Activity
From 2016-09-24 to 2016-10-23
2016-10-23
-
07:02 PM Bug report #14698 (Closed): No labels shown when font Size is set to Map unit for labels
- Fixed in changeset commit:"e3517c6f4ca74360b8c99b6c5efc810b7327e0f0".
-
10:42 AM Feature request #6894: GRASS r.mapcalc cumbersome to use, issues on Windows
- Currently the command is quite cumbersome:
* rasters have to be selected in the interface anyway (quite pointless fr...
2016-10-22
-
- AFAICT iterating is broken now in 2.16, so I raise the severity.
-
- Unsure whether it is the same error. Also running `SAGA:Clip raster with polygon` runs fine without iterative, but fa...
-
- Thanks. IMHO it is useful to backport it both to 2.14 and to 2.16 series.
-
09:49 AM Bug report #15743: Processing: errors in underlying commands are not handled gracefully by iterat...
- this is fixed in master
#b4562d143e6ef140e14b0cb9625ef923412db793
Looks like it is not backported... -
- When a command has an error, and is ran as iterative, the underlying error is not handled gracefully, and returns:
<... -
12:54 PM Bug report #15744 (Closed): Processing do not load on QGIS 2.14.8/OSGeo4W
- Fixed in changeset commit:"6bf74b437646c480595ead6765102a3f70825b4f".
-
11:42 AM Bug report #15744 (Closed): Processing do not load on QGIS 2.14.8/OSGeo4W
- ...
-
- Pick any QGIS tool for vector layers and run it in iterate mode, leaving the output field empty.
Run the tool: the p... -
- running the alg from Processing I get:...
-
03:04 AM Bug report #15739: Wrong "Zoom to layer" extent on a shapefile layer with logically deleted records
- 2.14.8 (LTR) also affected [ missing in the Affected version set ]
-
- 2.14.8 (LTR) also affected [ missing in the Affected version set ]
2016-10-21
-
12:21 AM Bug report #15741 (Closed): PostGIS issue when using 'Merge selected features' tool (Geometry t...
- The 'Merge selected features' tool is also available for non touching features. This may cause data loss when using P...
-
10:59 PM Feature request #15740 (Open): Inform user of logically deleted records in shapefiles and allow r...
- If a shapefile contains logically deleted records, the user is not informed about that.
The only thing a user can do... -
- When clicking on the "Zoom to layer" function on a shapefile with logically-deleted records in the DBF, the zoom wron...
-
09:50 PM Feature request #13113: Support for multiple geometry in QGIS
- Nathan Woodrow wrote:
> Support for mixed geometry types in one layer isn't going to happen in QGIS for a long time i... -
10:27 AM Feature request #10947: Use Filter() instead of STIntersects() for better performance in MSSQL
- I think 4) is more complex to implement than 3).
Because 3) would also improve performance a lot, I want to propose t... -
09:19 AM Bug report #15738 (Closed): Repeated segfault when merging and editing polygons
- Steps to reproduce:
Open the attached shape file that contains a set of polygons.
Select two polygons.
Merge the poly... -
04:04 AM Bug report #15737: Editing a form opened via openFeatureForm crashes qgis
- It seems that only osgeo4w is not affected
-
- Hi,
on 2.16.3 (either compiled or from binaries) and master 7d00cae4bbb723aaf4a2c1e51a9a485c402bc180 (23th of septe... -
02:09 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers
- Got the same problem as well under Linux, as under Windows 7 and 10. QGIS VErsion 16.3 and 16.1.
I got a project with... -
- Got the same problem as well under Linux, as under Windows 7 and 10. QGIS VErsion 16.3 and 16.1.
I got a project with...
2016-10-20
-
- In complex projects, if labels are very cluttered, it is often useful to switch them all off. Currently this requires...
-
- Loading a shapefile with logically-deleted records in the DBF includes the logically-deleted records in the count sho...
-
- yes, make sense to me
Thanks a lot! -
- Ok, sorry for the light push (I was hoping the testsuite would have caught regressions)
For the record, master_2 rev... -
- Ok, sorry for the light push (I was hoping the testsuite would have caught regressions)
For the record, master_2 rev... -
- Ok, sorry for the light push (I was hoping the testsuite would have caught regressions)
For the record, master_2 rev... -
- Ok, sorry for the light push (I was hoping the testsuite would have caught regressions)
For the record, master_2 rev... -
- Sandro
I had to revert your change. It breaks many places where extents are used, and also it modifies the syntax of... -
- Fixed in changeset commit:"81e86accc395b8fb93a73e666d9ac772bcdced7c".
-
08:13 PM Bug report #15734: processing: graphical modeler broken under master
- PR submitted (https://github.com/qgis/QGIS/pull/3651).
-
- When trying to add any parameter to a new model, processing throws the following error:...
-
08:26 PM Bug report #15637: ArcGIS MapServer Services Export not working
- Turns out the support for import/export of connections for arc rest services was never there, so for the meanwhile I ...
-
- Fixed in changeset commit:"1c2f0de9fbea8e90c9d20036bfa1601c1d192a89".
-
- I think a possible use case where to use this function is when editing very complex features that cause slow renderin...
-
05:38 PM Bug report #15686: Save as Image from WMS/WMTS has reprojection issues
- Reprojection was performed by selecting the target SRS in the "Save As" dialog. The resolution in both case was set t...
-
03:06 PM Bug report #15727 (Closed): Eliminate sliver polygons fails when dealing with fields of type Long.
- Solved by this commit: #6df926dfe6e3e8f7ac330fbb9206dc69492da6ed
-
12:30 PM Bug report #11986: Intersection returns the wrong result
- Anonymous wrote:
> Fixed in changeset commit:"dbbbf610cfcf3fa655118d73d27a197ac1b3b224".
I can see that sanity check... - 07:45 AM Bug report #11986 (Closed): Intersection returns the wrong result
- Fixed in changeset commit:"dbbbf610cfcf3fa655118d73d27a197ac1b3b224".
-
12:15 PM Bug report #15708: qgis master error during cmake configure
- Those are just warnings, not errors. Does the further compilation process finish successfully?
-
- QML API currently saves the whole layer definition which leads to caveats in project handling.
One is that saving m... -
- Fixed in changeset commit:"b385ebd9ba9272516eed61e5825a603fcee969e9".
-
- All good now. Thanks again Victor.
-
- All good now. Thanks again Victor.
-
- All good now. Thanks again Victor.
-
03:59 AM Bug report #15713 (Feedback): processing: grass7 algorithms broken, (falsely) claims grass7 not i...
-
04:27 AM Bug report #15668: Raster Translate doesn't read output format
- I have a similar problem with QGIS LTR 2.14.7, QGIS 2.16.3 and QGIS 2.17 under windows 64 bits (install OSGeo4W 64 bi...
-
- I have a similar problem with QGIS LTR 2.14.7, QGIS 2.16.3 and QGIS 2.17 under windows 64 bits (install OSGeo4W 64 bi...
-
- I have a similar problem with QGIS LTR 2.14.7, QGIS 2.16.3 and QGIS 2.17 under windows 64 bits (install OSGeo4W 64 bi...
-
- If you use the 2.5D renderer, the "Control feature rendering order" is ticked and pre-filled with the fancy 2.5D form...
-
- Use the 2.5D renderer on a polygon layer.
Turn on or off any Draw Effects.
Nothing happens. -
- The problem of TIN Interpolation always exists in QGIS LTR 2.14.7, QGIS 2.16.3 and QGIS 2.17...
Any solution Maximil... -
- Duplicates #15707
-
- Duplicates #15707
-
- Duplicates #15707
-
03:15 AM Bug report #15721: WFS 2.0 does not use srsDimension
- I use this tag for severe not for regression.
I follow the documentation : Severe/Regression: a bug that makes QGIS t... -
- Why tagging this as regression? did it worked as expected in previous qgis releases? cheers!
-
- Why tagging this as regression? did it worked as expected in previous qgis releases? cheers!
-
- One containers the "geometry checker" and the other the classical "ftools" tools.
-
- Apperently in the latest Processing/master_2 the GRASS region has become a mandatory parameter for vector tools. This...
2016-10-19
-
- Fixed in changeset commit:"06976a2e87737c755f5783243e09185e7c872e06".
-
- Sandro Santilli wrote:
> Because this ticket reports too many bugs and is more useful to restrict the scope of ticket... -
- Because this ticket reports too many bugs and is more useful to restrict the scope of tickets.
You can see from the t... -
- Sandro Santilli wrote:
> Please file a new ticket if you see problems with GDAL-1.x.
why should I file a new ticket ... -
- Please file a new ticket if you see problems with GDAL-1.x.
-
- Please file a new ticket if you see problems with GDAL-1.x.
-
- The problems with gdal < 2.* has to be fixed and/or retested after this latest patches.
-
- The problems with gdal < 2.* has to be fixed and/or retested after this latest patches.
-
- Fixed in changeset commit:"dc2df62b88cdc01b0fc8839779da44fb87ccd213".
-
- I tested your patches on master_2 (gdal 2.*).
If the "raster extent..." is left blank is all ok, no automatically ad... -
- Giovanni can you test this change ?
https://github.com/qgis/QGIS/pull/3638 -
- Giovanni can you test this change ?
https://github.com/qgis/QGIS/pull/3638 -
- The param is already non-mandatory, but the *GUI* currently intercept a blank value to signify "use min extent" rathe...
-
- Sandro Santilli wrote:
> I found the culprit of non-optionality being gui/ExtentSelectionPanel, which takes an empty ... -
- I found the culprit of non-optionality being gui/ExtentSelectionPanel, which takes an empty string as meaning "use mi...
-
- I'm trying to figure what sets that raster extent, beause at the time getConsoleCommands is reached (in algs/gdal/war...
-
- Fixed in changeset commit:"3bdc77d3daa4257c926932204ff4a9340084788a".
-
- PR submitted (https://github.com/qgis/QGIS/pull/3645).
-
- PR submitted (https://github.com/qgis/QGIS/pull/3645).
