull request https://github.com/qgis/Quantum-GIS/pull/430 fixes this for all cases. 1:2000, 20... -
02:52 AM Bug report #7256 (Closed): Calculation of graduated symbology breaks is broken in master
- Fixed in changeset commit:"54f3e0a445140e38cdcb4049e5d55d658968ac9f".
2013-02-28
-
12:25 AM Bug report #7257 (Closed): Define current projection needs redraw action
- After changing the CRS of a layer with fTools 'Define current projection' command, the layer should be appear shifted...
-
- With Quantum GIS Lisboa, a .prj file will be written by using fTools 'Define current projection' command, but no .qpj...
-
- Attached pull request fixes break calculation:
https://github.com/qgis/Quantum-GIS/pull/449 -
- Currently the calculation of Standard Deviation, Quantile and Natural Breaks is broken in master (probably since the ...
-
- I can't start an editing session on an ESRI FileGDB.
I'm using Windows 7 64bit with QGIS 1.8 installed from the osge... -
02:12 PM Bug report #7254 (Closed): MSSQL Provider should handle spatial tables with no FID columns
- Currently the driver refuses to load the layer
-
04:06 AM Bug report #7253 (Closed): save problem on units DegreesMinutesSeconds
- when set "Layer units" of "Project properties" to "Degrees, Minutes, Seconds" and save the project ,
the "unit" sett...
2013-02-27
-
- Could you check whether the recent fix for #7249 could also solve this problem? I've tried with date type and it appe...
-
- Problem I described is solved as soon as pull request [1] get accepted.
[1]: https://github.com/qgis/Quantum-GIS/pul... -
- I executed the attached code in the python console on latest master.
The diagrams show up and I could not provoke a c... -
- A Blocker as it crashes.
But seems not to be a regression, as the bindings where not even present before. -
- A Blocker as it crashes.
But seems not to be a regression, as the bindings where not even present before. -
- A Blocker as it crashes.
But seems not to be a regression, as the bindings where not even present before. -
- Shouldn't we tag this as blocker as it is a regression? cheers!
-
- I am writing a plugin that loads three layers from a set of text files. It loads them using code from the cookbook, a...
-
- Confirmed. setAttribute() by index or by field name don't work. Also I can't assign attribute values using...
-
- Well, I tried what you suggested, and the code now runs, but I get null in all my attributes......
-
- I think no user selects ASCII-incompatible character encoding such as UTF-16 and UTF-32, to create shapefiles, becaus...
-
- Another test file is on #5761 (issue before the API merge). The project file in testdata.zip contains a shape layer j...
-
04:36 PM Feature request #7211: New splashscreen for QGIS
- I had have some time to work on it so I also reviewed the main logo
and I added it to the first comment !
Sorry if I ... -
08:27 AM Feature request #7211: New splashscreen for QGIS
- I think the vertical line is too thick by the logo, also too many fonts. By the way at what point are we dropping Qua...
-
- Fixed in changeset commit:"b5dc7788a1a2f04077c37c01b8c35b0acdec59bd".
-
-
12:22 PM Bug report #7240: Copy and Paste of Features does not work
- ok - I have to test again tomorrow at work. I don't have the project with me. Thank you both for testing!
Andreas -
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > It works here on master/ubuntu. Can you add a sample? cheers!
Wo... -
- Andreas Neumann wrote:
> Hi Giovanni,
>
> Did you also test with 2 Postgis Layers or just with shapes or spatialite?... -
- Giovanni Manghi wrote:
> It works here on master/ubuntu. Can you add a sample? cheers!
-
- Hi Giovanni,
Did you also test with 2 Postgis Layers or just with shapes or spatialite?
Andreas -
- It works here on master/ubuntu. Can you a sample? cheers!
-
- The split works fine for me on a newly created DB and vector on qgis master.
On the other hand if the vector was cre... -
- The split works fine for me on a newly created DB and vector on qgis master.
On the other hand if the vector was cre... -
- The split works fine for me on a newly created DB and vector on qgis master.
On the other hand if the vector was cre... -
- The split works fine for me on a newly created DB and vector on qgis master.
On the other hand if the vector was cre... -
- The split works fine for me on a newly created DB and vector on qgis master.
On the other hand if the vector was cre... -
- The split works fine for me on a newly created DB and vector on qgis master.
On the other hand if the vector was cre... -
08:18 AM Bug report #7244 (Closed): Split multipolygon geometry fails
- Hi,
Splitting multipolygon spatialite geometries does not work as expected.
I try to split a geometry with 2 patche... -
- I would seriously consider getting a professional logo done and also a splashcreen, no need to be changing the splash...
-
07:29 AM Bug report #7243 (Closed): Default CRS for Georeferencing
- If a user wants to georeference a raster file by clicking points on the image and on the canvas, it is necessary to s...
-
05:23 AM Bug report #7241 (Closed): Border of vector feature visible even with no pen border
- When I do not want any style border for features, the map shows white lines between objects.
See the file attached
2013-02-26
-
- When copying and pasting features from one layer to another nothing happens.
Maybe a problem of the new Vector API?
... -
- Nice. Selfishly happy to see my refreshed logo proposal being used ;) That said, for the sake of consistency across t...
-
- I really like the way this is evolving. You might have to tweak it once we get a revised logo.
-
- I added a new version that has the message area on the left instead of center
and I removed the gradient on the botto... -
03:05 AM Feature request #7211: New splashscreen for QGIS
- The background is nice now, thanks for your work.
I am still not totally convinced by the fonts. Perhaps a 'serif' fo... -
- I updated the issue with the latest edited image.
I also added the SVG version. -
- I updated the issue with the latest edited image.
I also added the SVG version. -
- Unfortunately as 3rd party plugin, this is not the right place where to file a ticket for it.
You should look here
... -
- Unfortunately as 3rd party plugin, this is not the right place where to file a ticket for it.
You should look here
... -
08:00 AM Bug report #7239 (Closed): Metatools plugin, error when loading
- A time ago I reported a bug to the developer of Metatools, but haven't got any response. So I dare post it here. The ...
