Activity
From 2010-06-13 to 2010-07-12
2010-07-12
-
02:39 PM Feature request #2883: ECW support gdal 1.7
- Lutra,
Perhaps we can revisit the issue if/when Erdas offers their new 4.x SDK and see how involved the process is. ... -
02:16 PM Feature request #2883: ECW support gdal 1.7
- But Erdas is not releasing a new version of the ecw sdk as stated here?
http://www.erdas.com/Products/ERDASDownloads... -
- Erdas no longer distributes the ECW SDK DLLs required by the GDAL ECW Plugin. As such, I am hesitant to try and prov...
-
01:32 PM Feature request #2883 (Closed): ECW support gdal 1.7
- This is not a QGIS bug. And support for [[MrSID]] and python is also planned (see http://lists.osgeo.org/pipermail/o...
-
- This is not a QGIS bug. And support for [[MrSID]] and python is also planned (see http://lists.osgeo.org/pipermail/o...
-
01:22 PM Feature request #2883 (Closed): ECW support gdal 1.7
- Hi,
have installed 1.5.0 rel. 143 (codestand 13912M) from OSGeo4W. Starting Qgis, it appears a message, that gdal 1.... -
10:38 AM Feature request #2863: Patches to apply after version 1.5.0 is tagged
- Another thing to do is the consolidation discussed at the end of ticket #2882.
-
- I'd rather wait until after version 1.5.0 has been branched (aka, if it's not broken, don't fix it immediately before...
-
- I'd rather wait until after version 1.5.0 has been branched (aka, if it's not broken, don't fix it immediately before...
-
09:00 AM Bug report #2882: Python support broken for 64 bit systems
- I meant that it is defined, and used, within the project/cmake files, so it is available to use in source files. Go ...
-
- The second attached patch has been applied (commit:5baeed1c (SVN r13913)). The code for non-linux system remains unch...
-
- Replying to [comment:8 kyngchaos]:
> Replying to [comment:5 gjm]:
> > A question: should QGIS_LIB_SUBDIR be used for ... -
- Replying to [comment:5 gjm]:
> A question: should QGIS_LIB_SUBDIR be used for all systems, including the current two ... -
08:21 AM Bug report #2882: Python support broken for 64 bit systems
- The second patch is working for me, didn't try the first one.
-
- Replying to [comment:5 gjm]:
> A question: should QGIS_LIB_SUBDIR be used for all systems, including the current two ... -
- A question: should QGIS_LIB_SUBDIR be used for all systems, including the current two special cases in the code for M...
-
- Almost :) I think that the second attached patch will do it.
-
- Replying to [comment:2 volter]:
> Yes, the error message is:
>
> Warning: Couldn't load Python support library: Cann... -
- Yes, the error message is:
Warning: Couldn't load Python support library: Cannot load library /usr/lib/qgispython: (... -
- Can you give more details please?
Commit commit:576c0409 (SVN r13885) was developed and tested on my 64-bit [[OpenSU... -
- The patch for ticket #2618 introduced a static path to a library, that does not pay respect to 64 bit systems.
http:... -
07:34 AM Bug report #2292 (Closed): qgis saves .SHP file as .shp
- As it seems to be fixed in OGR (gdal 1.6.4), I guess that this bug can be marked as FIX cause it is not QGis related....
-
- As it seems to be fixed in OGR (gdal 1.6.4), I guess that this bug can be marked as FIX cause it is not QGis related....
-
- Here is a patch with my implementation.
What has been done:
*** You can verticaly and horizontaly align labels text.... -
- Well, it is not already implemented in legend but it works in labels (scales seems to be destroyed) in 1.4.0 !
So it...
2010-07-11
-
- I tried to code this enhancement. The attachement is a png file which shows what could be a centered (horizontally) l...
-
10:39 AM Feature request #2881 (Closed): Georeference's plugin have use translator text to COMPRESS argu...
- Use translator argument for gdalwarp string.
The string with command for
the option -co COMPRESS=[VALUE], use the t... -
06:00 AM Feature request #2845: QGIS won't compile with python
- I've done the best I can but I can't be sure on my operate because I'm not so skilled.
Please, cause I'm not a progr... -
- Replying to [comment:11 Alexbit]:
> I've try the suggest patch here and on bug 2678 but they don't solve.
> Moreover ... -
- I've try the suggest patch here and on bug 2678 but they don't solve.
Moreover with google I've found some ideas but ... -
- Replying to [comment:7 Alexbit]:
> I-ve search over the internet and Ive try all the proposed workaround but no one w... -
02:13 AM Feature request #2845 (Open): QGIS won't compile with python
-
- I'm sorry but I still that is an unsolved ticket.
Qgis won't build python support on any machine that have sip 4.10.x... -
- I'm sorry but I still that is an unsolved ticket.
Qgis won't build python support on any machine that have sip 4.10.x... -
05:05 AM Feature request #2878 (Closed): WFS client doesn't remember the last server used
- Fixed in commit:15df931e (SVN r13907)
-
- Fixed in commit:15df931e (SVN r13907)
-
- Ok, there is now an option to disable raster icons in case of performance problems (btw., those icons are 32x32 )
-
- Ok, there is now an option to disable raster icons in case of performance problems (btw., those icons are 32x32 )
-
03:08 AM Bug report #2880 (Closed): makefiles not parallel building proof
- In times of multi-core machines it is not too uncommon to compile projects like QGIS with "make -j9" or even higher. ...
2010-07-09
-
- Replying to [comment:1 ctimko]:
> Are you using qgis 1.4 or the trunk version?
tested both, qgis 1.4 from ubuntugis... -
06:46 AM Bug report #2877: menu icons do not show under Ubuntu 10.04
- Are you using qgis 1.4 or the trunk version?
-
- fixed in commit:f1c90149 (SVN r13904).
-
- fixed in commit:f1c90149 (SVN r13904).
2010-07-08
-
- It was already pointed out in #2845
that *if ( splitterState != QVariant::QVariant() )* should be *if ( splitterStat... -
- Here's my notes, for the record:
It seems to only affects rasters without overviews. I did a test with a single 1 G... -
> Why should QGIS draw an icon that represent a, for example, 5000x5000 pixel raster in a space of 16x16?
because ...-
06:55 AM Bug report #2876: bring back raster legend icons
- For me icons for raster image are not too useful.
Why should QGIS draw an icon that represent a, for example, 5000x5... -
- Icons have been disabled in r13899 because of performance problems while opening projects with many rasters.