-
- When the line pattern fill symbology uses map unit line spacing value and the scale forces the line spacing to effect...
-
- It looks like your "gui" variable with canvas and a map tool still lives when QGIS libs have been already uninitializ...
-
- It looks like your "gui" variable with canvas and a map tool still lives when QGIS libs have been already uninitializ...
-
- With Shapefiles such as [1] that have fields of type Long, the _Eliminate sliver polygons_ QGIS algorithm throws an e...
-
06:51 PM Feature request #15726 (Open): print composer - ability to run python before / during / after exp...
- Adding the ability to run custom python functions in the print-composer export process would allow for additional aut...
-
04:42 PM Feature request #15725 (Open): Replace a data source in QGIS given a symbology with many layers
- Given a complex QGIS style file (project file .qgs with related symbols) which consists of many layers (>20), which r...
-
04:30 PM Bug report #15369: layer rendering very slow and QGIS crashes with large number of rule based sym...
- Updates made by other people to this ticket appear to suggest that the reported issue was *slow rendering*. In fact t...
-
06:35 AM Bug report #15369: layer rendering very slow and QGIS crashes with large number of rule based sym...
- I can confirm that changing from categorized to rule based renderer with a large number of rules makes rendering magn...
-
01:17 PM Bug report #15724: Crash - seg fault on project open
- A copy of the project file can be found here:
https://www.dropbox.com/s/2pxtodg66c8qelx/project_crash.qgs?dl=1
Unfor... -
- Can you share the project?
-
- Just noticed that my dump file was too big for an attachment. It can be downloaded from here:
https://www.dropbox.com... -
- A coworker has been developing a map that has started crashing when he tries to open it. The crash occurs both on Win...
-
12:32 PM Bug report #15273: Geopackage layer extent wrong
- Fix requires GDAL 2.1.2 or later to work
-
- Fix requires GDAL 2.1.2 or later to work
-
- Fix requires GDAL 2.1.2 or later to work
-
- @volaya @alexbruy
tested the latest master_2
"missing parameter value: Table to import..."
when leaving the table n... -
- @volaya @alexbruy
tested the latest master_2
"missing parameter value: Table to import..."
when leaving the table n... -
05:22 AM Bug report #3673 (Closed): Offline edit: do not allow select not PostGIS/WFS-T layers
-
- Fixed in 1f1898df1616ce5d3239bf2257470dd2c6b96566
-
- @Ervin, make sure you use the layer.add/remove/etcFeature() methods and not layer.dataProvider().add/remove/etcFeatur...
-
- I assume that commit:1f1898df1616ce5d3239bf2257470dd2c6b96566 fixes this issue.
Basically, in 2.12, the scale "0" ... -
04:33 AM Feature request #15617: QGIS/Qt does not trigger auto-import of Windows root Certificate Authorities
- fix only for 2.14 and release-2_18 because probably the issue is not present in qgis3 due the different ssl infrastru...
-
- created two PR
for 2.14: https://github.com/qgis/QGIS/pull/3640
for 2.18: https://github.com/qgis/QGIS/pull/3671 -
04:31 AM Bug report #15722: Geopackage attribute table issues
- Here is an example GoePackage with example table and view.
Thanks a lot for any hint! -
- On QGIS 2.14.7 (ed8807c) Windows OSGeo4W 64-bit attribute table doesn't contain primary key column (QGIS 2.16+ is doi...
-
04:28 AM Bug report #15723 (Closed): Labels not showing when adding them using Python
- I have a simple vector polygon layer with one feature. Using python I create a simple label displaying the area of th...
-
- Arnaud: note that as long as we store the value in a double, 18 digits just won't fit, so the value would be changed ...
2016-10-18
-
01:53 AM Bug report #15188: Importing .shp files into PostGIS fails (Error 7)
- Hello Sandro,
It's me that change this some times ago, because the french ministry of developement says that importi... -
- Sandro Santilli wrote:
> And the issue is that "-te" is computed wrong ? Or "-te" should not be passed in at all ?
i... -
- And the issue is that "-te" is computed wrong ? Or "-te" should not be passed in at all ?
-
- Hi Sandro,
I'm sorry to me the description is clear and detailed
Sandro Santilli wrote:
> I'm trying to reproduce, ... -
- Giovanni: maybe it would be more useful to split this report in 3 different tickets ?
It's not easy to understand wha... -
- I'm trying to reproduce, can you confirm I should be useing the "Warp (reproject)" processing tool ?
Opening the dial... -
- I'm trying to reproduce, can you confirm I should be useing the "Warp (reproject)" processing tool ?
Opening the dial... -
- Fixed in changeset commit:"acf74a6539a015dc5ae3e948c43163e01dde2d3d".
-
- I could reproduce in final-2_16_3-97-gb779a6a and 2.17+ (commit:f289ef3).
Could *not* reproduce in 2.14 branch, altho... -
- How about rounding to closest integer ?
-
- How about rounding to closest integer ?
-
- The WFS service of French National Institute of Geographic and Forest Information (IGN-F) provide some geometry with ...
-
07:11 AM Bug report #14350: Virtual layers problem with accents
- see test dataset
with SQL : SELECT * FROM essai WHERE "STATUT" = 'Sous-préfecture' -
- Fixed in changeset commit:"e55d1923fc08900864f7ef02866cca0a2e11cc15".
-
- Edouard if I read your original submission correctly we dont' need a project saved by 2.16 but by 2.12 ?
-
- Fixed in changeset commit:"70ae301310c7a58134ac699fae70af7fd1176684".
-
-
- Paolo could you test with a current version, either from release-2_14 or master_2 ?
If you can still reproduce, can y... -
- Paolo could you test with a current version, either from release-2_14 or master_2 ?
If you can still reproduce, can y... -
- Alex, Giovanni: could you please try with current master_2 or release-2_14 branches ?
I've recently fixed extracting ... -
- Alex, Giovanni: could you please try with current master_2 or release-2_14 branches ?
I've recently fixed extracting ... -
- Alex, Giovanni: could you please try with current master_2 or release-2_14 branches ?
I've recently fixed extracting ... -
- Fixed in changeset commit:"17510f095202776c5a050e8b3dd2d1b63133e9ef".
-
- Attempts to use the "Import Vector into PostGIS database" tool of Processing results in this error:
Traceback (most ...
2016-10-17
-
- Fixed in changeset commit:"e8be0ed988f091bac1c8c6653777869f9f3f222c".
-
- Fixed in changeset commit:"89cc6454b989de1746779b2f648a32d2863ebada".
-
- Fixed in changeset commit:"ecee43814a3ee13470683e376191cb3719ec0e44".
-
05:53 AM Bug report #15717 (Closed): Change project CSR from layer CSR doesn't change CSR everywhere
- I've noticed that when using context menu "Set project CRS from layer" the CRS code showed in the right bottom corner...
-
- All fixed
-
- All fixed
-
- Thanks - Frits!
Is it fixed with commit:12a8891
@Mathieu - did you test? Can we close this issue? -
01:56 PM Bug report #15718 (Closed): Blocking labels not respected for centroid-based label placement
- It seems to me that the 'blocking' feature for labels is buggy (or not fully documented).
I noticed that the result d... -
- the latest build of master on osgeo4w is 979d619 that does not contain the latest commits, among the others the lates...
-
- a screencast to show hos the interface works
https://youtu.be/pN30XE7r7_k -
- just waiting to have a UX review before to create the PR
-
- I'll prepare a PR from the following branch:
https://github.com/boundlessgeo/qgis/tree/CAs_import_via_keystore
the ... -
- I didn't find any solution to #15687 => the only way to reload ssl CA cache without waiting some minutes for the upda...
-
- commit:25d0351 should fix it
Please confirm and close the ticket
Thanks for the report! -
- For ~1 week now, I can't execute any grass7 algorithm within processing. When I try to do so, I can an error message ...
-
- I started just now to use a temporary scratch layer for digitizing features: in detail I need to split an existing la...
- 05:12 AM Bug report #14452 (Closed): Height and Angle are not restored from .qml file for 2.5D renderer
- Fixed in changeset commit:"f0dd7fd4e7fe830de7331a27bcf3939712e3a84c".
-
04:13 AM Bug report #15463: Layer "Scale dependent visibility" doesn't work anymore since 2.16
- Matthias Kuhn wrote:
> Can you attach a .qgs project file with an affected layer?
Sorry I can't. Since The post of t... -
- Can you attach a .qgs project file with an affected layer?
- 04:05 AM Bug report #15414 (Closed): misbehavior maximum and minimum scale (layer properties)
- Fixed in changeset commit:"1f1898df1616ce5d3239bf2257470dd2c6b96566".
-
03:53 AM Bug report #15715 (Closed): Segmentation fault on exit when using a QgsMapTool
- When using pyqgis in a custom application, there is a Segmentation fault crash upon exiting the application after app...
-
03:48 AM Bug report #12610: QGIS not showing WMS legend while LegendURL is present
- As I can see, in QGis 2.14.7 it is resolved using the WMS Kay Warrie gave. I use a lot of WMS'es from the Flemish Gov...
-
03:28 AM Bug report #15714 (Closed): Qgis donload entire postgis data table (with geom) opening attribute ...
- Dear developers
as I wrote on this thread
http://osgeo-org.1560.x6.nabble.com/Qgis-and-huge-amount-of-data-opening-q... -
03:21 AM Bug report #15522: Qgis Server doesnt' respect the styling from Desktop
- cHello again,
Yes, only the GetProjectSettings is buggy (when layers are missing), everything else seems to be ok.
T... -
02:04 AM Bug report #15522: Qgis Server doesnt' respect the styling from Desktop
- Hi Tudor,
Thanks for founding issues, is the GetProjectSettings Request the only one to segfault QGIS Server ?
I apo...
2016-10-16
-
- @Rene
There is also a performance penalty regression. My production server seemed to be behaving less responsive and... - 01:46 AM Bug report #15683 (Closed): python/sip: qgsvectorlayer instance improperly turns into qgsmaplayer...
- Fixed in changeset commit:"03f08a6c79fc4016d7ed0b89262d916cb3b70bab".
