Activity
From 2013-11-14 to 2013-12-13
2013-12-13
-
01:42 PM Bug report #9184: Join attributes table fails to produce a correct attribute table if columns hav...
- not sure I did it right, but here's a pull request that fixes the issue for me https://github.com/qgis/QGIS/pull/1026
-
12:04 PM Bug report #8403: Toggling layer visibility to off doesn't work if you highlight a different laye...
- Thanks Giovanni... I couldn't figure out why you weren't able to replicate the issue, when all 20+ QGIS users here (a...
-
10:13 AM Bug report #8403: Toggling layer visibility to off doesn't work if you highlight a different laye...
- Brett Z wrote:
> I tested it some more and found it only occurs when there are PostGIS layer in the document. I tried... -
- I tested it some more and found it only occurs when there are PostGIS layer in the document. I tried a project with a...
-
-
- Brett Z wrote:
> I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I agree it mi... -
- Thanks Giovanni... I couldn't figure out why you weren't able to replicate the issue, when all 20+ QGIS users here (a...
-
- Brett Z wrote:
> I tested it some more and found it only occurs when there are PostGIS layer in the document. I tried... -
- I tested it some more and found it only occurs when there are PostGIS layer in the document. I tried a project with a...
-
- Brett Z wrote:
> I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I think it is... -
11:25 AM Bug report #9203: R Plots are blank on qgis64bit
- Yes, I can confirm that this problem is specific to the 64-bit version of QGIS. I ran both versions (32 and 64 bit) ...
-
07:23 AM Bug report #9212 (Closed): pyqgis_developer_cookbook example calls for xMin() instead of xMinimum()
- http://www.qgis.org/en/docs/pyqgis_developer_cookbook/canvas.html
In the "Writing Custom Map Tools" example, in the ... -
06:06 AM Feature request #9193 (Open): Differentiate add layer dialogs
-
05:35 AM Feature request #9193: Differentiate add layer dialogs
- Could someone re-open this ticket as it's not a duplicate. Thanks.
-
05:29 AM Feature request #9211: Optimisation: Don't render redundant features
- Mmm, not sure it is a good optimisation path. Most user do use blending modes and/or transparency options to visualiz...
-
- An optimisation: Don't keep rendering symbols that are all the same on top of each other.
Epitomised with: http://www... -
03:30 AM Bug report #6146: Offline editing tool broken
- Confirmed. I am experiencing the same.
2013-12-12
-
04:05 PM Bug report #9203: R Plots are blank on qgis64bit
- I think this bug is specific to the 64 bits version. Can you retry with the 32 bits version?
-
- The issue does seem to be similar to #7643, however, there are no solutions yet. From comments in #7643, I have trie...
-
- duplicate of #7643 ?
-
- I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I think it is related to #8403...
-
- I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I agree it might be related to...
-
03:05 PM Feature request #8725: Speed improvement in the render of geometries for qgis
- Hi all, There is a modification in behavior of this patch (https://github.com/qgis/QGIS/pull/980).
Now, it contains ... -
02:26 PM Bug report #6369: vsizip - relative paths not used & can't update path in "missing layers" dialogue
- I am the author of this functionality and I'll try look into this eventually...
-
02:04 PM Bug report #6369: vsizip - relative paths not used & can't update path in "missing layers" dialogue
- I can confirm this is still the case in QGIS 2.0.1
Especially that vsizip datasets can't be repaired when asking to ... -
01:49 PM Bug report #9169: Grass raster values not identified properly
- Is appears that you don't have the GRASS GDAL plugin installed. I am using QGIS and GRASS from KyngChaos. If you have...
-
08:26 AM Bug report #9202 (Closed): Can't write from python in integer fields of sqlite (not spatial) tables
-
- Ouch. Shame on me. It has been fixed already. I was launching "installed" qgis instead of the builded qgis.
Should i... -
- I build qgis from source, commit 221263db95fc on Dec 8, and i'm still having this issue. Maybe a 32bit problem?
I at... -
01:20 AM Bug report #9202 (Feedback): Can't write from python in integer fields of sqlite (not spatial) ta...
- Just tested here (64bit Fedora)
* spatial layer: has no @intfield@ attribute and therefore the code fails for this
*... -
- See Attached SLD. If I load it against my data (can't share that I'm afraid), QGIS just renders it all as grey. Looki...
-
04:09 AM Bug report #9208 (Closed): QGIS crashes when using addAttributes on any vector data provider
- During a course students with QGIS Dufour 64 bit (on Windows 7) reported crashes when using "QgsVectorDataProvider::a...
-
- landry - wrote:
> works fine on openbsd.
and works fine here on both Linux and Windows. -
01:36 AM Bug report #9200: Failure to display orthoimagery on windows in png or jpg format
- yes i have a limit on the server to prevent insane usage (ie MAXSIZE 3600 in mapfile) but the requests made by qgis i...
-
01:35 AM Bug report #9207 (Closed): window/panel resize problem
- I'm using QGIS 2.0 on a Panasonic Toughpad, running Android 4.0.3.
I once 'full-screened' my Layers panel and now it...
2013-12-11
-
01:50 PM Bug report #9200: Failure to display orthoimagery on windows in png or jpg format
- Works for me on 32-bit Windows and QGIS 2.0.1.
-
- here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a... -
- here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a... -
- here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a... -
- Fully reproducible on two qgis 2.0.1 installs on windows, try to load the public 'http://wms.craig.fr/ortho' server, ...
-
- One part of the fix could be
outFields = vector.combineVectorFields(layer,layer2)
-
- The 'results viewer' shows empty 'R plots'. This problem is very similar to what was reported 1 year ago (Bug #5882)...
-
09:51 AM Bug report #9169: Grass raster values not identified properly
- rcline - wrote:
> This is a duplicate of bug #4605. This has been a bug in QGIS on OS X since before 1.7 was released... -
- Fixed in changeset commit:"bdb560c05a9c3fc364339229e3377227b5ec86ae".
-
- On the Settings->Options->Network page, there's a item for "cache settings". It says "Size". This should state whatev...
-
- QGIS doesn't validate the capabilities. But the response from the server is missing a content type and so QGIS doesn...
-
- QGIS doesn't validate the capabilities. But the response from the server is missing a content type and so QGIS doesn...
-
- Following from - http://osgeo-org.1560.x6.nabble.com/WMS-layer-not-working-in-QGIS-td5093606.html
The WMS at this U... -
- Can you share the data that causes the issue?
-
- Can you share the data that causes the issue?
-
- Can you share the data that causes the issue?
-
09:36 AM Bug report #9201 (Closed): Select by Location Failure on complex polygons
- There is an issue with large complex vectors and the Select by Location tool.
I have a polygon which has 350,000 no... -
- I'm using the python console to automatice a process that includes copy values from a dbf layer to a sqlite (non spat...
-
- as it works now, a centroid is generated for each part of multipart polygons.
-
- Following from #9134
I'd suggest that only one column should be shown "Label". If label is empty then show the Objec... -
- One more quirk:
add view from add layer dialog => CAN edit (once fix the case issue),
<datasource>dbname='./OSP_Des... -
- Turns out, it's not a QGIS regression, it's an unintended side effect of a change in Spatialite 4.
https://www.gaia-... -
- Nicolas Cadieux wrote:
> See #9156. Both issue seem related.
this is fixed in qgis master. -
- other services that can be tested
http://www.pcn.minambiente.it/PCNDYN/catalogowcs.jsp -
- On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and Windows) by this service...
-
- On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and Windows) by this service...
-
- Sorry Jürgen, I wasn't clear. This isn't a duplicate (I opened the other issue too) and applies to WFS too.
See the ... -
- WFS selection window already mentions WFS and the rest is a duplicate of #9192.
-
- WFS selection window already mentions WFS and the rest is a duplicate of #9192.
-
- QGIS has lots of "Add layer" dialogs which all look extremely similar. How about adding some big text somewhere (and ...
-
05:36 AM Bug report #9101: Raster artefact in composer pdf export
- I bisected problem to the commit I indicated.
General test case:
1) Vector data set;
2) Raster data set with some NU... -
- I bisected problem to the commit I indicated.
General test case:
1) Vector data set;
2) Raster data set with some NU... -
- Fixed in changeset commit:"36c2f7f3a82e37547666ccd6b147de4f1b7253cc".
-
- 1) Open WMS\\WMTS dialog.
2) Click "New"
The "DPI-Mode" drop-down menu isn't available. You need to make whatever se... -
- Fixed in changeset commit:"36c2f7f3a82e37547666ccd6b147de4f1b7253cc".
-
- For both the WMS/WMTS and WCS add-layer dialogs, the text at the top of the box says "Add Layer(s) from a Server". Wh...
-
- Yep, this seems to be fixed in the weekly build. Thanks!
-
- 1) Connect QGIS WMTS to http://maps.warwickshire.gov.uk/gs/gwc/service/wmts
2) Add any of the three tilesets.
====
N... -
- Add "Referer" to the WFS and WCS new connection dialogs.
Possibly considerable as a bug because it's inconsistent wi... -
- "Edit", "Delete" and "Save" are also not greyed out at this point.
-
- 1) Add a server to WMS/WFS/WCS dialog
2) Delete that server (so there are now no servers)
The "Connect" button is st... -
- 1) "New" WMS/WFS/WCS connection
2) Only enter a "Name"
3) Can now press "Ok" - but the URL hould be mandatory as it's... -
-
03:08 AM Bug report #7495: compile error with Qwt 6.1
- It seems the error goes to QwtPolar - which needs to be built against Qt4. After I have recompiled QwtPolar and used ...
