Activity
From 2012-04-22 to 2012-05-21
2012-05-21
-
11:59 PM Bug report #5621: make browser remove the file extensions when dragging and dropping layers into ...
- Rasters are also going to support D&D.
Rasters and vectors must be consistent.
File extension must be displayed in ... -
05:48 PM Bug report #5621: make browser remove the file extensions when dragging and dropping layers into ...
- Giuseppe Sucameli wrote:
> Etienne Tourigny wrote:
> > have a consistent behaviour. Which is best?
> >
> > 1) Always... -
05:48 PM Bug report #5621: make browser remove the file extensions when dragging and dropping layers into ...
- Giovanni Manghi wrote:
> Etienne Tourigny wrote:
> > I guess for rasters it's ok to always have the extension, right?... -
- Etienne Tourigny wrote:
> have a consistent behaviour. Which is best?
>
> 1) Always adding the extension and strippi... -
- Etienne Tourigny wrote:
> I guess for rasters it's ok to always have the extension, right? Because there are no othe... -
> 2) Never adding the extension and adding it in the legend
I like more this because is a feature often requested b...-
05:13 PM Bug report #5621: make browser remove the file extensions when dragging and dropping layers into ...
- I guess for rasters it's ok to always have the extension, right? Because there are no other D&D operations. Unless I...
-
- Here is the commit:
https://github.com/qgis/Quantum-GIS/blob/a2b80be89b1d183cfeb69bc019e6fcaddb4bb404/src/providers/... -
- Giovanni Manghi wrote:
> Etienne Tourigny wrote:
> > I am probably responsible for that... I thought it was more expl... -
- Giovanni Manghi wrote:
> what about allowing have the extensions added as an option in qgis general properties?
In g... -
- what about allowing have the extensions added as an option in qgis general properties?
-
- Giovanni Manghi wrote:
> Etienne Tourigny wrote:
> > I am probably responsible for that... I thought it was more expl... -
- Etienne Tourigny wrote:
> I am probably responsible for that... I thought it was more explanatory to know what the so... -
- I am probably responsible for that... I thought it was more explanatory to know what the source is (i.e. tiff vs. net...
-
11:55 PM Feature request #3278: Explode selected features
- Related to #3834
-
- Related to #3834
-
- Related to #3278
-
09:27 PM Bug report #5597: External URL access via PyQt crashes QGIS on Mac OS X
- Well, I just installed Ubuntu Pangolin 12.04 and loaded up QGIS 1.8, which is compiled against Qt 4.8.1 and it does n...
-
09:19 AM Bug report #5597: External URL access via PyQt crashes QGIS on Mac OS X
- Let's hope you have found the source of the phantom crashes in trunk on OSX. Perhaps this is also related to the cras...
-
- Done some more research, and think I have maybe found where to look for the problem/fix. A core C++ dev will need to ...
-
06:38 PM Feature request #5587: v.in.ogr.qgis should allow us to ignore details
- Thanks. From the best I can tell, this is not yet available in 1.7.4? Or if it is, it's not available in a repository...
-
- This problem is due to a QT issue...
A solution may be to use a non-native QFileDialog but it should be avoided.
A ... -
03:27 PM Bug report #5327: Nodetool partially broken on qgis-master
- Giuseppe Sucameli wrote:
> I suppose the geometry is not updated after the vertex is moved and the following steps se... -
- I suppose the geometry is not updated after the vertex is moved and the following steps seem to trust me:
1. move a ... -
03:20 PM Bug report #4011: Map canvas flickers when content is dragged
- It would be helpful to find out which versions of Qt produce the crashed from #2714 - for those ones the workaround c...
-
- Matthias Kuhn wrote:
> I reverted patch commit:f4d26d6211830a866030a333236dcfbf15e077aa and the flicker disappeared. ... -
- I have commited more changes to my pull request. Once commited and built, I will send a mailing list email toask peop...
-
- I use and dev on linux, and sometimes test on windows. I will post another, permanent fix today(for stray buggy GEOGC...
-
- Probably that db has no spatial_ref_sys table and then it's an invalid SL database.
-
- Probably that db has no spatial_ref_sys table and then it's an invalid SL database.
-
08:50 AM Bug report #5475: Problem to insert splitted geometries in postgis
- I agree that having a dialog similar to QgsMergeAttributesDialog after the split operation would be simpler approach ...
-
> Anyway, today I worked on this issue and I solved many problems! It seems be not a GEOS bug!
> I'll do a git pull ...-
07:41 AM Bug report #5617: Unexpected results from "union" and "intersection" tool, maybe others
- Giovanni Manghi wrote:
> Hi Salvatore,
> probably the "shared" segment on the left is not perfectly overlapped betwee... -
07:09 AM Bug report #4486: Diagrams: export to image or pdf (or direct printing) doesn't respect Print Com...
- Still a big problem as of version 1.9 !
1) All exports of diagrams overlay fails when set to MM ... as described by A... -
- Filipe Dias wrote:
> I did some more tests in 2 PCs
>
> With tiff - on a new and clean project (opened, loaded .tiff... -
- Data are read twice to get average first and stddev in second pass.
I am not sure if it may be much faster even calc... -
- With current master on Linux and your mdt_aster_pt-tm06_GeoTIFF.tif imported to GRASS it loads in about 3s using by d...
2012-05-20
-
12:39 AM Bug report #5486: SRS error for new SpatiaLite layer in old SL DBs
- See subject and comment #9: yes, this is due to old DBs
-
- Unable to reproduce it. Probably the problem depends on the used database (old or what?).
Could you provide a small ... -
12:17 AM Bug report #5475: Problem to insert splitted geometries in postgis
- >(see comment 15)
Ah true, the comment list is too long to keep the overview :-) -
- Marco Hugentobler wrote:
> Another possible solution would be to show QgsMergeAttributesDialog after a split operatio... -
- Another possible solution would be to show QgsMergeAttributesDialog after a split operation (the attribute form is le...
-
- The contextual menu patch can be a useful tool, anyway I would open the form dialog at the end of the split operation...
-
07:00 PM Bug report #5598: CRS attribution algorithm for newly added layers broken in qgis-master (upcomin...
- Etienne, I've just tested a osgeo4w QGIS windows build (based on commit:c64b715) and - yay - the attached shapefile i...
-
- What gdal version are you using? works here with gdal 1.9, even before changes in pull request 144.
-
02:04 PM Bug report #5622 (Closed): layer properties, general, provider-specific options, encoding can not...
- In Qgis 1.7.x, you can choose and save the encoding (p.e. utf8, system) of the dbf-file. In 1.8, you can choose the e...
-
12:17 PM Bug report #5615: Qgis crashes frequently when digitizing streams over aerial images (via WMS and...
- I did some more tests in 2 PCs
With tiff - on a new and clean project (opened, loaded .tiff and shp and started digi... -
- Filipe Dias wrote:
> Yes it happens on a different machine, with a clean installation. Did you "push" things? Sometim... -
- Fixed in changeset commit:"c2118e744f94567ae8c503649ed3e2e23345e716".
-
- subject says it all
-
- Salvatore Larosa wrote:
> Also, I tested Line Intersection and Clip tools but w/out success I always get a blank vect... -
- Also, I tested Line Intersection and Clip tools but w/out success I always get a blank vector!
In PostGIS, as Giovan...
2012-05-19
-
- Yes it happens on a different machine, with a clean installation. Did you "push" things? Sometimes it only takes a fe...
-
- Hi Filipe,
I believe we already discussed this issue privately recently. I gave it a go another time with the provid... -
- I've done that, as well as removing the custom crs from the recently used crs. QGIS still ends up creating a custom C...
-
- Just saw this - you can delete the user-defined crs from your personal db with Settings-Custom CRS
-
- Hi
this is probably because you already have that user-defined crs in your personal srs.db . This happened to me whe... -
- Etienne, thanks for looking into this.
I've compiled the latest revision of qgis-master, which includes your commit... -
- I have addressed your concern, and also added a test which should point out any new regressions.
https://github.com/... -
- OSRExportToProj4 always inserts a trailing space, and we should consider that user input could have a trailing space,...
