Activity
From 2012-03-26 to 2012-04-24
2012-04-24
-
11:41 AM Bug report #5456: Output does not have the same CRS of input if input is tiff+worldfile
- >hen the output file contains CRS information, it seems strange to me that sextante forces it to the input CRS, whate...
-
09:59 AM Bug report #5456: Output does not have the same CRS of input if input is tiff+worldfile
- - When the output file contains CRS information, it seems strange to me that sextante forces it to the input CRS, wha...
-
- the problem is that, when you use a tiff+world file, you are using a format that cannot store CRS info...so there is ...
-
- I'm surprised about
> SEXTANTE "forces" the layer to be opened in the same CRS as the input (quite logical...)
Is ... -
- For OTB it is more or less the same as GDAL : a tiff + world file is interpreted as being WGS84.
If for the output y... -
- Yes, that is not good, but now only a default value can be set...and the default value cannot change for each layer. ...
-
- Currently only layers can be.
It is usefull also for all other types (number, string, file, crs, ...)
Tried gdalwarp... -
08:13 AM Bug report #5486: SRS error for new SpatiaLite layer in old SL DBs
- Yes, it was my dummy backtranslation from the IT GUI.The real message is:
Failed to load SRIDS: no such table: spati... -
08:07 AM Bug report #5486: SRS error for new SpatiaLite layer in old SL DBs
- Is the real message "Failed to load SRIDS"?
-
07:50 AM Bug report #5486: SRS error for new SpatiaLite layer in old SL DBs
- This should affect also the code frozen for the 1.8 release, so I'll tag this as blocker as is a regression.
-
- When creating a new Spatialite vector, selecting a SRS results in an error:
Impossible to load SRIDS: no such table:... -
08:13 AM Bug report #5487 (Closed): QGIS crash when reshaping a polygon
- I hope this is the right place for this, but when digitising (in this case using the feature replace tool I'm getting...
-
07:29 AM Bug report #5475: Problem to insert splitted geometries in postgis
- It seems a problem when generating the gid param value for the insert statement. AFAIU the attributes are by default ...
-
-
- Giovanni Manghi wrote:
> is this a regression that is present also in the code freezed for the 1.8 release? if yes pl... -
- Giovanni Manghi wrote:
> is this a regression that is present also in the code freezed for the 1.8 release? if yes pl... -
-
- Tim Sutton wrote:
> Note that the issue is actually that the pkey is duplicated and thus the insert fails.
is this a... -
- if this is a regression (since 1.7.4) we should tag this as "blocker".
-
03:12 AM Bug report #5480 (Closed): Map Composer doesn't refresh the legend
- Hi, using qgis-dev on windows 7.
I create a composer. Add a map object, after this add a legend object.
The legend ob... -
- Fixed in changeset commit:"b54e837fdd417f17e896ed2791c64deb185785f0".
-
04:08 AM Bug report #5481 (Closed): New shapefile permission
- I try to create a new shapefile.
Layer -> New -> New Shapefile Layer.
I give it some attributes, press "ok" and get t...
2012-04-23
-
- from r146 there is a tool that allows you to graphically define the region setting. It is in the algorithms tree, und...
-
- Not really: we would still miss the browser and the digitizer.
-
- And if somehow would be ever possible to set (in Sextante) the region extent and resolution (in similar way as it is ...
-
- Currently, the plugin generates locations on the fly. It would be good if, in case a region etc. is defined by openin...
-
12:52 AM Feature request #5479 (Open): Support copy/paste of objects in modeler
- I´d like to see support for copy/paste of objects in modeler. Sometimes you need multiple versions of the same tool, ...
-
- Paolo Cavallini wrote:
> I assume you mean reenabling it just for the distro who ship old SL, right?
right. -
- I assume you mean reenabling it just for the distro who ship old SL, right?
-
- Jürgen Fischer wrote:
> Fixed in changeset commit:"c56491b11124f9ceefa9b6b3d501374755aac84c".
argl, how could I miss... -
- Fixed in changeset commit:"c56491b11124f9ceefa9b6b3d501374755aac84c".
-
03:16 PM Bug report #5475: Problem to insert splitted geometries in postgis
- Note that the issue is actually that the pkey is duplicated and thus the insert fails.
-
01:20 PM Bug report #5475 (Closed): Problem to insert splitted geometries in postgis
- When geometry of a postgis layes is splitted in 2 parts Qgis assign the same old gid to the new geometries instead of...
-
- sounds arbitrary - what qualifies @gid@ over the other candidates?
-
- When I load a new postgis view in Qgis 1.9 with more than one primary column I have to choose which is the correct o...
-
- Use different symbols for different kinds of input. For example, raster and vector could have different symbols/colou...
-
- Add support for undo/redo actions, such as deleting an object in modeler
-
09:26 AM Bug report #5196: QGIS crashes on style > categorized
- Update:
The column I was trying to categorize had NULL values. I added some random text and it worked.
It's still wor... -
- As of today, OTB algorithm descriptions are embedded in Sextante, and not dynamically generated from OTB.
It is gene... -
- We can reuse the parameter long description for the tooltips.
See r138 -
- This is the description.
-
- Some OTB app can output number or strings (ReadImageInfo).
This is not yet managed in the otb bindings. -
03:59 AM Feature request #5381: Info panel or tab for user feedback
- Those too, perhaps, but I meant stuff like failure messages. E.g. if a parameter is missing, no dialog should pop up,...
-
- Hi again,
Victor Olaya wrote:
> What is the CRS in that world file?
for example a projected one. When you add such... -
- Probably wontfix, as GRASS modules are being ported to SEXTANTE
-
-
2012-04-22
-
01:38 AM Feature request #4805: remove internal spatialite
- As far as Fedora is concerned:
http://groups.google.com/group/spatialite-users/browse_thread/thread/51450b1a61d8cc33... -
- What is the CRS in that world file? I guess SAGA and OTB produce the result in the same CRS as the input (or maybe th...
-
- Add a raster that is (ex) tiff+worldfile (not geotiff) and give it the right CRS in QGIS, then use it as input for on...
-
- Perfect!
There is a class named AlgorithmExecutor. That's where it should go. If you have questions, just ask me, ok? -
- I'll have a look at this during the next days, if nobody else is working on it.
-
02:31 PM Bug report #5401 (Closed): MS SQL Server Driver missing Query Builder
- Fixed in changeset commit:"ed8c3a1232e44ff4b879470882d5154631ec8230".
-
-
- Add support for adding boxes around a set of tools that perform a task together, i.e. creating groups of tools in the...
-
- Add possibility to select multiple objects with ”Select by rectangle” in modeler.
-
- I would like to be able to run the model in the window "SEXTANTE Modeler". For example:
1 Define data sets/strings e... -
- I do not understand the feature request. When designing the model, it is a conceptual design, there are no layers wit...
-
- Count the number of features (such as points, polygons) passing through the model. Each arrow could be labelled with ...
-
- aperi2007 - wrote:
> (I don't know if it crash on 32bit version).
it does -
- I tested it on windows 7 64 bit.
It crash !
Instead seem that the crash don't happen on windows xp 32bit.
It is a sp... -
- Not a QGIS issue, as it uses GDAL/OGR to handle rasters and vectors. GDAL 1.9 supports the reading DWGs if you compil...
-
- Not a QGIS issue, as it uses GDAL/OGR to handle rasters and vectors. GDAL 1.9 supports the reading DWGs if you compil...
-
05:18 AM Feature request #5451 (Closed): working with DWG format
- hello,
It will be great to have the capability to work direclty with DWG document(without dxf).
So to speak : to ope... -
- Perhaps a good solution should be to add to qgis a "phantom layer" always on top of the other layers.
This phantom la... -
- It would like to be able to define the files to be processed directly in the modeler. At current, they have to be def...
-
- I would like the modeler to create a log file with information on how the process worked. It could, for example, cont...
-
- When choosing a group name, how about letting the user choose from a list with the existing groups?
-
02:48 AM Bug report #5344 (Closed): Can't select square symbol in Simple marker
- Fixed in changeset commit:"c6be15ed98987c04127134b77c6d984316990caf".
2012-04-21
-
03:33 PM Bug report #5397: Field Calculator: crash when help is missing
- Jürgen Fischer wrote:
> Not reproducable on Windows.
As well as on Linux.
2012-04-20
-
- Fixed in changeset commit:"46adf1a017f2aa4cba8ec43f2a9b772442ce7754".
-
01:58 PM Bug report #5425: Remote PostGIS layer not compatible with features from local shapefile layer wi...
- Another observation; When viewing PROPERTIES > FIELDS of the remote PostgreSQL/PostGIS layer, the LENGTH and PRECISIO...
-
- If I load two layers that share the *exact same schema*, one being a remote PostGIS layer(layer 1), and the other bei...
-
- In qgis-dev 3147836.
When a layer has more object overlapped each-other.
Selecting one element using the table.
The s... -
- William Kyngesburye wrote:
> OK with me, I don't do PPC in my builds, Apple hasn't supported them in the OS for almos... -
- William Kyngesburye wrote:
> OK with me, I don't do PPC in my builds, Apple hasn't supported them in the OS for almos... -
- It works on Windows, but on Linux I get messages like (for postgresql)
New Database connection requested...