-
- Xavier Fung wrote:
> and a partial revert of the CMakeLists.txt changes in the above changeset.
Why? That should on... -
- looks like qwtpolar (or something else) is built against qt5, while qgis is built against qt4.
-
- I can build with external qwtpolar (using qwtpolar-svn) and a partial revert of the CMakeLists.txt changes in the abo...
-
01:05 AM Bug report #7495: compile error with Qwt 6.1
- fortunately, qwtpolar 1.1.0-rc1 has fixes for qwt 6.1.0 (http://sourceforge.net/p/qwtpolar/code/commit_browser) - qgi...
2013-12-10
-
- ArchLinux and Fedora 20 now offers Qwt 6.1.0. Is it possible to update QwtPolar to support Qwt 6.1.0?
-
08:04 PM Feature request #9188 (Closed): Add Inkscape-like color selection
- The selection options that [[inkscape|http://inkscape.org/]] uses in the "Fill and Stroke" menu for flat color would ...
-
06:11 PM Bug report #8964 (Reopened): GDAL Translate Problem on QGIS 2.0.1
- See #9156. Both issue seem related.
-
- See #8964
-
- Hi,
I also noticed that the -of switch is always on Gtiff even if a different file format is selected. If, for exampl... -
02:28 AM Bug report #9186 (Closed): Assign projection dialog issue
- Duplicates #6210
-
- Duplicates #6210
-
- Duplicates #6210
-
- Duplicates #6210
-
02:04 AM Bug report #7209: WCS client seems broken
- Gavin Fleming wrote:
> I'm getting this same error with QGIS master. With my own geoserver WCS I get
>
> WCS provid... -
- Fixed here.
commit from Oct 16 is there and the context menu is not black (i.e. looks good).
2013-12-09
-
- Reasoning: 2.5D layers are not supported by the plugin, but still available as source layers in the settings. This fi...
-
- Fixed in changeset commit:"758f5e5df9b31f9586af24f152a4dfefba1784ef".
-
04:10 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
- v.clean now works after using Giovanni's settings (I used break instead of snap before) and moving the data out of a ...
-
- Jonas, I just had a look at your latest log (v_clean)
I hope you are not afraid of a short test involving the edit o... -
> @Giovanni: yes, running shortest path with the cleaned files you attached worked so it feels like I'm getting clos...-
- Jonas Ohlund wrote:
> @Richard Im pretty sure the data isnt corrupt.
the data is not corrupt, but it can have geomet... -
-
06:48 PM Bug report #9185: Crash when perform some commands in Python console
- It looks like cause of my issue is #777.
-
- Open vector layer and select one feature. Then open Python console and run the following commands:...
-
- The same issue for "Warp (Reproject)" tool.
-
- * Raster -> Projections -> Assign projection
* Select raster file
* Click button Select Desired SRS
Selecting SRS fr... -
03:15 PM Bug report #8185 (Closed): QgsRasterFormatSaveOptionWidget "validate" button returns always "Valid"
- It works, I've tried on the latest master (commit:fc247672).
I close the ticket as invalid. -
- It works, I've tried on the latest master (commit:fc247672).
I close the ticket as invalid. -
03:11 PM Bug report #9183 (Closed): Wrong Icon when sorting a column in Attribute table
- Using Settings -> Options -> General and changing the Style from "Cleanlook" to any other Style did resolve my issue....
-
01:45 PM Bug report #9183: Wrong Icon when sorting a column in Attribute table
- This is Qt theme related to match the OS the theme is meant for. I use the Windows Vista theme and the sort order is...
-
- Sorting a columnshow a wrong side sorting indication
Sorting a field alphabetically (from null to z) should display... -
- fixed in master fc247672b059e04496986cb9a63429b3679e2c38
-
08:08 AM Bug report #9178: gdal_merge
- Thanks - this works! Hope it will be fixed.
Inserting this text
gdal_merge.bat -a_nodata -9999 -of GTiff -o "C:/Us... -
- What is the nodata value you are using, is it -9999 ?
Can you try to add the following to the command (by clicking o... -
- I have a problem while using gdal_merge from Raster>Miscellanious>Merge
While setting No data value the result comes ... -
- Done:
https://github.com/qgis/QGIS/pull/1024 -
- I get same crash in QGIS master.
I think that 'node tool' does not releases its 'QgsSelectedFeature' member after ro... -
06:40 AM Bug report #9181 (Closed): Crashes when trying to resume node editing after a rollback
- Repeatable crash! I'm using QGIS version 2.0.1 - Dufour, code revision ebebdf3. To create crash I do this:
Start QG... -
- The "Join attributes table" in "Vector general tools" fails to produce a correct attribute table if there are columns...
-
10:28 AM Bug report #3840: "additional no data value" has no effect (identify, raster calculator, histogra...
- I would not call it entirely new problem. I feel like these are all related. While true, that original negative fract...
-
- The new problem is not that additional no data value is ignored but that the original data source no data value (-999...
-
- Could you create +simple+ test project?
Does it work OK in 1.8? -
- While setting a style for a rasterDEM from 'Singleband Grayscale' to 'Singleband Pseudocolour' the range in Min Max c...
-
- rcline - wrote:
> This is a bug that seems to occur frequently on new installs. The problem appears to occur with all... -
06:00 AM Feature request #9180 (Closed): Shortest Path (Road Graph) plugin cannot handle 2.5D shape files
- Before (see #9174) QGIS crashed when the Road Graph plugin was used on 2.5D shape files.
The crash is fixed, and 2.5... -
- Embarrassing - for me - You are correct!
I´ve been using a projector, and my screen has changed size.
Thanks!
Rega... -
05:47 AM Bug report #9179 (Closed): Info-tool in rasterDEM
- The horizontal scrollbar makes me supposing the second column with values is hidden beyond the right edge. Please che...
-
- The horizontal scrollbar makes me supposing the second column with values is hidden beyond the right edge. Please che...
-
- The Info-tool does not show the values for coordinates or z-value
Using weekly from december 2. 2013.
http://screenc... -
- /KeepReference/ sounds better indeed.
-
02:24 AM Feature request #9176 (Closed): add layerid in record category for expressions
- it might be useful in layer actions if you want to edit features.
Hence, you can create generic action without explic... -
-
01:36 AM Feature request #6768: Diagrams: connect Expression builder to attributes and size fields
- Duplicate of #8682 ...
2013-12-08
-
- Adding a non ascii character in a script content fails on load, even with declaring # -*- coding: iso-8859-1 -*- on f...
-
- implemented in master
-
- implemented in master
-
07:58 PM Bug report #8996 (Reopened): Composer crashes QGIS when setComposition() method called
- There is /KeepReference/ argument annotation in SIP that should take care of these cases: increase the reference coun...
-
- @Richard Im pretty sure the data isnt corrupt. Same shapes works fine with ArcGIS at school. Could the "strange chara...
-
- I'm amazed with all your knowledge and grateful for your help. Internet is sure revolutionary in many ways!
@Giovann... -
- I'm amazed with all your knowledge and grateful for your help. Internet is sure revolutionary in many ways!
@Giovann... -
- yep, confirmed here. The v.cleaned data works.
Thinking it was a data related issue, I already tried to resave the s... -
- Jonas Ohlund wrote:
> Hi again,
>
> Many thanks for your quick assistance! It worked with Richards dutch shape file ... -
Crash confirmed here. Attached shp files crash both 2.0 and current master on Linux.
Running QGIS via strace and ou...-
- Hi again,
Many thanks for your quick assistance! It worked with Richards dutch shape file which brings me some hope ... -
- Hi again,
Many thanks for your quick assistance! It worked with Richards dutch shape file which brings me some hope ... -
- Yep, here on debian too: both 2.01 and master are working fine.
@jonas I'll sent you zip file with some dutch roads ... -
- it does not seems to crash while testing under Linux and Windows. Se please:
*) test on another platform and/or mac ... -
03:20 PM Bug report #9172: Random classifier does not use base symbol
- Tim - I don't understand the issue you're trying to describe here as it seems to be working correctly for me. Can you...
-
- This is a bug that seems to occur frequently on new installs. The problem appears to occur with all of the GDAL raste...
-
- This is a duplicate of bug #4605. This has been a bug in QGIS on OS X since before 1.7 was released. As a work around...
-
- Jeremy Palmer wrote:
> Hi Alvaro,
>
> Thanks for the reply. In that case it might be worth stating on the slider lab... -
02:31 AM Feature request #8725: Speed improvement in the render of geometries for qgis
- Hi Alvaro,
Thanks for the reply. In that case it might be worth stating on the slider label that it is a advanced ex...
2013-12-07
-
- *New description:*
with the attached shape "vagkartan_sv.zip" the road graph plugin crashes QGIS (tested on multiple... -
02:48 AM Bug report #9172 (Closed): Random classifier does not use base symbol
- The new random colour ramp classified is great but there is one usability issue: the base symbol is not cloned. The e...
-
02:42 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master
- QGIS 2.0.1
Same error.
Vector -> Geometry Tools -> Singleparts to multipart...
2013-12-06
-
- Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac...
-
- Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac...
-
- Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac...
-
- Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac...
-
- Hi, summarizing, We have implemented several shortcut changes in QGIS desktop application in order to make more agile...
-
-
- I forgot to attach GeoTiff
-
- Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N... -
- Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N... -
- Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N... -
- Fixed in changeset commit:"ba76c99037d84fb0fbc7d3eea7a3a6bcc5f69148".
-
- I suspect the following report is connected to this bug:
http://gis.stackexchange.com/questions/58101/how-to-avoid-c... -
- Closed due to lack of information. Please reopen, if you can attach affected data. Thank you.
