Activity
From 2012-08-31 to 2012-09-29
2012-09-29
-
10:34 PM Bug report #6222: implement QgsStyleV2::save()
- Etienne Tourigny wrote:
> Partial fixes commit:b145998078 (by me) and commit:447c0d1 (by Arun).
>
> tests now workin... -
08:15 AM Bug report #6243: QgsProject.read() should open a project file in "append" mode
- The code is intentionally clearing all stuff, surely for project properties but don't know if for anything else too (...
-
- I'm also looking for a way to "append" layers to an existing project. Ideally all under a group named after the file.
-
06:54 AM Bug report #6351: field calculator: correct calculation, but nulls written to table
- Same here on Ubuntu 12.04 QGIS 1.8. The problem is when I use a shapefile and choose a field name with more than 10 c...
2012-09-28
-
09:15 AM Bug report #6433 (Closed): Can not use the "entity manager OSM" when I load OSM data from a file ...
- Data are loaded, polygons, lines and points appear in the viewer, but the entity manager does not work and an error m...
-
- Great, fixed without a line of code (stupid me).
It's already optional !!
For the occasional reader: Settings->Option... -
- Great, fixed without a line of code (stupid me).
It's already optional !!
For the occasional reader: Settings->Option... -
- Great, fixed without a line of code (stupid me).
It's already optional !!
For the occasional reader: Settings->Option... -
- I found this snippet in qgsmapcanvas.cpp:
case WheelZoomToMouseCursor:
{
// zoom map to mouse cursor
... -
- Uhm, I found out that it is actually "kind of" easy to put a point to the center: select ZoomIn tool, click on the po...
-
- While zooming in to a feature with the mouse wheel it is very easy to loose it unless it is perfectly centered in the...
-
- I would love to have a "user defined zoom limit" if not else to _remove_ it (I often find myself in need to zoom in m...
-
- I would love to have a "user defined zoom limit" if not else to _remove_ it (I often find myself in need to zoom in m...
-
06:44 AM Bug report #6430 (Closed): QGIS doesn't conform to WMS 1.3.0 resolution spec
- The standard WMS 1.3.0 specifies the pixel width : 0.28 mm. That value gives a resolution of 25.4/0.28 = 90.71 dpi ap...
-
04:46 AM Bug report #6429 (Closed): SVG - don't understand correctly stroke(param(outline))
- Hi,
I try to set on a simple new svg 8from inkskape) the two params:
fill="param(fill) #.."
and
stroke="param(outli... -
03:48 AM Bug report #6428 (Closed): Gui: horizontal spacer for "marker line" symbols seems out of place
- In the redesigned symbology gui when a "marker line" symbol layer is selected (for a polyline layer), or an "outline:...
2012-09-27
-
- Crashes on Linux, too:...
-
- Master on Windows. I haven't tested on Linux yet.
-
07:11 PM Bug report #6425 (Closed): Inaccurate counts of heavily overlapping points
- Disregard. I screwed up.
-
- Disregard. I screwed up.
-
- I have a PostGIS table with a geometry column with nothing but points. Due to a problem with my geocoder, I have 39,8...
-
- When I use the *Identify Features* feature, the *Identify Results* dialog should show a count of items found. Occasio...
-
10:09 AM Bug report #6423 (Closed): Link to DTD document is broken
- Also duplicates #4408
-
- Also duplicates #4408
-
09:29 AM Bug report #6423 (Closed): Link to DTD document is broken
- Link to DTD document within *.qml file is broken: http://mrcc.com/qgis.dtd
-
08:00 AM Bug report #6422: QGIS delete Postgis features after trying to merge them
- OK, but saving does call AddFeature before deleteFeature if I read logs well. Any reason not to call DeleteFeature fi...
-
07:42 AM Bug report #6422: QGIS delete Postgis features after trying to merge them
- @addFeatures@ and @deleteFeatures@ are independant operations on provider level. This would need a change in the pro...
-
- Hi all, quite a rare bug, but a severe one here, since it destroys data with no way to recover without backup:
Data ...
2012-09-26
-
01:05 AM Bug report #6418 (Feedback): Crash when zooming on a polyline memory layer with markers placed "o...
- What QGIS version? What platform?
-
- What QGIS version? What platform?
-
- - Create a memory layer with some polylines using the "edit any layer" plugin, or using the "new memory layer" plugin...
-
-
- René-Luc ReLuc wrote:
> commit 593da452193f31d3941b56a64369c692b866bf40
> for patch V2
Hi René-Luc,
I have just ins... -
- René-Luc ReLuc wrote:
> commit 593da452193f31d3941b56a64369c692b866bf40
> for patch V2
Hi René-Luc,
I have just ins... -
03:42 AM Bug report #6413: Support SLD with multiple FeatureTypeStyles
- SLD docs containing multiple FeatureTypeStyle are not supported yet.
-
- I have the following SLD description:...
-
- Wrong tracker, moved to QuantumGis.
-
- Wrong tracker, moved to QuantumGis.
-
- Now import TextSymbolizer with label information doesn't work.
-
03:09 AM Bug report #6410: expanded layer collapses when clicking on the 'ok' or 'apply' buttons from the ...
- Blocker should stay as it _did_ work in 1.7.4. Thanks for setting it up.
-
- nirvn - wrote:
> Giovanni, yes, it works fine in 1.7.4 and regressed in 1.8. I've just downloaded a 1.7.4 build to ma... -
- Giovanni, yes, it works fine in 1.7.4 and regressed in 1.8. I've just downloaded a 1.7.4 build to make sure it worked...
2012-09-25
-
01:58 AM Bug report #6412 (Closed): gdalbuildvrt doesn't recognize chinese directory path
- Building a vrt from an input directory containing Chinese characters cannot complete. It returns an error that the d...
-
- So this worked fine in 1.7.4 and regressed in 1.8?
-
- When clicking on the Layer Properties window's 'OK' or 'Apply' buttons, the layer item being edited will collapse (in...
-
- (Closed as duplicate of issue #5768)
-
- (Closed as duplicate of issue #5768)
-
- It's a duplicate .. maybe better to close it to help dev's reduce noise in this bugtracker. Giovanni, opinion?
-
- Ah, so I couldn't remember when it regressed because it never did regress :o)
Regis, glad to hear this feature is be... -
- Hi all,
I've never seen this working. see: #5768, #5960, #3402 , #6237..
Theses features are currently being sponso... -
- is this a regression from 1.8? or it used to work in master and then stopped?
-
03:53 PM Bug report #6408: Please migrate plugins from old to new repo
- Usual reason - lack of time?
-
- Paolo Cavallini wrote:
> I think there is a general agreement on moving the plugins from old to new repo - it's a sim... -
- I think there is a general agreement on moving the plugins from old to new repo - it's a simple backend replacement a...
-
- Bernd Vogelgesang wrote:
> > But it's not a qgis issue...