-
- Matthias, it *did* fix this issue, I've got a working processing tool (db manager, etc.) again! :)
-
- Can you check the PR 3611?
https://github.com/qgis/QGIS/pull/3611
I don't really have an explanation why that shoul... -
- Fixed in changeset commit:"e58177cf9e360021618d6029821cbc8416496cff".
-
- Fixed in changeset commit:"be3e807d0f0e7a9099f7ff48ca02855583c1d841".
-
03:32 PM Bug report #12435: "Export Atlas as images" command in OSX won't let user choose file type.
- The issue prevents creating atlas images with transparent background, since file format cannot be changed to PNG.
-
01:38 PM Bug report #15712: Dissolve function crash QGIS 2.16.3
- Did see the issue #15707. I also tried the "Dissolve all" and it seems to take ages to finish similar to the one I st...
-
- I have a polygon layer with about 12000 polygons, I want to dissolve by using an ID field using "vector-geoprocessing...
-
08:47 AM Bug report #15692: DB-Manager freezes when running complex SQL queries
- What do you mean with "freeze"? Does the query finish in DB Manager after the necessary processing time? Unfortunatel...
-
08:37 AM Feature request #15711: Add surface and linear in legend
- Would it be possible to add a legend in addition to the count of entities
At your choice:
1 - The linear
2 - Surface... -
- Would it be possible to add a legend in addition to the count of entities
At your choice:
1 - The linear
2 - Surface... -
06:19 AM Bug report #15521: Concave hull broken
- Algorithm isn't working because Delaunay triangulation can't handle MultiPoint geometries. I've created "pull request...
2016-10-15
-
02:16 PM Bug report #15637: ArcGIS MapServer Services Export not working
- Confirmed on 2.17 Master on Ubuntu 16.04
-
- Hi Victor, thanks for the fixes. I see still two issues:
1) when the table name is left blank, once imported the tab... -
- You can replicate the problem by deleting the vl_material.. table from the offline.sqlite and restarting the apache s...
-
- @Rene
I just figured out why the server is crashing when doing a GetProjectSettings request.
The server cannot acce...
2016-10-14
-
- I made another PR which completely avoids adding any default: https://github.com/qgis/QGIS/pull/3607
-
-
- 2.14.7 is also affected (NOTE: "2.14.7" is missing from "Affected version" list)
-
- Sandro
i made this PR with changes and assigned it to you
https://github.com/qgis/QGIS/pull/3604
Feel free to merg... -
- I don't think "Create single-part geometries instead of multi-part" was ever meant to apply any conversion.
The "Impo... -
- 'Multipart to singleparts' converts a multipart feature with 'n' geometries to 'n' singlepart features.
-
- How does "Multipart to singleparts" work, within processing ? (downgrading from Severe/Regression to Normal)
-
- Also fixed for 2.14.8
-
- Fixed for 2.16.4, 2.18.0, master
-
- Fixed for 2.16.4, 2.18.0, master
-
- Fixed for 2.16.4, 2.18.0, master
-
- Fixed in changeset commit:"1b1b238836162e5088fb58670da169a6f352d9a8".
-
- I've just tried and with the patch "Buffer vectors" works fine.
"Clip vectors by extent" and "Convert format" seem to... -
06:52 AM Bug report #15698: [Processing] Import Vector into PostGIS database doesn't work with file geodat...
- Apparently most of the OGR tools in Processing are also having the same problem (I've just tried with buffer, clip, c...
-
- btw, it looks like "convert format" tool is still suffering the same bug - are you aware of a separate ticket for that ?
-
- Of course you can.
-
- Jérôme can we include the geodatabase files you provided in our testsuite ?
-
- Great! Thanks a lot!
-
- Pull request ready for tests: https://github.com/qgis/QGIS/pull/3605
-
- Taking it back, it doesn't look like #15168 has to do with this. Must have been a change in the geodatabase loader, t...
-
- NOTE: the "layername=" to "layerid=" change was introduced in 2016-06-30, according to ChangeLog, to fix #15168
-
- *Results for 2.14.7 with GDAL/OGR 2.1.1 (installed with osgeo4w) using the following commit:ed8807c
Layer source for... -
- Ok now I see the 2.14 thing.
I was confused by the fact that I was opening a project saved with 2.16.
When you open a... -
- Jérôme Guélat wrote:
> Thanks for having a look at this problem... Here's what I get (using Windows, btw.):
>
> 2.14... -
- vector2 has 2 layers, loading both results in one having 'layerid=1' and the other not having any 'layerid' in the Da...
-
- Sandro Santilli wrote:
> This boils down to the "Layer source" being incomplete for the loaded layers
> (double click... -
- Thanks for having a look at this problem... Here's what I get (using Windows, btw.):
2.14.7: layer source complete i... -
- This boils down to the "Layer source" being incomplete for the loaded layers
(double click on the loaded layers to ve... -
- Actually, I cannot confirm 2.14 is fine.
Following the code it seems that he "layername" is extracted from the input ... -
- When renaming a schema in the DB-Manager, the path of default values is not renamed.
-
12:17 PM Feature request #15119: on screen snapping indicator
- I think a great improvement would be also to see where the first click was! Like a large circle and then, maybe an au...
-
- Looks to be working again in 2.16.3.r85.g34c049d-1
-
09:21 AM Bug report #15709 (Closed): bad match of valeurs with virtual layer
- The values no match in the table of virtual layer with the source layer.
The difference is visible in:
- the disp... -
06:35 AM Bug report #15708 (Closed): qgis master error during cmake configure
- -- QGIS version: 2.99.0 Master (29900)
-- Could not find GRASS 6
-- Could not find GRASS 7
-- Found Proj: /usr/lib/li... -
- Hi,
a few questions:
is the "(I) button" the identify tool?
what is the wms server, geoserver?
what is the platfor... -
- I am sure it's not related to that fix, since it only removes a debug line...
Needs fixing anyway. -
- after fix patch of #15677
dissolve causes a crash (minidump) when a field is used.
ok when dissolve all.
OK with QGI...
2016-10-13
-
- I have connection with unspecified host/user to rely on libpq defaults (including env variables).
Using "Import Vecto... -
- These should be fixed already.
The only thing not fixed is your last suggestion about the dest crs, since that is a ... -
- Also confirmed with 2.16.3, while 2.14.7 is fine
-
- So even with OpenFileGDB driver I confirm the issue, but the issue for me happens with both input datasets. This is w...
-
- Figured, I could open it (http://gis.stackexchange.com/questions/26285/file-geodatabase-gdb-support-in-qgis) -- but I...
-
- Sorry for being so lame, but could you please explain step "1. Open a vector layer stored in a file geodatabase (I'm ...
-
- More details: apparently QGIS 2.14 is doing it correctly only if at least 2 datasets are stored in the file geodataba...
-
- Of course! Here's one...
-
- Could you please attach a minimal geodatabase to reproduce this ?
-
- Could you please attach a minimal geodatabase to reproduce this ?
-
- The Processing tool "Import Vector into PostGIS database" (in GDAL/OGR) doesn't work if the vector layer comes from a...
-
- To the best of my knowledge copying tables by D&D also succeeds now. If you can test, the working code is in master_2...
-
- Fixed in changeset commit:"5abdfcb8064f3b3a848358afb95723b932dd3b05".
-
- Sandro, it's great to see this bug fixed.
Sandro Santilli wrote:
> Views are affected, while real table aren't (or ... -
- So with PR https://github.com/qgis/QGIS/pull/3599 I've made PostgreSQL layer importer (createEmptyLayer) support quot...
-
- I confirm it should be createEmptyTable, within the Postgres provider, to interpret the URI.
Hopefully the semantic o... -
- On further research, I found that we get quoted identifiers in the url when the primary key type is a FidMap. This ha...
-
- Sandro Santilli wrote:
> Jurgen, once again this issue is about properly defining semantic for some fields.
> In this... -
- Jurgen, once again this issue is about properly defining semantic for some fields.
In this case is the "keyColumn()" ... -
- Victor, I've renamed the title of this issue and have removed the assigned to value to indicate the need to address t...
-
- Victor, I've renamed the title of this issue and have removed the assigned to value to indicate the need to address t...
-
- Yes, I'll backport it to the current stable releases too so it'll be in the next point releases. Just going to test a...
-
12:17 AM Bug report #15696: Layer effects having unexpected render issues in Print Composer
- Thankyou Nyall, you are awesome!
To anyone who says "it's open source, so you just dont have the technical support of... -
- Fixed in changeset commit:"a0bfc10c568e3e4f54a7f43ca285e2e7b11a194a".
-
- Perfect - exactly what I needed, thank you. Looks like the issue is caused by the marker line style drawn underneath ...
-
- Hi Nyall,
I've managed to strip back the project and isolate when the problem occurs a fair bit!
The attached projec... -
- I must have been wrong, since QGIS 2.8.1 throws the same error. To me, 'Create single-part geometries instead of mult...
-
- Fixed in changeset commit:"721d3c5bfbd33f00ab675edebb3d3aa3854352e3".
-
- An issue has slipped into the composer table item in master whereas the inlined color picker panel is inaccessible wh...
-
- Thx!
-
- Fixed in changeset commit:"de85fdd6e8fa3d4f38196376aabccce317cbf341".
-
- The state of collapsed groups or layers is only saved if this small triangle icon left to the layer's name is used.
-
- Hi Martin, I've uploaded a screencast to demonstrate the issue.
-
- So... if you save a project with some groups or layers collapsed, they are still shown expanded when you load the pro...
-
- See also: #15704 (Duplicate)
-
- To me, this should work similar to the application switcher (@Alt+Tab@, @Alt+Shift+Tab@) in Ubuntu/Unity. The 'Manage...
-
- Hi Nyall, it seems that 'layer groups' was the former name for presets (see 'Manage Layer Visibility' icon). So this ...
-
- See also #11183
-
- A shortcut to switch between layer visibility presets (@Crtl@+@Tab@?) would be really helpful.
-
- Nope, that's just the thing, I didn't catch it with the test data.
