Activity
From 2012-03-11 to 2012-04-09
2012-04-09
-
05:14 PM Bug report #5252 (Reopened): MSSQL Estimated table parameter is not used
- Hi Tamas,
I just re-tested this and it still seems that the estimated metadata parameter is not being used correctly... -
- Hi Tamas,
I just re-tested this and it still seems that the estimated metadata parameter is not being used correctly... -
04:58 PM Bug report #4030: 1.7.0 Build failure with internal spatialite on OpenBSD
- Is it still valid?
Are you able to build QGis 1.8 (or the latest 1.7.x) on your OpenBSD? Does the build fail with "e... -
- Is it still valid?
Are you able to build QGis 1.8 (or the latest 1.7.x) on your OpenBSD? Does the build fail with "e... -
- Is it still valid?
Are you able to build QGis 1.8 (or the latest 1.7.x) on your OpenBSD? Does the build fail with "e... -
- Is it still valid?
Are you able to build QGis 1.8 (or the latest 1.7.x) on your OpenBSD? Does the build fail with "e... -
- The fix seems already present in branch 1.8.
-
- The fix seems already present in branch 1.8.
-
- Giovanni Manghi wrote:
> Then I would say to don't allow unselect a band
Why should anybody unset a band? Any reason?
-
- It was fixed in commit:337eec35fa
-
- It was fixed in commit:337eec35fa
-
02:37 PM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
- Giovanni Manghi wrote:
> if the issue is a higher level we should change the title of the ticket
IMHO, it does not d... -
02:21 AM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
- Paolo Cavallini wrote:
> Also the count is broken here, possibly because of the same issue (it always returns 0).
if... -
02:09 PM Bug report #4955: Wrong results, when calculated results are too long for DBF field
- Actually, it's a problem of the field type:
If Precision = 0, even if field type has been set to Float
the result is... -
- I can confirm this issue, it can indeed lead to further errors.
-
- I did some tests in more detail and I noticed that sometimes QGIS crashes!
It is very difficult to reproduce!
When i... -
- Alexander Bruy wrote:
> Weird, still works for me. I tried several times with different vectors.
The same for me, no... -
09:34 AM Bug report #5335: "export/add geometry columns" make QGIS crash if you have previously opened the...
- Weird, still works for me. I tried several times with different vectors.
-
- Giovanni Manghi wrote:
> Giovanni Manghi wrote:
> > Alexander Bruy wrote:
> > > Maybe it crashes when this fields cr... -
- Giovanni Manghi wrote:
> Alexander Bruy wrote:
> > Maybe it crashes when this fields created by user and have differ... -
- Alexander Bruy wrote:
> Maybe it crashes when this fields created by user and have different data type?
no, it cras... -
- Tested under 32-bit Slackware and QGIS master commit:d1a11bec96 and it works fine with both options (create new layer...
-
- ...
-
01:13 PM Bug report #5336 (Closed): SREF98 projection isnt listed in qgis 1.7.4
- In QGIS 1.7.4 projection SREF98 (EPSG code(s) 4073-4075) is not listed. GDAl version 1.9.0. Installed ftom osgeo4w.
... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"95045f86f71b8b102a5301bb44be0f33304ad966".
Thanks! -
09:24 AM Bug report #5333 (Closed): QGis crashes if you use "pretty breaks" on a column with the same valu...
- Fixed in changeset commit:"95045f86f71b8b102a5301bb44be0f33304ad966".
-
- I confirm the issue on Linux and also on Windows.
On Windows/master/osgeo4w is even worst, as it is just enough to s... -
- I confirm the issue on Linux and also on Windows.
On Windows/master/osgeo4w is even worst, as it is just enough to s... -
- I confirm the issue on Linux and also on Windows.
On Windows/master/osgeo4w is even worst, as it is just enough to s... -
10:09 AM Feature request #5319: Performance issues with new symbology and levels
- Going to Labeling -> Advanced -> Placement, there are various options.
"Horizontal" specifically states "slow".
So th... -
- cremat0rio - wrote:
> Sorry, there's no issue.
> Horizontal placement, in "Layer labeling settings", was inadvertentl... -
- Sorry, there's no issue.
Horizontal placement, in "Layer labeling settings", was inadvertently selected.
Sorry.
-
- As for the original description this is duplicate of #4955
-
- As for the original description this is duplicate of #4955
-
- alobo - wrote:
> (but R is much faster than QGIS, few seconds
> against few minutes
counts made with the field cal... -
- Update to issue 2: clarified thanks to Roger Bivand, no need to open another
ticket, QGIS, postgis, and R are coincid... -
- alobo - wrote:
> ok, it seems there are 2 issues here:
> 1. The wrong results I get with
> vector/Geometry Tools/Expo... -
- ok, it seems there are 2 issues here:
1. The wrong results I get with
vector/Geometry Tools/Export/Add Geometry Colum... -
> the same values are computed by postgis.
so I would try to understand why values computed with R are different an...-
- Giovanni Manghi wrote:
> After all the two issues are not that unrelated.
>
> If you compute areas with the field ca... -
- After all the two issues are not that unrelated.
If you compute areas with the field calculator in a enough wide fie... -
- After all the two issues are not that unrelated.
If you compute areas with the field calculator in a enough wide fie... -
- After all the two issues are not that unrelated.
If you compute areas with the field calculator in a enough wide fie... -
- I don't think that this is related to #4955 because that issue is different: if the column is not wide enough the val...
-
- Tomas Vrana wrote:
> This patch actually broke my gpsd support. Reverting the patch fixed the problem.
so this means... -
- Tomas Vrana wrote:
> This patch actually broke my gpsd support. Reverting the patch fixed the problem.
so this means... -
- Tomas Vrana wrote:
> This patch actually broke my gpsd support. Reverting the patch fixed the problem.
so this means... -
- SPIT is not maintained and it will be discontinued/removed when DB Manager will allow multiple shape upload. I think ...
-
- It still doesn't work on Windows/master/osgeo4w, but I'm not sure if the Windows build is up to date as the Ubuntu/ni...
-
- It still doesn't work on Windows/master/osgeo4w, but I'm not sure if the Windows build is up to date as the Ubuntu/ni...
-
- Alexander Bruy wrote:
> Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
It still doesn't work ... -
- Alexander Bruy wrote:
> Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
It still doesn't work ... -
- Alexander Bruy wrote:
> Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
It still doesn't work ... -
- Alexander Bruy wrote:
> Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
It still doesn't work ... -
- fixed in commit:30eaf192e731aeaa74780123ada445bfda971737
-
- fixed in commit:30eaf192e731aeaa74780123ada445bfda971737
2012-04-08
-
01:04 AM Feature request #4154: Add GDAL calc
- See also:
http://smathermather.wordpress.com/2011/12/01/gdal_calc-py-raster-calculator-using-numby-functions/ -
- Also the count is broken here, possibly because of the same issue (it always returns 0).
-
11:34 PM Feature request #5334 (Closed): MS SQL: Support non spatial tables in browser dock
- Would be good to have support to show non geometry tables in the browser dock.
-
- I confirm, but only on field [code_two]!
Columns with values equal at 0 not seem be affects!
this is what I get in t... -
09:52 AM Bug report #5333 (Closed): QGis crashes if you use "pretty breaks" on a column with the same valu...
- QGis crashes if you use "Pretty Breaks" on a column with the same value for every row
_Fatal: ASSERT: "!isEmpty()" in... -
- Fixed in commit commit:30eaf19!
I can confirm on Linux! -
- I read #3742 and I agree that can make sense from the technical point of view, but from the user point of view it is ...
-
- Just installed from the nightly build repo and also recompiled and the issue is gone...
-
- Just installed from the nightly build repo and also recompiled and the issue is gone...
-
- Results for large polygons are wrong when calculated with vector/Geometry Tools/Export/Add Geometry Columns
Example i...
2012-04-07
-
03:36 PM Bug report #4050: GPSD Server WATCH request
- This patch actually broke my gpsd support. Reverting the patch fixed the problem.
-
- Fixed in changeset commit:"59a08c41096a507d3a29bf82079766a62f12c94f".