>
> well, but "qgis" changed its policy, and now functiona... -
- Table Manager has been migrated
-
09:46 AM Bug report #6408: Please migrate plugins from old to new repo
- > But it's not a qgis issue...
well, but "qgis" changed its policy, and now functionalities are lost.
it may be disc... -
- Paolo Cavallini wrote:
> Maybe yes, but:
>
> * not all missing plugins have a bugtracker
> * I believe this is a g... -
- Maybe yes, but:
* not all missing plugins have a bugtracker
* I believe this is a general issue, that can be solve... -
- Shouldn't that be filed in the trackers of the missing plugins?
-
- Plugins from old repos are now de facto unavailable for new users. Please move them to the new repo. Only deprecated,...
-
02:08 PM Bug report #6176: When adding postgis layer the build query feature doesn't work
- I just realised that the layer that the problems is "view" of a proper table
eg
CREATE OR REPLACE VIEW test_view a... -
- when plot from a layerwms using the tile method.
The actual qgis-dev version don't show anything.
So the user must w... -
- OK, got it better. It tried to type 'NULL', but I couldn't make it saved correctly in Postgis. I'm not able to reprod...
-
- regis Haubourg wrote:
> manually removing a value still writes a zero length string and not a null value..
But that'... -
- Sorry,
manually removing a value still writes a zero length string and not a null value.. -
- regis Haubourg wrote:
> testing today with 7ce99b8, postgres 9.1, postgis 1.5, I see a regression on that important f... -
- Hi,
testing today with 7ce99b8, postgres 9.1, postgis 1.5, I see a regression on that important feature.
Anyone con... -
- Hi,
testing today with 7ce99b8, postgres 9.1, postgis 1.5, I see a regression on that important feature.
Anyone con... -
- edit: replaced code in last comment
-
- Ah, of course. This is what I was trying to achieve:...
-
- Oops. That should just be this:...
-
> That is what I am starting to think also. Before I nuke my system and do a clean install, is there any way to effe...-
- I'm not 100% sure, but I *think* this happened on the several occasions when it occurred:
- I opened the project and ...
2012-09-24
-
- Oh, this works. The only issue is that it always toggles the visibility of the console. This is not desirable - eit...
-
- Alister wrote:
> The big problem is that it only works if the QGIS Python console is open before the project is opene... -
- Alister wrote:
> But what would be best?:
1. saving a separate command history per project
2. saving a separate comma... -
- Hi,
Salvatore Larosa wrote:
> If so, you can save/open history file by "save script file/open script file" button!
... -
03:52 PM Feature request #6397: save and restore the command history in the Python console
- Hi Alister,
Are you using the new python console?
If so, you can save/open history file by "save script file/open sc... -
- Sometimes when I open a different project and QGIS asks if I want to save the current project, and I say yes, it adds...
-
- Note: the macros are disabled when not using "File>Open Project" even if "Settings>Options>Enable Macros" is set to a...
-
- When you open a project that has project macros, if you open it via "File>Open Project", then a notification is displ...
-
- Not sure when this regressed. With latest nightly build, QGIS fails to provide count numbers to layer's labels define...
-
07:09 PM Bug report #6404 (Closed): Too many layers -> unknown exception
- Relates to issue 4013.
#4013
Project has about 85 vector layers (from the filesystem). When trying to add a new laye... -
05:53 PM Bug report #6392: CRS not recognized when opening raster file that contains one
- Giovanni Manghi wrote:
> > Sad to report that the exact same behavior is still present. It is still forcing the CRS t... -
- Magnus Homann wrote:
> Hav you tried running the program 'crssync'? It's in the qgis lib direcotry. You might have to... -
04:06 PM Bug report #4634 (Reopened): [PATCH] New labelling engine: wrong label placement with both "aroun...
- Hi,
I have reopened this issue because the method used is no longer the GEOS centroid calculation that previously fi... -
- Ian,
Should be fixed with commit commit:e0e57b5 but please compile (or wait for nightly) and test, as that commit si... -
10:22 AM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
- Jason Matney wrote:
> Problem fixed!
How did you solve it? I'm getting the same issue with QGIS 1.8 on Ubuntu 11.10. -
- IMHO the behaviour is almost correct: the correct state is saved. The only minor issue is that it is saved as top lef...
-
- I test better.
I see the availability of the options position and dimension.
But almost on windows it seem don't work... -
- Hi,
I notice when ask to the composer to set the extent to the map-extent it
draw starting from top.
This is more com... -
06:59 AM Bug report #6396 (Closed): Forward transform error is not handled gracefully
- Fixed in commit:add0ebcc1e124b38b08ed55eb81a1adf9f0554ed
-
- I'm also unsure about the intended behaviour of the option. Perhaps if specified the bar should always be of the sele...
-
02:54 AM Bug report #6402 (Closed): DB Manager and Varchar field lengths
- DB Manager reports that my varchar fields are 4 characters longer than they actually are. PGAdmin reports the correct...
2012-09-23
-
-
- Giovanni Manghi wrote:
> tested on 1.8 or master?
Master. Can anybody change the status back to "New"? -
- I can replicate.
-
- I can replicate.
-
- I can replicate.
-
- tested on 1.8 or master?
-
- To replicate, start a blank project and set the Project CRS to EPSG:2193, then try to load the attached file.
-
- At least on Windows, when there is a forward transform exception (like the message below), the mouse cursor changes t...
-
- Actually, I guess it would be better to simply enable it in the "Layer>New>New Shapefile Layer..." dialog (and rename...
-
- It would be good to have a menu entry "Layer>New>New DBF Table"
I think I remember seeing people ask for this feature... -
- Hav you tried running the program 'crssync'? It's in the qgis lib direcotry. You might have to set LD_LIBRARY_PATH al...
-
-
> Sad to report that the exact same behavior is still present. It is still forcing the CRS to EPSG:4326 and not rec... -
- Okay, got the Spatialite updated to v. 3.1.0-RC2 as noted below. Still getting the undesired behavior. Only differenc...
-
- I am also running AMD64 Ubuntu 12.04, however it is the Pinguy version. My versions are mostly the same except for "Q...
-
- Unfortunately, it works for me on Ubuntu 12.04 (amd64) and creates a user CRS. Here are my versions:
"
QGIS version
... -
- Giovanni Manghi wrote:
> it is definitely the gdal version. You don't need to compile to get qgis 1.8 and gdal 1.9, ... -
> Could possibly be a culprit. If you might suggest building against 1.9.x for my Ubuntu version could you also incl...-
> Could possibly be a culprit. If you might suggest building against 1.9.x for my Ubuntu version could you also incl...-
- The GPS tools plugin (gpsimporterplugin.dll) adds a menu entry "Layer>Create new GPX layer".
This should instead be "... -
11:09 PM Feature request #6398 (Closed): Attribute edit form dialog window shouldn't be modal
- Currently in QGIS vector feature attribute editing form window is modal. Such approach blocks following work flow:
... -
- It would be useful to be able to save and restore the command history in the Python console.
But what would be best?... -
- Alister Hood wrote:
> And if I manually edit a .qgs file to add the kmz layer like this, then QGIS can open it:
Eas... -
- Oh, I didn't see your reply, and had just found out about the libkml driver myself. It turns out there is a ticket f...
-
- Yes, I also noticed it doesn't work. But I'm unsure how it *should* work, so I haven't fixed it. :-) Ideas?