I will try to isolate it tomorrow.
Thanks Rene!
... -
- Hi Tudor,
Can I reproduced the problem with the data you provided ?
* qgis_server_stilying_problem.zip
* qgis_bug_te... -
- @Rene-Luc Although testing with the provided test data works good, my production project has problems.
I can replica... -
- It shouldnt make sense to run a single line. If there is something you want to do with a single line, you can do it w...
-
09:08 AM Bug report #15703 (Closed): Cannot run batch processing with only 1 row of parameters
- When the Batch Processing window first opens, there are three empty rows of parameters. Clicking on the "red minus" ...
-
- Reinhard I guess you had an installation problem, since you cannot reproduce on your laptop.
Feel free to reopen if y... -
- Reinhard I guess you had an installation problem, since you cannot reproduce on your laptop.
Feel free to reopen if y... -
- Reinhard I guess you had an installation problem, since you cannot reproduce on your laptop.
Feel free to reopen if y... -
- It would be useful if the "Layer Properties" --> "Metadata" --> "Properties" text would include information on compre...
-
07:39 AM Feature request #15701 (Open): Show Symbology (e.g. City-Markers) only when an associated label c...
- The current QGIS labeling engine offers options to hide labels if there is not enough space available to display them...
-
- Fixed in changeset commit:"ba98e2d5895bbf68fc23eabb4eaa78a62cf769e5".
-
- Fixed in changeset commit:"11326245fae6b4f7946c950ec5ba2a8151e95c44".
-
- Maybe you SAGA version is unsupported by Processing. Which SAGA do you use?
-
05:09 AM Bug report #15700 (Feedback): styling dock enabled for embed layers
- The dock is enabled for embed layers while it should not
-
- When draging layers from legend of a first QGIS app to another one the layers are removed from it.
I think it would b... -
- Fixed in changeset commit:"5adb90d199eb3020ea5211c0c32f4dad0d7dea9a".
-
04:24 AM Bug report #15689: crashing when opening a project containing WMS layers
- Nyall I'm not sure when I'll be able to get around to building a debug version.
Martin
It just opened for me but I ... -
- Hi Gavin
Few questions :-)
- can you confirm the problem persists if you disable all plugins?
- can you confirm th... -
- How did you do the export with and without reprojection? Do you have source WMS/WMTS to replicate it?
Anyway, it can... -
- I did a "brutal" test substituing ssleay.dll and libeay.dll with 1.0.2 version: https://indy.fulgan.com/SSL/openssl-1...
2016-10-12
-
- This change broke drag & drop copying of views from DBManager, see #15226
-
- Views are affected, while real table aren't (or so it looks).
The bug was introduced by the commit fixing #13710 (com... -
- Yes, I can reproduce with the table you provided. And not with other tables. I'm on it.
2.14.7 is not affected, 2.16.... -
- Yes, I can reproduce with the table you provided. And not with other tables. I'm on it.
2.14.7 is not affected, 2.16.... -
- Yes, I can reproduce with the table you provided. And not with other tables. I'm on it.
2.14.7 is not affected, 2.16.... -
- Here comes a sample database. Please let me know if this is helpful for locating the issue.
-
- Here comes a sample database. Please let me know if this is helpful for locating the issue.
-
- Interesting, can you inspect the two tables (the one which works and the one which doesn't) with the "psql" command-l...
-
- Hi Sandro, I've uploaded a screencast. Unfortunately, I've no idea how to reproduce this issue.
-
- I've tried dragging the qgis_test.base_table_good table (part of testsuite in qgis_test database) into a new schema a...
-
- I've tried dragging the qgis_test.base_table_good table (part of testsuite in qgis_test database) into a new schema a...
-
- Reinhard can you help me reproduce the issue ? Where should I drag the table from ? Where should I drag it to ? Which...
-
01:41 AM Bug report #15302 (Closed): Wrong Text size of plugin description
-
- In progress... https://github.com/qgis/QGIS/pull/3598
-
- IF it's not a Processing bug, shouldn't we reopen it with another name to give it more visibility?
I think some devs... -
- Sharing some more experiment.
The following code *does not* work:... -
- There is indeed some change in the internals, not sure yet if it is related to SIP or to the switch to Python3.
It c... -
11:02 PM Bug report #15697 (Closed): r.fillnulls fails to work in processing toolbox
- Whatever I do, when I use r.fillnulls in processing toolbox I get this error and fail from there:...
-
- there is a LOT in the project... I'll see if I can strip it back but manage to retain the glitch!
-
- Jamie -
I hit this issue once myself but unfortunately lost the project and couldn't find a way to reproduce it. Is... -
- Hi,
I have search a bit and can't find any previous threads or reports of this issue...
We have encountered on numer... -
- Just to avoid further confusion in the future:
- the OSM plugin mentioned in comment 7 is looong gone (probably remo... -
- Reinhard let me know what you find, and what does it mean to "convert a multipart into singlepart" (augmenting the nu...
-
- As far as I remember former QGIS versions have converted the multipart geometries into singlepart geometries instead ...
-
- The shapefile contains record with multi-geometries, what would you expect from the "Create single-part geometries in...
-
- The shapefile contains record with multi-geometries, what would you expect from the "Create single-part geometries in...
-
- Duplicate of #15184
-
- Duplicate of #15184
-
- About "Returns a Geometry representing the points shared by this Geometry and other." -- the GEOS statement has nothi...
-
- Last commits:
* master commit:726bac5
* master_2 commit:21cfb7d
* release-2_16 commit:3906059
* release-2_14 commit:6... -
- Last commits:
* master commit:726bac5
* master_2 commit:21cfb7d
* release-2_16 commit:3906059
* release-2_14 commit:6... -
08:09 AM Bug report #15435: Measure tools: default unit is hardcoded and doesn't follow choice in Settings...
- Actually, (i'm still a bit puzzled) forget my comment above about units change. Change is applied only if unit is the...
-
- Indeed and as pointed in #15436, changing(!) the (global) units settings directly apply to the measurement widget.
Ho... -
- Maybe, but silently change configuration of a dialog is not good. Note that it does nothing to do with clicking the "...
-
06:28 AM Bug report #15695 (Closed): QGIS server should not cache the layers in case of errors
- In a production environment, it's tough to ensure the services are started in the correct order. So, for example, you...
-
- Fixed in changeset commit:"898addfa3314ad23c17ee8d64f36c292a82b6cff".
-
- The issue I see here is that the extent parameter has no CRS
We can make the assumption that it's in the Project CRS... -
- Fixed in changeset commit:"a985d8c9f97554eaf84125bc6d458aa46088a0b5".
-
- I start to work on this. See pull-requests:
* for interpolation tools (https://github.com/qgis/QGIS/pull/3592 )
* for... -
- I start to work on this. See pull-requests:
* for interpolation tools (https://github.com/qgis/QGIS/pull/3592 )
* for...
2016-10-11
-
11:53 PM Bug report #15694 (Closed): Invert color ramp not working with raster
- With any singleband raster the invert color checkbox does not work anymore. Tried any combination (hit the checkbox a...
-
- Fixed in changeset commit:"2665eb50a69220324f4a6d045e8eba6601760dd3".
-
- Fixed in changeset commit:"53c3ed2dc02baf43c3a5cc7323f37869f434f25a".
-
- Can you reshare the sample data?
-
- Can't reproduce - was likely fixed by commit:449fcad
-
- Can't reproduce - was likely fixed by commit:449fcad
-
- Hmmm not much to go on there. Are you able to self build a debug version? I can't reproduce any crash with the projec...
-
- The guilty project file is attached. The localhost layer won't work for you as it is an ssh tunnel. ...
-
- Can you provide a backtrace from gdb? (Type 'bt')
Are you able to share your project? -
- I often have this problem - when I open a project containing WMS layers, it crashes and I have to create it from scra...
-
- The query tool in pgAdmin III has implemented this feature. It's quite helpful for complex queries that take longer t...
-
- You need to provide a lot more detail:
- wms details
- what is displaying which is not correct
- attach a sample pro... -
07:38 AM Bug report #15690 (Closed): WMS layer with EPSG:32717 is not displayed correctly
- How i can correct this, plz
-
- The DB-Manager freezes every time when running more complex SQL queries. Using the query tool in pgAdmin III the same...
-
- When opening a .qgis file all groups and layers are displayed expanded. It seems this issue is a regression: #2908
-
- I've filed a PR with a testcase and a revert of the offending commit:
https://github.com/qgis/QGIS/pull/3590
The te... -
- Sandro Santilli wrote:
> I see by default there's always "text edit" as the edit widget associated with floating poin... -
- I see by default there's always "text edit" as the edit widget associated with floating point fields, but I'm no expe...
-
- Sandro Santilli wrote:
> I also confirm the other fix is to perform unit-addition in QgsPostgresProvider::convertFiel... -
- I also confirm the other fix is to perform unit-addition in QgsPostgresProvider::convertField, but then the QgsField:...
-
- Tested on all branches and it works.
I'll let you close the issue.
Thanks a lot for your very nice work. -
04:48 AM Bug report #15688 (Closed): Georeferenced Image files cannot be opened or new image files georefe...
- when trying to load georeferenced image files (i.e. static OS maps), i get an error saying invalid data source. This...
-
- Larry Shaffer wrote:
> Giovanni, do you mind compiling the fix and testing for your scenario (either @master_2@ or @r...
2016-10-10
-
- I confirm that removing the unit-subtraction from QgsOgrProvider::loadFields fixes the import.
The QgsField::length m... -
- So upon further digging, I've found that OGR correctly reports width as 19 (which would accept the value) but QGIS is...
-
- Actually, I'm taking this back. shp2pgsql, which uses shapelib, reports the field to have width=19 and precision=11, ...
-
-
- Ok I was wrong, shp2pgsql (from PostGIS) behavior is to specify a width, but not a precision.
Doing so within QGIS re... -
- PostGIS loader (shp2pgsql) behaves as QGIS-2.14, sing "numeric" only when DBF width is > 18.
What was the rationale t... -
- Error confirmed with 2.16.3:...