-
- I cannot remember any recent complaints about this issue. Is this still active?
-
- Fixed for the integer case. It seems to work here with real, so if there is also a problem, please reopen this and at...
-
- Fixed in changeset commit:"b92e1243399ec5df9ea173d65e7a6509085a1111".
-
- Nice. Let me know when you are done, I will happily review your changes.
-
- I start working on it, but I don't know how to assign it.
-
- Thanks Mathias for the reference :-)
-
-
- Add expression support to the size attribute and the diagram attributes.
2013-12-05
-
- cannot confirm, at least on linux qgis/master
-
- cannot confirm, at least on linux qgis/master
-
- cannot confirm, at least on linux qgis/master
-
- When viewing a GRASS raster in QGIS, the identify tool will display the band value for a couple of time, but will eve...
-
12:02 AM Bug report #6146 (Reopened): Offline editing tool broken
-
Well, I have a close button in the titlebar now :-)
see screenshot
if you now could explicitly set this buttons, c...-
- There was raster reprojector after renderer also using color 0,0,0,0 for no data.
-
- Fixed in changeset commit:"330b46b8a9291fd81d88f6ff8092003c7aac8234".
-
- Fixed in changeset commit:"fd6e37cdcf226a05ef3da83f4a0f91b6ad9479be".
-
- After retrieving the layers from a oracle db connection (in Add Oracle Table(s) dialog), it is possible to click a ch...
-
- File bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
- File bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
08:19 AM Bug report #9167 (Closed): Numerical Vertex Edit in 2.0.1
- Hi,
the Numerical Vertex Edit appears to have a bug.
I edit a point shapefile and change the coordinates of the poi... -
08:18 AM Bug report #9138 (Closed): QgsGeometry.convertToMultiType() fails
- Fixed in changeset commit:"63c62adf213a9f1b1ba9cc07d4d7ae904e392503".
-
- I wonder if we should change all the QgsFields methods from [] to .value() which does check if the index exists at th...
-
- Fixed in changeset commit:"f428c869a980cc707da1fe96e2ba8ba763af78c6".
-
-
- Not reproducable here. Tried joining a shape with a csv and renamed the csv field on windows 64bit. no crash.
-
- If you have invalid field names in the expression of a label in a layer, QGIS will crash at start.
The crash occurs i... -
- Should be fixed in commit:f2fbb2f with help of the methods mentioned by EvanR/Etienne.
I could not reliably reproduc... -
- Should be fixed in commit:0bfc766488
-
- screen:
!http://i.imgur.com/beEcsO0.png!
printed:
!http://i.imgur.com/zdA79vGh.png! -
- When using curved labels on lines, labels are displayed correctly on screen but printed one above the other.
Weird......
2013-12-04
-
- Should be fixed in commit:e1186f164d. Please test.
-
- This is strange, because I have close button under Linux (screenshot attached) with OpenBox. Maybe this is related to...
-
- This is strange, because I have close button under Linux (screenshot attached) with OpenBox. Maybe this is related to...
-
- noone noone wrote:
> Thanks for discussing and fixing this issue :) But IMHO this shows that QGIS currently lacks a k... -
10:50 AM Feature request #9094: Del-key should delete feature
- Thanks for discussing and fixing this issue :) But IMHO this shows that QGIS currently lacks a keymap reference to av...
-
12:25 PM Bug report #9134: customization menu doesn't work
- I'm not able to write that code, sorry...
Maybe someone else can help with this issue, I think it wouldn't take much... -
- matteo ghetta wrote:
> Do you plan to do the same work with the Raster menu?
Not really. Could you create pull reque... -
- I could not find your commit in my git log, but I can read Copy in a black block here on master (linux).
Is there a ... -
- +1
I think we should maybe start some UI design group which could have a look into this kind of things, and formula... -
- hi, can you maybe share some dataset for which this is happening?
can you maybe also try on another computer or OS?
... -
- In fact,
I tested typing a sql query directly in the qgs file, and it fails to load project, when doing the same wit... -
- Hi all,
I miss the ability to create a datasource from a custom SQL query in Oracle.
Extending DBmanager (or have a... -
04:59 AM Feature request #8500: Add the ability to get the original GetfeatureInfo and GetLegendGraphic fo...
- Am I the only one interested in this bug? I miss the possibility to add external WMS layers to my projects and to hav...
-
04:54 AM Bug report #9162 (Closed): Crash when typing something into python editor
- When I write something into the python editor, QGIS crashes. When running from the command line, i get this warning:
... -
04:40 AM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
- Good point Matthias, maybe in a case where the new scale would be larger than the current scale the map should only pan.
-
- Considering your example: If you load Europe and want to zoom to an address in Berlin Kreuzberg but you are currently...
-
- H Matthias and Richard,
I had 1% in mind and was thinking of having a user-setting for this, if this setting is not ... -
Well, on a osm dataset, or another huge dataset you would not so easily select one point to pan to it (I think). So ...-
- you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ... -
- you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ... -
- you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ... -
02:55 AM Bug report #9161 (Closed): Gridding from SAGA fails. Output layers could not be open.
- Hi.
I'm using Qgis 2.1.0 and SAGA 2.1.0 modules. When processing the module Gridding/inverse distance(and more) I get...
2013-12-03
-
- Hi Bernhard,
How would you imagine this relation?
Would that work on e.g. an OSM dataset? -
- To reproduce: load a point layer, select one feature in the table and click "Zoom to selection"; the map is panned bu...
-
- I think an online resource is not feasible for this, because these expressions are mostly very data specific, and not...
-
10:07 PM Feature request #7878: Windows 8 Location Provider GPS Support
- As I expected it was the crap driver from DELL. I made it work with new driver from Lenovo - 19.14.8401.4 24 Nov 2012...
-
- Dbmanager currently reports a bunch of hints for optimising PostGIS tables, such as missing geometry indexes and tabl...
-
- Fixed in changeset commit:"bc825b4b46af8d8810abc4b5552921e891bf7bcf".
-
01:18 PM Bug report #9158: lpad() and rpad() functions do not work in standard way
- http://www.orafaq.com/wiki/LPAD_and_RPAD
http://www.postgresql.org/docs/9.1/static/functions-string.html -
- In PostGIS and Oracle, lpad('A', 5, 'x') produces 'xxxxA'. In the expression editor in QGIS, it produces 'Axxxx'. Sim...
-
- I added conversion to UTF-8 to WMS provider.
We should make QgsGmlSchema and QgsGml to support any encoding, probab... -
- Fixed in changeset commit:"9d17f25521d675d356ecde4a383d82ae28070df9".
-
- Jukka Rahkonen wrote:
> Why not to make InfoFormat selectable in the WMS server settings?
It could be useful but the... -
- Fixed in changeset commit:"a4c365c7cf9f4bb0a5811712d3c514a267363975".
-
- Materialized views don't appear in geometry_columns, but this is a fault of PostGIS. When PostGIS gets fixed, would t...
-
- Hi
Now we have all updated to the 2. december version - and now it works.
We also enconutered that we were unable to ... -
09:40 AM Bug report #9143: Label Expression Dump program
- I can not reproduce crash with 2.0.1 release on Mac.
Lene, do you have a custom Python expression function that is b... -
> All "weeklies":http://qgis.org/downloads/weekly/?C=M;O=D are standalone installer snapshots from osgeo4w.
yes I k...-
- Giovanni Manghi wrote:
> Lene Fischer wrote:
> > Hi Giovanni,
> > I´m using a total brand 'new' installation from wee... -
- Lene Fischer wrote:
> Hi Giovanni,
> I´m using a total brand 'new' installation from weekly. And my studets the same.... -
- Hi Giovanni,
I´m using a total brand 'new' installation from weekly. And my studets the same.
Regards
Lene Fischer -
- I asked a proposal to Martin Dobias to clean the legend code, API and UI.
If everything goes well, project should sta... -
- Hi Radim,
thanks for your work, well done!
Now it is possible to customize entirely the Vector menu. Do you plan to d... -
- Hi Radim,
thanks for your work, well done!
Now it is possible to customize entirely the Vector menu. Do you plan to d... -
- Fixed in changeset commit:"999a996b733925c78082ffdbd66afea2b7a2c813".
-
- Is this an issue that will be solved? Or maybe it needs some hints on the GUI/help side?
-
- It looks like a MSSQL provider issue. I don't have an MSSQL server to experiment with. Let's hope somebody with this ...
-
- It looks like a MSSQL provider issue. I don't have an MSSQL server to experiment with. Let's hope somebody with this ...
2013-12-02
-
- Hi, there are new proposed improvements in 'node tool' to select and delete nodes of current feature in more agile wa...
-
- A few weeks ago this issue (very slow creation of the SL databases) have been fixed in QGIS master, but apparently th...
-
- open the gdal translate tool, activate the "creation options" checkbox and then add an option.
As you will see this... -
- see attached image
-
- it would be very nice if in addition to the "polygon to lines" tool there would be a "polygon to edges" tool.
When m... -
- Add a geometryless table in a group. The table is given its special icon. Now uncheck and then check the group. The t...
-
- Pick the attached input files. Geometries are ok, at least qgis say so.
Now run a symmetrical difference.
If does n... -
- Take the linked sample data and run the zonal stats tool.
https://www.dropbox.com/s/jb452t5e64j6m70/zs.tar.gz
The r... -
11:54 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
- Ok. I'll be waiting.
Ciao. -
- Marcel Foelsch wrote:
> Can I do anything to make it right?
not necessary, I think I already isolated the issue.
I ... -
- Can I do anything to make it right?
-
- The log does not appear to be the one right for the attached model (the log shows GRASS modules, the model has only S...