2012-09-22
-
- Giovanni Manghi wrote:
> please try share sample data, for example using dropbox or another virtual drive. Or just ma... -
- Magnus Homann wrote:
> What is the version of GDAL for each Qgis system? It shows in "Help -> About" menu.
There def... -
- What is the version of GDAL for each Qgis system? It shows in "Help -> About" menu.
-
- please try share sample data, for example using dropbox or another virtual drive. Or just mail it to me giovanni.mang...
-
- please try share sample data, for example using dropbox or another virtual drive. Or just mail it to me giovanni.mang...
-
- please try share sample data, for example using dropbox or another virtual drive. Or just mail it to me giovanni.mang...
-
- please try share sample data, for example using dropbox or another virtual drive. Or just mail it to me giovanni.mang...
-
- please try share sample data, for example using dropbox or another virtual drive. Or just mail it to me giovanni.mang...
-
- please try share sample data, for example using dropbox or another virtual drive. Or just mail it to me giovanni.mang...
-
- Hello, and please excuse me if I don't provide all the needed info. New to bug reporting, but trying my best.
I am r... -
- The wms raster (the maps from a wms server are substantially
raster) don't allow to set the pixel list.
It allow only...
2012-09-21
-
- Not really: just adding a map to an overview fails to show any map in about half of the cases
-
- For a couple of weeks now, click on the [ ] show in overview right-click menu item fails to update overview with the ...
-
- Closing this bug after verifying the problems raised in this issue have all been fixed by Radim's commits.
For the r... -
- Closing this bug after verifying the problems raised in this issue have all been fixed by Radim's commits.
For the r... -
- Fixed in changeset commit:"73fcb6625789055bf67225d1c3d44a1872cf5c2c".
Made it "more than or equal to" and "less than"... -
- The View>Decorations>Scale bar>Size of bar has a strange behaviour. It allows you to change the length of the scale b...
-
- The parameter Opacity works correctly for legends and other objects, not with maps.
BTW, is there a reason to call it... -
- This is QSpatiaLite error. Please submit such bugs to plugin bugtracker not to QGIS one
-
05:33 AM Bug report #6386 (Closed): QSpatialite plugin installation fault in QGIS master
- Installing qspatialit in QGis master terminat with fault:
The plugin depends on some components missing on your syste... -
- duplicate of #6381
-
- duplicate of #6381
-
06:37 AM Bug report #6387 (Rejected): MSSQL tables - Primary Key with multiple columns Problem
- Adding a table with multiple columns as primary key, QGIS is not recognizing both primary key columns, only the first...
-
03:10 AM Bug report #6384: QGIS QFS Server DescribeFeatureType : TYPENAME has not to be mandatory
- commit 0133ed20fc69d2857e135d12c5fa6257497782ed
-
- For the WFS DescribeFeatureRequest the parameter TYPENAME is optional.
In the actual implementation, TYPENAME is man...
2012-09-20
-
- Map overview seems broken (tested on 15 machines, various OSs, about half not working). I suspect this has been opene...
-
-
-
- Adding a table with multiple columns as primary key, QGIS is not recognizing both primary key columns, only the first...
-
-
02:45 AM Feature request #6325: Add PAL labelling features for Python access
- New issue created: #6378. I don't have permissions to close an issue - yet?
-
- commit 593da452193f31d3941b56a64369c692b866bf40
for patch V2 -
07:10 AM Bug report #6379 (Closed): HTML output does not work for Processing/GRASS modules
- *new description:*
see subject.
Outputting to file
OutputFile|outputtext|...
works
*old description:*
r.quanti... -
- Running the dev build (v1.9.0-66) of QGIS, using the PAL labelling tool from the Toolbar on a MultiPolygon layer with...
2012-09-19
-
- Piotr Pachol wrote:
> Error "Bad allocation" is connected with type of labeling used in layer.
> I tried to print pro... -
03:26 PM Bug report #4107: Bad Allocation when Printing
- Error "Bad allocation" is connected with type of labeling used in layer.
I tried to print project with several layers... -
- Currently there is no way to interactively select the path to the file with the reclass rules, for use with r.reclass...
-
- See also: http://gis.stackexchange.com/questions/32082/can-qgis-open-kmz-files
Summary: On a Mac, where QGIS uses th... -
- See also: http://gis.stackexchange.com/questions/32082/can-qgis-open-kmz-files
Summary: On a Mac, where QGIS uses th... -
10:10 AM Bug report #6375 (Closed): svg and simple symbol mix do not scale the same way
- When a marker symbol is composed of a simple symbol and a svg symbol, if marker scale option is set to «area», then t...
-
- Same here.
Note that subcomponents of the symbol keep the right size (so it's rendered ok), but the main component si... -
- When data defining font size the PAL layer-level font size appears to be used for initial calculation of label placem...
-
- Hi Ian,
Sounds like a bug that may have been caused by some recent code I've added. Please create a new issue (bug) ... -
- Larry
The layer I was testing is a MultiPolygon, some of the features have multiple parts, it is a postgres layer an... -
07:24 AM Bug report #6360: no data value (defined in the "transparency" tab of the raster property window)...
- It is now possible to disable original nodata value.
I think that everything should work OK. -
05:34 AM Bug report #6371 (Closed): Query layer from DB Manager can not be displayed
- After generating results from query builder, I was unable to add it to the canvas.
The same process works under Linux... -
- hamish - wrote:
> I had to change the geometry_columns type to MULTILINESTRING instead of LINE,
Was that originally ... -
04:00 AM Bug report #6232: Postgis add layer dialog: Cancel slow operations
- Hi,
just as a point of info for anyone in the same situation as me:
I had to change the geometry_columns type to MU... -
- regression confirmed. who is the maintainer?
2012-09-18
-
12:27 AM Bug report #6340: Qgis Server - Get capabilities does no show embedded layers
- thanks Marco for fixing it. I must take time to recompile qgis master, and will report back if necessary
-
- Always representing with wider data type allows -1 to be used, but we probably also need a way to change the default ...
-
- I see. With QGIS master (prior to commit 3032f71666), I could manually change nodata value via editing of .xml to -1 ...
-
- The problem is that we need at least one nodata value, if a layer is reprojected, we need to represent pixels outside...
-
- Oups, re-opening as above commit made the situation somewhat worse.
Your commit allowed to specify an additional no ... -
- Oups, re-opening as above commit made the situation somewhat worse.
Your commit allowed to specify an additional no ... -
- Oups, re-opening as above commit made the situation somewhat worse.
Your commit allowed to specify an additional no ... -
- Oups, re-opening as above commit made the situation somewhat worse.
Your commit allowed to specify an additional no ... -
- Radim, I've changed status to closed and resolution to fixed as this issue did cover a bug which you fixed (thanks!) ...
-
- Radim, I've changed status to closed and resolution to fixed as this issue did cover a bug which you fixed (thanks!) ...
-
- Radim, I've changed status to closed and resolution to fixed as this issue did cover a bug which you fixed (thanks!) ...
-
- Radim, I've changed status to closed and resolution to fixed as this issue did cover a bug which you fixed (thanks!) ...