Icons a... -
- So then, 3 different orders...Sort by File Extension, File Type Name, or Popular?
-
- after adding a wfs layer, if a user needs to add another layer from the same server, when opening again the client it...
-
- Under Ubuntu 10.04, with both qgis 1.4 installed from repository or self compiled, menu icons do not show, including ...
2010-07-07
-
11:38 AM Bug report #2865: QGIS crashes if border style differ from Solid Line and scale is very high
- I've try to generate backtrace on windows using qgis-dev package and gdb. Results attached (yes, I know that isn't mu...
-
- Replying to [comment:9 wonder]:
> A backtrace can be obtained by running the application in debugger (e.g. gdb) or by... -
03:00 AM Bug report #2865: QGIS crashes if border style differ from Solid Line and scale is very high
- Replying to [comment:8 dr]:
> Replying to [comment:7 wonder]:
> > Is it possible for you to produce a backtrace?
> Of...
2010-07-06
-
12:30 AM Bug report #2875 (Closed): Unit list in MapServer Export plugin is untranslatable
- see attachment
-
- Replying to [comment:7 wonder]:
> Is it possible for you to produce a backtrace?
Of course: [http://pastebin.ca/1895889] -
- Is it possible for you to produce a backtrace?
-
10:27 PM Bug report #2865: QGIS crashes if border style differ from Solid Line and scale is very high
- I confirm that on commit:37a815ed (SVN r13891)
-
- Yes, sorry I've realized that after posting.
It seems that this is a Qt bug. It would be good to try with newer Qt r... -
- If 'Fix problems with incorrectly filled polygons' option is on then 'Make lines appear less jagged at the expense of...
-
- Oh it is. We're sorry.
-
- Oh it is. We're sorry.
-
- Isn't this a combined duplicate of #2796 (wrong printing output) and #2113 (only few curved labels are drawn) ?
-
02:35 PM Bug report #2871 (Closed): bad curved label behaviour on print
- Use curved placement for labels, in the print composer labels look correct. The problem is incorrect result on print ...
-
- I confirm the same problem on Ubuntu 9.10. If affects printouts, pdfs (rasterized and not), svg and raster images.
-
- Even on simpler lines, as streets, the curvature threshold seems too low. I can imagine much more curved labels would...
-
- The following window is currently untranslatable.
-
04:56 PM Bug report #2873 (Closed): GPX files show empty attribute table
- I closed this as it appears to be some form of corruption with the CRS on an older project file. Recreating the proje...
-
- I closed this as it appears to be some form of corruption with the CRS on an older project file. Recreating the proje...
-
- Although I can see attributes with the 'Identify Features' tool, opening the attribute table for a gpx layer shows no...
-
- Replying to "ScottParker":/issues/show/2772:
> gpx files show only points not lines
Adding a gpx file via drag and d... -
- Replying to "ScottParker":/issues/show/2772:
> gpx files show only points not lines
Adding a gpx file via drag and d... -
- Hello,
the new core function labeling "abc" is absolutly best.
In extrem situations, it seems to have a malfunction.... -
12:21 PM Bug report #2870 (Closed): mapserverexportplugin: qgis segfault when plugin used with unsaved pro...
- Build Qgis Trunk on Ubuntu 9.10
When just opening a shp-file in qgis or a postgis layer, and immediatly open de maps... -
- mostly fixed in commit:4cec6fe1 (SVN r13895)
styles for mapserver and qgis are more in line now, thought there is st... -
- mostly fixed in commit:4cec6fe1 (SVN r13895)
styles for mapserver and qgis are more in line now, thought there is st... -
- fixed in commit:295f1e09 (SVN r13894).
-
- fixed in commit:295f1e09 (SVN r13894).
-
- Attached is a patch that fixes a spelling error I discovered in the comments (it's not huge, just annoying). I also m...
-
- Sorry for the delay. For my cmake builds, it is still true. I do not know what might be different that would cause th...
-
- One new feature that would be good is the support of label alignment in the composer.
When you have created a label,... -
- One new feature that would be good is the support of label rotation in the composer.
For the moment you can rotate p... -
- I'm unable to reproduce to reproduce on Ubuntu 10.04 64-bit, Qt 4.6.2
2010-07-05
-
- I'm unable to reproduce on ubuntu 10.04 64-bit, Qt 4.6.2.
Does it crash when 'Fix problems with incorrectly filled p... -
- Make lines appear less jagged at the expense of some drawing performance must be enabled!
-
- More simple approach to get crash:
1. Open any polygonal layer;
2. New Symbology: Fill Style -> No Brush, Border St... -
- 1. Open any polygonal shapefile (see attachment);
2. New Symbology: Fill Style -> No Brush, Border Style -> Solid Li... -
- Make lines appear less jagged at the expense of some drawing performance must be enabled.
-
- Open any vector layer. Set border style (new symbology) to any value differ from Solid Line, for example Dot Line. Se...
-
- fixed in commit:37a815ed (SVN r13891).
-
- fixed in commit:37a815ed (SVN r13891).
-
09:20 AM Bug report #2864 (Closed): Qgis crashes when new classification value has been added
- When new value was added to classification list in categorized symbolizer and edited, qgis crashed.
Steps to reprodu... -
- Replying to "graupel":/issues/show/2842:
> Hello, whenever I attempt to use the Print Composer function with OSX 10.5... -
-
05:57 AM Bug report #2618: Settings->Options -> assertion failing
- Fix confirmed, thanks !
-
- commit:6e06848f (SVN r13890) fixes the crash. You need however zoom-in a few times to see the raster.
-
- commit:6e06848f (SVN r13890) fixes the crash. You need however zoom-in a few times to see the raster.
-
02:55 AM Bug report #2275: Layer units and measuring
- The unit in the total box changes immediately after hitting OK in Project Properties window, however, the subtitle "S...
2010-07-04
-
- The bug doesn't appear on up-to-date Debian testing, with self-compiled qgis commit:d4195f3d (SVN r13851).
-
- Fixed in commit:d0625ef2 (SVN r13888).
For numbers over 99999.0 (or under -99999), the format will never be scienti... -
- Fixed in commit:d0625ef2 (SVN r13888).
For numbers over 99999.0 (or under -99999), the format will never be scienti... -
- Fixed in commit:75a8fc89 (SVN r13887). Also added a couple more conversion options over what was originally supported...
-
- Fixed in commit:75a8fc89 (SVN r13887). Also added a couple more conversion options over what was originally supported...