-
- I made a pull request for this :
https://github.com/qgis/Quantum-GIS/pull/441 -
- The worst consequence (crash) has been fixed here
#7225
but the user is not allowed anymore to digitize an adjacen... -
- The worst consequence (crash) has been fixed here
#7225
but the user is not allowed anymore to digitize an adjacen... -
- The worst consequence (crash) has been fixed here
#7225
but the user is not allowed anymore to digitize an adjacen... -
- The worst consequence (crash) has been fixed here
#7225
but the user is not allowed anymore to digitize an adjacen... -
- Marco Hugentobler wrote:
> QgsMapToolAddFeature now rejects features with empty geometry and displays an error messag... -
- QgsMapToolAddFeature now rejects features with empty geometry and displays an error message (208c9206ad972b96aef0fdfd...
-
- with
commit:208c9206ad972b96aef0fdfdebd8012ffa120fe7
this is fixed.
I just wonder if there are other ways (other t... -
- fixed with
commit:208c9206ad972b96aef0fdfdebd8012ffa120fe7 -
- fixed with
commit:208c9206ad972b96aef0fdfdebd8012ffa120fe7 -
- have you tested qgis master?
-
- have you tested qgis master?
-
01:30 AM Bug report #7237 (Closed): SLD dashed line
- I have noticed in QGIS version 1.8 when you style line data as a simple line with other defined attributes and save i...
-
- With qgis (server) master, the identify tool does not return any result on a published layer. In the qgis log I see
... -
01:24 AM Bug report #1963 (Reopened): "Ghost Lines" when using Anti-aliasing, polygons with shared boundar...
- Turning off "Make lines appear less jagged..." removes the thin lines on the screen but they still show when printing...
-
- Turning off "Make lines appear less jagged..." removes the thin lines on the screen but they still show when printing...
-
- Turning off "Make lines appear less jagged..." removes the thin lines on the screen but they still show when printing...
-
- Turning off "Make lines appear less jagged..." removes the thin lines on the screen but they still show when printing...
-
- Turning off "Make lines appear less jagged..." removes the thin lines on the screen but they still show when printing...
-
- Turning off "Make lines appear less jagged..." removes the thin lines on the screen but they still show when printing...
2013-02-25
-
- This bug is not present in ubuntugis.
-
- I too have encountered this. The color in exported pdf files is correct only if "Print as raster" is checked in Qgis ...
-
- I too have encountered this. The color in exported pdf files is correct only if "Print as raster" is checked in Qgis ...
-
- The fix became disabled by the recent API change. I need fix again.
-
- Added a set of test data, which includes a Shapefile and two CSV files. One CSV file (fruits1.csv) has keys for join ...
-
- Added a set of test data, which includes a Shapefile and two CSV files. One CSV file (fruits1.csv) has keys for join ...
-
- Hi !
I think it would be really nice if composer labels rendered as HTML allowed relative links.
The base URL could... -
- Giovanni Manghi wrote:
> I compiled on ubuntu GDAL master and then qgis master against it.
>
> The I opened the (the... -
- I compiled on ubuntu GDAL master and then qgis master against it.
The I opened the (thematicmapping.org) world borde... -
08:27 AM Feature request #7235 (Open): Add option to avoid users producing invalid topologies while digiti...
- Attempts to remove intersections when digitising over invalid topologies lead to unexpected behaviour. See bug #7225 ...
-
- Hi !
Wouldn't it be nice if copy/pasted elements in the composer would also copy the position ? This way, after care... -
- Hilmy Hashim wrote:
> Did not see that. Great, thanks. Now, why did the column become wide?
because the dialog has b... -
06:09 AM Bug report #7227: Identify Feature tool not showing any values
- Did not see that. Great, thanks. Now, why did the column become wide?
-
- you need to scroll horizontally the identify panel in order to see the results. See my screenshots.
-
- you need to scroll horizontally the identify panel in order to see the results. See my screenshots.
-
- you need to scroll horizontally the identify panel in order to see the results. See my screenshots.
-
- you need to scroll horizontally the identify panel in order to see the results. See my screenshots.
-
- Some sample data as requested.
-
- This is a follow up of #7214, "disable the layers when outside the "scale dependent rendering" range".
2013-02-24
-
- Hi,
Did you recently test with current master? I believe it should be fixed now. You also need the most recent OGR t... -
- Larry, working great. On the user experience side of things, there is a delay (for me a 2-5seconds) when duplicating ...
-
- Larry, working great. On the user experience side of things, there is a delay (for me a 2-5seconds) when duplicating ...
-
- Larry, working great. On the user experience side of things, there is a delay (for me a 2-5seconds) when duplicating ...
-
- Well, that must have been the fastest ever implemented feature request :) thanks. Will give it a try as soon as it's ...
-
- Hi,
This has been implemented in commit commit:5ac7d03
Please test, thanks. -
- Hi,
This has been implemented in commit commit:5ac7d03
Please test, thanks. -
- Larry, confirmed fixed. There is however a small issue left unresolved, which is and isn't directly link to this. Whe...
-
- Good news everyone! Clicking on Apply or Ok from the Layer Property window doesn't collapse layer items anymore.
The... -
-
> However, it would be so much safer if users were digitising by default with an option switched on that rejects al... -
- Ideally (and I do so wish that I could offer to do the work on this) I think QGIS should reject an addition to the at...
-
- possible duplicate of #5584
see also #7229 -
- Duncan Golicher wrote:
> This layer causes a crash (sometimes) when another polygon is drawn. The close down is unpre... -
- This layer causes a crash (sometimes) when another polygon is drawn. The close down is unpredictable with the latest ...
-
- Duncan Golicher wrote:
> I am using the latest (nightly) build that I installed this morning at 11 am on Ubuntu.
> Th... -
- I am using the latest (nightly) build that I installed this morning at 11 am on Ubuntu.
The close down/freeze up beha... -
- Duncan Golicher wrote:
> No, it is not fixed in the master, unless there are changes that are
> not yet included in t... -
> I could post an example layer,
please do, because with my own tests I get no crash (qgis master on ubuntu). Indee...-
- No, it is not fixed in the master, unless there are changes that are
not yet included in the nightly build for Ubuntu... -
- Fix in "pull request !#436":https://github.com/qgis/Quantum-GIS/pull/436
Not sure if it's the best way to do it.
May... -
- Hi, I cannot confirm here, also with the docked identify window. Can you please attach sample data? thanks!
Hilmy ... -
- I have tried with several layers, they are the same. They are Ok in 1.8. I have included a screenshot.
The docked I... -
- cannot confirm here, can you share sample data? thanks.