-
- Here it is...This is a model that worked fine some updates before...
-
- Hi, can you share the model?
-
- I tried it but without success...
new log:... -
- Marcel Foelsch wrote:
> Sorry...it's my first ticket.
no problem :)
can you try put your input data in a shorter p... -
- Sorry...it's my first ticket.
log:... -
- please configure processing to leave the Window open after it runs a module so you can access directly the log and th...
-
- please configure processing to leave the Window open after it runs a module so you can access directly the log and th...
-
- please configure processing to leave the Window open after it runs a module so you can access directly the log and th...
-
- When I'm using the raster caculator without the modeler it works fine. When I'm using the saga raster calculator in m...
-
04:19 AM Bug report #7209: WCS client seems broken
- I'm getting this same error with QGIS master. With my own geoserver WCS I get
WCS provider: Cannot get test dataset... -
> How to solve this?
the tool is broke, so you may want to a) wait for the fix or b) support its fix
-
- On QGIS 2.0.1 synchronization problem remains (OS Ubuntu 12.04, Debian Wheezy).
Using qgiscloud plugin uploads a pos...
2013-12-01
-
11:09 PM Bug report #9097 (Closed): Could't run the python script, when a multi-byte letter is included in...
- Fixed in changeset commit:"f21562c86f1cdbf8181176904e382f26aafb1da9".
-
- Hi, I have tried to bring together all the comments and I have updated the pull request (https://github.com/ahuarte47...
-
- Nathan Woodrow wrote:
> Well I think you only need to catch it in node tool, everything else just ignores it.
Hi Nat... -
- Well I think you only need to catch it in node tool, everything else just ignores it.
-
- Alvaro Huarte wrote:
> Nathan Woodrow wrote:
> > Alvaro Huarte wrote:
> > > Hi, We can not use Delete for deleting a ... -
- Nathan Woodrow wrote:
> Alvaro Huarte wrote:
> > Hi, We can not use Delete for deleting a node if we use Delete for d... -
- Alvaro Huarte wrote:
> Hi, We can not use Delete for deleting a node if we use Delete for delete selected features to... -
- Hi, We can not use Delete for deleting a node if we use Delete for delete selected features too, as Giovanni said abo...
-
05:15 PM Bug report #9149 (Closed): Overlay and Soft Light blend modes do not blend with vectors
- Upon further testing it appears that I am incorrect; blend modes seem to be working as intended. I will reopen if I f...
-
- It appears I am not used to Redmine's formatting. Could someone with the appropriate privileges please correct it for...
-
- h1. Expected behavior
When overlaying a raster on top of a vector layer, the *Overlay* and *Soft Light* blend modes s... -
04:34 PM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...
- Found a work-around: if you use a varchar to store the LabelX and LabelY then QGIS behaves as expected.
-
- Steps to reproduce issue:
# Set up a layer in SQL Server with columns for LabelX and LabelY as float with NULL as de...
2013-11-30
-
12:58 PM Bug report #9145: Range Edit Widget not Selectable for Spatialite Layers.
- There is some other odd behavior I found when exploring this a bit more:
1. DB Manager recognizes the integer field ... -
- Unable to select the Range edit widget for spatialite layers. I've tried with int, small int, and real datatypes and ...
-
- Just tested qgis master 64bit installed with osgeo4w. No issues here. Maybe a plugin is the cause? can you please tr...
-
- Data Attached
Regards
Lene Fischer -
10:56 AM Feature request #9144 (Closed): add iface global to script namespace
- Also it would be good toimport qgis.core by default
-
10:38 AM Bug report #9139: Relations do not work on MSSQL layers
- Hi Matthias,
Thank you for your quick reply.
Please find bellow the capture.
[6188] ..\\..\\..\\..\\..\\src\\core\... -
- Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and...
-
- Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and...
-
- Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and...
-
- Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and...
2013-11-29
-
- Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux... -
- Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux... -
- Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux... -
- Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux... -
- Using weekly from 25.november.
Trying to make a label with expression - the program is dumped (close down)
25 studen... -
06:45 AM Bug report #9142 (Closed): "format_number" function error in label expression
- Function "format_number" in expression:
format_number(($area / 10000), 2) ||' '|| "gat"
generates bad labels. I see... -
- see subject: on linux the script editor does not have a close icon with me.
only way to close the editor window is a... -
- Can you open a form with embedded table and check the output (on a terminal. I think on windows you will have to use ...
-
- The foreign key/primary key columns have integer type.
Parent table: postgis vector layer from (id serial PKEY, ...... -
-
- What type do the foreign key / primary key columns have?
-
- I have tested relations (http://blog.vitu.ch/10112013-1201/qgis-relations) with postgis, sqlite, shapefiles and MSSQL...
-
- Hi, currently layer represents a mix between a layer style and a datasource. In my work on doing maps for geostatisti...
-
- I have no issue using Delete for deleting a node too. When you have the node tool active and a node selected then it...
-
- I do not agree with the backspace as use for removing a node. Is there a (technical) reason to make it different? Wha...
2013-11-28
-
- Customization only works for objects with objectName. objectName is automatically set by Qt for objects created in de...
-
-
- https://github.com/qgis/QGIS/pull/1014
-
- I have a strange behavior with the QgsGeometry.convertToMultiType()
method here: it looks like the method is always f... -
- Pull request updated:
* Delete selected features in map canvas: DEL key without ask for confirmation.
* Delete selec... -
- Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need... -
- Nathan Woodrow wrote:
> Backspace already deletes a node when drawing a feature. I think backspace should delete a n... -
- Backspace already deletes a node when drawing a feature. I think backspace should delete a node too.
-
- Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need... -
- Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need... -
- I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need to confirm, and in the ...
-
- Nathan Woodrow wrote:
> No not another option please. There is no need in this case. Like I, and others, have said u... -
- Similar issues (but with the area in the field calculator) have been already fixed in qgis master, and in fact I can'...
-
- Similar issues (but with the area in the field calculator) have been already fixed in qgis master, and in fact I can'...
-
-
- Huh? "provider plugins" is the plural of "provider plugin".
-
03:34 AM Bug report #9137 (Closed): Typo in text message in the code ?
- Hi,
in the source file https://github.com/qgis/QGIS/blob/master/src/app/qgisapp.cpp, line 627
The comment is "load ... -
- Rhenriques Henriques wrote:
> Sorry Giovanni, but the bug surfaced again in NB 30900e9!! It has exactly the same symp... -
- Rhenriques Henriques wrote:
> Sorry Giovanni, but the bug surfaced again in NB 30900e9!! It has exactly the same symp...
2013-11-27
-
- Sorry no luck. Even on other ports it is not working though some other software works. I think it is also connected t...
-
- Nyall Dawson wrote:
> Do you have "Don't resolve type of unrestricted columns (geometry)" ticked? (I do). Perhaps th... -
- Do you have "Don't resolve type of unrestricted columns (geometry)" ticked? (I do). Perhaps this bug is only trigger...
-
- Not reproducable here using PostgreSQL 9.3 with PostGIS 2.1. Here materialized views only disappear when 'Only look ...
-
- PostGIS materialized views are not shown in the "Add PostGIS table" dialog UNLESS "also list tables with no geometry"...
-
- Confirmed. Unset shortcuts are restored to default values.
-
- No not another option please. There is no need in this case. Like I, and others, have said undo and redo are the rea...
-
- We can propose a configurable option:
* Delete selected features in map canvas: DEL key (+).
* Delete selected featu... -
- I hate confirmation dialogs so a +1 for me to not have one. The undo is enough if something goes wrong.
-
- How about sticking to the confirmation with DEL, and add a shortcut SHIFT + DEL for no-confirmation delete? That's wh...
-
- very much agree on the proposal above.
at the moment you are being asked for removal of a feature (while you can eas... -
- Hi, we can propose to user/dev ML several shortcut changes similar to Arcmap behavior:
Arcmap 9.3:
* Delete selecte... -
02:13 PM Bug report #9060: Area is wrong in QGIS master (again)
- Sorry Giovanni, but the bug surfaced again in nightly build commit:30900e9!! It has exactly the same symptoms it had ...
-
- The browser pane currently ignores any Postgis materialized views. These should be shown in the browser alongside oth...
-
- It is not possible to customize single entries of the menu bar. For example trying to remove "geoprocessing" and "geo...
-
- Jonathan Moules wrote:
> Excellent response time. Why can't ESRI be like that? ;-) Thanks.
No "E$RI":http://richardb... -
- Jonathan Moules wrote:
> Why can't ESRI be like that?
Essential Service Request Ignored
this is how they are known... -
- Excellent response time. Why can't ESRI be like that? ;-) Thanks.
-
- Fixed in changeset commit:"30900e9b8960b1dbe13d08e903d17f77b3ef7bca".
-
- 1) Open WMS/WMTS dialog
2) Enter: "wmts - wppgeog3/geoserver" as the name; any url
When it saves it will save the na... -
- Yes, but you can't expect users to do that. Most don't understand OGC service URL's. If the servers were actually com...
-
- Use @http://wppgeog3/geoserver/gwc/service/wmts?SERVICE=WMTS@, if you want WMTS.
-
- Use @http://wppgeog3/geoserver/gwc/service/wmts?SERVICE=WMTS@, if you want WMTS.
-
- In fact, looking at the spec further, it seems the server should be returning a 400 error to that request. (InvalidPa...
-
- I've set my WMTS to use:
http://wppgeog3/geoserver/gwc/service/wmts
When I click "connect" it makes the following r... -
- maybe helpful?
http://stackoverflow.com/questions/81627/how-can-i-hide-delete-the-help-button-on-the-title-bar-of-a-... -
- to help non windows users to understand the 'problem'.
see screenshot: as you can see there is both a help-button on... -
- When doing a join and then saving the resulting layer/table with the "save as..." option, the joined column names are...
