Activity
From 2009-09-09 to 2009-10-08
2009-10-08
-
04:02 PM Bug report #1959: Trunk build fails with sip-4.9 and PyQt-4.6
- Replying to [comment:8 jef]:
> Replying to [comment:7 vince]:
> > This is not OS dependent, it is caused by a change ... -
- Replying to [comment:7 vince]:
> This is not OS dependent, it is caused by a change of API between SIP 4.8 and 4.9. T... -
- Replying to [comment:7 vince]:
> This is not OS dependent, it is caused by a change of API between SIP 4.8 and 4.9. T... -
10:15 AM Bug report #1668 (Closed): it's not possible to rebuild the toolbar in the mapcomposer
- Fixed in commit:7da03a83 (SVN r11776)
-
- Fixed in commit:7da03a83 (SVN r11776)
-
- fixed in commit:afc55a1d (SVN r11773)
-
- fixed in commit:afc55a1d (SVN r11773)
-
08:49 AM Bug report #1942: Allow more decimal/integer places in the labels font size selector
- sorry I mean #1972
-
- The same is true when map units are meters. In this case the problem is the opposite as it is necessary to define lab...
-
- see #1942
-
- see #1942
-
06:34 AM Bug report #1986 (Closed): fTools basics stats randomly crashes qgis
- Using basic stats from the ftools Tools on a shapefile with strings and reals datas randomly crashes qgis with a segf...
-
- Fixed in commit:d726cb98 (SVN r11770)
-
- Fixed in commit:d726cb98 (SVN r11770)
2009-10-07
-
- Replying to [comment:2 lroubeyrie]:
> and sure when clicking "cancel" I expect the layers to be here (in the legend ... -
- When I say the canvas is not updated, it's to point a inconsistency between the canvas and the layer tree (legend), a...
-
- It is enough to pan or zoom and the layers do disappear in the canvas.
The following question is, what we expect to... -
- After adding some layers, clicking on "New project" but canceling the dialog box will remove all the layers in the la...
-
10:10 PM Bug report #1959: Trunk build fails with sip-4.9 and PyQt-4.6
- This is not OS dependent, it is caused by a change of API between SIP 4.8 and 4.9. The version of SIP should be tested.
-
09:02 PM Bug report #1959: Trunk build fails with sip-4.9 and PyQt-4.6
- Replying to [comment:5 vince]:
> Ah, apologies, I just cut/pasted out of a tcl script (Macports), where some characte... -
- I would say that this bug is the same of #1942, just on the other end.
If you agree I will close this as duplicate a... -
- Replying to [comment:6 lutra]:
> Hi,
> did you made any further test?
> Can you relate your problem with the behaviou... -
- Replying to [comment:4 vince]:
> You're right, it does only happen for a single layer and a single projection. Bad lu... -
- Fixed in commit:48402812 (SVN r11767)
-
- Fixed in commit:48402812 (SVN r11767)
-
- should be fixed in commit:4ed28f36 (SVN r11763)
-
- should be fixed in commit:4ed28f36 (SVN r11763)
-
- >If I add an image to a map composer, the icon remains pressed, and nothing happens until I click on the page
Yes, t...
2009-10-06
-
01:01 AM Bug report #1758 (Feedback): Tools (Ftools): clip and difference tools give the same results
- Now clip and difference seem to give the same result
-
- Now clip and difference seem to give the same result
-
- All the module belonging to the v.out.* category seem to give the same result.
This is still valid with the lastest ... -
- I don't know why the trac replicated 3 times this ticket opened by me
-
- I don't know why the trac replicated 3 times this ticket opened by me
-
- I don't know why the trac replicated 3 times this ticket opened by me
-
- I don't know why the trac replicated 3 times this ticket opened by me
-
- I have seen this popping out on a Vista machine of a friend... just once while working in the legend, without annoyin...
-
- Ah, apologies, I just cut/pasted out of a tcl script (Macports), where some characters must be escaped. The right com...
-
- I tried the above suggestion, but got an error with the sed command. My sed knowledge is not enough to sort out the i...
-
03:56 AM Bug report #1984 (Closed): QGIS Doesn't send VERSION parameter on WMS getCapabilities request
- Hi,
Althought not mandatory in WMS specs, the VERSION parameter has become important since most WMS servers now offer... -
02:34 AM Feature request #1983 (Closed): Visual notice of scale-based layer visibility
- It would be nice if the layer/legend manager gave a visual representation
of scale-based layer visibility.