-
09:53 AM Bug report #5331 (Closed): no -fpermissive in OS X clang
- On OS X, clang does not have the -fpermissive flag. This was added to SIP flags in commit:893f305c51.
No compile er... -
- Fixed in changeset commit:"f4460cb82154b0b5612e8b61c335b7fbecfda13d".
-
- Fixed in changeset commit:"a82a2438e1b9bb4656d2a63ef21800d1d2a01ff2".
-
- I suspect so
-
- Nathan Woodrow wrote:
> I found what has caused this. Tim made a commit that added layersAdded and layersRemoved to ... -
- I found what has caused this. Tim made a commit that added layersAdded and layersRemoved to the MapLayerRegistry whi...
2012-04-06
-
01:26 PM Bug report #5274: QGIS rebuild really necessary for new GRASS release?
- Thank you for clarifying further. I guess we can close this ticket.
-
05:49 AM Bug report #5330 (Closed): Join: Null data handling different for a joint column than for a norma...
- Using the attached data (data is from GADM, I hope using it here does not violate redissemination rules...):
* Load ... -
- Fixed in commit:55d92681d7eef2
Thanks -
- Fixed in commit:55d92681d7eef2
Thanks -
03:20 AM Bug report #5329 (Closed): wrong ellipsoid semi-minor axis calculation inside QgsDistanceArea
- In Qgis the semi-minor axis of the ellipsoid is calculated [1] with:
b = a - (f/a)
where
b = semi-minor axis
a = se...
2012-04-05
-
01:00 AM Bug report #5274: QGIS rebuild really necessary for new GRASS release?
- Jef is right. We cannot get around it without some terrible hack, like checking version of installed GRASS and then c...
-
10:04 PM Bug report #5326: Checking "on the fly CRS transformation" changes silently the selected CRS (usu...
- I think you both are right. jef technically, Giovanni from user viewpoint. But the 'confusion' comes from the fact th...
-
- I'll tag this as feedback for myself, to remember me to leave feedback or close after studying the other ticket.
-
> The project CRS defines which CRS the canvas shows - but only if OTFR is on. Otherwise it's not used, IOW meaning...-
- Giovanni Manghi wrote:
> > Without OTFR the project CRS is meaningless
> sorry, I don't understand this statement
... -
- Hi Jurgen
Jürgen Fischer wrote:
> Without OTFR the project CRS is meaningless
sorry, I don't understand this statem... -
- Without OTFR the project CRS is meaningless and without any layers there nothing else and WGS84 is just the default C...
-
- Tested on QGIS master on both Linux and Windows.
Richard, I'll give the ticket to you because if I'm not wrong you ... -
- If I use the SPIT plugin to import polygon features in PostGIS I get this:...
-
12:13 PM Bug report #5327 (Closed): Nodetool partially broken on qgis-master
- in this video, strange behavior nodetool: http://youtu.be/Z4cUn3-xx6E...
-
- Marco and nirvn, if you have still evidence of this issue please reopen.
-
- Marco and nirvn, if you have still evidence of this issue please reopen.
-
12:10 PM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
- This seems to have resolved itself. I tried logging in with Unity2D rather than normal Unity and QGIS worked. Then ...
-
- I tested packages of self compiled qgis-master from 3/4 days ago and it works as expected.
-
- I confirm this "erratic" behaviour also on Windows/osgeo4w.
-
- Just installed/updated qgis-master on two Ubuntu 11.10 machines.
When adding a WMS layer it doesn't show anymore how... -
- Tested on QGIS master on both Windows and Linux (with vectors).
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
- I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it...
-
03:10 AM Bug report #5317 (Closed): Layers not turning off in layer control when multiple layers selected
- If I select multiple layers in layer control, it will not turn them all off. It seems to be unpredictable as to which...
-
- Confirmed also on linux. No layers do show in the "snapping options" dialog.
-
- Confirmed also on linux. No layers do show in the "snapping options" dialog.
-
- Confirmed also on linux. No layers do show in the "snapping options" dialog.
-
- Confirmed also on linux. No layers do show in the "snapping options" dialog.
-
- When accessing the snapping options menu, the vector layers from the project are not shown in the dialog so I cannot ...
-
07:32 AM Feature request #5315 (Closed): allow a layer to have relative coordinates
-
07:13 AM Bug report #5322: ODBC connection window queries all database content
- partially answering to myself , ogr does support odbc SQLTables() : [http://www.osgeo.org/pipermail/gdal-dev/2009-Oct...
-
- I forgot to check "causes crach" checkbox.. Not true, but freezes Qgis until OGR as read every single line in all dat...
-
- Hi all,
odbc interface in QGis does "SELECT * from mytable" for *ALL* tables when trying to collect table list, jus... -
06:28 AM Bug report #5303: SQL Server new provider , select fails
- The problem comes from a column in uniqueIdentifier. The only format for the key seems to be integer.
-
06:13 AM Feature request #4124: Add support for wfs 1.1.0
- Some work seems to have happened in trunk, but WFS 1.1.0 layers still don't display.
e.g. http://data.wien.gv.at/dat... -
- Some work seems to have happened in trunk, but WFS 1.1.0 layers still don't display.
e.g. http://data.wien.gv.at/dat... -
05:11 AM Bug report #5321 (Closed): Inserting geometries using a WFS-T of ArcGIS Server
- If point geometries are inserted, which results in an error: "Error: An object is not inserted"
*Error response:*
<ow... -
- sorry I didn't see that #3388 was already closed. Anyway you will need to provide sample data and further information...
-
- sorry I didn't see that #3388 was already closed. Anyway you will need to provide sample data and further information...
-
- duplicate of #3388
-
- duplicate of #3388
-
- I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbology with levels, QGis gets... -
> QGis gets very slow and only uses one thread (it seems so), wich is strange nowadays with multicore processors.
f...-
- I have the same problem.
I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbolog... -
- I have the same problem.
I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbolog... -
03:16 AM Bug report #5133: Error in high resolution exports with transparent rasters
- I haven't test on win XP with v1.7.4. I prefer you wait (as soon as possible).
Thx -
- Alexis Viaud wrote:
> Up!
> The new LTS version is the 1.7.4. Tested on ubuntu 10.10 pc64 it work. No line of pixels ... -
- Up!
The new LTS version is the 1.7.4. Tested on ubuntu 10.10 pc64 it work. No line of pixels anymore, but still betwe... -
- The provider should return the default value for a column using QgsVectorDataProvider::defaultValue(int).
See Postgr... -
- Even I guess this is an error in the vector provider.
I tested the operation in other GIS software and the result is ...
2012-04-04
-
- Thanks Bill!
-
- Thanks Bill!
-
03:59 PM Bug report #5241: WFS client does not work anymore with Geoserver
- This error was introduced by the patch for bug 4604, which sends a DescribeFeatureType request that contains extraneo...
-
- Probably the problem lies in the vector provider
-
- Alexander Bruy wrote:
> Not sure that this is fTools problem. As I said before, Field Calculator (core functionality)... -
- Not sure that this is fTools problem. As I said before, Field Calculator (core functionality) also don't work with su...
-
- fixed in commit:25988d67
-
- fixed in commit:25988d67
-
- Fixed in changeset commit:4a9e8ccb862225b73b89297d6467caf9f1bc0789.
-
- Fixed in changeset commit:4a9e8ccb862225b73b89297d6467caf9f1bc0789.
-
02:10 PM Bug report #5284: MS SQL features disappear if SQL errors on insert
- Fixed in https://github.com/szekerest/Quantum-GIS/commit/4fea2c7047cc4fbf0ce5a4da37e584de3dedd511
-
- Fixed in changeset commit:"4a9e8ccb862225b73b89297d6467caf9f1bc0789".
-
- Fixed in https://github.com/szekerest/Quantum-GIS/commit/4fea2c7047cc4fbf0ce5a4da37e584de3dedd511
-
- I guess a useful enhancement could be the option for the layers in the properties to choose the coordinate of the
ge... -
- A really useful enhancement for qgis (and obviously qgis-server)
could be the capability to define an "Acetate Layer"... -
- "-s Smooth corners of area features"
-
- The native GRASS gui/module allows it and the elevation maps can be viewed at the same time in the nviz interface.