-
- This ticket is a follow up of #5584
In that ticket an issue that caused crashes in qgis 1.8/1.7.4 (but not 1.6) was ... -
07:59 AM Feature request #7211: New splashscreen for QGIS
- I like the idea of squared corners too.
As to the overall design, there is too much going on for me right now. So m... -
- Marco Hugentobler wrote:
> Code wise, it is no problem to skip the feature. I don't know how it is from a user perspe... -
- Marco Hugentobler wrote:
> Code wise, it is no problem to skip the feature. I don't know how it is from a user perspe... -
- Marco Hugentobler wrote:
> Code wise, it is no problem to skip the feature. I don't know how it is from a user perspe... -
- Current Version of Qgis Master writes the following .prj file:...
-
- Current Version of Qgis Master writes the following .prj file:...
-
- dr - wrote:
> Known workaround. But it is not clear why one-line approach doesn't work.
I think the comment nr1 of t... -
03:18 AM Bug report #7228: Incorrect return on boundingbox one-liner
- Salvatore Larosa wrote:
> This workaround avoid the problem;
Known workaround. But it is not clear why one-line appr... -
- it seems related to #777, although I don't get any crash !
This workaround avoid the problem;... -
- is this a regression since 1.8?
-
- * Open vector layer;
* Select any features;
* Run python console and try to perfom the following command:
>>>geom =...
2013-02-23
-
- The Identify Feature tool is not showing any attribute values in the latest master, only the atribute names. The attr...
-
- Charles Petersen wrote:
> I looked for other .qgis folders on my entire 1TB hard drive, but found none. After confirm... -
12:32 PM Bug report #7226: All attempts to specify a project, layer or default coordinate reference system...
- I looked for other .qgis folders on my entire 1TB hard drive, but found none. After confirming that there was no .qgi...
-
- I think you might be right. I will check for the .qgis folder elsewhere in my system. Right now, however, I'm reinsta...
-
- Charles Petersen wrote:
> I will reinstall the program, although I must say I have already done that. I assume that Q... -
- I will reinstall the program, although I must say I have already done that. I assume that QtCore4.dll is a QGIS module.
-
- try re-installing the program?
something seems wrong with
Fault Module Name: QtCore4.dll -
- Thanks for the feedback. I moved the .qgis folder to a flash drive,d restarted QGIS, and attempted to specify a CRS b...
-
- try (backup) and remove the .qgis folder.
What is the attached .exe file? -
- All attempts to specify a project, layer or default coordinate reference system (CRS)from any available menu or dialo...
-
- Stefano Costa - wrote:
> And, most importantly, is it too late for being included in the 2.0 roadmap?
I don't think ... -
- Seems like the TOC is waiting for a major update :-)
Is it possible to outline a plan for adding all these features?... -
- if this issue was caused by this
#5584
then it has been fixed in master, please test and report back. -
- From what I see in the PDF you are using qgis 1.8. Please try if with master the crash still happen, of yes please at...
-
- This happens on QGIS 1.8 *and* master or just 1.8? Can you attach sample data? Can you post the error message you get...
-
- If a user attempts to use the avoid intersection feature when digitising over a polygon with topological errors the n...
2013-02-22
-
- Yeah the API has changed in master. Try this:...
-
- Using the code from the QGIS python cookbook, QgsVectorFileWriter fails, as shown below. Has the API changed? This co...
-
- Fixed in changeset commit:"cd3cd9433e8988e62720401402c5841db08d7a12".
-
08:39 AM Bug report #6184: Map canvas does not update after "paste style"
- confirmed on master.
-
- conversion to Double seems to be done here:
[[https://github.com/qgis/Quantum-GIS/blob/master/src/core/symbology-ng/q... -
- It could be simple to solve since same problem occured with WMS bounds and scales:
here are some revisions solving th... -
- QML and mapinfo tab are also concerned
-
- confirmed on both 1.8 and master dc074b3.
when classifying continuous numerical data (shp - field type; real ; leng... -
09:43 AM Feature request #7213: Turn layer classes on/off with a checkbox
- Yet another nice feature would be to allow user change class' symbol directly from TOC
-
- another killer feature would be the possibility to *select* features by selecting a symbology class in the TOC. I thi...
-
- +1, that feature is extremely desired.
-
- As per http://gis.stackexchange.com/questions/25759/switch-classes-on-off-within-shapefile-in-qgis-1-8?rq=1 it would ...
-
- In the QGIS web client try set up a simple search, then try search for two words separated by a space. A message will...
-
- Yes, confirmed here, and it looks like a n / n-1 array bounds error.
Needs to be confirmed again in 1.9 when classif... -
- Confirmed on OSGEO4W dc074b3
2013-02-21
-
-
10:08 PM Feature request #3989: PostgreSQL hstore support
- Should be solved in commit:8176da04f28682b4a7ab4f396c91186ea8f614da
-
12:02 AM Bug report #7212 (Closed): WFS client is broken
- WFS client is not working. It connects to a WFS service and it seems to get the data (it takes longer when the layer ...
-
- Fixed in changeset commit:da60fe
-
- The problem is that changeAttributeValue ignores the @emitSignal@ parameter and therefore triggers the attribute tabl...
-
-
-
- Should be fixed in master branch d190b2316b25b6c30e3416a61cf5542d1fd6e227
-
- Should be fixed in master branch d190b2316b25b6c30e3416a61cf5542d1fd6e227
-
- As I said in my mail [1] (meanwhile I done some changing), I'd like to see a new splash screen on start up of QGIS,
s... -
- When trying to use the WCS client on qgis master and Ubuntu 12.04 I get crashes or error messages or the layer are ad...
-
- The "merge shapefiles" tool is very inefficient, when applied to hundreds/thousands of shapes the progress bar barely...
-
03:25 AM Bug report #7205 (Closed): Build pyramids - not building pyramids
-
-
- if is a sextante issue, please file it under sextante. Cheers!
-
- That isn't supposed to be a strike-through. but a "- >" (without space)
-
- Using master - 5ed164a on Windows 7 32bit.
- I have a TIF file which has no pyramids.
- Using the SEXTANTE Toolbox -... -
- Using Master 5ed164a
This seems like quite a bad one because it appears to work but actually doesn't give feedback t... -
- By Andreas suggestion I give the ticket to Marco and add as watcher Jürgen.
-
- Also occurs in master
2013-02-20
-
- With QGIS 1.8 I'm able to create a project with layers from a tileacache server and then serve them as normal WMS lay...