For exa...
2009-10-05
-
- Try this on the python/core directory:...
-
- Tested on qgis trunk on Debian and Ubuntu.
Open the print composer, choose A0 as paper size, compse the map and then... -
- Tested on qgis trunk on Debian and Ubuntu.
Open the print composer, choose A0 as paper size, compse the map and then... -
- Tested on qgis trunk on Debian and Ubuntu.
Open the print composer, choose A0 as paper size, compse the map and then... -
- Right - if I do the same in a different projection, this does not appear.
-
- not reproducable here. Are you projecting to the same CRS your data is in?
-
- Load a [[SpatiaLite]] layer; enable on the fly reprojection; the layer is no longer shown on the canvas. If you load ...
-
- When loading a raster, if you select the ILWIS filter for file names (*.mpr/mpl), files with extension mpr are not sh...
-
- duplicate of #1668
-
- duplicate of #1668
-
- In the print composer window, if you right-click on the menu bar, you can make the menu bar disappear. I did not find...
-
- Hi,
I noticed that while trying open a quite big shapefile
http://www.iucnredlist.org/resources/spatial/mammals/cet... -
- This feature was already requested already in the middle of some discussion here in the Trac :) very useful indeed +1
-
06:35 AM Feature request #1975 (Closed): ability to create legend groups via the QGis api
- Using the QGis API it is possible to add layers to the currently opened project using the function addMapLayer() of t...
-
06:10 AM Feature request #1974 (Closed): Enable render caching where possible
- User story 1:
Joe is reordering layers, each of which points back to a postgis database with thousands of records. E...
2009-10-04
-
- Replying to [comment:1 jctull]:
> With qt-4.5.3, this appears to be fixed.
I jumped the gun. Still unable to build w... -
- Replying to [comment:1 jctull]:
> With qt-4.5.3, this appears to be fixed.
I jumped the gun. Still unable to build w... -
- With qt-4.5.3, this appears to be fixed.
-
- With qt-4.5.3, this appears to be fixed.
2009-10-03
-
- I found a way to easy replicate the behaviour. I guess.
Open a new project, in my case by default it opens in wgs84... -
- You're right, it does only happen for a single layer and a single projection. Bad luck, the layer is not free so I ca...
-
- Fixed with r commit:943a3122 (SVN r11747)
-
- Fixed with r commit:943a3122 (SVN r11747)
-
08:15 AM Feature request #1973 (Closed): Projet name has to be separate of the QGIS version in the title b...
- In the title bar of the main window, title of the project (or name of the project file) appear just after the name of...
-
- As you can see on the capture, toolbar buttons are note resized to match icons size. There's always a lot of unused p...
-
- I cannot set the size of labels to more than 99 units. While it seems crazy to print labels of 1000 font point size, ...
2009-10-02
-
- Furthermore, adding a valid path does not persiste across images (if I add a second image, I have to add my path again)
-
- If I add an image to a map composer, the icon remains pressed, and nothing happens until I click on the page. If I tr...
-
- This should be related to your GRASS version (too old) - please try with a grass64. Thanks.
-
- This should be related to your GRASS version (too old) - please try with a grass64. Thanks.
-
- Not replicable here. Can you check in which condition does this happen? Only with particular data or projections mayb...
-
- In 1.3.0, the area measurement tool sometimes goes daft. Proof on the attached screenshot.
-
- It does not work as expected, but given that there is a simple workaround, I would classify this as minor
-
09:48 PM Feature request #1970 (Closed): label placement
- When using the placement option from a Data Field the left and right are swapped.
ie, a field that says left puts th... -
12:48 PM Bug report #1921 (Closed): Unexpected clearing of QgsApplication::mPkgDataPath
-
- Replying to "torstenosgeo":/issues/show/1966:
> Hallo,
Auch Hallo ;)
> it is temporarely possible to install grass6... -
- Not a QGIS issue: the package is not aligned to testing. Please note that the package is not official, and until we'l...
-
- Not a QGIS issue: the package is not aligned to testing. Please note that the package is not official, and until we'l...