-
- Alternative for moving to core:
We could add the possibility to expose a python API from C++ plugins as well. I could...
2013-11-26
-
12:29 AM Bug report #9128 (Closed): wrong perimeter value in the identify feature tool
- trying to calculate area and perimeter from a simple shapefile with CRS WGS84UTM32 following these steps:
1) set up t... -
- More opinions:
https://github.com/ahuarte47/QGIS/commit/9f1395ea04cc0498535ac28d6779609be752c842#commitcomment-4713567 -
- Giovanni Manghi wrote:
> > I wonder if 'delete a feature' should use "del" key and 'remove a node' user other key (e.... -
> But please call me wrong :)
you can have a feature selected, as well as a node, at the same time, even of differe...-
- I'm not that deep into QGIS, but aren't both with an internal state?
* If feature is selected, delete it
* If a node ... -
> I wonder if 'delete a feature' should use "del" key and 'remove a node' user other key (e.g. Ctrl+Del).
> But it c...-
- Giovanni Manghi wrote:
> are we sure that this will not clash with the "del" action used by the node tool to delete s... -
- are we sure that this will not clash with the "del" action used by the node tool to delete selected nodes? :)
-
- Postgres 9.3 added support for materialized views. These are currently ignored by dbmanager and not shown in the tree...
-
- It's actually not quite that simple - the maximum value is not known until the entire heatmap is generated, it can't ...
-
-
- Problem finally solved in QGIS nightly build commit:55f8606!
Cheers -
- Currently tools that are related to the layer widget are only within the context menu of layers. This is bad, as
* th... -
- That's fixed it.
And wow, this is awesome. Compare it to the ArcGIS WMTS implementation which is utterly awful and to... -
- 1) Installed "last" weeks weekly build (in my case QGIS-OSGeo4W-2.1.0-46-Setup-x86_64.exe )
2) Uninstall manually fr... -
- Jeremy Palmer wrote:
> I've just seen this pull request. Dumb question, but why would you implement the user defined ... -
- I've just seen this pull request. Dumb question, but why would you implement the user defined
simplification setting... -
- Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr... -
- Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr... -
- Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr...
2013-11-25
-
11:20 PM Feature request #9124 (Rejected): Heatmap in percentage
- Heatmaps would be far more convenient (easier to interpret in many contexts) if they could (optionally) be expressed ...
-
11:01 PM Bug report #9097: Could't run the python script, when a multi-byte letter is included in file name
- The patch should be:...
-
05:33 PM Bug report #9122 (Closed): DXF of Italian Cadastral Map not load
- Support for such files added as http://trac.osgeo.org/gdal/ticket/5307
-
- Support for such files added as http://trac.osgeo.org/gdal/ticket/5307
-
04:37 PM Bug report #9122 (Closed): DXF of Italian Cadastral Map not load
- Qgis and ogr doesn't load the files DXF of italian cadastral system, it give a error as file malformed. (error is: ...
-
- I propose this pull request:
https://github.com/qgis/QGIS/pull/1010
-
01:36 PM Bug report #8920: DB Manager Fails to Load Raster | QGIS 2.0.1
- This bug is present in 2.1.0-Master (Debian Jessie amd64, Nightly build), and postgreSQL 9.3
Patch suggested by Max c... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"32b05836d50b36f443517ef6a76ac26d49b19b89".
Hi Jürgen, I seen your... -
- Thank you both very much for fixing :)
-
- Fixed in changeset commit:"32b05836d50b36f443517ef6a76ac26d49b19b89".
-
- Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards -
- Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards -
- Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards -
- Hi Jonathan, looking into the fix of jurgen, it seems there is was a missing default style.
So I thought to check th... -
- Thanks! I guess that'll be in tonight's weekly build?
-
- Fixed in changeset commit:"c321f597fd814f963cc55ec3edfbe708fcf37a45".
-
- You can test with - http://maps.warwickshire.gov.uk/gs/gwc/service/wmts?REQUEST=GetCapabilities
-
- Would this be in the build weekly QGIS-OSGeo4W-2.1.0-46-Setup-x86_64.exe - 18-Nov-2013 20:22 - number e882e47 from - ...
-
- Thank you for the quick fix Marco.
It seems this can be closed.
Out of curiosity, is there a reason to have it open ... -
06:01 AM Bug report #9119: srs.db not closed (with OTF reprojection)
- it works :)
19 opened at the open of qgis
37 after opened my project... after a while down to 25
zoom... remain 25 a... -
- There was a missing delete / db close. However, it does not explain why the number of open db grows with every zoom.
... -
-
- I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day...
-
- I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day...
-
- I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day...
-
- I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day...
-
- no... it's not my fault!
on fly repropjection open 12 /tmp/srs.db EVERY zoom or canvas redraw!
I don't know if it's... -
- hmmm... seems is related to my opened db by my new plugin
it's full of: /tmp/srs.db
generating 20 more every zoom!... -
- Can you run the following command when this happens next time, replacing [qgis-pid] with the actual pid
@ls -l /proc... -
- Hi,
I have this erros during short time setting style o a spatialite layer. I don't know if this happend with other ... -
03:40 AM Bug report #9110: Empty SAGA help
- Yes Alexander, now i see one thing.
I use the #8259 to get html help and put in my folder of description inside of s... -
- https://bugs.launchpad.net/ubuntu/+source/qtcreator/+bug/959722
it's a bug in qt-at-spi
@sudo apt-get remove qt-at-... -
- https://bugs.launchpad.net/ubuntu/+source/qtcreator/+bug/959722
it's a bug in qt-at-spi
@sudo apt-get remove qt-at-...
2013-11-24
-
- If I'm not wrong, we never have complete documentation. Also we decided to move all documentation outside Processing,...
-
- Fixed in changeset commit:"c1d2798f47b7788f8b81eaf4b9f8707487f5919f".
-
- This issue seems to be fixed.
-
11:23 AM Bug report #9118: Crash when using arrow key
- Error message:
_Warning: QSpiAccessible::accessibleEvent not handled: "8008" obj: QSidebar(0x6755c80, name = "sid... -
- I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho... -
- I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho... -
- I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho... -
- When I create a map and like to save it as an image I can type in a file name and get suggestions from already existi...
-
- While QgsRenderChecker allows for anomaly images, there's no similar feature in QgsCompositionChecker. Currently ther...
-
- Nyall Dawson wrote:
> Fixed in changeset commit:"f01206565847655d1caee64d342d999988c66491".
Hi Nyall,
I just tested... -
- Nyall Dawson wrote:
> Fixed in changeset commit:"f01206565847655d1caee64d342d999988c66491".
Hi Nyall,
I just tested...
2013-11-23
-
01:23 PM Bug report #9116 (Closed): Compile error: cannot find -lqgis_app
- The QGIS compile for qgis-server use
give an error.
I'm using the today master trunk version
[ 99%] Built target qgi... -
- One thing do you have the folder description inside of saga folder with html help?
Another thing that i can do is se... -
- Hum, on Linux "Reload" doesn't work with the Help of Pattern Analysis
-
- Hi Veronika,
if you have questions/doubts the right place is the users/developers mailing list, the qgis irc channel... -
- Hi Veronika,
if you have questions/doubts the right place is the users/developers mailing list, the qgis irc channel... -
- In other renderers, it is possible to us color functions such as color_rgb( 100,255,255) to change the fill and outli...
2013-11-22
-
- Nyall Dawson wrote:
> Alvaro Huarte wrote:
>
> > Hi Nyall, I did not know this discussion!, I have involved in QGIS ... -
- Alvaro Huarte wrote:
> Hi Nyall, I did not know this discussion!, I have involved in QGIS later. Coincidences of lif... -
- Nyall Dawson wrote:
> Alvaro - these improvements look fantastic! Your hard work is much appreciated!
>
> One relate... -
- Basically yes. But IMHO we need to focus esp. beginners to GIS that just want to work with data. The consequence woul...
-
11:06 AM Feature request #9098: Offer a global OSM TMS as default map services
- Have you tried the openlayers plugin? Are you looking for something similar?
-
- I confirm the help is incomplete. Another thing. After the fix if the help stay blank do right click and reload this ...
-
- I applied your fix but it didn't work. It may be possible that I tested algorithms with no help. Which ones did you t...
-
- There's also no help on Linux (I thought there wasn't any).
-
- There's also no help on Linux (I thought there wasn't any).
-
-
- I agree this would be an useful feature, and also in combination with a WYSIWYG editor would make a powerful combo if...
-
- May I suggest also to add the possibility to choose the anchor point
-
- I have been using the quick finder plugin for this, but this should be a core function of QGIS, hope this is added in...
-
- I think its more natural as user experience for you to look the alphabetical order of the first item of the list, in ...
-
- I think F5 as default is better since most users would expect that either from other software or from browser refresh...
-
- I see no issues setting it as default.
-
- I agree that you can alter the shortcut on your own, but my request is esp. on (useful) defaults.
As always it's har... -
- Hi,
I believe that you can set it by yourself through Settings - Edit shortcuts. By the way, I just learned from you... -
- I agree, I have been using QGIS for some time and didn't know you could just configure the shortcut to do that. By de...
-
08:37 AM Bug report #9113: Print converter: Map layer is not included when saved as image
- Oh or if the map appears, it almost alway has a different zoom, so the map and the layers don´t fit together. That is...
-
- Hello!
I have following Problem (not sure if it's a bug or I just messed it up, though).