-
11:04 AM Feature request #2735 (Closed): fTools: random selection issues
- Apologies for delay in fixing final issue! Patch applied in commit:771fe9aa (SVN r13886).
Thanks to brushtyler!
Carson -
- Apologies for delay in fixing final issue! Patch applied in commit:771fe9aa (SVN r13886).
Thanks to brushtyler!
Carson -
- This problem may be fixed in commit:576c0409 (SVN r13885). Please try and report back.
-
- Fixed in 13883.
-
- Fixed in 13883.
-
- Attached are some non-urgent changes that can applied after 1.5.0 is tagged. I've placed the patch here so that I don...
2010-07-03
-
05:45 PM Feature request #2735: fTools: random selection issues
- Attached a patch to fix the random selection within subsets (the second issue).
Now we can finally close this ticket! -
- Replying to [comment:5 pcav]:
> Tested again on commit:cc8ba684 (SVN r13876), same error:
As alexbrui had reported by... -
- Replying to [comment:8 lutra]:
> Maybe the recent patches by Giuseppe for the legend also fixed this?
seems so, so ... -
- Replying to [comment:8 lutra]:
> Maybe the recent patches by Giuseppe for the legend also fixed this?
seems so, so ... -
- add a vector and style it with the new symbology -> categorized
try change the color ramp -> hit "classify"
the col...
2010-07-02
-
- tested with
http://www.igeo.pt/gdr/Downloads/ProdutosCLC/CLC06_PT.zip
it is also not very intuitive to have to go p... -
- see also #2182
-
- I think the summary says it all.
-
- it would be really useful to allow users define labels using the values of a column in the table of attributes.
It ... -
- Replying to [comment:15 vesnikos]:
> Replying to [comment:14 lutra]:
>
> >
> > I can compile every day qgis with GR... -
08:21 AM Feature request #2785: [Cmake] FindGRASS.cmake issue
- Replying to [comment:14 lutra]:
>
> I can compile every day qgis with GRASS support using GRASS installed with the ... -
> hence if you install grass60rc6 from ubunbugis/unstable you're not able to compile qgis with grass support.
I can...-
- Its been a while, it has something to do with the packages' "include" folder.If i remember correctly the binary packa...
-
- Replying to [comment:11 vesnikos]:
> and the third and most major: The grass60RC6 package that comes from ubuntus' ub... -
- Should have closed that bug ages ago.
Problem lies that in clarification in the documentation: Nowhere states that ... -
- Should have closed that bug ages ago.
Problem lies that in clarification in the documentation: Nowhere states that ... -
- large prints or image exports might be so memory extensive, that the temporary image is too large and produces an emp...
-
08:26 AM Feature request #2735 (Feedback): fTools: random selection issues
- Tested again on commit:cc8ba684 (SVN r13876), same error:
An error has occured while executing Python code:
Traceba... -
- Tested again on commit:cc8ba684 (SVN r13876), same error:
An error has occured while executing Python code:
Traceba... -
-
- the fix seems to introduce a problem with some [[PyQt]] versions. commit:6c79e997 (SVN r13877) adds a group box inst...
-
- the fix seems to introduce a problem with some [[PyQt]] versions. commit:6c79e997 (SVN r13877) adds a group box inst...
-
please test:
the ms_export.py above should replace the version you have in (on linux):
[yourqgis install dir]/sha...-
- Upd.
4. Choose Pan Map or Zoom In or Zoom Out or maybe any another tool... -
- 1. Open raster layer;
2. Choose Measure Line or Measure Area tool and get an error message:...
2010-07-01
-
01:07 AM Bug report #2411 (Closed): FTBFS: qgsgrass.cpp + old grasses on Debian/Lenny
- ok, I had run "debuild clean" but I guess it missed those old files.
"svn status" showed that debian/qgis-plugin-gra... -
- ok, I had run "debuild clean" but I guess it missed those old files.
"svn status" showed that debian/qgis-plugin-gra... -
- Replying to [comment:16 hamish]:
> attached debuild log showing dh_makeshlibs error to ticket. see:
Remove the symbo... -
- attached debuild log showing dh_makeshlibs error to ticket. see:...
-
- Replying to [comment:14 jef]:
> Replying to [comment:12 jef]:
> > That's not a link error. dh_makeshlibs complains a... -
- Replying to [comment:15 aperi2007]:
> Yes I tested it even on another machine always on windows.
> It is here.
>
> I... -
- Replying to [comment:15 aperi2007]:
> Yes I tested it even on another machine always on windows.
> It is here.
>
> I... -
03:23 PM Bug report #2797: Change EPSG for a WMS Layer
- Yes I testeed it even on another machine always on windows.
It is here.
I discovered hovewer that it happened only w... -
09:43 AM Bug report #2856 (Closed): Grass toolbox filter input isn't labelled
- If you open the GRASS tools and choose the module list tab, there's a text input field below the list which filters t...
-
- Is there a need to bundle the Qt-translations?
-
- flex or bison does this.
-
- flex or bison does this.
-
- rpmlint, a program for checking problems in rpm packages tells me the following:
_shared-lib-calls-exit /usr/lib64/l...
2010-06-30
-
- hopefully "fixed" in commit:6b0a6e92 (SVN r13865) (see also #2239)
-
- hopefully "fixed" in commit:6b0a6e92 (SVN r13865) (see also #2239)
-
- And...
1. Open any vector layer, toggle editing;
2. Choose Reshape Features tool and start _quickly_ to click in the... -
- The same problems:
1. Choose Split Features tool and click right button anywhere in View;
2. Get an error 'An error... -
- 1. Create new polygonal vector layer;
2. Create polygon and draw ring (by Add Ring tool) within it.
3. Try to draw ... -
- Yes, it is still true.
-
- fixed in commit:6f3384df (SVN r13861) and commit:9c2efef7 (SVN r13862)
Carson -
- fixed in commit:6f3384df (SVN r13861) and commit:9c2efef7 (SVN r13862)
Carson -
- Replying to [comment:3 pcav]:
> Got a different error:
>
> Traceback (most recent call last):
> File "/usr/share/qgi... -
- fixed in commit:9060b5a9 (SVN r13860)
-
- fixed in commit:9060b5a9 (SVN r13860)
-
- vesnikos, any news on this? Looks more like a GRASS installation problem on your end (missing version.h).
