Bug report #3650
shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Windows (but import is fine under qgis 1.5)
| Status: | Closed | ||
|---|---|---|---|
| Priority: | Low | ||
| Assignee: |  Redmine Admin | ||
| Category: | GRASS | ||
| Affected QGIS version: | Regression?: | No | |
| Operating System: | Windows | Easy fix?: | No |
| Pull Request or Patch supplied: | Resolution: | duplicate | |
| Crashes QGIS or corrupts data: | Copied to github as #: | 13709 |
Description
I found a few shapefiles (I'll attach one as exemple) that are not imported into a GRASS mapset under Windows using qgis 1.6/trunk. Using qgis 1.5 the process runs smoothly.
The output window message under QGIS 1.5 says
v.in.ogr -o dsn=C:/Users/gio/Desktop/GRASS/regioes/regioes.shp output=reg Datum not recognised by GRASS and no parameters found Over-riding projection check Layer: regioes Importing map 109 features... ----------------------------------------------------- Building topology for vector map ... Registering primitives... 111 primitives registered 19480 vertices registered Building areas... 109 areas built 109 isles built Attaching islands... Attaching centroids... Number of nodes: 110 Number of primitives: 111 Number of points: 0 Number of lines: 0 Number of boundaries: 111 Number of centroids: 0 Number of areas: 109 Number of isles: 109 Number of incorrect boundaries: 2 Number of areas without centroid: 109 ----------------------------------------------------- Cleaning polygons, result is not guaranteed! Building topology for vector map ... Number of nodes: 110 Number of primitives: 111 Number of points: 0 Number of lines: 0 Number of boundaries: 111 Number of centroids: 0 Number of areas: - Number of isles: - ----------------------------------------------------- Break polygons: ----------------------------------------------------- Remove duplicates: ----------------------------------------------------- Break boundaries: ----------------------------------------------------- Remove duplicates: ----------------------------------------------------- Clean boundaries at nodes: ----------------------------------------------------- Change dangles to lines: ----------------------------------------------------- Remove bridges: ----------------------------------------------------- Building topology for vector map ... Building areas... 110 areas built 91 isles built Attaching islands... Number of nodes: 134 Number of primitives: 211 Number of points: 0 Number of lines: 0 Number of boundaries: 211 Number of centroids: 0 Number of areas: 110 Number of isles: 91 Number of areas without centroid: 110 Layer: regioes ----------------------------------------------------- ----------------------------------------------------- Building topology for vector map ... Registering primitives... 262 primitives registered 14879 vertices registered Building areas... 110 areas built 91 isles built Attaching islands... Attaching centroids... Number of nodes: 243 Number of primitives: 262 Number of points: 0 Number of lines: 0 Number of boundaries: 153 Number of centroids: 109 Number of areas: 110 Number of isles: 91 Number of areas without centroid: 1 ----------------------------------------------------- 109 input polygons Total area: 3.023812e+011 (110 areas) Overlapping area: 0.000000e+000 (0 areas) Area without category: 6.103451e+005 (1 areas) Successfully finished
The output window message under QGIS 1.6 (standalone) says