-
- Probably we should go deeper and search for the function that adds (or not removes) that trailing space, otherwise th...
-
- The pull request (by Etienne) was merged in master branch.
-
- The pull request (by Etienne) was merged in master branch.
-
- in this case (and probably most cases, it's the +nodefs . Most (all?) proj strings end with a space:
'+proj=longlat ... -
- Giuseppe Sucameli wrote:
> The string is splitted on space(s) followed by '+' sign, where spaces are in the param?
F... -
- Happy to know that my commit doesn't work as I expected :)
But I really don't understand why trimming the string fix... -
08:31 PM Bug report #5030: Incorrect layer CRS is shown when opening CRS selector more than once (recently...
- OK, this is partly fixed, but there is still a nasty bug.
If a layer's CRS is not in the list of recently used CRSs,... -
- If plugins are ported to sextante where appropriate this will probably no longer be necessary.
-
- Building on Arch Linux fails like this:...
-
- Fixed in master
-
- Fixed in master
-
- Fixed in master
-
- I'm not sure it is a QGIS issue at all: as this operations are done through the GEOS library it may be a GEOS issue a...
-
- I'm not sure it is a QGIS issue at all: as this operations are done through the GEOS library it may be a GEOS issue a...
-
- Other ideas:
# leave the attributes of the splitted feature untouched and require the use to use the merge attributes... -
- Hi Martin,
> Does that code produce a crash also outside of QGIS environment?
Not with PyQt. My help browser works ... -
- Does that code produce a crash also outside of QGIS environment?
2012-05-18
-
- Found a solution - the parameters passed to sql query must be trimmed.
This is a regression caused by commit:2a830... -
- The problem is that OGR's MorphFromESRI() wkt fixing code (see gdal bug #4345) does not work with this file, because ...
-
- Giovanni Allegri wrote:
> Ok, but I think that (if it would be possible/paid/sponsored/etc) it should be different. A... -
- Ok, but I think that (if it would be possible/paid/sponsored/etc) it should be different. A split operation should be...
-
- Giovanni Allegri wrote:
> I agree with you Jürgen. Anyway, I think that a good design is to resume from a commit if a... -
- I agree with you Jurgen. Anyway, I think that a good design is to resume from a commit if an error happens. In this c...
-
- Giovanni Allegri wrote:
> If we want keep the responsability out of the provider, I think we should advice the user a... -
- > It could, but that might also be considered a bug - if someone wants to set an explicit key (see #5608).
Mmm, you'... -
- Giovanni Allegri wrote:
> Actually this is a provider concern. The provider has the ability to know what kind of PK i... -
- ??Now it has a concrete value in it. Currently there is no way to know which attributes make up the primary key outsi...
-
- Giovanni Allegri wrote:
> Being impossible for Qgis to judge how to manage PKs, it should be left to the backend to m... -
- When I insert a new feature, the PK attribute is automatically filled with the following string:
@nextval('testsplit... -
- If the insert of the new features fails, the user receives a descriptive error message and still has the possibility ...
-
- GRASS console output is often very useful, and should be easy to inspect for
the user -
- Ok, I tested under 10.6.8/Qt 4.7.4 with no issues (external URLs loaded fine in QWebViews).
To remove PyQt from the ... -
05:47 AM Bug report #5617 (Closed): Unexpected results from "union" and "intersection" tool, maybe others
- dear all.
we discovered that there is an incorrect behavior with the geoprocessing functions in qGis with a particu... -
- Fixed in changeset commit:"56808d91a12ddb33b1d173778f3b47b136876093".
2012-05-17
-
01:25 AM Bug report #4011: Map canvas flickers when content is dragged
- I reverted patch commit:f4d26d6211830a866030a333236dcfbf15e077aa and the flicker disappeared. (This makes sense, as t...
-
12:24 AM Bug report #5616 (Closed): "Add" button is enabled when no PostGIS layers are selected
- In the "Add PostGIS Table(s)" dialog, when no layers are selected, the "Add" button is enabled. Clicking this button ...
-
- Hi Marco,
I agree that it should just be classified as high until more testing can show if QGIS src to be the cause.... -
- That looks like a packaging or Qt compilation problem on OS X. Therefore I think it should not be classified as a blo...
-
02:37 PM Bug report #4271: British National Grid CRS incorrectly specified when exporting to MapInfo
- A colleague pointed out behaviour matching this to me, except with the Australian Datums (GDA94 and ADG84) and associ...
-
- Fixed in changeset commit:"ed0cb5d468d56e4977c9e47bb9cb8852a74f87d0".
-
- Giuseppe Sucameli wrote:
> The problem occurs again (regression?).
> The first primary key for views is not pre-sele... -
- Giuseppe Sucameli wrote:
> The problem occurs again (regression?).
> The first primary key for views is not pre-sele... -
- Giuseppe Sucameli wrote:
> The problem occurs again (regression?).
> The first primary key for views is not pre-sele... -
- Giuseppe Sucameli wrote:
> The problem occurs again (regression?).
> The first primary key for views is not pre-sele... -
- Giuseppe Sucameli wrote:
> The problem occurs again (regression?).
> The first primary key for views is not pre-sele... -
- Giuseppe Sucameli wrote:
> The problem occurs again (regression?).
> The first primary key for views is not pre-sele... -
- Giuseppe Sucameli wrote:
> The problem occurs again (regression?).
> The first primary key for views is not pre-sele... -
- Lee Hachadoorian wrote:
> Tested with master. Can confirm correct behavior, so this is an old/already fixed problem. ... -
- Lee Hachadoorian wrote:
> Tested with master. Can confirm correct behavior, so this is an old/already fixed problem. ... -
09:17 AM Bug report #5608: Value in Primary Key Field with Sequence Is Ignored When New Feature Is Added
- Tested with master. Can confirm correct behavior, so this is an old/already fixed problem. Affected version should ha...
-
- I've been trying to digitize a number of streams over (1) Bing aerial layers, (2) Bing images obtained from WMS and (...
-
- Fixed in 783b67f1baf2a6de2e709499f7698966ce22e50f
2012-05-16
-
02:47 PM Feature request #5612 (Closed): Add data defined symbol in new symbology (is/was available in old...
- It would be great to be able to assign a unique symbol to unique classified values in new symbology interface, the sa...
-
- in the Layer Properties / Style tab (using the new symbology interface) if I classify a layer, then select multiple s...
-
- After using the MS SQL Server driver and the query builder to filter the imported layer/table, the attribute table is...
-
01:44 PM Bug report #5609 (Closed): Print composer probably generating pdf even if user canceled the file...
- Steps to reproduce:
# Open some big project - it's necessary to see the time difference, don't check this if output p... -
- Not reproducable with master.
Creating a table with:... -
- See thread [Qgis-user] QGis 1.7.4 possible bug with PostgreSQL/Postgis manual integer primary key? http://lists.osgeo...
-
- Already noticed. Hopefully fixed in commit:0bac04db. Let's wait for the next round of nightly builds.
-
09:23 AM Bug report #5607 (Closed): Qgis-nigthly builds from qgis.org/ubuntugis-nightly depends on libgdal...
- The new nigthly builds for the ubuntugis ppa depends on libgdal 1.7.0
> apt-rdepends qgis | grep libgdal
> Reading ... -
- I got an answer form the ubuntugis people...
> owner changed from ubuntu@… to jlarouche
> status changed from ... -
- Hi there...
I found something strange...
> apt-rdepends qgis | grep libgdal
> Reading package lists... Done
> Buildin... -
07:32 AM Bug report #5335 (Closed): "export/add geometry columns" make QGIS crash if you have previously o...
- Fixed in changeset commit:"d18529fc266cf03992a35244164b73e04e505a0e".
-
07:23 AM Feature request #5606 (Open): Defining column types for CSV imports
- At work we use Mac OS X. Microsoft Office for Mac no longer supports DBF exports, and much of our data that we'd like...
-
06:39 AM Bug report #5544: --configpath not used
- I think this should be a blocker. Several organizations rely on this feature in their more complex setups. In my opin...