-
- See #1966
-
- See #1966
2009-10-01
-
- Replying to [comment:1 lutra]:
> is this duplicate of #1965? reopen if necessary
I meant #1964 -
- is this duplicate of #1965? reopen if necessary
-
- is this duplicate of #1965? reopen if necessary
-
12:12 AM Bug report #1965 (Closed): qgis crashes after start
- Package: qgis
Version: 1.3.0~gfossit20090914-1
Severity: important
Hallo,
qgis crashes after start. On the console I... -
- What prevents us from applying this patch?
-
12:39 AM Feature request #1968 (Closed): change icon for OGR Layer Converter plugin
- Currently the plugin OGR Layer Converter is presented with the "GDAL" icon. Perhaps it is better to change it so it d...
-
- Done with buildvrt, in GDAL tools plugin https://trac.faunalia.it/GdalTools-plugin
-
- Done with buildvrt, in GDAL tools plugin https://trac.faunalia.it/GdalTools-plugin
-
- Package: grass
Version: 6.4.0~rc4-3
Severity: normal
Hallo,
I get the error/warning messages:
v.label: /usr/lib/libi... -
- Package: qgis
Version: 1.1.0~gfossit20090602-1
Severity: normal
Hallo,
it is temporarely possible to install grass6.... -
- Hallo,
qgis crashes after start. On the console I get the following messeges:
qgis
/usr/bin/qgis.bin: /usr/lib/libidn... -
11:46 AM Bug report #1963 (Closed): "Ghost Lines" when using Anti-aliasing, polygons with shared boundarie...
- QT's anti-aliasing output exhibits an inherent limitation of AA, where polygon edges are drawn/feathered twice and th...
-
- I dont think these are a good candidate - the icons are tiny and there are no 'source' files in order to allow us to ...
-
- Applied in commit:77c03ad4 (SVN r11741). Many thanks.
-
- Applied in commit:77c03ad4 (SVN r11741). Many thanks.
-
- int8_classify.patch fixes the problem in both 'graduated' and 'continuos' thematizations.
reviews welcome. -
- additional note, the type query returns 'int8' as looks to be expected by code in qgspostgresprovider.cpp constructor.
-
- Sorry, another thing I haven't specified is that data access is trough postgres.
That's where 'bigint' and 'numeric' ... -
- Forgot to mention the dataset source:
ftp://ftp.gwdg.de/pub/linux/intevation/freegis/worlddata/ -
- While playing a bit with freegis country data r1 I found that qgis symbology manager
doesn't allow to use fields of t...
2009-09-30
-
11:46 AM Bug report #1961 (Closed): Relative path with spatialite driver
- Hi all,
On the qgis 1.4.0 trunk (windows Vista).
I see the option to save project with relative path don't work wit... -
- It would seem appropriate adding these sets of icons:
http://projects.opengeo.org/geosilk
http://blog.opengeo.org/2... -
- A field calculator is available from
commit:59a486bd (SVN r11736) on (more operators will follow)
Marco -
- A field calculator is available from
commit:59a486bd (SVN r11736) on (more operators will follow)
Marco -
02:57 AM Bug report #1796: Multi-line text in a SVG file is not drawn correctly in Print Composer
- Replying to [comment:6 mhugent]:
> This is most likely a bug in the Qt svg code
Marco, are you able to report this o... -
- This is most likely a bug in the Qt svg code
2009-09-29
-
- Build errors out on OS X using latest sip and pyqt releases (also qt-4.5.2-cocoa):
...
Creating qgisconfig.py...
Don... -
- again sorry for the noise, I tought it was already solved in a previous revision.
-
- Replying to [comment:4 lutra]:
> I have to reopen this after having done the same for #1864.
right, and I close this... -
- Replying to [comment:4 lutra]:
> I have to reopen this after having done the same for #1864.
right, and I close this... -
- I have to reopen this after having done the same for #1864.
Add a GRASS layer, uncheck "save relative paths" and sav... -
- I have to reopen this after having done the same for #1864.
Add a GRASS layer, uncheck "save relative paths" and sav... -
- right, I didn't compiled in the last days and I tought it was already solved. Thanks.
-
- Replying to [comment:2 lutra]:
> Sorry to have to reopen this ticket, but saving with relative paths seems not work a... -
- Replying to [comment:2 lutra]:
> Sorry to have to reopen this ticket, but saving with relative paths seems not work a... -
-
- Sorry to have to reopen this ticket, but saving with relative paths seems not work any more, at least under Linux (te...