v.in.ogr -o dsn=C:/Users/gio/Desktop/GRASS/regioes/regioes.shp output=reg2 Datum not recognised by GRASS and no parameters found Over-riding projection check Layer: regioes Importing map 109 features... ----------------------------------------------------- Building topology for vector map ... Registering primitives... 111 primitives registered 19480 vertices registered Building areas... 109 areas built 109 isles built Attaching islands... Attaching centroids... Number of nodes: 110 Number of primitives: 111 Number of points: 0 Number of lines: 0 Number of boundaries: 111 Number of centroids: 0 Number of areas: 109 Number of isles: 109 Number of incorrect boundaries: 2 Number of areas without centroid: 109 ----------------------------------------------------- Cleaning polygons, result is not guaranteed! Size of 'coor' file differs from value saved in topology file Please rebuild topology for vector map Unable to open topology file for vector map Finished with error
The output window message under QGIS trunk (osgeo4w) says
v.in.ogr -o dsn=C:/Users/gio/Desktop/GRASS/regioes/regioes.shp output=reg snap=-1 min_area=0.0001 Datum not recognised by GRASS and no parameters found Over-riding projection check Layer: regioes Default driver / database set to: driver: dbf database: $GISDBASE/$LOCATION_NAME/$MAPSET/dbf/ Importing map 109 features... ----------------------------------------------------- Building topology for vector map ... Registering primitives... 111 primitives registered 19480 vertices registered Building areas... 109 areas built 109 isles built Attaching islands... Attaching centroids... Number of nodes: 110 Number of primitives: 111 Number of points: 0 Number of lines: 0 Number of boundaries: 111 Number of centroids: 0 Number of areas: 109 Number of isles: 109 Number of incorrect boundaries: 2 Number of areas without centroid: 109 ----------------------------------------------------- Cleaning polygons, result is not guaranteed! Size of 'coor' file differs from value saved in topology file Please rebuild topology for vector map Unable to open topology file for vector map Finished with error
History
#1
Updated by Giovanni Manghi over 13 years ago
PS
it works fine under linux/trunk
#2
Updated by Markus Neteler over 13 years ago
Is the GRASS version you are using sufficiently new?
#3
Updated by Giovanni Manghi over 13 years ago
Replying to [comment:2 neteler]:
Is the GRASS version you are using sufficiently new?
I can't do much for that, we are speaking of Windows: qgis was installed with the standard osgeo4w/standalone installers (that include GRASS).
#4
Updated by hellik - over 13 years ago
Replying to [comment:3 lutra]:
Replying to [comment:2 neteler]:
Is the GRASS version you are using sufficiently new?
I can't do much for that, we are speaking of Windows: qgis was installed with the standard osgeo4w/standalone installers (that include GRASS).
just tested this shapefile with a standalone WinGRASS-6.4.SVN--1-Setup.exe
the import seems to be ok:
v.in.ogr --verbose dsn=C:\\dl\ egioes_shp\ egioes.shp output=regioesshp Datum <unknown> nicht erkannt von GRASS und keine Parameter gefunden. Die Projektionsinformationen des Eingabedatensatzes und der aktuellen Location scheinen übereinzustimmen. Verwende die temporäre Vektorkarte <regioesshp_tmp> Layer: regioes Zähle Polygone für 109 Objekte... Distanz der Grenz-Aufteilung in Karteneinheiten: 60196 Importiere 109 Objekte der Karte... ----------------------------------------------------- Erstelle Topologie für die Vektorkarte <regioesshp_tmp>... Registriere Primitive... 375 Primitive registriert 19744 Vertices registriert Die Topologie wurde erstellt Anzahl der Knoten: 374 Anzahl der Primitive: 375 Anzahl der Punkte: 0 Anzahl der Linien: 0 Anzahl der Grenzen: 375 Anzahl der Zentroide: 0 Anzahl der Flächen: - Anzahl der Inseln: - ----------------------------------------------------- Säubere Polygone; für das Resultat wird nicht garantiert! ----------------------------------------------------- Zerlege Polygone: ----------------------------------------------------- Lösche Doppelte: ----------------------------------------------------- Zerlege Grenzen: Überschneidungen: 0 ----------------------------------------------------- Lösche Doppelte: ----------------------------------------------------- Säubere Grenzen an den Knoten: ----------------------------------------------------- Ändere Überstände zu Linien: ----------------------------------------------------- Lösche Brücken: ----------------------------------------------------- Verbinde Grenzen: 320 Flächengrenzen zusammengefasst 51 neue Flächengrenzen ----------------------------------------------------- Erstelle Topologie für die Vektorkarte <regioesshp_tmp>... Erzeuge Flächen... 