-
- I think this should be a blocker. Several organizations rely on this feature in their more complex setups. In my opin...
-
- I think this should be a blocker. Several organizations rely on this feature in their more complex setups. In my opin...
-
- The zoom is not correctly restored when opening a project which has OTFR on while the canvas has OTFR off.
Steps to ...
2012-05-15
-
11:43 PM Bug report #4521: Map Tips does not work with on the fly CRS transformation
- Submitting a patch for this issue. But please review it carefully since I'm new both to C++ and Qgis core programming...
-
11:11 PM Bug report #5602: Identify disabled in WMS for grouped layers
- tested on:
- ubuntu 10.04 + qgis trunk
- win xp + qgis 1.7.4
- win server 2003 + qgis 1.7.4
- win 7 + qgis 1.7.4
All... -
-
- what platform and qgis version?
-
- I have a WMS service (mapserver) like this:
-group1
--layer1
--layer2
--layer3
If I open separately layer1, layer2... -
01:11 PM Bug report #5544: --configpath not used
- I tried on linux (fedora 17) with qgis master, same problem.
-
- I redid a try on Windows 7 and 1.8.0-Lisboa Lisboa, 3874b10
I deleted the previous qgis folder so the app would crea... -
- Sometimes in categorised and graduated symbology the number of classes is HUGE and if a user needs to change a proper...
-
- I have tested it on latest 1.8 under Mac OS X 10.7.3, too. Also crashes.
Here is where William Kyngesburye mentione... -
- Larry Shaffer wrote:
> Giovanni Manghi wrote:
> > If this is a regression since 1.7.4 please tag this as blocker.
>
... -
- Giovanni Manghi wrote:
> If this is a regression since 1.7.4 please tag this as blocker.
How do I change the status ... -
- subject say it all
-
- You can try custom QGIS build from NextGIS (http://nextgis.ru/en/nextgis-qgis/) where this issue solved
-
08:32 AM Bug report #5255: Wrong codepage of shapefile
- Recompiled GDAl and QGIS:
QGIS version: 1.8.0-Lisboa, QGIS code revision: a1255fc, Compiled against GDAL/OGR: 2.0dev... -
04:54 AM Bug report #5601 (Closed): print composer rendering
- Creating a custom point will not render correctly in print composer. The legend will display the point ok but the com...
-
- see also #5590
-
02:14 AM Bug report #5588: Print Composer - arrow size
- Yep, 1.7.4
-
- Ok I see, but I would say that this issue is related to #5588
-
- Screenshot attached. 1.7.4 on Windows server 2008 r2
2012-05-14
-
- Also, I noticed that in PROJ4.7 EPSG 3148 is defined:...
-
> In the same setup (GDAL and maybe PROJ.4)?
yes, on osgeo4w-
- Giovanni Manghi wrote:
> but the bottom line is that qgis 1.7.4 reads correctly also the provided prj
In the same se... -
- Salvatore Larosa wrote:
> It seem depends on the PRJ file definition!
> If you use the definition as below [1], QGIS ... -
- It seem depends on the PRJ file definition!
If you use the definition as below [1], QGIS acknowledges the correct ref... -
- Also, regarding testepsg not showing the +towgs84 value, I believe this is not linked to the issue raised here. The a...
-
- I don't think it's a gdal issue here: on a windows machine with both qgis (1.7.4) and qgis-dev (to-be 1.8) installed,...
-
- I can confirm the issue with the provided shapefile (tested on Windows/osgei4w) as actually I don't have a Linux mach...
-
11:02 PM Bug report #5598: CRS attribution algorithm for newly added layers broken in qgis-master (upcomin...
- I have the same problem as you. I believe it is a problem with gdal. testepsg shows the towgs84 is being stripped o...
-
- Something's seriously wrong with CRS attribution for newly added layers in qgis-master (i.e. soon to be 1.8). I have ...
-
- It happens with both the identify/select tools and affects also master.
-
- It happens with both the identify/select tools and affects also master.
-
01:22 AM Bug report #5599 (Closed): Unable to select/identify a polyline
- I have a shape file containing polylines. For some of the polylines, QGis fails to detect clicks on the lines (they d...
-
-
- If this is a regression since 1.7.4 please tag this as blocker. I cannot test myself as I have not access to a Mac.
-
- After typing the following commands at the Python Console, QGIS crashes (after entering last command):...
-
- I've confirmed that using a linux qgis build with gdal 1.9 fixes the displacement issue which was raised while filing...
-
- leonardo andres hardtke wrote:
> Nice! I found:
>
> Precise:
> deb http://qgis.org/ubuntugis-nightly precise mai... -
- Giovanni Manghi wrote:
> they are not new, but there is still no qgis package in ubuntugis/precise
>
> https://launc... -
- leonardo andres hardtke wrote:
> Nice! I found:
>
> Precise:
> deb http://qgis.org/ubuntugis-nightly precise mai... -
- Nice! I found:
Precise:
deb http://qgis.org/ubuntugis-nightly precise main
deb-src http://qgis.org/ubuntugis-nig... -
- The behavior was changed in commit:494561167 probably because if the the first suitable pkey is pre-selected the user...
-
02:08 PM Feature request #5596 (Closed): Pass feature Geometry to custom form
- Instead of the featureId which is 0 for a newely created feature
http://irclogs.geoapt.com/qgis/%23qgis.2012-05-13.log -
- More discussion on this issue:
http://osgeo-org.1560.n6.nabble.com/OSGEO4W-vs-Mac-OS-X-Qt-version-or-34-plugins-slig... -
- same thing as #5592
It is probably (surely) possible to make things better about the scalebar, but it is a documente... -
- same thing as #5592
It is probably (surely) possible to make things better about the scalebar, but it is a documente... -
- I consider this a bug but typically most people consider this sort of thing a "feature request".
Simply put, the cur... -
- I cannot confirm on master on Ubuntu. Can you please leave feeback and post a screenshot?
-
- I cannot confirm on master on Ubuntu. Can you please leave feeback and post a screenshot?
-
- I cannot confirm on master on Ubuntu. Can you please leave feeback and post a screenshot?
-
- The four corners for the "bounding box" of the arrow you add in print composer aren't actually surrounding the arrow ...
-
- I confirm it on master/ubuntu. If the user mistakenly just click instead of dragging a little the mouse, then it rema...
-
- I confirm it on master/ubuntu. If the user mistakenly just click instead of dragging a little the mouse, then it rema...
-
- I confirm it on master/ubuntu. If the user mistakenly just click instead of dragging a little the mouse, then it rema...
-
- "Attribute table" does this too. Other elements may also.
The reason this is a problem is because if I wanted to "mo... -
- I create a new composer, then click on the "Add arrow" button and then click on the blank space.
This gives me a pidd... -
- Alexander Bruy wrote:
> Now DB Manager in core, so I think we can close this ticket
you are right -
- Alexander Bruy wrote:
> Now DB Manager in core, so I think we can close this ticket
you are right -
- Hi,
as this is a request for a change of something/behaviour that already exist (and that by the way is documented i... -
- Hi,
as this is a request for a change of something/behaviour that already exist (and that by the way is documented i... -
- 1.7.4
I discovered this feature by accident. One minute I'm fiddling around with my boxes, the next my box is locked... -
09:57 AM Bug report #5593 (Closed): upside down labels turned upside up with new labelling machanism
- I have legacy data using points to label contour lines. The points have associated angle information which places the...
-
-
- Bug in GDAL already fixed, see http://trac.osgeo.org/gdal/ticket/4650
-
- zirneklitis - wrote:
> It's impossible to switch the code page for any shape files created by QGIS.
it is not qgis f... -
- When *.dbf file is re-saved with OpenOffice Calc, QGIS shows the correct characters with any given code page. Until ...
2012-05-13
-
- Hi Marco,
Marco Hugentobler wrote:
> The problem is that in Settings->Snapping options, avoid intersection is switch... -
- The problem is that in Settings->Snapping options, avoid intersection is switched on for the layer 'limites'. Therefo...