Connecti... -
07:52 AM Bug report #5420: GRASS gives python error if input layer path contains non ascii chars
- Hi Giovanni,
I found the problem. If my shapes have in a directory named with special characters, like 'ã' or 'ç' g... -
- Hi Pedro,
check also the sextante log and post any message that can be useful (of there is something more than the p... -
- Hello to all,
This is my first intervention here so i hope that i'm doing this right.
My versions are:
OS: Windows ... -
- Ricardo Silva wrote:
> Hi, this issue seems to still be unresolved
>
> I'm still getting the warning message from QG... -
- Ricardo Silva wrote:
> I'm still getting the warning message from QGIS, and then the error message from Mapserver whe... -
06:34 AM Feature request #3768: print composer & wms layers (max size)
- Hi, this issue seems to still be unresolved
I'm still getting the warning message from QGIS, and then the error mess... -
- Hi, this issue seems to still be unresolved
I'm still getting the warning message from QGIS, and then the error mess... -
- Hi, this issue seems to still be unresolved
I'm still getting the warning message from QGIS, and then the error mess... -
06:47 AM Bug report #5418 (Closed): Checkbox edit widget do not work on OsX
- sounds like a dup of #3024
-
- sounds like a dup of #3024
-
06:08 AM Feature request #4805: remove internal spatialite
- following Williams's suggestions, I've just performed few tests
about the pysqlite connector; here are my findings.
... -
- aperi2007 - wrote:
> I tested on qgis-dev E5D97F5.
> The crash seem disappeared.
> Is confirmed ?
still crashes here. -
- I tested on qgis-dev E5D97F5.
The crash seem disappeared.
Is confirmed ?
( I add another information.
The test was d...
2012-04-19
-
03:28 PM Bug report #5393: Separator with label in DB Manager menu
- I see the separator without any text, anyway I'm removing that text.
-
02:42 PM Bug report #5403: MS SQL Server - create new point feature not commiting change to table
- Hi Tamas just snet you an email to your gmail account with further details.
-
-
- Tested on OsX Snow Leopard with QGIS master. The widget always uses the "unchecked" value.
-
- fixed in r127
-
-
- Most probably a false positive. See "Trojan in OSgeo Windows download package":http://trac.osgeo.org/osgeo4w/ticket/...
-
- Most probably a false positive. See "Trojan in OSgeo Windows download package":http://trac.osgeo.org/osgeo4w/ticket/...
-
02:46 AM Bug report #5413 (Rejected): Virus in grass-6.4.2 package, QGIS 1.7.4
- Hello,
my proxyserver detect a virus in a package.
This is the error from the server:...
2012-04-18
-
- I think having the faces of developers visible to users will help understanding what's behind QGIS, i.e. real people ...
-
07:35 PM Bug report #5411 (Closed): Highlighted features are not at top of the canvas
- It is important to see highlighted features on the map, however in QGIS 1.7.4, highlighted features can be visually o...
-
05:15 PM Bug report #4509: Crash on SPARC when opening vector layer
- Found a couple of missed fixes in qgsgeometry.cpp - see new patch. Also found another file with the problem (qgsdista...
-
- Found a couple of missed fixes in qgsgeometry.cpp - see new patch. Also found another file with the problem (qgsdista...
-
- reverted in commit:e5d97f53
-
- reverted in commit:e5d97f53
-
- The copy constructor currently copy the mParams attribute, but doesn't copy the attributes initialized by the QString...
-
- Fixed in changeset commit:"e5d97f53e29c90b5b8d695c604e2540f2f499070".
-
01:54 PM Bug report #5409: Spatialite support broken since commit:4d6cc6d
- Hello,
attached screenshots of QGIS and teh related sqlite db.
QGIS-dev is installed from OSGeo4W -
- Hello,
attached screenshots of QGIS and teh related sqlite db.
QGIS-dev is installed from OSGeo4W -
- Hello,
attached screenshots of QGIS and teh related sqlite db.
QGIS-dev is installed from OSGeo4W -
- Could you supply a small example of a spatialite lite layer that fails in this way - preferably one with data that we...
-
- Trying to load a spatialite layer, Qgis reports:
dbname='C:/pojekte/testsqlite/testqgisspatialite.sqlite' table="tes... -
- Fixed in changeset commit:"e5d97f53e29c90b5b8d695c604e2540f2f499070".
-
01:36 PM Bug report #5407: MSSQL Server - tables are invalid layers for Build 116
- This is a problem with the host name getting passed to the provider. Tamas is working on a fix.
As a workaround y... -
- All tables imported fine using build 115. Updated to build 116, tried to import the same layers and all (~20 layers)...
-
10:26 AM Bug report #5272: Symbol level dialog causes QGIS crash
- I experienced this bug in 2 computer both of them with AMD 64 processor, Win 7 64bit. In both cases QGIS Master produ...
-
- Alessandro Ciali aciali wrote:
> Hi,
> I renamed .qgis folder but never has changed. I think the problem is not depen... -
- Jürgen Fischer wrote:
> Linux and Windows are fine with this. What's the situation on OS X?
At least for my builds ... -
- OK with me, I don't do PPC in my builds, Apple hasn't supported them in the OS for almost 3 years and all PPC models ...
-
- Can we assume that PPC Mac is no more supported?
-
05:32 AM Bug report #5404 (Closed): Python - ImportError: No module named DlgAbout_ui
- Already fixed in commit:24924a9e3a
-
- Already fixed in commit:24924a9e3a
-
- Closing for lack of feedback and as duplicate (ex: #2610). Reopen if necessary.
-
- Closing for lack of feedback and as duplicate (ex: #2610). Reopen if necessary.
-
- Closing for lack of feedback, reopen if necessary.
-
- Closing for lack of feedback, reopen if necessary.
-
- Close for lack of feedback and as it seems duplicate of #4452. Reopen if necessary.
-
- Close for lack of feedback and as it seems duplicate of #4452. Reopen if necessary.
-
- alobo - wrote:
> Union should have an option to integrate those fields with the same name
> in the new table (i.e., a... -
- Closing for lack of feedback, reopen if necessary.
-
- Closing for lack of feedback, reopen if necessary.
-
- Alexander Bruy wrote:
> Ok, but IMHO this is not an fTools issue. As I can see crash occurred during initialization o... -
- Closing for lack of feedback. Reopen if necessary.
-
- Closing for lack of feedback. Reopen if necessary.
-
- Closing for lack of feedback. Reopen if necessary.
-
- Closing for lack of feedback. Reopen if necessary.
-
- Vasco Nunes wrote:
> I use Windows7. Check this: http://youtu.be/wAXUdnemCP0
> The problem is that sometimes it works...
2012-04-17
-
- It works for me, however. Would you provide your sample data?
-
- We've checked out a table for editing (user has full permissions server side to edit), created a new point or polygon...
-
01:50 AM Bug report #5404 (Closed): Python - ImportError: No module named DlgAbout_ui
- An error has occured while executing Python code:
Traceback (most recent call last):
File "/usr/share/qgis/python/... -
- Jürgen Fischer wrote:
> David Paleino <[email protected]> is already working on a package (in Debian-GIS)
See also "p... -
- Sandro Furieri wrote:
> It's really a pity that Debian-GIS doesn't support pyspatialite:
> I'll try to ask Francesco ... -
- Hi Jürgen,
I fully agree with your considerations: pyspatialite seems to be
a key component, because QGIS strongly r... -
- Linux and Windows are fine with this. What's the situation on OS X?
-
- Ok, but pyspatialite (dependency of dbmanager) is not that common. It's in OSGeo4W, but not in debian and ubuntu yet....
-
- Ok, but pyspatialite (dependency of dbmanager) is not that common. It's in OSGeo4W, but not in debian and ubuntu yet....
-
- QGIS now requires the user to select the unique column.
-
- QGIS now requires the user to select the unique column.
-
- QGIS now requires the user to select the unique column.
-
- QGIS now requires the user to select the unique column.
-
- implemented in the new labeling. use the expression @$id@ as label.
-
- implemented in the new labeling. use the expression @$id@ as label.
-
- implemented in the new labeling. use the expression @$id@ as label.
-
- Tables are all listed and all other attributes of the tables are detected by the driver with the exception of the Pri...
-
- The SQL Server native QGIS driver recently added to the master is missing query builder capability on import. Also o...
-
- Richard Duivenvoorde wrote:
> Jef: did you already commit this? If not, please do and we close this ticket (and hopef... -
- Richard Duivenvoorde wrote:
> Jef: did you already commit this? If not, please do and we close this ticket (and hopef... -
09:24 PM Bug report #5247: setting the project to "google mercator" causes QGIS to crash
- I have the same problem with qgis installed from the osgeo4w installer using the current available version. Solved th...
-
- Not reproducable on Windows.
-
- In the Field Calculator, there is at least one help missing (regexp_replace). When I select the function, the help b...
-
- See also " [Qgis-developer] SRS: 'EPSG:40003' and QGIS":http://lists.osgeo.org/pipermail/qgis-developer/2011-May/0143...
-
- Currently the module execution freezes the main GUI.
Execution of the modules should not be done on the main thread. -
- duplicate of #4138
-
- duplicate of #4138
-
- you mean the multiple selection dialog or the fixed table dialog? They could be added to the parameters dialog someho...
-
- Not a bug in QGIS - and apparently fixed anyway.
-
- Not a bug in QGIS - and apparently fixed anyway.
-
- Not a bug in QGIS - and apparently fixed anyway.
-
- QGIS itself doesn't parse the PROJ.4 files. So if the issue still exists, it must be an upstream problem.