-
- it returns interesting/useful infos on raster maps
-
- Subject says it all. Without this option the module is useless.
-
- Tested with the coordinate capture point tool, on both Windows and Linux. In the similar r.los module pasting the coo...
-
- See the attached image. Does not happen for point symbols. Tested on master.
-
- Google layers plugin is a 3rd party one (so in any case you be needed to file a ticket in the proper section of the b...
-
- Google layers plugin is a 3rd party one (so in any case you be needed to file a ticket in the proper section of the b...
-
09:22 AM Bug report #5304 (Rejected): Google layers plugin won't load
- I updated to 1.7.4 and the first time I ran it gave me the following error (see screen shot).
-
- Using the new SQL server provider with geometry table, it's not possible to have the attribut datas in the window 'at...
-
- The new provider is able to adress geometry Sql server 2008 tables.
No features is loaded when we try to use geograph... -
- I withdraw my comment: the problem with the 0,0 range resulting
from applying the STD option is not related to the nu... -
- According to what I'm seeing, is not only that the "save" (disquette) button is not
present for single band raster la... -
- fixed with the same fix for #5013
-
- fixed with the same fix for #5013
-
02:47 AM Feature request #5301 (Closed): Save as image do not export text annotations
- When you use "Save as Image" dialog to export your map as an image file, text annotations are not incorporated in the...
2012-04-03
-
08:37 PM Bug report #5257: fTools 'Define current projection' problem
- Confirmed (Fedora 14 x 64 / 1.9.90-Alpha, 927dcbd). The configuration files were removed before opening QGIS (~/.qgis...
-
- Confirmed here, current trunk on debian testing
-
- Jürgen Fischer wrote:
> But that might also be an issue for different versions of gcc on Linux - waiting for the nigh... -
11:19 AM Bug report #5013: Unchecking a group in TOC unchecks all layers in it, but layers are not removed...
- The project file loading optimization was not working anymore. I suppose commit c0b720805b5f21b4fc8cb108682b8e8a325e4...
-
-
10:42 AM Bug report #5285: NoData value should not be considered when classifying a raster
- You're right, sorry 'bout that. I evidently don't have permission to close it, can someone go ahead and do that?
-
- probably duplicate of #1380. Please check and confirm.
-
- The file comes from a geoMedia export, so this may be the root of the problem.
-
- Apparently, the error occurs when the SHP is 3D MultiPoint.
If you convert SHP geometries from 3DMultiPoint to Point,... -
- Field Calculator also can't create columns with X and Y for this dataset
-
- Add geometry columns command does not work, as it returns two columns filled with 0s. See attached sample.
2012-04-02
-
- William Kyngesburye wrote:
> That --no-undefined flag is causing trouble. The OS X ld does not have that option (OSX... -
- That --no-undefined flag is causing trouble. The OS X ld does not have that option (OSX ld is a custom job), but it ...
-
- does commit:9e57e20f61d help on OSX?
-
- Fixed in changeset commit:"9e57e20f61d025132f5b44f60a892e7263043661".
-
11:46 PM Bug report #5272: Symbol level dialog causes QGIS crash
- Hi,
I renamed .qgis folder but never has changed. I think the problem is not depending on some plugin.
Under Qgis 1.7... -
> Perhaps some other conditions or global setting on qgis to do it ?
please check if there is any 3rd party plugin ...-
- When classifying a raster or when calculating min and max, the NoData value (on the transparency tab) should be ignor...
-
- If you are saving a feature and the database fails to insert due to a SQL error the feature will disappear with no er...
-
- When using a table with a date field, trying to save the record back the feature is removed from the map canvas and t...
-
04:42 PM Bug report #5282: crssync not executed in debian postinst nor when "make install" is run
- Jurgen - thanks
please consider this patch which adds CRS_SYNC[=TRUE] option. After installing *.db files, crssync i... -
- - call in postinst added in commit:1011198 and commit:520e488.
- AFAIK there won't be another release of 1.7
- only r... -
- - call in postinst added in commit:1011198 and commit:520e488.
- AFAIK there won't be another release of 1.7
- only r... -
- the new crssync utility is not run in key moments - debian installs and 'make install'. It is important that it be ex...
-
- Marco Hugentobler wrote:
> This is probably related to the optimizations I did about a month ago (speed up of loading... -
- Fix ok!
Thanks! -
- Should be fixed in master 9e15906f063a4947324b68c94ff65e1e9c4e05c1. Please test and reopen if not.
-
- This is probably related to the optimizations I did about a month ago (speed up of loading projects).
-
- gespiel - wrote:
> Hello,
>
> in the OSGeo4W online installer under libs, version 3.2.1 is shown as installed.
> QGI... -
10:41 AM Bug report #5161: Updating GEOS library to 3.3 on OSGeo4w
Hello,
in the OSGeo4W online installer under libs, version 3.2.1 is shown as installed.
QGIS-Master reports under "...-
- Jürgen Fischer wrote:
> a bit vague. Did you check that the source and destination CRSes are picked up correctly?
H... -
08:25 AM Bug report #5257: fTools 'Define current projection' problem
- Giovanni Manghi wrote:
> > Well, this error occurred in several new and clean installations of QGIS 1.7.4 in windows ... -
> Well, this error occurred in several new and clean installations of QGIS 1.7.4 in windows computers.
it depends o...-
- Giovanni Manghi wrote:
> I have noticed that sometimes some old "configuration" of ftools remain stored in the .qgis ... -
- I have noticed that sometimes some old "configuration" of ftools remain stored in the .qgis folder, and removing it m...
-
- elcuco - wrote:
> Here it goes the shapefile that i'm trying to get fTools 'Define current projection' to work. The ... -
- Here it goes the shapefile that i'm trying to get fTools 'Define current projection' to work. The CRS that I whant i...
-
- Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
Not reproducible here with lat... -
- Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
can you please attach a sample... -
- Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
can you please attach a sample... -
02:23 AM Bug report #5257: fTools 'Define current projection' problem
- This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
-
05:43 AM Bug report #5259: moving polygon individual nodes broken in qgis master, end up moving two nodes ...
- Confirmed! And same laziness here....
In the same vein, still in "node tool" mode, click on the polygon to select it...
2012-04-01
-
- See the WPS client plugin
-
- fixed in commit:c29fb5a and commit:8ae7651
-
- fixed in commit:c29fb5a and commit:8ae7651
-
- Thanks. Can this stuff be backported to 1.8?
-
- Fixed in changeset commit:"51011559c4d7cdb5a11e50cae23a20b688df2b77".
-
- Fixed in [email protected]:szekerest/Quantum-GIS.git
-
- Fixed in changeset commit:"51011559c4d7cdb5a11e50cae23a20b688df2b77".
-
- Fixed in [email protected]:szekerest/Quantum-GIS.git
-
- Hi,
actually the transparency il allowed to set in the main layer propertier for all the layer.
This chhose is ok whe... -
- I try using the
qgis-dev commit:157541e (01/04/2012)
(very nice the
Using the shapefile given opening the propertie...
2012-03-31
-
- step 1: load data with legend loaded as default in QGIS Master
step2: open properties dialog for layer RU_st018poly
s... -
- cannot replicate here, can you please attach sample data and exact steps? thanks.
-
- Attemping to access to symbol level dialog from layer properties of a polygon shape layer causes QGIS crash.
-
07:24 PM Bug report #5183: Scale bar has wrong units for GeoJSON layer
- This is not a bug--please close. Layers must be transformed/reprojected via Layer:Save As...
Adding this note as an... -
- The GRASS library checks itself. It probably has good reason not to trust its own ABI.
-
- I shipped a version of QGIS, that was built using GRASS 6.4.1. After updating to GRASS 6.4.2 without rebuilding QGIS,...
-
- James Perrins wrote:
> I don't think the join makes it non unique - as I say - it definitely works in map server - wo... -
- Trunk doesn't build with gcc 4.7, but builds with 4.6.