-
- Replying to [comment:12 jef]:
> That's not a link error. dh_makeshlibs complains about missing symbols in the shared... -
- applied in commit:4eae64a8 (SVN r13858). Thanks.
-
- applied in commit:4eae64a8 (SVN r13858). Thanks.
-
- Replying to [comment:13 aperi2007]:
> I tried to re-install completely qgis, also removing settings from windows regi... -
- applied in commit:32aed70c (SVN r13857). Thanks.
-
- applied in commit:32aed70c (SVN r13857). Thanks.
-
- fixed in commit:121931ba (SVN r13856).
-
- fixed in commit:121931ba (SVN r13856).
-
- fixed in commit:8b729f30 (SVN r13855).
-
- fixed in commit:8b729f30 (SVN r13855).
-
- Confirmed here; qgis from trunk on Debian unstable, self compiled. Chrash message is:
Floating point error -
- Not quite sure whether [[MinGW]] compilation is still supported
-
- More options for chart decorations would also be important.
-
- fixed in commit:6ddd5e94 (SVN r13854).
-
- fixed in commit:6ddd5e94 (SVN r13854).
-
- oh wait wait wait, corrections
a) they do show up
b) if I restart QGIS they are already in panels and I don't really... -
- the way they work is, when you click on them, they appear in the panels, but are switched off, not very intuitive
-
- Any items of View menu doesn't work (see attachment).
I guess that 'Tile scale slider' the same as 'Panels'->'Tile s... -
- The "GPS tracking plugin" isn't a core plugin. Please report to Bob Bruce.
-
- The "GPS tracking plugin" isn't a core plugin. Please report to Bob Bruce.
-
08:09 AM Bug report #2851 (Closed): Untranslatable GPS tracking window
- The following window is currently untranslatable. Please fix!
[[Image(http://gis-lab.info/forum/download/file.php?id... -
- fixed in commit:10a4a67c (SVN r13852).
-
- fixed in commit:10a4a67c (SVN r13852).
-
- 1. Open any vector layer and enable OTFT;
2. Set preferred measurement units to 'Meters';
3. Start to measure line;...
2010-06-29
-
- Confirmed here (Windows, commit:c4f611c7 (SVN r13819)).
-
- 1. Open any vector layer;
2. Choose Pan Map tool and click right button of mouse in the View area. All works fine - ... -
- fixed in commit:3efd24b0 (SVN r13850).
-
- fixed in commit:3efd24b0 (SVN r13850).
-
10:59 PM Bug report #2674: wms getfeatureinfo does not work against geoserver
- Here we go:
http://www.catais.org/geoserver/wms
try the catais:control_point layer. -
- commit:de1c4945 (SVN r13847) should be the real fix.
-
- Replying to [comment:2 alexbruy]:
> Seems, this bug related with changes introduced in , before this revision all wor... -
- Replying to [comment:2 alexbruy]:
> Seems, this bug related with changes introduced in , before this revision all wor... -
- Seems, this bug related with changes introduced in , before this revision all works fine.
Check geometry validity r... -
- from mailinglist: http://lists.osgeo.org/pipermail/qgis-user/2010-June/009024.html
- for lines, it takes the color f... -
- fixed in commit:06f15b15 (SVN r13845)
it appears that it's not a typical postgres problem, but a problem of qgis lay... -
- fixed in commit:06f15b15 (SVN r13845)
it appears that it's not a typical postgres problem, but a problem of qgis lay... -
- see http://lists.osgeo.org/pipermail/qgis-developer/2010-June/010346.html
it appears that 2 postgres layers with the... -
- Replying to [comment:12 jtornero]:
> 2) Then I've moved away (to a subfolder in
> /opt/PostgreSQL/8.4/lib/libcrypto.s... -
- Replying to [comment:12 jtornero]:
> 2) Then I've moved away (to a subfolder in
> /opt/PostgreSQL/8.4/lib/libcrypto.s... -
09:38 AM Bug report #2475: Segmentation Fault in 1.4, opensuse 11.2
- Replying to [comment:11 jtornero]:
> Replying to [comment:10 jef]:
> > Replying to [comment:9 jtornero]:
> > > Well, ... -
- Loading the small geoTIFF from here:
http://www.maths.lancs.ac.uk/~rowlings/crashqgis.tif
into Qgis causes it to cr... -
- see also #2845
-
- Replying to [comment:5 Alexbit]:
> I'm sorry but, probably, I was not clear in the exposition of the problem.
Ah ok,... -
- Replying to [comment:5 Alexbit]:
> I'm sorry but, probably, I was not clear in the exposition of the problem.
Ah ok,... -
- I'm sorry but, probably, I was not clear in the exposition of the problem.
As I say in the firsy post, there's no pro... -
- strange... you are right.
It does work with a new project, using an old imported from 1.4.0 does not...
closing thi... -
- strange... you are right.
It does work with a new project, using an old imported from 1.4.0 does not...
closing thi...
2010-06-28
-
- Replying to [comment:3 Alexbit]:
> If it's usefull for you:
> This is the output of ccmake for stable (1.0.x):
<pre... -
- If it's usefull for you:
This is the output of ccmake for stable (1.0.x):
The C compiler identification is GNU
The ... -
- Do you get any error messages or terminal output? Which Qt, [[PyQt]]4 and SIP version is [[ArchLinux]] using? It mi...
-
- If you try to compiling any version of qgis diffrent from svn trunk on Archlinux (Linux 2.6.34-ARCH #3905 SMP PREEMPT...
-
- Subj.
-
- 1. Create new polygonal layer;
2. Draw one polygon (e.g. triangle);
3. Vector -> Geometry Tools -> Check geometry v... -
- try also a dev build
http://www.kyngchaos.com/software:qgis
and report if it still crashes. -
05:10 PM Bug report #2842 (Closed): OSX Print Composer Crash
- Hello, whenever I attempt to use the Print Composer function with OSX 10.5.8 and QGis 1.4.0 it crashes. I've tried va...
-
- Replying to [comment:5 trapanator]:
> Sorry for my late response.
>
> It still doesn't work in latest trunk:... -
-
- Sorry for my late response.
It still doesn't work in latest trunk:
1. load a point shapefile
1. open the layer pr... -
- Sorry for my late response.