-
- The user defined no data value was not applied correctly in master until commit:3032f71666.
But, I think that it is ... -
- Giovanni, I'll soon attach a cropped version of the ECW (currently +/- 70mb) I used in the above screenshot for devs ...
-
- nirvn - wrote:
> Yes and no:
> - Yes it's a regression as setting a value other than 0 with qgis 1.8 does have a visi... -
- Yes and no:
- Yes it's a regression as setting a value other than 0 with qgis 1.8 does have a visible impact on the h... -
- Is this a regression in master since 1.8?
-
- Is this a regression in master since 1.8?
-
- Is this a regression in master since 1.8?
-
11:30 PM Bug report #5345: Problems with PATH-Variables in msys.bat and OSGeo4W
- After testing a bit around with quotation marks, I made the following changes to osgeo4w.bat:...
-
- Of course, the obvious workaround is to rename the .kmz to .zip
-
- Also, shouldn't the category for this ticket be data providers, not vectors?
-
- FWIW, gdal/QGIS can already open a KMZ file, using the vsizip driver:
e.g.... -
- - enable relative save paths in the project settings
- load some layers from a zip file
- save the project in the sam... -
03:53 PM Bug report #6368 (Closed): Not all Features in Personal GDB layer showing up in QGIS 1.8
- I have a point layer stored in an ESRI Personal GDB. The layer contains 431 features. When I load this layer into Q...
-
- Ian Packham wrote:
> Managed to set some attributes of PAL from python, although not tested everything. Setting @paly... -
- Sorry, I was looking for it, but I missed your missed commit file. Got the build working OK with python-qscintilla.
... -
- Ian Packham wrote:
> I also added the qscintilla package under Libs, but this didn't help.
Try python-qscintilla.
>... -
- That was fast, thank you.
Would this commit be included in the qgis-dev nightly builds of the master (available in t... -
08:21 AM Bug report #6366 (Closed): Check QGIS Version
- When 'Help' -> 'Check QGIS Version' is chosen, the following message appears:
"You are running the current version o... -
06:31 AM Feature request #6365 (Open): Raster calculator: set extent and cell size dinamically
- Using the raster calculator in order to clip a raster users have to insert the layer extent manually (if another rast...
-
- René-Luc ReLuc wrote:
> In addition to indicate the geometry type in the DescribeFeatureType request, this patch adds...
2012-09-17
-
- In addition to indicate the geometry type in the DescribeFeatureType request, this patch adds boundedBy to FeatureCol...
-
11:04 PM Feature request #6361: Edit widget “Unique values”
- May be “_Value Collection_” is more appropriate name for the given widget.
-
- There is a possibility in the layer properties window, Fields tab to define Edit widgets. One of them is just opposit...
-
- QGIS master, i.e. what will become 2.0, has an issue whereas it is not applying the no data value defined by the user...
-
- Also,
It seems that people coming from ArcGIS tend to expect "Specify CRS" to do something completely different. Ra... -
- See also #4079-23 and
http://osgeo-org.1560.n6.nabble.com/Add-ST-MakeValid-functionality-to-QgsGeometry-td5002449.... -
- See also #4079-23 and
http://osgeo-org.1560.n6.nabble.com/Add-ST-MakeValid-functionality-to-QgsGeometry-td5002449.... -
- Hello,
have tested the labeling in polygons with intersection fault.
Labeling is correct in section advanced, Placeme... -
- Hello,
have tested the labeling in polygons with intersection fault.
Labeling is correct in section advanced, Placeme... -
- Hello,
have tested the labeling in polygons with intersection fault.
Labeling is correct in section advanced, Placeme... -
- See also #4079-23
and
http://osgeo-org.1560.n6.nabble.com/Add-ST-MakeValid-functionality-to-QgsGeometry-td50024... -
- gespiel - wrote:
> Hi,
>
> see also #2949
> It seems to be fixed?
>
> Gerhard
no, it works for lines, but it fails... -
- Hi,
see also #2949
It seems to be fixed?
Gerhard
-
- This functionality now exists in master branch. Please reopen if necessary. Any issues with current functionality sho...
-
- Hi,
As to Toni Keskitalo, this is also happening to me in 32bit version (Xubuntu 12.04 with QGIS master from ubuntug... -
- I'm closing this for now. Pleas reopen if it persists. Thanks for the help!
-
- Is this still confirmed?
I cannot confirm this with a very similar project setup, but under Windows instead of Andro... -
- Is this still confirmed?
I cannot confirm this with a very similar project setup, but under Windows instead of Andro... -
- Hello,
perfect!
Thank you verry much.
Gerhard -
07:21 AM Feature request #6356 (Open): Set from parent style into categories rules
- Using new symbology
Using Styles with rules, and categories.
I want to have option on categories rules to not set co...
2012-09-16
-
12:24 AM Feature request #6354 (Open): WMS layer using VIEWPARAMETERS
- We have found it to be impossible to add WMS layer using VIEWPARAMETERS in Qgis Desktop.
There is no fields to add s... -
- nirvn - wrote:
> Giovanni, a silent unexplained failure is _not_ a good UX in any kind of way :)
of course, I was j... -
- Giovanni, a silent unexplained failure is _not_ a good UX in any kind of way :)
I think there could be great benefi... -
> In other words, I think maybe it should stay as is, and a different approach to creating alternative label backgro...-
- Giovanni Manghi wrote:
> I made a few tests and to me it does not make a lot of sense to allow the user choose a buff... -
- What exactly does this mean? Is it essentially the same as #2402?
-
- Also see #2402 and possibly #3122
-
- Also see comment by Christine at #5546
-
- > Observed also an absurdity with field definitions: e.g. a field definition created in QGIS with REAL, length 10, pr...
-
- > If I do this the results are shown with many decimal places, regardless of the precision of the output field!^:
$x
... -
- (Perhaps I should have reopened #3606 - what is the protocol around here?)
- Use the Field calculator to write e.g. 9... -
- - Open the field calculator.
- Type @9/17@ as the expression. There is no preview.
- Type @$area@ as the expression.... -
- > I'm guessing the field calculator would allow you to do the same thing, but I haven't tested it.
Using the field c... -
- Hi Alister,
With recent changes, 'around' and 'offset' have their centroids converted to points (via GEOS) before ... -
- I see that now it is labelled when labelling with "around centroid", just not with "free".
-
- > The "missing" labels are easy to explain: that polygons missing the label (in the attached picture) are not feature...
-
- > The "missing" labels are easy to explain: that polygons missing the label (in the attached picture) are not feature...
-
- Alister Hood wrote:
> I've just heard a report from someone using QGIS 1.8 of the same problem as in my last comment ... -
- I've just heard a report from someone using QGIS 1.8 of the same problem as in my last comment - I'll open a new tick...
-
- I've just heard a report from someone using QGIS 1.8 of the same problem as in my last comment - I'll open a new tick...
-
- I've just heard a report from someone using QGIS 1.8 of the same problem as in my last comment - I'll open a new tick...
-
- - Load a shapefile, open the attribute table and enable editing.