-
- QGIS itself doesn't parse the PROJ.4 files. So if the issue still exists, it must be an upstream problem.
-
- QGIS itself doesn't parse the PROJ.4 files. So if the issue still exists, it must be an upstream problem.
-
- QGIS itself doesn't parse the PROJ.4 files. So if the issue still exists, it must be an upstream problem.
-
07:35 AM Feature request #5341: Move the 'show features in canvas' option to the attribute table
- If this is implemented it would also be helpful to change the title of the table so that the user will know that only...
-
- The standalone installer repackages GRASS (and QGIS) from "OSGeo4W":http://osgeo4w.osgeo.org. Please check if GRASS ...
-
- After connecting to any database with DB Manager, in its Database menu strange separator appears (see attached screen...
-
- It was just an empty ticket to get Tamas's name in the Assigned to list. I thought you have to make/update a ticket ...
-
- ?
-
- Denis Rouzaud wrote:
> But there is no way to turn around this? This is strange that if you type the first chars and ... -
05:38 AM Feature request #4749: editable option for combo box in value relation editor cannot be used
- Okay, I understand.
But there is no way to turn around this? This is strange that if you type the first chars and pr... -
- Denis Rouzaud wrote:
> I found a good idea to use the "editable" option in Qt to let the user type the first characte... -
- closing for the lack for feed back - the postgres provider requires to select the pk of view now.
-
- closing for the lack for feed back - the postgres provider requires to select the pk of view now.
-
- Fixed in changeset commit:"be6b2a00076a0cc6d488ab75ab2c36e7f5970a21".
-
- it returns
An error has occured while executing Python code:
Traceback (most recent call last):
File "C:\\OSGeo4W... -
-
- closing for the lack of feedback - probably fixed anyway.
-
-
> wise will understand :-)
it wasn't my intention to be "boring", the title and description are just not very expli...-
2012-04-16
-
- Hi,
Probably as a consequence of a bug fix, it is not possible anymore to represent DXF closed polylines as polygons.... -
- Honestly, it is a bit difficult to reproduce for me, 1 year later. I tried with QGIS 1.7.4 for now.
I can't manage t... -
- I'll try to do that.
But I think no part of the responsible code was seriously changed. -
- Can you confirm with a recent (possibly master) qgis version?
-
12:12 PM Bug report #5162: points in polygon never ends
- No, the points are coordinates of fire pixels and the polygons are a vectorized ("polygonized")
raster landcover map.... -
- Hi Agus,
are for any instance this data 3d vectors (like exported from geomedia)? -
11:26 AM Bug report #5256: QGIS polygon Centroid (NewLabeling bug etc)
- Giovanni Manghi wrote:
> Serge Dikiy wrote:
> > Giovanni Manghi wrote:
> > > Can you please detail/describe better th... -
- Serge Dikiy wrote:
> Giovanni Manghi wrote:
> > Can you please detail/describe better the issue and the proposed solu... -
- Giovanni Manghi wrote:
> Can you please detail/describe better the issue and the proposed solution?
to understand th... -
- see also #4634
-
- Can you please detail/describe better the issue and the proposed solution?
-
- Can you please detail/describe better the issue and the proposed solution?
-
- Can you please detail/describe better the issue and the proposed solution?
-
- Can you please detail/describe better the issue and the proposed solution?
-
- Can you please detail/describe better the issue and the proposed solution?
-
- Point Sampling Tool takes a long time to complete for
a large nb of points (~20000) and many layers (~8). I note
that... -
- Information not requiring immediate user interaction should not be displayed as pop-up (modal) dialogs, but in a sepa...
-
- Pointers to the http-accessible docs should be made available.
Like :
http://www.orfeo-toolbox.org/CookBook/CookBook... -
- Different backends call the same analysis in different ways, so it may be difficult for an user to find the right mod...
-
08:29 AM Bug report #5354 (Closed): Scalebar problems in print composer on QGIS master
- Fixed in master branch
-
-
- Latest GRASS version is now 6.4.2. Please try again. Thanks.
-
- Latest GRASS version is now 6.4.2. Please try again. Thanks.
-
-
- Seems to work, with some simple testing.
-
- is this fixed now?
-
- Just tested on master (i.e. the upcoming 1.8), problem solved. Please test on master and reopen if necessary. Thanks.
-
- Just tested on master (i.e. the upcoming 1.8), problem solved. Please test on master and reopen if necessary. Thanks.
-
- Just tested on master (i.e. the upcoming 1.8), problem solved. Please test on master and reopen if necessary. Thanks.
-
05:25 AM Bug report #2947: GRASS plugin mapset permission blocks use if user doesn't own PERMANENT
- Running QGIS 1.7.4 and GRASS 6.4.2 (is that what you mean by "latest"?), I downloaded the uc_basic_spm dataset, and d...
-
- Hi, is this issue still confirmed with latest qgis/grass versions?
-
- Seems confirmed, so I'll change from feedback to new.
-
- Seems confirmed, so I'll change from feedback to new.
-
- Seems confirmed, so I'll change from feedback to new.
-
-
- can you test with master? thanks.
-
- Still true?
-
- I'll try.
So, for a layer you can use your own edit form by setting a file path in the layer properties dialog, unde... -
- Can you please explain better the issue?
-
- Can you please explain better the issue?
-
- see also #4504
-
- probably duplicate of #4821
-
- Giovanni Manghi wrote:
> Duplicate of #4486? Please check and leave feedback.
should not be the same issue, but anyw... -
-
- duplicate of #2113
-
- duplicate of #2113
-
- see also #4855
-
- see also #4855
-
- see also #4855
-
- QGIS uses OGR to write DXf files, if something wrong happens, then is OGR problem.
-
- QGIS uses OGR to write DXf files, if something wrong happens, then is OGR problem.
-
- This issue has been addressed here at the developer meeting and Juergen and Richard came out with a solution that sho...
-
- How do you connect to mysql, ODBC?
-
- How do you connect to mysql, ODBC?
-
- Can you please elaborate more? Where it is not possible enter values, in the table of attributes?
-
- Can you please elaborate more? Where it is not possible enter values, in the table of attributes?
-
- Alexis Viaud wrote:
> I haven't test on win XP with v1.7.4. I prefer you wait (as soon as possible).
>
did you test... -
- see also #4571
-
-
- see also #5259
-
- duplicate of #5327
-
- duplicate of #5327
-
- duplicate of #5327
-
- probably duplicate of #2482
-
- possible duplicate of #5239 (that has a patch attached)
-
- possible duplicate of #5239 (that has a patch attached)
-
- possible duplicate of #5239 (that has a patch attached)
-
- There is any news about this issue? Is confirmed on qgis-master?
-
- There is any news about this issue? Is confirmed on qgis-master?
-
- Can this be confirmed with the lastest plugin version? in any case I would close this ticket anyway as is a 3rd party...
-
- this need to be tested with a more recent GEOS version.
-
04:03 AM Bug report #4912: Segfault on exit-with-save
- I can't reproduce with master (58f754b) - I guess it was fixed..
-
- Can you please give it a try with qgis master? thanks.
-
- Cannot confirm on master and both linux and windows. Can you upgrade and try again?
-
- Did you used the "diagram" or the "overlay" tool. Sorry for the eventual confusion, the "overlay" tool is obsolete an...
-
- works here on master/osgeo4w, please reopen if necessary (attaching sample data). Eventually try a clean install with...
-
- works here on master/osgeo4w, please reopen if necessary (attaching sample data). Eventually try a clean install with...
-
03:22 AM Bug report #5326: Checking "on the fly CRS transformation" changes silently the selected CRS (usu...
- during the hackfest we discussed this, and agreed on the solution that if the otf was UNchecked that we disable/grey-...
-
02:52 AM Bug report #5373 (Closed): SQL Server new Provider fails on table name with _
- We get an error when we try to open a SQL Server Table which its name containts an underscore: "_".
To avoid the erro... -
- ok I didn't get right that the external repos were going to be removed. So I guess that the right move would be reall...
-
- No custom repos by default. All community plugin should go to the new repo, users can add other repos by hand.
-
- No custom repos by default. All community plugin should go to the new repo, users can add other repos by hand.
-
- Following a mail in the users mailing list it seems that the plugins from "bc consult" cannot be added to the new plu...
-
- Fixed in changeset commit:"51ff2b541398325c3c39689cef269fb684464b92".
2012-04-15
-
- Just tested on pure SpatiaLite:
SELECT pg.pkuid, pt.pkuid
FROM Polygons AS pg, points AS pt
WHERE ST_Intersects(pg.g... -
- Seems this is common problem for all fTools and SpatiaLite layers. See also #4571
-
- Seems this is common problem for all fTools and SpatiaLite layers. See also #4571
-
- Seems this is common problem for all fTools and SpatiaLite layers. See also #4571
-
- Seems this is common problem for all fTools and SpatiaLite layers. See also #4571
-
- Thanks Julien - now it works without errors, so "average" should be the default.
BTW, with the ortho.jpeg file you p... -
- The patch attached seems to fix the issue!
-
- The otb behavior is that the "elev" parameter default to "average", but "dem" is the first choice in the list, and ha...
-
- Apparently, a DEM layer is mandatory for this analysis, but the interface doe not require it, thus the command fails,...
-
- Seems this is more complex problem, I also found that many geometry operations don't work with SpatiaLite layers even...