-
- Error confirmed with 2.16.3:...
-
- Epsilon is still present in some dialogs, see attached.
-
- Epsilon is still present in some dialogs, see attached.
-
- Epsilon is still present in some dialogs, see attached.
-
- Should not be an issue with current releases - please file specifics if you can find any remaining occurances of the ...
-
- Should not be an issue with current releases - please file specifics if you can find any remaining occurances of the ...
-
- Expected may be from dev point of view, certainly it is surprising for the user.
-
- This is expected behaviour - you'd need to use symbol levels and place the centroid fill above the polygon fills to h...
-
- This is expected behaviour - you'd need to use symbol levels and place the centroid fill above the polygon fills to h...
-
-
- Oops - wrong issue
-
- Sorry, cannot test now on master. On latest 2.16 it is.
-
- Still an issue on master?
-
- IS this still an issue? Can you attach a project?
-
- Fixed in 2.18
-
- Fixed in 2.18
-
- Not reproducible on master
-
- Not reproducible on master
-
- Fixed in master
-
- Fixed in master
-
- Fixed in master
-
- Fixed in master
-
- Is this still an issue with current supported releases?
-
- Should not be an issue with current releases, please re-open if you can reproduce.
-
- Should not be an issue with current releases, please re-open if you can reproduce.
-
- Closing due to lack of feedback, and substantial changes since this was filed
-
- Closing due to lack of feedback, and substantial changes since this was filed
-
- Fixed in changeset commit:"90aebd117d7a936e606d4993b0bc6ccc7f64080d".
-
- I'm tracking all z troubles in QGIS. Can that issue be closed or is it still opened ?
-
- Fixed in changeset commit:"d4323addf04e0a1bdccec2127c7b2b8a59661799".
-
- Not reproducible in current versions
-
- Not reproducible in current versions
-
- Upstream issue, not a qgis issue.
-
- Fixed in recent versions
-
- Fixed in recent versions
-
- Not an issue in current versions
-
- Not an issue in current versions
-
- Can you confirm this is still an issue on newer qgis versions?
-
- Fixed in commit:313fe6a98f06cc4094ace211fc3a191aa0497cd6
-
- Fixed in commit:313fe6a98f06cc4094ace211fc3a191aa0497cd6
-
- Was fixed in commit:45681e6e0a007ecb1b9b543de5b4d8ce123dd602 ( qgis 2.10)
-
- Was fixed in commit:45681e6e0a007ecb1b9b543de5b4d8ce123dd602 ( qgis 2.10)
-
- Not an issue on the newer processing version - tested with 500k point file, speed is comparable to saving a copy of t...
-
- Not an issue on the newer processing version - tested with 500k point file, speed is comparable to saving a copy of t...
-
- Fixed for a while now
-
- Fixed for a while now
-
- This is a Qt issue - not QGIS
-
- This is a Qt issue - not QGIS
-
- I reopened it because we found a memory leak in my previous fix.
Can you test my new fix ?
* master commit:e34116d
*... -
- my OSGeo4W qgis is using ssl version:
ssleay.dll v1.0.1.7 -
- not confirmed on Linux.
removing or adding CA and running "update-ca-certificates" (debian/ubuntu) and then:
QgsAuth... -
- While #11616 could enhance Processing as a whole, this issue (#14430) can be addressed separately.
That is, for GDAL/... -
- While #11616 could enhance Processing as a whole, this issue (#14430) can be addressed separately.
That is, for GDAL/... -
- While #11616 could enhance Processing as a whole, this issue (#14430) can be addressed separately.
That is, for GDAL/... -
- Fixed in changeset commit:"0c4bf943c141ff88519ee7e2474d828230c84272".
-
- Fixed in changeset commit:"c1cf896c1a76fdac16b3e800b7e1f106f983e299".
-
- Fixed in changeset commit:"ddfe91f76342578934398f9cc56aa68e4e525020".
2016-10-09
-
- during dev I found a possible bug reported in #15687
-
- It works as it should now. Tested under LTR, 2.16, master and master_2.
Thanks a lot René! -
- I found a misalignement in SSL Root Certificate Authorities (CAs) caching at least in WIN. This bug has been found de...
-
- When saving images from WMS/WMTS to a projection not native to the source online dataset, reprojection is performed a...
-
- I can confirm the crash on loading in 2.16.3 (build #7d00cae). But the project opens fine in QGIS 2.x master (2.17, b...
-
10:59 PM Bug report #13494: QgsApplication.initQgis leads to segfault
- Martin Dobias wrote:
> Maybe better to address that in 3.0 that would set a requirement that QGIS libraries can be o... -
-
- Ok, this goes beyond processing, something is broken at the sip level. Here's a greatly narrowed steps to reproduce t...
-
- Ok, this goes beyond processing, something is broken at the sip level. Here's a greatly narrowed steps to reproduce t...
-
- It's an important issue, no doubt, but i dont understand how a layer object can be missing that method... It's puzzli...
-
- I've noticed a serious regression under processing, which results in processing being unusable after a first algorith...
-
- Not sure if this affects also other gdal tools.
-
- Input: http://svn.simo-project.org/tools/trunk/txt2latlon/data/gt30w020n90.tif
1)
On QGIS 2.16 with gdal 1.11 (QGIS... -
09:56 AM Bug report #15684 (Closed): Crash when creating snapshot with vector layer from command line
- Creating a PNG snapshot from the command line on Linux of a map containing a vector layer causes a segmentation fault...
-
- Since length is also available for geometries, it should also be listed in the Geometry section of the expression bui...
2016-10-08
-
- Processing's exportVectorLayer() function (dataobject.py's line 296) is broken under master as the code calls decode(...
-
- Larry Shaffer wrote:
> Can you give me a description of how you see this implemented, i.e. psuedo code or whatever?
... -
02:30 PM Bug report #13494: QgsApplication.initQgis leads to segfault
- Sorry, I apparently forgot about this issue.
Martin Dobias wrote:
> Larry - would it be possible to do lazy initiali... -
- Fixed in changeset commit:"3a76708bcb4785f5fe930be0b18396e5fa87031f".
-
01:09 PM Bug report #14371: QGIS Locks All Files Within a Folder
- I now have 2.14.6 installed and the issue no longer exists so it must have been fixed somewhere along the line.
Thanks -
- * load a 4326 raster
* reproject in 3857
* clip by selecting an extewnt on the canvas with either GDALTools or with...
2016-10-07
-
- Any idea when GDAL 2.1.2 will be released?
Also, has the new QGIS error check been added to both the LTR (2.14)and 2.... -
- Giovanni, do you mind compiling the fix and testing for your scenario (either @master_2@ or @release-2_16-ows-fixes@ ...
-
- Hi,
I have a PR for (maybe) fixing this:
https://github.com/qgis/QGIS/pull/3576
More specifically:
https://github.c... -
- Even Rouault wrote:
> Isn't that a duplicate of #15360, now fixed ?
In what revision was this fixed? I just updated ... -
- Duplicate of #15634
-
- Duplicate of #15634
-
04:19 AM Bug report #15674 (Closed): QGIS crashes when escape is pressed in 'Symbol Selector'
- Hi, I'm using QGIS 2.16 Nødebo and have noticed that every time I press the Escape key in the 'Symbol selector' windo...
-
- If you use QGIS' canvas rotation feature and have raster images in your map, they will look much worse than intended....
-
07:51 AM Bug report #15678 (Closed): QGIS does not read georeferencing information from jpeg files
- Georeferencing of JPEG files is supported in GDAL but QGIS ignores the information and asks for georeferencing inform...
-
- Hi Tudor,
I have probably fixed it:
* release-2_14 commit:e0c281e
* release-2_16 commit:8815f2e
* master_2 commit:ad... -
- Hi Tudor,
I have probably fixed it:
* release-2_14 commit:e0c281e
* release-2_16 commit:8815f2e
* master_2 commit:ad... -
- Hi Tudor,
I have probably fixed it:
* release-2_14 commit:e0c281e
* release-2_16 commit:8815f2e
* master_2 commit:ad... -
- Fixed by GDAL trunk r35631 (2.2dev) and branches/2.1 r35632 (for 2.1.2) "PG: fix errors caused by missing geometry_co...
-
- Fixed by GDAL trunk r35631 (2.2dev) and branches/2.1 r35632 (for 2.1.2) "PG: fix errors caused by missing geometry_co...
-
06:13 AM Bug report #15193: Print composer performance at startup
- I think this is a duplicate of #10828, perhaps the OP could confirm this
-
- Then I guess it's platform specific ? Can you obtain a valgrind report or gdb stacktrace ?
-
03:58 AM Bug report #15664: Dxf2shp Converter crash in 2.14
- I tried with 2.14.3, 2.14.5, 2.14.7 and 2.16.2.
Checking and unchecking all the option and with all the 3 kind of obj... -
- I could not reproduce with final-2_16_3-45-g61a0a1e either (from the 2.16 branch). Which version did you try exactly,...
-
- QGIS a9850ae from master_2 (2.18-pre) running on Ubuntu 16.04 64bit imports polylines and polygons and points from th...
-
-
- This has been fixed in GDAL 2.0
-
- This has been fixed in GDAL 2.0
-
- This has been fixed in GDAL 2.0
-
- This has been fixed in GDAL 2.0
-
- at runtime processing return :
Traceback (most recent call last):
File "C:/PROGRA~1/QGIS2~1.16/apps/qgis/./python/pl... -
- The OGR Shapefile driver starts FIDs at 0 indeed
-
- This issue was solved in QGIS 2.16.0 for a set of OGR drivers like spatialite, GPKG, etc...
-
- This issue was solved in QGIS 2.16.0 for a set of OGR drivers like spatialite, GPKG, etc...
-
- This issue was solved in QGIS 2.16.0 for a set of OGR drivers like spatialite, GPKG, etc...
-
- I tried with a .txt file and a GeoTIFF file and didn't hit that issue with QGIS 2.16.3 on Win7. Could you try to crea...