-
- very odd... if in the attached project I remove (not only unselect) the layer "limites", then it work all as expected.
-
- See the attached sample project. Open it.
* You will see a "pda" shape polygon layer that is empty
* Try digitize the... -
- This is very easy to fix (patches welcome), but will probably be not, as our efforts are mainly devoted to the new se...
-
- Per #4620, there's a GRASS bug that is totally preventing me from importing certain data into GRASS. However, it appe...
-
11:49 PM Bug report #3550: Labels scale dependency not saved
- Confirmed on Windows 7 32 bit, QGIS 1.7.4 411aff6, and on Android 3.2 QGIS QGIS 1.9.90 a8cf00d
I've inserted specifi... -
- It should work much better on 32bit machines with change commit:0bf56ab225789dacbd0e7a6523486eda2b054d67 for many cas...
-
- I know that the line/cross size can be set to 0, but this way around the map beside the annotations is not visible an...
-
- I'm not a guy that does a lot of digitizing, so I would be happy if someone can demonstrate that I'm the one doing th...
2012-05-12
-
- Alexander Bruy wrote:
> As I understand, shapefile can contain in LineString layer also MultiLineString geometries, a... -
- As I understand, shapefile can contain in LineString layer also MultiLineString geometries, and in MultiLineString la...
-
- As I understand, shapefile can contain in LineString layer also MultiLineString geometries, and in MultiLineString la...
-
- Well,
FID 0,2,3 wkbType() returns 2 and isMultipart() returns False;
FID 1 wkbType() returns 5 and isMultipart() ret... -
- Alexander Bruy wrote:
> Well, take a look at geometry with FID = 1. This one is MultiGeometry and you can easy check ... -
- Pierre-Luc Auclair wrote:
> I can't confirm it's a regression.
ok, I'll change the priority, change it again if you ... -
01:36 PM Bug report #5576: Paths with accented characters give error when opening files
- I can't confirm it's a regression.
-
10:53 AM Bug report #5579: qgis-plugin-grass fails to install from nightly build on Ubuntu Precise
- Problem was a corrupted package cache - manually uninstalling and reinstalling dependencies appears eventually to hav...
-
- Kevin Kenny wrote:
> > GRASS
> >
> > If you want the GRASS plugin make sure to install the optional package
> >
> >... -
- Kevin Kenny wrote:
> > GRASS
> >
> > If you want the GRASS plugin make sure to install the optional package
> >
> >... -
- Thanks for your time, and sorry that I'm being too stupid to install this stuff.
In the nightly repository, I see th... -
- Kevin Kenny wrote:
> that appears to be older than anything available for Ubuntu Precise from the ubuntugis-unstable... -
- Uhm, I've been installing from the nightly build repository - as it says in the first line of the problem description...
-
- Now DB Manager in core, so I think we can close this ticket
-
- Looks like duplicate of #3164 (same issue for cyrillic)
-
- Looks like duplicate of #3164 (same issue for cyrillic)
-
- Should be fixed by Martin's improvements for rule-based renderer
2012-05-11
-
- Check wxpy GRASS GUI for an example implementation
-
- subject says it all
-
- Anyway I add MultiLineString support in commit:033d58d454, and now attached file processed correctly. Now working on ...
-
- Salvatore Larosa wrote:
> I don't think that the problem is the MultiGeometries:
>
> [...]
>
> indeed it is not a M... -
- Alexander Bruy wrote:
> This is because attached layer contains MultiLineString geometry. It is odd that wkbType() fo... -
- I don't think that the problem is the MultiGeometries:...
-
- This is because attached layer contains MultiLineString geometry. It is odd that wkbType() for this layer returns 2 (...
-
- On Ubuntu 64bit
gio@sibirica:~$ qgis
Warning: loading of qgis translation failed [/usr/share/qgis/i18n//qgis_en_US]
... -
- There are no yet packages for QGIS in the ubuntugis/precise repository. If you want to install qgis-dev/1.8 in precis...
-
- I've been updating from nightly builds to get a QGIS compatible with the Ubuntu Precise system libraries. The last t...
-
- It is a blocker only if it is a regression (in qgis-master aka 1.8 aka Lisboa) since 1.7.4, con you confirm is a regr...
-
- Note, this doesn't seem to happen on every type of file formats.
.xls files do not work, while .shp do. -
- If you try to open a file and its path contains accented characters, the file will not load, giving error : ".../is n...
-
- Apparently a problem in @libqtwebkit-dev@ that is already fixed in unstable. cmake looks for @libQtWebKit.so@ in @/us...
-
09:28 AM Bug report #5571: Debian testing build fails after Qt update.
- To my knowledge this is a problem in the libqtwebkit debian package and should be reported to the creator of the debi...
-
- To my knowledge this is a problem in the libqtwebkit debian package and should be reported to the creator of the debi...
-
- Subject says it all.
-
- One more thing:
if a polygon is filled with a SVG with no round corners (to all the area is covered by the svg patch... -
- One more thing:
if a polygon is filled with a SVG with no round corners (to all the area is covered by the svg patch... -
- it affects also 1.7.4 so is not a regression/blocker.
-
- Tested on master:
pick a vector, make a categorised symbology by selecting a color ramp and a field and hit the "cla... -
07:53 AM Bug report #5574 (Closed): QGIS 1.7.4 fails to start on WinXP SP3 due missing mingwm10.dll
- After installing QGIS standalone QGIS-OSGeo4W-1.7.4-d211b16 it fails to start due to missing mingwm10.dll file. If fi...
-
- Blocker as policy for regressions.
-
- The problem occurs again (regression?).
The first primary key for views is not pre-selected, on Ubuntu 11.04 and QGi... -
- The problem occurs again (regression?).
The first primary key for views is not pre-selected, on Ubuntu 11.04 and QGi... -
- I have seen this recently on a Windows machine. Solved by uninstalling, removing proper qgis windows registry keys an...
-
- I have seen this recently on a Windows machine. Solved by uninstalling, removing proper qgis windows registry keys an...
-
- I have seen this recently on a Windows machine. Solved by uninstalling, removing proper qgis windows registry keys an...
-
- I have seen this recently on a Windows machine. Solved by uninstalling, removing proper qgis windows registry keys an...
-
03:49 AM Bug report #5572 (Closed): Project properties- Bad allocation
- I have been facing some issues accessing the project properties and georeferencer. I keep getting a "bad allocation" ...
-
- AFAIK, there is not a tool for that, so it would be important to understand why it does not work!
I did some test and... -
- AFAIK, there is not a tool for that, so it would be important to understand why it does not work!
I did some test and... -
- see also #5570 (that has a sample attached)
-
- New description:
Is not unusual to find shapefiles with field values that are above the limits for the column dataty... -
- New description:
Is not unusual to find shapefiles with field values that are above the limits for the column dataty... -
- New description:
Is not unusual to find shapefiles with field values that are above the limits for the column dataty... -
- New description:
Is not unusual to find shapefiles with field values that are above the limits for the column dataty... -
- New description:
Is not unusual to find shapefiles with field values that are above the limits for the column dataty... -
- duplicate of #5070
-
- duplicate of #5070
2012-05-10
-
01:34 AM Bug report #5571 (Closed): Debian testing build fails after Qt update.
- After the Qt library update in Debian testing (wheezy) last night, qgis will now not build:
-- Found Qt4: /usr/bin/q... -
04:54 PM Bug report #5570 (Closed): missed errors using `Check geometry validity` tool
- OpenJUMP found these errors which the `Check geometry validity` tool missed. They appear to be either Duplicate rings...
-
01:50 PM Feature request #5569 (Feedback): Turn all attribute table buttons into right click options
- Ref: v1.8 Lisboa
This is possibly a Windows-centric UI request, but it seems to me that having the buttons at the bo... -
- The way I raised the issue might have been poorly worded, but it'd be nice for the underlying issue not to be rejecte...
-
- + 1 !
It would be good to have a qgis nightly version, built against the ubuntugis-unstable gdal version (1.9.0).