-
- Short recall:
- QGIS has its own SpatiaLite data provider: this is intended
to be safely operable using any versio... -
11:47 PM Feature request #5371: Please improve the sponsors dialog
- Breakfast time :)
-
- I meant the page in the About.
-
- better open a project on redmine about the joomla web site?
-
- Adding their logos,and improving the formatting. Sizes should be scaled down from http://community.qgis.org/en/sponso...
-
- It would be nice if in case of an error, the user could automatically send the log (by clicking on an OK button) to a...
-
- Optionally, median and median absolute deviance (mad) should be included
instead of mean and sd for linear stretching... -
- 1. In old Symbology, selection is not displayed as filled yellow (or the color set by the user for selected features)...
-
- 1. In old Symbology, selection is not displayed as filled yellow (or the color set by the user for selected features)...
-
- Fixed in changeset commit:"a39d0b73629243b59316b2c29c64184b78e4db5e".
-
- I forgot I had this request here. I applied this as a part of my OSG bundling update: commit:4ecd56886c (master) and...
-
- I forgot I had this request here. I applied this as a part of my OSG bundling update: commit:4ecd56886c (master) and...
-
05:22 AM Bug report #5357: kml innerBoundaryIs
- I now think this must be a Google Earth bug. The example file I submitted was exported from (Save As) Google Earth. T...
-
-
- Although the kml you sent is viewable in GoogleEarth, I think your kml is not valid.
Where did you get it from?
Even... -
- Although the kml you sent is viewable in GoogleEarth, I think your kml is not valid.
Where did you get it from?
Even... -
- Implemented in commit:f74f70e6ea
-
- Implemented in commit:f74f70e6ea
-
- Fixed in changeset commit:"67b698e21f6e8487422de7152c7d6e6843f62256".
-
- Fixed in changeset commit:"3f4c11f0de800e68554a07a1da1152a1b901b04b".
-
- Fixed in changeset commit:"3f4c11f0de800e68554a07a1da1152a1b901b04b".
-
- Fixed in changeset commit:"3f4c11f0de800e68554a07a1da1152a1b901b04b".
2012-04-14
-
- Fixed in changeset commit:"0dc5080a99ea63db365b4daeb5a8024a3d98886e".
-
- Giovanni Manghi wrote:
> confirmed here: Segmentation fault
Everything works here!
Debian/wheezy
QGIS code revision... -
- confirmed here: Segmentation fault
does not seems to happen on latest qgis/master/osgeo4w -
07:13 AM Bug report #5355 (Closed): Opening dialog "configure shortcuts" crashes qgis
- Opening the dialog "configure shortcuts" from menu settings crashes qgis.
1. Open Qgis
2. go to settings->configure ... -
- Hi, is this a QGIS issue or an ogr one?
-
- When importing a kml vector layer, the parser only recognizes the first of multiple linear rings nested within a sing...
-
- Fixed in changeset commit:"71c4c7f8ce9d26b66159e849c5e96aef3ab5e802".
-
- Having a semi-transparent color for selection (by default) seems like a good idea.
But using transparency for fill c... -
- Alexander Bruy wrote:
> I tried to implement this, look at branch "raster_settings":https://github.com/alexbruy/Quant... -
- Here's the gory details.
The crash trace ends a little different this time, and I didn't see the list of available l... -
- Here's the gory details.
The crash trace ends a little different this time, and I didn't see the list of available l... -
> Giovanni and/or Marco: If you are at the Lyon code sprint and the weather is as dreary as it is here in Modena th...-
04:54 AM Bug report #5338: QGIS master crashes adding a WFS layer on OsX Snow Leopard
- William, I have no Mac platform upon which to test and I cannot reproduce the problem you report running Qgis-master ...
-
- When adding the scalebar the item properties shows strange numbers in the first two parameters.
-
- You can do it by creating 2 symbol layers, 1 for the fill without outline (Simple fill with no pen) and the other one...
2012-04-13
-
- I tried to implement this, look at branch "raster_settings":https://github.com/alexbruy/Quantum-GIS/tree/raster_setti...
-
- Duplicate of #4434.
It is a bug when using the unity desktop manager. As worksround, to access project properties cl... -
- Duplicate of #4434.
It is a bug when using the unity desktop manager. As worksround, to access project properties cl... -
04:56 PM Bug report #5352 (Closed): Missing Project Properties
- I'm using QuantumGIS 1.9.0 Master under Ubuntu 12.04, after several updates I realized that I no longer can find Proj...
-
- SCALE parameter introduced in commit 7f295723fd9dcba5e42e690d63bf2d4b8cf84d66
-
05:07 AM Feature request #5349 (Closed): Add SCALE to GetLegendGraphic
- Implementing SCALE parameter in GetLegendGraphic
-
- Applied in commit a5b3a49bca48b15abd433cfff74cc165f4bbc308
-
- Testing if alias value is not empty before setting attributeName in GetFeatureInfo
-
- Fixed in changeset commit:"f9e2df427501f43fefe6d05445fca44bab61a014".
2012-04-12
-
01:53 AM Feature request #5346 (Closed): Have layer or rule base class greyed out when not visible due to ...
- It would be nice if layer title or icon could show display status of a layer.
It could be greyed out and Italic, or ... -
- On linux it doesn't change the preview, but the square symbol is applied anyway.
-
- Title says it all.
-
12:37 AM Bug report #5345 (Closed): Problems with PATH-Variables in msys.bat and OSGeo4W
- Under Windows-OS the batch files "msys.bat" and "OSGeo4W.bat" experience problems when path-variables to executables ...
-
- Feature id in QGIS can only be 64 bit in size. The SQL uniqueidentifier type (which is 16 bytes) not sufficient for t...
-
- Fixed in changeset commit:"be8f135abb8d1280738b7c672bbd8d804243f02c".
-
- Fixed in changeset commit:"be8f135abb8d1280738b7c672bbd8d804243f02c".
2012-04-11
-
01:30 AM Bug report #4011: Map canvas flickers when content is dragged
- Im adding a video comparing the rendering between QGIS, SAGA GIS and Udig.
I think the rendering in Udig is by far ... -
- I added as watchers both Marco and Bill because they worked on the wfs client lately.
-
- OK, I can confirm that on even current master and release-1_8 WFS crashes, and on OS X Lion. Similar trace, slight d...
-
- OK, I can confirm that on even current master and release-1_8 WFS crashes, and on OS X Lion. Similar trace, slight d...
-
- William Kyngesburye wrote:
> Odd, your crash report showed it using GDAL 1.8, and the 3/11 dev build uses with GDAL 1... -
- Odd, your crash report showed it using GDAL 1.8, and the 3/11 dev build uses with GDAL 1.9.
... a closer look at the... -
- William Kyngesburye wrote:
> Are you sure you have my most recent dev build from 3/11? I can (and should) also make ... -
- Are you sure you have my most recent dev build from 3/11? I can (and should) also make a new one.
-
- Duplicate #5182
-
- Duplicate #5182
-
11:02 PM Bug report #5343 (Closed): Merge shapefiles error
- When trying t merge shapefiles I get following error:
An error has occured while executing Python code:
Traceback (... -
- Also in qgslabel.cpp - see attached patch. Confirmed that these issues cause similar problems on Linux/ARM.
-
12:32 PM Bug report #4050: GPSD Server WATCH request
- Since last spring I have used gpsd: 2.96 (revision 2011-12-02T19:52:26) with qgis on OpenSuSE with current qgis versi...
-
- Subject says it all. Is a common tool in other GIS packages.
-
- I agree very much with both requests.
-
- There is an option to limit the rows in the attribute table to objects within the canvas. I find it very useful! Howe...
-
- Probably related to #5255
-
08:05 AM Bug report #5340 (Closed): QGIS loses non-latin letters in new shapefiles
- Some of the recent changes have introduced attribute data loss for new shapefiles. Still present in 67c77e5
Steps to... -
- Subject says it all. I may be wrong but I don't think that it is possible to do it at the moment.
-
- Alright, I did hit one of those drawbacks pretty easily :)
That was: ST_Intersection returns a geometry of a differen... -
- I'm still using 1.7 and this remains the most hit issue I have. Your commit cherry-picks cleanly in 1.7, I'm giving i...
-
- I'm still using 1.7 and this remains the most hit issue I have. Your commit cherry-picks cleanly in 1.7, I'm giving i...
-
- I'm still using 1.7 and this remains the most hit issue I have. Your commit cherry-picks cleanly in 1.7, I'm giving i...
-
- I'm still using 1.7 and this remains the most hit issue I have. Your commit cherry-picks cleanly in 1.7, I'm giving i...
-
- works fine also on Windows now
-
- works fine also on Windows now
-
- alobo - wrote:
> Union should have an option to integrate those fields with the same name
> in the new table (i.e., a...
2012-04-10
-
- William Kyngesburye wrote:
> Do you get a crash report? What's it say?
attached -
- Do you get a crash report? What's it say?
-
- subject says it all (error message is seg fault). Using William Kyngesburye packages.
-
- Union should have an option to integrate those fields with the same name
in the new table (i.e., an option to do what... -
- Union should have an option to integrate those fields with the same name
in the new table (i.e., an option to do what... -
- Union should have an option to integrate those fields with the same name
in the new table (i.e., an option to do what... -
07:47 AM Bug report #5327: Nodetool partially broken on qgis-master
- I can confirm too using windows 7 master.