-
- Cannot reproduce with latest QGIS 2.16.3 / GDAL 2.1. The OSM driver triggers, but doesn't like this file, which is an...
-
- I've committed an improvement in GDAL per https://trac.osgeo.org/gdal/changeset/35630 (will be in GDAL 2.2) to transf...
-
- I've committed an improvement in GDAL per https://trac.osgeo.org/gdal/changeset/35630 (will be in GDAL 2.2) to transf...
-
- I've committed an improvement in GDAL per https://trac.osgeo.org/gdal/changeset/35630 (will be in GDAL 2.2) to transf...
-
- When I execute v.dissolve under QGIS 2.16.3 32-bit with GRASS 7.0.5.
I get an error :
extract (message in french) :
... -
- Fixed in changeset commit:"a5a18c2eb1677b6d27b45adff0cb296c5677dd7b".
-
- When trying to reproduce #10485, I noticed a regression. Now aAttribute table no longer shows features with OGR Geome...
-
04:42 AM Bug report #14685: Missing namespace declaration in the GetFeature request
- Even Rouault wrote:
> I looked at the above links, but couldn't find an example of a server + layer that would requir... -
- This was fixed in GDAL 2.1.0 per https://trac.osgeo.org/gdal/ticket/4954
-
- This was fixed in GDAL 2.1.0 per https://trac.osgeo.org/gdal/ticket/4954
-
- The issue is in the Freexl library that uses ANSI file API, and not unicode ones.
-
- Has been fixed with GDAL 2.1
-
- Has been fixed with GDAL 2.1
-
- The "http://tools.wmflabs.org/wiwosm/osmjson/getGeoJSON.php?lang=de&article=Hombrechtikon" URL no longer responds. An...
-
- OSM/PBF files are extremely GIS unfriendly and, unless very small, require conversion to another format to be used in...
-
-
- Note: my non-crashing tests were made on Ubuntu 16.04 with Qt 4.8.7
-
- I've tried loading the .ui file in final-2_16_3-45-g61a0a1e and final-2_14_7-32-g35ddf1f, and both load the .ui just ...
-
-
- @regis Is the issue still uptodate ? Is there any file to reproduce you could attached ?
-
- @Ervin, could you provide a self contained script + dataset that reproduces the issue ?
-
- Fixes require GDAL 2.1.2 or above. Linked to #15570 and #15393
-
- Fixes require GDAL 2.1.2 or above. Linked to #15570 and #15393
-
- Fixes require GDAL 2.1.2 or above. Linked to #15570 and #15393
-
- Fixes require GDAL 2.1.2 or above. Linked to #15570 and #15393
-
- Fixed in changeset commit:"3a906a188cf2f238003a15f56b0b5177dcf87a2c".
-
- Fixed in changeset commit:"c093d5188fad685c4a596ff23c27aad7d151dac2".
-
- Closing. This ticket is not managable and #15407 has been opened
-
- I have had a look at that. The issue is that in GDALTools the rasterizer offers a save box that list all GDAL support...
-
- Please provide:
1. steps to reproduce your problem
2. some testing data
3. the expected result
4. the actual (wrong)... -
- Please provide:
1. steps to reproduce your problem
2. some testing data
3. the expected result
4. the actual (wrong)... -
- Backport to master_2 is not practical at all.
-
- Backport to master_2 is not practical at all.
-
- Backport to master_2 is not practical at all.
2016-10-06
-
- Fixed in changeset commit:"893263952d190d9abc2f239fa513cb327df77bee".
-
01:16 AM Bug report #15612: QGis crashes when loading previous versions files
- 2 of the zip files are too big, so I couldn't upload'em.
I hope the ones uploaded are enough for our purpose.
In cas... -
- I'm uploading 6 zip files...
-
- I'm uploading 6 zip files...
-
- I'm uploading 6 zip files...
-
- I'm uploading 6 zip files...
-
- I couldn't reproduce a crash with the .qgs + 3 .txt you provided. Could you prepare a .zip with everything needed to ...
-
- Fixed in changeset commit:"5b2646cf0560a85899a7e258ff311daa91d48e94".
-
07:49 AM Bug report #15256: Unicode problem with plugin description
- Giovanni Manghi wrote:
> now I see this issue on Windows. On Linux (KDE) no python error, but this plugins do not sti... -
- Confusingly this variable appears but has no value when a marker line symbol layer is used.
-
- Actually I can reproduce - fix incoming
-
- Actually I can reproduce - fix incoming
-
- Can you check iface.mapCanvas().mapSettings().extent().width() and see if the value matches?
-
- > When I move the map and print with Python again, I see the new values. The @map_extent_width and @map_extent_height...
-
- Trying some silly things I found "Geometry generator" of feature styling to create wrong geometries when I used @map_...
-
- Thanks Even,
That's greats news.
I had a quick look on the Osgeo/GDAL site but couldn't see any information regardi... -
- The fix is in GDAL https://trac.osgeo.org/gdal/ticket/6672. This will land in GDAL 2.1.2
I've committed an improveme... -
- The fix is in GDAL https://trac.osgeo.org/gdal/ticket/6672. This will land in GDAL 2.1.2
I've committed an improveme... -
- Fixed in changeset commit:"e5f7cdcba44166b2f8aeb1a7a22f3175065e27bf".
-
- This is a (old MapServer) server issue. The response to GetFeature has a <?xml version='1.0' encoding="ISO-8859-1" ?>...
-
- I'm going to close that one as it is mostly implemented. Note: the only missing part is storedquery support. Would de...
-
- I'm going to close that one as it is mostly implemented. Note: the only missing part is storedquery support. Would de...
-
- I looked at the above links, but couldn't find an example of a server + layer that would require namespace. Do you ha...
-
- A more explicit error message is given now.
-
- No feedback from reporter and nothing really indicating this is linked to WFS
-
- I believe this was solved in 2.16
-
- Isn't that a duplicate of #15360, now fixed ?
-
- Fixed in changeset commit:"7182b1b871c594417b3598d5d0927529494ba253".
-
- ref: http://wiki.openstreetmap.org/wiki/QGIS_OSM_Plugin
-
- I'm closing it as it appears as 2.18 simply dropped the OpenstreetMap plugin from core.
Feel free to reopen if you ca... -
- I'm closing it as it appears as 2.18 simply dropped the OpenstreetMap plugin from core.
Feel free to reopen if you ca... -
- I tried reproducing with current master_2 branch (2.17) but I don't even get an "id" field with QuickOSM and I dont k...
-
- Andre does this still happen with current master version (pre 2.18) ?
Can you reproduce with a small spatialite datab... -
- Fixed in changeset commit:"1ebd5a454d9e580bbf04d42d619bdfd95ee07260".
-
09:59 AM Bug report #15671 (Closed): SAGA doesn't show up in Processing in 2.16
- In QGIS 2.14 on Mac I could access SAGA through the Processing toolbox. Now in 2.16 I can't. The path to the SAGA bin...
-
- Fixed in changeset commit:"b8ff71af4671165b61fa4f9a7f652e38e4f8bb18".
-
-
- When selecting KML, attributes are unselected by default. You should make sure to select (tick the checkbox) the attr...
-
07:39 AM Bug report #15670 (Closed): (Count) Points in Polygons is missing in he vector menu
- The tool "Points in Polygons" entry in the "vector > Analysis" menu is missing since 2.16.
-
- Hi Tudor,
I'm investigating to fixed it. -
- The fix is in GDAL https://trac.osgeo.org/gdal/ticket/6672. This will land in GDAL 2.1.2
I've committed an improveme... -
- The fix is in GDAL https://trac.osgeo.org/gdal/ticket/6672. This will land in GDAL 2.1.2
I've committed an improveme... -
05:09 AM Bug report #15639: labelling: line curved placement is broken
- Fixed it.
-
- I reproduced the issue. The problem starts at around scale 1:500. Probably a float/double issue. I'll look into it.
2016-10-05
-
- Assuming fixed, for lack of feedback. Salvatore feel free to reopen if you still see a regression.
Or open a new one ... -
- Fixed in changeset commit:"a4bdfb76c0c7a53d186eeb47cae8197fe052f634".
-
- Has any progress been made on resolving this issue?
It is causing constant grief and loss of data. Individually we ma... -
- Steps to reproduce
1. add a virtual field
2. switch layer to editable
3. try to rename field by double clicking = cr... -
- Yes - this is fixed.
-
- Yes - this is fixed.
-
- It is a feature shared by all formats that save an extent in their metadata (shapefiles have the same issues, unless ...
-
02:48 PM Bug report #15668: Raster Translate doesn't read output format
- I have come across this under Windows. By removing reg key for gdal tools, it started working.
-
06:21 AM Bug report #15668 (Closed): Raster Translate doesn't read output format
- The Raster -> Convert tool in version 2.16 on Mac (Kyngchaos install) no longer correctly reads the file type selecte...
-
- Currently Processing does not adopted to support Z/M/ZM values, so all similar algs are affected.
-
- Processing needs to be updated to support z and m geometry values supported by QGIS core.
For example, result of t... -
05:24 AM Bug report #15647: WFS client does not update layer list
- I managed to replicate Ari's problem. I had to update QGIS's settings for network caching. It seems the default is 0 ...
-
04:46 AM Bug report #15647: WFS client does not update layer list
- I checked this with Eduardo and his QGIS does not seem to store http request responses to cache. Why, we don't know b...
-
- In the expressions we now have nodes_to_points which allows the user to specify the desired behavior:
Syntax
nodes_... -
- Hi,
not sur if I must open a new ticket.
Currently only layer title is greyed out when canvas zoom level is out of ... -
02:41 AM Feature request #15666 (Open): Spatialite view and DB manager
- Hi,
I have created a database with spatialite_gui tool (spatialite version 4.3.0a), the database has some spatial ... -
- The need raises again, and more precisely.
The idea would be an option, stored in the project file:
- display datas... -
- Issues with the website are tracked "here":https://github.com/qgis/QGIS-Website/issues
-
- Issues with the website are tracked "here":https://github.com/qgis/QGIS-Website/issues
2016-10-04
-
- The install guide link on http://qgis.org/en/site/forusers/download.html points to master, which has changed radicall...