-
- Fixed in changeset commit:"64c9a4dec44e8f3dd4aa93674cc56b3b2409f531".
-
11:54 AM Feature request #6860: AddGPX icon is used for both GPS tools and Create New GPX layer
- For GPX Tools
http://trac.osgeo.org/osgeo/changeset/10021
For new layer
http://trac.osgeo.org/osgeo/changeset/10026
... -
- Fixed in changeset commit:"6f378682b05536076a01af8476c91dfbbcc3d405".
-
- Thanks for the icon, Robert. The ticket is not about that, however :)
Still open. -
- Done in
http://trac.osgeo.org/osgeo/changeset/10026 -
- The title is self-explaining. Some plugin actions should be put to the Layer->New submenu (New GPX Layer, New Memory ...
-
- does it happen with the latest master?
-
11:20 PM Bug report #7167: Scale box input doesn't get converted to 1:xxxx
- Not sure what you mean, but scales "1234" and "1:1234" is not the same to me. Neither is "0.001" and "1000".
-
07:49 AM Bug report #7167: Scale box input doesn't get converted to 1:xxxx
- Pull request https://github.com/qgis/Quantum-GIS/pull/430 fixes this for all cases. 1:2000, 2000, 2000:1
-
- It would be nice for the Composer Manager to allow for the creation of a new print composer based on an existing comp...
-
03:07 PM Bug report #5861 (Reopened): Vector menu and Sextante -> ftools behaving inconsistently
- I'm with this same problem in QGIS 1.8 on Windows 7.
I've tested now with the master version compiled in the last we... -
- Just ran into this today. This is a significant regression.
When trying to update a simple integer field with 946 _s... -
- Fixed in changeset commit:"be3bad3e55cb8684a5f05c02566b6bea431e9352".
-
- it happens an all platforms, Windows included.
-
10:54 AM Bug report #7196 (Closed): Strange behaviour of Print manager popup
- At least on Gnome3 and OSX, probably on other DE, when clicking on Composer Manager, then on the desired layout, the ...
-
- Inj print layout: I think the scale more obvious for the user should be in percentage (0-100%) instead of 0-255, as i...
-
- When starting a new layout, the item properties tab is not shown entirely, and it has to be enlarged.
There are thre... -
-
- Observed in both: 1.8 and Master. With equal intervals, the same behaviour is observed in both: old and new symbologi...
-
07:09 AM Feature request #7192 (Closed): system specific location of qgis settings
- (couldn't reopen #1442)
Use a system-specific location for QGIS plugins and other generated user support files (IO... -
-
- Seems to be fixed now. Can we close?
-
- "Pull request !#431":https://github.com/qgis/Quantum-GIS/pull/431 will fix this.
In case the pull request gets reject... -
- Is caused by attributes not being a map, but a list and removal in ascending order...
-
- See also #7190
-
- Confirmed when removing multiple columns at once.
For example: try to remove first two columns. Actually 1st and 3rd... -
- Can you test qgis master? it works fine here.
-
- Graduated symbol classification only works with Equal Interval and Pretty Breaks.
Neither Quantile, Natural Breaks ... -
- Yes, it's a regression ( thanks, I was just searching for this ticket to add the regression status :) )
-
- Yes, it's a regression ( thanks, I was just searching for this ticket to add the regression status :) )
-
- Hi Borys, is this a regression? cheers!
-
- When removing columns in attribute table, all following columns move left and it works ok. Then, if I rollback the ch...
-
- Fixed in commit:d6cd228e5e12c28b348cf471a21daf2fdca389b5
-
- Fixed in commit:d6cd228e5e12c28b348cf471a21daf2fdca389b5
-
03:22 AM Feature request #7188 (Closed): Some user friendly additions to Batch Execution
- First of all - a cool feature!
Even cooler by:
1) Make a "Copy row" button - often the rows will be very much alike ... -
- I believe that the rectangle is drawn, but the border, which was previously black is now white and therefore I did no...
2013-02-19
-
- I think this is the right behaviour. If you want 1:2000, it's easy to write. If you want 2000:1 it is also easu to wr...
-
11:39 PM Bug report #7185 (Closed): Ftools - Check geometry Validity
- Une erreur est apparue lors de l'exécution du code python :
Hello,
When I close the tool "geometry Validity Check" I... -
- This seems to work on master... If I leave off extents + height/width qgis creates a default 800 x 600 png image.
-
- I could not replicate this. By open a shape, you mean shapefile?
-
- can you attach a subset of the original image here?
-
- Confirmed for more formats:
kml, gml, geojson, csv (and maybe more) via the usual Add (ogr) vector layer
gpx - also ... -
- On Linux to allow QGIS (GPSBABEL) "speak" with a Garmin USB gps unit (in my case a gpsmap 60c) it is needed to fix a ...
-
- This may be some side-effect of some of the recent changes in the print composer.
If you draw a rectangle in the pri... -
- The culprit is the layer:...
-
- The attached project causes QGIS to crash. Tested on several machines, several versions of QGIS (including 1.8 and cu...
-
- Sorry.
This problem happened to me last week and I'm not able to reproduce it since I restarted.
2013-02-18
-
- Can you attach sample data? thanks.
-
- Can you attach sample data? thanks.
-
- Can you attach sample data? thanks.
-
- Hello,
I 'have a problem with tool "Singleparts to multipart" :... -
- attached a sample, open in it in 1.8 (waypoints) and you will see the records, open in in master, empty.
Maybe are a... -
- I believe this regressed as part of commits which implemented the nice legend's multicolumn feature.
-
- Hi !
When you hit the "all" button in a ComposerLegend's widget, the legend displays all visible layers from the mai... -
- Marco Hugentobler wrote:
> The small gaps appear because of numerical problems, see geos-devel list (http://lists.osg... -
- The small gaps appear because of numerical problems, see geos-devel list (http://lists.osgeo.org/pipermail/geos-devel...
-
- The small gaps appear because of numerical problems, see geos-devel list (http://lists.osgeo.org/pipermail/geos-devel...
-
07:32 AM Bug report #7176: sextante plugin doesn't load anymore from build tree
- After '@sudo apt-get install python-psycopg2@', QGIS loaded fine. Not sure whether it's an appropriate dependency so ...
-
- I had a similar bug with ImportError: no module named tools. I updated, and now I'm getting "ImportError: No module n...