Th... -
- The nightly builds are using the gdal version of the target distributions and are mainly to test if qgis builds again...
-
- The nightly builds are using the gdal version of the target distributions and are mainly to test if qgis builds again...
-
- The linux qgis nightly-build offered @ http://qgis.org/debian-nightly is built using a 2-years-old version of gdal (1...
-
- Hi!
I'm running 1.8 rc under Ubuntu 12.04 LTS, no entry for "project properties" on the menu yet.
here is the output ...
2012-05-09
-
01:31 AM Feature request #3472: Enhancement: create by length/angle / Rotate feature
- Making polygons by fixed length exists in plugin Enhanced polygon capture.
Rotate is possible with plugin Rectangles,... -
- Making polygons by fixed length exists in plugin Enhanced polygon capture.
Rotate is possible with plugin Rectangles,... -
12:27 AM Feature request #5561: Project Scale List
- Thanks for reviewing this patch. Good point for postpone it to Qgis after 1.8.
Please have a look to my use of the m... -
- Thanks for patch, I'll look at it ASAP. But as this new feature it can be applied only after releasing 1.8.0
-
06:05 PM Feature request #5561: Project Scale List
- Good job. Looks good to me. Might have to wait until 1.8 is out though as it's a new feature, not really a bug fix.
-
- This patch adds a new feature in Qgis Desktop project properties. The aim is to provide a way to configure and use a ...
-
- I agree. I might be able to get this in for 1.8 if not I can add it after. Shouldn't take much work.
-
- This may seem ridiculous to old hands, but most dialogs don't actually show this.
There should be a non-editable fiel... -
- to have more flexibility in scaling in different units it would be advantages to be able to have more decimal points ...
-
- Pierre-Luc Auclair wrote:
> Will the new engine eventually replace this screen ?
not sure if new labelling will go ... -
- Please try qgis-master and report back.
-
- Please try qgis-master and report back.
-
- Please try qgis-master and report back.
-
05:44 AM Bug report #5558 (Closed): QGIS 1.7.4 and < freeze when you close the "add postgis layer" without...
- This occurs since a long time and I never took a few minutes to report it.
When you first want to add a postgis laye... -
06:03 AM Feature request #5559: add tooltip on fields in identify window / attribute window / feature form
- Here is the picture
-
- Many times, fields name are short and not explicit enough to understand their meaning.
Comments are already availabl... -
- Identify window displays fields using alphabetic order. Sometimes it's great, sometimes it's confusing since feature ...
2012-05-08
-
- Thanks ! Did now know that ! Will the new engine eventually replace this screen ? Should I use the new engine exclusi...
-
- Pierre-Luc Auclair wrote:
> The one in vector properties.
that is the old engine, no more maintained and kept until ... -
- Pierre-Luc Auclair wrote:
> The one in vector properties.
that is the old engine, no more maintained and kept until ... -
- The one in vector properties.
-
- what do you mean with "normal" labelling symbology? the one available in the vector properties or the one available t...
-
- The "Field containing label" property is not saved, using the normal labeling symbology.
If this is relevant in any ... -
09:27 AM Bug report #5231: QGis crashes on Gradual styling
- I'm not sure about that. And I'm still waiting to get back my old laptop to reproduce some things. So till then I can...
-
- Victor Mensing wrote:
> I lost my password on this environmnet and was unable to ask for a new password.
the ID use... -
- I lost my password on this environmnet and was unable to ask for a new password. So i created a new account tot end t...
-
- When adding a new postgis Theme in version 1.7.4 all works fine. In this version the themes are black and I able to c...
-
- It was not due to compilation, but to a change in SL provider, I think: spatial_ref_sys of old SL db are not recogniz...
-
- It was not due to compilation, but to a change in SL provider, I think: spatial_ref_sys of old SL db are not recogniz...
-
- It was not due to compilation, but to a change in SL provider, I think: spatial_ref_sys of old SL db are not recogniz...
-
- It was not due to compilation, but to a change in SL provider, I think: spatial_ref_sys of old SL db are not recogniz...
2012-05-07
-
- Looks like a package problem to me then.
-
- same here on Debian/wheezy and QGIS master (173e9ad), everything works fine!
-
- works fine on ubuntu 11.04 and qgis master from the nightly build repo.
-
- Just checked, with today's master, same error.
Self packaged on Debian testing with master debian/rules -
- I can create a new spatialite layer without SRS problem (master branch from today). Is the ticket still valid?
-
- It seems related at #5328
drag & drop shp file throws this error:... -
- Seems this ticket can be closed now
-
- TJ Maciak wrote:
>Is there a better way to clone it that you can tell me how to do?
I already told you, the QGIS fi... -
-
- New description:
pick the attached shapefile. Clone the column "GEOID" to another one or just re-save the shape into ... -
- New description:
pick the attached shapefile. Clone the column "GEOID" to another one or just re-save the shape into ... -
09:34 AM Feature request #5546: Add a warning when vector fields/values are above the limits
- We did try to clone the column using the "Table Manager" plugin (in 1.74) but was not given an option to change the t...
-
- To change the column datatype of a shapefile you need to use the QGIS field calculator. Actually the normal operation...
-
- We converted a shapefile of neighborhoods from 4326 to 3857 epsg that contained a field called GEOID that was 13 char...
-
- Eric Marx wrote:
> I add this: "deb http://qgis.org/debian-nightly precise main" and I still can't download qgis-... -
09:02 AM Bug report #5545: There isn't repository for ubuntu 12.04
- I add this: "deb http://qgis.org/debian-nightly precise main" and I still can't download qgis-master.
":~$ sudo i... -
- The repository exist, is called ubuntugis but the packages for precise are not yet available. In any case is not a QG...
-
- The repository exist, is called ubuntugis but the packages for precise are not yet available. In any case is not a QG...
-
- I can't install qgis on ubuntu, because there isn't any ppa for ubuntu precise.
-
-
05:04 AM Feature request #5383: DXF feature
- Doing some tests, I found that the DXF feature 'Hatch' can be displayed as Polygon feature in QGis. I agree that this...
-
- Hi,
The actual version of QGIS's master has trouble using the "--configpath" boot parameter.
If you set C:\\OSGeo4...
2012-05-06
-
- Fixed in changeset commit:"be0e17be31784702c5f8b13b048e6afbe0e972de".
-
- It looks like another plugin that connects the activated() signal to its launching gui elements.
https://github.com/... -
- Yeah SpatialQuery is core.
-
05:37 AM Bug report #5543: OSX several plugins not loading
- Spatial Query comes with QGIS 1.7 (see note on clean install) and does not show up in the list on plugins.qgis.org - ...
-
- the plugins are 3rd party or core? If are 3rd party then you have to report the issues to the authors and/or to the p...
-
- Several plugins do not load in QGIS, e.g. QuickWKT and Spatial Query.
When selected from the menu or toolbar buttons... -
- Works as expected in master
-
- Works as expected in master
-
- Works as expected in master
-
- Works as expected in master
-
- Added in commit:1786b96ba80bd2
-
- Added in commit:1786b96ba80bd2
-
- Does this dialog even show up anymore. I can't get it to show up even when not clicking near a segment.
-
-
- Added in commit:69ef4deba198b
-
- Fixed in changeset commit:"ad0d711f6a84098268e97bbd5a9c894db67bc34e".
2012-05-05
-
- tested master on both ubuntu 12.04 and Windows and it works fine.
-
- Nick Hopton - wrote:
> Is this problem reproducible or is it just me?
It works fine on my Ubuntu 11.04, not confirmed. -
05:52 AM Bug report #5535: Merge rasters failure
- Is this problem reproducible or is it just me?
-
- This is not a GdalTools plugin issue, neither a QGis one.
I'm closing the ticket as invalid because I cannot do anyt... -
- This is not a GdalTools plugin issue, neither a QGis one.
I'm closing the ticket as invalid because I cannot do anyt... -
- No a blocker is only if it breaks a feature that used to work in a older version and that causes the main app to loos...
-
- See above, the issue was raised for QGIS 1.8 (Lisboa). If it's not just me and the problem is reproducible elsewhere ...