I have also noticed that if you select several nodes at once and try to de... -
- Also I can confirm the issue to polygon feature!...
-
- This also happens on Windows 7, current Master.
-
- I noticed that 3D Shapefile works fine, the issue occur when input file is of type MULTI-geometry!
the attached samp... -
- I noticed that 3D Shapefile works fine, the issue occur when input file is of type MULTI-geometry!
the attached samp... -
> Have I not rights to do that?
try now (logout and login again)-
- Giovanni Manghi wrote:
> please then change the title/details accordingly
Giovanni, I can not edit the ticket, unfor... -
- Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > if the issue is a higher level we should change the title of the... -
- cremat0rio - wrote:
> Going to Labeling -> Advanced -> Placement, there are various options.
> "Horizontal" specifica... -
- cremat0rio - wrote:
> Going to Labeling -> Advanced -> Placement, there are various options.
> "Horizontal" specifica... -
- Nathan, I added you as watcher to this ticket as you worked in the field calculator. Not sure if you want/can do some...
-
- Salvatore Larosa wrote:
> I did some tests in more detail and I noticed that sometimes QGIS crashes!
> It is very dif... -
> Why should anybody unset a band? Any reason?
maybe it does not make sense, but if it is possible to do that (unse...-
- James Stott wrote:
> I get the issue on both Ubuntu and Windows.
>
> Also, if I have 3 layers in my map and they are... -
- James Stott wrote:
> confirmed on Windows 7 64 bit and Ubuntu.
this is fixed, did you updated to the latest build?
2012-04-09
-
- I get the issue on both Ubuntu and Windows.
Also, if I have 3 layers in my map and they are all turned off, then sel... -
- confirmed on Windows 7 64 bit and Ubuntu.
-
- fixed in commit:30eaf192e731aeaa74780123ada445bfda971737
-
- fixed in commit:30eaf192e731aeaa74780123ada445bfda971737
-
05:14 PM Bug report #5252 (Reopened): MSSQL Estimated table parameter is not used
- Hi Tamas,
I just re-tested this and it still seems that the estimated metadata parameter is not being used correctly... -
- Hi Tamas,
I just re-tested this and it still seems that the estimated metadata parameter is not being used correctly... -
- Is it still valid?
Are you able to build QGis 1.8 (or the latest 1.7.x) on your OpenBSD? Does the build fail with "e... -
- Is it still valid?
Are you able to build QGis 1.8 (or the latest 1.7.x) on your OpenBSD? Does the build fail with "e... -
- Is it still valid?
Are you able to build QGis 1.8 (or the latest 1.7.x) on your OpenBSD? Does the build fail with "e... -
- Is it still valid?
Are you able to build QGis 1.8 (or the latest 1.7.x) on your OpenBSD? Does the build fail with "e... -
- The fix seems already present in branch 1.8.
-
- The fix seems already present in branch 1.8.
-
- Giovanni Manghi wrote:
> Then I would say to don't allow unselect a band
Why should anybody unset a band? Any reason?
-
- It was fixed in commit:337eec35fa
-
- It was fixed in commit:337eec35fa
-
- Giovanni Manghi wrote:
> if the issue is a higher level we should change the title of the ticket
IMHO, it does not d... -
- Paolo Cavallini wrote:
> Also the count is broken here, possibly because of the same issue (it always returns 0).
if... -
- Actually, it's a problem of the field type:
If Precision = 0, even if field type has been set to Float
the result is... -
- I can confirm this issue, it can indeed lead to further errors.
-
- I did some tests in more detail and I noticed that sometimes QGIS crashes!
It is very difficult to reproduce!
When i... -
- Alexander Bruy wrote:
> Weird, still works for me. I tried several times with different vectors.
The same for me, no... -
- Weird, still works for me. I tried several times with different vectors.
-
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > Alexander Bruy wrote:
> > > Maybe it crashes when this fields cr... -
- Giovanni Manghi wrote:
> Alexander Bruy wrote:
> > Maybe it crashes when this fields created by user and have differ... -
- Alexander Bruy wrote:
> Maybe it crashes when this fields created by user and have different data type?
no, it cras... -
- Tested under 32-bit Slackware and QGIS master commit:d1a11bec96 and it works fine with both options (create new layer...
-
- ...
-
01:13 PM Bug report #5336 (Closed): SREF98 projection isnt listed in qgis 1.7.4
- In QGIS 1.7.4 projection SREF98 (EPSG code(s) 4073-4075) is not listed. GDAl version 1.9.0. Installed ftom osgeo4w.
... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"95045f86f71b8b102a5301bb44be0f33304ad966".
Thanks! -
- Fixed in changeset commit:"95045f86f71b8b102a5301bb44be0f33304ad966".
-
- I confirm the issue on Linux and also on Windows.
On Windows/master/osgeo4w is even worst, as it is just enough to s... -
- I confirm the issue on Linux and also on Windows.
On Windows/master/osgeo4w is even worst, as it is just enough to s... -
- I confirm the issue on Linux and also on Windows.
On Windows/master/osgeo4w is even worst, as it is just enough to s... -
10:09 AM Feature request #5319: Performance issues with new symbology and levels
- Going to Labeling -> Advanced -> Placement, there are various options.
"Horizontal" specifically states "slow".
So th... -
- cremat0rio - wrote:
> Sorry, there's no issue.
> Horizontal placement, in "Layer labeling settings", was inadvertentl... -
- Sorry, there's no issue.
Horizontal placement, in "Layer labeling settings", was inadvertently selected.
Sorry.
-
- As for the original description this is duplicate of #4955
-
- As for the original description this is duplicate of #4955
-
- alobo - wrote:
> (but R is much faster than QGIS, few seconds
> against few minutes
counts made with the field cal... -
- Update to issue 2: clarified thanks to Roger Bivand, no need to open another
ticket, QGIS, postgis, and R are coincid... -
- alobo - wrote:
> ok, it seems there are 2 issues here:
> 1. The wrong results I get with
> vector/Geometry Tools/Expo... -
- ok, it seems there are 2 issues here:
1. The wrong results I get with
vector/Geometry Tools/Export/Add Geometry Colum... -
> the same values are computed by postgis.
so I would try to understand why values computed with R are different an...-
- Giovanni Manghi wrote:
> After all the two issues are not that unrelated.
>
> If you compute areas with the field ca... -
- After all the two issues are not that unrelated.
If you compute areas with the field calculator in a enough wide fie... -
- After all the two issues are not that unrelated.
If you compute areas with the field calculator in a enough wide fie... -
- After all the two issues are not that unrelated.
If you compute areas with the field calculator in a enough wide fie... -
- I don't think that this is related to #4955 because that issue is different: if the column is not wide enough the val...
-
- Tomas Vrana wrote:
> This patch actually broke my gpsd support. Reverting the patch fixed the problem.
so this means... -
- Tomas Vrana wrote:
> This patch actually broke my gpsd support. Reverting the patch fixed the problem.
so this means... -
- Tomas Vrana wrote:
> This patch actually broke my gpsd support. Reverting the patch fixed the problem.
so this means... -
- SPIT is not maintained and it will be discontinued/removed when DB Manager will allow multiple shape upload. I think ...
-
- It still doesn't work on Windows/master/osgeo4w, but I'm not sure if the Windows build is up to date as the Ubuntu/ni...
-
- It still doesn't work on Windows/master/osgeo4w, but I'm not sure if the Windows build is up to date as the Ubuntu/ni...
-
- Alexander Bruy wrote:
> Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
It still doesn't work ... -
- Alexander Bruy wrote:
> Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
It still doesn't work ... -
- Alexander Bruy wrote:
> Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
It still doesn't work ... -
- Alexander Bruy wrote:
> Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
It still doesn't work ...
2012-04-08
-
- See also:
http://smathermather.wordpress.com/2011/12/01/gdal_calc-py-raster-calculator-using-numby-functions/ -
- Also the count is broken here, possibly because of the same issue (it always returns 0).
-
- Would be good to have support to show non geometry tables in the browser dock.
-
- I confirm, but only on field [code_two]!
Columns with values equal at 0 not seem be affects!
this is what I get in t... -
09:52 AM Bug report #5333 (Closed): QGis crashes if you use "pretty breaks" on a column with the same valu...
- QGis crashes if you use "Pretty Breaks" on a column with the same value for every row
_Fatal: ASSERT: "!isEmpty()" in... -
- Fixed in commit commit:30eaf19!
I can confirm on Linux! -
- I read #3742 and I agree that can make sense from the technical point of view, but from the user point of view it is ...
-
- Just installed from the nightly build repo and also recompiled and the issue is gone...
-
- Just installed from the nightly build repo and also recompiled and the issue is gone...
-
- Results for large polygons are wrong when calculated with vector/Geometry Tools/Export/Add Geometry Columns
Example i...
2012-04-07
-
- This patch actually broke my gpsd support. Reverting the patch fixed the problem.
-
- Fixed in changeset commit:"59a08c41096a507d3a29bf82079766a62f12c94f".
-
- On OS X, clang does not have the -fpermissive flag. This was added to SIP flags in commit:893f305c51.
No compile er... -
- Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
-
- Fixed in changeset commit:"a82a2438e1b9bb4656d2a63ef21800d1d2a01ff2".
-
- I suspect so
-
- Nathan Woodrow wrote:
> I found what has caused this. Tim made a commit that added layersAdded and layersRemoved to ... -
- I found what has caused this. Tim made a commit that added layersAdded and layersRemoved to the MapLayerRegistry whi...