-
- Sorry to have to reopen this ticket, but saving with relative paths seems not work any more, at least under Linux (te...
-
- I have to reopen this ticket because I'm seeing this behaviour again (under Ubuntu 9.04, both qgis 1.3 from repo and ...
-
- I have to reopen this ticket because I'm seeing this behaviour again (under Ubuntu 9.04, both qgis 1.3 from repo and ...
2009-09-28
-
01:59 AM Bug report #1958 (Closed): [OS X] crash when digitizing on MacOS X Leopard with snapping toleranc...
- When adding points on a vector layer with the toggle editing mode, Qgis 1.3 crashes on Mac OS X if snapping is not se...
-
01:36 AM Feature request #1957 (Closed): Use right-click drag for panning and center on mouse pointer on w...
- I use Josm for OpenSteetMap editing and I find two mouse behaviour very useful:
* Use the right-click and drag to pa... -
- As far I know, GPX files should use the WGS84 spatial reference system, as stated here:
http://www.topografix.com/GPX... -
- applied in commit:4b87fbff (SVN r11732). Thanks.
-
- applied in commit:4b87fbff (SVN r11732). Thanks.
-
04:18 PM Bug report #1955 (Closed): QGis segfaults unless I am root
- QGis Stable(qgis-1.0.2-1.fc11.i586) on Fedora 11 with Grass 6.3.0-12.fc11.i586 will run as root but segfaults at star...
-
- added in commit:ed34b139 (SVN r11730)
-
- added in commit:ed34b139 (SVN r11730)
-
09:41 AM Feature request #1954 (Closed): Save SpatiaLite connections in QGIS projects
- QGIS works great on opening projects with relative paths to datasources. But this does not work for [[SpatiaLite]] la...
-
- Confirmed on Debian unstable with commit:e2beee91 (SVN r11721)
2009-09-27
-
07:57 AM Bug report #1953 (Closed): Missing copyright in CMake modules
- Most of the [source:trunk/qgis/cmake@11650 [[FindXXX]] modules] for CMake include neither copyright notice nor refer ...
-
- Ok, this is caused by a Grass problem. Sorry for the noise.
-
- Ok, this is caused by a Grass problem. Sorry for the noise.
-
- Er, no, but where is that supposed to be? Also, can a lock file lock a fresh new dataset?
-
- hi,
did you checked if you have a lock file? -
- There is no way I can open a Grass database, even when created in Qgis. I get the message "Already opened", and nothi...
2009-09-26
-
- I cannot replicate the problem under ubuntu 32 bit with qgis trunk. Can you post a sample to be tested by others?
-
07:45 AM Bug report #1950 (Closed): Python binary choice on OS X (10.6) / Building bug
- I'm just reclosing this to apply a more meaningful resolution, as the issues were all outside of Qgis.
-
- I'm just reclosing this to apply a more meaningful resolution, as the issues were all outside of Qgis.
-
-
- Well, I found the trick. There was two problems at stake:
1. The python Framework installed by Macports is incomplet... -
- Well, I found the trick. There was two problems at stake:
1. The python Framework installed by Macports is incomplet...
2009-09-25
-
- confirmed on Vista 32 bit with the lastest dev version available with the osgeo4w installer. Should we file the "Vist...
-
- fixed
-
- fixed
-
- If I drag a tif file from the file manager to open QGIS - it produces an error.
http://gis-lab.info/images/screensho... -
- Replying to [comment:13 kyngchaos]:...
-
- > On the other hand, similarly to what I did with Grass, I can use install_name_tool to change the reference inside t...
-
- BTW, there is maybe another solution to the Python framework problem. With -framework Python, ld accepts also -F {FRA...
-
- Replying to [comment:10 kyngchaos]:
> I looked into the cmake python detection, and it's two separate steps - the lib... -
- I looked into the cmake python detection, and it's two separate steps - the library and the executable. The executab...
-
- I got it, and you were right:...
-
- Replying to [comment:7 kyngchaos]:
> But, is it _configured_ and compiled with your python in the PATH? At runtime, ... -
- > That's what I did. In my .cshrc, /usr/pkg/bin is leading in the path, so:
But, is it _configured_ and compiled wit... -
- Replying to [comment:3 vince]:
> Ok, I've got that. The LC_ID_DYLIB field in the various Grass libs is wrong (points... -
- From offlist, fixed by installing current frameworks. non-issue.