-
- I had a similar bug with ImportError: no module named tools. I updated, and now I'm getting "ImportError: No module n...
-
04:11 AM Bug report #7176 (Closed): sextante plugin doesn't load anymore from build tree
- Confirmed
-
- Confirmed
-
- Confirmed
-
- Should be fixed with commit:22256906d7
-
- Alex: still no dice after commit:d31b838
ImportError: No module named scipy -
- python-matplotlib took me a step forward, but isn't enough: ImportError: No module named tools
Could algs be disable... -
- I think this algs should be disabled because this introduces additional dependency from 3rd party Python module
-
- Sandro Santilli wrote:
> Oops, reading the backtrace may be useful... It ends with:
>
> ImportError: No module na... -
- Oops, reading the backtrace may be useful... It ends with:
ImportError: No module named matplotlib.pyplot
Do you... -
- I found and removed ~/.qgis/python/plugins/sextante and rebuilt from scratch (wiping out the whole build directory) b...
2013-02-17
-
- After removing SEXTANTE folder from /usr/local/share/qgis/python/plugins I still can load SEXTANTE when running QGIS ...
-
- Yes, /usr/local/share/qgis/python/plugins does look like a system wide location.
Wipe that out if you can.
I guess ... -
- Sandro Santilli wrote:
> Fails here with commit:8f25bcf -- can it be you have sextante installed system-wide ?
Hmm..... -
- Fails here with commit:8f25bcf -- can it be you have sextante installed system-wide ?
-
- Works fine here with latest master. Maybe this was related to missed directory in CMakeLists file, I've just fixed this
-
- This error may be an old one: #6639
-
- Couldn't load plugin 'sextante' from ['/home/strk/.qgis//python/plugins/pyarchinit/modules/gui', '/home/strk/.qgis//p...
-
- I just tried again and can confirm that:
1. the "greater-than" symbol isn't quoted (also confirmed by Larry above)
... -
- I just tried again and can confirm that:
1. the "greater-than" symbol isn't quoted (also confirmed by Larry above)
... -
-
- Should work now
-
- See also #7176
-
- I just tried again and I confirm it still happens. This is indeed with old symbology (it's the style of layers create...
-
- I have seen this, but just with the old symbology.
-
-
- fixed in commit:d8ec492dec
-
- fixed in commit:d8ec492dec
-
06:18 AM Bug report #7175 (Closed): fTools - Clip not working
- Hi,
Clip is not working when clicking ok button in latest master...stacktrace below.
Debug: src/core/qgsmessagelog.c... -
- fixed in commit:d8ec492dec
-
- fixed in commit:d8ec492dec
-
- Symmetrical Difference do not do anything on clicking ok button in latest master. Log given below..
rror[1] An error... -
- Fixed in changeset commit:"d8ec492dec2f25d79ce9e9f8a8458ba8b2eef13b".
-
- Hi,
The intersect geoprocessing tool is no longer working in latest master. Pressing the OK button does nothing. Log... -
06:56 AM Feature request #6664: Add PostGIS Layers dialog stops processing as soon as a user confirms a se...
- Sorry, I didn't understand what the feedback state meant.
This issue is not a support request. I am aware of the sto... -
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
- Fixed in changeset commit:"ddaded8ebb602b2a2ca3c068974c71ef40b99545".
-
- Convex Hull is not working with the latest master version. Nothing happens when I click on the ok button. Traceback b...
-
- closing for the lack of feedback - apparenty fixed in current SEXTANTE.
-
- closing for the lack of feedback - apparenty fixed in current SEXTANTE.
-
-
- closing for the lack of feedback
-
- closing for the lack of feedback
-
- closing for the lack of feedback
-
- closing for the lack of feedback
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
-
- ckosed for lack of feedback
-
- ckosed for lack of feedback
-
-
2013-02-16
-
- works again, not sure if/when/how was fixed.
-
- works again, not sure if/when/how was fixed.
-
- this is a new feature in master not working as expected.
-
- It affects qgis master, if the option is left checked then no issues.
-
- Open a shape in both qgis 1.8 and master.
Toggle editing and from the table of attributes dialog hit the "delete col... -
- I would say that is a bug and a regression.
-
- I would say that is a bug and a regression.
-
11:45 AM Bug report #7167 (Closed): Scale box input doesn't get converted to 1:xxxx
- In version 1.8 when you type a scale input into the scale box it automatically converts to 1:xxxx (the number you typ...
-
- Happens even if the raster is not actually reprojected, is just enough to have OTFR on. Tested on QGIS master.
As a ... -
04:30 AM Bug report #7165 (Closed): Linefeed in SVG not read in composer
- When I load an SVG into the composer that contains a text with more than one line the text is rendered in the same li...
-
- Thank you very much.
-
- Fixed in changeset commit:"7fb46498c9fb3c14a2d0b0fcc8e634dba2f1cade".
-
- I've noticed that the garbling occurs when saving Spatialite/PostGIS layer to Shapefile. The above fix means that if ...
-
- Fixed in changeset commit:"7fb46498c9fb3c14a2d0b0fcc8e634dba2f1cade".
2013-02-15
-
06:33 PM Bug report #7062: Print composer does not display attribute table and html frame
- I confirm also in QGis master, 424cc89 revision (15-02-2013)
it's a regression. -
- Fixed in changeset commit:"f22c62a891e4bd209d58c97f2d1e0a902dcae487".
-
- The bug is unrelated to the kind of table, it happens even if I drop that table.
Also, I've upgraded to current maste... -
- I have tables with only geometry fields, called:
"a", "b", "a+b", "b-a", "a+(b-a)"
The "Add PostGIS Layers" UI win... -
- Fixed in changeset commit:"b630692c747bb102ae8e1cc549b4aaa92a0c7447".
-
- At time of
@
emit addDatabaseLayers( mSelectedTables, "postgres" );@
The @mSelectedTables@ correctly contains t... -
- Console log shows:
@
ERROR: column "A+(B-A" of relation "marcobug" does not exist@
The first bogus trace in the log... -
- The problem persists with current master (commit:c036e7e)
-
- I've a table with a geometry field named "A+(B-a)" but qgis refuses to open it with the message:
@
dbname='strk' por... -
- Yes, it is. Please let your antivirus know and correct their bug.
-
- Yes, it is. Please let your antivirus know and correct their bug.
-
- Looks like it is picking something in the GRASS package. Pretty sure it would be a false positive.