I am trying to save part of... -
- Open the layers in the attached SL db (you may want to use the attached project), then activate OTFR and try edit one...
-
> On the other hand on Linux it crashes (but may not be related).
On Linux qgis master crashes, qgis 2.0 does not ...-
- ok great, thanks for looking into that!
-
- Brian Freed wrote:
> I just reinstalled, but it's reporting the same version.
>
> I'm using the osgeo4w-setup-x86_64... -
- Brian Freed wrote:
> I just reinstalled, but it's reporting the same version.
>
> I'm using the osgeo4w-setup-x86_64... -
- I just reinstalled, but it's reporting the same version.
I'm using the osgeo4w-setup-x86_64.exe installer. The inst... -
- Matthias Kuhn wrote:
> There have been a couple of recent updates in this area. Could you already check if this fixes... -
05:55 AM Bug report #6476: data defined ellipse symbols on polygon centroid fill
- Works for me too now! And I could even fill the ellipse colour using a text field containing values like #54f7b8.
I'... -
02:18 AM Bug report #9088: Text Annotation Symbols size is wrong in map composer
- Hello Giovanni
I downloaded Master on 21 November.
The text annotation symbol problem is the same as that on stable v... -
- Why not to make InfoFormat selectable in the WMS server settings? As Mapserver administrator I know it is very hard t...
-
- Surag Kulkarni wrote:
> Hi
> Sorry for not adding the screenshots and more details.
> QGIS 2.0.1 output using atlas g... -
- Surag Kulkarni wrote:
> Hi
> Sorry for not adding the screenshots and more details.
> QGIS 2.0.1 output using atlas g... -
- closing for lack of feedback.
-
- closing for lack of feedback.
2013-11-21
-
- Nyall Dawson wrote:
> Here's some more string updates for this latest addition:
>
> "By default simplify geometries"... -
- Alvaro - these improvements look fantastic! Your hard work is much appreciated!
One related idea I was planning on i... -
- Here's some more string updates for this latest addition:
"By default simplify geometries" -> "Simplify geometries b... -
- Hi,
I release a new windows installer which contains:
* Patch #8725 of QGIS (https://github.com/qgis/QGIS/pull/980... -
- regis Haubourg wrote:
> Hi Alvaro, I tested your windows package, this is huge! Many thanks...
> As a GIS administra... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > > Anyone else noticed something similar?
> >
> > can you try remov... -
- Giovanni Manghi wrote:
> > Anyone else noticed something similar?
>
> can you try remove the layers (one by one) fro... -
> Anyone else noticed something similar?
can you try remove the layers (one by one) from your project and see if yo...-
- rph - wrote:
> Hi, I've tested this on Win7 64 bit with a previous project containing several raster and vector layer... -
- May be related to the old Qt version shipped on windows 32 bit.
-
- There have been a couple of recent updates in this area. Could you already check if this fixes the problems?
-
- just saw your post #11 - we must have passed each other. Yeah, I'll go ahead and update - probably tomorrow
-
- ah, gotcha. I was afraid I'd done something stupid. Thanks
-
- Brian Freed wrote:
> I'm trying to set the project to a non-user projection now, but I'm getting a bunch of dialogs l... -
- I'm trying to set the project to a non-user projection now, but I'm getting a bunch of dialogs like 'Select datum tra...
-
- Brian Freed wrote:
> my files were created with qgis-dev - version commit:e882e47, from 11/18. That's the same thing ... -
- Brian Freed wrote:
> If you start a fresh QGIS session and just load in all the layers, does it still crash?
> (tryin... -
- If you start a fresh QGIS session and just load in all the layers, does it still crash?
(trying to figure out if it's... -
- my files were created with qgis-dev - version commit:e882e47, from 11/18. That's the same thing as Master, right? (ot...
-
- Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible.... -
- Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible.... -
- Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible.... -
- footnote:
I was back on the same site all day yesterday & this morning, and can confirm that file performance degrade... -
- Sorry for the delay, I couldn't send the client's files.
But I finally got it reproducible. See attached. I number... -
- Sorry for the delay, I couldn't send the client's files.
But I finally got it reproducible. See attached. I number... -
- you need to
@from PyQt4.QtCore import QFileInfo@
or just import all the important PyQt stuff
@from PyQt4.QtCore im... -
- Is this still an issue for somebody?
-
- This works with QGIS 2.0 (And there is no more data type QVariant in PyQT...) And as it seems, it's easy to work arou...
-
- This issue has been reported against a development version and not seen any updates for several months, so I assume i...
-
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- When you say "transparency" are you referring to the one of the coverage layer? if yes, it is working ok here.
I can... -
- When you say "transparency" are you referring to the one of the coverage layer? if yes, it is working ok here.
I can... -
- I find the bug. :)
In the folder .qgis2/python/plugins/processing/saga on the SagaAlgorithm.py in line 508 substitu... -
- *Win 7 64-bit / OSGeo Installer 32-bit
Plugin Processing Version: 2.0-20131120*
_QGIS version 2.0.1-Dufour QGIS code... -
- Yes i agree. My first idea was create a automatic workflow starting with vector contour lines > interpolation > NVIZ....
-
- When adding nviz in a model the following pyhton error shows.
Probably it would be better to remove nviz from the mo... -
- When i say small is simple: 1 raster (elevation) and 1 raster (color) and the algorithm NVIZ
Yes but only with the i... -
- can you share the model?
-
- Hi there,
I test a small model using NVIZ as my final algorithm. When try to use the NVIZ in model of the modeler g... -
- in qgis master when I add (example) a csv as a table, the datum transformation dialog shows (I guess it should not).
-
- It seems that if there are NULL values in the raster a mask representing those values (transparent) is written to PDF...
-
- Thanks, Matthias! Making composition a class variable solves this issue.
-
- Alex, did you try to assign the composition to a class variable instead of a local variable so it does not get garbag...
-
- I also see this issue with the standard N x T distance matrix.
The linear distance matrix seems to works ok.
The su... -
-
- Closed due to lack of feedback.
Please reopen if required and add any data/info that may have been requested. -
- Closed due to lack of feedback.
Please reopen and provide requested details if this problem is still an issue. -
- hagit Wiener wrote:
> I'm having the same problem.
> Downloaded the latest version of Qgis earlier this month. What i... -
01:22 AM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files
- I'm having the same problem.
Downloaded the latest version of Qgis earlier this month. What is the OGR? -
- Closing due to lack of feedback.
Please reopen (with added details) if this still is an issue. -
- Works for me on a recent master build. Is this issue solved or am I testing the wrong thing?
2013-11-20
-
07:11 PM Bug report #9106 (Closed): There is no equivalent to setGrayBand for QgsSingleBandPseudoColorRend...
- I have been struggling with multiband rasters for some time. I wish to iterate through the multiband raster that I h...
-
04:30 PM Feature request #8725: Speed improvement in the render of geometries for qgis
- Hi, I've tested this on Win7 64 bit with a previous project containing several raster and vector layers. Surprinsingl...
-
- Nyall Dawson wrote:
> Can I suggest some improvements in the strings?
>
> "Fast drawing" -> "Simplify geometry"
>
>... -
- Can I suggest some improvements in the strings?
"Fast drawing" -> "Simplify geometry"
"Note ..." -> "Note: Enabling... -
- Yeah really good. Describes perfectly the situation. =)
Regards -
- Alvaro Huarte wrote:
>
> Hi João,
> I added a warning label that appears when the user increases the simplification ... -
- regis Haubourg wrote:
> Hi Alvaro, I tested your windows package, this is huge! Many thanks...
> As a GIS administra... -
- Alvaro Huarte wrote:
> João Gaspar wrote:
> > My feedback:
> >
> > *OS: Windows 7 64-bits
> > Processor: Intel(R) Co... -
- Hi Alvaro, I tested your windows package, this is huge! Many thanks...
As a GIS administrator, I would need a genera... -
-
- Hi, QGIS 2.0 introduces a new OSM tool that allows to get the corresponding area of a layer directly from OSM and sto...
-
- Fixed in changeset commit:"584aba7672e1c000a031de750713cd9a8e58ca8d".
-
- confirmed here, does not happen if the csv is imported as point layer.
-
- Using the "stops.csv" file from this zip - http://www.dft.gov.uk/NaPTAN/snapshot/NaPTANcsv.zip
1) Drag file into QGI... -
10:33 AM Feature request #7878: Windows 8 Location Provider GPS Support
- Miroslav try use higher COM port (4 or 5). Many users of Centrafuse Localizer have a problem on some navigation syste...
-
- *New description:*
N x T distance matrix is created without errors in Processing but output is wrong, see attached f... -
- Have downloaded the 2.1 weekly and "standard" is still broken, though in a slightly different way. "Linear" is also s...
-
- Alexander Bruy wrote:
> Go to "Projects" page and you will see all available trackers. If you post bug in wrong track... -
- Jonathan Moules wrote:
> b) How many trackers are there for all of the components of QGIS? How is a user supposed to ... -
- This is the Processing's bug tracker. I believe the idea is to clean the current Processing bugtracker and then merge...
-
- Alexander Bruy wrote:
> Works in master.
>
> Please, don't post Processing issues in QGIS tracker!
a) There is a "P... -
- Works in master.
Please, don't post Processing issues in QGIS tracker! -
- Works in master.
Please, don't post Processing issues in QGIS tracker! -
- Due to proxy issues I can't access the plugin installer. Sorry.
-
- Can you also test with a more recent code revision? It's available via the Plugin Installer.
-
- 1) Add the attached "points" shapefile.
2) Use the Processing toolbox Distance Matrix - configure as attached screens... -
07:13 AM Bug report #9101 (Closed): Raster artefact in composer pdf export
- When exporting composer with raster image to pdf it leaves an artefact around the edge of the image.