-
- From offlist, fixed by installing current frameworks. non-issue.
2009-09-24
-
- Replying to [comment:4 kyngchaos]:
> As I said: add your Python bin folder to the PATH before configuring Qgis.
Tha... -
- > Okay, so let me put it another way: I have two Python frameworks. One is the Apple default, the other is the new 2....
-
- > > Otherwise, I don't get the Grass plugin, but maybe it's because I lack gdal-grass.
> Qgis uses the GRASS librari... -
- Thanks for that quick answer.
Replying to [comment:1 kyngchaos]:
> Works fine in the Xcode project build. locale_ch... -
- > First, the build fails in spatialite.c. It appears that OS X 10.6, or my configuration, does not like the call to "...
-
- As usual, and after a summer break, I'm back on porting Qgis to Macports. I selected the new release 1.3.0.
First, t... -
04:14 PM Feature request #1949: Ability to select features by polygon
- Thanks for the help, I didn't see that option. However that option also uses intersects to select the features. Plus ...
-
- Hi,
did you tested the "select by location" tool in the "tools -> research tools" menu? -
- I tried the select plus plugin, but it does not have the function to select features that lie fully within a polygon....
-
- I tried the select plus plugin, but it does not have the function to select features that lie fully within a polygon....
-
11:11 AM Bug report #1176: Transverse mercator south orientated projections not supported
- Replying to [comment:10 halfhaggis]:
> I'm not sure what the right approach to fixing this in qgis is, but using the ... -
08:41 AM Bug report #1945: [Vista] Qgis crashes removing GRASS raster layer from map canvas
- Hi pcav,
with 1.4.0 (dev) it works fine on XP now, thanks.
On Vista32 and Vista64 it still crashes.
2009-09-23
-
- Oh thanks for the plugin hint. But yes very strange that these features are not in core, or at least bundled with the...
-
11:02 PM Feature request #1948: Ability to deselect features
- Maybe it would be better to have the [[PlugIn]] Functions in the QGIS Core?
I think lots of users don't know much abo... -
- use the "select plus" plugin
-
- use the "select plus" plugin
-
- Having the ability to deselect all selected features would be nice.
-
- the "select by polygon" feature already exist.
-
- the "select by polygon" feature already exist.
-
- The ability to select vector features that are "fully" contained within a user defined polygon.
-
- I would like the ability to create a vector scratch layer for storing temporary features that are in the process of b...
-
- When performing a numerical vertex edit on a shape polygon the action does not get registered in the undo/redo stack....
-
- Please test with a very recent version (dev): this should have been fixed
-
- Replying to [comment:2 neumann]:
> Further investigation shows that it has to do with the Postgis provider and the_ge... -
- Replying to [comment:2 neumann]:
> Further investigation shows that it has to do with the Postgis provider and the_ge... -
07:16 AM Bug report #1935: Crash when setting edit widget in layer properties dialogue/attribute tab to im...
- Further investigation shows that it has to do with the Postgis provider and the_geom column. Attributes/columns befor...
2009-09-22
-
- I installed QGIS Mimas 1.3.0 (OSGeo4W setup, advanced installation with qgis-grass-plugin 1.0.2-2 and grass 6.4.0svn3...
-
- Replying to [comment:3 jpalmer]:
> How about modifying the [[QgsPostgresProvider]]::setSubsetString method to recheck... -
- Replying to [comment:3 jpalmer]:
> How about modifying the [[QgsPostgresProvider]]::setSubsetString method to recheck... -
- The case I was wanting to implement already involves a view. It would be useful to use the where cause to show differ...
-
- The case I was wanting to implement already involves a view. It would be useful to use the where cause to show differ...
-
- s/to/so/
-
- the where clause can be changed later, to the id needs to be unique even without the where clause. An alternative wo...
-
- the where clause can be changed later, to the id needs to be unique even without the where clause. An alternative wo...
-
02:06 PM Bug report #1944 (Closed): Cannot upload more than one changed node with OSM provider
- After having downloaded a small area of [[OpenStreetMap]] data (about 100 features), making one change (say a polygon...
-
- Fixed in
-
- Fixed in
-
- This is weird.