In the first case it complains:
/builddir/build/BUILD/qgis-1... -
04:15 AM Bug report #5264: Spatialite Provider / fTools Select by Location does not find intersections
- I've uploaded a project for others to test.
2012-03-30
-
- Etienne Tourigny wrote:
> The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not ap... -
- Etienne Tourigny wrote:
> The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not ap... -
- The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not apply).
crssync must be cal... -
- There is a problem in Master with the queries for the crs lookup, they return the deprecated value first, so that one...
-
- ouch, 4355 is the attachment number of the patch to #4977 - so the association with this ticket is wrong.
-
-
01:43 PM Feature request #4355 (Closed): Performing deletion on layer with feature counts turned on should...
-
01:49 PM Bug report #5239: TIN interpolation causes crash
- Hi,
could anybody check this solution?
I think it was a numerical problem. The value of the leftOfTresh was too smal... -
- Hi,
could anybody check this solution?
I think it was a numerical problem. The value of the leftOfTresh was too smal... -
- Confirmed (on Linux). Joined text field (tested with a csv) are truncated at 80 chars when (re)saving the shapefile.
-
- Confirmed (on Linux). Joined text field (tested with a csv) are truncated at 80 chars when (re)saving the shapefile.
-
- I tried to join a field that had cells with up to 220 characters to a shapefile. However when I saved the new shapefi...
-
- I confirm that the issue still persists!
-
- Hi all,
my admin sys asks me to deport .qgis under Application Data to comply with Windows profile replication tools... -
03:53 AM Bug report #5235: Link to SQL server spatial view fails
- I don't think the join makes it non unique - as I say - it definitely works in map server - wouldn't that have the sa...
-
- Are you sure the left outer join on the view definition doesn't affect the uniqueness of the MI_PRINX column?
If you ... -
- OK - a bit more...
This view works:
SELECT SiteCode, Geom AS MyGeom, MI_PRINX
FROM dbo.SitesGeom
In my... -
- James Perrins wrote:
> Yes - unique integer field is present.
>
> Same view works well in your mapserver sql2008 plu... -
02:48 AM Bug report #5102: query ["field" != 'NULL'] works while ["field" = 'NULL'] doesn't
- Hi
in my case (qgis 1.7.4.5 8058b22) I was trying to select non null features, values coming from a joined table fiel... -
- fTools 'Select by Location' tool does not find intersecting geometry when using a Spatialite Layer.
Tested working f...
2012-03-29
-
- Yes - unique integer field is present.
Same view works well in your mapserver sql2008 plugin
CREATE TABLE [dbo].[... -
- How to replicate:
Open QGIS (keep default CRS, WGS84 LatLon)
Open Georeferencer (Raster|Georeferencer)
Load an image ... -
09:27 PM Bug report #5259 (Closed): moving polygon individual nodes broken in qgis master, end up moving t...
- Simple steps to reproduce the "disease":
1/ open qgis
2/ create a new (shapefile) vector layer
3/ switch the vector l... -
- Alexander Bruy wrote:
> Ok, but IMHO this is not an fTools issue. As I can see crash occurred during initialization o... -
- Ok, but IMHO this is not an fTools issue. As I can see crash occurred during initialization of QgsVectorLayer object
-
- Alexander Bruy wrote:
> So I think we can close this ticket and maybe open another about restoring previous default s... -
07:55 AM Bug report #5251: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
- When you choose the whole directory (default) the CRS selector dialog popups well for each shapefile in the directory...
-
- Well, the problem is not in Merge shapefiles to one. And not in the lack of .prj file (at least this is not main issu...
-
- Fixed in changeset commit:"2abd900ed6f73d93866283c9c3dce191d451a686".
-
- Hi,
In QGIS 1.7.4, after I loaded a shapefile without a .prj file, I tried to use the fTools 'Define current projecti... -
- Partly fixed with commit:287bebe961a9a0a91781a0cf4f7b4a034f75edc4
Thanks Radim. -
08:17 AM Bug report #5258 (Closed): WMS layer properties should be updated upon visiting the 'layer proper...
- I have a WMS server that is changing its data on an hourly basis and I'd like to always know what data is being shown...
-
07:20 AM Bug report #5256: QGIS polygon Centroid (NewLabeling bug etc)
- I think the patch should work, but I have no way to verify this.
Does anyone can help with verification? -
- See also #4634
-
- In QGIS Core I find code looks like this:
http://pastebin.com/qRcAa9GC
I think it code must be
http://pastebin.com/k... -
- See also #5256
-
- This is because 1.7.4 and master now compiled against GDAL 1.9.0.
-
03:09 AM Bug report #5255 (Closed): Wrong codepage of shapefile
- When opening shapefiles, it doesn't matters what codepage You choose, it is always UTF-8 in QGIS 1.74, so polish lett...
2012-03-28
-
- Currently, 3D GRASS vectors cannot be loaded in QGIS. It would be useful to add a support to it, even if the results ...
-
12:31 AM Bug report #5253 (Closed): labels min scale and max scale display
- On shp layers, i setup the scale for label displaying.
It works, so i save my project
I quit the project, I quit Qg... -
- FYI, I'm seeing the same crash as described by Marco on a 32-bit machine using the master ppa build.
-
- When loading the "Add MS Tables(s)" Dialog and connecting to a MSSQL database, determining the geometry type is very ...
-
- HI Tamas,
Thanks for the fix on the PK.
I still seems to be having problem with this linestring dataset (http://cre... -
- HI Tamas,
Thanks for the fix on the PK.
I still seems to be having problem with this linestring dataset (http://cre... -
- should be working for now
-
- should be working for now
-
- Yes, it worked well for me too after setting the projection
-
- The cause can be the lack of .prj files. I tested on Windows and it crashed at the first attempt, then I fixed the sh...
-
- Using master installed following https://issues.qgis.org/projects/quantum-gis/wiki/Download
Platform and platform ver... -
- I can perform the operation you show in the video without any major issue, also selecting many features at one time. ...
-
02:53 AM Bug report #5243: Shapefile - merging cause crashes in 1.7.4
- The sample data are in the ticket (https://issues.qgis.org/attachments/4348/shapefiles_merge_crashes.zip). That's my ...
-
- Gerald Fringeli wrote:
> This video shows a crash after a merging of 2 features.
> NB: In the video, qgis seems to re... -
- This video shows a crash after a merging of 2 features.
NB: In the video, qgis seems to remain open, in reality it cl... -
- Hi,
When we want to make a legend of a graduated or categorized vector, we choose the option Graduated or Categorized... -
- Several times I have created a new *Point* layer (after setting 10 attributes) while what I wanted was to create a *P...
-
07:39 AM Feature request #5248 (Closed): Blending modes (composition modes)
- It would be a great addition to add blending modes for colors/layers. Blending modes such as multiply, color dodge, e...
-
07:14 AM Bug report #4945: Missing Krovak East North 102067 projection
- I can confirm this for the version 1.7.4. It is a serious issue since it is not possible to force custom projections ...
-
-
- James Perrins wrote:
> Same error with your latest build I'm afraid
Do you have an integer column with unique values... -
- Giovanni Manghi wrote:
> I can replicate the issue also with the standalone version, but not with a simple project ma...
2012-03-27
-
- I can replicate the issue also with the standalone version, but not with a simple project made of one or few layers. ...
-
- It happens only on 1.7.4/osgeo4w, not with the standalone nor with master/osgeo4w.
Add a vector and set the project ... -
- As it is now in both master and 1.7.4 if a project is saved with unchecked WFS layers, those are loaded anyway when t...
-
> One quick question before I close out the ticket (or should I move it elsewhere?). I have never used GRASS but it ...-
> One quick question before I close out the ticket (or should I move it elsewhere?). I have never used GRASS but it ...-
03:57 PM Bug report #5223: ftools Intersection fails to gathering all shapes
- Thank you Giovanni. I just created a ticket http://trac.osgeo.org/geos/ticket/521 on the GEO web site. I hope I put ...
-
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu... -
- Same error with your latest build I'm afraid
-
- James Perrins wrote:
> I can try - is there a Windows build in there somewhere - or is it just source ?
>
> In which... -
- I can try - is there a Windows build in there somewhere - or is it just source ?