2012-04-06
-
- Thank you for clarifying further. I guess we can close this ticket.
-
05:49 AM Bug report #5330 (Closed): Join: Null data handling different for a joint column than for a norma...
- Using the attached data (data is from GADM, I hope using it here does not violate redissemination rules...):
* Load ... -
- Fixed in commit:55d92681d7eef2
Thanks -
- Fixed in commit:55d92681d7eef2
Thanks -
- In Qgis the semi-minor axis of the ellipsoid is calculated [1] with:
b = a - (f/a)
where
b = semi-minor axis
a = se...
2012-04-05
-
01:00 AM Bug report #5274: QGIS rebuild really necessary for new GRASS release?
- Jef is right. We cannot get around it without some terrible hack, like checking version of installed GRASS and then c...
-
- I think you both are right. jef technically, Giovanni from user viewpoint. But the 'confusion' comes from the fact th...
-
- I'll tag this as feedback for myself, to remember me to leave feedback or close after studying the other ticket.
-
> The project CRS defines which CRS the canvas shows - but only if OTFR is on. Otherwise it's not used, IOW meaning...-
- Giovanni Manghi wrote:
> > Without OTFR the project CRS is meaningless
> sorry, I don't understand this statement
... -
- Hi Jurgen
Jürgen Fischer wrote:
> Without OTFR the project CRS is meaningless
sorry, I don't understand this statem... -
- Without OTFR the project CRS is meaningless and without any layers there nothing else and WGS84 is just the default C...
-
- Tested on QGIS master on both Linux and Windows.
Richard, I'll give the ticket to you because if I'm not wrong you ... -
- If I use the SPIT plugin to import polygon features in PostGIS I get this:...
-
12:13 PM Bug report #5327 (Closed): Nodetool partially broken on qgis-master
- in this video, strange behavior nodetool: http://youtu.be/Z4cUn3-xx6E...
-
- Marco and nirvn, if you have still evidence of this issue please reopen.
-
- Marco and nirvn, if you have still evidence of this issue please reopen.
-
12:10 PM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
- This seems to have resolved itself. I tried logging in with Unity2D rather than normal Unity and QGIS worked. Then ...
-
- I tested packages of self compiled qgis-master from 3/4 days ago and it works as expected.
-
- I confirm this "erratic" behaviour also on Windows/osgeo4w.
-
- Just installed/updated qgis-master on two Ubuntu 11.10 machines.
When adding a WMS layer it doesn't show anymore how... -
- Tested on QGIS master on both Windows and Linux (with vectors).
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- If I select multiple layers in layer control, it will not turn them all off. It seems to be unpredictable as to which...
-
- Confirmed also on linux. No layers do show in the "snapping options" dialog.
-
- Confirmed also on linux. No layers do show in the "snapping options" dialog.
-
- Confirmed also on linux. No layers do show in the "snapping options" dialog.
-
- Confirmed also on linux. No layers do show in the "snapping options" dialog.
-
- When accessing the snapping options menu, the vector layers from the project are not shown in the dialog so I cannot ...
-
-
- partially answering to myself , ogr does support odbc SQLTables() : [http://www.osgeo.org/pipermail/gdal-dev/2009-Oct...
-
- I forgot to check "causes crach" checkbox.. Not true, but freezes Qgis until OGR as read every single line in all dat...
-
- Hi all,
odbc interface in QGis does "SELECT * from mytable" for *ALL* tables when trying to collect table list, jus... -
- The problem comes from a column in uniqueIdentifier. The only format for the key seems to be integer.
-
06:13 AM Feature request #4124: Add support for wfs 1.1.0
- Some work seems to have happened in trunk, but WFS 1.1.0 layers still don't display.
e.g. http://data.wien.gv.at/dat... -
- Some work seems to have happened in trunk, but WFS 1.1.0 layers still don't display.
e.g. http://data.wien.gv.at/dat... -
05:11 AM Bug report #5321 (Closed): Inserting geometries using a WFS-T of ArcGIS Server
- If point geometries are inserted, which results in an error: "Error: An object is not inserted"
*Error response:*
<ow... -
- sorry I didn't see that #3388 was already closed. Anyway you will need to provide sample data and further information...
-
- sorry I didn't see that #3388 was already closed. Anyway you will need to provide sample data and further information...
-
- duplicate of #3388
-
- duplicate of #3388
-
- I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbology with levels, QGis gets... -
> QGis gets very slow and only uses one thread (it seems so), wich is strange nowadays with multicore processors.
f...-
- I have the same problem.
I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbolog... -
- I have the same problem.
I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbolog... -
03:16 AM Bug report #5133: Error in high resolution exports with transparent rasters
- I haven't test on win XP with v1.7.4. I prefer you wait (as soon as possible).
Thx -
- Alexis Viaud wrote:
> Up!
> The new LTS version is the 1.7.4. Tested on ubuntu 10.10 pc64 it work. No line of pixels ... -
- Up!
The new LTS version is the 1.7.4. Tested on ubuntu 10.10 pc64 it work. No line of pixels anymore, but still betwe... -
- The provider should return the default value for a column using QgsVectorDataProvider::defaultValue(int).
See Postgr... -
- Even I guess this is an error in the vector provider.
I tested the operation in other GIS software and the result is ...
2012-04-04
-
- Thanks Bill!
-
- Thanks Bill!
-
- This error was introduced by the patch for bug 4604, which sends a DescribeFeatureType request that contains extraneo...
-
- Probably the problem lies in the vector provider
-
- Alexander Bruy wrote:
> Not sure that this is fTools problem. As I said before, Field Calculator (core functionality)... -
- Not sure that this is fTools problem. As I said before, Field Calculator (core functionality) also don't work with su...
-
- fixed in commit:25988d67
-
- fixed in commit:25988d67
-
- Fixed in changeset commit:4a9e8ccb862225b73b89297d6467caf9f1bc0789.
-
- Fixed in changeset commit:4a9e8ccb862225b73b89297d6467caf9f1bc0789.
-
- Fixed in https://github.com/szekerest/Quantum-GIS/commit/4fea2c7047cc4fbf0ce5a4da37e584de3dedd511
-
- Fixed in changeset commit:"4a9e8ccb862225b73b89297d6467caf9f1bc0789".
-
- Fixed in https://github.com/szekerest/Quantum-GIS/commit/4fea2c7047cc4fbf0ce5a4da37e584de3dedd511
-
- I guess a useful enhancement could be the option for the layers in the properties to choose the coordinate of the
ge... -
- A really useful enhancement for qgis (and obviously qgis-server)
could be the capability to define an "Acetate Layer"... -
- "-s Smooth corners of area features"
-
- The native GRASS gui/module allows it and the elevation maps can be viewed at the same time in the nviz interface.
-
- it returns interesting/useful infos on raster maps
-
- Subject says it all. Without this option the module is useless.
-
- Tested with the coordinate capture point tool, on both Windows and Linux. In the similar r.los module pasting the coo...
-
- See the attached image. Does not happen for point symbols. Tested on master.
-
- Google layers plugin is a 3rd party one (so in any case you be needed to file a ticket in the proper section of the b...
-
- Google layers plugin is a 3rd party one (so in any case you be needed to file a ticket in the proper section of the b...
-
09:22 AM Bug report #5304 (Rejected): Google layers plugin won't load
- I updated to 1.7.4 and the first time I ran it gave me the following error (see screen shot).
-
- Using the new SQL server provider with geometry table, it's not possible to have the attribut datas in the window 'at...
-
- The new provider is able to adress geometry Sql server 2008 tables.
No features is loaded when we try to use geograph... -
- I withdraw my comment: the problem with the 0,0 range resulting
from applying the STD option is not related to the nu... -
- According to what I'm seeing, is not only that the "save" (disquette) button is not
present for single band raster la... -
- fixed with the same fix for #5013
-
- fixed with the same fix for #5013
-
02:47 AM Feature request #5301 (Closed): Save as image do not export text annotations
- When you use "Save as Image" dialog to export your map as an image file, text annotations are not incorporated in the...
2012-04-03
-
08:37 PM Bug report #5257: fTools 'Define current projection' problem
- Confirmed (Fedora 14 x 64 / 1.9.90-Alpha, 927dcbd). The configuration files were removed before opening QGIS (~/.qgis...
-
- Confirmed here, current trunk on debian testing
-
- Jürgen Fischer wrote:
> But that might also be an issue for different versions of gcc on Linux - waiting for the nigh... -
- The project file loading optimization was not working anymore. I suppose commit c0b720805b5f21b4fc8cb108682b8e8a325e4...
-
-
10:42 AM Bug report #5285: NoData value should not be considered when classifying a raster
- You're right, sorry 'bout that. I evidently don't have permission to close it, can someone go ahead and do that?
-
- probably duplicate of #1380. Please check and confirm.
-
- The file comes from a geoMedia export, so this may be the root of the problem.
-
- Apparently, the error occurs when the SHP is 3D MultiPoint.
If you convert SHP geometries from 3DMultiPoint to Point,... -
- Field Calculator also can't create columns with X and Y for this dataset
-
- Add geometry columns command does not work, as it returns two columns filled with 0s. See attached sample.
2012-04-02
-
- William Kyngesburye wrote:
> That --no-undefined flag is causing trouble. The OS X ld does not have that option (OSX... -
- That --no-undefined flag is causing trouble. The OS X ld does not have that option (OSX ld is a custom job), but it ...