I'm using qgis 1.3 and 1.4 trunk under Ubuntu 9.04
I apparently see no problems (with or without OTF... -
05:50 AM Feature request #1943: ftools/buffer produce result shape with wrong crs parameters
- Replying to [comment:1 lutra]:
> Hi,
>
> what version of qgis are you using?
>
> Here on 1.3 seems to have no probl... -
- Hi,
what version of qgis are you using?
Here on 1.3 seems to have no problems. -
- When buffering a shapefile that has epsg 21781 (CH1903) with ftools buffer, the resulting shapefile is lacking the to...
2009-09-21
-
05:14 PM Bug report #1942 (Closed): Allow more decimal/integer places in the labels font size selector
- In order to create labels on a feature in geographic CRS, you must have a font size >= 0.01 degrees (which is about 8...
-
- Replying to [comment:3 cmoe]:
> The layers that I tested, have the geometry column on second place, maybe there is so... -
- Replying to [comment:3 cmoe]:
> The layers that I tested, have the geometry column on second place, maybe there is so... -
- Replying to [comment:2 jef]:
> Is it just a different order of attributes or do fieldnames and content get mixed up?
... -
- Is it just a different order of attributes or do fieldnames and content get mixed up?
-
07:21 AM Bug report #1941 (Closed): save as shapefile leads to disordered attributes (PostGIS)
- 1. load a postgis layer
2. save the loaded layer as shapefile
3. open attribute table
=> the resultant attribut... -
- Apparently fixed in
-
- Apparently fixed in
-
04:20 AM Bug report #1574: Displaying ECW raster images is very slow
- confirmed, 1.3.0: now it's MUCH faster!
2009-09-20
-
- ...
-
- ...
-
10:12 PM Bug report #1940 (Closed): OpenStreetMap plugin - getMainWindow
- I would like to test the [[OpenStreetMap]] plugin with QGis 1.3.0 (11643:11644) . It occurs the following python erro...
-
- Replying to "lutra":/issues/show/1916:
> This is the message that appears under windows (Vista, Xp) when clicking (ev... -
- Replying to [comment:2 lutra]:
> Replying to [comment:1 jef]:
> > Just left clicking doesn't do it here.
>
> Here to... -
- Replying to [comment:2 lutra]:
> Replying to [comment:1 jef]:
> > Just left clicking doesn't do it here.
>
> Here to... -
- QGIS queries the provider, if I can delete attributes. Depending on it's response the buttons are enabled or disable...
-
- QGIS queries the provider, if I can delete attributes. Depending on it's response the buttons are enabled or disable...
-
- applied in commit:0e4c5229 (SVN r11693). Thanks.
-
- applied in commit:0e4c5229 (SVN r11693). Thanks.
-
02:18 PM Feature request #1939 (Closed): Use ${CMAKE_DL_LIBS} instead of dl for library dependencies
- All platforms do not require linking against libdl; [[NetBSD]] is one example. Therefore, it is incorrect to hardcod...
-
- I should add that when I try to deleted the records that have "ERROR", qgis becomes unresponsive. CTRL-C does not wo...
-
- I am using r11960 on Ubuntu amd64.
I selected several features in the "Open Attribute Table" window and clicked on...
2009-09-18
-
- Internal [[SpatiaLite]], yes. Patch underway (thanks Alessandro Furieri!).
-
- Replying to "pcav":/issues/show/1937:
> A [[SpatiaLite]] db cannot be opened - when opening it throws an error.
Work... -
- A [[SpatiaLite]] db cannot be opened - when opening it throws an error.
-
07:30 AM Feature request #1936 (Closed): SpatiaLite: support subset string
- This patch adds support for subset strings (SQL where clause) in [[SpatiaLite]] layers to limit the dataset....
2009-09-17
-
- An interesting note from Giovanni Pasini:
With a single band raster map (eg. topographical black/white map) if there... -
- Seems that this problem is OGR-related. OGR can't delete fields
-
- Confirmed on Windows XP Pro SP3: I can create a new field but can't delete any existing field - Delete button is disa...
-
- If one opens the layer properties dialogue --> Attribute Tab --> Edit Widget --> Separate Dialogue --> choose "immuta...
2009-09-16
-
- I compiled latest SVN trunk on Ubuntu amd64.
Steps to reproduce:
1) open vector layer
2) open layer properties
3) g... -
- The method [[QgsPostgresProvider]]::uniqueData within qgspostgresprovider.cpp should be updated to use the SQL where ...