-
02:00 AM Bug report #7158 (Rejected): Virus in the current version 1.8.0-2
- In the latest QGIS version either standalone or OSGeo4W my antivirus detect a trojan.
I can't download QGIS unless ... -
01:09 AM Bug report #7156 (Closed): Vector geometry simplification works only if project CRS matches layer...
- Steps to reproduce:
* make a shapefile in one CRS
* digitize a line
* change project CRS and enable OTFR
* try to use...
2013-02-14
-
-
09:45 PM Feature request #6820: Request to update CRS info to newest EPSG
- This issue might be related with post-installation process. cyssync worked fine when it was run manually or run in ne...
-
03:16 AM Bug report #6083: Corrupt datastore upon edit
- The problem I described was probably caused by the GeoTools library instead of QGis. (http://jira.codehaus.org/browse...
2013-02-13
-
- yes, it was fixed in qgis master.
-
- yes, it was fixed in qgis master.
-
05:05 AM Bug report #7121: Problem in displaying GRASS raster
- With QGIS 1.9 it's ok.
-
04:09 AM Bug report #7152 (Closed): Bug in Raster Calculator
- I try to mask and extract an erea from a raster file (DEM) but the exported file was an empty file with no values in ...
2013-02-12
-
- It seems that during post-installation crscync doesn't work correctly.
Here I attached setup.log.full for your diggi... -
- It turns out that this is nothing to do with EPSG updating. It seems that this issue is related with crssync.
Pleas... -
- Fixed in c90870d09594fc1d19fe30b2a8f40a1c049347b9
-
- Tilman Brock wrote:
> Can not confirm this on 1.8.0 running on windows 7 x64. Opening the project, opening the attrib... -
06:44 AM Bug report #7140: QGIS seg faults when removing a GRASS vector (or even when "zoom to layer" or e...
- Can not confirm this on 1.8.0 running on windows 7 x64. Opening the project, opening the attribute table for the (onl...
-
- It will happen even if zooming or opening the table of attributes.
-
05:04 AM Feature request #7150 (Open): Create a 'project template' via the 'Save project As' menu
- I heard about 'template projects', and found out that I was supposed to create a normal project in my .qgis/project_t...
-
- Using the GRASS browser, removing a vector from the mapset with the proper button simply does nothing.
2013-02-11
-
- See also http://lists.osgeo.org/pipermail/qgis-developer/2013-February/024347.html
-
09:38 AM Bug report #7129: QgsCollapsibleGroupBox auto saves its collapsed state
- Here is a patch with 2 classes, including Q_PROPERTY stuff. I haven't updated nor tested sip though.
Sorry I'll be a... -
- It might be easier to just disable saving the state for the groupboxes in the composer, to avoid any bugs and make li...
-
- Denis Rouzaud wrote:
> I don't know where is this "identifiable layers" but it might be good to do the same thing for... -
- I don't know where is this "identifiable layers" but it might be good to do the same thing for snapping options.
-
- On large projects the layers are very often organized in groups.
So when you open "identifiable layers" if groups ar... -
06:35 AM Bug report #7093: Curved labels ignore "Always show upside-down labels"
- Hi Larry,
Thanks for your feedback. Meanwhile, I will find a workaround. -
- The same issue seems to affect also the browser.
Add a ector to a SL datasource, and select to create also a spati... -
- I believe it is a regression because it used to work, anyway would be a new feature that is not working as expected (...
-
- ... not from the other renderers.
-
- Open a GRASS mapset and load a bunch of non GRASS layers in QGIS.
Then open a module like v.in.ogr.qgis or r.in.gdal... -
- Attached a simple GRASS mapset and qgis project. Try remove the vector layer from the project (or even do a "zoom to ...
-
- Fixed in recent commits. Thank you!
-
- In QGIS master it seems that the transparency of no data values is handled in the wrong way.
Open the attached raste... -
- See attached image. It does not have a tooltip, so I cannot say what is the function of that button.
-
- Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > Salvatore, I would tag this a regression, do you agree? cheers!
...
2013-02-10
-
- Simple steps to reproduce issue:
1. load the attached shapefile (inside randompoints.shapefile.zip)
2. open the attri... -
- > Solution would be to set the settings key to a unique value, possibly <frame id>/widget/parent.
Actually, you'd al... -
- Etienne Tourigny wrote:
> I've managed to replicate the problem, which is due to the fact that there are the same con... -
- I think that the composer bug should be treated separately from the main issue, which is having a means to set the or...
-
- Thanks for you answers.
I like the two classes solution too ! I'd suggest calling the complete one QgsPersistentColl... -
- Etienne Tourigny wrote:
> ...
> Another option would be to have 2 classes, one that is the widget itself (ay QgsColla... -
- I mostly agree with Larry. Existing functionality should not be changed, we have worked quite a bit on this.
Another... -
- aperi2007 - wrote:
> But still qgis is not reporting nothing in a GetFeatureInfo request.
QGIS now catches the servi... -
- aperi2007 - wrote:
> But still qgis is not reporting nothing in a GetFeatureInfo request.
QGIS now catches the servi... -
05:58 AM Bug report #7133: GetFeatureInfo doesn't seem work with text/html responses
- Hi,
I resolve the problem for the wrong wms server response.
It is explained in the ticket #7135.
It was a wrong re... -
- I check the log from a server wms.
Seem the qgis is doing a wrong request.
I open a more specific ticket.
-
- QGIS now prefers @ogr/gml@ responses (commit:50d4bb6d). The server advertise that format in it's capabilities, but a...
-
- QGIS now prefers @ogr/gml@ responses (commit:50d4bb6d). The server advertise that format in it's capabilities, but a...
-
- if is a regression is blocker.
-
-
- Hi,
I remove the "ogr/gml" format from the server settings.
Now the GetCapabilities will give this options:
<GetFea... -
- Also the request should do on the same reference system of the canvas not always in the epsg:4326.
-
- I check the GetCapabilities.
It report this availables formats.
<GetFeatureInfo>
<Format>text/gml</Format>
<Forma... -
- Hi,
qgis-dev is doing a wrong GML request on GetFeatureInfo.
I see the request is doing qgis is this:
http://web.r... -
- With old labels/symbology the labels were saved with other symbology stuff inside th qml style file. The new labels a...
2013-02-09
-
- I'm testing the new qgis-dev (commit:19f0666)
I noticed that @GetFeatureInfo@ requests fail on a wms server.