In which case presumably I need to ... -
- James Perrins wrote:
> A bit more information - hope this helps:
>
> OK - I set up a really simple view - I have a t... -
- A bit more information - hope this helps:
OK - I set up a really simple view - I have a table SitesGeom that is disp... -
- The error message should have of course been:
dbname='CMSI' host=JAMESP-THINK srid=27700 type=POLYGON table="dbo"."v... -
- Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated.
-
- Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated.
-
- Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated.
-
02:06 PM Bug report #2790: Python error moving nodes with OSM plugin
- Seems worse with 1.7.4, at least I can do some editing with 1.7.1. Both from Fedora rpms.
-
- Seems worse with 1.7.4, at least I can do some editing with 1.7.1. Both from Fedora rpms.
-
- As far as expression uses 3 logic states (true, false, null) the only way to print strings concatenated to a field is...
-
- Hi, in the zip file there is only ONE shape.
-
- Hi, in the zip file there is only ONE shape.
-
- Hi, in the zip file there is only ONE shape.
-
- Crash when merging polygons. No warnings, no error message. The first mergers do not cause crashes. This only happens...
-
06:02 AM Feature request #5242 (Closed): Open KMZ without needing to unzip
- It would be awfully nice if we could import KMZ files directly, without needing to unzip and import the KML files.
-
-
03:44 AM Bug report #4567: Ftools - Union returns Wrong Table of Attributes
- I try to reinstall and update Qgis, both 1.7.4 and 1.9.90, and the problem presisted.
I uninstalled QGIS completly, ...
2012-03-26
-
- It may well work out of the box. It has to be checked when GRASS7 hits major distros.
-
- http://pvanb.wordpress.com/2012/03/21/changes-in-the-r-mapcalc-syntax-in-grass-gis-7/
-
- Hi Giovanni,
I apologize ... I accidentally switched "Counties" and "Places" in lines 4 and 5 of my description (cor... -
- I'm sorry but if you select a feature in a layer and you do not mark "use only selected features" then is like using ...
-
- Etienne Tourigny wrote:
> adding a note that Jurgen added a fix for this in commit:c065736b71f856c22814d2f29f248b88e4... -
- Recently there have been reports of issues with WFS/Geoserver (there is another ticket that report a freezewith geose...
-
- Yet in QGIS 1.7.4 Show all layers/Hide all layers is fast lightining as all layers are switched off and on at the sam...
-
- Tested on master and 1.7.4 on both linux and windows.
The attached layer "3763" causes qgis to crash if interpolatin... -
- fix was applied in qgis/master commit:04e826881a0d7d35605b8c3399e27fe3993e8a30
-
- Issue now is fixed in szekerest/master (https://github.com/szekerest) should be merged back to qgis
-
- Hallo Giovanni
ecw is listed (see attached file). I will wait for the update.
Thank you
Gerhard
-
- gespiel - wrote:
> Hallo Giovanni,
>
> i reinstalled the gedal ecw package, but ecw is not recognized.
>
> Picture ... -
- Hallo Giovanni,
i reinstalled the gedal ecw package, but ecw is not recognized.
Picture from osgeo4w online install... -
- Hallo Giovanni,
i reinstalled the gedal ecw package, but ecw is not recognized.
Picture from osgeo4w online install... -
- please install the package gdal-ecw. Reopen if necessary.
-
- please install the package gdal-ecw. Reopen if necessary.
-
- Hello,
trying to laod an ecw raster, qgis-dev reports, that ecw is not a supported raster format.
The problem occurs... -
- At a recent training course the issue still confirmed on a Snow Leopard Mac and QGIS 1.7.4: the georeferencer can't s...
-
- At a recent training course the issue still confirmed on a Snow Leopard Mac and QGIS 1.7.4: the georeferencer can't s...
-
- Tested on version 1.9.90-Alpha
-
- Trying to link to a SQL view that contains geometry.
I get offered the table in the list of possible layers.
Invalid... -
- It would be very useful to have an option to have the carved holes automatically filled with a new polygon.
-
- Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > > I'm using Debian/wheezy 64 bit and it works fine in master ver... -
- Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > > I'm using Debian/wheezy 64 bit and it works fine in master ver... -
- Giovanni Manghi wrote:
> > I'm using Debian/wheezy 64 bit and it works fine in master version!
>
> what version of g... -
> I'm using Debian/wheezy 64 bit and it works fine in master version!
what version of gdal/ogr?-
- Giovanni Manghi wrote:
> PS
>
> I'm using Ubuntu 11.10 64 bit. There have been reports that on other linux platforms... -
- PS
I'm using Ubuntu 11.10 64 bit. There have been reports that on other linux platforms seems to work fine. -
- Opening this
http://www.interlis.ch/interlis2/docs23/test23_20080410.zip
causes seg fault on Linux (qgis 1.7.4 and ... -
-
- The same applies for the "grid" tool.
-
- The same applies for the "grid" tool.
2012-03-25
-
-
- Hi, thanks for the sample.
It works fine here as both shape and postgis layer, using qgis-development version.
Ca... -
12:45 AM Bug report #5231: QGis crashes on Gradual styling
- It seems my ZIPPED datafile is too large to attach. I will send it to you with a service.
-
- I use QGis 1.7.4 on Windows XP. The attached file is an export from the theme I used. I *can't* reproduce the crash w...
-
- on what platform? can you please post a sample dataset that causes the issue? thanks.
-
- There are made significant improvements on saving styling on legends in QGis 1.7.4 vs 1.7.3, but if when chosen for s...
-
- Subject says it all. If I switch to "parallel", it shows fine. Tested on 1.7.4 and master.
-
- Nathan Woodrow wrote:
> Can you try a nightly build as this has already been added.
This thicket is duplicate of #32... -
- Nathan Woodrow wrote:
> Can you try a nightly build as this has already been added.
This thicket is duplicate of #32... -
12:05 AM Bug report #4583: Raster reprojection error (plus QGIS freeze)
- Hi Jurgen, we owe you a bounty?
-
- Hi,
compiling qgis-server , with last revision of trunk, I have
no error in configuring phase, but this error in comp... -
- Salvatore Larosa wrote:
> One more thing, Might it solve the problem very like with the SPIT plugin?
> Worth to file ... -
- Salvatore Larosa wrote:
> One more thing, Might it solve the problem very like with the SPIT plugin?
> Worth to file ... -
- Jürgen Fischer wrote:
> commit:49456116 should fix this.
Yes, solved!
Thanks!
I can't change the status ticket to cl... -
- commit:49456116 should fix this.
-
03:20 AM Bug report #5227: Can't read linstring table from new MSSQL provider
- Yes, if you specify a primary key and identity - a layer is added. Thank.
-
- When connecting to SQL Server (new native driver) to the table with the type of *geography* - longitude and latitude ...
2012-03-24
-
- Ok this is related to the int column *not* being a primary key and also *not* being a identity spec.
Create the tabl... -
- Ok this is related to the int column *not* being a primary key and also *not* being a identity spec.
Create the tabl... -
- Seems to be related to a primary key issue. Looking into it now.
-
- I can connect to the server and list the tables. But as per Sergey M, I get an invalid layer error message when I try...
-
- The same problem
SQL:... -
- Do you get any errors?
Can you open line and polygon tables correctly?
Are you able to supply and sample set so I... -
- I also tried the version 1.7.4 is working correctly on Windows!
The problem seems to be present only in the master ve... -
- Something terrible has happened! :-)
I tried to edit and save with QGIS 1.7.3 (on the PC of a friend, but after that... -
- Salvatore Larosa wrote:
> I noticed that it happens only if the geometry is identified as a 'MULTI[LINESTRING,POINT,P... -
- I noticed that it happens only if the geometry is identified as a 'MULTI[LINESTRING,POINT,POLYGON]'
-
- Jürgen Fischer wrote:
> The constraint is the problem (or QGIS' ignorance about it, if you like). Changing it to
>
... -
- Salvatore Larosa wrote:
> I did try to add some constraints:
> CONSTRAINT enforce_dims CHECK (st_ndims(geom) = 2),
> ... -
- Fixed in changeset commit:"0ee37699a7d87e0d260f14e7b89db70662245ecf".