- Add a column, fill in values manually, click the s... -
- Hi Giovanni,
I reopened this because only the 'show all labels' is currently saved per layer. All the settings for t... -
- Hi Giovanni,
I reopened this because only the 'show all labels' is currently saved per layer. All the settings for t... -
- Seems fixed on master.
-
- Seems fixed on master.
-
- Ian,
Jürgen added the Python bindings with commit commit:d8675ba3 (and follow up commit)
Please test. I have tested... -
- Ian,
Jürgen added the Python bindings with commit commit:d8675ba3 (and follow up commit)
Please test. I have tested... -
- Ian,
Jürgen added the Python bindings with commit commit:d8675ba3 (and follow up commit)
Please test. I have tested... -
03:41 PM Feature request #5382 (Closed): Point Sampling Tool: Speed up by simply not writing fields and re...
- I've created the subproject and moved this ticket to #6350
-
- I've created the subproject and moved this ticket to #6350
-
- Between the above noted commit and commit commit:d83b618 this should now work as expected. New issues with existing f...
-
- Between the above noted commit and commit commit:d83b618 this should now work as expected. New issues with existing f...
-
- > This issue should remain open until data defined rotation, independent from data defined x/y, can also be used in c...
-
- > This issue should remain open until data defined rotation, independent from data defined x/y, can also be used in c...
-
- Patch added.
-
- Patch added.
-
- it works on qgis master.
-
- it works on qgis master.
-
- Sandro Santilli wrote:
> Alright, I did hit one of those drawbacks pretty easily :)
> That was: ST_Intersection retur... -
- Alister Hood wrote:
> If I read correctly, this is a problem with "old labelling", so will not be applicable when "ol... -
- Alister Hood wrote:
> If I read correctly, this is a problem with "old labelling", so will not be applicable when "ol... -
-
-
- duplicate of #3652 (there are more notes there)
-
- duplicate of #3652 (there are more notes there)
2012-09-15
-
- Can you add a use case to explain how the horizontal offset would be useful?
-
- Can you add a use case to explain how the horizontal offset would be useful?
-
- Can you add a use case to explain how the horizontal offset would be useful?
-
- Can you add a use case to explain how the horizontal offset would be useful?
-
- Can you add a use case to explain how the horizontal offset would be useful?
-
- Larry Shaffer wrote:
> Giovanni Manghi wrote:
> > ... What about my above suggestion (above a certain size render the... -
- Larry Shaffer wrote:
> Giovanni Manghi wrote:
> > ... What about my above suggestion (above a certain size render the... -
-
- With the lastest changes in labelling code this seems to be fixed, at least the "strange label location" issue. The "...
-
- At least with the latest changes in the labelling code this seems fixed. Reopen if necessary, but attach sample data.
-
- At least with the latest changes in the labelling code this seems fixed. Reopen if necessary, but attach sample data.
-
- At least with the latest changes in the labelling code this seems fixed. Reopen if necessary, but attach sample data.
-
- At least with the latest changes in the labelling code this seems fixed. Reopen if necessary, but attach sample data.
-
- At least with the latest changes in the labelling code this seems fixed. Reopen if necessary, but attach sample data.
-
- at least I would consider it a good way to know that I have a self intersecting geometry :)
-
- at least I would consider it a good way to know that I have a self intersecting geometry :)
-
- With the latest changes in the labelling code, this seems fixed.
-
- With the latest changes in the labelling code, this seems fixed.
-
- With the latest changes in labelling code this seems fixed.
-
- With the latest changes in labelling code this seems fixed.
-
03:02 AM Bug report #6340 (Closed): Qgis Server - Get capabilities does no show embedded layers
- I think this is fixed in 1b803d73e513be5835533b400a79f6f502e3d4f5. Please reopen if not.
2012-09-14
-
- Fixed in 1880db0e774d6533c0173a04db7b32107510e8c2
-
-
- Fixed in commit c0ee7f0ee99a1a57e067623cb762ee5e0fcf545f
-
- This affect only qgis master:
* add a point vector layer
* make a categorized symbology
* open the symbol selector... -
- > Yes, I already did, but I am a little confused about how that page is supposed to work now.
>
> Apart from the two... -
- Magnus Homann wrote:
> Does your test project for #5895 crash also?
just tested the latest master with the data atta... -
03:04 AM Bug report #6218: Loading styles issue
- If I change the QML file such that:
<renderer-v2 attr="RANDOM_COLUMN_NAME" symbollevels="0" type="categorizedSymbol">...
2012-09-13
-
- In QGIS Server 1.8 (ubuntu 12.04)
* create a master project with layers
* create a "child" project with embeded layer... -
12:39 AM Feature request #6339 (Closed): No way to select CSV file encoding in DelimitedText Plugin
-
- Does your test project for #5895 crash also?
-
- Magnus Homann wrote:
> Thought it was a transform error, but more of a GPS general error it seems. Don't have any GPS... -
- Thought it was a transform error, but more of a GPS general error it seems. Don't have any GPS to test with, so I'll ...
-
- Magnus Homann wrote:
> I fixed some crashes, does this still persist?
ummm... yes. Before it sent the message and th... -
- I fixed some crashes, does this still persist?
-
- The EPSG code is not in proj.4 database, where we automatically get our data from.
-
- It seems to work now, I have gdal 1.9.1. I can see a difference when setting different projections for the layers. Sa...
-
- It seems to work now, I have gdal 1.9.1. I can see a difference when setting different projections for the layers. Sa...
-
- It seems to work now, I have gdal 1.9.1. I can see a difference when setting different projections for the layers. Sa...
-
- Magnus Homann wrote:
> This seems to be applied in master.
it seems so, now it is usable and does not freeze even if... -
- This seems to be applied in master.
-
09:35 AM Bug report #6338 (Closed): qgis server doesn't work with custom CRS
- Hi,
Qgis Server don't work with custom CRS. I'm trying to visualize a project I realized with custom CRS but Qgis sa...
2012-09-12
-
- Magnus Homann wrote:
> Thought I fixed it, but a lot of out of memory errors cropped up. :-)
thanks a lot indeed!
-
- Thought I fixed it, but a lot of out of memory errors cropped up. :-)
-
- Great!!! Thank you Magnus, your patch is perfect! From now, planetary geology is finally totally free from non open-s...
-
02:22 AM Bug report #4216: error editing dbf over ssh / sftp
- Thanks for keep this in the agenda.
2012-09-11
-
- Seems to have been opened by mistake. If not, please explain.
-
- Seems to have been opened by mistake. If not, please explain.
-
08:20 PM Bug report #6334 (Rejected): print composer - add a tsblr
-
- the option "show only visible features" works only if shape file and view are in the same SR. on the fly reprojection...
-
- no backports to 1.8 - closing.
-
- Seems autocompletion don't work for some "complex" cases. For example, when I try to enter next code...
-
07:58 AM Bug report #6327: non-ASCII character corruption in shapefile
- Everything seems to work much better if I choose the option "Ignore shapefile encoding". What does this new option do...
-
- One is forced to kill QGIS in this case
-
- For the record, this issue is not affecting QGIS 1.8.