It still doesn't work in latest trunk:
1. load a point shapefile
1. open the layer pr... -
- Replying to [comment:10 jef]:
> Replying to [comment:9 jtornero]:
> > Well, I've upgraded to KDE 4.4 but I still have... -
- Replying to [comment:9 jtornero]:
> Well, I've upgraded to KDE 4.4 but I still have the problem. I don't know where t... -
- Replying to [comment:8 vinhussey]:
> Replying to [comment:7 jtornero]:
> > I'm so sorry I haven't answered yet, among... -
03:41 AM Feature request #2841 (Closed): More options for chart decorations
- Hello,
I'd like to have my pie charts surrounded by a line (e.g. black, 1 pixel wide).
(Especially if one the parts ...
2010-06-27
-
- Replying to [comment:6 lutra]:
>
> > Ok. With GDAL 1.7 from experimental I can add the the layer. Is there a
> > s... -
- Replying to [comment:6 lutra]:
>
> > Ok. With GDAL 1.7 from experimental I can add the the layer. Is there a
> > s... -
> Ok. With GDAL 1.7 from experimental I can add the the layer. Is there a
> sample set with multiple rasters?
I ...-
- Replying to [comment:4 lutra]:
> Replying to [comment:3 jef]:
> > We don't have support for rasterlite. So it's an u... -
- Hi,
Replying to [comment:3 jef]:
> We don't have support for rasterlite. So it's an unsupported datasource.
well... -
- We don't have support for rasterlite. So it's an unsupported datasource.
When I try to add spatialite layers using ... -
-
-
-
-
-
- Replying to [comment:8 jef]:
> Replying to [comment:7 lutra]:
> > I guessed that was a problem in one of the shapefil... -
- Replying to [comment:8 jef]:
> Replying to [comment:7 lutra]:
> > I guessed that was a problem in one of the shapefil... -
- Replying to [comment:7 lutra]:
> I guessed that was a problem in one of the shapefiles, nevertheless it should not cr... -
- I guessed that was a problem in one of the shapefiles, nevertheless it should not crash.
PS
I'm using GDAL 1.7 -
- Confirmed QGIS crash on Slackware linux. Under Windows XP merging the following files works fine.
But on Linux QGIS c... -
10:00 AM Bug report #2023: attribute table fails to display all rows after editing vector layer
- Replying to [comment:7 lutra]:
> Replying to [comment:6 stevehartley]:
> > Any ideas?
>
>
> try another pc (and/or...
2010-06-26
-
- Replying to [comment:4 jef]:
> Replying to [comment:3 jef]:
> > oh, any plugins involved?
>
> like SDA4PP?
I remov... -
- Replying to [comment:3 jef]:
> oh, any plugins involved?
like SDA4PP?
-
- Replying to [comment:2 jef]:
> not reproducable on Debian unstable. Do you have a backtrace?
oh, any plugins involved? -
- Replying to "lutra":/issues/show/2837:
> merging the following shapefiles under linux (Ubuntu 10.04) causes qgis to c... -
- sorry, forgot to add the download link
http://www.faunalia.pt/downloads/cart_2.tar.gz
-
- merging the following shapefiles
under linux (Ubuntu 10.04) causes qgis to crash... -
- I removed SDA4PP and the messages changes slightly, but sI still have a crash.
if using "add raster layer" I get
"/... -
- Are you using SDA4PP? Seems like that it intercepts GDAL errors, but crashes when one happens.
See also #2829 and ... -
- Steps:
create an empty SL db trough qgis, then try to add it trough "add vector layer" or "add raster layer", it wil... -
- fixed in commit:34335d58 (SVN r13809).
-
- fixed in commit:34335d58 (SVN r13809).
-
- Replying to [comment:3 jef]:
> Create a spatialite layer, click the '...' button next to the database combobox and se... -
- Replying to [comment:3 jef]:
> Create a spatialite layer, click the '...' button next to the database combobox and se... -
- Create a spatialite layer, click the '...' button next to the database combobox and select the name of the new database.
-
- Replying to [comment:1 jef]:
> creating empty spatialite database is already possible.
sorry for missing that, but.... -
- creating empty spatialite database is already possible.
-
- I would like to ask if it would be possible to add a feature to allow create spatialite dbs from scratch and add exis...
-
- Tested with rasterlite sample datasets.
Add a rasterlite db (containing just one layer, otherwise you'll hit #1040) ... -
- The radiobuttons don't work correctly: "Regular points" offers radio buttons "Input Boundary Layer" and "Input Coordi...
-
- there is not clip tool among the gdal utilities, clipping is done using gdal_merge.
-
- there is not clip tool among the gdal utilities, clipping is done using gdal_merge.
-
- I cannot reproduce this bug. Is it still true?
2010-06-25
-
03:24 PM Bug report #2835 (Closed): Clipper help in GDAL Tools
- Clipper help in GDAL Tools links to web page with merge function.
-
2010-06-24
-
- Not exactly. With radio buttons you need to selected exactly one option. With the rendering option you can select e...
-
- Not exactly. With radio buttons you need to selected exactly one option. With the rendering option you can select e...
-
- Settings -> Options -> Rendering & SVG -> Rendering quality. The behavior of options looks like radio buttons, but ch...
-
08:07 AM Bug report #2475: Segmentation Fault in 1.4, opensuse 11.2
- Replying to [comment:7 jtornero]:
> I'm so sorry I haven't answered yet, among other things a new little human being ...
2010-06-23
-
- fixed in commit:08439990 (SVN r13793).
-
- fixed in commit:08439990 (SVN r13793).
-
- I've added configuration ability for a custom build of Qt in , so a PPC cocoa Qt can be compiled and used. This is a...
-
- fixed in .
-
- fixed in .
-
- See the shapefiles attached in ticket #2829.
It has an invalid geometry but the tool fails to check the error. -
- New description:
See attached polygon shapefile. It has an invalid geometry and if you try to split it qgis does not...
2010-06-22
-
12:37 AM Feature request #2832 (Closed): rule-based renderer in symbology-ng should show rules in legend
- The rule-based rendered is a great addition to the new symbology system. It's an effective replacement for the old sy...
-
11:17 PM Bug report #2831 (Closed): No module names qgis.core
- Hi, just tried to compile again, but now after first having removed QGIS 1.4 completely, including /usr/local/share/...
-
- Hi, just tried to compile again, but now after first having removed QGIS 1.4 completely, including /usr/local/share/...
-
- Please paste what files are contained in this directory: /usr/local/share/qgis/python/qgis
When configuring the comp... -
- I have compiling QGIS 1.5 (trunk) on Ubuntu 10.04. However, when starting QGIS, I am getting the following error mess...
-
04:10 PM Bug report #2829: qgis doesn't show any message/warning when splitting a polygon with an invalid ...