-
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > How @>@ works for strings?
>
> Um, isn't that obvious?
frankly... -
-
- Giovanni Manghi wrote:
> How @>@ works for strings?
Um, isn't that obvious? E.g. in an ordered list of (unique) nam... -
- What's wrong with the available @^@ operator?
-
2012-03-23
-
- I can't seem to read any line-string spatial tables from MSSQL 2008 R2
-
- Can you try a nightly build as this has already been added.
-
01:48 PM Bug report #5226 (Closed): Unable to select multiple features in new symbology
- Using old symbology, holding down the Apple key I can select multiple features and apply the same line or fill styles...
-
07:06 AM Bug report #5225 (Closed): Error for labeling with rule based renderer
- Hi,
I have a point shape layer with street names. The field 'name' often only contains the word "Weg" and I don't wa... -
05:10 AM Bug report #5224 (Closed): 'Merge selected features' tool creates invalid MULTIPOLYGON instead of...
- In some cases, 'Merge selected feature' tool creates invalid MULTIPOLYGON instead of possible single POLYGON geometry...
-
- Hi, my table is:...
-
- Hi Jurgen, thanks for the feedback.
Jürgen Fischer wrote:
> Do you mean "shouldn't make any sense"?
yes sorry
> ...
2012-03-22
-
12:42 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
- Hi,
what are the constraints in the table in Postgis. The error message sounds like a Postgis problem - not like a Q... -
- Do you mean "shouldn't make any sense"? But even then I don't understand what the problem with @"NUM_F" > '175'@ is ...
-
- I just noticed in qgis 1.7.4 and master that if I build a query like "DISTRITO" > 'FARO' or "NUM_F" > '175' (where "N...
-
- Fixed in changeset commit:"587b33821dde8343d188d5683d5b9e153528c963".
-
- In both 1.7.1 (which I used until yesterday) and 1.7.4, when I use vector:geoprocessing tools:intersect, known shapes...
-
- adding a note that Jurgen added a fix for this in commit:c065736b71f856c22814d2f29f248b88e442ae6e
Full fix could be ... -
10:03 AM Bug report #5222 (Closed): finding custom svg from project file assumes only on level of director...
- I've tested it in 1.7.4 and master.
In order to use a custom svg file I've dropped it into ~homedir/.qgis/svg/<custo... -
06:25 AM Feature request #5221 (Closed): Write QPJ file when defining CRS for layer
- If a layer is loaded that doesn't have an assigned CRS (eg a Shapefile without a PRJ) then depending on program optio...
-
02:57 AM Bug report #5210: QGIS freezes when editing via WFS-T
- No, I don´t. I use a fresh installation of GeoServer 2.1.3. I tried with a few of the standard layers and got the sam...
-
- johnrobot - wrote:
> I use http://localhost:8080/geoserver/wfs from GeoServer 2.1.3, so it isn´t a public URL.
do yo... -
- duplicate of #5219
-
- duplicate of #5219
-
- I believe you may want to look at the "CRS" tab in the general options, in particular the "coordinate reference syste...
2012-03-21
-
06:39 PM Feature request #5219 (Closed): Coordinate reference system for multiple shp file open
- Hi team,
first of all thank you so much to provide such a great tool in open source world!
QGIS 1.7.4 on window wan... -
- Hi team,
first of all thank you so much to provide such a great tool in open source world!
QGIS 1.7.4 on window wan... -
- Hi, I guess in the rule rendering, using the symbol level, when two feature are touching on a portion each-other and ...
-
- Yes this is really interesting.
Some the shapefile has max 255 chars and don't allow carriage returns.
I guess a si... -
- It would be very useful to allow save text annotation as shapefile (point layer) where the text of the annotations is...
-
- I use http://localhost:8080/geoserver/wfs from GeoServer 2.1.3, so it isn´t a public URL.
-
- can you post a public URL that causes the issue?
-
- I have tried with 1.9.90-alpha (qgis-dev) and I can confirm that the same problem occurs here as well. In fact, when ...
-
09:25 AM Feature request #5216 (Open): Modify default options in QGIS
- It would be nice if we could change default QGIS options.
For example, the default font used by QGIS composer on my ... -
- Hi,
in the field-calculator to fill a field of the attribute-table,
should be really useful a function like the
"rep...
2012-03-20
-
01:35 PM Bug report #5176: Wrong projections for custom CRS
- I can confirm this issue. It's well-described above. It has been around since at least June 2011. Layers shouldn't be...
-
- Proxy settings are ignored when trying to add a vector layer that is on the web, ie:
http://geonb.snb.ca/ArcGIS/re... -
- In the qgis calculator I notice miss the 10^ as invert of
log10.
-
- Can you please give a try to qgis-dev using osgeo4w? thanks.
-
- I add a WFS and go into edit mode. QGIS freezes when I edit a node in a line from a GeoServer localhost WFS and try t...
-
- Hi Alexandre,
the resulting table of attributes looks like the attached image (I'm using master on both linux and wi... -
- Hi Alexandre,
the resulting table of attributes looks like the attached image (I'm using master on both linux and wi... -
- Giovanni Manghi wrote:
> Can you please detail what should be the expected result with the attached sample data? tha... -
- Can you please detail what should be the expected result with the attached sample data? thanks.
Alexandre Neto wrote... -
- Is there any news about this problem?
I'm trying Union both in 1.7.4 and 1.9.90-Alpha QGIS code revision
f3b78ef, in... -
- In the Print Layout window, the right panel for images is much wider than others, and not resizable, so it does not f...
-
- Globe plugin is regularly crashing also my qgis (master, self packaged on debian, both testing and unstable):
warnin... -
- Added to master branch in commit c27c89045c172ae1afc68a5571552e145d426f15. Thank you René-Luc for this nice work!
To... -
02:28 AM Feature request #5094: QGIS Server Web Feature Service capabilities
> We, at 3Liz, would like to have WFS directly in QGIS Server like MapServer has, because we don't want to
> instal...-
> Quantum GIS - 1.7.4-Wroclaw 'Wroclaw' (exported)
>
> It doesn't have the fix.
if the fix was not backported to ...-
- The issue has been fixed, but if the fix was not backported then is available only in qgis-master.
-
- The issue has been fixed, but if the fix was not backported then is available only in qgis-master.
2012-03-19
-
03:14 PM Bug report #4050: GPSD Server WATCH request
- I've been using the RPM version for Fedora 15:
Quantum GIS - 1.7.4-Wroclaw 'Wroclaw' (exported)
It doesn't have the... -
- Joseph Wolf wrote:
> Is this fix applied yet?
if it wasn't backported you will need to install qgis-master -
- Is this fix applied yet?
-
- Is this fix applied yet?
-
02:49 PM Bug report #5207 (Rejected): Error handling null values (numeric, decimal)
- If postgres numeric, decimal fields are empty users can't enter number. Bug #4089 was closed but still exists in vers...
-
01:12 PM Bug report #4106: Error in join
- Dan - I encountered a similar issue. Windows doesn't like non-Admins to save things to the C:\\Program Files\\ direct...
-
12:35 PM Bug report #4521: Map Tips does not work with on the fly CRS transformation
- MapTips also displays the message "Maptips require an active layer" after user has selected a layer: the warning mess...
-
11:11 AM Bug report #5176: Wrong projections for custom CRS
- I can confirm this issue. Wish I'd seen this before I spend my morning tracking it down! Not only is this a display...
-
- Works randomly with errors like "IndexError: index out of range for array" or the resulting tiff has the wrong refere...
-
- * Activate OTF reprojection
* Create a grid based on the extent of a layer that is in a different SRS from that of th... -
- Duplicate #5014
-
- Duplicate #5014
-
07:13 AM Bug report #5203 (Closed): Attribute editor can not insert numbers into fields of type numeric(pr...
- If I have an attribute of type numeric (precision, scale) I can't insert a new field - simply put, no letters appear ...