As for applying patches, this is a good starting point: https:... -
- Magnus Homann wrote:
> Hmm, I found an error when zooming out, but that was due to a division by zero in raster code....
2012-09-10
-
- Peter Rodgers wrote:
> Hi Larry/Nirvn,
>
> I'm not new to GIS but am new to Quantum GIS. Im running version 1.8 Lisb... -
09:59 PM Bug report #6315: new labelling engine stopped placing label within visible polygon area
- Hi Larry/Nirvn,
I'm not new to GIS but am new to Quantum GIS. Im running version 1.8 Lisboa.
Please could you point... -
- The above referred commit did fix the regression, and added a new feature as a bonus. Closing.
-
- The above referred commit did fix the regression, and added a new feature as a bonus. Closing.
-
- The above referred commit did fix the regression, and added a new feature as a bonus. Closing.
-
09:45 PM Bug report #5911: Language Driver ID in dbf file of new shapefile
- Sorry,
Testing it again today, I don't experience any character corruption of shapefiles generated via both "Save ve... -
- See also, for background: http://gis.stackexchange.com/questions/32847
-
- Sorry, I have created this issue under the wrong category - should be under "Labelling". I cannot change the category...
-
- The new PAL Labelling system looks to be superseding the old one (now shown as deprecated under Layer Properties). Co...
-
- Hmm, I found an error when zooming out, but that was due to a division by zero in raster code. The error sent a "NaN"...
-
08:28 AM Bug report #6240: Editing: Delete last Vertex crashes QGIS
- Sorry we can't test this on actual version of master at the moment.
Does anybody else has the chance to test it?
Than... -
- The non-ASCII characters seem to be corrupted on a new shapefile. Steps to reproduce:
* Create a shapefile, choosing ... -
06:30 AM Feature request #6326 (Open): Displacement line between original point and displaced diagram
- When using pie chart diagrams: diagrams will re-placed according some rules. There should be option when you can draw...
-
- Matthias Kuhn wrote:
> If you think that there should be an option to connect points to charts, please file a featur... -
- Patch included in
847cae91118b6046ece0e06ea3103fe59467832f
and seeems to work! Thanks!
2012-09-09
-
- Attached a screenshot that shows how the Arc* GUI is made (to allow select more than 2 input files). I guess that und...
-
- Attached a screenshot that shows how the Arc* GUI is made (to allow select more than 2 input files). I guess that und...
-
- see also #6058
-
- This can be somehow related to #6318, an issue that affects Windows and that I still have to check under Linux.
Rega... -
- This can be somehow related to #6318, an issue that affects Windows and that I still have to check under Linux.
Rega... -
- This can be somehow related to #6318, an issue that affects Windows and that I still have to check under Linux.
Rega... -
- This can be somehow related to #6318, an issue that affects Windows and that I still have to check under Linux.
Rega... -
01:28 AM Bug report #6324 (Closed): MS SQL Server doesn't read 3D geometries correectly
-
- It is now even worst is using Postgis 2.0
-
- The image shows rendering with a "marker on every vertex" style of this geometry:...
2012-09-08
-
- I was trying to add in "GPS Device Editor" the necessary strings to allow me download the tracks from a usb and bluet...
-
05:04 AM Bug report #6068 (Closed): User speficied settings not portable with [--configpath] boot option u...
- Fixed in changeset commit:"4a9a9f7dbb97d12f2b29237ec97fb7f93a9f2535".
2012-09-07
-
- Jef's fix is good at reading shapefiles and creating new shapefiles, so the issue of this ticket has been fixed. Howe...
-
- Larry, that was fast :) -- I'll confirm the behavior fix as soon as osgeo4w gets an updated trunk build.
This is gre... -
- Hi nirvn,
Please test commit commit:f143507 and see if this fixes your issue. It brings back the visible polygon def... -
- Also, the centroid for some polygons will be calculated to lie outside of the polygon. There is currently no an optio...
-
- Hi nirvn,
Indeed, 'big regression' is an accurate way of describing that loss of functionality. I have confirmed you... -
- There's been a recent wave of fresh improvements to the new labelling system, and that has been fantastic!
However,... -
- i think it could be useful to set how many columns the legend should have, mantaining together all elements of each l...
-
11:13 AM Feature request #5371: Please improve the sponsors dialog
- What about inserting the Sponsors into the About again and just copying the HTML from the Webpage there and Exchange ...
-
-
- I can confirm!
The result expected of "streams_f_bufd" UNION "nests_f_buf_single" should be:... -
- I can confirm!
The result expected of "streams_f_bufd" UNION "nests_f_buf_single" should be:... -
- I can confirm!
The result expected of "streams_f_bufd" UNION "nests_f_buf_single" should be:... -
- I can confirm!
The result expected of "streams_f_bufd" UNION "nests_f_buf_single" should be:... -
08:57 AM Bug report #4567: Ftools - Union returns Wrong Table of Attributes
- Hi Salvatore,
thanks for your quick reply. The test datasets are not big, please find them enclosed (the buffered str... -
- Bernd Eversmann wrote:
> 2) After the union, all id values end up in the id column, the the second id field (id_1) re... -
- Hi all,
the union command works fine now with small testcases, I tested with two polygons having one overlap: everyt... -
- Hi all,
the union command works fine now with small testcases, I tested with two polygons having one overlap: everyt... -
- gespiel wrote (in separate posts):
>It should be good to add a data defined 'Rotation' field in the 'Offset from poin... -
-
06:24 AM Bug report #6317 (Closed): Regression: Scalebar alignment broken in Print Composer
- In current master, the scalebar alignment is broken. The scalebar is always left aligned, regardless of the setting.
... -
- Magnus Homann wrote:
> OK, I think it's the WMS that is the key to the issue. IS there a simple WMS server where I ca... -
- OK, I think it's the WMS that is the key to the issue. IS there a simple WMS server where I can reproduce this on?
-
- Magnus Homann wrote:
> Does this happen still? Do you have an exampl layer that this happens on?
yes, I just tested.... -
- Would it be possible to add an option to the Layer / Right click menu to open the folder of a layer that comes from a...
2012-09-06
-
- Fixed in 9b58fe2
-
- Fixed in 9b58fe2
-
- There is one problem. The format may be changed after the file was selected. What should then happen? The vector save...
-
- michele zanolli wrote:
> ...
> If you try the attached test layer from trapanator, you can see that some labels are s... -
> But I have another comment...
>
> If you try the attached test layer from trapanator, you can see that some label...-
-
- you can close this issue, we will continue in #6302
-
- René-Luc ReLuc wrote:
> Giovanni the information about DescribeFeature has to be added to the new bug #6302
done
> ... -
-
- The DescribeFeature Request is different in Mapserver and QGIS server. The Mapserver service works fine also on Arcgi...
-
-
-
- Do you mean multiple columns legend with optional number of columns or just legend items in a single line?
-
- The problem are the missing .csv layers you have in your project. Try remove them manually and you will see that qgis...
-
- The problem are the missing .csv layers you have in your project. Try remove them manually and you will see that qgis...
-
- The problem are the missing .csv layers you have in your project. Try remove them manually and you will see that qgis...