See attached ra... -
- If you add the CSV as table, then is editable, if you add it as a point layer then it is not. I believe that is a ogr...
-
-
- Hello everyone,
It seems the R has a package R2HTML that convert the R objects to HTML.
http://cran.r-project.org/w... -
- IMHO it should be set by default. Think on yourself from an enduser POV, how often do you alter the shortcuts of an a...
-
- it can be configured in "configure shortcuts" panel, but anyway I guess that it could be configured by default.
-
- I'll tag this a regression, meanwhile can you test QGIS master and see if by any chance this has been fixed there? th...
-
- I'll tag this a regression, meanwhile can you test QGIS master and see if by any chance this has been fixed there? th...
-
- More and more novice users join GIS even due to open data (encouraged citizens...datajournalists) and QGIS is one of ...
-
01:29 AM Bug report #9097 (Closed): Could't run the python script, when a multi-byte letter is included in...
- When run the python script which multi-byte letter is contained file name from python console editor, I/O error occur...
2013-11-19
-
- HI
Previously I have used the same QGIS project for V1.8 with Atlas plugin. The maps were created well and very satis... -
04:55 PM Bug report #9095 (Closed): Shape file points not appearing in 2.0.1
- Well I accidentally found the solution to my problem. I found that there was a point in the attribute table that had ...
-
- I have a shape file that is a point layer which has been working fine and displaying fine in 1.8. When I open the lay...
-
01:56 PM Bug report #9089: Data-defined symbol color very slow in 2.0 release
- Sorry, I've found that was a Qt 4.7 bug : ...
-
- tagging as regression.
-
- tagging as regression.
-
- Hi,
Data-defined symbol color is very slow on 2.0 release cause a lot of Qt warnings appears :
@QColor::setNamedC... -
- I confirm this issue on 12.04. QGIS always launches on the second window of the workspace. The user has to open the w...
-
- Currently QGIS 2.0 shows the main window every time on a different window at startup. That causes strange effects as ...
-
- Hello
Text annotation symbols worked fine with QGIS 1.8.
Size of symbol on map canvas was the same on map composer.
T... -
- do you have any evidence if this was working the right way in qgis 1.8?
-
- do you have any evidence if this was working the right way in qgis 1.8?
-
- I am able to add text annotaion to map canvas without any problem.
Problem arises when going to map composer.
Text an... -
- João Gaspar wrote:
> Ahaha. ;)
>
> In the minimum level don't appear gaps is "clean and smooth". ;)
>
> Only appear... -
- Ahaha. ;)
In the minimum level don't appear gaps is "clean and smooth". ;)
Only appears when i increase the slider ... -
- João Gaspar wrote:
> Sorry my English sometimes tricks me. :p
>
> I don't understand what you want to say with "not ... -
- Sorry my English sometimes tricks me. :p
I don't understand what you want to say with "not appear in the scroll at l... -
- João Gaspar wrote:
> My feedback:
>
> *OS: Windows 7 64-bits
> Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz ... -
- Yes, it just works with positive values :)
-
- > Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right? -
- > Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right? -
- > Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right? -
- Calculating mean coordinates require negative weigths per definition.
The QGIS 2.0 feature sadly doesn't check nor no... -
- Most users would expect that Del key will erase the current selected feature, if you are in edit mode. Please fullfil...
-
- Hi, even if I worked with .CSV files already in QGIS 2.0 I now somehow managed to get my instance not allowing to go ...
-
- Here is an example of what works for me both in 2.0.1 and current master:...
-
- 'msGMLOutput' is OK. I don't see anything wrong in the response.
Current master can display parsing error with possi... -
- Radim, as you worked on this matters recently, can you add a comment? this should be fixed in master, right?
Landry,... -
- Radim, as you worked on this matters recently, can you add a comment? this should be fixed in master, right?
Landry,... -
- Tried on OpenBSD and Windows 7, with QGIS 2.0.1. (1.8.0 works fine but queries INFO_FORMAT=text/plain)
If i query a ... -
- Even worse then
-
- are you sure, it's related to Atals use case?
I have labels truncated also in static printing and main Mapcanvas.
-
- Jürgen Fischer wrote:
> apparently master is not affected, but it's reproducable on 2.0.1
then closing as usual in t... -
- Jürgen Fischer wrote:
> apparently master is not affected, but it's reproducable on 2.0.1
then closing as usual in t... -
- apparently master is not affected, but it's reproducable on 2.0.1
-
- The button needs to follow the same states as the button at the attribute table (consistency).
Enabling edit-mode c... -
- What do you suggest?
Personally, I think it would be nice if clicking on the toolbar's Field Calculator activated th... -
- The Field calculator button in toolbar is disabled when switching in editmode of a vector layer. You need to go Attri...
-
- Currently the Layer menu includes a lot of stuff, so on medium size displays as laptops the menu gets scrollbars (see...
-
- Duplicates #2798
-
- Duplicates #2798
-
- If you resize the log window (because you might want to see if there occurs something strange), QGIS will try to do a...
-
- Alexander Bruy wrote:
> Seems the only possible way to get broken attributes is using "System" encoding when saving ... -
- Currently the calculator asks the user to fill in the expected result. As this is on the very top and the user might ...
-
- Most tools use F5 key to refesh it's screen/data. It would be nice, if also QGIS would follow this standard, as this ...
-
- In #9072 I refer to some problems in UI design. As the team wished more specific suggestions, I like to discuss on ho...
-
- When using the raster calculator with this simple example:
@layer1 / 10
the results do not come out as expected. W... -
01:56 AM Bug report #9070: +towgs84 wrongly ignored when OTF reprojection is on and project CRS is WGS84 P...
- Marco, thanks, glad this was uncovered and fixed early on :)
-
- Given that master now has the global option "Max retry in case of tile request errors", can this issue be closed now?
-
- Fix has been in master for some time -- I'm not sure why this didn't auto-close.
-
- Fix has been in master for some time -- I'm not sure why this didn't auto-close.
-
- Duplicate of #4884 - a fix is in progress.
-
- Duplicate of #4884 - a fix is in progress.
-
- Paste in Place has been in master for some time now - I think it's safe to close this request.
-
- Paste in Place has been in master for some time now - I think it's safe to close this request.
2013-11-18
-
- here is what I see:
Version de QGIS 2.0.1-Dufour Révision du code ebebdf3
Compilé avec Qt 4.7.1 Utilisant Qt 4.7.1
... -
- Can you paste a image of your about QGIS dialog.
-
- Ok, didn't know that. Anyway, it seems nathan's code is not functionnal in 32 bit package. Maybe other reasons explai...
-
- regis Haubourg wrote:
> In my 32 bit osgeo4w installer, I get 2.1.0-55 where I get -60 in 64 bits version.
Right, bu... -
- In my 32 bit osgeo4w installer, I get 2.1.0-55 where I get -60 in 64 bits version.
-
- regis Haubourg wrote:
> Hum, in fact 32 bit package is realy old, 64 bit is up to 2.1.0-60
What do you mean? The p... -
- Hum, in fact 32 bit package is realy old, 64 bit is up to 2.1.0-60
-
- Yep, updated osgeo4w 64 bit today. Will check 32 bit now...
-
- Very old. Are you using the OSGeo4W of the qgis site?
-
- Hi Nathan,
I can't see $currentfeature variable in latest revision on OSGEO4W (5f5cd4c) , with Atlas enabled..
Any ... -
- Another solution is here! in qgis.bat ("qgis.bat.tmpl":https://github.com/qgis/QGIS/blob/master/ms-windows/osgeo4w/qg...
-
- This problem was fixed once in 1.9 (commit:8970a1f), but it was affected by commit:c9eb4f2 I made to fix an issue #80...
-
11:25 AM Bug report #9079 (Closed): Numeric scale error when print
- Hello,
There is an error in the numeric scale in the map composer. For example, if we print with a scale of 1:20 000... -
- Labels for items other that the current (focused) one can be truncated in the output.
I assume this means Atlas gener... -
- My feedback:
*OS: Windows 7 64-bits
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz 2.4GHz
RAM: 4.00Gb*
*QGIS ... -
- Fixed in changeset commit:"51006cea1f2959b0e659a8ee07577632dc3c2753".
2013-11-17
-
- Alvaro Huarte wrote:
> This up guys! :-)
>
> My proposed pull request (http://trac.osgeo.org/gdal/ticket/5272#commen... -
- This up guys! :-)
My proposed pull request (http://trac.osgeo.org/gdal/ticket/5272#comment:7) in GDAL-OGR library fo... -
12:29 AM Bug report #9076 (Closed): Properties of a group of composer items cannot be edited
- When creating a group of composer items, it is not possible to edit its ID with the composer UI.
That could be useful... -
- I think more work has to be done on the Processing side, to add these options to the export command.
-
- Paolo Cavallini wrote:
> From Markus Metz, GRASS mailing list:
> ===
> An alternative would be to make use of the GDA... -
- Would be great. I tried today trial of third party software (Centrafuse Localizer) with QGIS 2.0.1, which supposed to...
-
- Fixed in changeset commit:"99cee10cf96314ae911a6d8b99d6a43015a3cf83".
-
- duplicate of #9011
-
- duplicate of #9011
-
- @2013-11-16 13:55:03 MST WARNING: ST_Estimated_Extent signature was deprecated in 2.1.0. Please use ST_EstimatedExte...
-
> I would suggest also remove the "-a" parameter (Calculate distances to all features within the threshold), from v....-
- Victor Olaya wrote:
> it works here (the algorithm executes), although the results are empty... One of the things thi... -
- Markus Neteler - wrote:
> Perhaps 6.4.3 will address that: http://trac.osgeo.org/grass/log/grass/branches/releasebran...