110 Flächen angelegt 91 Inseln angelegt Füge Inseln hinzu... Die Topologie wurde erstellt Anzahl der Knoten: 400 Anzahl der Primitive: 809 Anzahl der Punkte: 0 Anzahl der Linien: 0 Anzahl der Grenzen: 809 Anzahl der Zentroide: 0 Anzahl der Flächen: 110 Anzahl der Inseln: 91 Anzahl der Flächen ohne Zentroid: 110 ----------------------------------------------------- Finde Zentroide der Layer: regioes ----------------------------------------------------- Schreibe Zentroide: ----------------------------------------------------- 109 Eingabepolygone Gesamtfläche: 3.02381E+011 (110 Flächen) Überlappende Fläche: 0 (0 Flächen) Fläche ohne Kategorie: 610345 (1 Flächen) ----------------------------------------------------- Erstelle Topologie für die Vektorkarte <regioesshp>... Registriere Primitive... 256 Primitive registriert 14873 Vertices registriert Erzeuge Flächen... 110 Flächen angelegt 91 Inseln angelegt Füge Inseln hinzu... Füge Zentroide hinzu... Die Topologie wurde erstellt Anzahl der Knoten: 237 Anzahl der Primitive: 256 Anzahl der Punkte: 0 Anzahl der Linien: 0 Anzahl der Grenzen: 147 Anzahl der Zentroide: 109 Anzahl der Flächen: 110 Anzahl der Inseln: 91 Anzahl der Flächen ohne Zentroid: 1 (Sun Mar 27 17:59:38 2011) Command finished (1 sec)
I'll try also with osge4w-qgis.
#5
Updated by hellik - over 13 years ago
Replying to [comment:4 hellik]:
I'll try also with osge4w-qgis.
I've tested this also now with osge4w-qgis-trunk (1.7.0-100):
v.in.ogr -o dsn=C:/dl/regioes_shp/regioes.shp output=regioes2 snap=-1 min_area=0.0001 ?Datum nicht erkannt von GRASS und keine Parameter gefunden. ?bersteuere die ?berpr?fung der Projektion. Layer: regioes Importiere 109 Objekte der Karte... ----------------------------------------------------- Erstelle Topologie f?r die Vektorkarte ... Registriere Primitive... 111 Primitive registriert 19480 Vertices registriert Erzeuge Fl?chen... 109 Fl?chen angelegt 109 Inseln angelegt F?ge Inseln hinzu... F?ge Zentroide hinzu... Anzahl der Knoten: 110 Anzahl der Primitive: 111 Anzahl der Punkte: 0 Anzahl der Linien: 0 Anzahl der Grenzen: 111 Anzahl der Zentroide: 0 Anzahl der Fl?chen: 109 Anzahl der Inseln: 109 Anzahl inkorrekter Grenzen: 2 Anzahl der Fl?chen ohne Zentroid: 109 ----------------------------------------------------- ?S?ubere Polygone; f?r das Resultat wird nicht garantiert! Erstelle Topologie f?r die Vektorkarte ... Anzahl der Knoten: 110 Anzahl der Primitive: 111 Anzahl der Punkte: 0 Anzahl der Linien: 0 Anzahl der Grenzen: 111 Anzahl der Zentroide: 0 Anzahl der Fl?chen: - Anzahl der Inseln: - ----------------------------------------------------- Zerlege Polygone: ----------------------------------------------------- L?sche Doppelte: ----------------------------------------------------- Zerlege Grenzen: ----------------------------------------------------- L?sche Doppelte: ----------------------------------------------------- S?ubere Grenzen an den Knoten: ----------------------------------------------------- ?ndere ?berst?nde zu Linien: ----------------------------------------------------- L?sche Br?cken: ----------------------------------------------------- Erstelle Topologie f?r die Vektorkarte ... Erzeuge Fl?chen... 110 Fl?chen angelegt 91 Inseln angelegt F?ge Inseln hinzu... Anzahl der Knoten: 134 Anzahl der Primitive: 211 Anzahl der Punkte: 0 Anzahl der Linien: 0 Anzahl der Grenzen: 211 Anzahl der Zentroide: 0 Anzahl der Fl?chen: 110 Anzahl der Inseln: 91 Anzahl der Fl?chen ohne Zentroid: 110 Layer: regioes ----------------------------------------------------- ----------------------------------------------------- Erstelle Topologie f?r die Vektorkarte ... Registriere Primitive... 