-
- looks an easy fix
-
- if you compose a map in the map composer, the file produced misses a png or jpg etc. extension. Looks an easy fix
-
- ah, and btw I'm using 11659
-
- sorry, it is a mess with those [BR]s, still don't understand why simple <enter> doesn't work as a new line in trac
-
- Now it doesn't crash, but if you choose such location
http://gis-lab.info/images/screenshots/20090916--13kb.jpg
it ... -
07:04 AM Bug report #1929: transparency of 0 value do not apply to GDAL virtual rasters (vrt)
- Replying to [comment:2 pcav]:
> See the attached image: I set up 100% transparency on 0 value, but the white collars ... -
- Hi,
I tested also a different tiff/vrt on ubuntu 9.04 with qgis 1.3 installed from the ubuntugis repositories. Trans... -
- it works fine here with sp3, but I install only trough osego4w, not standalone.
2009-09-15
-
- Please chack again after commit:43408110 (SVN r11561), which might fix it
-
- See the attached image: I set up 100% transparency on 0 value, but the white collars are still shown.
Debian, QGIS co... -
- Paolo,
I just fired up your vrt dataset on a linux box (Ubuntu 9.04 - stock GDAL) running QGIS trunk .
In the col... -
- If I load a virtual raster (BW, TIFF) and I apply full transparency to value 0 (to remove collars),
the areas=0 remai... -
08:29 PM Bug report #1926: QGIS Daphnis doesn't run
- I just installed Daphnis in Win XP2 and it is running perfectly. Some one knows if Daphnis doesn't run in Win XP SP3
-
04:36 AM Bug report #1930 (Closed): OSM layer has missing road
The OSM plugin seems to have missed a road in Lancaster. It's a roundabout. I can't get home if it's not there :)
...
2009-09-14
-
05:09 AM Bug report #1928 (Closed): Custom CRS def'n fails if name contains an apostrophe
- Hi,
Using 1.2.0 I am trying to define a custom CRS. In this case it is [[OpenStreetMap]] data which uses the infamou...
2009-09-12
-
- Replying to [comment:3 carfog81]:
> Replying to [comment:1 lutra]:
> > This you used the standalone installer or the ... -
- Replying to [comment:1 lutra]:
> This you used the standalone installer or the osgeo4w one? Did you had any previous ...
2009-09-11
-
- Replying to "carfog81":/issues/show/1926:
> (Could not start the application because the configuration is incorrect. ... -
- Replying to "carfog81":/issues/show/1926:
> (Could not start the application because the configuration is incorrect. ... -
- This you used the standalone installer or the osgeo4w one? Did you had any previous version already installed?
-
- After install QGIS Daphnis on Win XP SP3 in Spanish, it doesn't run, it shows the follow error:
"C:\\Archivos de p... -
08:31 PM Feature request #1927 (Closed): Some possible improvements about row selection on attribute table
- I think the row selection on attribute table can be improved in some ways:
1. Dragging the vertical header should se... -
11:41 AM Feature request #1925 (Closed): GDAL raster import does not see *.dt1 or *.dt2 DTED files
- GDAL seems to support DTED files with DT1 & DT2 extension but the QGIS file extension selection filter only shows fil...
-
- First, make sure you installed the correct Qgis for your system - Leopard.
There was possibly a problem in the SQLit... -
06:28 AM Bug report #1924 (Closed): QGIS 1.1.0-3 (dmg) and Mac OS X 10.5.8 : a crash a launch - Sept. 11, ...
- Dear Sir :
Please find enclosed a PDF file concerning my issue to alunch QGIS in the1.1.0-3 version.
SQLite3 not fo...
2009-09-10
-
- duplicate of #1668
-
- duplicate of #1668
-
- I have a user who did a right click on the Print Composer toolbar and then clicked on the checkbox (which has no desc...
2009-09-08
-
01:26 AM Feature request #1824 (Feedback): Make the Ctrl++ Ctrl+- shortcuts to zoom, not just change the tool
- I'm re-opening this because
I find the current behavior (just changing the
cursor icon to + or - but not actually doi... -
- I'm re-opening this because
I find the current behavior (just changing the
cursor icon to + or - but not actually doi... -
- Please note the important point of having a colorbar
indicating the meaning of the colors. Not sure if this sugggesti...
Also available in: Atom