-
- Nick Hopton - wrote:
> I was in two minds about whether or not to flag this issue as a Blocker. On balance I think I ... -
- I was in two minds about whether or not to flag this issue as a Blocker. On balance I think I should have done this, ...
2012-05-04
-
01:37 PM Feature request #5396: Run algorithms in a different thread
- IT should go on the AlgorithmExecutor Class. All other classes call it when executing an algorithm. It is on the gui ...
-
11:21 AM Feature request #5396: Run algorithms in a different thread
- Was implementing this in the GUI code, but am not longer sure that is the right approach. Perhaps it should be lower ...
-
10:40 AM Bug report #5475: Problem to insert splitted geometries in postgis
- Hi,
I updated as "cause data corruption" as it actually replaces the original line by a shorter line at least for me)... -
- Seems this is depends on how SpatiaLite is build. It works if SpatiaLite compiled as loadable extension and don't wor...
-
- Seems this is depends on how SpatiaLite is build. It works if SpatiaLite compiled as loadable extension and don't wor...
-
- I wanted to start with this on monday anyway (with volter). First I have to find out what is really necessary to get ...
-
- Now it has been accepted, so no block. However, we probably need a team to evaluate licences before adding new code b...
-
- Paolo Cavallini wrote:
> Now qgis has been accepted in Debian main: can this be closed?
Probably not - or did we cha... -
- Now qgis has been accepted in Debian main: can this be closed?
-
- Not necessary any more with upcoming 1.8 release as it is close to master
-
- Not necessary any more with upcoming 1.8 release as it is close to master
-
- Not necessary any more with upcoming 1.8 release as it is close to master
-
- All the symbol dialogs are getting a make over in this year GSoC. Will take your feedback on board for the student w...
-
- Ok I have disabled the floating dock widgets for now. Doesn't give a good user experience with having a floating doc...
-
- Fixed in changeset commit:"479907f90355fb4e622ca7dedcf16e547072dc74".
-
> The 64bit installer would be independant of OSGEO4W. OSGEO4W doesn't have 64bit binaries. I suppose there are st...-
- Paolo Cavallini wrote:
> Could this be considered fixed when a 64bit Win package is available (both standalone and os... -
- Could this be considered fixed when a 64bit Win package is available (both standalone and osgeo4w)? Are there still 3...
-
- I don't think closing it as "won't fix" is a good move. Sure it's not a easy fix but I'm sure it can be fixed. The...
-
- http://lists.osgeo.org/pipermail/qgis-developer/2012-May/019905.html
Marco got the crashes also on qgis 1.6, so it s...
2012-05-03
-
- Just tested on a second machine (clean installation of both Windows and QGIS), with the same dataset and this still h...
-
- It stills crashes here, even after a clean installation. If no one else experiences this, it must be a local problem.
-
- just tested with your dataset and no crash
-
- This bug is related to #5536
Tested with Qgis 1.7.4 standalone and qgis 1.8.0 from osgeow.
When trying to refine ru... -
- Fixed in changeset commit:"8e55441783a3189f9dc88876f33d5a47885fe4df".
-
- Here the bt:...
-
10:02 AM Feature request #5540 (Closed): Add paper units to print composer bar scale segment size
- It would be nice if the bar scale for print composer had an option to use paper units for the segment size instead of...
-
09:44 AM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
- This problem is also happening in Ubuntu 12.04 32 bits, with Unity, QGIS 1.7.4-1~oneiric1.
@
qgis.bin: /build/buildd/... -
- To add, this problem isn't new, from time-to-time it comes and then goes away again. If I remember rightly, gdal_siev...
-
- It's the version of GDAL that came with Lisboa, GDAL 1.8.0 I think this is. If I try 'gdal_merge.py --version' I get ...
-
- AS Giovanni wrote, if it fails from shell it's a GDAL problem, not a QGis one.
What GDAL version have you on board? -
- It it fails from the command line, then is no QGIS fault, is GDAL fault.
-
- It it fails from the command line, then is no QGIS fault, is GDAL fault.
-
- It it fails from the command line, then is no QGIS fault, is GDAL fault.
-
- QGIS 1.8 (Lisboa), Ubuntu 11.10, 64-bit.
Raster -> Miscellaneous -> Merge fails with message 'The process crashed so... -
07:28 AM Bug report #5539 (Closed): Link on page cannot find destination.
- On page 'http://www.qgis.org/en/documentation.html', the link to 'QGIS community-team' cannot find destination. I ge...
-
- subject says it all
-
- Many users are unaware of such feature. Also it will ease the passage from spit to db manager (as the drag and drop f...
-
- Tested with Qgis 1.7.4 standalone and qgis 1.8.0.4 from osgeow.
When trying to refine rules in rule based labeling i... -
- Alexander Bruy wrote:
> I think remove this functionality is not good solution. Maybe it is better to add warning bef... -
- I think remove this functionality is not good solution. Maybe it is better to add warning before processing. Giovanni...
-
- Alexander, I confirm, you're right!
Seems you can not access the same datasource from different threads simultaneousl... -
- There are cases where it seems even to freeze.
-
- There are cases where it seems even to freeze.
-
- With you dataset I can confirm the issue. On Windows especially it takes a lot of time after hitting the "save" button.
-
-
- You may close this one. It no longer crashes after a clean installation. Thks
-
- just tested with your dataset and no crash.
2012-05-02
-
- Tested on a 200000+ records table, windows 7 and qgis master. No crash. Can you test another installation and/or data...
-
- Cannot confirm, tested on qgis-master, windows 7 and a 200000+ records table. It is pretty slow (but my VM has just a...
-
- I cannot confirm this, testing on qgis-dev, and a 240000 records table, after deleting 10 columns it took just a few ...
-
- if "save to new shapefile" is flagged, works fine!
Alexander, you're probably right! -
- It also occurs if the columns do not exist!
-
- Maybe I'm wrong but this is because QGIS don't support simultaneous access to one datasource from different threads
-
- Now, I am able to reproduce!!
Apparently, it occurs if before opens attribute table (very strange!)!
For reproduce:
... -
- Hi Alexander, the feedback is that I'm still able to get the crash consistently (but not always) on both Linux and Wi...
-
- Now you can create groups of rules - child rules will be applied only if parent rule matches (parent rules might not ...
-
- Now you can create groups of rules - child rules will be applied only if parent rule matches (parent rules might not ...
-
05:29 AM Feature request #5532 (Closed): Saved styles enhancement
- The saved styles feature is great, but not very practical to use. It is
Here are the problems :
- As soon as there ...
2012-05-01
-
- Running last night's nightly build for Ubuntu Precise, I opened an existing project and style. I was puzzled to see ...
-
- On further inspection this appears to be a build problem with /usr/lib/qgis/crssync
Just running crssync generates th... -
- BTW, this tool duplicates SpatialQuery plugin functionality and probably should be removed
-
- Fixed in changeset commit:"0b8e1130f1176f20b4d1c8de9c320da6e24b829e".
-
- Should be pretty easy to add support for the calendar, datetime, time pickers
-
02:19 AM Feature request #5530 (Closed): Toolbar icons for Georeferencer
- There are prepared special icons for Georeferencer, mainly with gcp-* names [1].
Toolbar could be composed from the f...
2012-04-30
-
-
- I have a shapefile with 124000 features and I tried to select a subset with a simple SQL statement FIELD = X with "Se...
-
06:46 AM Bug report #5517 (Closed): spatialindex includes in subfolder, not found by qgis
- Ah. But then spatialindex has a bug. I looked at all its internal headers included by spatialindex.h, and they are ...
-
- Ah. But then spatialindex has a bug. I looked at all its internal headers included by spatialindex.h, and they are ...
-
- No problem here under Linux!
I did some tests on SHP with 20000 selected records! slightly slows, but it was expected... -
- It affect both Master and 1.7.4 and the exact number of features is 11438.
-
- what version of QGIS? There is any difference between 1.7.4 and master? What means "high", 1000? 100000? 1000000?