- Sorry about the bad geometry file I hadn't noticed that, and I can confirm Lutra is correct, once I fixed the geometr...
-
- Right: uninstalling SDA4PP plugin removes the crash. A meaningful erro message would be good to have anyway.
-
11:47 AM Bug report #1697: Does not install on vista 64
- "Weren't aware..." not "Weren't unaware..." :)
-
- It works when "Run As Administrator" is selected for the installer instead of running it as a regular Administrator u...
-
- Replying to [comment:8 spatialminds]:
> FYI... Version 1.0.2 is what is made available on the QGIS Download page.
ye... -
- Replying to [comment:7 spatialminds]:
> No, I didn't run the installer as Administrator. I'll give it a try and post... -
- Please use 1.4 or 1.5 installer. 1.0 is no longer supported, and will be dropped soon.
BTW, OSGeo4W AFAIK installs ev... -
- Please use 1.4 or 1.5 installer. 1.0 is no longer supported, and will be dropped soon.
BTW, OSGeo4W AFAIK installs ev... -
- FYI... Version 1.0.2 is what is made available on the QGIS Download page.
-
- No, I didn't run the installer as Administrator. I'll give it a try and post back.
I am a developer, and would pref... -
- can you also test the osgeo4w installer? thanks
by the way... the osgeo4w installer will install also qgis 1.4/1.5 y... -
- did you run the installer as "administrator"?
-
- Tested against the current 1.0.2 LTS version.
Yes, this is the same as bug #1766. The description in 1766 is exac... -
- Tested against the current 1.0.2 LTS version.
Yes, this is the same as bug #1766. The description in 1766 is exac... -
- Added patch to fix first issue (selecting a number of features)
-
- this should be fixed, reopen if necessary.
-
- this should be fixed, reopen if necessary.
-
- Replying to [comment:5 lutra]:
> Giuseppe, a quick test and I cannot see jumps... let assume this is fixed. I'll reop... -
- Replying to [comment:5 lutra]:
> Giuseppe, a quick test and I cannot see jumps... let assume this is fixed. I'll reop... -
02:36 AM Feature request #2830 (Closed): symbology: add option to sort size-scaled symbols with largest at...
- When using an attribute column to scale symbol sizes according to their attribute value, there should be an option to...
2010-06-21
-
- So we got another problem now: I suspected the layer was invalid, so I checked with fTools, which it couldn't find th...
-
- Replying to [comment:2 pcav]:
> Confirmed. In my case, it crashes with:
No crash here.
> Error:
>
> GDAL Error 1... -
- see attached image. The geometry does not seems correct. Fix it and the tool will work fine.
-
- Confirmed. In my case, it crashes with:
Error:
GDAL Error 1: [[TopologyException]]: found non-noded intersection ... -
- While editing a shape file, trying to split the feature has no affect. Trying to split the same shape file with v1.2....
-
- After installing the [[OpenStreetMap]] plugin I'm having this error every where open and close shapefiles.
I think i... -
- Sorry, CMAKE_INSTALL_PREFIX was set to /tmp/qgis, which didn't exist, and after 'make install' it does exist and cont...
-
- Done, rm -rf build; mkdir build; cd build ccmake -DCMAKE_INSTALL_PREFIX=/tmp ../qgis && make && make install
Same pr... -
- ...
-
- Cleaning up ~/extra/lib/qgis and ~/extra/lib/libqgis* didn't help.
Still startup message and crash. Startup message:
... -
- Btw. python console is available only if qgis python bindings have been successfully loaded, it is available in menu ...
-
- QGIS automatically adds the path where the bindings have been installed, so there's no need to alter PYTHONPATH.
Als... -
You seem to be affected by an issue that installation prefix is empty - this is typically caused by having some fil...-
- There are old qgis headers installed in /usr/include/qgis
Not a privileged user on this host, so can't check if remov... -
- another note, the ~/extra/lib/python path came from my own env variable PYTHONPATH.
Unsetting it still fails to find ... -
- Note: bindings are actuall installed in ~/extra/share/qgis/python
Built with -DCMAKE_INSTALL_PREFIX=/net/lafont/home/... -
- Still valid as of commit:42c15549 (SVN r13764)
Note that qgis was installed in non-standard directory (~/extra)
and ... -
04:57 AM Bug report #2714: Crash when resizing map window with Qt 4.6
- Replying to [comment:6 jef]:
> workaround fixes the crash.
No. It doesn't. Can't get backtrace, as running under GDB ...
2010-06-20
-
12:05 AM Feature request #2824: label color lost when canceling
- Replying to [comment:3 wonder]:
> fhof: what's your real name? To give you the credits if the patch will be applied.
... -
- fhof: what's your real name? To give you the credits if the patch will be applied.
-
- duplicate of #2361
-
- duplicate of #2361
-
01:11 PM Feature request #2827 (Closed): Disable possibility to move Layer Properties icons
- Layer Properties icons (left side of form window) can be moved. They can be moved to nasty bunch of icons - see scree...
-
- Let's keep this bug closed since the reported problem has been solved.
-
- Let's keep this bug closed since the reported problem has been solved.
-
- Yes, it is fixed. Thanks, Martin!
-
- Should be fixed in commit:52a49c90 (SVN r13752).
-
- Should be fixed in commit:52a49c90 (SVN r13752).
-
- Is the bug still valid?
If it is, try to open Python console in QGIS and type:... -
- This could have been fixed recently in commit:52a49c90 (SVN r13752), please test again.
If the problem persists, ple... -
- Fixed in commit:3925a089 (SVN r13757).
I took the liberty and set the license of all CMake modules to BSD. -
- Fixed in commit:3925a089 (SVN r13757).
I took the liberty and set the license of all CMake modules to BSD. -
- fixed in commit:fdecdf92 (SVN r13756) - query builder now escapes the single quotes.
-
- fixed in commit:fdecdf92 (SVN r13756) - query builder now escapes the single quotes.
-
- Fixed in commit:e48766e5 (SVN r13755).
-
- Fixed in commit:e48766e5 (SVN r13755).
-
- Is this still true? I tried the print composer on a macbook with William's nightly build (commit:856347c4 (SVN r13598...
-
- fxied in commit:7244c1f1 (SVN r13753).
-
- fxied in commit:7244c1f1 (SVN r13753).
-
- Space after word 'layer' should be removed.
2010-06-19
-
- GRASS UI aspects are covered by #2794, which can be considered a bug. This is more a refactoring request for the rast...