I trie... -
- Fixed in changeset commit:"19f06660dab2a426506ca84a7287aafe659b0df2".
-
Jürgen Fischer wrote:
> Larry Shaffer wrote:
> > Sorry, double-checked. The tested layer's source is a shapefile, no...-
- Larry Shaffer wrote:
> Sorry, double-checked. The tested layer's source is a shapefile, not PostGIS. Will test with s... -
- After some more testing, it is not QGIS, but the MemoryLayerSaver plugin. Moving issue to that tracker.
-
- Fixed in changeset commit:"92cbf8f506357ca804d20e8b09b2ae8f372ae3a4".
-
10:57 AM Bug report #7130 (Closed): ftools api error
- trying to generate a vector grid with ftools:...
-
10:18 AM Bug report #6973 (Closed): SLD Description
- It was already fixed in master branch many months ago. Unfortunately there will be no QGIS 1.8.1,so you have to wait ...
-
- It was already fixed in master branch many months ago. Unfortunately there will be no QGIS 1.8.1,so you have to wait ...
-
- > QgsCollapsibleGroupBox is by default auto-saving it's folded state.
>
> The feature is nice, but this has the foll... -
- > QgsCollapsibleGroupBox is by default auto-saving it's folded state.
>
> The feature is nice, but this has the foll... -
- Hi !
QgsCollapsibleGroupBox is by default auto-saving it's folded state.
The feature is nice, but this has the foll... -
- Firstly:
I know this could be done using the rule renderer.
But the use of the categorized rendering is more simp... -
01:31 AM Bug report #7079: qgis 1.8 - the parameter snapshot does not works
- A similar problem was described earlier:
#4076 -
- near the bottom right of the qgis window you have a "stop rendering" button, does this work for you?
-
- near the bottom right of the qgis window you have a "stop rendering" button, does this work for you?
2013-02-08
-
- When saving a project with memory layers the following dialog appears:...
-
- Hi Laurent,
Curved labels are always drawn right-side-up (by PAL lib). So, the "Always show upside-down labels" sett... -
- Hi Laurent,
Curved labels are always drawn right-side-up (by PAL lib). So, the "Always show upside-down labels" sett... -
- Hi Laurent,
Curved labels are always drawn right-side-up (by PAL lib). So, the "Always show upside-down labels" sett... -
- Hi Laurent,
Curved labels are always drawn right-side-up (by PAL lib). So, the "Always show upside-down labels" sett... -
- During a render that is taking a long time, the user has no opportunity to cancel the operation.
There should be eit... -
02:09 PM Bug report #6468: loadNamedStyle does not apply labelfield
- I am afraid I am encountering this bug on qgis 1.9 nightly for debian wheezy amd64. Old qml styles made in 1.7 that ...
-
- Sorry, double-checked. The tested layer's source is a shapefile, not PostGIS. Will test with some others provider types.
-
- Postgres/PostGIS
-
- using which provider?
-
- Hi,
Recently, I updated the Show/Hide Label tool to work with new vector API (commit:3676a38), but it should have wo... -
- Fixed by using a better approach for line splitting in commit:c90870d09594fc1d19fe30b2a8f40a1c049347b9
-
- Does commit:7faa1b21 fix this?
-
- Same problems with QGIS 1.8 on Fedora 17.
-
- please try qgis master, it should be fixed.
-
- When calculating an interpolation from a text file dataset using the r.in.xyz GRASS module, the raster is correctly c...
-
- Ticket moved to the proper projects.
-
- Ticket moved to the proper projects.
-
- Ticket moved to the proper projects.
-
- To be filed in the proper bug tracker.
http://trac.osgeo.org/osgeo4w/report/1 -
- To be filed in the proper bug tracker.
http://trac.osgeo.org/osgeo4w/report/1 -
- The Installer OSGEO4W (http://download.osgeo.org/osgeo4w/osgeo4w-setup.exe) doesn't download the setup file (Windows ...
2013-02-07
-
- Victor Olaya wrote:
> Works fine for me here in both cases. Can you tell us if you have no data values or not in your... -
- Victor Olaya wrote:
> Works fine for me here in both cases. Can you tell us if you have no data values or not in your... -
- Victor Olaya wrote:
> Works fine for me here in both cases. Can you tell us if you have no data values or not in your... -
- Works fine for me here in both cases. Can you tell us if you have no data values or not in your layer, and the formul...
-
02:50 AM Bug report #7117 (Closed): SAGA Grid Calculator does not work when "Use NoData" is set to "Yes"
- When "Use NoData" is set to "Yes", it is not working - works fine only if it is set to "No".
-
- Ahh :o) http://qgis.org/debian-nightly/dists/raring/
-
- In Print composer, "Opacity" is used, instead of "Transparency", as in the rest of QGIS. Better make it uniform, to m...
-
- I cannot confirm here on qgis master/linux, what happens is that qgis pops up the "missing layer" dialog.
Please tes... -
01:37 AM Bug report #7113 (Closed): QGS project files containing openlayers layers make QGIS crash when op...
- Hello to all,
It's all in the subject.
I tried to open a QGS file containing openlayers layers right after my QGIS s... -
01:47 AM Bug report #7115 (Closed): eVis Event Browser doesn't show http images
- I'm trying to get eVis Event Browser show the images of the POINTs on a layer.
I've added the layer from Postgres. Th... -
- Hello to all,
As Grass evolves regularly but on a different time schedule than Qgis, I believe it would make sense...
2013-02-06
-
> Only buffer function brings the following error report, functionality is ok and buffer is generated:
this has alr...-
> Only buffer function brings the following error report, functionality is ok and buffer is generated:
this has alr...-
12:26 PM Bug report #7105: ftools execute functions only with the first datarecord from source in QGIS master
- Upate to rev. b35a456, ftools works ok with all datarecords.
Only buffer function brings the following error report,... -
- here too it not possible to replicate this issue. It would be better to attach sample data. cheers!
-
- if is a regression is a blocker.
-
- if is a regression is a blocker.
-
- if is a regression is a blocker.
-
- Hi !
Just after splitting a polygon, while still in editing mode, one of the two parts does not display any attribut... -
10:49 PM Bug report #3250: Vector layers printed/exported as rasters, even when "Print as Raster" is unche...
- Not sure if it's the same problem. But I can't get layers with the line pattern fill to render as vector when I expor...