-
05:47 AM Feature request #5094: QGIS Server Web Feature Service capabilities
- Hey it's opensource,
We, at 3Liz, would like to have WFS directly in QGIS Server like MapServer has, because we don'... -
- Hi,
> TinyOWS only works with PostGIS and does not use QDOM. Having WFS capabilities in Qgis brings more supported v... -
04:52 AM Feature request #5094: QGIS Server Web Feature Service capabilities
- The new patch attached (wfs-server-V4.patch) adds the capability to select the published layer in the WFS Service via...
-
- subject says it all
2012-03-18
-
- Thomas Arnold wrote:
> is that file ok?
Yes. Thanks. Applied in commit:6972cfa -
- Thomas Arnold wrote:
> is that file ok?
Yes. Thanks. Applied in commit:6972cfa -
- Hi,
is that file ok? -
- QGis trac is the wrong place to open ticket for non-core plugins.
I moved your ticket to the RT_Sql_layer plugin tr... -
- QGis trac is the wrong place to open ticket for non-core plugins.
I moved your ticket to the RT_Sql_layer plugin tr... -
- QGis trac is the wrong place to open ticket for non-core plugins.
I moved your ticket to the RT_Sql_layer plugin tr... -
- Hi,
When I choose, in the RT_Sql_Layer a db-connection on postgis,
I have this python error:... -
-
03:25 PM Feature request #5199: Relative paths for qgis server
- I was reading old tutorial perhaps.
Relative paths are working fine, thank you -
- Relative paths are already supported. What version/pla
tform are you using? -
- Hello all,
this is a feature request for qgis server. It wuold be very useful to have relative paths in qgis server i... -
- Hi,
I just tested qgis-server (master) under Windows/Osgeo4w.
I noticed that works all ok when using absolute paths... -
- I'm not sure what this mean and how I would try to replicate the issue. Can you try explain better (a step by step pr...
-
03:15 AM Bug report #5197 (Closed): Feature connectivity breaks in "project on the fly" editing
- There are micro-breaks into geometry connectivity when non-projected data edited in "project on the fly" and "snappin...
-
- I experienced a similar behaviour.
I have a DXF added as layer, I joined a table, I used a joined field as label size... -
- Fixed in master branch (commit 9f57650eafec1bfa2d66c76e174d0a6b90a0726a ).
2012-03-17
-
- I'm having this problem with QGIS 1.7.4 on MacOS 1.6.8. The bug was not present on 1.7.3 build.
Having a vector layer... -
- Yes, I can confirm this. It is only using the old labeling in layers properties.
A similar problem occurs in this ca... -
- Seems to me this is only with old labelling, not with the new one. Do you confirm?
2012-03-16
-
- The Hotlink plug-in suffers the same fate: ¿ would this be related or a different ticket ?
-
- Adding the x,y info. seems a good idea: the pointer tips, when hovering on the edit boxes, would be a handy place. No...
-
07:52 AM Feature request #1591: Coordinate capture plugin: lat/long reversed?
- I see there's been no movement on this :-(
It's a simple matter of usability it seems.
The user does not really care ... -
- If I Save as... a shp with another name (without the shp extension), and I check the option Add saved file to the map...
-
- subject says it all
-
- Fixed in changeset commit:"c5769bf3799c785ab90d4f37fa1a0c7fe88cfc3f".
-
- Exporting a Categorized style (new symbology) to SLD results in a sld document with a missing Filter tag.
-
- I've had this issue since 1.4 on XP and still with 1.7.4 on Win 7. Will see if I can find a way to record a video, th...
-
- Can not confirm, on Windows or Linux. Have never had this issue.
Can you upload a video? -
- In GUI lists, like the list of layer styles, a scroll wheel only scrolls the list down, regardless of the direction t...
-
- Nathan Woodrow wrote:
> Giovanni Manghi wrote:
> > sorry, I misunderstood the problem (well, I still do not understan... -
- Giovanni Manghi wrote:
> sorry, I misunderstood the problem (well, I still do not understand, by I obviously believe ... -
- Nathan Woodrow wrote:
> Giovanni don't be so hasty, this is related to deleting items not multiple styling of items. ... -
- Giovanni don't be so hasty, this is related to deleting items not multiple styling of items.
Deleting more one item... -
- multiple style classes selection and context menu (to change transparency,colour and unit) is available in qgis-master.
-
- multiple style classes selection and context menu (to change transparency,colour and unit) is available in qgis-master.
-
- Barring the existence of a QUERY panel that would allow one to write SQL to select the correct records, one's best op...
-
- Patrick Rickles wrote:
> Hi Giovanni,
>
> Could you notify the DB Manager developer about this issue (or let me know... -
- Patrick Rickles wrote:
> Hi Giovanni,
>
> Could you notify the DB Manager developer about this issue (or let me know... -
06:15 AM Bug report #5188: SPIT to carry over default privileges
- Hi Giovanni,
I've just downloaded PostGIS Manager (nice plugin!), but can verify the same issue with default access ... -
- Patrick Rickles wrote:
> Will the DB Manager carry over default access privileges? When will the DB Manager be availa... -
- Will the DB Manager carry over default access privileges? When will the DB Manager be available with a stable release...
-
- SPIT is not mantained and it will be discontinued as soon as DB Manager (that is also a replacement of PostGIS Manage...
-
- I am trying to set up a postgres/postgis database for multiple users (roles) to import shapefiles into and view/edit....
-
- Hi Thomas,
can you attach a patch made with "diff"?
Thomas Arnold wrote:
> Hi,
> can anybody check the following so... -
- Hi,
can anybody check the following solution for this problem?
QgsGPSInformationWidget::connectGps(){
...
//replace ... -
03:04 AM Bug report #5187 (Closed): Intersect tool should inform the user if both layers have a similar at...
- Currently the intersect tool does not check whether the the two layers have a similar fieldname title. In one case, ...
-
- A select all command is available from the SelectPlus plugin developed by Barry Rowlingson. Most of the other feature...
2012-03-15
-
11:18 PM Bug report #4821: Can't print in A0 size, used to work in QGIS 1.6
- I tested the qgis 1.7.4 BAD allocation problem on winxp with a collegue of mine. She frequently has this bad allocati...
-
- I tested the egis 1.7.4 BAD allocation problem on winxp with a collegue of mine. She frequently has this bad allocati...
-
- GoogleLayers plugin crash when QGIS strarts.
Content of the Python window report is attached -
- This is still not working on my QGIS version 1.7.4 Wroclaw: only works if on-the-fly CRS is off or set the same as da...
-
11:11 AM Bug report #5183 (Closed): Scale bar has wrong units for GeoJSON layer
- If I import a GeoJSON file as a layer in a new project, the scale bar shows units as "CM" and the bar length/distance...
-
-
09:17 AM Bug report #5151: OSGEO4W_ROOT not set correctly in Windows 2000
- Success! Your suggestion works. Thank you for helping me to continue to run the very very ancient Windows 2000.
-
- Steve Hartley wrote:
> Sorry - my programming ignorance. I thought %cd% meant the current dir.
> When I open qgis.ba... -
- Sorry - my programming ignorance. I thought %cd% meant the current dir.
When I open qgis.bat I get the echo:
OSGEO... -
- Steve Hartley wrote:
> qgis.bat (in C:\\OSGeo4W\\bin) sets the root dir to C:\\OSGeo4W, but then calls o4w_env.bat (a... -
- Forgot to say, I now get the same problem installing trunk, but haven't had this problem installing previous (1.7.3 &...
-
- qgis.bat (in C:\\OSGeo4W\\bin) sets the root dir to C:\\OSGeo4W, but then calls o4w_env.bat (also in C:\\OSGeo4W\\bin...
-
- This error already fixed. You can use master or wait for 1.7.5/1.8.0
-
- This error already fixed. You can use master or wait for 1.7.5/1.8.0
-
- My mistake - the original error was obtained using QGIS 1.7.3 (standalone install) on Win 7 64 bit. I can't reproduce...
-
- Not reproducible here with master and latest release-1_7. Please try and report
-
- Using the merge shapefiles command from fTools, if the 'Select by layers in the folder' option is checked, then despi...
-
- Fixed in changeset commit:"9151fd583b5062a4e085bba70364cd3c0a0c4885".