-
- fixed with https://github.com/qgis/QGIS/pull/3271#event-812724210 (?)
-
01:02 AM Bug report #15656: Loading QLR file with relative path does not work correctly
- Actually when saving a QLR the datasource path is relative to QLR destination folder, not the QGS one.
It seems this... -
- See http://docs.qgis.org/2.14/en/docs/user_manual/introduction/qgis_configuration.html#project-properties
You can ch... -
- The version 2.16 as well crashes.
-
- In the version 2.14 (all releases) of Qgis both for windows and mac when I try to convert a dxf in shp the software c...
-
- Hi. You should open another ticket as although your problem touches widget constraints the issue is different.
On th... -
- If one choose, from the bottom left dropdown menu, Show only selected, then Show all, the selection is correctly move...
-
- Fixed in changeset commit:"bc32b1fe5a9ac05f1763f45268eab833cc46e546".
-
- With some complex (and maybe a bit uncorrect geometries) like the one I attached here below, if the geometries valida...
-
- Fixed in changeset commit:"ddbd25d046ad514719b41c5f61f3c7fe34304a74".
-
- Fixed in changeset commit:"08f4a0f40cce21d5730653a75bdd44f175f3b0b8".
-
- I assume it's to customise the appearance and other measure tool settings. Maybe the button should be totally removed...
-
- I don't think this is a bug - I assume the behaviour is intentional to make it easier for users to immediately see th...
-
- I don't think this is a bug - I assume the behaviour is intentional to make it easier for users to immediately see th...
-
- Fixed in changeset commit:"03bff507d9814ec1a3d9fdfdbe5cfbc5b6274689".
-
03:57 PM Feature request #15662 (Open): Support setting custom HTTP headers in WMS layer request
- Allow addition of custom HTTP headers when adding a WMS layer. This will be useful when user wants to use for instanc...
-
12:34 PM Bug report #15550: Processing: activating a new provider causes QGIS to freeze for a few seconds
- Unfortunately it doesn't solve the issue.
-
- As I can see sorrecponding commit already presented in master_2 branch
-
- Measurement tools dialog window appears randomly (and sometimes not so random) when using other tools. Here is an exa...
-
07:11 AM Bug report #10560 (Reopened): Wrong feature count after edit
- The problem still exist with 2.16.2 after removing some features with PyQGIS codelines and commit changes.
Windows 7 ... -
- The problem still exist with 2.16.2 after removing some features with PyQGIS codelines and commit changes.
Windows 7 ... -
- Fixed in changeset commit:"d03d2069b96b2c25abe64588f54f24dab7ea7cc2".
-
- Should be fixed in master. Reopen if necessary
-
- Should be fixed in master. Reopen if necessary
-
- I believe the direction of the North arrow should be correct in the center of the map.
-
- Fixed in changeset commit:"7370ade7513fb1e9a4b6dd8ec51224b5c29b7754".
-
- Fixed in changeset commit:"421251abde27b2161bb18a737e1fca0f4cbd6f8a".
-
- Fixed in changeset commit:"f7c639c169b4b96aa963d8a7effc9723e8bc34a7".
-
- Fixed in changeset commit:"4bcdecd3cf87dd191c27bcb4d6419191f5ff8cb2".
-
- This is the report of the error:...
-
- This problem has been discussed many times in last years: when you delete a polygon deleting all the nodes, when you ...
-
- Fixed in changeset commit:"0b683637896f552b13f419f1fcabb9fe9fa2fdea".
2016-10-03
-
- I did some testing about this problem and no cache seems to be present for me. I have my own test geoserver where to ...
-
01:42 AM Bug report #15658: map tips does not show images correctly anymore... on Linux
- Enclosing content in divs worked as I posted in my answer on SE:...
-
- I faced with the same issue:
http://gis.stackexchange.com/questions/211117/map-tip-display-text-in-qgis-2-16-pictu... -
12:52 AM Bug report #15582: Union error: "global name 'vproviderA' is not defined
- Same error on Windows 7 64 bit with QGIS 2.16.3, both within QGIS and from a standalone script. Editing "C:\\OSGeo4W6...
-
- I can confirm this on 2.16.3 and Windows XP.
My plugin had unicode characters not in description but in about and ch... -
- Fixed in changeset commit:"111106c64fcf4288617e65fc160a2b6112606cfc".
-
- PR at https://github.com/qgis/QGIS/pull/3565 - also fixes the circular symlink issue.
-
- Some issues with DPI maybe? I do not have access to the WMS, so it is difficult to tell...
-
- Closing due to lack of feedback
-
- Closing due to lack of feedback
-
- Implemented in 2.16
-
- Implemented in 2.16
-
-
03:24 AM Bug report #15632: Style graduated not working correctly
- Martin Dobias wrote:
> It is not clear from your bug report what is the actual problem. Please note there are various... -
- It is not clear from your bug report what is the actual problem. Please note there are various modes for graduated st...
-
07:51 AM Feature request #6450: Allow QGIS to 'guess' field types for calculated fields in spatialite views
- Can someone estimate how much time it would take to solve this problem? Maybe we can look for a solution....
-
-
- Please attach the screenshots and the shapefile for testing - there are no attachments in this ticket...
-
05:54 AM Bug report #15649: Setting constraint for a range (dial) widget usability problems
- I have a similar problem.
When constraint Expression dialog write "NOW ()", "identifier" IS NOT NULL "or other, I for... -
- I have a similar problem.
When constraint Expression dialog write "NOW ()", "identifier" IS NOT NULL "or other, I for... -
- I have a similar problem.
When constraint Expression dialog write "NOW ()", "identifier" IS NOT NULL "or other, I for... -
- Actually the option under project properties to define relative or absolute save paths affects both QGS and QLR files...
-
- Hi,
I have some troubles loading QLR files with relative path. The path in the QLR is relative to the folder where... -
- Fixed in changeset commit:430694ba9a2beb5fe23d5814b63aaecdbee7a3d7 (the commit unfortunately references a different bug)
-
- Arrgh... this one is not fixed yet, I have only mistakenly mentioned this bug in my commit (it actually fixes #15596)
-
- Fixed in changeset commit:"430694ba9a2beb5fe23d5814b63aaecdbee7a3d7".
-
02:36 AM Feature request #15655 (Open): Discard from rendering polygon vertices located in the upper left ...
- When OTF reprojection is enabled, sometimes coordinates of vertices do not make any sense. Such vertices are then ren...
-
02:29 AM Bug report #15636: Field calculator "lpad()" operator does not work
- Maybe I was actually using a numeric field,
that would explain why only rpad was working
(10, 20, 30 are indeed legit... -
- I'm quite sure because rpad was working properly,
anyway i cannot reproduce anymore and closing,
if i'll understand w... -
- Algorithm TrainImagesClassifier (libsvm) starting...
/usr/bin/otbcli_TrainImagesClassifier
-io.il
"/media/fd/Dados...
2016-10-02
-
01:40 AM Bug report #15653 (Closed): Refactor fields
- Refactor Fields:
When I have a Shapefile with a field named "AREA" the default (preselected) Expression in Refactor f... -
- Fix confirmed, thanks
-
- Duplicate of #15634
-
- Duplicate of #15634
-
- Apparently some data formats (e.g. geopackage) load with better performance if they are opened in "read only" mode - ...
-
- My impression is that the server does not follow WMTS specification properly.
Info from GetCapabilities ... layer's ... -
- Fixed in changeset commit:"5b3f10a531765a8c3951fa35a33d7da5a0c27644".
-
- Fixed in changeset commit:"d36fb619b5a210406aaa50ed3aab59763f5f749a".
-
- Fixed in changeset commit:"29d2bef7954d4e2b2cf21611c1398d0a7666e4c6".
-
- PR with fix at https://github.com/qgis/QGIS/pull/3557
-
- Merging the shapefiles in the attached zip file with the "merge vector layers" from Processing the output is incomple...
-
- https://www.dropbox.com/s/b9yjtjrio3y91x4/int_processing_iterate.zip?dl=0
-
- Take the linked shapefiles, and try do a Intersection (QGIS tool) using the buffers with iterate against the land use...
-
- Nyall Dawson wrote:
> This was a an intentional change - see #7541
Hi Nyall,
yes, I was thinking about it and I susp... -
- This was a an intentional change - see #7541
-
- This was a an intentional change - see #7541
-
- I can't reproduce - are you sure you aren't storing the result in a numeric field?
-
-
- It turned out, that the excessive CPU usage was caused by another (broken) GeoPackage existing in the same directory....
-
- Duplicate of #15634
-
- Duplicate of #15634
-
- Sorry Alex, I have to reopen. On the latest master on osgeo4w:
2016-10-03T01:48:27 1 There were errors executing t... -
- Sorry Alex, I have to reopen. On the latest master on osgeo4w:
2016-10-03T01:48:27 1 There were errors executing t... -
- Martin Dobias wrote:
> Fixed in commit:42d88848f3010365d2c9fcf84b3a8ed5d52749a1
It seems that in QGIS 2.16.2 this pr... -
- Setting a range (dial) widget with a constraint and hitting that constraint while using the dial wheel shows the inva...
2016-10-01
-
- This was working as expected until 2.8.*
Tested on shapefiles. -
- Correction: The plugin description is ok on hidpi now but too big on regular screens.
-
- With 2.16.2 when one connects to a WFS provider the layer list is not updated after the first time Connect is pressed...
-
- Can you confirm all of them?
The feature count and save button as seen in the video are bugs.
Undo and Redo are not ...
2016-09-30
-
- Currently, there is no way to find / find and replace code in the Processing script editor. This restricts it's usabi...
-
- Can you update your build and retest? This should have been fixed a day or so ago.
-
- Load the attached shapefile
Change style from "single symbol" to "categorized", select "select2" in "column"
Click ... -
10:41 AM Bug report #15645 (Closed): OS X GRASS 7 processing command wrong setup
- Commit #e1ff6e896a8178c2f61930535ca91a408c3e2355 tried to fix GRASS 7 detection on OS X but for some reason inserted ...