-
- fixed in commit:8872fcb8 (SVN r13751).
-
- fixed in commit:8872fcb8 (SVN r13751).
-
- Qt packaging issue - not a QGIS problem.
-
- Qt packaging issue - not a QGIS problem.
2010-06-18
-
12:25 AM Feature request #2825 (Closed): fTools - Voronoi polygons
- The attached 'patches' allow fTools to produce Voronoi polygons. To ease checking, I have marked new/changed lines in...
-
11:09 AM Feature request #2784: symbol with unique value: label lost on multiple selection&edition
- I applied it against rv1748 but the build fails :
~/rpm/BUILD/qgis/src/app/qgsuniquevaluedialog.cpp:435: erreur: req... -
- Replying to "dr":/issues/show/2551:
> SPIT crashes if path to shapefile contains cyrillic, for example: "d:\\шейп\\".... -
- Replying to "dr":/issues/show/2551:
> SPIT crashes if path to shapefile contains cyrillic, for example: "d:\\шейп\\".... -
- I would be grateful if someone can test or compile for me the correction's proposal for this bug and also for #2784. ...
-
- * Let's have a vector layer, say containing surfaces.
* Go to the layer properties, tab "Label" (2nd one).
* Check ... -
- I believe you miss to click the real "save" button (look for a floppy disk icon) before clicking "ok". Reopen if nece...
-
- I believe you miss to click the real "save" button (look for a floppy disk icon) before clicking "ok". Reopen if nece...
-
- When I've tried to define a custom CRS, the new CRS doesn't appear in the "User Defined Coordinate Systems" list when...
-
- Replying to [comment:5 bonzai]:
> Reoerdering view's fields putting geometry colums last works for me.
> But in my o... -
03:44 AM Bug report #2819: Copied record field mismatch from shapefile to postgis
- Replying to [comment:3 jef]:
> Might the geometry column in postgis not be the last column?
Reoerdering view's fields... -
- Replying to [comment:3 jef]:
> Might the geometry column in postgis not be the last column?
Actually it's not a table... -
- Might the geometry column in postgis not be the last column?
-
- Replying to [comment:1 jef]:
> The field values are assigned in order not by name. Does the attribute order in your... -
- /usr/share/qgis/grass/modules/qgis.d.rast
/usr/share/qgis/grass/modules/qgis.g.info
/usr/share/qgis/grass/bin/qgis.g.... -
- I have trouble to compile QGIS from the sources.
I start by following the instructions of the INSTALL file, chapter ...
2010-06-17
-
- Could you provide an example service url? (Solothurn streetmap does not provide [[GetFeatureInfo]])
-
- Somtimes layer extent in layer properties dialog is displayed in scientific notation....
-
- Fixed in commit:faa8da70 (SVN r13748) (using more decimal places for the extent in the project file)
-
- Fixed in commit:faa8da70 (SVN r13748) (using more decimal places for the extent in the project file)
-
- The field values are assigned in order not by name. Does the attribute order in your postgis table match the order ...
-
- During feature copy (using Ctrl+C Ctrl+V) between shapefile and postgis layers field's values are someway shifted.
O... -
- Using the new rule-based rendering option for symbols, there are no category items in the layer legend. The same is t...
-
- Looks like Qt does only support reading GIFs, but not writing GIFs, but QGIS assumed that it could also write what it...
-
- Looks like Qt does only support reading GIFs, but not writing GIFs, but QGIS assumed that it could also write what it...
-
- Trying to write current mapcanvas as an image of type GIF (using menu 'File/Save as Image') will write a foo.gifw wor...
-
- applied in commit:a77476a4 (SVN r13745) (german translation update in commit:b7ebbf78 (SVN r13746)).
-
- applied in commit:a77476a4 (SVN r13745) (german translation update in commit:b7ebbf78 (SVN r13746)).
-
- Biased proportional symbol are possible in most GIS software, here a few methods :
"/ [[ArcGIS]]":http://www.geog.uc... -
- Should work with v 0.1.11. Please reopen otherwise.
-
- Should work with v 0.1.11. Please reopen otherwise.
-
- fixed in v 0.1.11
-
- fixed in v 0.1.11
-
- Confirmed too. With or without forms, commit:27e451ce (SVN r13725).
-
- I confirm, problem is still here.
No forms, fresh nightly build, new project with only one layer in it.
http://gis-la... -
- Still the problem occurs? I can't reproduce it and have no idea where's the reason.
-
- I tried to re-install completely qgis, also removing settings from windows registry.
But the bug is still here.
-
- Table manager is an external plugin. It doesn't modify the existing layer, it creates a new one and replaces it. It t...
-
- Table manager is an external plugin. It doesn't modify the existing layer, it creates a new one and replaces it. It t...
-
- duplicate of #2775; fixed in commit:b6256d02 (SVN r13743)
-
- duplicate of #2775; fixed in commit:b6256d02 (SVN r13743)
-
- fixed in 13742
-
- fixed in 13742
-
- Thanks. Applied in commit:862209bb (SVN r13741).
BTW [[GnuWin]]32's flex works without that patch on MSVC (and inclu... -
- Thanks. Applied in commit:862209bb (SVN r13741).
BTW [[GnuWin]]32's flex works without that patch on MSVC (and inclu...
2010-06-16
-
- Fixed in commit:711559d1 (SVN r13740)
-
- Fixed in commit:711559d1 (SVN r13740)
-
- Context:
While georeferencing multiple maps with a simple linear transformation.
How to reproduce:
* Using the pl... -
01:25 PM Feature request #2816 (Closed): Allow class rearrangement in the Layer Properties->Style and in t...
- I am using the new symbology editor.
I have a line vector layer from GRASS which represents roads and I classify the... -
- Hi, I've found a few text strings in the UI that are not in the qgis_*.ts file, here is the corresponding .ui :
[[Qg... -
- anyway... this somehow depends by the fact that the GRASS raster provider is no more GDAL?
remember that qgis GRASS ... -
05:24 AM Feature request #2813 (Closed): msvc compilation failure
- Hello,
When trying to compile on msvc, using flex and bison from msys, I'm receiving some error messages regarding t... -
- I also have problems with a 60c while the gpstools work fine. I'll try do further tests.
-
- Hard to reprocude without a 60Csx. To which drive is the virtual serial port of spanner mapped? Does this path appear...
2010-06-15
-
- It can be reproduced on qgis 1.5 using the old symboloy : selecting all the classes and changing the color or border ...