-
- does commit:9e57e20f61d help on OSX?
-
- Fixed in changeset commit:"9e57e20f61d025132f5b44f60a892e7263043661".
-
- Hi,
I renamed .qgis folder but never has changed. I think the problem is not depending on some plugin.
Under Qgis 1.7... -
> Perhaps some other conditions or global setting on qgis to do it ?
please check if there is any 3rd party plugin ...-
- When classifying a raster or when calculating min and max, the NoData value (on the transparency tab) should be ignor...
-
- If you are saving a feature and the database fails to insert due to a SQL error the feature will disappear with no er...
-
- When using a table with a date field, trying to save the record back the feature is removed from the map canvas and t...
-
04:42 PM Bug report #5282: crssync not executed in debian postinst nor when "make install" is run
- Jurgen - thanks
please consider this patch which adds CRS_SYNC[=TRUE] option. After installing *.db files, crssync i... -
- - call in postinst added in commit:1011198 and commit:520e488.
- AFAIK there won't be another release of 1.7
- only r... -
- - call in postinst added in commit:1011198 and commit:520e488.
- AFAIK there won't be another release of 1.7
- only r... -
- the new crssync utility is not run in key moments - debian installs and 'make install'. It is important that it be ex...
-
- Marco Hugentobler wrote:
> This is probably related to the optimizations I did about a month ago (speed up of loading... -
- Fix ok!
Thanks! -
- Should be fixed in master 9e15906f063a4947324b68c94ff65e1e9c4e05c1. Please test and reopen if not.
-
- This is probably related to the optimizations I did about a month ago (speed up of loading projects).
-
- gespiel - wrote:
> Hello,
>
> in the OSGeo4W online installer under libs, version 3.2.1 is shown as installed.
> QGI... -
Hello,
in the OSGeo4W online installer under libs, version 3.2.1 is shown as installed.
QGIS-Master reports under "...-
- Jürgen Fischer wrote:
> a bit vague. Did you check that the source and destination CRSes are picked up correctly?
H... -
08:25 AM Bug report #5257: fTools 'Define current projection' problem
- Giovanni Manghi wrote:
> > Well, this error occurred in several new and clean installations of QGIS 1.7.4 in windows ... -
> Well, this error occurred in several new and clean installations of QGIS 1.7.4 in windows computers.
it depends o...-
- Giovanni Manghi wrote:
> I have noticed that sometimes some old "configuration" of ftools remain stored in the .qgis ... -
- I have noticed that sometimes some old "configuration" of ftools remain stored in the .qgis folder, and removing it m...
-
- elcuco - wrote:
> Here it goes the shapefile that i'm trying to get fTools 'Define current projection' to work. The ... -
- Here it goes the shapefile that i'm trying to get fTools 'Define current projection' to work. The CRS that I whant i...
-
- Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
Not reproducible here with lat... -
- Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
can you please attach a sample... -
- Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
can you please attach a sample... -
- This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
-
05:43 AM Bug report #5259: moving polygon individual nodes broken in qgis master, end up moving two nodes ...
- Confirmed! And same laziness here....
In the same vein, still in "node tool" mode, click on the polygon to select it...
2012-04-01
-
- See the WPS client plugin
-
- fixed in commit:c29fb5a and commit:8ae7651
-
- fixed in commit:c29fb5a and commit:8ae7651
-
- Thanks. Can this stuff be backported to 1.8?
-
- Fixed in changeset commit:"51011559c4d7cdb5a11e50cae23a20b688df2b77".
-
- Fixed in [email protected]:szekerest/Quantum-GIS.git
-
- Fixed in changeset commit:"51011559c4d7cdb5a11e50cae23a20b688df2b77".
-
- Fixed in [email protected]:szekerest/Quantum-GIS.git
-
- Hi,
actually the transparency il allowed to set in the main layer propertier for all the layer.
This chhose is ok whe... -
- I try using the
qgis-dev commit:157541e (01/04/2012)
(very nice the
Using the shapefile given opening the propertie...
2012-03-31
-
- step 1: load data with legend loaded as default in QGIS Master
step2: open properties dialog for layer RU_st018poly
s... -
- cannot replicate here, can you please attach sample data and exact steps? thanks.
-
- Attemping to access to symbol level dialog from layer properties of a polygon shape layer causes QGIS crash.
-
07:24 PM Bug report #5183: Scale bar has wrong units for GeoJSON layer
- This is not a bug--please close. Layers must be transformed/reprojected via Layer:Save As...
Adding this note as an... -
- The GRASS library checks itself. It probably has good reason not to trust its own ABI.
-
- I shipped a version of QGIS, that was built using GRASS 6.4.1. After updating to GRASS 6.4.2 without rebuilding QGIS,...
-
- James Perrins wrote:
> I don't think the join makes it non unique - as I say - it definitely works in map server - wo... -
- Trunk doesn't build with gcc 4.7, but builds with 4.6.
In the first case it complains:
/builddir/build/BUILD/qgis-1... -
04:15 AM Bug report #5264: Spatialite Provider / fTools Select by Location does not find intersections
- I've uploaded a project for others to test.
2012-03-30
-
- Etienne Tourigny wrote:
> The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not ap... -
- Etienne Tourigny wrote:
> The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not ap... -
- The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not apply).
crssync must be cal... -
- There is a problem in Master with the queries for the crs lookup, they return the deprecated value first, so that one...
-
- ouch, 4355 is the attachment number of the patch to #4977 - so the association with this ticket is wrong.
-
-
01:43 PM Feature request #4355 (Closed): Performing deletion on layer with feature counts turned on should...
-
01:49 PM Bug report #5239: TIN interpolation causes crash
- Hi,
could anybody check this solution?
I think it was a numerical problem. The value of the leftOfTresh was too smal... -
- Hi,
could anybody check this solution?
I think it was a numerical problem. The value of the leftOfTresh was too smal... -
- Confirmed (on Linux). Joined text field (tested with a csv) are truncated at 80 chars when (re)saving the shapefile.
-
- Confirmed (on Linux). Joined text field (tested with a csv) are truncated at 80 chars when (re)saving the shapefile.
-
- I tried to join a field that had cells with up to 220 characters to a shapefile. However when I saved the new shapefi...
-
- I confirm that the issue still persists!
-
- Hi all,
my admin sys asks me to deport .qgis under Application Data to comply with Windows profile replication tools... -
03:53 AM Bug report #5235: Link to SQL server spatial view fails
- I don't think the join makes it non unique - as I say - it definitely works in map server - wouldn't that have the sa...
-
- Are you sure the left outer join on the view definition doesn't affect the uniqueness of the MI_PRINX column?
If you ... -
- OK - a bit more...
This view works:
SELECT SiteCode, Geom AS MyGeom, MI_PRINX
FROM dbo.SitesGeom
In my... -
- James Perrins wrote:
> Yes - unique integer field is present.
>
> Same view works well in your mapserver sql2008 plu... -
02:48 AM Bug report #5102: query ["field" != 'NULL'] works while ["field" = 'NULL'] doesn't
- Hi
in my case (qgis 1.7.4.5 8058b22) I was trying to select non null features, values coming from a joined table fiel... -
- fTools 'Select by Location' tool does not find intersecting geometry when using a Spatialite Layer.
Tested working f...
2012-03-29
-
- Yes - unique integer field is present.
Same view works well in your mapserver sql2008 plugin
CREATE TABLE [dbo].[... -
- How to replicate:
Open QGIS (keep default CRS, WGS84 LatLon)
Open Georeferencer (Raster|Georeferencer)
Load an image ... -
09:27 PM Bug report #5259 (Closed): moving polygon individual nodes broken in qgis master, end up moving t...
- Simple steps to reproduce the "disease":
1/ open qgis
2/ create a new (shapefile) vector layer
3/ switch the vector l... -
- Alexander Bruy wrote:
> Ok, but IMHO this is not an fTools issue. As I can see crash occurred during initialization o... -
- Ok, but IMHO this is not an fTools issue. As I can see crash occurred during initialization of QgsVectorLayer object
-
- Alexander Bruy wrote:
> So I think we can close this ticket and maybe open another about restoring previous default s... -
07:55 AM Bug report #5251: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
- When you choose the whole directory (default) the CRS selector dialog popups well for each shapefile in the directory...
-
- Well, the problem is not in Merge shapefiles to one. And not in the lack of .prj file (at least this is not main issu...
-
- Fixed in changeset commit:"2abd900ed6f73d93866283c9c3dce191d451a686".
-
- Hi,
In QGIS 1.7.4, after I loaded a shapefile without a .prj file, I tried to use the fTools 'Define current projecti... -
- Partly fixed with commit:287bebe961a9a0a91781a0cf4f7b4a034f75edc4
Thanks Radim. -
- I have a WMS server that is changing its data on an hourly basis and I'd like to always know what data is being shown...
-
- I think the patch should work, but I have no way to verify this.
Does anyone can help with verification? -
- See also #4634
-
- In QGIS Core I find code looks like this:
http://pastebin.com/qRcAa9GC
I think it code must be
http://pastebin.com/k... -
- See also #5256
-
- This is because 1.7.4 and master now compiled against GDAL 1.9.0.
-
03:09 AM Bug report #5255 (Closed): Wrong codepage of shapefile
- When opening shapefiles, it doesn't matters what codepage You choose, it is always UTF-8 in QGIS 1.74, so polish lett...