-
- "Show selected only" in the Attribute table causes QGIS to crash when the number of selected features is high
-
- Filipe Dias wrote:
> It happens with all shapefiles. The time that QGIS takes to delete a group columns increases exp... -
- It happens with all shapefiles. The time that QGIS takes to delete a group columns increases exponentially with the n...
-
- Filipe Dias wrote:
> Just shapefiles but I cant add the original data, since its confidential.
so it happens just wi... -
- Just shapefiles but I cant add the original data, since its confidential.
-
- it happens with all vectors? just shapefiles? also other datatypes (postgis, spatialite. etc.)? Eventually add sample...
-
- QGIS takes 5 minutes to delete 10 columns, while the Table Manager plugin does this in 5 seconds.
-
- The Union tool behaves erratically when trying to merge several shapefiles sequentially. At some point QGIS only merg...
2012-04-29
-
01:40 AM Bug report #5520 (Closed): Wrong boundingbox values in GetCapabilities for empty layers
- For layers without any feature the bbox calculation for the GetCapabilities request is wrong. The result is some 'non...
-
- @SPATIALINDEX_INCLUDE_DIR@ is the directory where @SpatialIndex.h@ is, so @FindSpatialindex.cmake@ should set it to @...
-
- The standard spatialindex installation places its headers in a subfolder of $prefix/include, ie @/usr/local/include/s...
-
- I agree, but I would change something! :-)
I would suggest:
* File
* Edit (only Undo/Redo, Cut,Copy and Paste Featur... -
- Our list of dropdown menus keeps on increasing. I think we should decide a more predictable sorting order for it. I s...
-
- here works fine!...
-
- When I try to create new SpatiaLite database (using Layer - New - New SpatiaLite Layer) I get next error after adding...
-
- Is it still confirmed after Alexander's commit (commit:d3a50e8bcb)?
I cannot seem to reproduce it! -
- Fixed in commit:d3a50e8bcb
-
- Fixed in commit:d3a50e8bcb
-
- Salvatore Larosa wrote:
> I changed the subject and category for this ticket and I will open a new ticket for Field C... -
- I changed the subject and category for this ticket and I will open a new ticket for Field Calculator.
I guess it is m... -
- I changed the subject and category for this ticket and I will open a new ticket for Field Calculator.
I guess it is m... -
- I changed the subject and category for this ticket and I will open a new ticket for Field Calculator.
I guess it is m... -
- Fixed in changeset commit:"4e70885db9156a5e357c119745a585106ac8ea25".
-
- The following functions ($x and $y) return 0 value if geometry is Multipoint type:...
2012-04-28
-
- Nathan Woodrow wrote:
> This is a still a problem in master and is a major bug as it affects how the node tool behave... -
- This is a still a problem in master and is a major bug as it affects how the node tool behaves, and not in a good way...
-
- This seems to be a bug with Qt and having more then one QMainWindow with dock widgets. I did find a bug report one da...
-
- Did it ever update like that. I don't think it did. The auto update switch only means layers will be added and remo...
-
- We almost reached the end!
I found the solution, thinking that it was also easy!
Rightly, to represent a MultiPoint ... -
- Salvatore Larosa wrote:
> Worth to file a new ticket for?
I added Jurgen as watcher (hi Jurgen). Let's see if he can... -
- Worth to file a new ticket for?
-
- Probably a problem of API?
I ran the following test:
in ftools plugin adding (+) to doGeometry.py:... -
2012-04-27
-
07:24 PM Bug report #5511: VRT files not opening on Master.
- I'll try that underscore trick on Monday, but today I re-tested the same file on a 32-bit Ubuntu and worked OK?, the ...
-
- Repeat:
in VRT file changes from:... -
- OK, just tried same file under Win and 1.7.4 and it's working here !
-
- Tested on Linux:
QGIS version 1.9.90-Alpha QGIS code revision exported
Compiled against Qt ... -
- CSV file name in SrcDataSource must be identical to the file itself.
Note that in the VRT file it is missing undersco... -
- Windows / Linux ?
GDAL/OGR version ? -
- I installed the QGIS Master today; on a quick tour I noticed that my old VRT files that were working on previous QGIS...
-
- If there's no "Union tool" that's ready to use and to be ported to Sextante, then yes this ticket should be moved to ...
-
- Filipe Dias wrote:
> Maybe there's already such a tool in the open source world? If yes it could be added to Sextante... -
04:38 AM Bug report #5508: DBF encoding and cyrillic values
- Thanks, Giovanni
I knew about this issues, but problem stay unsolved because: 1) .cpg not working correctly under Win... -
- Duplicate #5255
-
- Duplicate #5255
-
- does now seems a QGIS problem but a gdal/ogr 1.9 one, see here
http://ssrebelious.wordpress.com/2012/03/11/qgis-and-... -
> The word file problem seems a bit more difficult, though...
the same applies also to shapes without the .prj file...-
- While we think about a more global solution, there is an easy one for those modules like GDAL warp, that change the C...
-
- We can close indeed. Support for SLD has been added in 1.8 and works pretty well.
-
- We can close indeed. Support for SLD has been added in 1.8 and works pretty well.
2012-04-26
-
- Maybe there's already such a tool in the open source world? If yes it could be added to Sextante.
-
- should not be better to add this feature to "ftools" (the vector menu) and then expose this in Sextante?
-
- "Union" tool that allows more than 2 input features
The only software that I know that does this is arcgis
http://w... -
- I have a problems with cyrillic symbols after upgrade QGIS (by OSGeo4W)
First, no longer work correctly setting of th... -
12:23 PM Feature request #1726: Styled Layer Descriptor (SLD) Support
- Can this be closed based on http://www.webrian.ch/2012/04/native-sld-support-in-qgis.html?
-
- Can this be closed based on http://www.webrian.ch/2012/04/native-sld-support-in-qgis.html?
-
- Also from PostGIS Provider with a MultiPoint geometry doesn't work!
Instead, in MultiPolygon and MultiLinestring ones... -
- Salvatore Larosa wrote:
> I noticed that 3D Shapefile works fine, the issue occur when input file is of type MULTI-ge... -
- Giovanni Manghi wrote:
> can you make a test with a multi-polygon?
I need of a sample data for that!
>I feel that ... -
- Salvatore Larosa wrote:
> I'd say it is, the origin of problem is the same,
> but here the sample data could may be u... -
- Salvatore Larosa wrote:
> I'd say it is, the origin of problem is the same,
> but here the sample data could may be u... -
- I'd say it is, the origin of problem is the same,
but here the sample data could may be usefull to testcase!
In #5293... -
- Salvatore Larosa wrote:
> Hi Giovanni,
> it is only a MultiPoint geometry vector!
so is this duplicated of #5293 ? -
- Victor Olaya wrote:
> I would like to tell QGIS when opening the layer something like "use the output layer CRS if th... -
- A dropdown seems ok to me.
-
-
- The dialog window in GDALTools (just tested the virtual raster>select folder) does not allow the user to access to th...
-
03:06 AM Bug report #5498 (Closed): Make the default directory to the users "home" directory after a fresh...
- On windows (using the standalone installer), the default directory after a fresh install is where QGIS was installed ...
2012-04-25
-
- Hi Giovanni,
it is only a MultiPoint geometry vector! -
- Is the attached sample a 3d vector?
-
02:46 PM Bug report #5497 (Closed): add geometry column error
- Problem with adding geometry column to some kind of shapefiles (attached zipped shp file with 3 points).
After execu... -
- Now Raster Terrain Analysis plugin includes 5 tools. Should we add all this tools as separate icons or maybe it is be...
-
- Added in commit:17e00c80f5
-
- Added in commit:17e00c80f5
-
- Done in commit:2c04b0a2d2 and commit:22a045ff12. Icons by Robert Szczepanek
-
- Done in commit:2c04b0a2d2 and commit:22a045ff12. Icons by Robert Szczepanek
-
- Can you attach sample data and exact steps on how replicate this issue?
-
05:27 PM Bug report #5487: QGIS crash when reshaping a polygon
- A further note - I think that this might be happening when / where the geometry being reshaped has another error with...