-
- pvanbosgeo - wrote:
> Is ftools not part of the core now? It is in any case not on the page https://issues.qgis.org/p... -
06:33 AM Bug report #7106: Error when running python functions / plugins
- Is ftools not part of the core now? It is in any case not on the page https://issues.qgis.org/projects/qgis-user-plug...
-
- In qgis master vector APIs have been changed, the plugins must catch up, so you need to file tickets in the proper pl...
-
- In qgis master vector APIs have been changed, the plugins must catch up, so you need to file tickets in the proper pl...
-
- Hi, I am having trouble running any python plugin in 1.9.0-Master Master, 51f2383 on Ubuntu 12.10. As this seems to a...
-
- stefano campus wrote:
> is ftools still a plugin? i believed that ftools were "embedded" in the core of qgis
ftools ... -
- is ftools still a plugin? i believed that ftools were "embedded" in the core of qgis
-
- Fixed in changeset commit:"81d865aaa7463b9624793f93cc158168451e58a8".
-
06:17 AM Bug report #7107: rasters with decimal values don't display correctly in QGIS 1.9
- Yes, blocking caused by some of these new histogram controls seems like a possibility.
-
- This problem isn't replicated on my MAC where I also have QIS 1.9. There, both images appear identical and correctly ...
-
- If is a regression since qgis <= 1.8 then is a blocker issue.
-
- If is a regression since qgis <= 1.8 then is a blocker issue.
-
- If is a regression since qgis <= 1.8 then is a blocker issue.
-
- QGIS version 1.9.0-Master QGIS code revision exported
Compiled against Qt 4.8.1 Running against Qt 4.8.1
Compiled aga... -
- pic a wms layer in the same CRS of the project, then change the CRS of the project and enable OTFR. The result is sim...
-
- Marco Hugentobler wrote:
> Code wise, it is no problem to skip the feature. I don't know how it is from a user perspe... -
- Marco Hugentobler wrote:
> Code wise, it is no problem to skip the feature. I don't know how it is from a user perspe...
2013-02-05
-
- Code wise, it is no problem to skip the feature. I don't know how it is from a user perspective (if rejection is pref...
-
- Marco Hugentobler wrote:
> I'm assuming this was with ogr data sources? If so, fixed in commit:96a8bd64d8cdd4aecdf9e0... -
- I'm assuming this was with ogr data sources? If so, fixed in commit:96a8bd64d8cdd4aecdf9e0789d525cf09f44e6a1 (if not,...
-
- Field calculator is also broken when trying to update a field for all features (i.e. with the "update selected only" ...
-
- Hmm, this issue might need to be re-opened? I'm not seeing any raring directory @ http://qgis.org/debian-nightly/dist...
-
- Hi,
the maxsize window constraint is because the
help has little content and maximizing the window it was misleadin... -
- Hi,
the buffer tool works as expected here,
and that error will be fixed with this [1] pull request.
Could you prov... -
- I tested some ftools functions (buffer, polygon to line e.g.)from menue item "Vektor" in QGIS 1.9.0 Alpha, commit:7dc...
-
- Confirmed, is a regression.
-
- Confirmed, is a regression.
-
- Confirmed, is a regression.
-
- Under QGIS master, the print composer's legend item improperly calculates its right-side box spacing as it fails to t...
-
- fixed in commit:3b29fada
-
- fixed in commit:3b29fada
-
- a python error occurs doing "spatial join"
Errore durante l'esecuzione di codice Python:... -
- The options are probably:
1 Cut the URL back to the bit before the ? and accept none of the parameters.
2 Keep som...
2013-02-04
-
- Hm, that would probably mean testing the base urls against a parameter list (also in WMS, WCS). Imagine a user that e...
-
- When setting up a WFS request, and entering a URL, I entered this (for testing purposes):
http://wppgeog3:8082/geose... -
- Changed in 2c980d2596e9d9c520b70265438d879348d2f47a
-
- Following #6921
With master I get a different bug.
Using either:
http://wppgeog3:8082/geoserver/wfs?version=1.1.0
o... -
- Jonathan Moules wrote:
> The version I'm using is: http://gis-lab.info/programs/qgis/NextGIS-QGIS-5ed164a-29.01.2013.... -
- I don't think this is a WFS specific issue (why I didn't set that) - one of those requests is WCS.
The version I'm u... -
- > Using NextGIS built against master on Windows 7, 32bit.
Which version is that? -
- Further testing - QGIS starts one of these ping cycles whenever a bad request has been made through it. So when I ent...
-
- As you can see in the attached screenshot, QGIS keeps pinging my web-services.
There are a lot of problems here:
* Q... -
- @Giovanni Manghi - thanks for the link btw.
-
- This issue occurs identically in the linked 1.9
-
- In the bottom right of QGIS there's a little exclamation mark inside a triangle. It reports "messages logged". I've m...
-
- Confirmed that it still happens in master. Clicking the top reference filter does nothing.
-
-
- This issue is resolved in master. An error comes up.
-
- Currently when opening a file, be it vector, raster, or style, the file-open dialog has only allows one supported fil...
-
- This appears to be resolved in master.
-
- Curved labels ignore "Always show upside-down labels".
See curved line without label at the center of the attached sc...
2013-02-03
-
- Would be nice for the new labelling engine to offer a drop shadow style for labels. Blurring needn't be part of this ...
-
- error is
@An error has occured while executing Python code:
Traceback (most recent call last):
File "/usr/share/...
2013-02-02
-
- Don't think much of the comment about toggling the layers out of edit mode.
I often have 10 or 12 layers in editing ... -
- Does not seems to happen here, at least on qgis master. Can you give it a try and report back? thanks.
-
- Does not seems to happen here, at least on qgis master. Can you give it a try and report back? thanks.
-
- The python console help window seems to have a max size about 540x320. It just looks bad and is hardly readable.
Howe... -
- please notify the plugin's author.
-
- please notify the plugin's author.
-
05:25 AM Bug report #7088 (Rejected): Polygonizer plug-in not working in Master
- Using nightly Master, Ubuntu 12.04 (amd64).
Attempting to use the Polygonizer fails with the Python errors listed b... -
> So I don't know why this is different in 1.9, because it doesn't automatically change that setting when I load the...-
> So I don't know why this is different in 1.9, because it doesn't automatically change that setting when I load the...-
> So I don't know why this is different in 1.9, because it doesn't automatically change that setting when I load the...
Also available in: Atom