-
- Hi,
The new labeling system doesn't display all the labels of a layer, see the joined file for an example using an i... -
- an: no crash. Debian unstable, qgis self compiled, gdal 1.7 from deb experimental
-
- I get a std::bad alloc, but o crash.
-
09:21 AM Bug report #2810 (Closed): Qgis Trunk (r13619M) crashes applying a a raster style (qml) to GRASS ...
- After loading a raster, I try to apply a previously created raster symbology Style (.qml). This Style file was create...
-
- duplicate of #2810
-
- duplicate of #2810
-
- After importing a raster (and then loading it) through r.in.gdal, I try to apply a previously created raster symbolo...
-
- OK, got it: it's SDA4PP
-
- OK, got it: it's SDA4PP
-
- You are right (as usual): it depends on some plugin - removing the it does not crash, putting them back it does. Now ...
-
- Replying to [comment:13 jef]:
> could you provide a backtrace? Did you try without any plugins?
And a clean ~/.qgis... -
- Replying to [comment:12 pcav]:
> BTW, this bug renders the Image Boundary plugin unusable, if in the origin folder th... -
- BTW, this bug renders the Image Boundary plugin unusable, if in the origin folder there are .tfw or other files.
-
- Identified a problem with Delaunay triangulation. The assumption in the code (doGeometry.py, def delaunay_triangulati...
2010-06-14
-
12:59 AM Bug report #2809 (Closed): Python throws error messages when QGIS will be closed during plugin ma...
- During startup of QGIS the plugin manager looks for plugin updates and new plugins in the connected repositories. Whe...
-
08:00 PM Feature request #2808 (Closed): access wktraster using gdaltools
- The summary pretty much says it all. Using the info in
"it should be possible to have gdaltools work with wktraster... -
- Ok, after some additional testing today, this bug does still exist.
-
- Ok, after some additional testing today, this bug does still exist.
-
- Replying to [comment:7 neumann]:
> Thank you for revisiting this bug.
As you insist: commit:3970b786 (SVN r13733) ha... -
- Replying to [comment:7 neumann]:
> Thank you for revisiting this bug.
As you insist: commit:3970b786 (SVN r13733) ha... -
- this should not be a ftools problem. Please leave further feedback and change the summary if you confirm my observati...
-
- please leave further feedback or close if not replicable
-
- it is also a 3rd party plugin so in any case the problems need to be reported in the qgis-dev mailing list.
-
- it is also a 3rd party plugin so in any case the problems need to be reported in the qgis-dev mailing list.
-
- awaiting Carson reply, I'll push this to 1.6 as in any case there is a workaround
2010-06-13
-
- Valuetool has been fixed to work again with GRASS rasters. The proposed patch has not yet been applied but I guess it...
-
- Valuetool has been fixed to work again with GRASS rasters. The proposed patch has not yet been applied but I guess it...
-
11:03 PM Bug report #2339: QGis crashes when moving border between map canvas and overview map and "use re...
- Replying to [comment:12 lutra]:
> Replying to [comment:11 jef]:
> > might be related to #2714.
>
> if the workaround... -
- Apparently closed with commit:76d2a8fd (SVN r13730)
-
- Apparently closed with commit:76d2a8fd (SVN r13730)
-
- QGIS should support TTF or Opentype for symbol fill patterns in polygons. They would allow for easier color changes o...
-
- I'm not sure that the original description was specific to point symbols only, but perhaps that was the intent. Regar...
-
- I'm not sure that the original description was specific to point symbols only, but perhaps that was the intent. Regar...
-
08:52 AM Feature request #2070: Font support for symbol display
- jctull: I think this bug should be closed. What you describe here is a separate issue. The original bug only dealt wi...
-
- I agree that this is a workable solution. One has to remember to do this before categorizing or setting to graduated....
-
- I agree that this is a workable solution. One has to remember to do this before categorizing or setting to graduated....
-
- This is still a problem. I tried for a better title also.
The open file dialog populates the "Files of type" field w... -
- There is no longer an open dialog progress indicator for me in OS X. Has this been removed in other os's also? Closin...
-
- There is no longer an open dialog progress indicator for me in OS X. Has this been removed in other os's also? Closin...
-
- Fixed (commit:a87414c8 (SVN r13726))
-
- Fixed (commit:a87414c8 (SVN r13726))
-
- I mean #1893
-
- See also 1893
-
- See also #2258
-
- the arbitrary offset part is already implemented in the new symbology. The anchor points would only be an additional ...
-
- This is already partially implemented (the stroke-pattern part) - the stroke-dashoffset part is still missing, but th...
-
- Yes, it crashes also when I have only the .aux:
Error:
GDAL Error 4: @/home/paolo/article.aux' not recognised as a... -
- Paolo and others,
Please do not postpone this to 1.6. I think it is absolutely annoying if you digitize a features a... -
- parts of it (currenDate) is already implemented in print composer. This was also the most urgent one of the proposed ...
-
I try to remove the
qgis.db from .qgis directory.
Restarting qgis the qgis.db was recreate but the problem is again...-
- Replying to [comment:2 aperi2007]:
> So perhaps the real problem is that the list is growing because the srs listed a... -
03:36 AM Bug report #2806 (Closed): ftools.dissolve and geoprocessing.dissolve "loose" polygons
- Both dissolve tools fail on the attached shapefile. Polygons are lost in the process. Compare http://forum.qgis.org/v...
2010-06-12
-
- ...
-
- fixed in commit:27e451ce (SVN r13725).
-
- fixed in commit:27e451ce (SVN r13725).
-
- Yes, but the list after 3 click (3 change of windows) report
wgs 84,
epsg3003
wgs84
epsg3003
wgs84
epsg3003
wgs84
ep... -
- yes, you see the last four coordinate systems in the list (or less if you have used less than 4).
-
- yes, you see the last four coordinate systems in the list (or less if you have used less than 4).
-
- Opening the Project Properties,
and going to Coordinate reference Systems.
In the recente used I can see one (or two)... -
- OK. I misunderstood purpose of "Sync from Map" (could someone change it's wording to "Sync rotation from map"?).
Sti... -
- OK. I misunderstood purpose of "Sync from Map" (could someone change it's wording to "Sync rotation from map"?).
Sti... -
- Just tested with last version of qgis 1.5 trunk.
Yes, I confirm it.
I start qgis, uncheck the option
"by default n...
Also available in: Atom