-
- did you tested qgis-master? it has a better search/selection dialog than 1.7.4
-
- It would be very useful to change the way the CRS selection dialog works. Currently, searching "nad mtm" gives no res...
-
02:47 AM Bug report #5067: QGIS crashes on Linux when adding MySQL layers
- Using the OGR provider (Add Vector Layer) and specifying MySQL database and entering in the parameters of the connect...
-
02:09 AM Bug report #5491 (Closed): ECW_EULA.txt in QGIS 1.7.4 standalone inappropriate
- ECW_EULA.txt included in the standalone Windows distribution of QGIS 1.7.4 is the EULA of the old 3.3 ECW SDK. But QG...
-
- The following error is displayed during a Debian install of current master:
------
Preparing to replace qgis-provider...
2012-04-24
-
- >hen the output file contains CRS information, it seems strange to me that sextante forces it to the input CRS, whate...
-
09:59 AM Bug report #5456: Output does not have the same CRS of input if input is tiff+worldfile
- - When the output file contains CRS information, it seems strange to me that sextante forces it to the input CRS, wha...
-
- the problem is that, when you use a tiff+world file, you are using a format that cannot store CRS info...so there is ...
-
- I'm surprised about
> SEXTANTE "forces" the layer to be opened in the same CRS as the input (quite logical...)
Is ... -
- For OTB it is more or less the same as GDAL : a tiff + world file is interpreted as being WGS84.
If for the output y... -
- Yes, that is not good, but now only a default value can be set...and the default value cannot change for each layer. ...
-
- Currently only layers can be.
It is usefull also for all other types (number, string, file, crs, ...)
Tried gdalwarp... -
- Yes, it was my dummy backtranslation from the IT GUI.The real message is:
Failed to load SRIDS: no such table: spati... -
- Is the real message "Failed to load SRIDS"?
-
- This should affect also the code frozen for the 1.8 release, so I'll tag this as blocker as is a regression.
-
- When creating a new Spatialite vector, selecting a SRS results in an error:
Impossible to load SRIDS: no such table:... -
- I hope this is the right place for this, but when digitising (in this case using the feature replace tool I'm getting...
-
- It seems a problem when generating the gid param value for the insert statement. AFAIU the attributes are by default ...
-
-
- Giovanni Manghi wrote:
> is this a regression that is present also in the code freezed for the 1.8 release? if yes pl... -
- Giovanni Manghi wrote:
> is this a regression that is present also in the code freezed for the 1.8 release? if yes pl... -
-
- Tim Sutton wrote:
> Note that the issue is actually that the pkey is duplicated and thus the insert fails.
is this a... -
- if this is a regression (since 1.7.4) we should tag this as "blocker".
-
03:12 AM Bug report #5480 (Closed): Map Composer doesn't refresh the legend
- Hi, using qgis-dev on windows 7.
I create a composer. Add a map object, after this add a legend object.
The legend ob... -
- Fixed in changeset commit:"b54e837fdd417f17e896ed2791c64deb185785f0".
-
- I try to create a new shapefile.
Layer -> New -> New Shapefile Layer.
I give it some attributes, press "ok" and get t...
2012-04-23
-
- from r146 there is a tool that allows you to graphically define the region setting. It is in the algorithms tree, und...
-
- Not really: we would still miss the browser and the digitizer.
-
- And if somehow would be ever possible to set (in Sextante) the region extent and resolution (in similar way as it is ...
-
- Currently, the plugin generates locations on the fly. It would be good if, in case a region etc. is defined by openin...
-
12:52 AM Feature request #5479 (Open): Support copy/paste of objects in modeler
- I´d like to see support for copy/paste of objects in modeler. Sometimes you need multiple versions of the same tool, ...
-
- Paolo Cavallini wrote:
> I assume you mean reenabling it just for the distro who ship old SL, right?
right. -
- I assume you mean reenabling it just for the distro who ship old SL, right?
-
- Jürgen Fischer wrote:
> Fixed in changeset commit:"c56491b11124f9ceefa9b6b3d501374755aac84c".
argl, how could I miss... -
- Fixed in changeset commit:"c56491b11124f9ceefa9b6b3d501374755aac84c".
-
03:16 PM Bug report #5475: Problem to insert splitted geometries in postgis
- Note that the issue is actually that the pkey is duplicated and thus the insert fails.
-
01:20 PM Bug report #5475 (Closed): Problem to insert splitted geometries in postgis
- When geometry of a postgis layes is splitted in 2 parts Qgis assign the same old gid to the new geometries instead of...
-
- sounds arbitrary - what qualifies @gid@ over the other candidates?
-
- When I load a new postgis view in Qgis 1.9 with more than one primary column I have to choose which is the correct o...
-
- Use different symbols for different kinds of input. For example, raster and vector could have different symbols/colou...
-
- Add support for undo/redo actions, such as deleting an object in modeler
-
09:26 AM Bug report #5196: QGIS crashes on style > categorized
- Update:
The column I was trying to categorize had NULL values. I added some random text and it worked.
It's still wor... -
- As of today, OTB algorithm descriptions are embedded in Sextante, and not dynamically generated from OTB.
It is gene... -
- We can reuse the parameter long description for the tooltips.
See r138 -
- This is the description.
-
- Some OTB app can output number or strings (ReadImageInfo).
This is not yet managed in the otb bindings. -
- Those too, perhaps, but I meant stuff like failure messages. E.g. if a parameter is missing, no dialog should pop up,...
-
- Hi again,
Victor Olaya wrote:
> What is the CRS in that world file?
for example a projected one. When you add such... -
- Probably wontfix, as GRASS modules are being ported to SEXTANTE
-
-
2012-04-22
-
- As far as Fedora is concerned:
http://groups.google.com/group/spatialite-users/browse_thread/thread/51450b1a61d8cc33... -
- What is the CRS in that world file? I guess SAGA and OTB produce the result in the same CRS as the input (or maybe th...
-
- Add a raster that is (ex) tiff+worldfile (not geotiff) and give it the right CRS in QGIS, then use it as input for on...
-
- Perfect!
There is a class named AlgorithmExecutor. That's where it should go. If you have questions, just ask me, ok? -
- I'll have a look at this during the next days, if nobody else is working on it.
-
02:31 PM Bug report #5401 (Closed): MS SQL Server Driver missing Query Builder
- Fixed in changeset commit:"ed8c3a1232e44ff4b879470882d5154631ec8230".
-
-
- Add support for adding boxes around a set of tools that perform a task together, i.e. creating groups of tools in the...
-
- Add possibility to select multiple objects with ”Select by rectangle” in modeler.
-
- I would like to be able to run the model in the window "SEXTANTE Modeler". For example:
1 Define data sets/strings e... -
- I do not understand the feature request. When designing the model, it is a conceptual design, there are no layers wit...
-
- Count the number of features (such as points, polygons) passing through the model. Each arrow could be labelled with ...
-
- aperi2007 - wrote:
> (I don't know if it crash on 32bit version).
it does -
- I tested it on windows 7 64 bit.
It crash !
Instead seem that the crash don't happen on windows xp 32bit.
It is a sp... -
- Not a QGIS issue, as it uses GDAL/OGR to handle rasters and vectors. GDAL 1.9 supports the reading DWGs if you compil...
-
- Not a QGIS issue, as it uses GDAL/OGR to handle rasters and vectors. GDAL 1.9 supports the reading DWGs if you compil...
-
05:18 AM Feature request #5451 (Closed): working with DWG format
- hello,
It will be great to have the capability to work direclty with DWG document(without dxf).
So to speak : to ope... -
- Perhaps a good solution should be to add to qgis a "phantom layer" always on top of the other layers.
This phantom la... -
- It would like to be able to define the files to be processed directly in the modeler. At current, they have to be def...
-
- I would like the modeler to create a log file with information on how the process worked. It could, for example, cont...
-
- When choosing a group name, how about letting the user choose from a list with the existing groups?
-
- Fixed in changeset commit:"c6be15ed98987c04127134b77c6d984316990caf".
Also available in: Atom