2012-03-28
-
- Currently, 3D GRASS vectors cannot be loaded in QGIS. It would be useful to add a support to it, even if the results ...
-
12:31 AM Bug report #5253 (Closed): labels min scale and max scale display
- On shp layers, i setup the scale for label displaying.
It works, so i save my project
I quit the project, I quit Qg... -
- FYI, I'm seeing the same crash as described by Marco on a 32-bit machine using the master ppa build.
-
- When loading the "Add MS Tables(s)" Dialog and connecting to a MSSQL database, determining the geometry type is very ...
-
- HI Tamas,
Thanks for the fix on the PK.
I still seems to be having problem with this linestring dataset (http://cre... -
- HI Tamas,
Thanks for the fix on the PK.
I still seems to be having problem with this linestring dataset (http://cre... -
- should be working for now
-
- should be working for now
-
- Yes, it worked well for me too after setting the projection
-
- The cause can be the lack of .prj files. I tested on Windows and it crashed at the first attempt, then I fixed the sh...
-
- Using master installed following https://issues.qgis.org/projects/quantum-gis/wiki/Download
Platform and platform ver... -
- I can perform the operation you show in the video without any major issue, also selecting many features at one time. ...
-
02:53 AM Bug report #5243: Shapefile - merging cause crashes in 1.7.4
- The sample data are in the ticket (https://issues.qgis.org/attachments/4348/shapefiles_merge_crashes.zip). That's my ...
-
- Gerald Fringeli wrote:
> This video shows a crash after a merging of 2 features.
> NB: In the video, qgis seems to re... -
- This video shows a crash after a merging of 2 features.
NB: In the video, qgis seems to remain open, in reality it cl... -
- Hi,
When we want to make a legend of a graduated or categorized vector, we choose the option Graduated or Categorized... -
- Several times I have created a new *Point* layer (after setting 10 attributes) while what I wanted was to create a *P...
-
07:39 AM Feature request #5248 (Closed): Blending modes (composition modes)
- It would be a great addition to add blending modes for colors/layers. Blending modes such as multiply, color dodge, e...
-
07:14 AM Bug report #4945: Missing Krovak East North 102067 projection
- I can confirm this for the version 1.7.4. It is a serious issue since it is not possible to force custom projections ...
-
-
- James Perrins wrote:
> Same error with your latest build I'm afraid
Do you have an integer column with unique values... -
- Giovanni Manghi wrote:
> I can replicate the issue also with the standalone version, but not with a simple project ma...
2012-03-27
-
- I can replicate the issue also with the standalone version, but not with a simple project made of one or few layers. ...
-
- It happens only on 1.7.4/osgeo4w, not with the standalone nor with master/osgeo4w.
Add a vector and set the project ... -
- As it is now in both master and 1.7.4 if a project is saved with unchecked WFS layers, those are loaded anyway when t...
-
> One quick question before I close out the ticket (or should I move it elsewhere?). I have never used GRASS but it ...-
> One quick question before I close out the ticket (or should I move it elsewhere?). I have never used GRASS but it ...-
03:57 PM Bug report #5223: ftools Intersection fails to gathering all shapes
- Thank you Giovanni. I just created a ticket http://trac.osgeo.org/geos/ticket/521 on the GEO web site. I hope I put ...
-
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Same error with your latest build I'm afraid
-
- James Perrins wrote:
> I can try - is there a Windows build in there somewhere - or is it just source ?
>
> In which... -
- I can try - is there a Windows build in there somewhere - or is it just source ?
In which case presumably I need to ... -
- James Perrins wrote:
> A bit more information - hope this helps:
>
> OK - I set up a really simple view - I have a t... -
- A bit more information - hope this helps:
OK - I set up a really simple view - I have a table SitesGeom that is disp... -
- The error message should have of course been:
dbname='CMSI' host=JAMESP-THINK srid=27700 type=POLYGON table="dbo"."v... -
- Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated.
-
- Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated.
-
- Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated.
-
02:06 PM Bug report #2790: Python error moving nodes with OSM plugin
- Seems worse with 1.7.4, at least I can do some editing with 1.7.1. Both from Fedora rpms.
-
- Seems worse with 1.7.4, at least I can do some editing with 1.7.1. Both from Fedora rpms.
-
- As far as expression uses 3 logic states (true, false, null) the only way to print strings concatenated to a field is...
-
- Hi, in the zip file there is only ONE shape.
-
- Hi, in the zip file there is only ONE shape.
-
- Hi, in the zip file there is only ONE shape.
-
- Crash when merging polygons. No warnings, no error message. The first mergers do not cause crashes. This only happens...
-
06:02 AM Feature request #5242 (Closed): Open KMZ without needing to unzip
- It would be awfully nice if we could import KMZ files directly, without needing to unzip and import the KML files.
-
-
03:44 AM Bug report #4567: Ftools - Union returns Wrong Table of Attributes
- I try to reinstall and update Qgis, both 1.7.4 and 1.9.90, and the problem presisted.
I uninstalled QGIS completly, ...
2012-03-26
-
- It may well work out of the box. It has to be checked when GRASS7 hits major distros.
-
- http://pvanb.wordpress.com/2012/03/21/changes-in-the-r-mapcalc-syntax-in-grass-gis-7/
-
- Hi Giovanni,
I apologize ... I accidentally switched "Counties" and "Places" in lines 4 and 5 of my description (cor... -
- I'm sorry but if you select a feature in a layer and you do not mark "use only selected features" then is like using ...
-
- Etienne Tourigny wrote:
> adding a note that Jurgen added a fix for this in commit:c065736b71f856c22814d2f29f248b88e4... -
- Recently there have been reports of issues with WFS/Geoserver (there is another ticket that report a freezewith geose...
-
- Yet in QGIS 1.7.4 Show all layers/Hide all layers is fast lightining as all layers are switched off and on at the sam...
-
- Tested on master and 1.7.4 on both linux and windows.
The attached layer "3763" causes qgis to crash if interpolatin... -
- fix was applied in qgis/master commit:04e826881a0d7d35605b8c3399e27fe3993e8a30
-
- Issue now is fixed in szekerest/master (https://github.com/szekerest) should be merged back to qgis
-
- Hallo Giovanni
ecw is listed (see attached file). I will wait for the update.
Thank you
Gerhard
-
- gespiel - wrote:
> Hallo Giovanni,
>
> i reinstalled the gedal ecw package, but ecw is not recognized.
>
> Picture ... -
- Hallo Giovanni,
i reinstalled the gedal ecw package, but ecw is not recognized.
Picture from osgeo4w online install... -
- Hallo Giovanni,
i reinstalled the gedal ecw package, but ecw is not recognized.
Picture from osgeo4w online install... -
- please install the package gdal-ecw. Reopen if necessary.
-
- please install the package gdal-ecw. Reopen if necessary.
-
- Hello,
trying to laod an ecw raster, qgis-dev reports, that ecw is not a supported raster format.
The problem occurs... -
- At a recent training course the issue still confirmed on a Snow Leopard Mac and QGIS 1.7.4: the georeferencer can't s...
-
- At a recent training course the issue still confirmed on a Snow Leopard Mac and QGIS 1.7.4: the georeferencer can't s...
-
- Tested on version 1.9.90-Alpha
-
- Trying to link to a SQL view that contains geometry.
I get offered the table in the list of possible layers.
Invalid... -
- It would be very useful to have an option to have the carved holes automatically filled with a new polygon.
-
- Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > > I'm using Debian/wheezy 64 bit and it works fine in master ver... -
- Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > > I'm using Debian/wheezy 64 bit and it works fine in master ver... -
- Giovanni Manghi wrote:
> > I'm using Debian/wheezy 64 bit and it works fine in master version!
>
> what version of g... -
> I'm using Debian/wheezy 64 bit and it works fine in master version!
what version of gdal/ogr?-
- Giovanni Manghi wrote:
> PS
>
> I'm using Ubuntu 11.10 64 bit. There have been reports that on other linux platforms... -
- PS
I'm using Ubuntu 11.10 64 bit. There have been reports that on other linux platforms seems to work fine. -
- Opening this
http://www.interlis.ch/interlis2/docs23/test23_20080410.zip
causes seg fault on Linux (qgis 1.7.4 and ... -
-
- The same applies for the "grid" tool.
-
- The same applies for the "grid" tool.
2012-03-25
-
-
- Hi, thanks for the sample.
It works fine here as both shape and postgis layer, using qgis-development version.
Ca... -
12:45 AM Bug report #5231: QGis crashes on Gradual styling
- It seems my ZIPPED datafile is too large to attach. I will send it to you with a service.
-
- I use QGis 1.7.4 on Windows XP. The attached file is an export from the theme I used. I *can't* reproduce the crash w...
-
- on what platform? can you please post a sample dataset that causes the issue? thanks.
-
- There are made significant improvements on saving styling on legends in QGis 1.7.4 vs 1.7.3, but if when chosen for s...
-
- Subject says it all. If I switch to "parallel", it shows fine. Tested on 1.7.4 and master.
-
- Nathan Woodrow wrote:
> Can you try a nightly build as this has already been added.
This thicket is duplicate of #32... -
- Nathan Woodrow wrote:
> Can you try a nightly build as this has already been added.
This thicket is duplicate of #32... -
12:05 AM Bug report #4583: Raster reprojection error (plus QGIS freeze)
- Hi Jurgen, we owe you a bounty?
Also available in: Atom