262 Primitive registriert 14879 Vertices registriert Erzeuge Fl?chen... 110 Fl?chen angelegt 91 Inseln angelegt F?ge Inseln hinzu... F?ge Zentroide hinzu... Anzahl der Knoten: 243 Anzahl der Primitive: 262 Anzahl der Punkte: 0 Anzahl der Linien: 0 Anzahl der Grenzen: 153 Anzahl der Zentroide: 109 Anzahl der Fl?chen: 110 Anzahl der Inseln: 91 Anzahl der Fl?chen ohne Zentroid: 1 ----------------------------------------------------- 109 Eingabepolygone Gesamtfl?che: 3.023812e+011 (110 Fl?chen) ?berlappende Fl?che: 0.000000e+000 (0 Fl?chen) Fl?che ohne Kategorien: 6.103451e+005 (1 Fl?chen) Erfolgreich beendet
also here the import by v.in.ogr works.
#6
Updated by Giovanni Manghi over 13 years ago
also here the import by v.in.ogr works.
it still fail for me with osgeo4w/qgis trunk
v.in.ogr -o dsn=C:/Users/gio/Downloads/regioes_shp/regioes.shp output=regioes_test1 snap=-1 min_area=0.0001 Datum not recognised by GRASS and no parameters found Over-riding projection check Layer: regioes Importing map 109 features... ----------------------------------------------------- Building topology for vector map ... Registering primitives... 111 primitives registered 19480 vertices registered Building areas... 109 areas built 109 isles built Attaching islands... Attaching centroids... Number of nodes: 110 Number of primitives: 111 Number of points: 0 Number of lines: 0 Number of boundaries: 111 Number of centroids: 0 Number of areas: 109 Number of isles: 109 Number of incorrect boundaries: 2 Number of areas without centroid: 109 ----------------------------------------------------- Cleaning polygons, result is not guaranteed! Size of 'coor' file differs from value saved in topology file Please rebuild topology for vector map Unable to open topology file for vector map Finished with error
#7
Updated by Giovanni Manghi over 13 years ago
I played around a bit more: the attached vector is always imported with no problems if I use the qgis/GRASS shell or if I launch the v.in.ogr GRASS GUI from the qgis/GRASS shell.
If I use the v.in.ogr qgis GUI I still hit the above problems (even not using snap=-1 and min_area=0.0001). Funny thing is that if I keep trying (actually I have to change the output map name, because of #3646 vectors cannot be deleted, then not even overwritten) at the 2nd/3rd try it doesn't stop at
----------------------------------------------------- Cleaning polygons, result is not guaranteed! Size of 'coor' file differs from value saved in topology file Please rebuild topology for vector map Unable to open topology file for vector map Finished with erro
but this result usually in a freeze/crash - as per #3648 - before showing the "successfully finished" message (but the process has finished, see https://trac.osgeo.org/qgis/ticket/3648#comment:6 ).
I attach another vector that show the same "symptoms".
I'll appreciate if someone other than me and hellik can give it a try.
I'm using QGIS trunk/osgeo4w under Seven 32/64 bit.
#8
Updated by hellik - over 13 years ago
Replying to [comment:7 lutra]:
I attach another vector that show the same "symptoms".
tested the urbano-shapefile in a WinVista32 box with WinGRASS-6.4.SVN--1-Setup.exe and osgeo4w-qgis-trunk 1.7.0-106
I've tried in about 30 different qgis-sessions with different command within qgis (v.in.ogr, v.in.ogr.qgis, grass-shell, etc.), the urbano-shapefile is every time imported without any problem.
Helmut
#9
Updated by Paolo Cavallini over 13 years ago
- Resolution set to duplicate
- Status changed from Open to Closed