-
- It's working fine now that a new dev build is released.
One have still to remove double quotes from field name, but i... -
- Updating QGIS to 1.7.4-4 (MacOS) solved my problem.
I'm correctly visualizing rasters now. No need to change FcgidIOT...
2012-03-14
-
02:43 PM Bug report #5181 (Closed): fTools python error with option k=1 on 'Distance Matrix'
- When using the fTools plugin, 'Vector -> Analysis Tools -> Distance Matrix', if 'Summary Distance Matrix' is chosen w...
-
- Luiz Motta wrote:
> Concluded the step 3 (Add the raster toolbar with histogram stretch functions) and added the EPSG... -
12:09 PM Bug report #5163: points in polygon: does not count points on boundaries
- This is because it isn't programmed to test for intersections :-p The tool checks for containment: It uses QgsGeometr...
-
11:32 AM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
- Alister Hood wrote:
> I don't have QGIS here to test, but I'm wondering:
> - what happens if you divide two fields wi... -
- jekhor - wrote:
> Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my sys... -
- jekhor - wrote:
> Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my sys... -
- jekhor - wrote:
> Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my sys... -
- jekhor - wrote:
> Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my sys... -
- can you please attach a sample of the data that is causing the issue? thanks.
-
- Martin Dobias wrote:
> What property is data-defined - font size or buffer size?
buffer size
> Please note that Qt ... -
-
- Let's suppose an another user uses the third PC. He has never used unrecognised CRS and he has no customised CRS. If ...
-
- +*Background:*+
Any unrecognised CRS from maps are registered as a new Custom CRS with a new ID (starting from 10000... -
- No because ECW raster don't work with both Win and Linux version up to 1.7.1!
My solution for the moment : I export p... -
- Hi Jurgen
> Does that mean you checked if the CRS is found correctly in the database and the PROJ.4 string is what i... -
-
> P.S.: damn redmine, can't change ticket status to "Feedback".
try now -
> I use postgres 9.1.3 and postgis 2.0 beta2.
> Also I use qgis-dev (for windows ) 3a2c0e9.
>
> Andrea.
This may...-
- Not sure how hard it would be implementing such feature, but it would result in a huge improvement in vector renderin...
-
- An enhancement in this message window is a button to open the Snapping Options dialog directly.
-
- Confirmed, and causes a complete freeze here.
-
- Confirmed, and causes a complete freeze here.
-
- Confirmed, and causes a complete freeze here.
-
- Confirmed, and causes a complete freeze here.
-
- Confirmed, and causes a complete freeze here.
-
- Tested on latest 'release-1_7' branch.
-
- 'Field containing label' setting is lost each time when reopening project in case if label field is set from joined t...
-
- Fixed in changeset commit:"db1c401dd90e0e7ef6c7dc4e76113427dcfa32f1".
2012-03-13
-
- This was fixed in master in January (see commit:764e85b2b)
-
- This was fixed in master in January (see commit:764e85b2b)
-
- This was fixed in master in January (see commit:764e85b2b)
-
- This was fixed in master in January (see commit:764e85b2b)
-
- This was fixed in master in January (see commit:764e85b2b)
-
03:31 PM Bug report #5173 (Closed): Shape file field precision includes the . when saving, but not when ed...
- e.g. if an attribute field in a shapefile has precision = 2, when I edit it I can input values like 2.12, but when I ...
-
- What the subject says. I don't know if this is really a data provider plugin, or what.
I haven't tested if the same ... -
- > If I do this the results are shown with many decimal places, regardless of the precision of the output field!^:
> $... -
- Alister Hood wrote:
> I don't have QGIS here to test, but I'm wondering:
> - what happens if you divide two fields wi... -
-
- related/duplicated of #5121 ?
-
- related/duplicated of #5121 ?
-
- Hello
I just installed Qgis on my laptop running Win7 32bit Home Premium (amd c-60 apu)
After the creation of a bluet...
2012-03-12
-
- I don't have QGIS here to test, but I'm wondering:
- what happens if you divide two fields with precision 0 by each o... -
- Say the help for this (not currently implemented in Nathan's expression builder) is "a/b : a divided by b", change it...
-
- I am fine with the current behavior.
What do you suggest to make it more obvious to the user? -
01:09 PM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
- I m on a Pangolin nightly/live trying to run qgis and on top of what you get, i get
@
qgis.bin: /build/buildd/sip4-4.... -
- I am running QGIS version 1.7.4-1 on 64 bit Ubuntu 11.10. When I try to start QGIS the splash screen appears and the...
-
- Hi,
reinstalling msys the grass plugin is become available,
thx,
Andrea.
-
- Seems to be bug "OSGeo4W # 269":http://trac.osgeo.org/osgeo4w/ticket/269 for some reason a reinstall of msys is needed.
-
- Seems to be bug "OSGeo4W # 269":http://trac.osgeo.org/osgeo4w/ticket/269 for some reason a reinstall of msys is needed.
-
- Hi,
in the osgeo4w version of qgis-dev (r213138e) the plugin Gass is disappeared.
-
- Paolo Cavallini wrote:
> The attachment seems to have only a .prj file.
http://thematicmapping.org/downloads/TM_WORL... -
- The attachment seems to have only a .prj file.
-
- Luiz Motta wrote:
> Concluded the step 3 (Add the raster toolbar with histogram stretch functions) and added the EPSG... -
- Luiz Motta wrote:
> Concluded the step 3 (Add the raster toolbar with histogram stretch functions) and added the EPSG... -
02:36 AM Bug report #2465: Georeferencer: does not correctly handle files with existing georeferencing inf...
- I ran into this problem several times. This bug is a big problem for my work (planetary geology) and forces me to use...
-
- I mean importing DBF. Already possible through drag&drop?
-
- Already possible, by dragging & dropping multiple files, and also from file system. Only limitation: from file system...
-
- OK, got it: it is useful to add a password for database layers. It is OK as it stands. Thanks.
-
- Giovanni Manghi wrote:
> Jürgen Fischer wrote:
> > a bit vague. Did you check that the source and destination CRSes ... -
- Hi,
try to change the FcgidIOTimeout parameter (is a fastcgi modul parameter; see http://httpd.apache.org/mod_fcgid/m... -
- Results from points in polygon
are different than those obtained from R.
Results from qgis are always equal to or lo... -
- Vector/Analysis tools/Points in Polygon never ends for moderately complex
polygon layers such as the one provided as ... -
- Paolo Cavallini wrote:
> Please open a ticket on the osgeo4w trac
there is already "OSGeo4W !#232":http://trac.osgeo... -
- Please open a ticket on the osgeo4w trac
-
- Please open a ticket on the osgeo4w trac
-
- Can anyone udate the GEOS lib to 3.3 version in OSGeo4w? Actually the available version is 3.2.
Thanks to all -
2012-03-11
-
- Do you think it should stay like that?
Things like this should at least be made really obvious to the user... -
- If both numbers in division are integers, then integer division is used. If any of those numbers is a floating point ...
-
- What property is data-defined - font size or buffer size?
Please note that Qt has problems drawing bigger buffers - ... -
- Confirmed. The PAL library calculates centroids by itself (not using GEOS) and apparently that code is suspectible to...
-
- When I click 'Help' -> 'Check QGIS Version' I get a windows that tells me the version I am using. Even if it is the m...
-
08:49 AM Bug report #5159 (Closed): QGIS 1.7.4 with fTools : polygon centroids errors
- Hi,
I have upgrade QGIS from 1.7.3 to 1.7.4.
I was working on a project and I had to use the "polygon centroids" ... -
- Hi,
I have upgrade QGIS from 1.7.3 to 1.7.4.
I was working on a project and I had to use the "polygon centroids" ... -
01:34 AM Bug report #4011 (Reopened): Map canvas flickers when content is dragged
- Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my system. Confirmations?
-
- Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my system. Confirmations?
-
- Seems be fixed in current master (91da6af5acf4ea09218a495a1ea85dc0ccae267e).
-
- Seems be fixed in current master (91da6af5acf4ea09218a495a1ea85dc0ccae267e).
Also available in: Atom