-
- The problem are the missing .csv layers you have in your project. Try remove them manually and you will see that qgis...
-
- The problem are the missing .csv layers you have in your project. Try remove them manually and you will see that qgis...
-
- The problem are the missing .csv layers you have in your project. Try remove them manually and you will see that qgis...
-
- The problem are the missing .csv layers you have in your project. Try remove them manually and you will see that qgis...
-
09:18 AM Bug report #6313 (Closed): C++ Runtime error when opening project
- I recently moved to a new computer and I can't open any of my old project files.
My windows user folder is identical... -
- The case-insensitive sort fix for the encoding list is done with commit commit:652deba
The category for the issue sh... -
- The problem I see is that when zooming out, pies become larger. I admit this is a corner case, possibly meaningless i...
2012-09-05
-
12:51 AM Bug report #6312: New diagrams: zooming out creates large, out of context pies
- As far as I can see, these pies are placed by the PAL engine. The
easiest solution would be to check if one of the fo... -
- See attached
-
- Does it happen directly, or what steps is necessary to reproduce it?
-
- Does this happen still? Do you have an exampl layer that this happens on?
-
- You can now specify the ellipsod with custom parameters. The project projection should match.
-
- You can set your own ellipsoin now in Options -> Map tools. You should also set the project projection to the same el...
-
01:18 PM Feature request #6309: Alphabetize all drop down menu lists
- Hi Larry - no worries about a backport! I'll reclassify the ticket & make it specific to the encoding drop-down if yo...
-
- Jeffrey,
I have found most popup menus in QGIS are similar to your hybrid example, or are already alphabetized if se... -
- Ugh! How embarrassing - misspelling in the bug title! ; )
Larry - thanks for the speedy reply - can't believe I miss... -
- Hi Jeffrey,
As far as I can tell, the Encoding popup menu in the save dialog _is_ alphabetically sorted (Mac 10.7.4,... -
- Saw a past ticket on a similar item, but "Encoding" drop-down in Vector -> Geoprocessing Tools -> Buffer is way out o...
-
11:20 AM Feature request #6308: Add Proxy server for OnlineResource GetCapabilities to Qgis Server projects
- Ops, yes it is what I meant :)
Sorry, I didn't notice it. -
- You can insert the url that should be shown in the capabilities document (in your case the proxy url) into project pr...
-
- It would very useful to have an OWS option inside Qgis projects to indicate proxy servers for Qgis Server.
Currently ... -
- I'm not sure what % of geoprocessing workflow cases this covers, but I believe the following multiple clicks (steps 2...
-
06:59 AM Feature request #6307 (Closed): Add font color option to legend in print composer
- While it's possible to change the background color of the legend, it's impossible to change the text color - it's alw...
-
- Fixed in master.
In ToolBox "position" choose "PAL engine settings" and enable "Show all labels and features".
Smal... -
- Fixed in master.
In ToolBox "position" choose "PAL engine settings" and enable "Show all labels and features".
Smal... -
- Fixed in master
-
- Fixed in master
-
- Fixed in Changeset commit:8f891c5e742205e095b8ae8daddc6213eef0e5e2 and commit:1497cbbabc7be5c3e980cc72699c320e045005bd
-
- Fixed in Changeset commit:8f891c5e742205e095b8ae8daddc6213eef0e5e2 and commit:1497cbbabc7be5c3e980cc72699c320e045005bd
-
- Merged to master
-
- Merged to master
-
- The line option is only available for layers containing line features.
In the current master, the option is disabled...
2012-09-04
-
-
- 5c933cd6ea was applied to master as commit:eb93568f7 and consequently upgraded to new stats API.
Standard deviation ... -
- Giovanni Manghi wrote:
> The DescribeFeature Request is different in Mapserver and QGIS server. The Mapserver service... -
- Giovanni the information about DescribeFeature has to be added to the new bug #6302
This one concerning GetCapabilit... -
12:15 AM Bug report #4634: [PATCH] New labelling engine: wrong label placement with both "around centroid"...
- My test says that the bug is fixed, thanks a lot!
But I have another comment...
If you try the attached test layer ... -
-
- Should be fixed for 'over centroid' (now called 'Offset from centroid') with commit commit:61a50225
'Around centroid... -
- Thanks Larry
-
- Thanks Larry
-
-
- Should be implemented for point and centroid features with commit commit:61a50225 (no implementation for other types ...
-
-
- The function was added by NathanW in this commit https://issues.qgis.org/projects/quantum-gis/repository/revisions/fb...
-
- Fixed in changeset commit:"1e1cdb83b3f06a012b763464195d4791b820fa9f".
-
- Oh - I see I pasted the wrong link.
I should have said I guess it should be changed to https://issues.qgis.org/wiki/q... -
- Hi,
I've implemented a version of this in commit commit:a584a9a
It works very well for instances where you need to ... -
- Hello,
have tested it with revision 9e9d1ce.
Offset from point functions. It is only possible to rotate all labels w... -
- Hello,
have tested it with revision 9e9d1ce.
Offset from point functions. It is only possible to rotate all labels w... -
- Should be implemented with commit commit:61a50225
Please test. -
-
- Should be fixed with commit commit:61a50225
Please test. -
- Should be implemented with commit commit:61a50225
-
-
12:18 PM Bug report #5256: QGIS polygon Centroid (NewLabeling bug etc)
- fixed by @dakcarto https://github.com/qgis/Quantum-GIS/pull/201#commitcomment-1797294
-
12:08 PM Bug report #4844: Multiline Labels - handling of Carriage Return / Line Feed characters
- Shoot, sorry Nathan, I forgot this one was still floating out there. The new labeling in 1.8 is fantastic. In terms...
-
- I find the default interpolation (discrete) fairly annoying, as it is little used, and gives headaches to newbies. Pl...
-
11:11 AM Bug report #5031: QGIS pull down menus items appear halfway on my second monitor
- this can be closed, no longer an issue
-
- All except field calculator should be consitent now. Work is ongoing.
-
- Fixed in a4412828404330434e3378898b22f380ab5648ce
-
- After the resolution of #6116, Giovanni Manghi testing QGIS WFS Server with GvSIG, uDIG and ArcGIS.
ArcGIS doesn't r...
2012-09-03
-
- Works fine now - Thanks a lot!
-
- It should be fixed in commit:e5389212
Please verify and close.
-
- Works fine now - Thanks a lot!
-
03:28 PM Bug report #3743: [OsX] Georeferencer: can't set map coords from map canvas, and other odd behavior
- Olivier redlead wrote:
> I'm not sure if the problem is the same (seems simpler here) :
Yes, that's the same problem... -
- Apparently, the option to make cubic interpolation for overviews is missing from GDALTools interface. Looks an esy fix.
-
- Here is screen snapshot: http://gis.stackexchange.com/questions/32591/how-to-draw-lines-for-diagrams
-
- Hi,
When drawing Pie Charts with Diagrams: section Position, placement Aroundpoint.
Diagrams are nicely drawn arou... -
-
- Marco,
At least Windows version (1.9.0 - master / revision 6a0d2f5) work as I exptected. So, I presume we can close ... -
- evis creates a delimited text file, which gets deleted after closing the program. If I save it before closing, and re...