2013-11-16
-
- iacopo zetti wrote:
> What I have to do in this situation; I have to share project and data or not?
no, just do it... -
- iacopo zetti wrote:
> What I have to do in this situation; I have to share project and data or not?
no, just do it... -
12:57 PM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
- I opened again today two of the project that caused the problem and now (after a new upgrade) no problem. Apparently ...
-
- Marco,
I *think* the indian 1960 48n layer is the one being misplaced/misprojected, based on fact that if you load t... -
- Maybe a problem with the null grid parameter that is removed now. Looking into that problem on Monday.
Do know which ... -
- noone noone wrote:
> I see, but as IMHO the most users lack also of time to track mailinglist discussions (they have ... -
- I see, but as IMHO the most users lack also of time to track mailinglist discussions (they have also to work and crea...
-
- That we don't care about the usablity is simply wrong. There have been countless UI improvements over the years. We...
-
- That we don't care about the usablity is simply wrong. There have been countless UI improvements over the years. We...
-
- Antonio Locandro wrote:
> invest
that is the key word. Invest in QGIS and good thing happens. Don't invest, then yo... -
- Maybe the tone is not there, but the spirit is. At some point some time should be invested to improve UI/UX. For exam...
-
- I'm sorry if I missed the tone. Maybe this is due because I really expected more things to be done on UX on a major u...
-
- I don't really like that this ticket creates a tone that we don't care about usability. We are always happen to impr...
-
- Even if QGIS 2.0 should addressed usability corresponding to the roadmap, the current user experience seems to be bad...
-
12:38 PM Bug report #9050: Cannot add a scalebar in meters of project is wgs84
- Hello All,
maybe we could put together this issue and what I suggest in #9050 and also in PR https://github.com/qgis... -
- noone noone wrote:
> If you do that please explain people what you expect them todo. Maybe ad"ing an grayed out expla... -
- Related #8893 which is about more prominent warnings for expression errors. This should be the way to go.
-
- @Nathan yes Layer -Filter
@Jürgen If you do that please explain people what you expect them todo. Maybe adding an gr... -
- That's usual SQL syntax. IMHO we should stick to that.
-
- Are you talking about Layer -> Filter.. or the expression you use for labels, actions, attribute table?
-
- Are you talking about Layer -> Filter.. or the expression you use for labels, actions, attribute table?
-
- When you define a filter and add a field it's inserted with encapsulated as "fieldname". This causes the user to thin...
-
- When I select the measure tool, specially in GCS the default option is degrees and it tells me (OTF off). What I woul...
-
- when I do a customization in qgis to a layer toolbar changes only take place after restarting, it this the desired be...
-
- Wouldn't it be practical to use Vincenty's Formula for this?
-
- In other COTS software it is kept in memory during the lifetime of the open project. Lets say I created an expression...
-
- I would find this very useful! In my area of work we need NM support, even for measuring distances and input of dista...
-
06:29 AM Feature request #8725: Speed improvement in the render of geometries for qgis
- Yes, I did use your latest version of QGIS. The drawing sped of QGIS with the postgis dataprovider is now compareable...
-
- Bo Victor Thomsen wrote:
> Hi Alvaro -
>
> I just tried your new version of QGIS on my Postgis-based dataset (1.3 mi... -
- Hi Alvaro -
I just tried your new version of QGIS on my Postgis-based dataset (1.3 million buildings, i.e simple pol... -
- It works fine here, tested on both linux and windows.
-
- It works fine here, tested on both linux and windows.
-
- It works fine here, tested on both linux and windows.
-
- It works fine here, tested on both linux and windows.
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
2013-11-15
-
- Issue seems to have appeared following the (cool) datum transformation commits. Steps to reproduce:
1. Create a new p... -
- The debian-nightly ppa had an update to its qgis master build with which I can't reproduce crash anymore. Looking int...
-
- The debian-nightly ppa had an update to its qgis master build with which I can't reproduce crash anymore. Looking int...
-
- this is weird, now I cannot replicate the issue anymore.
-
- Giovanni, disabling all plugins doesn't bring me much luck over here, still crashing.
-
- The mentioned changeset actually fixes #8793, not this one.
-
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > Hi Alvaro
> >
> > with the new installer QGIS crashes when startin... -
- Giovanni Manghi wrote:
> Hi Alvaro
>
> with the new installer QGIS crashes when starting.
>
> Cheers!
>
>
> Alvar... -
- Hi Alvaro
with the new installer QGIS crashes when starting.
Cheers!
Alvaro Huarte wrote:
> Giovanni Manghi wrote... -
03:36 PM Bug report #9069 (Closed): Add PostGIS Table(s) Set Filter non-functional
- Applies to v2.x.x including most recent weekly build, worked previously in v1.8+
When attempting to filter data whil... -
- See attached project and files. See the two PNG images included. One shows how the area is predicted in the calculati...
-
- I just checked and could not reproduce (yet).
OTF turned on:
With project CRS set to 4326 I get 2523339 in the ident... -
- this looks like it is not crashing the QGIS Plugin Builder
but it is crashing a plugin (onetime) that is created wit... -
- this looks like it is not crashing the QGIS Plugin Builder
but it is crashing a plugin (onetime) that is created wit... -
- fixed in commit:836e1a8
-
- fixed in commit:836e1a8
-
- probably related or duplicate of #8401
-
- This wmts service:
http://geodata.nationaalgeoregister.nl/tiles/service/wmts/brtachtergrondkaart
when loading the l... -
- Jürgen Fischer wrote:
> fixed in commit:836e1a8
Um, might actually be something different. That fixes the problems ... -
- fixed in commit:836e1a8
-
- fixed in commit:836e1a8
-
- #9066 has a public url to test
-
08:09 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
- Found the same problem (QGIS 2.1 on WinXP 64): WMTS provided by default Mapcache 'demo' page works on QGIS 1.8 and 2....
-
- This is made on purpose, to avoid putting all the fields in queries between ''.
This is also the shp2pgsl choice. Too... -
- This is made on purpose, to avoid putting all the fields in queries between ''.
This is also the shp2pgsl choice. Too... -
- When importing a shape in Postgis by DBManager, the names of fields are switched to lower case.
It would be better l... -
- iacopo zetti wrote:
> I have done the test: yes it happens with two different computers (Ubuntu 13.04 and debian whee... -
- Fixed in changeset commit:"c0b8e9abdf17c16a18235983688eee6104ce744e".
-
- Hi Matthias,
just compiled commit:2f9eba1, still very slow.
thanks for looking into this!
cheers! -
- Hi Matthias,
just compiled commit:2f9eba1, still very slow.
thanks for looking into this!
cheers! -
-
- This has been fixed in commit:9259e27
-
04:43 AM Bug report #8793: Crash while Exporting OpenStreetMap Topology to SpatiaLite
- With Niedersachsen-latest it doesn't work. Could yout test it with it?
-
- I've made PR https://github.com/qgis/QGIS/pull/995/files to make scalebars more rational (under my point of view) and...
-
- it is already integrated.
you should be able to use it right away. -
03:03 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
- Yes, if it is easily integrated into the "Create new feature" dialog. All i wanted to do is to digitalize per hand so...
-
- Fixed in changeset commit:"eaf90e6a40ff49913f2920c9bfd4106e0893883b".
-
- Most probably the crash is due to the fact that the form is referring to a field that has been deleted from the shape...
2013-11-14
-
- ...
-
- Clicking with the Info tool on the layer attached, with its own style (a form has been defined there) causes a system...
-
- Martin, would you be satisifed by using unique values with editable checked?
-
- Martin, would you be satisifed by using unique values with editable checked?
-
- at the end, this would be equivalent to have _*unique values*_ with _*editable*_ checked.
So it's rather a problem o... -
- value map is for unique value, isn't it?
Here, it would just be a helper with already used values.
It could maybe be... -
- We use the value map widget for this, but a simpler way would be good.
-
- What about setting an auto completer for line edits with unique values from the layer (not from the previous entries)?
-
- Giovanni Manghi wrote:
> > therefore, other improvement for render vector layers!
>
>
> very good news!
>
> any c... -
- Giovanni Manghi wrote:
> > therefore, other improvement for render vector layers!
>
>
> very good news!
>
> any c... -
- I have done the test: yes it happens with two different computers (Ubuntu 13.04 and debian wheezy). Yes it happens al...
-
- It could be related to debug messages being printed in master (which is probably compiled with CMAKE_BUILD_TYPE=Debug...
-
07:40 AM Bug report #8506 (Reopened): In the Label Section- option Type case - Capitalize first letter don...
- This was closed prematurely, it does not work as advertised. The problem is that the function assumes the input is al...
-
05:44 AM Bug report #9063 (Closed): QGIS Plugin Builder crash since the second time it start
- This is the error:
Couldn't load plugin onetime due an error when calling its classFactory() method
Traceback (most... -
- Hi Mathieu,
this can be a plugin issue after all. I disabled all plugin but the "new memory layer" one and the crash ... -
- Marco, are you running QGIS on windows or linux?
-
01:06 AM Bug report #7927: composer fails to export with high dpi, without any message
- The GarminCustomMap plugin is facing a similar problem (e.g. #5077) when directly importing the mapCanvas, I think.
L... -
- Fixed in changeset commit:"9259e27c415b651ba49730adc098b798dc531908".
2013-11-13
-
- I tried exactly those steps and cannot replicate here (todays master). Any special options that need to be set?
-
- Export of polygons from Bremen-latest works for me without any crashes.
Also available in: Atom