-
- Hi, confirmed here with 2.16.3
Matthias, do you confirm?
-
- Hi, confirmed here with 2.16.3
Matthias, do you confirm?
-
06:31 AM Bug report #15644 (Closed): Qgis don't specify SRID on Sqlite/Spatialite export
- A layer exported to Sqlite/Spatialite gets SRID=0 by default instead of the SRID from the correct CRS.
SRID is define... -
- Open print composer, click on Page setup, change "orientation" from "portrait" to "landscape" and nothing happens.
... -
- Open QGIS, click on Optical Calibration from Orfeo, close it, this error message appears:
An error has occurred wh...
2016-09-29
-
- When creating a new field through Processing > Refactor fields, an expression seems always required. I do not think t...
-
- In first releases, removing the title still kept the space corresponding to title font at the top of the legend. And ...
-
- I've tested with 2.14.7 and it has the same behaviour. I'm not sure if this behaviour is by design - maybe it was don...
-
- Hi Nyall,
Can I have a use case where one would like to have the legend cropped (until nothing appears)?
I can see ca... -
-
- Fixed in changeset commit:"38a811b377cf7d0d50e2c76346eadfdd8ef87956".
-
- On master (2.99), the rendering of labels with curved placements over line is broken, whereas zooming into the canvas...
-
- The merging of this PR (https://github.com/qgis/QGIS/pull/3536) fixed the issue, closing. Thanks Nyall.
-
- The merging of this PR (https://github.com/qgis/QGIS/pull/3536) fixed the issue, closing. Thanks Nyall.
-
- I'm not sure it's useful to keep this ticket open, the bug in this ticket subject was fixed, better use the new ticke...
-
08:15 AM Bug report #15638 (Closed): Issue at attribute table cells update - Qgis 2.16.3
- Hello,
At each modification of datas in an attribute table cells, I get a crash application when I update the whole ... -
06:52 AM Feature request #8500: Add the ability to get the original GetfeatureInfo and GetLegendGraphic fo...
- We're also interested in this feature. We have a lot of external GIS data available as WMS and being able to identify...
-
- That's the debug output when it's rendered from the print composer:
server replied: Internal Server Error url:https:... -
- Fixed in changeset commit:"30580ed1e59aa7ada71d69957e035c8eba33f102".
-
- Ubuntu 16.04, QGIS 2.16.3
-
- In _Add ArcGIS MapServer Layer_ window, there's Export button. Suddenly doesn't work as suspected. I have defined som...
-
03:53 AM Bug report #15604: Accented characters allowed as DBF columns
- DBF standard defines ISO8859-1 as the default (and theorically the only accepted) encoding. We should guarantee suppo...
-
- Tested on a text field:
example:
1
2
3
lpad("fieldname", 2,'0')
expected result:
01
02
03
Thanks, Roy.
actual ...
2016-09-28
-
01:20 AM Bug report #15624: WMS in atlas
- there are confidential date in the project, i sent it on a privat channel to matthias kuhn
when i use the WMS-layer ... -
- There's not enough info here to diagnose. Please share a stuff contained project which demonstrates this behaviour.
-
- There's not enough info here to diagnose. Please share a stuff contained project which demonstrates this behaviour.
-
12:22 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
- My guess is that the issue is related to this one:
https://trac.osgeo.org/grass/ticket/3048
(GRASS does not write AUT... -
- My guess is that the issue is related to this one:
https://trac.osgeo.org/grass/ticket/3048
(GRASS does not write AUT... -
-
04:48 PM Bug report #15620: QGIS crashes when opening Settings -> Options dialog
- Thank you Jürgen, this has fixed the problem. I wasn't aware there was any config outside .qgis2 folder.
-
- Not reproducable here. (Re)moving @~/.config/QGIS/QGIS2.conf@ might also help.
-
- Commit commit:90887f4 (src/plugins/globe/cmakelists.txt) changed the linking from a MODULE type to a SHARED type. It...
-
- I spent the last hours replicating the issue, and was somehow successful in doing so. There are 2 different reliable ...
-
- I can confirm that the crashes are gone.
Thanks a lot for fixing this so quickly, Jürgen! -
- Fixed in changeset commit:"fb71f7232640e01c399dbb47ff940bc808e8c577".
-
- Steps to reproduce:
1. Load a vector layer
2. Open the layer properties
3. Select categorized or rule-based renderer... -
- Yes, this cropping is intentional behaviour if "resize to fit contents" is not selected. If you need the resizing the...
-
- One can resize the legend item so that none of its contents appears.
In previous release, you can resize the frame to... -
- Fixed in changeset commit:"dedf4a5ac69fdb19b5148cc98a4e6f9f35e7b78e".
-
- See subject.
-
- Hello
I am Jose and I have a problem with graduated style because it is not recognizing decimals and make the divis... -
06:12 AM Bug report #15631 (Closed): Selected categories saved in a preset changed when reordering feature...
- I have found a bug with the preset (a functionality which I really like).
1. I save a preset with the first 4 catego... -
- In legend properties, checking the "Resize to Fit contents" does what's expected. But despite the checked state, one ...
-
- When you add a legend to a print composer, by default, a string "Legend" is added as title.
If you remove this text, ... -
- Could you please share the geopackage that is causing this problem?
-
- Could you please share the geopackage that is causing this problem?
-
04:06 AM Bug report #15592: Adding WMS from Metasearch: GetCapabilities does not work
- Still worksforme. Trying to reproduce, when searching for land I get 640 results. Clicking on the first result (Sta...
-
- Using the settings tab allows the user a few options to manage OWS service names.
-
- Using the settings tab allows the user a few options to manage OWS service names.
-
03:18 AM Bug report #15627 (Closed): Icons not displayed in QGIS plugin manager for python plugins
- The QGIS-Plugin-Manager seems to have a bug. After installing python plugins there is no icon available in the plugin...
-
- This bug still exists in QGIS 2.16.3
2016-09-27
-
12:37 AM Bug report #15626 (Closed): GDAL-Tools (Raster menu) batch mode in QGIS 2.16 does not work
- The batch mode of GDAL tools (Raster menu) does no longer work under qgis 2.16 (Linux and Windows). translate and war...
-
- Tested again on qgis 2.16.2: searched `land` from geopole, clicked on Add WMS/WMTS, the Add WMS dialog opens, then it...
-
- Worksforme. Can you provide further details and use case so I can try to reproduce?
-
- When using the identify tool with the "layer choice" mode one gets a context menu with all the hits, if several featu...
-
- the map contains postgis-layers and a WMS-layer
the print composer atlas doesn't show the WMS-Layer
the WMS is not in... -
When I try to extract projection (make a TFW file) for a GEOTIFF in Sweref 99 TM projection I get this error. Worked...-
- just checked. The algorithm is correctly passing to SAGA the layers that are selected, and in the order in which they...
-
03:34 AM Bug report #15570: Shapefile data corruption
- Having the same issue here on QGIS 2.14.6.
I have noticed a few weeks ago the same bug and managed to avoid it by wa...
2016-09-26
-
- It should be possible to have a special type of action that works on a selection of features and not just on a single...
-
- It would be useful to get the number of selected features in a layer as variable (in layer scope) or for a given laye...
-
- QGIS 2.14.7, 2.14.1, 2.16.3 is freezing and crashing consistently when you try and open the Options -> Settings dialo...
-
- All 3 methods seem to be working fine. No errors raised, and results seems correct.
Looks like it is already fixed. ... -
- Thanks for answer, i wrote from cuenca - Ecuador and use SRS EPSG:32717 or EPSG:4326 and have a problem in wms in mu...
-
- Thanks for answer, i wrote from cuenca - Ecuador and use SRS EPSG:32717 or EPSG:4326 and have a problem in wms in mu...
-
- The same error on Windows 7 64 bit with QGIS 2.16
-
- Regarding the qgis-trusted-cas-cached.png attachment. The left part of the image shows the _default trusted root CAs_...
-
- The following steps demonstrate that QGIS/Qt is not able to trigger auto-importing of trusted root CAs by the Windows...
-
09:06 AM Bug report #15619 (Closed): ERS format not available in drop down file type menu for gdalwarp and...
- I have noticed that for some time now the ERS raster format has not been available in the drop down file type menu of...
-
- The "Expressions plus" plugin contains a useful function named isselected('layername'). This would be useful for a wi...
-
03:38 AM Bug report #15616 (Closed): large point markers not rendered if center is outside visible extent
- When using large marker symbols for point markers the symbols are not rendered if the point itself is outside the vie...
-
- Hi Devs,
Thanks for the latest update for GeoPackage solving db locks on concurrent writes (#15351).
However, after ... -
- There is a problem when adding an integer field to an existing geopackage. Here are some steps to reproduce the bug:
...
2016-09-25
-
- I attach a QGS file (version="2.14.0-Essen") and three CSV data files. If needed I can also upload the shapefiles and...
-
- I attach a QGS file (version="2.14.0-Essen") and three CSV data files. If needed I can also upload the shapefiles and...
-
- I attach a QGS file (version="2.14.0-Essen") and three CSV data files. If needed I can also upload the shapefiles and...
-
- I attach a QGS file (version="2.14.0-Essen") and three CSV data files. If needed I can also upload the shapefiles and...
-
- You'll need to attach a sample project for us to be able to diagnose this.
-
07:29 PM Bug report #15598: QGIS fails to display features near 180 degrees longitude at some scales
- Probably related - if ?I use the select rectangle tool for points crossing 180, I get a selection which lies W of the...
-
- Hi Victor
I just tested on QGIS 2.17 Master (today's version) and activating/deactivating a provider still freezes QGIS
2016-09-24
-
- Fixed in changeset commit:"07c3801ee30ede9512ab7d399bee2a4bfce6ea34".
2016-09-23
-
01:27 AM Bug report #14405: WMS layer with EPSG:32717 is not displayed correctly
- Can you give detailed instructions for re-producing the issue? Can you for example make it happen with some open WMS ...
Also available in: Atom