-
-
- Yes, it is a delimited text file, which gets deleted after closing the program. If I save it before closing, and rest...
-
02:36 AM Bug report #6299 (Closed): Sextante output do not have the same Encoding as the inputs
- If I select as an input a layer with special characters such as "´", "~", "`" etc the output of any Sextante tool rep...
-
- Please post your question in the users mailing list. If then a bug is confirmed use the bug tracker to report it. Tha...
-
- Please post your question in the users mailing list. If then a bug is confirmed use the bug tracker to report it. Tha...
-
02:07 AM Bug report #6298 (Rejected): Gdal Tools and OSX Mountain Lion (OSX 10.8.1)
- Our student had the following problem, after migrating to OSX 10.8.1, who is missing their raster menu items:
??Afte... -
- Tamas Szekeres wrote:
> Fixed in changeset commit:"c322cd52cf82afeb10beefa6efa42da2bdcea46f".
Port setting is now sp... -
- Fixed in changeset commit:"c322cd52cf82afeb10beefa6efa42da2bdcea46f".
-
- Tamas Szekeres wrote:
> Fixed in changeset commit:"c322cd52cf82afeb10beefa6efa42da2bdcea46f".
This change should eli... -
- Fixed in changeset commit:"c322cd52cf82afeb10beefa6efa42da2bdcea46f".
2012-09-02
-
- Thanks. I'll have a look over it tonight.
-
- Nathan, big thanx for your commit:924e7eb9f21d342f6dcdd50219e96f9d6cf2f954. Personal startup scripts can be using now...
-
- Yes, its TDS_Version setting.
If I try to specify in Provider/DSN textbox custom settings, I shoud to specify full co...
2012-09-01
-
- When working with Mars, what is the layer CRS set to? A custom CRS
-
- What would the layer CRS be in the case ewhen working on the moon? A custom CRS?
-
08:29 PM Bug report #3743: [OsX] Georeferencer: can't set map coords from map canvas, and other odd behavior
- Chiming in with Olivier redlead's issue in 1.7.4 Snow Leopard, but 1) is this issue creep and 2) is this issue a dupl...
-
- what temporary database? A delimited text file that doesn't exist anymore? Then this might be a duplicate of #5832 ...
-
- After a fresh install, it works in Master, but 1.8.0 still crashes on reopening (possibly known defect of "defect lay...
-
- tagging as blocker as in 1.7.4 didn't crashed the program, so id indeed a regression.
-
- tagging as blocker as in 1.7.4 didn't crashed the program, so id indeed a regression.
-
- tagging as blocker as in 1.7.4 didn't crashed the program, so id indeed a regression.
-
- tagging as blocker as in 1.7.4 didn't crashed the program, so id indeed a regression.
-
- marisn - wrote:
> As long as QGIS was using just datasets .prj file contents, it was fine.
That's part of the proble... -
- >Pointing out that there are also issues on QGIS side is threated like blasphemy.
I'm sorry but you are plain wrong... -
> but error still exists...
it does happen on *any* osgeo4w installation or only on your machine?-
07:29 AM Feature request #5090: Offline editing plugin - Work only with AOI
- AOI is a subset of *any* query. It would be really useful to take offline only the records returned by a query. Worki...
2012-08-31
-
- > If there is something in old symbology that is missing in the new one, please add it here
Yes, I already did, but ... -
- Alister Hood wrote:
> There is also no way to specify pen style, which was possible in the old symbology.
>
> But is... -
-
09:08 AM Feature request #6285: Set Offsets for Point Labels
- It's certainly close. While the fix for #3492 would resolve the problem I'm having right now, I'd really prefer the o...
-
- Seems duplicate of #3492
Please reopen if necessary. -
- Seems duplicate of #3492
Please reopen if necessary. -
- If there is a longer term, better solution, let's leave it open so we'll not forget it.
-
- If there is a longer term, better solution, let's leave it open so we'll not forget it.
-
- If there is a longer term, better solution, let's leave it open so we'll not forget it.
-
- Qgis Server filters are quite basic in this moment. Comparison should be available case insensitive too, and a "LIKE"...
-
- this belongs in the "osgeo4w bugtracker":http://trac.osgeo.org/osgeo4w. Please try a fresh install. Might be relat...
-
- this belongs in the "osgeo4w bugtracker":http://trac.osgeo.org/osgeo4w. Please try a fresh install. Might be relat...
-
- After installing qgis-dev via Osgeo4w-Installer, the qgis-dev.bat does not start the program. The following dlls are ...
-
- I tried to connect to a MSAccess database table via evis. The database table has fields E and N with coordinates for ...
-
- marisn: could you upload a sample raster / project file or send me data or link privately if it is secret?
I remember... -
- today i have updated qgis master to 1.9.55 and new version of gdal (under "command_utilities" list) appeared.
it is 1... -
- Marco Hugentobler wrote:
> Commit ee1636900a3403127d1853f52ae79853082a0ca5 localises the string (with thousand separa... -
- Commit ee1636900a3403127d1853f52ae79853082a0ca5 localises the string (with thousand separator here). Is this what you...
-
- Hi,
I like to have possibility to render thousand separators in numeric scalebars in map composer. Now, when I have ... -
04:56 AM Bug report #6229: changing existing symbol or color ramp does not work in new style manager
- Found issue that new entry was added to db instead of changing old entry, fixed in 2ab844abf8302a489abe86a25a99b54f49...
-
- A related issue: It seems to make numerous attempts to connect to the proxy server with the same credentials, even wh...
-
- We have an internal WMS server ( http://geognosis-vip/wms/wms.exe ) that we can access with several different clients...
-
04:08 AM Bug report #6291 (Closed): python API provides removed blueBandName() for QgsRasterLayer (returni...
- QgsRasterLayer('/myraster.tif',"raster") has .blueBandName() but no redBandName, greenBandName or grayBandName anymor...
-
- Giovanni Manghi wrote:
>
> not sure, but aren't both gdal issues?
Well. No. They both are QGIS issues triggered by c... -
- Giovanni Manghi wrote:
> Andreas Neumann wrote:
> > With the recent builds QGIS does not crash any more.
>
> should ...
2012-08-30
-
- Andreas Neumann wrote:
> With the recent builds QGIS does not crash any more.
should we close this ticket? -
- With the recent builds QGIS does not crash any more.
But e.g. the Global Transparency Setting (slider) is just ignor... -
> Issue should be closed.
can the original reporter please test and eventually close the ticket? thanks in advance.
-
- Jaka Kranjc wrote:
> Still present in current HEAD and I agree, this isn't the expected behaviour. Instead of forcing... -
- stefano campus wrote:
> yes. from osgeo i have first downgraded gdal then upgraded to last version that now is 1.9.1-... -
- In the raster layer properties of a WMS the global transparency is not working.
One can set a value with the slider,... -
- Fix from commit:487879df52 introduces another problem. When backbuffer enabled and layers loaded into map then any do...
-
- Fix from commit:487879df52 introduces another problem. When backbuffer enabled and layers loaded into map then any do...
Also available in: Atom